Problems with sytax in srcpac.conf

Hey guys.
I'm trying to build Emacs, with Info pages, using srcpac. I have succeded in doing this by manually editing the PKGBUILD but would like the advantages that srcpac brings.
However.
I'm struggling with the syntax of srcpac.conf. Here's what I've tried. (Note the correct --infodir=/home/michael addition at the end):
conf_emacsX22.1=('#./configure --prefix=/usr --sysconfdir=/etc --libexecdir=/usr/lib \
--localstatedir=/var --mandir=/usr/man --without-sound -with-x-toolkit=gtk#./configure --prefix=/usr --sysconfdir=/etc --libexecdir=/usr/lib \
--localstatedir=/var --mandir=/usr/man --without-sound -with-x-toolkit=gtk --infodir=/home/michael#')
Then in a terminal:
srcpac -So emacs
This produces the following error:
/etc/srcpac.conf: line 20: syntax error near unexpected token `'#./configure --prefix=/usr --sysconfdir=/etc --libexecdir=/usr/lib \
--localstatedir=/var --mandir=/usr/man --without-sound -with-x-toolkit=gtk#./configure --prefix=/usr --sysconfdir=/etc --libexecdir=/usr/lib \
--localstatedir=/var --mandir=/usr/man --without-sound -with-x-toolkit=gtk --infodir=/home/michael#''
/etc/srcpac.conf: line 20: ` --localstatedir=/var --mandir=/usr/man --without-sound -with-x-toolkit=gtk --infodir=/home/michael#')'
I've searched Arch wiki and forum, read the man pages and googled but couldn't find the required information. If someone could help, even just point me in the right direction, I'd appreciate it.
Update: Since writing this post I've just found a way to prevent pacman stripping info pages usings ABS and editing makepkg.conf. However I would still appreciate a little advice or pointers on the required syntax for future reference.
Thanks for taking the time to read this post.
Last edited by chimaera_felon (2007-12-24 12:08:35)

Similar Messages

Problems with Yaourt and makepkg.conf

Hi all,
So, I've recently switched all the way over to Arch Linux after playing around with it for some time. And it's been great! I am very glad I did it.
I've been using yaourt to install all of my humble indie bundle games, and it's been going well until I tried to install mark of the ninja.
Every time I try to install ANYTHING on yaourt now, I get these types of error messages:
[nicholas@nicholas ~]$ yaourt -s markoftheninja-hib
1 aur/markoftheninja-hib 1.38+h20131002-1 (4)
Mark of the Ninja, a side-scrolling stealth game (Humble Bundle version)
==> Enter n° of packages to be installed (ex: 1 2 3 or 1-3)
==> -------------------------------------------------------
==> 1
/etc/makepkg.conf: line 89: for: command not found
==> Downloading markoftheninja-hib PKGBUILD from AUR...
x markoftheninja-hib.desktop
x PKGBUILD
markoftheninja-hib 1.38+h20131002-1 (Wed Sep 11 20:25:29 EDT 2013)
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
/etc/makepkg.conf: line 89: for: command not found
==> WARNING: Running makepkg as an unprivileged user will result in non-root
ownership of the packaged files. Try using the fakeroot environment by
placing 'fakeroot' in the BUILDENV array in /etc/makepkg.conf.
==> markoftheninja-hib dependencies:
- sdl (already installed)
- libgl (already installed)
- gcc-libs (already installed)
- xdg-utils (already installed)
==> Continue building markoftheninja-hib ? [Y/n]
==> --------------------------------------------
==>
==> Building and installing package
/etc/makepkg.conf: line 89: for: command not found
==> WARNING: Running makepkg as an unprivileged user will result in non-root
ownership of the packaged files. Try using the fakeroot environment by
placing 'fakeroot' in the BUILDENV array in /etc/makepkg.conf.
==> ERROR: markoftheninja-hib is not available for the '' architecture.
Note that many packages may need a line added to their PKGBUILD
such as arch=('').
==> ERROR: Makepkg was unable to build markoftheninja-hib.
==> Restart building markoftheninja-hib ? [y/N]
==> -------------------------------------------
==>
[nicholas@nicholas ~]$ sudo gedit /etc/makepkg.conf
So, I already have fakeroot properly activated IN makepkg.conf. This is my makepkg.conf setup:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync --no-motd -z %u %o'
'scp::/usr/bin/scp -C %u %o'
'hib::/usr/bin/find /home/nicholas/Downloads -name $(echo %u | cut -c 7-) -exec ln -s \{\} %o \; -quit')'
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CPPFLAGS="-D_FORTIFY_SOURCE=2"
CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4"
CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
#MAKEFLAGS="-j2"
#-- Debugging flags
DEBUG_CFLAGS="-g -fvar-tracking-assignments"
DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(fakeroot !distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- staticlibs: Leave static library (.a) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
#-- debug: Add debugging flags as specified in DEBUG_* variables
OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Log files: specify a fixed directory where all log files will be placed
#LOGDEST=/home/makepkglogs
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# COMPRESSION DEFAULTS
COMPRESSGZ=(gzip -c -f -n)
COMPRESSBZ2=(bzip2 -c -f)
COMPRESSXZ=(xz -c -z -)
COMPRESSLRZ=(lrzip -q)
COMPRESSLZO=(lzop -q)
COMPRESSZ=(compress -c -f)
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
Here is line 89, which is the one that yaourt flags:
- Options to be used when stripping binaries. See `man strip' for
It's almost as if it is treating "for" as a command. This is very strange.
Also, I do have the architecture specified in the makepkg. It doesn't matter which package I try to install: it does the same thing.
Does anyone have any ideas? I'd really appreciate your help.
Thank you.
Sincerely,
Corey Goettsch

Karol,
Thank you for the suggestion. Here are the code outputs
[nicholas@nicholas ~]$ yaourt -S markoftheninja-hib
/etc/makepkg.conf: line 89: for: command not found
==> Downloading markoftheninja-hib PKGBUILD from AUR...
x markoftheninja-hib.desktop
x PKGBUILD
markoftheninja-hib 1.38+h20131002-1 (Wed Sep 11 20:25:29 EDT 2013)
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
/etc/makepkg.conf: line 89: for: command not found
==> WARNING: Running makepkg as an unprivileged user will result in non-root
ownership of the packaged files. Try using the fakeroot environment by
placing 'fakeroot' in the BUILDENV array in /etc/makepkg.conf.
==> markoftheninja-hib dependencies:
- sdl (already installed)
- libgl (already installed)
- gcc-libs (already installed)
- xdg-utils (already installed)
==> Continue building markoftheninja-hib ? [Y/n]
==> --------------------------------------------
==>
==> Building and installing package
/etc/makepkg.conf: line 89: for: command not found
==> WARNING: Running makepkg as an unprivileged user will result in non-root
ownership of the packaged files. Try using the fakeroot environment by
placing 'fakeroot' in the BUILDENV array in /etc/makepkg.conf.
==> ERROR: markoftheninja-hib is not available for the '' architecture.
Note that many packages may need a line added to their PKGBUILD
such as arch=('').
==> ERROR: Makepkg was unable to build markoftheninja-hib.
==> Restart building markoftheninja-hib ? [y/N]
==> -------------------------------------------
==>
[nicholas@nicholas ~]$ sudo gedit /etc/makepkg.conf
[sudo] password for nicholas:
(gedit:2211): Gtk-WARNING **: Theme parsing error: notebook.css:6:13: Theming engine 'unico' not found
(gedit:2211): Gtk-WARNING **: Theme parsing error: nemo.css:90:13: Theming engine 'unico' not found
And this is my makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync --no-motd -z %u %o'
'scp::/usr/bin/scp -C %u %o'
'hib::/usr/bin/find /home/nicholas/Downloads -name $(echo %u | cut -c 7-) -exec ln -s \{\} %o \; -quit')'
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CPPFLAGS="-D_FORTIFY_SOURCE=2"
CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4"
CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
#MAKEFLAGS="-j2"
#-- Debugging flags
DEBUG_CFLAGS="-g -fvar-tracking-assignments"
DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(fakeroot !distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- staticlibs: Leave static library (.a) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
#-- debug: Add debugging flags as specified in DEBUG_* variables
OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Log files: specify a fixed directory where all log files will be placed
#LOGDEST=/home/makepkglogs
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# COMPRESSION DEFAULTS
COMPRESSGZ=(gzip -c -f -n)
COMPRESSBZ2=(bzip2 -c -f)
COMPRESSXZ=(xz -c -z -)
COMPRESSLRZ=(lrzip -q)
COMPRESSLZO=(lzop -q)
COMPRESSZ=(compress -c -f)
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
And, last, here is the output from line 89:
#-- Options to be used when stripping binaries. See `man strip' for details.
So, the problem is that "for" in line 89 is being treated like a command. Which is very strange. Also, I already have fakeroot set up in makepkg.conf. And, last, I also have the architecture specified in the PKGBUILD. So, I'm a bit at a loss here. I would really appreciate any help.

Arch64 ati radeon 3870 radeonhd driver. Problem with xorg.conf.

