Problems with syncing calender with MobileMe after upgrading to v2..01

Hello everyone,
I am using MobileMe with my iPhone and everything worked well. Mail, contacts, calender push-synced beautifully after the initial MobileMe hickups were sorted out.
I upgraded to v2.01 today and everything worked fine, except that my calenders don't sync properly. All my calender events are pushed 7 hours back when synced to my iPhone. This is only on the iPhone. Calender in MobileMe and on my Macbook show the correct times.
Suggestion or advice would be aprreciated!
Carlo

I went to an apple store and nobody could tell me a way to proceed. They said that Yosemite just came out and it is too early for them to know and they need time to figure it out One of them mentioned an update that would be ready for today but he didn't seem so convinced. I read somewhere that signing out of iCloud on the other device (Ipad in that particular case) and signing back in worked for him, but I still haven't made that move yet...afraid of loosing the organization pattern I created with my documents with pages in my Ipad and a afraid of the posible scnario of having to move my word documents manually to pages just the way I have it now. For now I think it is prudent to wait to see if apple solves this, but in the long term something needs to be done cause iCloud for me with pages is useless right now. I hope this inspires a solution for you and you get your music back ASAP. I have faith in the apple guys...I hope they will fix this soon. Good Luck!!

Similar Messages

  • Problem with connecting to free wifi after upgrading to Windows 8.1 from Windows 8

    Hi
    I had problems with connecting to free Wifi after upgrading my PC(Notebook) to Windows 8.1 from Windows 8. As I travel a lot within europe, I am used to being able to connect to Free Wifi(those that dont need a key or password to enter) but soon after downloading
    Windows 8.1 I almost never was able to do this. I'd always get «LIMITED» even though the signal was strong.This was so fustrating,so much so that I reset my PC to clear it of Windows 8.1 and am now back to Windows 8.This is a shame because I was really liking
    using Windows 8.1 and if not for this problem(which is a big one) I'd still be using it. If I download Windows 8.1 again from the Windows store what is the probability that I'll have the same problems?
    Thanks Portozzygirl

    More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
    http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
    http://captaindbg.com/how-to-update-drivers-on-windows-7/   (works on win 8 too)
    Wanikiya and Dyami--Team Zigzag

  • Problem with WCS Audit status missmatch after upgrade

    We had problem with wcs Audit status missmatch after upgrade to 7.0.164.3  WLC : 6.0.188.0.
    how I can fix the problem?

    Hi,
    Try pinging the WCS from the WLC and vice versa and then try again to refresh config from controllers.. then follow the below if its still not happening..
    Please forwrd the trace level logs from the WCS (Specifically WCS0.0.TXT logs) while recreating the issue!!
    Regards
    Surendra

  • Are you having problems with the Lacie external drive after upgrading to the new operating system

    Are you having problems with the Lacie external drive after upgrading to OS X Mavericks?

    See here for everyone discussing the issue you are having:
    https://discussions.apple.com/thread/5475136?tstart=0

  • Lync for mac (lync_14.0.7_131205) crashes with EXC_BAD_ACCESS at start up after upgrade to 10.9.2 (13C64)

    Lync for mac (lync_14.0.7_131205) crashes with EXC_BAD_ACCESS at start up after upgrade to 10.9.2 (13C64)
    I have removed and clean installed, including certs (http://technet.microsoft.com/en-us/library/jj945448%28v=office.14%29.aspx).  There is no "unknown" cert either.
    This is what I get:
    Microsoft Error Reporting log version: 2.0
    Error Signature:
    Exception: EXC_BAD_ACCESS
    Date/Time: 2014-02-25 21:24:24 +0000
    Application Name: Microsoft Lync
    Application Bundle ID: com.microsoft.Lync
    Application Signature: UCCP
    Application Version: 14.0.7.131205
    Crashed Module Name: CoreFoundation
    Crashed Module Version: 855.14
    Crashed Module Offset: 0x00012192
    Blame Module Name: Microsoft Lync
    Blame Module Version: 14.0.7.131205
    Blame Module Offset: 0x00f02d02
    Application LCID: 1033
    Extra app info: Reg=English Loc=0x0409
    Crashed thread: 0 

    Please check if Lync for Mac 14.0.6 works correctly.
    The following is a similar thread you can refer to:
    http://social.technet.microsoft.com/Forums/lync/en-US/1ea7487f-5ded-4713-93c8-1abd594aea74/lync-for-mac-2011-crashing-since-update-to-1407?forum=ocsclients
    Lisa Zheng
    TechNet Community Support

