Problems with preview video with BM ultrastudio mini monitor and AE CC 2014

Hi,
We don´t have video preview option for BM ultrastudio mini monitor with AE CC 2014.
Anybody knows a solution for this? We have installed 10.1 drivers version of BM.
Thanks a lot.

There is a slightly newer 10.1.1 version of drivers available from Blackmagic:
http://www.blackmagicdesign.com/support
Thanks for posting the screenshot. This shows that After Effects does not see the Mercury Transmit plug-in for Blackmagic. You should verify whether the plug-in is present:
os drive/Library/Application Support/Adobe/Common/Plug-ins/7.0/MediaCore/
The file will be named DeckLinkTransmit.bundle, or something similar.
If the file is present, try uninstalling and reinstalling the (latest version of) Blackmagic drivers.
If After Effects still does not recognize the Blackmagic Mercury Transmit plug-in, open Premiere Pro CC 2014 and check Preferences > Playback, and whether or not video preview works there.

Similar Messages

Problems with two new LCD monitors and my G5 Power Mac

I bought two of these Westinghouse Digital LCD monitors:
http://www.macaddict.com/issues/2005/11/reviews/lcm
When I plugged in the first one, my Mac's power-on light was on, but the Power Mac G5 (1.6 ghz, 1.25 gb RAM) wouldn't boot and the light wouldn't go off. No problems once I unplugged the first LCD monitor. I plugged it into the second one and the Mac turned on once it was plugged in, but at least I had an image. But the computer was frozen; I unplugged and re-plugged it into the first LCD and had an image, but again, it was frozen.
Any ideas why this is happening? I'm going VGA into the DVI via Apple's adaptor.
Help and thanks,
Heath McKnight
Power Mac G5 1.6 ghz Mac OS X (10.3.9) Single processor, 1.25 gb RAM, 80 gb hard drive

Okay, well this is interesting. If I take the brightness down too much, I see "ghosting" on EVERYTHING, including text. Also, when I shut down the Mac with monitor 2 plugged in, the one that when I plug in the LCD it turns the Mac on, it restarts the computer. I did this twice to insure I wasn't just hitting restart by accident. I'm calling tech support Monday (Westinghouse) and I think I'm taking these "good on paper" 16x9 LCDs back to Best Buy for a full refund. Then, I'll buy something different. I'm bummed out...
heath

Problems with HP Pavillion 23xi Monitor and MBP (early 2011)

Hi all,
I'm having some strange issues regarding the connection between my new HP Pavillion 23xi and my Macbook Pro 13'' (early 2011, with Yosemite installed). I'm connecting these to through a Minidisplay Port (Thunderbolt) to HDMI adapter and of course, an HDMI cable. When all the connections are set up, and the resolution is 1080p (as the Mac's Monitor preferences say), the monitor is all black, and sometimes the immages appear for just a second; when I "downsize" (from the Mac) the resolution to 720p the monitor works well, although I cannot see all the desktop (seems like the image is cropped) and, of course, the image is not in full HD.
So, because of this, I'm excluding a cable/adapter problem, otherwise I think the monitor wouldn't work neither in 720p, but I cannot figure out why it doesn't work in 1080p.
Hope I'll get some answers
Best regards,
Giusepperot

Hello @Giusepperot,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how your HP monitor is having problems connecting to your MacBook Pro, and I would be happy to guide you towards a resolution!
According to this document on using HP Monitors on a Mac:
"HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
I hope this helps!
Best Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

FW problem with Apogee Duet, Yamaha monitors, and external FW800 HD...

Recently purchased an Apogee Duet and Logic Express 8. Love it so far but there's a cracking noise coming out of the Yamaha monitors when I turn on the external HD via FW800. The Duet is connected via FW400.
It'll be nice to solve this issue. The digital/cracking noise is annoying. It's almost unworkable. Additionally, I use the external FW800 as my recording drive so it's crucial. I guess the FW bus is overloaded. Is an express/34 card the only option? If so, any recommendations.
Besides this, the Duet sounds awesome w/out the FW800 HD plugged in.
Thanks, mT.

I'm having the same issue -- lots of crackly digital noise coming through my studio monitors (but not through the headphones). The noise, I find, is particularly loud when the 48v is on. Is that the case with you? I initially discovered the issue while trying to record with an AKG C 451 B condenser. When the mic was getting phantom via the Duet, I was getting digital crackling. However, when I put a preamp between the condenser and the Duet (in this case a UA Solo/610) and had the preamp supply the 48v, the crackling was gone. So: is this an issue with the FW or an issue with the Duet's phantom power?
(I'm using the Duet with Logic Pro 8)

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck

I am have problems with the ipad mini, it is a little crazy. It controls by itself, opens and closes application zooms in and out, end my facetime calls, Also Un certain part of the screen is no longer responsive to the touch.

I am have problems with the ipad mini, it is a little crazy. It controls by itself, opens and closes application zooms in and out, end my facetime calls, Also Un certain part of the screen is no longer responsive to the touch, it Should be having so much problems. Thanks for your help.
iPad, iOS 7.0.4

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Hi! I 've a problem with my ipad mini. Does anyone know if there is a way to get out from recovery mode without reinstall iOS?

Hi! I 've a problem with my ipad mini. Does anyone know if there is a way to get out from recovery mode without reinstall iOS?