I've got a small problem with my xorg. I won't hide that i'm not a xorg nerd and i've used the automatic xorg tool to generate the xorg.conf. After starting X, the screen goes black and then after ~5 seconds montior switches to power-saving mode.
So here we go.
That's xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "record"
Load "dri2"
Load "dbe"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "Radeon HD 3870"
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card1"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "Radeon HD 3870"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
and that's the log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux kasia 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 21 20:31:45 2009
(++) Using config file: "xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Card1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x1d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(!!) More than one possible primary device found
(--) PCI: (0:1:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xd0000000/268435456, 0xf7000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
(--) PCI: (0:2:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeonhd"
(II) Loading /usr/lib/xorg/modules/drivers//radeonhd_drv.so
(II) Module radeonhd: vendor="AMD GPG"
compiled for 1.6.0, module version = 1.2.5
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
RV505 : Radeon X1550, X1550 64bit.
RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
RV535 : Radeon X1300, X1650.
RV550 : Radeon X2300 HD.
RV560 : Radeon X1650.
RV570 : Radeon X1950, X1950 GT; FireGL V7400.
R580 : Radeon X1900, X1950; AMD Stream Processor.
R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
RV620 : Radeon HD 3450, HD 3470.
RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
FireGL V3600/V5600.
RV635 : Radeon HD 3650, HD 3670.
RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
R680 : Radeon HD 3870 X2.
M52 : Mobility Radeon X1300.
M54 : Mobility Radeon X1400; M54-GL.
M56 : Mobility Radeon X1600; Mobility FireGL V5200.
M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
M62 : Mobility Radeon X1350.
M64 : Mobility Radeon X1450, X2300.
M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
M68 : Mobility Radeon X1900.
M71 : Mobility Radeon HD 2300.
M72 : Mobility Radeon HD 2400; Radeon E2400.
M74 : Mobility Radeon HD 2400 XT.
M76 : Mobility Radeon HD 2600;
(Gemini ATI) Mobility Radeon HD 2600 XT.
M82 : Mobility Radeon HD 3400.
M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
RS600 : Radeon Xpress 1200, Xpress 1250.
RS690 : Radeon X1200, X1250, X1270.
RS740 : RS740, RS740M.
RS780 : Radeon HD 3100/3200/3300 Series.
RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
R700 : Radeon R700.
M98 : Radeon M98 Mobility.
RV730 : Radeon HD4670, HD4650.
M96 : Radeon M96 Mobility.
RV710 : Radeon HD4570, HD4350.
(II) RADEONHD: version 1.2.5, built from dist of git branch master, commit cb54f48b
(II) Primary Device is:
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] 1 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[8] 1 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[9] 1 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[12] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[13] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
[14] 1 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[15] 1 0 0x000003c0 - 0x000003df (0x20) IS[b]
(==) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(0): Selected ShadowFB.
(II) RADEONHD(0): Unknown card detected: 0x9501:0x1458:0x21A4.
If - and only if - your card does not work or does not work optimally
please contact [email protected] to help rectify this.
Use the subject: 0x9501:0x1458:0x21A4: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(0): Detected an RV670 on an unidentified card
(II) RADEONHD(0): Mapped IO @ 0xf7000000 to 0x7f39ca36f000 (size 0x00010000)
(II) RADEONHD(0): PCIE Card Detected
(II) RADEONHD(0): Getting BIOS copy from PCI ROM
(II) RADEONHD(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1458 SubsystemID: 0x21a4
IOBaseAddress: 0xa000
Filename: Test.bin
BIOS Bootup Message:
GV-RX387512HP_F10
(II) RADEONHD(0): Default Engine Clock: 825000
(II) RADEONHD(0): Default Memory Clock: 900000
(II) RADEONHD(0): Calling ASIC Init
(II) RADEONHD(0): ASIC_INIT Successful
(II) RADEONHD(0): Analog TV Default Mode: 1
(II) RADEONHD(0): Found default TV Mode NTSC
(II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR aperture.
(II) RADEONHD(0): Using only 262144kB of the total 524288kB.
(--) RADEONHD(0): VideoRAM: 262144 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 16
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0x1fffc000
(II) RADEONHD(0): AtomBIOS requests 16kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x1fffc000
(WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area 536854528 (size: 16384) extends beyond available framebuffer size 268435456
(II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEONHD(0): Default Engine Clock: 825000
(II) RADEONHD(0): Default Memory Clock: 900000
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): Direct rendering not officially supported on R600 and up
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f80
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f80
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(0): Detected VGA mode.
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_TV, "7PIN_DIN TV1 CV", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP2", RHD_DDC_0, RHD_HPD_1, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_DACA } }
(--) RADEONHD(0): Attaching Output TMDS A to Connector DVI-I 1
(--) RADEONHD(0): Attaching Output DAC B to Connector DVI-I 1
(--) RADEONHD(0): Attaching Output DAC B to Connector TV 7PIN_DIN
(--) RADEONHD(0): Attaching Output TMDS B to Connector DVI-I 2
(--) RADEONHD(0): Attaching Output DAC A to Connector DVI-I 2
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/digital for Output TMDS A
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/analog for Output DAC B
(II) RADEONHD(0): RandR: Adding RRoutput TV_7PIN_DIN for Output DAC B
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/digital for Output TMDS B
(II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/analog for Output DAC A
(II) RADEONHD(0): Output DVI-I_1/digital using monitor section Monitor0
(II) RADEONHD(0): Output DVI-I_1/digital has no monitor section
(II) RADEONHD(0): Output DVI-I_1/analog has no monitor section
(II) RADEONHD(0): Output TV_7PIN_DIN has no monitor section
(II) RADEONHD(0): Output DVI-I_2/digital has no monitor section
(II) RADEONHD(0): Output DVI-I_2/analog has no monitor section
(II) RADEONHD(0): TMDS A: Sensed Output: DVI
(II) RADEONHD(0): Setting TMDS A to incoherent
(II) RADEONHD(0): I2C device "RHD I2C line 1:E-EDID segment register" registered at address 0x60.
(II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" registered at address 0xA0.
(II) RADEONHD(0): EDID data for W2253
(II) RADEONHD(0): Manufacturer: GSM Model: 56dc Serial#: 385315
(II) RADEONHD(0): Year: 2009 Week: 5
(II) RADEONHD(0): EDID Version: 1.3
(II) RADEONHD(0): Digital Display Input
(II) RADEONHD(0): Max Image Size [cm]: horiz.: 49 vert.: 32
(II) RADEONHD(0): Gamma: 2.20
(II) RADEONHD(0): DPMS capabilities: StandBy Suspend Off
(II) RADEONHD(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEONHD(0): First detailed timing is preferred mode
(II) RADEONHD(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) RADEONHD(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
(II) RADEONHD(0): Supported established timings:
(II) RADEONHD(0): 720x400@70Hz
(II) RADEONHD(0): 640x480@60Hz
(II) RADEONHD(0): 640x480@75Hz
(II) RADEONHD(0): 800x600@56Hz
(II) RADEONHD(0): 800x600@60Hz
(II) RADEONHD(0): 800x600@75Hz
(II) RADEONHD(0): 832x624@75Hz
(II) RADEONHD(0): 1024x768@60Hz
(II) RADEONHD(0): 1024x768@75Hz
(II) RADEONHD(0): 1280x1024@75Hz
(II) RADEONHD(0): 1152x870@75Hz
(II) RADEONHD(0): Manufacturer's mask: 0
(II) RADEONHD(0): Supported standard timings:
(II) RADEONHD(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) RADEONHD(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEONHD(0): #2: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) RADEONHD(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEONHD(0): Supported detailed timing:
(II) RADEONHD(0): clock: 138.5 MHz Image Size: 510 x 290 mm
(II) RADEONHD(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
(II) RADEONHD(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
(II) RADEONHD(0): Supported detailed timing:
(II) RADEONHD(0): clock: 148.5 MHz Image Size: 510 x 290 mm
(II) RADEONHD(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) RADEONHD(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
(II) RADEONHD(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 150 MHz
(II) RADEONHD(0): Monitor name: W2253
(II) RADEONHD(0): EDID (in hex):
(II) RADEONHD(0): 00ffffffffffff001e6ddc5623e10500
(II) RADEONHD(0): 0513010380312078eaee91a3544c9926
(II) RADEONHD(0): 0f5054a76b80b3008180818f714f0101
(II) RADEONHD(0): 0101010101011a3680a070381f403020
(II) RADEONHD(0): 3500fe221100001e023a801871382d40
(II) RADEONHD(0): 582c4500fe221100001c000000fd0038
(II) RADEONHD(0): 4b1e530f000a202020202020000000fc
(II) RADEONHD(0): 0057323235330a202020202020200081
(II) RADEONHD(0): EDID vendor "GSM", prod id 22236
(II) RADEONHD(0): Using EDID range info for horizontal sync
(II) RADEONHD(0): Using EDID range info for vertical refresh
(II) RADEONHD(0): Printing DDC gathered Modelines:
(II) RADEONHD(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync +vsync (66.6 kHz)
(II) RADEONHD(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync +vsync (67.5 kHz)
(II) RADEONHD(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEONHD(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEONHD(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEONHD(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEONHD(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEONHD(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEONHD(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEONHD(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEONHD(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEONHD(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEONHD(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEONHD(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEONHD(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEONHD(0): Output DVI-I_1/digital connected
(II) RADEONHD(0): Output DVI-I_1/analog disconnected
(II) RADEONHD(0): Output TV_7PIN_DIN disconnected
(II) RADEONHD(0): Output DVI-I_2/digital disconnected
(II) RADEONHD(0): Output DVI-I_2/analog disconnected
(II) RADEONHD(0): Using exact sizes for initial modes
(II) RADEONHD(0): Output DVI-I_1/digital using initial mode 1920x1080
(II) RADEONHD(0): RandR 1.2 support enabled
(==) RADEONHD(0): RGB weight 888
(==) RADEONHD(0): Default visual is TrueColor
(==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEONHD(0): Using 1920x1920 Framebuffer with 1920 pitch
(II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size = 0x00E10000)
(**) RADEONHD(0): Display dimensions: (490, 320) mm
(**) RADEONHD(0): DPI set to (99, 152)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) RADEONHD(0): Using ShadowFB
(==) RADEONHD(1): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(1): Selected ShadowFB.
(II) RADEONHD(1): Unknown card detected: 0x9501:0x1458:0x21A4.
If - and only if - your card does not work or does not work optimally
please contact [email protected] to help rectify this.
Use the subject: 0x9501:0x1458:0x21A4: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(1): Detected an RV670 on an unidentified card
(II) RADEONHD(1): Mapped IO @ 0xf5000000 to 0x7f39ca36f000 (size 0x00010000)
(II) RADEONHD(1): PCIE Card Detected
(II) RADEONHD(1): Getting BIOS copy from PCI ROM
(II) RADEONHD(1): ATOM BIOS Rom:
SubsystemVendorID: 0x1458 SubsystemID: 0x21a4
IOBaseAddress: 0x0000
Filename: Test.bin
BIOS Bootup Message:
GV-RX387512HP_F10
(II) RADEONHD(1): Default Engine Clock: 825000
(II) RADEONHD(1): Default Memory Clock: 900000
(II) RADEONHD(1): Calling ASIC Init
(II) RADEONHD(1): ASIC_INIT Successful
(II) RADEONHD(1): Analog TV Default Mode: 27049664
(II) RADEONHD(1): The detected amount of videoram exceeds the PCI BAR aperture.
(II) RADEONHD(1): Using only 262144kB of the total 524288kB.
(--) RADEONHD(1): VideoRAM: 262144 kByte
(II) RADEONHD(1): Framebuffer space used by Firmware (kb): 0
(WW) RADEONHD(1): rhdAtomGetFbBaseAndSize: AtomBIOS specified VRAM scratch space size invalid
(II) RADEONHD(1): default to: 20480
(II) RADEONHD(1): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEONHD(1): Default Engine Clock: 825000
(II) RADEONHD(1): Default Memory Clock: 900000
(II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(1): Maximum Pixel Clock: 400000
(II) RADEONHD(1): Reference Clock: 27000
(II) RADEONHD(1): Direct rendering not officially supported on R600 and up
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(1): Reference Clock: 27000
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 2" initialized.
(II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f80
(II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f80
(II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(1): I2C bus "RHD I2C line 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(1): Detected VGA mode.
(II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(1): Maximum Pixel Clock: 400000
(II) RADEONHD(1): Reference Clock: 27000
(II) RADEONHD(1): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
(II) RADEONHD(1): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
(II) RADEONHD(1): Connector[0] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
(II) RADEONHD(1): Connector[1] {RHD_CONNECTOR_TV, "7PIN_DIN TV1 CV", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
(II) RADEONHD(1): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP2", RHD_DDC_0, RHD_HPD_1, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_DACA } }
(--) RADEONHD(1): Attaching Output TMDS A to Connector DVI-I 1
(--) RADEONHD(1): Attaching Output DAC B to Connector DVI-I 1
(--) RADEONHD(1): Attaching Output DAC B to Connector TV 7PIN_DIN
(--) RADEONHD(1): Attaching Output TMDS B to Connector DVI-I 2
(--) RADEONHD(1): Attaching Output DAC A to Connector DVI-I 2
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_1/digital for Output TMDS A
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_1/analog for Output DAC B
(II) RADEONHD(1): RandR: Adding RRoutput TV_7PIN_DIN for Output DAC B
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_2/digital for Output TMDS B
(II) RADEONHD(1): RandR: Adding RRoutput DVI-I_2/analog for Output DAC A
(II) RADEONHD(1): Output DVI-I_1/digital using monitor section Monitor1
(II) RADEONHD(1): Output DVI-I_1/digital has no monitor section
(II) RADEONHD(1): Output DVI-I_1/analog has no monitor section
(II) RADEONHD(1): Output TV_7PIN_DIN has no monitor section
(II) RADEONHD(1): Output DVI-I_2/digital has no monitor section
(II) RADEONHD(1): Output DVI-I_2/analog has no monitor section
(II) RADEONHD(1): Output DVI-I_1/digital disconnected
(II) RADEONHD(1): Output DVI-I_1/analog disconnected
(II) RADEONHD(1): Output TV_7PIN_DIN disconnected
(II) RADEONHD(1): Output DVI-I_2/digital disconnected
(II) RADEONHD(1): Output DVI-I_2/analog disconnected
(WW) RADEONHD(1): No outputs definitely connected, trying again...
(II) RADEONHD(1): Output DVI-I_1/digital disconnected
(II) RADEONHD(1): Output DVI-I_1/analog disconnected
(II) RADEONHD(1): Output TV_7PIN_DIN disconnected
(II) RADEONHD(1): Output DVI-I_2/digital disconnected
(II) RADEONHD(1): Output DVI-I_2/analog disconnected
(WW) RADEONHD(1): Unable to find initial modes
(EE) RADEONHD(1): RandR: No valid modes. Disabling RandR support.
(EE) RADEONHD(1): Failed to detect a connected monitor
(II) RADEONHD(1): Destroying TMDS A
(II) RADEONHD(1): Destroying DAC B
(II) RADEONHD(1): Destroying TMDS B
(II) RADEONHD(1): Destroying DAC A
(II) RADEONHD(1): I2C bus "RHD I2C line 0" removed.
(II) RADEONHD(1): I2C bus "RHD I2C line 1" removed.
(II) RADEONHD(1): I2C bus "RHD I2C line 2" removed.
(II) RADEONHD(1): I2C bus "RHD I2C line 3" removed.
(II) UnloadModule: "radeonhd"
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) RADEONHD(0): Mapped IO @ 0xf7000000 to 0x7f39ca36f000 (size 0x00010000)
(II) RADEONHD(0): Mapped FB @ 0xd0000000 to 0x7f39b66f6000 (size 0x10000000)
(WW) RADEONHD(0): RHDCSInit: No CS for R600 and up yet.
(==) RADEONHD(0): Backing store disabled
(==) RADEONHD(0): Silken mouse enabled
(II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) RADEONHD(0): On Crtc 0 Setting 59.9 Hz Mode: Modeline "1920x1080" 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync +vsync
None
(II) RADEONHD(0): RHDAudioSetClock: using TMDS A as clock source with 138500 khz
(II) RADEONHD(0): Using ACR timing N=4096 CTS=138500 for frequency 32000
(II) RADEONHD(0): Using ACR timing N=6272 CTS=153888 for frequency 44100
(II) RADEONHD(0): Using ACR timing N=6144 CTS=138500 for frequency 48000
(II) RADEONHD(0): RHDAudioSetSupported: config 0x60040 codec 0x1
(II) RADEONHD(0): DPMS enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEONHD(0): Setting screen physical size to 510 x 290
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event5"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
(II) ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) ImPS/2 Logitech Wheel Mouse: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
Last edited by warnab (2009-10-21 18:53:12)

i'm getting then such log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux kasia 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 21 22:35:22 2009
(II) Loader magic: 0x1d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(!!) More than one possible primary device found
(--) PCI: (0:1:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xd0000000/268435456, 0xf7000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
(--) PCI: (0:2:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
Primary device is not PCI
(==) Using default built-in configuration (21 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default vesa Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(II) UnloadModule: "vesa"
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) No drivers available.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

Please help! Strange problem with HTTPD.Conf and OC4J (I think)