  • Problem updating to iphoto 9.6 after upgrading to Yoesmite  I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

    problem updating to iphoto 9.6 after upgrading to Yoesmite  I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

    "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
    This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
    Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
    If iPhoto  is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
    http://www.apple.com/support/mac/app-store/contact/

  • Previously used overdrive media console to download audio books now i get an error message when trying to sync to iphone 4 after upgrading to 10.5 itunes and 5.0 on iphone unable to download audiobook states cannot play on iphone and does not convert

    previously used overdrive media console to download audio books now i get an error message when trying to sync to iphone 4 after upgrading to 10.5 itunes and 5.0 on iphone unable to download audiobook states cannot play on iphone and does not convert

    previously used overdrive media console to download audio books now i get an error message when trying to sync to iphone 4 after upgrading to 10.5 itunes and 5.0 on iphone unable to download audiobook states cannot play on iphone and does not convert

  • Problems to reconize the sim card after upgrade itunes, what should I do???

    Problems to reconize the sim card after upgrade itunes, what should I do???

    Get a SIM card from the carrier to whom the phone is legitimately locked.

  • Problem with scanning in Photoshop CS6 after upgrading to Mountain Lion

    After upgrading to latest version of Mountain Lion i've got a problem with scanning directly into Photoshop CS6.
    on the previous Lion version when I wanted to scan something, i just opened Photoshop -> File -> Import -> images from device
    then a new window opened up the ImageCapture app where I could choose the device I wanted to use, and then I selected the scanner (Canon CanoScan 8400F) and I could scan directly into photoshop.
    Now with Mountain Lion when I do the exact same thing, it opens a window, but it's impossible to select any device, as the new window is just a plain white window, with 2 buttons on top to rotate something that isn't there. (text is in dutch, cause I'm from the Netherlands)
    hope someone can help me out.
    I can scan with the use of the ImageCapture app without problems and then save that picture and open it in Photoshop, but it has worked before, so am I doing something wrong? or is this just a little bug
    thnx in advance for the help

    I’m having the same problem with my Epson Perfection 3200 Photo scanner and Adobe Photoshop CS6. It does the initial overview scan then I get the same blank window as BigNoud shows above. I've done a Software Update and have also updated OSX to 10.8.1.
    I know for the Epson you can get a Mountain Lion compatible scan software from SilverFast for about $35.00 as an upgrade here.
    I haven't gone that route yet as I don't want to give up any more money for my Apple/Adobe experience.
    Any help would be appreciated.

  • Problem with ADF Security / SQL Authenticator after upgrade to 11.1.1.6

    Hi,
    We have an ADF application built with JDeveloper 11.1.1.2 that's been in production for a couple of years. Now we are in the process of upgrading to 11.1.1.6 so I have upgraded WLS and ADF in a test environment and re-deployed the application there. The application uses users and groups from database using SQL Authenticator configured in WLS. This worked fine in the old version but now after the upgrade we can't log in with credentials from the database. I can log in if I add a user to the default authenticator. We didn't touch any of the authenticator settings or security realm configurations during the upgrade. Both authenticators are marked as SUFFICIENT, as they have always been.
    Has something changed in the way SQL Authenticator is used since 11.1.1.2? What could be the problem?
    Regards,
    Joonas

    Answering myself here: after recreating the SQL Authenticator and the ADF Security configuration logins are working again. Don't know where the problem was though.

  • Problems with result area in workbooks after upgrade to BW 3.5

    Hi,
    we are experiencing some problems with our <b>workbooks</b> after the upgrade to BW 3.5. When refreshing all queries in a workbook (that was there before 3.5) without selecting a specific query we get the message <b>'Result area</b> cannot be found, specify a new one'. After selecting, the message appears again in an infinite loop.
    Has anybody had similar problems and has found a solution for this?
    Thanks,
    EMS

    Hi,
    I am having that message, always if I delete a Sheet which contains an embeded query.
    Even the sheet is deleted, the SAPBEX has information of all the embeded queries, and tries to find the Result area to put the data.
    To find out if this is your case as well,
    select an empty cell in a Sheet and continue like that, until all the embeded queries are been displayed.
    Regards
    Vasso
    Message was edited by: VASSILIKI SIAGRI