Many thanks Deggie! I think my iPad has a big problem because is not possible to restore it....I downloaded the most upgraded version of iOS but when I try to restore an error message occurs (4005)......

Hi i have problem with my hp mini is giving me a error CNU9391WZR PLEASE HELP

Hi i have problem with my hp mini is giving me a error CNU9391WZR PLEASE HELP
Hp mini 110 1140el

Yes bios password, i forgot my windows password so im trying to reset to manufacturing settings but keeps asking me for bios password... Please help

Unable to find the UK HP technical helpline for my unresolved problem with my HP Mini Notebook

I am unable to find the UK HP technical helpline for my unresolved problem with my HP Mini Notebook, I seem to keep going round in circles on the web site. Can anyone please give me the UK HP technical helpline number. My 'No Disk Error has not been resolved as yet. Thank you if anyone can help. Jan

Hi, Jan:
Below is the telephone contact info you need...
In-Warranty & Out-of-Warranty
0207 660 0596
(Only valid within the UK)
Mon-Fri 8.30-18.00
Sat 10.00-16.00
(except for Bank Holidays)

I have continuous problems with my iPad Mini, and it is getting worse! Newstand application keep pausing or crashing, websites keep hanging first time in but then open fine the second time, and I have problems with applictions crashing.

I have continuous problems with my iPad Mini, and it is getting worse! Newstand application keep pausing or crashing, websites keep hanging first time in but then open fine the second time, and I have problems with applictions crashing. Has anyone experienced similar problems and any suggestions?

Has the device always behaved this way? Did this start as a result of an update to the iOS software? If the problem is that bad, you should probably restore the iOS software and then restore from a backup. If that fails, restore as new and rebuild the device. If that fails, it's time for a trip to an Apple Store to let them have a look at the iPad.
Use iTunes to restore your iOS device to factory settings

I have a problem with my Mac Mini. I dont remember my user password. How can i retreive it?

I have a problem with my Mac Mini. I dont remember my user password. How can i retreive it?

Mac OS X 10.6 Help- If you forget your administrator password
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and OS X Lion- Apple ID can be used to reset your user account password.

FCP video monitoring through AJA's T-Tap or UltraStudio Mini Monitor

Hello,
I'm working with dailies that are ProRes LT 2K resolution (2048 x 1152) for an offline cut. I'd like to use an HDTV 1080P for a video monitor (a regular HDTV, not a broadcast monitor). From what I understand, I can use either a T-Tap or an UltraStudio Mini Monitor converter to send video signals to the TV set from FCP.
Before I start buying this stuff, I just want to confirm with people on this forum who has experience with these set ups. My question has 2 parts:
1. Does this set up work or do I need to get other gears? (FCP out to converter through Thunderbolt and HDMI to HDTV)
2. I'm leaning toward the UltraStudio Mini Monitor mainly because of cost. I don't foresee getting a 2K monitor any time soon, so I wouldn't need the T-Tap for that purpose. However, since I'm working with 2K materials, and the HDTV is 1080P, can the Mini Studio convert (or down-res) it to 1080?
Thanks in advance.
Thien

I can only speak to the T-Tap...that's all I've tested. It works great with FCP...and AJA works with 2K footage, scaling it down to 1080. I'm not sure if the mini monitor does this, or if you need the Decklink 4K for that.
No other converters are needed. That's all you need....either one.
I will say that AJA has a better track record of compatibility...they seem to be the first ones there with drivers for the new software and updates, and the most stable with edit systems. And their tech support is top notch. That, to me, is worth the extra cost.
Contact Tech Support at AJA.com and ask them if it will work wiht 2K footage in FCP...they'll give you an answer.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Problem with the browse sequence back and browse sequence next widget placed in the screen layout

Hi,
Some basics: We are using Robohelp 10 to generate multiscreen html5 output. We used the pharmaceutical screen layout downloaded from: http://helpx.adobe.com/robohelp/robohelp-screen-profiles-layouts.html but modified it to match our GUI.
We are having a problem with the browse sequence back and browse sequence next buttons placed in the screen layout from the widgets tool bar. We are in no way experts at this part of Robohelp...and the css portion of all this is a bit of mystery but we have managed to get mostly what we need. Now we just need these buttons to work. In the past we used Airhelp and things worked great. Can anyone help us understand why the sequence buttons are not showing up in the output even though it does in the topic preview?
Also
This shows up in the layout.css file:
a.wBSBackButton {
                margin: 0 8pt 0 0;
                padding: 0;
                background-color: transparent;
img.wBSBackButton {
                border: none;
a.wBSNextButton {
                margin: 0 8pt 0 0;
                padding: 0;
                background-color: transparent;
img.wBSNextButton {
                border: none;
Also btw, I forgot to mention that we are linking our FrameMaker files.
Appreciate the help.
Thanks!

hi pradeep
It does not happen but if you Wait for a while that may be solved

Updated Illustrator CC to CC 2014, having problems with CC performance. Slow and does not quit

Updated Illustrator CC to CC 2014, having problems with CC performance. Slow and does not quit. What can be causing the issue?

Hello, please checkout my post concerning lagging issues.
I've also provided a link to a video I've recorded showing the Illustrator behavior on my iMac 27"
Adobe Illustrator Cs6 Lagging Extremely Slow on Yosemite 27" iMac i7 late 2013

Problems with preview video with BM ultrastudio mini monitor and AE CC 2014

Similar Messages

Maybe you are looking for