Hi,
We have been trying to configure the 10g "infrastructure" Apache server/instance to work with our own authentication module, and as part of this, we need to configure a directory alias containing some of our JSPs. To do this, the only thing that we did was that we took the standard HTTPD.CONF file that got installed with the 10g AS installation, and added a small section at the end.
However, we are finding that if our addition to the HTTPD.CONF is included, instead of the JSPs in our aliased directory being processed, Apache seems to be just serving the JSPs as text pages :(..
If we remove the section at the end of the HTTPD.CONF, and point a browser to the unaliased path, the JSPs get processed correctly.
I was wondering if anyone here might take a look at our HTTPD.CONF below, and tell me if you can see something there that might be causing this behavior? The section that we added is at the very end. We think that the problem might be something like the "order" of the directives, etc. in the HTTPD.CONF file may be such that the alias is taking priority ahead of the OC4J, or something like that.
Thanks in advance, and apologies for the long message.
Jim
=====================================================
ServerType standalone
ServerRoot "/orad59/10gAS/infrastructure/Apache/Apache"
PidFile /orad59/10gAS/infrastructure/Apache/Apache/logs/httpd.pid
ScoreBoardFile /orad59/10gAS/infrastructure/Apache/Apache/logs/httpd.scoreboard
Timeout 300
KeepAlive On
MaxKeepAliveRequests 100
KeepAliveTimeout 15
MinSpareServers 5
MaxSpareServers 20
StartServers 5
MaxClients 150
MaxRequestsPerChild 0
LoadModule onsint_module libexec/mod_onsint.so
LoadModule mmap_static_module libexec/mod_mmap_static.so
LoadModule vhost_alias_module libexec/mod_vhost_alias.so
LoadModule env_module libexec/mod_env.so
LoadModule define_module libexec/mod_define.so
LoadModule config_log_module libexec/mod_log_config.so
LoadModule agent_log_module libexec/mod_log_agent.so
LoadModule referer_log_module libexec/mod_log_referer.so
LoadModule mime_magic_module libexec/mod_mime_magic.so
LoadModule mime_module libexec/mod_mime.so
LoadModule negotiation_module libexec/mod_negotiation.so
LoadModule status_module libexec/mod_status.so
LoadModule info_module libexec/mod_info.so
LoadModule includes_module libexec/mod_include.so
LoadModule autoindex_module libexec/mod_autoindex.so
LoadModule dir_module libexec/mod_dir.so
LoadModule cgi_module libexec/mod_cgi.so
LoadModule asis_module libexec/mod_asis.so
LoadModule imap_module libexec/mod_imap.so
LoadModule action_module libexec/mod_actions.so
LoadModule speling_module libexec/mod_speling.so
LoadModule userdir_module libexec/mod_userdir.so
LoadModule alias_module libexec/mod_alias.so
LoadModule access_module libexec/mod_access.so
LoadModule auth_module libexec/mod_auth.so
LoadModule anon_auth_module libexec/mod_auth_anon.so
LoadModule dbm_auth_module libexec/mod_auth_dbm.so
LoadModule digest_module libexec/mod_digest.so
LoadModule proxy_module libexec/libproxy.so
LoadModule cern_meta_module libexec/mod_cern_meta.so
LoadModule expires_module libexec/mod_expires.so
LoadModule headers_module libexec/mod_headers.so
LoadModule usertrack_module libexec/mod_usertrack.so
LoadModule unique_id_module libexec/mod_unique_id.so
LoadModule setenvif_module libexec/mod_setenvif.so
LoadModule perl_module libexec/libperl.so
LoadModule fastcgi_module libexec/mod_fastcgi.so
<IfDefine SSL>
LoadModule ossl_module libexec/mod_ossl.so
</IfDefine>
LoadModule wchandshake_module libexec/mod_wchandshake.so
ExtendedStatus On
Port 7777
Listen 7777
User oracle
Group dba
ServerAdmin [email protected]
ServerName ge1ssd04.test.com
DocumentRoot "/orad59/10gAS/infrastructure/Apache/Apache/htdocs"
<Directory />
Options FollowSymLinks MultiViews
AllowOverride None
</Directory>
<Directory "/orad59/10gAS/infrastructure/Apache/Apache/htdocs">
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<IfModule mod_userdir.c>
UserDir public_html
</IfModule>
<IfModule mod_dir.c>
DirectoryIndex index.html
</IfModule>
AccessFileName .htaccess
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
UseCanonicalName On
<IfModule mod_mime.c>
TypesConfig /orad59/10gAS/infrastructure/Apache/Apache/conf/mime.types
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
AddLanguage ar .ar
AddLanguage da .dk .da
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fi .fi
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage es .es_ES .es
AddLanguage he .he .iw
AddLanguage hu .hu
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage ko .ko
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt_BR .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage sk .sk
AddLanguage sv .sv
AddLanguage th .th
AddLanguage tr .tr
AddLanguage cz .cz .cs
AddLanguage ro .ro
AddLanguage ru .ru
AddLanguage zh-cn .zh_CN
AddLanguage zh-tw .zh_TW
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
<IfModule mod_negotiation.c>
LanguagePriority ar en da nl et fi fr de el it ja ko kr no pl pt pt-br ro ru ltz ca es sk sv th tr zh-cn zh-tw zh-cn
</IfModule>
AddType application/x-tar .tgz
</IfModule>
DefaultType text/plain
<IfModule mod_mime_magic.c>
MIMEMagicFile /orad59/10gAS/infrastructure/Apache/Apache/conf/magic
</IfModule>
HostnameLookups Off
ErrorLog "|/orad59/10gAS/infrastructure/Apache/Apache/bin/rotatelogs /orad59/10gAS/infrastructure/Apache/Apache/logs/error_log 43200"
LogLevel warn
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
CustomLog "|/orad59/10gAS/infrastructure/Apache/Apache/bin/rotatelogs /orad59/10gAS/infrastructure/Apache/Apache/logs/access_log 43200" common
ServerSignature On
<IfModule mod_alias.c>
Alias /icons/ "/orad59/10gAS/infrastructure/Apache/Apache/icons/"
Alias /jservdocs/ "/orad59/10gAS/infrastructure/Apache/Jserv/docs/"
Alias /javacachedocs/ "/orad59/10gAS/infrastructure/javacache/javadoc/"
<IfModule mod_perl.c>
Alias /perl/ "/orad59/10gAS/infrastructure/Apache/Apache/cgi-bin/"
</IfModule>
<Directory "/orad59/10gAS/infrastructure/Apache/Apache/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
ScriptAlias /cgi-bin/ "/orad59/10gAS/infrastructure/Apache/Apache/cgi-bin/"
<Directory "/orad59/10gAS/infrastructure/Apache/Apache/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
<IfModule mod_autoindex.c>
IndexOptions FancyIndexing
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
ReadmeName README
HeaderName HEADER
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
<IfModule mod_setenvif.c>
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost ge1ssd04.test.com ge1ssd04
</Location>
SetEnv PERL5LIB "/orad59/10gAS/infrastructure/perl/lib/5.6.1:/orad59/10gAS/infrastructure/perl/lib/site_perl/5.6.1"
<IfModule mod_perl.c>
PerlModule Apache
PerlModule Apache::Registry
<Location /perl>
SetHandler perl-script
PerlHandler Apache::Registry
AddHandler perl-script .pl
Options +ExecCGI
PerlSendHeader On
</Location>
</IfModule>
<DirectoryMatch /WEB-INF/>
Order deny,allow
Deny from all
</DirectoryMatch>
<IfModule mod_fastcgi.c>
Alias /fastcgi/ "/orad59/10gAS/infrastructure/Apache/fastcgi/"
ScriptAlias /fcgi-bin/ "/orad59/10gAS/infrastructure/Apache/Apache/fcgi-bin/"
<Directory "/orad59/10gAS/infrastructure/Apache/Apache/fcgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
SetHandler fastcgi-script
<IfModule mod_ossl.c>
SSLOptions +StdEnvVars
</IfModule>
</Directory>
</IfModule>
PassEnv ORACLE_HOME
PassEnv LD_LIBRARY_PATH
PassEnv NLS_LANG
PassEnv TNS_ADMIN
<IfModule mod_oprocmgr.c>
<Location /oprocmgr-service>
SetHandler oprocmgr-service
Order deny,allow
Deny from all
Allow from localhost ge1ssd04.test.com ge1ssd04
</Location>
<Location /oprocmgr-status>
SetHandler oprocmgr-status
Order deny,allow
Deny from all
Allow from localhost ge1ssd04.test.com ge1ssd04
</Location>
</IfModule>
include "/orad59/10gAS/infrastructure/Apache/Apache/conf/mod_oc4j.conf"
include "/orad59/10gAS/infrastructure/Apache/Apache/conf/dms.conf"
LoadModule rewrite_module libexec/mod_rewrite.so
include "/orad59/10gAS/infrastructure/Apache/Apache/conf/ssl.conf"
include "/orad59/10gAS/infrastructure/Apache/Apache/conf/mod_osso.conf"
include "/orad59/10gAS/infrastructure/Apache/Apache/conf/oracle_apache.conf"
# MY ADDITIONS TO HTTPD.CONF GO BELOW HERE....
LoadModule my_auth_module /opt/myagent/apache/lib/libmy_apache_agent_mod_ssl.so
AddModule my_apache_mod.c
<IfModule my_apache_mod.c>
MYAgentRoot /opt/myagent/apache
</IfModule>
<IfModule my_apache_mod.c>
<Location />
AuthType Basic
Require valid-user
AuthName MYAUTH
</Location>
</IfModule>
<IfModule my_apache_mod.c>
Alias /mydir/ "/orad59/10gAS/infrastructure/j2ee/OC4J_SECURITY/applications/sso/web/jsp/myagentdir/"
<Directory "/orad59/10gAS/infrastructure/j2ee/OC4J_SECURITY/applications/sso/web/jsp/myagentdir/">
AuthType Basic
Require valid-user
AuthName MYAUTH
</Directory>
</IfModule>

Hi,
I wanted to post what we found on this.
As indicated in my original msg, we had an Alias directory in the httpd.conf. However, after thinking about the problem a bit, I think that the Alias was not the right thing to do.
The Alias tells Apache to map a URL fragment to a FILESYSTEM location. Well, obviously, Apache only SERVES pages... it doesn't process JSPs.
We switched to using a Redirect directive instead of the Alias, and things worked a little better, but we've run into a bit of a problem with "Redirect looping", but that's a different story :)...
Jim

Help with ati open-source driver :what problems with my xorg.conf?

I removed vesa driver and then :
sudo pacman -S xf86-video-ati libgl
I have browser http://wiki.archlinux.org/index.php/ATI
I add me to the group video,add radeon to my rc.conf.
and changed my xorg.conf like that.and then I type "startx",It did work,but the resolution is not right (it should be 1027x768 but I got a resolution 640x480),and I run glxinfo it said :"unable to open display"
I'm sure the HorizSync VertRefresh is right besause when I try catalyst it works well :<
my card is ati X550
Here's my config:(can anyone who's ati card work with open-source driver works well give me your xorg.conf ?THX!)
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "radeon"
Load "glx"
Load "record"
Load "extmod"
Load "xtrap"
Load "GLcore"
Load "dbe"
Load "dri"
Load "drm"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 320 240 # mm
Identifier "Monitor0"
VendorName "KTC"
ModelName "1700"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 28.0 - 80.0
VertRefresh 50.0 - 200.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RV370 [Sapphire X550 Silent]"
Option "XAANoOffscreenPixmaps" "true"
Option "AGPMode" "4"
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
Option "EnablePageFlip" "on"
Option "AGPFastWrite" "true"
BusID "PCI:1:0:0"
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection

Ok, seems like you don't use [testing] because in this case x wouldn't even start, because RgbPath in the Section "Files" doesn't exist anymore and has to be removed.
I do always recommend people to disable any kind of options in the Section "Device", if there are problems with the video card. You usually do not have to put radeon neigher into the Section "Module", nor into rc.conf! So remove them, radeon should be loaded because it's set as Driver in the Section "Device"
Your problem with wrong resolution ... I'm not an expert in this, didn't ever have such a problem, but are you sure, that your HorizSync and VertRefresh values are right?

ITunes cannot run because it has detected a problem with your audio conf

Yesterday iTunes worked, today it does not. Now every time I try to start iTunes I get the following error:
"iTunes cannot run because it has detected a problem with your audio configuration"
I have not made any changes or installed any new applications.
I reinstalled iTunes and still get the same error.
Windows media player works fine. I am running XP/
Help, Please
powerspec Windows XP

I had that SAME problem and didn't change anything either.
I have XP sp2. The only change that may have been made was an automatic software update because I added Apple as a trusted source.
I uninstalled iTunes and reinstalled it and now a large portion of my songs do not work. It is a random selection of them, by various songs and artists.
What does seem strange is they all have a the same last modified date. I went through my iTunes and deselected every song that doesn't work and then sorted by date.
See the screen caps here:
http://justanotherfangirl.com/ituneserror1.jpg
http://justanotherfangirl.com/ituneserror2.jpg
http://justanotherfangirl.com/ituneserror3.jpg
They all have the same date. A system restore to a previous date doesn't solve the problem.
Does anyone know if this is solvable. I refuse to lose 40 bucks worth of songs.