  • Problem with PO text in ME22 after upgrade

    Hi,
    I face an issue in Purchase Order Text. We have recently done the upgrade from SAP 4.6 C to SAP ECC 6.0. Before upgrade, the users were entering required texts in ME22 transaction for each item and select the check button available. All the text types ticked here are carried forward and printed on the Delivery output.
    After upgrade, this tick is removed from all the existing documents and also for the new POu2019s users select this button and save it. But, when they come back and see it in change mode ME22, the tick is not available. Because of this issue, these texts are not printed in delivery outputs now.
    I have checked this problem in SAP. No relevant notes are available. Has anyone faced this issue before? Can you please throw some light on the same?
    Thanks and Regards
    Vijayakrishna

    Hi
    Please, see these notes
    Note 751441 - Consulting: Settings for texts from purchase order
    Note 53593 - Q&A - Delivery text from stock transfer order
    Note 417883 - Texts from purchase order
    and related notes. They talk about how to copy text from PO to delivery (for instance, in SC, STO and so on). It's related with some customizing steps in VOTXN and some VOFM subroutines that perhaps they are lost after the upgrade.
    I hope this help you
    Regards
    Eduardo
    Edited by: E_Hinojosa on Aug 24, 2011 10:22 AM

  • I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

    After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this? 

    If you have this product,
    http://www.symantec.com/business/support/index?page=content&id=TECH165159
    you have to go back to Snow Leopard.
    To re-install SL, back up your home directory, format and re-install.

  • Problems with Camera Raw 6.7 after upgrading to OS 10.8

    I've been using Photoshop CS 5 with Camera Raw 6.7 on my MacBook Pro with no issues until I recently upgraded to OS 10.8. Now my Canon CR2 files (shot with a Canon G15) won't open.  Does anyone know of a solution or work-around for this problem? 

    thanks for the prompt response...i appreciate it.  according to the link you listed, that's correct.  the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
    so it's clearly an issue related to the "upgrade" of the os.  seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it!  thanks again.

  • Problem: linking iTunes to Photoshop Elements after upgrading to iOS 7.3.4 to sync iPad to Albumns in Organiser.

    Since upgrading to iOS 7.0.3.4 I can link to Folders but not to Albums in Photoshop Elkements 11.
    Is Apple aware of this bug and can we expect that it will be corrrected in due course?
    Has anyone got a fix?
    I can Export Albums from Organiser to Adobe Revel and then iTunes recognises the Album - but Revel only recognises JPEG files and they have to be small as exporting is such a slow process.
    I can import a PDF file to my iPad containing a photo slide show previously created with Elements Organiser - it finds its way to the Books app.

    Thanks:  I did not make it clear that the acquisition of Revel was subsequent to the onset of my problem - Revel is an attempt to work around the problem.
    When using iOS 6 the link from iPad to Photosdhop Elements  - Organiser - Albums via iTunes worked perfectly - I could sync iPad with iTunes no trouble. Upgrade to iOS 7 and iTunes - Photos showed the title of the Album but contained no photos. After exporting an Album from Orgniser to Revel the photos automatically re-appeared in the iTunes albums list.
    Have you any other suggestions?
    DesMLR

Maybe you are looking for

  • How to upgrade my mackbookpro from 10.5.8 to date

    how to upgrade my mackbookpro from 10.5.8 to date

  • Mailing to a group of contacts

    MacBook Pro 10.4.8 Is it possible to send an e-mail, say to 20 people, and set up the e-mail so that the recpients do not see the rest of the distribution list i.e. it is as if the e-mail was only sent to one person? If you cannot do this natively in

  • Formatting problem in Scripts

    Hi, If i make the Fontsize into bold or increasing the size using character format , it doesnot reflect in my Printing and Printpreview also. What is the problem and how can i solve this problem? Thanks, Neptune.M

  • ASO CUBE CLEARING DELAY

    Hi All, I have an ASO cube that is aggregated to about 5gigs. When I "CLEAR ALL DATA" its taking in excess of 10-15mins, which seems a rather long time. Is this normal? I'm sure in the past it wasn't doing this. Thanks Paul

  • Office mail account ID says error BB Q10

    HI, Tried to setup my office mail in my new device bbq10. i tried with advance setup imap and pop. but both showing error that there is no response from the mail server. i was usiing my office mail in all my other bb devices witout any problem. Help