Some problems with 3D with xorg 1.9.2-1 and xf86-video-intel 2.12.0-3

I have some problems with the upgrade to xorg 1.9.1-1 and xf86-video-intel 2.12.0-3. Glxgears does not run smoothly at all and I got 15-20 fps (instead of the normal 60 because intel should sync with the V refresh rate). Very curiously, these problems disapear if I move the mouse cursor somewhere in the screen. Then glxgears run smooth and I have indeed the expected 60 fps
There are no error messages and glxinfo say that 3D is indeed enabled.
Xorg log file:
[ 358.899] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
[ 358.899] _XSERVTransOpen: transport open failed for inet6/myhost:0
[ 358.899] _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
[ 358.900]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 358.900] X Protocol Version 11, Revision 0
[ 358.900] Build Operating System: Linux 2.6.35-ARCH i686
[ 358.900] Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Sat Oct 30 19:57:05 UTC 2010 i686
[ 358.900] Kernel command line: root=/dev/disk/by-uuid/e5c72fc3-4e8b-4f5d-9023-12216af63d84 resume=/dev/disk/by-uuid/96f14b75-fb64-4881-863d-124af7c13e2f ro
[ 358.900] Build Date: 01 November 2010 10:23:07PM
[ 358.900]
[ 358.900] Current version of pixman: 0.18.4
[ 358.900] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 358.900] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 358.900] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 9 10:14:10 2010
[ 358.900] (==) Using config file: "/etc/X11/xorg.conf"
[ 358.901] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 358.901] (==) ServerLayout "X.org Configured"
[ 358.901] (**) |-->Screen "Screen0" (0)
[ 358.901] (**) | |-->Monitor "Monitor0"
[ 358.901] (**) | |-->Device "Card0"
[ 358.901] (**) |-->Input Device "Mouse0"
[ 358.901] (**) |-->Input Device "touchpad"
[ 358.901] (**) |-->Input Device "Keyboard0"
[ 358.901] (**) Option "DontZap" "off"
[ 358.901] (**) Option "StandbyTime" "5"
[ 358.901] (**) Option "SuspendTime" "5"
[ 358.901] (**) Option "OffTime" "5"
[ 358.901] (**) Option "Xinerama" "on"
[ 358.901] (**) Option "AutoAddDevices" "off"
[ 358.901] (**) Not automatically adding devices
[ 358.901] (==) Automatically enabling devices
[ 358.902] (**) Xinerama: enabled
[ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 358.902] Entry deleted from font path.
[ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 358.902] Entry deleted from font path.
[ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 358.902] Entry deleted from font path.
[ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 358.902] Entry deleted from font path.
[ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 358.902] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/
[ 358.902] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 358.902] (II) Loader magic: 0x81f1f80
[ 358.902] (II) Module ABI versions:
[ 358.902] X.Org ANSI C Emulation: 0.4
[ 358.902] X.Org Video Driver: 8.0
[ 358.902] X.Org XInput driver : 11.0
[ 358.902] X.Org Server Extension : 4.0
[ 358.903] (--) PCI:*(0:0:2:0) 8086:27a2:1584:9916 rev 3, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0040000/262144, I/O @ 0x00001800/8
[ 358.903] (--) PCI: (0:0:2:1) 8086:27a6:1584:9916 rev 3, Mem @ 0xb0100000/524288
[ 358.904] (II) Open ACPI successful (/var/run/acpid.socket)
[ 358.904] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) LoadModule: "extmod"
[ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 358.904] (II) Module extmod: vendor="X.Org Foundation"
[ 358.904] compiled for 1.9.2, module version = 1.0.0
[ 358.904] Module class: X.Org Server Extension
[ 358.904] ABI class: X.Org Server Extension, version 4.0
[ 358.904] (II) Loading extension MIT-SCREEN-SAVER
[ 358.904] (II) Loading extension XFree86-VidModeExtension
[ 358.904] (II) Loading extension XFree86-DGA
[ 358.904] (II) Loading extension DPMS
[ 358.904] (II) Loading extension XVideo
[ 358.904] (II) Loading extension XVideo-MotionCompensation
[ 358.904] (II) Loading extension X-Resource
[ 358.904] (II) LoadModule: "glx"
[ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 358.905] (II) Module glx: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.0.0
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (==) AIGLX enabled
[ 358.905] (II) Loading extension GLX
[ 358.905] (II) LoadModule: "record"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 358.905] (II) Module record: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.13.0
[ 358.905] Module class: X.Org Server Extension
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (II) Loading extension RECORD
[ 358.905] (II) LoadModule: "dri2"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 358.905] (II) Module dri2: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.2.0
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (II) Loading extension DRI2
[ 358.905] (II) LoadModule: "dbe"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 358.906] (II) Module dbe: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.2, module version = 1.0.0
[ 358.906] Module class: X.Org Server Extension
[ 358.906] ABI class: X.Org Server Extension, version 4.0
[ 358.906] (II) Loading extension DOUBLE-BUFFER
[ 358.906] (II) LoadModule: "dri"
[ 358.906] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 358.906] (II) Module dri: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.2, module version = 1.0.0
[ 358.906] ABI class: X.Org Server Extension, version 4.0
[ 358.906] (II) Loading extension XFree86-DRI
[ 358.906] (II) LoadModule: "synaptics"
[ 358.906] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 358.906] (II) Module synaptics: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.0, module version = 1.3.0
[ 358.906] Module class: X.Org XInput Driver
[ 358.906] ABI class: X.Org XInput driver, version 11.0
[ 358.906] (II) LoadModule: "intel"
[ 358.906] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 358.907] (II) Module intel: vendor="X.Org Foundation"
[ 358.907] compiled for 1.9.0, module version = 2.12.0
[ 358.907] Module class: X.Org Video Driver
[ 358.907] ABI class: X.Org Video Driver, version 8.0
[ 358.907] (II) LoadModule: "mouse"
[ 358.907] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 358.907] (II) Module mouse: vendor="X.Org Foundation"
[ 358.907] compiled for 1.9.0, module version = 1.6.0
[ 358.907] Module class: X.Org XInput Driver
[ 358.907] ABI class: X.Org XInput driver, version 11.0
[ 358.907] (II) LoadModule: "synaptics"
[ 358.907] (II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 358.907] (II) LoadModule: "kbd"
[ 358.908] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[ 358.908] (II) Module kbd: vendor="X.Org Foundation"
[ 358.908] compiled for 1.9.0, module version = 1.4.0
[ 358.908] Module class: X.Org XInput Driver
[ 358.908] ABI class: X.Org XInput driver, version 11.0
[ 358.908] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 358.908] (--) using VT number 7
[ 358.908] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 358.908] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 358.916] drmOpenDevice: node name is /dev/dri/card0
[ 358.916] drmOpenDevice: open result is 10, (OK)
[ 358.916] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 358.916] drmOpenDevice: node name is /dev/dri/card0
[ 358.916] drmOpenDevice: open result is 10, (OK)
[ 358.916] drmOpenByBusid: drmOpenMinor returns 10
[ 358.916] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 358.916] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 358.916] (==) intel(0): RGB weight 888
[ 358.916] (==) intel(0): Default visual is TrueColor
[ 358.916] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[ 358.916] (--) intel(0): Chipset: "945GM"
[ 358.916] (==) intel(0): video overlay key set to 0x101fe
[ 358.953] (II) intel(0): Output VGA1 using monitor section vgamonitor
[ 358.953] (**) intel(0): Option "Disable" "true"
[ 359.059] (II) intel(0): Output LVDS1 using monitor section lvdsmonitor
[ 359.059] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 359.340] (II) intel(0): Output TV1 has no monitor section
[ 359.380] (II) intel(0): EDID for output VGA1
[ 359.486] (II) intel(0): EDID for output LVDS1
[ 359.486] (II) intel(0): Manufacturer: CPT Model: 13a6 Serial#: 0
[ 359.486] (II) intel(0): Year: 2006 Week: 17
[ 359.486] (II) intel(0): EDID Version: 1.3
[ 359.486] (II) intel(0): Digital Display Input
[ 359.486] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 359.486] (II) intel(0): Gamma: 2.20
[ 359.486] (II) intel(0): No DPMS capabilities specified
[ 359.486] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 359.486] (II) intel(0): First detailed timing is preferred mode
[ 359.486] (II) intel(0): redX: 0.600 redY: 0.340 greenX: 0.309 greenY: 0.559
[ 359.486] (II) intel(0): blueX: 0.149 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
[ 359.486] (II) intel(0): Manufacturer's mask: 0
[ 359.486] (II) intel(0): Supported detailed timing:
[ 359.486] (II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
[ 359.486] (II) intel(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
[ 359.486] (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
[ 359.486] (II) intel(0): Unknown vendor-specific block f
[ 359.486] (II) intel(0): FD1631154WB4
[ 359.486] (II) intel(0): /BRZÄêÿ
[ 359.486] (II) intel(0): EDID (in hex):
[ 359.486] (II) intel(0): 00ffffffffffff000e14a61300000000
[ 359.486] (II) intel(0): 11100103802115780a806d99574f8f26
[ 359.486] (II) intel(0): 21505400000001010101010101010101
[ 359.486] (II) intel(0): 010101010101ea1a0080502010301520
[ 359.486] (II) intel(0): 13004bcf100000190000000f00000000
[ 359.486] (II) intel(0): 0000000000206e050f00000000fe0046
[ 359.486] (II) intel(0): 44313633313135345742340a000000fe
[ 359.486] (II) intel(0): 002f42525a81c4eaff01010a2020004f
[ 359.487] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 359.487] (II) intel(0): Printing probed modes for output LVDS1
[ 359.487] (II) intel(0): Modeline "1280x800"x60.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
[ 359.487] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 359.487] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 359.487] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 359.487] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 359.766] (II) intel(0): EDID for output TV1
[ 359.766] (II) intel(0): Output VGA1 disabled by config file
[ 359.766] (II) intel(0): Output LVDS1 connected
[ 359.766] (II) intel(0): Output TV1 disconnected
[ 359.766] (II) intel(0): Using exact sizes for initial modes
[ 359.766] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 359.766] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 359.766] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
[ 359.766] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
[ 359.766] (==) intel(0): DPI set to (96, 96)
[ 359.767] (II) Loading sub module "fb"
[ 359.767] (II) LoadModule: "fb"
[ 359.767] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 359.767] (II) Module fb: vendor="X.Org Foundation"
[ 359.767] compiled for 1.9.2, module version = 1.0.0
[ 359.767] ABI class: X.Org ANSI C Emulation, version 0.4
[ 359.767] (==) Depth 24 pixmap format is 32 bpp
[ 359.767] (II) intel(0): [DRI2] Setup complete
[ 359.767] (II) intel(0): [DRI2] DRI driver: i915
[ 359.767] (**) intel(0): Tiling enabled
[ 359.767] (**) intel(0): SwapBuffers wait enabled
[ 359.767] (==) intel(0): VideoRam: 262144 KB
[ 359.767] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[ 359.767] (II) UXA(0): Driver registered support for the following operations:
[ 359.767] (II) solid
[ 359.767] (II) copy
[ 359.767] (II) composite (RENDER acceleration)
[ 359.767] (II) put_image
[ 359.767] (II) get_image
[ 359.767] (==) intel(0): Backing store disabled
[ 359.767] (==) intel(0): Silken mouse enabled
[ 359.767] (II) intel(0): Initializing HW Cursor
[ 359.803] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 359.804] (==) intel(0): DPMS enabled
[ 359.805] (==) intel(0): Intel XvMC decoder disabled
[ 359.805] (II) intel(0): Set up textured video
[ 359.805] (II) intel(0): Set up overlay video
[ 359.805] (II) intel(0): direct rendering: DRI2 Enabled
[ 359.805] (--) RandR disabled
[ 359.805] (II) Initializing built-in extension Generic Event Extension
[ 359.805] (II) Initializing built-in extension SHAPE
[ 359.805] (II) Initializing built-in extension MIT-SHM
[ 359.805] (II) Initializing built-in extension XInputExtension
[ 359.805] (II) Initializing built-in extension XTEST
[ 359.805] (II) Initializing built-in extension BIG-REQUESTS
[ 359.805] (II) Initializing built-in extension SYNC
[ 359.805] (II) Initializing built-in extension XKEYBOARD
[ 359.805] (II) Initializing built-in extension XC-MISC
[ 359.805] (II) Initializing built-in extension SECURITY
[ 359.805] (II) Initializing built-in extension XINERAMA
[ 359.805] (II) Initializing built-in extension XFIXES
[ 359.805] (II) Initializing built-in extension RENDER
[ 359.805] (II) Initializing built-in extension RANDR
[ 359.805] (II) Initializing built-in extension COMPOSITE
[ 359.805] (II) Initializing built-in extension DAMAGE
[ 359.821] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 359.821] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 359.821] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 359.821] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 359.821] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 359.821] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[ 359.821] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 359.822] (II) intel(0): Setting screen physical size to 338 x 211
[ 360.019] (**) Option "Protocol" "auto"
[ 360.019] (**) Option "Device" "/dev/input/mice"
[ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 360.019] (**) Mouse0: Device: "/dev/input/mice"
[ 360.019] (**) Mouse0: Protocol: "auto"
[ 360.019] (**) Option "CorePointer"
[ 360.019] (**) Mouse0: always reports core events
[ 360.019] (**) Option "Device" "/dev/input/mice"
[ 360.019] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[ 360.019] (**) Option "ZAxisMapping" "4 5 6 7"
[ 360.019] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
[ 360.019] (**) Mouse0: Buttons: 11
[ 360.019] (**) Option "Sensitivity" "0.7"
[ 360.019] (**) Mouse0: Sensitivity: 0.7
[ 360.019] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
[ 360.019] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 360.019] (**) Mouse0: (accel) acceleration profile 0
[ 360.019] (**) Mouse0: (accel) acceleration factor: 2.000
[ 360.019] (**) Mouse0: (accel) acceleration threshold: 4
[ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 360.311] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 360.311] (II) Synaptics touchpad driver version 1.3.0
[ 360.312] (--) touchpad auto-dev sets device to /dev/input/event6
[ 360.312] (**) Option "Device" "/dev/input/event6"
[ 360.312] (--) touchpad: x-axis range 1472 - 5472
[ 360.312] (--) touchpad: y-axis range 1408 - 4448
[ 360.312] (--) touchpad: pressure range 0 - 255
[ 360.312] (--) touchpad: finger width range 0 - 0
[ 360.312] (--) touchpad: buttons: left right double triple
[ 360.312] (--) touchpad: invalid finger width range. defaulting to 0 - 16
[ 360.312] (**) Option "TapButton1" "1"
[ 360.312] (--) touchpad: touchpad found
[ 360.312] (**) Option "SendCoreEvents"
[ 360.312] (**) touchpad: always reports core events
[ 360.312] (II) XINPUT: Adding extended input device "touchpad" (type: TOUCHPAD)
[ 360.312] (**) touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 360.312] (**) touchpad: MaxSpeed is now 1.75
[ 360.312] (**) touchpad: AccelFactor is now 0.040
[ 360.312] (**) touchpad: (accel) keeping acceleration scheme 1
[ 360.312] (**) touchpad: (accel) acceleration profile 1
[ 360.312] (**) touchpad: (accel) acceleration factor: 2.000
[ 360.312] (**) touchpad: (accel) acceleration threshold: 4
[ 360.312] (--) touchpad: touchpad found
[ 360.312] (**) Option "CoreKeyboard"
[ 360.312] (**) Keyboard0: always reports core events
[ 360.312] (**) Option "Protocol" "standard"
[ 360.312] (**) Keyboard0: Protocol: standard
[ 360.312] (**) Option "XkbRules" "base"
[ 360.312] (**) Keyboard0: XkbRules: "base"
[ 360.312] (**) Option "XkbModel" "pc105"
[ 360.312] (**) Keyboard0: XkbModel: "pc105"
[ 360.312] (**) Option "XkbLayout" "fr"
[ 360.313] (**) Keyboard0: XkbLayout: "fr"
[ 360.313] (**) Option "XkbVariant" "oss"
[ 360.313] (**) Keyboard0: XkbVariant: "oss"
[ 360.313] (**) Option "XkbOptions" "terminate:ctrl_alt_bksp"
[ 360.313] (**) Keyboard0: XkbOptions: "terminate:ctrl_alt_bksp"
[ 360.313] (**) Option "CustomKeycodes" "off"
[ 360.313] (**) Keyboard0: CustomKeycodes disabled
[ 360.313] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
[ 360.372] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 360.372] (II) AutoAddDevices is off - not adding device.
[ 360.373] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 360.373] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.377] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 360.377] (II) AutoAddDevices is off - not adding device.
[ 360.379] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/event9)
[ 360.379] (II) AutoAddDevices is off - not adding device.
[ 360.380] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/mouse1)
[ 360.380] (II) AutoAddDevices is off - not adding device.
[ 360.382] (II) config/udev: Adding input device Western Digital External HDD (/dev/input/event8)
[ 360.382] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 362.484] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 368.334] (II) Open ACPI successful (/var/run/acpid.socket)
[ 368.334] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 368.503] (II) intel(0): EDID vendor "CPT", prod id 5030
[ 368.503] (II) intel(0): Printing DDC gathered Modelines:
[ 368.503] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
[ 369.076] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 369.076] (--) touchpad: touchpad found
[ 441.972] (II) 3rd Button detected: disabling emulate3Button
output of glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_INTEL_swap_event
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
GLX version: 1.4
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 945GM GEM 20100328 2010Q1 x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 7.8.3
OpenGL extensions:
GL_ARB_copy_buffer, GL_ARB_depth_texture, GL_ARB_draw_buffers,
GL_ARB_draw_elements_base_vertex, GL_ARB_fragment_program,
GL_ARB_half_float_pixel, GL_ARB_map_buffer_range, GL_ARB_multisample,
GL_ARB_multitexture, GL_ARB_pixel_buffer_object, GL_ARB_point_parameters,
GL_ARB_point_sprite, GL_ARB_provoking_vertex, GL_ARB_shader_objects,
GL_ARB_shading_language_100, GL_ARB_shading_language_120, GL_ARB_shadow,
GL_ARB_sync, GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_vertex_array_object,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array, GL_EXT_copy_texture,
GL_EXT_draw_range_elements, GL_EXT_framebuffer_blit,
GL_EXT_framebuffer_object, GL_EXT_fog_coord,
GL_EXT_gpu_program_parameters, GL_EXT_multi_draw_arrays,
GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels,
GL_EXT_pixel_buffer_object, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_provoking_vertex, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap,
GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle,
GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1,
GL_APPLE_client_storage, GL_APPLE_packed_pixels,
GL_APPLE_vertex_array_object, GL_APPLE_object_purgeable,
GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3,
GL_ATI_separate_stencil, GL_IBM_multimode_draw_arrays,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
GL_NV_packed_depth_stencil, GL_NV_texture_env_combine4,
GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program,
GL_NV_vertex_program1_1, GL_OES_read_format, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
32 GLX Visuals
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8e 24 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x8f 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x90 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x91 24 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x92 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x93 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x94 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x95 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x96 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x97 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x98 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x99 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x9a 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x9b 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x9c 24 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9d 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9e 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9f 24 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa0 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa1 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa2 24 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa3 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa4 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa5 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa6 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa7 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa8 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0xa9 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xaa 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x5d 32 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
48 GLXFBConfigs:
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x5e 0 tc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x5f 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x60 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x61 0 tc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x62 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x63 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x64 0 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x65 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x66 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x67 0 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x68 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x69 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x6a 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6b 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6c 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6d 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6e 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6f 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x70 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x71 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x72 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x73 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x74 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x75 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x76 0 dc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x77 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x78 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x79 0 dc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7a 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7b 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7c 0 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7d 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7e 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7f 0 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x80 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x81 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x82 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x83 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x84 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x85 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x86 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x87 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x88 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x89 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x8a 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x8b 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x8c 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8d 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow

Gusar wrote:
*sigh*
Do you have problems with anything that's *not* glxgears?
I have indeed not seen other problems. Presently the only other software that I believe use openGL that I use is googleearth; which run fine. Could it be a problem with glxgears?

I have a problem with JDBC Realm in Tomcat/Oracle/Win XP

I have a problem with JDBC Realm in Tomcat.
I have attached my server.xml file located in the
C:\Program Files\Apache Software Foundation\Tomcat 5.5\conf\server.xml
The Problem is that when I login I get the user name and password prompt but it does not resolve.
When I enter in the tomcat-users.xml password with memory realm uncommented it works fine.
C:\Program Files\Apache Software Foundation\Tomcat 5.5\conf\tomcat-users.xml
Is there a cache or something I need to reset for the JDBC Realm to work?
I have attached my tables and contents as well...
Did I miss something????
Thanks
Phil
server.xml
<Server port="8005" shutdown="SHUTDOWN">
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
<Listener className="org.apache.catalina.storeconfig.StoreConfigLifecycleListener"/>

<GlobalNamingResources>

<Environment name="simpleValue" type="java.lang.Integer" value="30"/>
</GlobalNamingResources>

<Service name="Catalina">

<Connector
port="8080" maxHttpHeaderSize="8192"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true" />

<Connector port="8009"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />

<Engine name="Catalina" defaultHost="localhost">

<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@localhost:1521:orcl"
connectionName="testName" connectionPassword="testPass"
userTable="users"
userNameCol="user_name"
userCredCol="user_pass"
userRoleTable="user_roles"
roleNameCol="role_name" />

<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
</Host>
</Engine>
</Service>
</Server>
Tables
create table users
user_name varchar(15) not null primary key,
user_pass varchar(15) not null
create table roles
role_name varchar(15) not null primary key
create table user_roles
user_name varchar(15) not null,
role_name varchar(15) not null,
primary key( user_name, role_name )
select * from users;
----------------------+
| user_name | user_pass |
----------------------+
| tomcat | tomcat |
| user1 | tomcat |
| user2 | tomcat |
| user3 | tomcat |
----------------------+
select * from roles;
| role_name |
| tomcat |
| role1 |
select * from user_roles;
-----------------------+
| role_name | user_name |
-----------------------+
| tomcat | user1 |
| role1 | user2 |
| tomcat | tomcat |
| role1 | tomcat |
-----------------------+

Jan 2, 2008 11:49:35 AM org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-8080
Jan 2, 2008 11:49:35 AM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 734 ms
Jan 2, 2008 11:49:35 AM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
Jan 2, 2008 11:49:35 AM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.9
Jan 2, 2008 11:49:35 AM org.apache.catalina.realm.JDBCRealm start
SEVERE: Exception opening database connection
java.sql.SQLException: oracle.jdbc.driver.OracleDriver
     at org.apache.catalina.realm.JDBCRealm.open(JDBCRealm.java:684)
     at org.apache.catalina.realm.JDBCRealm.start(JDBCRealm.java:758)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1004)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
     at org.apache.catalina.core.StandardService.start(StandardService.java:450)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:683)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:537)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:271)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:409)
Jan 2, 2008 11:49:35 AM org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
Jan 2, 2008 11:49:36 AM org.apache.catalina.core.StandardContext resourcesStart

Problems with Steam - Dota2 and ETS2

Hello
I had never problems with Arch + xfce but last time I made fresh install of Arch with KDE and problems begins. Strange logs in steam running Dota 2 and Euro Truck Simulator 2. Dota 2 freezing, jumping even 60+ fps, both games can freeze for 1 min with sound.
Lenovo Y580 - GTX660M
After running Dota 2 with launch options (optirun -b primus %command% -console) output from console:
Game update: AppID 570 "Dota 2", ProcID 1441, IP 0.0.0.0:0
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
pid 1455 != 1454, skipping destruction (fork without exec?)
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_64/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS64): ignored.
Installing breakpad exception handler for appid(gameoverlayui)/version(20140715181500_client)
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
[0725/222647:ERROR:object_proxy.cc(239)] Failed to call method: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files
[0725/222647:WARNING:proxy_service.cc(958)] PAC support disabled because there is no system implementation
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Using breakpad crash handler
Setting breakpad minidump AppID = 570
Forcing breakpad minidump interfaces to load
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
Steam_SetMinidumpSteamID: Caching Steam ID: 76561198074650116 [API loaded yes]
Steam_SetMinidumpSteamID: Setting Steam ID: 76561198074650116
SDL video target is 'x11'
SDL failed to create GL compatibility profile (whichProfile=0!
This system supports the OpenGL extension GL_EXT_framebuffer_object.
This system supports the OpenGL extension GL_EXT_framebuffer_blit.
This system supports the OpenGL extension GL_EXT_framebuffer_multisample.
This system DOES NOT support the OpenGL extension GL_APPLE_fence.
This system supports the OpenGL extension GL_NV_fence.
This system supports the OpenGL extension GL_ARB_sync.
This system supports the OpenGL extension GL_EXT_draw_buffers2.
This system supports the OpenGL extension GL_EXT_bindable_uniform.
This system DOES NOT support the OpenGL extension GL_APPLE_flush_buffer_range.
This system supports the OpenGL extension GL_ARB_map_buffer_range.
This system supports the OpenGL extension GL_ARB_vertex_buffer_object.
This system supports the OpenGL extension GL_ARB_occlusion_query.
This system DOES NOT support the OpenGL extension GL_APPLE_texture_range.
This system DOES NOT support the OpenGL extension GL_APPLE_client_storage.
This system DOES NOT support the OpenGL extension GL_ARB_uniform_buffer.
This system supports the OpenGL extension GL_ARB_vertex_array_bgra.
This system supports the OpenGL extension GL_EXT_vertex_array_bgra.
This system supports the OpenGL extension GL_ARB_framebuffer_object.
This system DOES NOT support the OpenGL extension GL_GREMEDY_string_marker.
This system supports the OpenGL extension GL_ARB_debug_output.
This system supports the OpenGL extension GL_EXT_direct_state_access.
This system supports the OpenGL extension GL_NV_bindless_texture.
This system DOES NOT support the OpenGL extension GL_AMD_pinned_memory.
This system supports the OpenGL extension GL_EXT_framebuffer_multisample_blit_scaled.
This system supports the OpenGL extension GL_EXT_texture_sRGB_decode.
This system supports the OpenGL extension GL_NVX_gpu_memory_info.
This system DOES NOT support the OpenGL extension GL_ATI_meminfo.
This system supports the OpenGL extension GL_EXT_texture_compression_s3tc.
This system supports the OpenGL extension GL_EXT_texture_compression_dxt1.
This system DOES NOT support the OpenGL extension GL_ANGLE_texture_compression_dxt3.
This system DOES NOT support the OpenGL extension GL_ANGLE_texture_compression_dxt5.
This system DOES NOT support the OpenGL extension GLX_EXT_swap_control_tear.
GL_NV_bindless_texture: DISABLED
GL_AMD_pinned_memory: DISABLED
GL_EXT_texture_sRGB_decode: AVAILABLE
GL_NVX_gpu_memory_info: AVAILABLE
GL_ATI_meminfo: UNAVAILABLE
GL_NVX_gpu_memory_info: Total Dedicated: 2097152, Total Avail: 2097152, Current Avail: 2076116
GL_MAX_SAMPLES_EXT: 32
Adding VPK file: /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/dota/sound_vo_english
Adding VPK file: /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/dota/pak01
Adding VPK file: /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/platform/pak01
Did not detect any valid joysticks.
WARNING: unable to link Test_StartScript and Test_StartScript because one or more is a ConCommand.
WARNING: unable to link Test_RandomChance and Test_RandomChance because one or more is a ConCommand.
WARNING: unable to link Test_LoopForNumSeconds and Test_LoopForNumSeconds because one or more is a ConCommand.
WARNING: unable to link Test_Loop and Test_Loop because one or more is a ConCommand.
WARNING: unable to link Test_LoopCount and Test_LoopCount because one or more is a ConCommand.
WARNING: unable to link Test_StartLoop and Test_StartLoop because one or more is a ConCommand.
WARNING: unable to link log_flags and log_flags because one or more is a ConCommand.
WARNING: unable to link log_color and log_color because one or more is a ConCommand.
WARNING: unable to link log_verbosity and log_verbosity because one or more is a ConCommand.
WARNING: unable to link log_level and log_level because one or more is a ConCommand.
WARNING: unable to link log_dumpchannels and log_dumpchannels because one or more is a ConCommand.
Load a scaleform font provider?
Creating D3D9 device with D3DCREATE_MULTITHREADED
IDirect3DDevice9::Create: BackBufWidth: 1366, BackBufHeight: 768, D3DFMT: 3, BackBufCount: 1, MultisampleType: 0, MultisampleQuality: 0
GL sampler object usage: DISABLED
##### swap interval = 0 swap limit = 1 #####
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
!! Controller config file passed by steamworks game 570 did not exist at /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/dota/cfg/controller.vdf
Installing breakpad exception handler for appid(steam)/version(1405474565_client)
[0725/222707:ERROR:object_proxy.cc(239)] Failed to call method: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files
[0725/222707:WARNING:proxy_service.cc(958)] PAC support disabled because there is no system implementation
Im not able to run ETS 2 it's going to change resolution to 1024x768 in whole desktop and then crash. (Launch option: optirun -b primus %command%) output:
Game update: AppID 227300 "Euro Truck Simulator 2", ProcID 1554, IP 0.0.0.0:0
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
Setting breakpad minidump AppID = 227300
Steam_SetMinidumpSteamID: Caching Steam ID: 76561198074650116 [API loaded no]
Registered appid 227300 to use native controller config at /home/akikyo/.local/share/Steam/SteamApps/common/Euro Truck Simulator 2/controller.vdf
X Error of failed request: GLXUnsupportedPrivateRequest
Major opcode of failed request: 155 (GLX)
Minor opcode of failed request: 16 (X_GLXVendorPrivate)
Serial number of failed request: 80
Current serial number in output stream: 82
Game removed: AppID 227300 "Euro Truck Simulator 2", ProcID 1567
sudo journalctl
Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508930] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508943] [WARN][XORG] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508969] [WARN][XORG] (WW) Unresolved symbol: fbGetGCPrivateKey
Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508984] [WARN][XORG] (WW) NVIDIA(0): Unable to get display device for DPI computation.
Jul 25 22:35:16 lenovo kernel: eurotrucks2[1567]: segfault at 17 ip 00007f40f1e30433 sp 00007fff05479db0 error 6 in steamclient.so[7f40f1b66000+f7b000]
Jul 25 22:35:16 lenovo kernel: [drm] Module unloaded
Jul 25 22:35:16 lenovo kernel: bbswitch: disabling discrete graphics
Jul 25 22:35:16 lenovo kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140214/nsarguments-95)
Jul 25 22:35:16 lenovo kernel: pci 0000:01:00.0: Refused to change power state, currently in D0
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838215] [ERROR][XORG] (EE) Server terminated successfully (0). Closing log file.
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838233] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838238] [ERROR][XORG] (EE) Backtrace:
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838242] [ERROR][XORG] (EE) 0: Xorg (xorg_backtrace+0x56) [0x58f186]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838245] [ERROR][XORG] (EE) 1: Xorg (0x400000+0x192fc9) [0x592fc9]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838249] [ERROR][XORG] (EE) 2: /usr/lib/libpthread.so.0 (0x7fd21c5c8000+0xf4b0) [0x7fd21c5d74b0]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838256] [ERROR][XORG] (EE) 3: /usr/lib/libc.so.6 (malloc_usable_size+0x25) [0x7fd21b290d25]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838272] [ERROR][XORG] (EE) 4: /usr/lib/nvidia/libGL.so.1 (0x7fd21818b000+0xb61d9) [0x7fd2182411d9]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838286] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838298] [ERROR][XORG] (EE) Segmentation fault at address 0x0
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838306] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838317] [ERROR][XORG] (EE) Caught signal 11 (Segmentation fault). Server aborting
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838320] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838323] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838329] [ERROR][XORG] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838334] [ERROR][XORG] (EE)
sudo nano /var/log/Xorg.8.log
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 887.399] X Protocol Version 11, Revision 0
[ 887.399] Build Operating System: Linux 3.15.1-1-ARCH x86_64
[ 887.399] Current Operating System: Linux lenovo 3.15.5-2-ARCH #1 SMP PREEMPT Fri Jul 11 07:56:02 CEST 2014 x86_64
[ 887.399] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=a89135f9-ef1e-4b90-a073-ee78d492b58a rw rcutree.rcu_idle_gp_delay=1 quiet
[ 887.399] Build Date: 27 June 2014 07:32:26PM
[ 887.399]
[ 887.399] Current version of pixman: 0.32.6
[ 887.399] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 887.399] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 887.399] (==) Log file: "/var/log/Xorg.8.log", Time: Fri Jul 25 22:35:11 2014
[ 887.400] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 887.400] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 887.400] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 887.400] (==) ServerLayout "Layout0"
[ 887.400] (==) No screen section available. Using defaults.
[ 887.400] (**) |-->Screen "Default Screen Section" (0)
[ 887.400] (**) | |-->Monitor "<default monitor>"
[ 887.400] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 887.400] (**) | |-->Device "DiscreteNvidia"
[ 887.400] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 887.400] (**) Option "AutoAddDevices" "false"
[ 887.400] (**) Option "AutoAddGPU" "false"
[ 887.400] (**) Not automatically adding devices
[ 887.400] (==) Automatically enabling devices
[ 887.400] (**) Not automatically adding GPU devices
[ 887.401] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 887.401] Entry deleted from font path.
[ 887.401] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 887.401] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 887.401] Entry deleted from font path.
[ 887.401] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 887.401] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 887.401] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 887.401] (==) |-->Input Device "<default pointer>"
[ 887.401] (==) |-->Input Device "<default keyboard>"
[ 887.401] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 887.401] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 887.401] (II) Loader magic: 0x811cc0
[ 887.401] (II) Module ABI versions:
[ 887.401] X.Org ANSI C Emulation: 0.4
[ 887.401] X.Org Video Driver: 15.0
[ 887.401] X.Org XInput driver : 20.0
[ 887.401] X.Org Server Extension : 8.0
[ 887.401] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 887.401] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 887.401] setversion 1.4 failed: Permission denied
[ 887.403] (--) PCI:*(0:1:0:0) 10de:0fd4:17aa:3977 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 887.403] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 887.403] Initializing built-in extension Generic Event Extension
[ 887.404] Initializing built-in extension SHAPE
[ 887.404] Initializing built-in extension MIT-SHM
[ 887.404] Initializing built-in extension XInputExtension
[ 887.404] Initializing built-in extension XTEST
[ 887.404] Initializing built-in extension BIG-REQUESTS
[ 887.404] Initializing built-in extension SYNC
[ 887.404] Initializing built-in extension XKEYBOARD
[ 887.404] Initializing built-in extension XC-MISC
[ 887.404] Initializing built-in extension SECURITY
[ 887.404] Initializing built-in extension XINERAMA
[ 887.404] Initializing built-in extension XFIXES
[ 887.404] Initializing built-in extension RENDER
[ 887.404] Initializing built-in extension RANDR
[ 887.404] Initializing built-in extension COMPOSITE
[ 887.404] Initializing built-in extension DAMAGE
[ 887.404] Initializing built-in extension MIT-SCREEN-SAVER
[ 887.404] Initializing built-in extension DOUBLE-BUFFER
[ 887.404] Initializing built-in extension RECORD
[ 887.404] Initializing built-in extension DPMS
[ 887.404] Initializing built-in extension Present
[ 887.404] Initializing built-in extension DRI3
[ 887.404] Initializing built-in extension X-Resource
[ 887.404] Initializing built-in extension XVideo
[ 887.404] Initializing built-in extension XVideo-MotionCompensation
[ 887.404] Initializing built-in extension XFree86-VidModeExtension
[ 887.404] Initializing built-in extension XFree86-DGA
[ 887.404] Initializing built-in extension XFree86-DRI
[ 887.404] Initializing built-in extension DRI2
[ 887.404] (II) "glx" will be loaded by default.
[ 887.404] (II) LoadModule: "dri2"
[ 887.404] (II) Module "dri2" already built-in
[ 887.404] (II) LoadModule: "glamoregl"
[ 887.404] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 887.454] (II) Module glamoregl: vendor="X.Org Foundation"
[ 887.454] compiled for 1.15.0, module version = 0.6.0
[ 887.454] ABI class: X.Org ANSI C Emulation, version 0.4
[ 887.454] (II) LoadModule: "glx"
[ 887.454] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 887.495] (II) Module glx: vendor="NVIDIA Corporation"
[ 887.495] compiled for 4.0.2, module version = 1.0.0
[ 887.495] Module class: X.Org Server Extension
[ 887.495] (II) NVIDIA GLX Module 340.24 Wed Jul 2 15:04:31 PDT 2014
[ 887.495] Loading extension GLX
[ 887.495] (II) LoadModule: "nvidia"
[ 887.495] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 887.500] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 887.500] compiled for 4.0.2, module version = 1.0.0
[ 887.500] Module class: X.Org Video Driver
[ 887.500] (II) LoadModule: "mouse"
[ 887.500] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 887.502] (II) Module mouse: vendor="X.Org Foundation"
[ 887.502] compiled for 1.15.0, module version = 1.9.0
[ 887.502] Module class: X.Org XInput Driver
[ 887.502] ABI class: X.Org XInput driver, version 20.0
[ 887.502] (II) LoadModule: "kbd"
[ 887.502] (WW) Warning, couldn't open module kbd
[ 887.502] (II) UnloadModule: "kbd"
[ 887.502] (II) Unloading kbd
[ 887.502] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 887.502] (II) NVIDIA dlloader X Driver 340.24 Wed Jul 2 14:42:23 PDT 2014
[ 887.502] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 887.502] (--) using VT number 1
[ 887.502] (II) Loading sub module "fb"
[ 887.502] (II) LoadModule: "fb"
[ 887.502] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 887.504] (II) Module fb: vendor="X.Org Foundation"
[ 887.504] compiled for 1.15.2, module version = 1.0.0
[ 887.504] ABI class: X.Org ANSI C Emulation, version 0.4
[ 887.504] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 887.504] (II) Loading sub module "wfb"
[ 887.504] (II) LoadModule: "wfb"
[ 887.504] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 887.506] (II) Module wfb: vendor="X.Org Foundation"
[ 887.506] compiled for 1.15.2, module version = 1.0.0
[ 887.506] ABI class: X.Org ANSI C Emulation, version 0.4
[ 887.506] (II) Loading sub module "ramdac"
[ 887.506] (II) LoadModule: "ramdac"
[ 887.506] (II) Module "ramdac" already built-in
[ 887.506] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 887.506] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 887.506] (==) NVIDIA(0): RGB weight 888
[ 887.506] (==) NVIDIA(0): Default visual is TrueColor
[ 887.506] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 887.506] (**) NVIDIA(0): Option "NoLogo" "true"
[ 887.506] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 887.507] (**) NVIDIA(0): Option "UseEDID" "false"
[ 887.507] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 887.507] (**) NVIDIA(0): Enabling 2D acceleration
[ 887.507] (**) NVIDIA(0): Ignoring EDIDs
[ 887.507] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 887.507] (**) NVIDIA(0): mode
[ 891.006] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 891.008] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 660M (GK107) at PCI:1:0:0 (GPU-0)
[ 891.008] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 891.008] (--) NVIDIA(0): VideoBIOS: 80.07.3c.00.16
[ 891.008] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 891.008] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 660M at PCI:1:0:0
[ 891.008] (--) NVIDIA(0): none
[ 891.008] (II) NVIDIA(0): Validated MetaModes:
[ 891.008] (II) NVIDIA(0): "NULL"
[ 891.008] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 891.008] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 891.008] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 891.008] (--) Depth 24 pixmap format is 32 bpp
[ 891.008] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 891.008] (II) NVIDIA: access.
[ 891.013] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 891.013] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 891.013] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 891.013] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 891.013] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 891.013] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 891.013] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 891.013] (II) NVIDIA(0): Config Options in the README.
[ 891.013] (II) NVIDIA(0): Setting mode "NULL"
[ 891.028] Loading extension NV-GLX
[ 891.035] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 891.035] (==) NVIDIA(0): Backing store enabled
[ 891.035] (==) NVIDIA(0): Silken mouse enabled
[ 891.035] (==) NVIDIA(0): DPMS enabled
[ 891.035] Loading extension NV-CONTROL
[ 891.036] (II) Loading sub module "dri2"
[ 891.036] (II) LoadModule: "dri2"
[ 891.036] (II) Module "dri2" already built-in
[ 891.036] (II) NVIDIA(0): [DRI2] Setup complete
[ 891.036] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 891.036] (--) RandR disabled
[ 891.044] (II) Initializing extension GLX
[ 891.100] (II) Using input driver 'mouse' for '<default pointer>'
[ 891.100] (**) Option "CorePointer" "on"
[ 891.100] (**) <default pointer>: always reports core events
[ 891.100] (WW) <default pointer>: No Device specified, looking for one...
[ 891.146] (II) <default pointer>: Setting Device option to "/dev/input/mice"
[ 891.146] (--) <default pointer>: Device: "/dev/input/mice"
[ 891.146] (==) <default pointer>: Protocol: "Auto"
[ 891.146] (**) <default pointer>: always reports core events
[ 891.146] (**) Option "Device" "/dev/input/mice"
[ 891.200] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[ 891.200] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[ 891.200] (**) <default pointer>: Buttons: 9
[ 891.200] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
[ 891.200] (**) <default pointer>: (accel) keeping acceleration scheme 1
[ 891.200] (**) <default pointer>: (accel) acceleration profile 0
[ 891.200] (**) <default pointer>: (accel) acceleration factor: 2.000
[ 891.200] (**) <default pointer>: (accel) acceleration threshold: 4
[ 891.200] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
[ 891.493] (II) <default pointer>: ps2EnableDataReporting: succeeded
[ 891.493] (II) LoadModule: "kbd"
[ 891.494] (WW) Warning, couldn't open module kbd
[ 891.494] (II) UnloadModule: "kbd"
[ 891.494] (II) Unloading kbd
[ 891.494] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 891.494] (EE) No input driver matching `kbd'
[ 891.497] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 891.497] (II) AutoAddDevices is off - not adding device.
[ 891.497] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 891.497] (II) AutoAddDevices is off - not adding device.
[ 891.497] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 891.497] (II) AutoAddDevices is off - not adding device.
[ 891.498] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 891.498] (II) AutoAddDevices is off - not adding device.
[ 891.498] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 891.498] (II) AutoAddDevices is off - not adding device.
[ 891.498] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 891.498] (II) AutoAddDevices is off - not adding device.
[ 891.499] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 891.499] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 891.499] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 891.499] setversion 1.4 failed: Permission denied
[ 891.499] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event7)
[ 891.499] (II) AutoAddDevices is off - not adding device.
[ 891.500] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 891.500] (II) AutoAddDevices is off - not adding device.
[ 891.500] (II) config/udev: Adding input device CHESEN USB Keyboard (/dev/input/event8)
[ 891.500] (II) AutoAddDevices is off - not adding device.
[ 891.501] (II) config/udev: Adding input device CHESEN USB Keyboard (/dev/input/event9)
[ 891.501] (II) AutoAddDevices is off - not adding device.
[ 891.501] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 891.501] (II) AutoAddDevices is off - not adding device.
[ 891.501] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[ 891.501] (II) AutoAddDevices is off - not adding device.
[ 891.502] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[ 891.502] (II) AutoAddDevices is off - not adding device.
[ 891.502] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event15)
[ 891.502] (II) AutoAddDevices is off - not adding device.
[ 891.502] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event16)
[ 891.502] (II) AutoAddDevices is off - not adding device.
[ 891.503] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event10)
[ 891.503] (II) AutoAddDevices is off - not adding device.
[ 891.503] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event6)
[ 891.503] (II) AutoAddDevices is off - not adding device.
[ 891.503] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event17)
[ 891.504] (II) AutoAddDevices is off - not adding device.
[ 891.504] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 891.504] (II) AutoAddDevices is off - not adding device.
[ 891.504] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[ 891.504] (II) AutoAddDevices is off - not adding device.
[ 892.695] (II) UnloadModule: "mouse"
[ 892.720] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 892.723] (EE) Server terminated successfully (0). Closing log file.
Last edited by Akikyo (2014-07-24 21:04:45)

I can't be sure but most of the dota2 output looks "normal" to me (I get the same yet it works fine).
eurotrucks is clearly crashing. You could try to force the resolution it uses in its config files?
Or maybe it's missing a lib (you may need to install 32bit versions):
ldd /path/to/eurotrucks
to see if that's the case. If not, you might have to take it up with the eurotrucks developers.
And you could try using fluxbox/openbox just to see what happens. A lot lighter than KDE.
Have a good look though: https://wiki.archlinux.org/index.php/Steam
and remember to check for missing 32bit libs.

[Solved] Problem with upgrading polkit or filesystem

Ok so first off they do "upgrade" but the problem has me worried that something is wrong.
A week or so ago after converting to systemd I tried getting rid of ConsoleKit and installing polkit 0.107 from the [testing] repo but it caused pacman to get stuck at "(1/1) upgrading polkit" So I tried that a couple of times but I could never get pacman to finish and get past that. I had to control + c to get out of that then type exit in the console (no text was visible that I typed however but typing exit + enter worked for closing it). So I then opened a new terminal and downgraded polkit back to 0.105 and waited for polkit to get pushed from testing to see if it would fix my issue. Fast forward to today and I go to upgrade my system. Among the 83 updates or so was polkit and filesystem. What do you know it gets stuck at "(15/83) upgrading polkit". Fuck so I control + c, open new terminal and then do the upgrade again and it continues to update but this time it gets stuck doing the same thing for filesystem. I control + c, open new terminal and continue the upgrade until it finishes, which it does this time, and I reboot.
I tried re-installing polkit again and filesystem again but they continue to get stuck. I cannot "complete" the upgrade even though they show the appropriate version when I check.
Terminal
[507] shauder@arch-desktop [~] $ sudo pacman -S polkit
warning: polkit-0.107-4 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): polkit-0.107-4
Total Installed Size: 1.77 MiB
Net Upgrade Size: 0.00 MiB
Proceed with installation? [Y/n]
(1/1) checking package integrity [########################################################] 100%
(1/1) loading package files [########################################################] 100%
(1/1) checking for file conflicts [########################################################] 100%
(1/1) checking available disk space [########################################################] 100%
(1/1) upgrading polkit
/var/log/pacman.log
[2012-07-18 18:27] installed filesystem (2012.6-4)
[2012-07-18 18:27] installed findutils (4.4.2-4)
[2012-07-18 18:27] installed gawk (4.0.1-1)
[2012-07-18 18:27] installed gettext (0.18.1.1-4)
[2012-07-18 18:27] installed grep (2.13-2)
[2012-07-18 18:27] installed sed (4.2.1-4)
[2012-07-18 18:27] installed grub (0.97-21)
[2012-07-18 18:27] installed gzip (1.5-1)
[2012-07-18 18:27] installed gdbm (1.10-1)
[2012-07-18 18:27] installed perl (5.16.0-2)
[2012-07-18 18:27] installed openssl (1.0.1.c-1)
[2012-07-18 18:27] installed libsasl (2.1.23-9)
[2012-07-18 18:27] installed libldap (2.4.31-4)
[2012-07-18 18:27] installed keyutils (1.5.5-3)
[2012-07-18 18:27] installed krb5 (1.10.2-2)
[2012-07-18 18:27] installed heirloom-mailx (12.5-3)
[2012-07-18 18:27] installed inetutils (1.9.1-2)
[2012-07-18 18:27] installed iproute2 (3.4.0-2)
[2012-07-18 18:27] installed sysvinit (2.88-6)
[2012-07-18 18:27] installed initscripts (2012.06.3-2)
[2012-07-18 18:27] installed sysfsutils (2.1.0-8)
[2012-07-18 18:27] >> Traceroute is now provided by core/traceroute
[2012-07-18 18:27] installed iputils (20101006-4)
[2012-07-18 18:27] installed jfsutils (1.1.15-3)
[2012-07-18 18:27] installed less (444-3)
[2012-07-18 18:27] installed licenses (2.9-1)
[2012-07-18 18:27] installed linux-firmware (20120625-1)
[2012-07-18 18:27] installed mkinitcpio-busybox (1.20.1-1)
[2012-07-18 18:27] installed expat (2.1.0-1)
[2012-07-18 18:27] installed libarchive (3.0.4-1)
[2012-07-18 18:27] installed mkinitcpio (0.9.2-2)
[2012-07-18 18:27] >>> Updating module dependencies. Please wait ...
[2012-07-18 18:27] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-07-18 18:27] ==> Building image from preset: 'default'
[2012-07-18 18:27] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-07-18 18:27] ==> Starting build: 3.4.5-1-ARCH
[2012-07-18 18:27] -> Running build hook: [base]
[2012-07-18 18:27] -> Running build hook: [udev]
[2012-07-18 18:27] -> Running build hook: [autodetect]
[2012-07-18 18:27] -> Running build hook: [pata]
[2012-07-18 18:27] -> Running build hook: [scsi]
[2012-07-18 18:27] -> Running build hook: [sata]
[2012-07-18 18:27] -> Running build hook: [filesystems]
[2012-07-18 18:27] -> Running build hook: [usbinput]
[2012-07-18 18:27] -> Running build hook: [fsck]
[2012-07-18 18:27] ==> Generating module dependencies
[2012-07-18 18:27] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-07-18 18:27] bsdcpio: Failed to set default locale
[2012-07-18 18:27] ==> Image generation successful
[2012-07-18 18:27] ==> Building image from preset: 'fallback'
[2012-07-18 18:27] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-07-18 18:27] ==> Starting build: 3.4.5-1-ARCH
[2012-07-18 18:27] -> Running build hook: [base]
[2012-07-18 18:27] -> Running build hook: [udev]
[2012-07-18 18:27] -> Running build hook: [pata]
[2012-07-18 18:27] -> Running build hook: [scsi]
[2012-07-18 18:27] -> Running build hook: [sata]
[2012-07-18 18:27] -> Running build hook: [filesystems]
[2012-07-18 18:27] -> Running build hook: [usbinput]
[2012-07-18 18:27] -> Running build hook: [fsck]
[2012-07-18 18:27] ==> Generating module dependencies
[2012-07-18 18:27] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-07-18 18:27] bsdcpio: Failed to set default locale
[2012-07-18 18:27] ==> Image generation successful
[2012-07-18 18:27] installed linux (3.4.5-1)
[2012-07-18 18:27] installed logrotate (3.8.1-2)
[2012-07-18 18:27] installed lvm2 (2.02.96-3)
[2012-07-18 18:27] installed texinfo (4.13a-7)
[2012-07-18 18:27] installed groff (1.21-2)
[2012-07-18 18:27] installed libpipeline (1.2.1-1)
[2012-07-18 18:27] it's recommended to create an initial
[2012-07-18 18:27] database running as root:
[2012-07-18 18:27] "/usr/bin/mandb --quiet"
[2012-07-18 18:27] installed man-db (2.6.2-1)
[2012-07-18 18:27] installed man-pages (3.41-1)
[2012-07-18 18:27] installed mdadm (3.2.5-2)
[2012-07-18 18:27] installed nano (2.2.6-2)
[2012-07-18 18:27] installed ca-certificates (20120623-1)
[2012-07-18 18:27] installed libssh2 (1.4.2-1)
[2012-07-18 18:27] installed curl (7.26.0-1)
[2012-07-18 18:27] installed pth (2.0.7-4)
[2012-07-18 18:27] installed libksba (1.2.0-2)
[2012-07-18 18:27] installed libassuan (2.0.3-1)
[2012-07-18 18:27] installed pinentry (0.8.1-4)
[2012-07-18 18:27] installed dirmngr (1.1.0-4)
[2012-07-18 18:27] installed gnupg (2.0.19-2)
[2012-07-18 18:27] installed gpgme (1.3.1-4)
[2012-07-18 18:27] installed pacman-mirrorlist (20120626-1)
[2012-07-18 18:27] installed archlinux-keyring (20120622-1)
[2012-07-18 18:27] >>> Run `pacman-key --init; pacman-key --populate archlinux`
[2012-07-18 18:27] >>> to import the data required by pacman for package verification.
[2012-07-18 18:27] >>> See: https://www.archlinux.org/news/having-pacman-verify-packages
[2012-07-18 18:27] installed pacman (4.0.3-3)
[2012-07-18 18:27] installed pciutils (3.1.10-1)
[2012-07-18 18:27] installed pcmciautils (018-4)
[2012-07-18 18:27] installed libnl (3.2.11-1)
[2012-07-18 18:27] installed libusbx (1.0.12-2)
[2012-07-18 18:27] installed libpcap (1.3.0-1)
[2012-07-18 18:27] installed ppp (2.4.5-3)
[2012-07-18 18:27] installed procps-ng (3.3.3-3)
[2012-07-18 18:27] installed psmisc (22.19-1)
[2012-07-18 18:27] installed reiserfsprogs (3.6.21-4)
[2012-07-18 18:27] installed shadow (4.1.5.1-1)
[2012-07-18 18:27] installed eventlog (0.2.12-3)
[2012-07-18 18:27] installed syslog-ng (3.3.5-2)
[2012-07-18 18:27] installed tar (1.26-2)
[2012-07-18 18:27] installed usbutils (006-1)
[2012-07-18 18:27] installed vi (1:050325-2)
[2012-07-18 18:27] installed wget (1.13.4-1)
[2012-07-18 18:27] installed which (2.20-5)
[2012-07-18 18:27] installed dbus-core (1.6.2-2)
[2012-07-18 18:27] installed wpa_supplicant (1.0-1)
[2012-07-18 18:27] installed xfsprogs (3.1.8-2)
[2012-07-18 18:27] installed m4 (1.4.16-2)
[2012-07-18 18:27] installed autoconf (2.69-1)
[2012-07-18 18:27] installed automake (1.12.2-1)
[2012-07-18 18:27] installed binutils (2.22-9)
[2012-07-18 18:27] installed bison (2.5.1-1)
[2012-07-18 18:27] installed fakeroot (1.18.4-1)
[2012-07-18 18:27] installed flex (2.5.35-5)
[2012-07-18 18:27] installed mpfr (3.1.1-1)
[2012-07-18 18:27] installed libmpc (0.9-2)
[2012-07-18 18:27] installed isl (0.10-1)
[2012-07-18 18:27] installed cloog (0.17.0-2)
[2012-07-18 18:27] installed ppl (1.0-1)
[2012-07-18 18:27] installed gcc (4.7.1-4)
[2012-07-18 18:27] installed libltdl (2.4.2-6)
[2012-07-18 18:27] installed libtool (2.4.2-6)
[2012-07-18 18:27] installed make (3.82-4)
[2012-07-18 18:27] installed patch (2.6.1-3)
[2012-07-18 18:27] installed pkg-config (0.27-1)
[2012-07-18 18:37] Running 'pacman -Syy'
[2012-07-18 18:37] synchronizing package lists
[2012-07-18 18:38] Running 'pacman -Syy'
[2012-07-18 18:38] synchronizing package lists
[2012-07-18 18:39] Running 'pacman -S sudo'
[2012-07-18 18:43] Running 'pacman -S sudo'
[2012-07-18 18:44] Running 'pacman -S sudo'
[2012-07-18 18:44] installed sudo (1.8.5.p2-1)
[2012-07-18 18:45] Running 'pacman -S alsa-utils'
[2012-07-18 18:46] installed alsa-lib (1.0.25-1)
[2012-07-18 18:46] installed dialog (1.1_20120706-1)
[2012-07-18 18:46] installed libogg (1.3.0-1)
[2012-07-18 18:46] installed flac (1.2.1-3)
[2012-07-18 18:46] installed libvorbis (1.3.3-1)
[2012-07-18 18:46] installed libsndfile (1.0.25-2)
[2012-07-18 18:46] installed libsamplerate (0.1.8-1)
[2012-07-18 18:46] installed alsa-utils (1.0.25-3)
[2012-07-18 18:46] Running 'pacman -S alsa-plugins'
[2012-07-18 18:46] installed alsa-plugins (1.0.25-2)
[2012-07-18 18:48] Running 'pacman -S xorg-server xorg-xinit xorg-server-utils'
[2012-07-18 18:48] installed xproto (7.0.23-1)
[2012-07-18 18:48] installed libxdmcp (1.1.1-1)
[2012-07-18 18:48] installed freetype2 (2.4.10-1)
[2012-07-18 18:48] installed libfontenc (1.1.1-1)
[2012-07-18 18:48] installed fontsproto (2.1.2-1)
[2012-07-18 18:48] installed libxfont (1.4.5-1)
[2012-07-18 18:48] installed libpciaccess (0.13.1-1)
[2012-07-18 18:48] installed libdrm (2.4.37-1)
[2012-07-18 18:48] installed pixman (0.26.2-1)
[2012-07-18 18:48] installed libxau (1.0.7-1)
[2012-07-18 18:48] installed xcb-proto (1.7.1-1)
[2012-07-18 18:48] installed libxcb (1.8.1-1)
[2012-07-18 18:48] installed kbproto (1.0.6-1)
[2012-07-18 18:48] installed libx11 (1.5.0-1)
[2012-07-18 18:48] installed libxkbfile (1.0.8-1)
[2012-07-18 18:48] installed xorg-xkbcomp (1.2.4-1)
[2012-07-18 18:48] installed xkeyboard-config (2.6-1)
[2012-07-18 18:48] installed xorg-setxkbmap (1.3.0-1)
[2012-07-18 18:48] installed xorg-fonts-encodings (1.0.4-3)
[2012-07-18 18:48] installed xorg-fonts-alias (1.0.2-2)
[2012-07-18 18:48] installed xorg-bdftopcf (1.0.3-2)
[2012-07-18 18:48] installed xorg-mkfontscale (1.1.0-1)
[2012-07-18 18:48] installed xorg-mkfontdir (1.0.7-1)
[2012-07-18 18:48] installed xorg-font-util (1.3.0-1)
[2012-07-18 18:48] installed xorg-font-utils (7.6-3)
[2012-07-18 18:48] updating font cache... done.
[2012-07-18 18:48] installed fontconfig (2.8.0-2)
[2012-07-18 18:49] Updating font cache... done.
[2012-07-18 18:49] installed xorg-fonts-misc (1.0.1-2)
[2012-07-18 18:49] installed xorg-server-common (1.12.3-1)
[2012-07-18 18:49] installed xf86-input-evdev (2.7.0-2)
[2012-07-18 18:49] installed xorg-server (1.12.3-1)
[2012-07-18 18:49] installed xextproto (7.2.1-1)
[2012-07-18 18:49] installed libxext (1.3.1-1)
[2012-07-18 18:49] installed libice (1.0.8-1)
[2012-07-18 18:49] installed libsm (1.2.1-1)
[2012-07-18 18:49] installed libxt (1.1.3-1)
[2012-07-18 18:49] installed libxmu (1.1.1-1)
[2012-07-18 18:49] installed xorg-xauth (1.0.7-1)
[2012-07-18 18:49] installed xorg-xinit (1.3.2-1)
[2012-07-18 18:49] installed xorg-iceauth (1.0.5-1)
[2012-07-18 18:49] installed xorg-sessreg (1.0.7-1)
[2012-07-18 18:49] installed xorg-xcmsdb (1.0.4-1)
[2012-07-18 18:49] installed renderproto (0.11.1-2)
[2012-07-18 18:49] installed libxrender (0.9.7-1)
[2012-07-18 18:49] installed randrproto (1.3.2-2)
[2012-07-18 18:49] installed libxrandr (1.3.2-2)
[2012-07-18 18:49] installed xorg-xbacklight (1.1.2-3)
[2012-07-18 18:49] installed xf86vidmodeproto (2.3.1-2)
[2012-07-18 18:49] installed libxxf86vm (1.1.2-1)
[2012-07-18 18:49] installed xorg-xgamma (1.0.5-1)
[2012-07-18 18:49] installed xorg-xhost (1.0.5-1)
[2012-07-18 18:49] installed xorg-xrandr (1.3.5-1)
[2012-07-18 18:49] installed inputproto (2.2-1)
[2012-07-18 18:49] installed libxi (1.6.1-1)
[2012-07-18 18:49] installed xineramaproto (1.2.1-2)
[2012-07-18 18:49] installed libxinerama (1.1.2-1)
[2012-07-18 18:49] installed xorg-xinput (1.6.0-1)
[2012-07-18 18:49] installed xorg-xmodmap (1.0.7-1)
[2012-07-18 18:49] installed mcpp (2.7.2-4)
[2012-07-18 18:49] installed xorg-xrdb (1.0.9-2)
[2012-07-18 18:49] installed xorg-xrefresh (1.0.4-3)
[2012-07-18 18:49] installed xorg-xset (1.2.2-1)
[2012-07-18 18:49] installed fixesproto (5.0-2)
[2012-07-18 18:49] installed libxfixes (5.0-2)
[2012-07-18 18:49] installed libxcursor (1.1.13-1)
[2012-07-18 18:49] installed xorg-xsetroot (1.1.0-3)
[2012-07-18 18:49] installed xorg-server-utils (7.6-3)
[2012-07-18 18:50] Running 'pacman -S nvidia nvidia-utils'
[2012-07-18 18:50] Running 'pacman -S nvidia nvidia-utils lib32-nvidia-utils'
[2012-07-18 18:51] installed videoproto (2.3.1-2)
[2012-07-18 18:51] installed libxv (1.0.7-1)
[2012-07-18 18:51] installed libxvmc (1.0.7-1)
[2012-07-18 18:51] installed nvidia-utils (302.17-1)
[2012-07-18 18:51] In order to use nvidia module, reboot the system.
[2012-07-18 18:51] installed nvidia (302.17-3)
[2012-07-18 18:51] installed lib32-glibc (2.16.0-2)
[2012-07-18 18:51] installed lib32-libxdmcp (1.1.1-1)
[2012-07-18 18:51] installed lib32-libxau (1.0.7-1)
[2012-07-18 18:51] installed lib32-libxcb (1.8.1-2)
[2012-07-18 18:51] installed lib32-libx11 (1.5.0-1)
[2012-07-18 18:51] installed lib32-libxext (1.3.1-1)
[2012-07-18 18:51] installed lib32-libxv (1.0.7-1)
[2012-07-18 18:51] installed lib32-libxvmc (1.0.7-1)
[2012-07-18 18:51] installed lib32-zlib (1.2.7-1)
[2012-07-18 18:51] installed lib32-gcc-libs (4.7.1-4.1)
[2012-07-18 18:51] installed lib32-nvidia-utils (302.17-1)
[2012-07-18 18:55] Running 'pacman -S xorg-twm xorg-xclock xterm'
[2012-07-18 18:55] installed xorg-twm (1.0.7-1)
[2012-07-18 18:55] installed libxpm (3.5.10-1)
[2012-07-18 18:55] installed libxaw (1.0.11-1)
[2012-07-18 18:55] installed libxft (2.3.1-1)
[2012-07-18 18:55] installed xorg-xclock (1.0.6-1)
[2012-07-18 18:55] installed xorg-luit (1.1.1-1)
[2012-07-18 18:55] installed xbitmaps (1.1.1-2)
[2012-07-18 18:55] installed xterm (281-1)
[2012-07-18 18:55] Running 'pacman -S dbus'
[2012-07-18 18:55] installed dbus (1.6.2-1)
[2012-07-18 18:56] Running 'pacman -S ttf-dejavu'
[2012-07-18 18:56] installed ttf-dejavu (2.33-3)
[2012-07-18 18:57] Running 'pacman -S awesome'
[2012-07-18 18:57] installed libpng (1.5.11-1)
[2012-07-18 18:57] installed cairo (1.12.2-2)
[2012-07-18 18:57] installed libjpeg-turbo (1.2.1-1)
[2012-07-18 18:57] installed libtiff (4.0.2-1)
[2012-07-18 18:57] installed giflib (4.1.6-5)
[2012-07-18 18:57] installed libid3tag (0.15.1b-7)
[2012-07-18 18:57] installed imlib2 (1.4.5-2)
[2012-07-18 18:57] installed libev (4.11-1)
[2012-07-18 18:57] installed libxdg-basedir (1.2.0-1)
[2012-07-18 18:57] installed lua (5.1.5-2)
[2012-07-18 18:57] installed libdatrie (0.2.5-1)
[2012-07-18 18:57] installed libthai (0.1.17-1)
[2012-07-18 18:57] installed pango (1.30.1-1)
[2012-07-18 18:57] installed xcb-util (0.3.9-1)
[2012-07-18 18:57] installed startup-notification (0.12-3)
[2012-07-18 18:57] installed xcb-util-image (0.3.9-1)
[2012-07-18 18:57] installed xcb-util-keysyms (0.3.9-1)
[2012-07-18 18:57] installed xcb-util-wm (0.3.9-1)
[2012-07-18 18:57] installed xorg-xmessage (1.0.3-2)
[2012-07-18 18:57] installed awesome (3.4.13-1)
[2012-07-18 18:58] Running 'pacman -S rlwrap feh'
[2012-07-18 18:58] installed rlwrap (0.37-2)
[2012-07-18 18:58] installed giblib (1.2.4-5)
[2012-07-18 18:58] installed libexif (0.6.20-2)
[2012-07-18 18:58] installed feh (2.5-1)
[2012-07-18 18:59] Running 'pacman -S packer'
[2012-07-18 18:59] Running 'pacman -S lightdm'
[2012-07-18 19:01] Running 'pacman -S fakeroot'
[2012-07-18 19:01] upgraded fakeroot (1.18.4-1 -> 1.18.4-1)
[2012-07-18 19:08] Running 'pacman -S git'
[2012-07-18 19:08] installed perl-error (0.17018-1)
[2012-07-18 19:08] installed git (1.7.11.2-1)
[2012-07-18 19:08] Running 'pacman -S jshon'
[2012-07-18 19:08] installed jansson (2.3-1)
[2012-07-18 19:08] installed jshon (20111222-1)
[2012-07-18 19:08] Running 'pacman -U packer-20120718-1-any.pkg.tar.xz'
[2012-07-18 19:08] installed packer (20120718-1)
[2012-07-18 19:10] Running 'pacman --noconfirm --asdeps -S -- accountsservice dbus-glib gobject-introspection intltool itstool libxklavier'
[2012-07-18 19:10] installed polkit (0.105-1)
[2012-07-18 19:10] installed accountsservice (0.6.22-1)
[2012-07-18 19:10] installed dbus-glib (0.100-1)
[2012-07-18 19:10] installed sqlite (3.7.13-1)
[2012-07-18 19:10] installed python2 (2.7.3-2)
[2012-07-18 19:10] installed gobject-introspection (1.32.1-2)
[2012-07-18 19:10] installed perl-xml-parser (2.41-3)
[2012-07-18 19:10] installed intltool (0.50.2-1)
[2012-07-18 19:10] installed libxml2 (2.7.8-2)
[2012-07-18 19:10] installed itstool (1.1.2-1)
[2012-07-18 19:10] installed iso-codes (3.34-1)
[2012-07-18 19:10] installed libxklavier (5.2.1-2)
[2012-07-18 19:13] Running 'pacman -U lightdm-1.3.1-4-x86_64.pkg.tar.xz'
[2012-07-18 19:14] You need to install lightdm-gtk-greeter to run the default and most stable greeter
[2012-07-18 19:14] installed lightdm (1.3.1-4)
[2012-07-18 19:14] Running 'pacman --noconfirm --asdeps -S -- archlinux-wallpaper bzr gnome-common gnome-doc-utils gtk-doc gtk-engines libwebkit vala'
[2012-07-18 19:15] ==> Wallpapers have been installed to /usr/share/archlinux/wallpaper
[2012-07-18 19:15] installed archlinux-wallpaper (1.4-1)
[2012-07-18 19:15] installed bzr (2.5.1-1)
[2012-07-18 19:15] installed gnome-common (3.4.0.1-2)
[2012-07-18 19:15] installed libxslt (1.1.26-3)
[2012-07-18 19:15] installed docbook-xml (4.5-5)
[2012-07-18 19:15] installed rarian (0.8.1-2)
[2012-07-18 19:15] installed gnome-doc-utils (0.20.10-1)
[2012-07-18 19:15] installed docbook-xsl (1.77.1-2)
[2012-07-18 19:15] installed gtk-doc (1.18-1)
[2012-07-18 19:15] installed atk (2.4.0-1)
[2012-07-18 19:15] installed compositeproto (0.4.2-2)
[2012-07-18 19:15] installed libxcomposite (0.4.3-2)
[2012-07-18 19:15] installed damageproto (1.2.1-2)
[2012-07-18 19:15] installed libxdamage (1.1.3-2)
[2012-07-18 19:15] installed shared-mime-info (1.0-1)
[2012-07-18 19:15] installed libtasn1 (2.13-1)
[2012-07-18 19:15] installed nettle (2.5-1)
[2012-07-18 19:15] installed p11-kit (0.12-1)
[2012-07-18 19:15] installed gnutls (3.0.21-1)
[2012-07-18 19:15] installed libdaemon (0.14-2)
[2012-07-18 19:15] ==> The following daemons may be added to DAEMONS in /etc/rc.conf:
[2012-07-18 19:15] ==> avahi-daemon: the mdns responder, you probably want this.
[2012-07-18 19:15] ==> dbus needs to be running when you start it.
[2012-07-18 19:15] ==> avahi-dnsconfd: daemon used for peer-to-peer automatic dns
[2012-07-18 19:15] ==> configuration on dhcp-less networks.
[2012-07-18 19:15]
[2012-07-18 19:15] ==> To use some of the client applications you will have to install python.
[2012-07-18 19:15] ==> In addition, pygtk is required for the graphical ones and
[2012-07-18 19:15] ==> twisted for avahi-bookmarks.
[2012-07-18 19:15] installed avahi (0.6.31-3)
[2012-07-18 19:15] installed libcups (1.5.3-5)
[2012-07-18 19:15] installed gdk-pixbuf2 (2.26.1-1)
[2012-07-18 19:15] installed gtk-update-icon-cache (2.24.10-3)
[2012-07-18 19:15] installed gtk2 (2.24.10-3)
[2012-07-18 19:15] installed gtk-engines (2.21.0-1)
[2012-07-18 19:15] installed icu (49.1.2-1)
[2012-07-18 19:15] installed gstreamer0.10 (0.10.36-1)
[2012-07-18 19:15] installed orc (0.4.16-1)
[2012-07-18 19:15] installed gstreamer0.10-base (0.10.36-1)
[2012-07-18 19:15] installed libproxy (0.4.7-2)
[2012-07-18 19:15] installed gsettings-desktop-schemas (3.4.2-1)
[2012-07-18 19:15] installed glib-networking (2.32.3-1)
[2012-07-18 19:15] installed libsoup (2.38.1-1)
[2012-07-18 19:15] ==> aspell comes with no default dictionary
[2012-07-18 19:15] installed aspell (0.60.6.1-1)
[2012-07-18 19:15] installed hunspell (1.3.2-1)
[2012-07-18 19:15] installed hspell (1.1-2)
[2012-07-18 19:15] installed enchant (1.6.0-4)
[2012-07-18 19:15] installed geoclue (0.12.0-5)
[2012-07-18 19:15] installed libwebkit (1.8.1-1)
[2012-07-18 19:15] installed vala (0.16.1-1)
[2012-07-18 19:16] Running 'pacman -U lightdm-webkit-greeter-bzr-13-3-x86_64.pkg.tar.xz'
[2012-07-18 19:16] Running 'pacman -U lightdm-webkit-greeter-0.1.2-3-x86_64.pkg.tar.xz'
[2012-07-18 19:16] installed lightdm-webkit-greeter (0.1.2-3)
[2012-07-18 19:47] Running 'pacman -R lightdm'
[2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice dbus-glib libxklavier'
[2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice enchant geoclue dbus-glib libxklavier'
[2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice libwebkite enchant geoclue dbus-glib libxklavier'
[2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice libwebkit enchant geoclue dbus-glib libxklavier'
[2012-07-18 19:49] removed lightdm-webkit-greeter (0.1.2-3)
[2012-07-18 19:49] removed libwebkit (1.8.1-1)
[2012-07-18 19:49] removed geoclue (0.12.0-5)
[2012-07-18 19:49] removed enchant (1.6.0-4)
[2012-07-18 19:49] userdel: user lightdm is currently used by process 657
[2012-07-18 19:49] groupdel: cannot remove the primary group of user 'lightdm'
[2012-07-18 19:49] removed lightdm (1.3.1-4)
[2012-07-18 19:49] removed libxklavier (5.2.1-2)
[2012-07-18 19:49] removed dbus-glib (0.100-1)
[2012-07-18 19:49] removed accountsservice (0.6.22-1)
[2012-07-18 19:50] Running 'pacman -S chromium'
[2012-07-18 19:50] installed dbus-glib (0.100-1)
[2012-07-18 19:50] installed nspr (4.9.1-1)
[2012-07-18 19:50] installed nss (3.13.5-1)
[2012-07-18 19:50] installed xdg-utils (1.1.0-2.20120520)
[2012-07-18 19:50] installed libevent (2.0.19-1)
[2012-07-18 19:50] installed scrnsaverproto (1.2.2-1)
[2012-07-18 19:50] installed libxss (1.2.2-1)
[2012-07-18 19:50] installed desktop-file-utils (0.20-1)
[2012-07-18 19:50] installed hicolor-icon-theme (0.12-2)
[2012-07-18 19:50] installed chromium (20.0.1132.57-1)
[2012-07-18 19:50] Running 'pacman -Sy abs'
[2012-07-18 19:50] synchronizing package lists
[2012-07-18 19:51] installed rsync (3.0.9-3)
[2012-07-18 19:51] installed abs (2.4.3-2)
[2012-07-18 19:52] Running 'pacman -S openjdk6 perl git gnupg flex bison gperf zip unzip wxgtk squashfs-tools ncurses libpng zlib libusb libusb-compat readline'
[2012-07-18 19:53] installed ca-certificates-java (20120608-1)
[2012-07-18 19:53] installed recordproto (1.14.2-1)
[2012-07-18 19:53] installed libxtst (1.2.1-1)
[2012-07-18 19:53] upgraded zlib (1.2.7-1 -> 1.2.7-1)
[2012-07-18 19:53] upgraded libpng (1.5.11-1 -> 1.5.11-1)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/NetLock_Arany_=Class_Gold=_F?tan?s?tv?ny.pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/NetLock_Arany_=Class_Gold=_F?tan?s?tv?ny.pem (No such file or directory)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/AC_Ra?z_Certic?mara_S.A..pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/AC_Ra?z_Certic?mara_S.A..pem (No such file or directory)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/Certinomis_-_Autorit?_Racine.pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/Certinomis_-_Autorit?_Racine.pem (No such file or directory)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/T?B?TAK_UEKAE_K?k_Sertifika_Hizmet_Sa?lay?c?s?_-_S?r?m_3.pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/T?B?TAK_UEKAE_K?k_Sertifika_Hizmet_Sa?lay?c?s?_-_S?r?m_3.pem (No such file or directory)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/EBG_Elektronik_Sertifika_Hizmet_Sa?lay?c?s?.pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/EBG_Elektronik_Sertifika_Hizmet_Sa?lay?c?s?.pem (No such file or directory)
[2012-07-18 19:53] done.
[2012-07-18 19:53] when you use a non-reparenting window manager
[2012-07-18 19:53] set _JAVA_AWT_WM_NONREPARENTING=1 in
[2012-07-18 19:53] /etc/profile.d/openjdk6.sh
[2012-07-18 19:53] installed openjdk6 (6.b24_1.11.3-1)
[2012-07-18 19:53] upgraded perl (5.16.0-2 -> 5.16.0-2)
[2012-07-18 19:53] upgraded git (1.7.11.2-1 -> 1.7.11.2-1)
[2012-07-18 19:53] upgraded ncurses (5.9-3 -> 5.9-3)
[2012-07-18 19:53] upgraded readline (6.2.003-2 -> 6.2.003-2)
[2012-07-18 19:53] upgraded gnupg (2.0.19-2 -> 2.0.19-2)
[2012-07-18 19:53] upgraded flex (2.5.35-5 -> 2.5.35-5)
[2012-07-18 19:53] upgraded bison (2.5.1-1 -> 2.5.1-1)
[2012-07-18 19:53] installed gperf (3.0.4-4)
[2012-07-18 19:53] installed zip (3.0-3)
[2012-07-18 19:53] installed unzip (6.0-6)
[2012-07-18 19:53] installed wxgtk (2.8.12.1-3)
[2012-07-18 19:53] installed lzo2 (2.06-1)
[2012-07-18 19:53] installed squashfs-tools (4.2-2)
[2012-07-18 19:53] upgraded libusbx (1.0.12-2 -> 1.0.12-2)
[2012-07-18 19:53] installed libusb-compat (0.1.4-2)
[2012-07-18 19:53] Running 'pacman -S -- esdl schedtool'
[2012-07-18 19:54] installed erlang (R15B01-1)
[2012-07-18 19:54] installed sdl (1.2.15-1)
[2012-07-18 19:54] installed dri2proto (2.6-1)
[2012-07-18 19:54] installed glproto (1.4.15-1)
[2012-07-18 19:54] installed mesa (8.0.4-1)
[2012-07-18 19:54] installed esdl (2:1.2-1)
[2012-07-18 19:54] installed schedtool (1.3.0-2)
[2012-07-18 19:55] Running 'pacman -U pngcrush-1.7.31-1-x86_64.pkg.tar.xz'
[2012-07-18 19:55] installed pngcrush (1.7.31-1)
[2012-07-18 19:55] Running 'pacman -U repo-1.17-1-x86_64.pkg.tar.xz'
[2012-07-18 19:55] installed repo (1.17-1)
[2012-07-18 19:59] Running 'pacman -S terminator'
[2012-07-18 19:59] installed vte-common (0.32.2-1)
[2012-07-18 19:59] installed vte (0.28.2-3)
[2012-07-18 19:59] installed libglade (2.6.4-3)
[2012-07-18 19:59] installed python2-cairo (1.10.0-1)
[2012-07-18 19:59] installed pygobject2-devel (2.28.6-6)
[2012-07-18 19:59] installed python2-gobject2 (2.28.6-6)
[2012-07-18 19:59] installed pygtk (2.24.0-3)
[2012-07-18 19:59] installed terminator (0.96-1)
[2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-libusb lib32-libusb-compat lib32-readline lib32-glibc lib32-zlib'
[2012-07-18 20:00] synchronizing package lists
[2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-libusb-compat lib32-readline lib32-glibc lib32-zlib'
[2012-07-18 20:00] synchronizing package lists
[2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-readline lib32-glibc lib32-zlib'
[2012-07-18 20:00] synchronizing package lists
[2012-07-18 20:01] removed gcc-libs (4.7.1-4)
[2012-07-18 20:01] removed binutils (2.22-9)
[2012-07-18 20:01] removed gcc (4.7.1-4)
[2012-07-18 20:01] removed libtool (2.4.2-6)
[2012-07-18 20:01] installed gcc-libs-multilib (4.7.1-4.1)
[2012-07-18 20:01] installed binutils-multilib (2.22-8)
[2012-07-18 20:01] installed gcc-multilib (4.7.1-4.1)
[2012-07-18 20:01] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
[2012-07-18 20:01] installed lib32-libltdl (2.4.2-6)
[2012-07-18 20:01] installed libtool-multilib (2.4.2-6)
[2012-07-18 20:01] installed lib32-ncurses (5.9-1)
[2012-07-18 20:01] installed lib32-readline (6.2.003-1)
[2012-07-18 20:01] upgraded lib32-zlib (1.2.7-1 -> 1.2.7-1)
[2012-07-18 20:07] Running 'pacman -S ssh'
[2012-07-18 20:10] Running 'pacman -S ssh-keygen'
[2012-07-18 20:10] Running 'pacman -S openssh'
[2012-07-18 20:10] installed libedit (20120311_3.0-1)
[2012-07-18 20:10] installed dnssec-anchors (20120422-1)
[2012-07-18 20:10] installed ldns (1.6.13-1)
[2012-07-18 20:10] installed openssh (6.0p1-3)
[2012-07-18 20:11] Running 'pacman -S pbcopy'
[2012-07-18 20:11] Running 'pacman -S copy'
[2012-07-18 20:13] Running 'pacman -S gedit'
[2012-07-18 20:13] installed lcms2 (2.3-2)
[2012-07-18 20:13] installed libgusb (0.1.3-1)
[2012-07-18 20:13] installed gd (2.0.36RC1-5)
[2012-07-18 20:13] installed libgphoto2 (2.4.14-1)
[2012-07-18 20:13] installed libieee1284 (0.2.11-4)
[2012-07-18 20:13] installed v4l-utils (0.8.8-1)
[2012-07-18 20:13] installed net-snmp (5.7.1-3)
[2012-07-18 20:13] NOTE
[2012-07-18 20:13] ----
[2012-07-18 20:13] Add your user to group 'scanner' to use scanner devices.
[2012-07-18 20:13] installed sane (1.0.22-9)
[2012-07-18 20:13] installed shared-color-profiles (0.1.5-1)
[2012-07-18 20:13] installed colord (0.1.21-2)
[2012-07-18 20:13] installed gtk3 (3.4.3-1)
[2012-07-18 20:13] installed gtksourceview3 (3.4.2-1)
[2012-07-18 20:13] installed libpeas (1.4.0-2)
[2012-07-18 20:13] installed enchant (1.6.0-4)
[2012-07-18 20:13] installed pygobject-devel (3.2.2-1)
[2012-07-18 20:13] installed python2-gobject (3.2.2-1)
[2012-07-18 20:13] installed dconf (0.12.1-2)
[2012-07-18 20:13] installed gedit (3.4.2-1)
[2012-07-18 20:15] Running 'pacman -S python'
[2012-07-18 20:16] installed python (3.2.3-3)
[2012-07-18 20:26] Running 'pacman -S xclip'
[2012-07-18 20:26] installed xclip (0.12-3)
[2012-07-18 20:37] Running 'pacman --noconfirm --asdeps -S -- lib32-alsa-lib lib32-libstdc++5 lib32-openal lib32-sdl swt'
[2012-07-18 20:37] installed lib32-alsa-lib (1.0.25-1)
[2012-07-18 20:37] installed lib32-libstdc++5 (3.3.6-6)
[2012-07-18 20:37] installed openal (1.14-1)
[2012-07-18 20:37] installed lib32-openal (1.14-1)
[2012-07-18 20:37] installed lib32-libxrender (0.9.7-1)
[2012-07-18 20:37] installed lib32-sdl (1.2.15-2)
[2012-07-18 20:37] installed swt (3.7.2-1)
[2012-07-18 20:45] Running 'pacman --asdeps -U android-sdk-r20-2-x86_64.pkg.tar.xz'
[2012-07-18 20:50] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
[2012-07-18 20:50] The android group has been removed, install android packages as root.
[2012-07-18 20:50] installed android-sdk (r20-2)
[2012-07-18 20:51] Running 'pacman -U android-sdk-r20-2-x86_64.pkg.tar.xz'
[2012-07-18 20:54] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
[2012-07-18 20:54] The android group has been removed, install android packages as root.
[2012-07-18 20:54] upgraded android-sdk (r20-2 -> r20-2)
[2012-07-18 20:59] Running 'pacman -U android-sdk-platform-tools-r12-1-any.pkg.tar.xz'
[2012-07-18 20:59] installed android-sdk-platform-tools (r12-1)
[2012-07-18 21:10] Running 'pacman -S perl-switch'
[2012-07-18 21:10] installed perl-switch (2.16-1)
[2012-07-21 03:29] Running 'pacman -S flashplugin'
[2012-07-21 03:29] relogin or source /etc/profile.d/mozilla-common.sh
[2012-07-21 03:29] installed mozilla-common (1.4-3)
[2012-07-21 03:29] >>
[2012-07-21 03:29] >> If you have an NVIDIA card that supports libvdpau or Broadcom Crystal HD chips,
[2012-07-21 03:29] >> uncomment EnableLinuxHWVideoDecode=1 from /etc/adobe/mms.cfg.
[2012-07-21 03:29] >> If you run into problems, please contact nVidia or Broadcom along with your system config info / driver version.
[2012-07-21 03:29] >>
[2012-07-21 03:29] installed flashplugin (11.2.202.236-1)
[2012-07-21 03:32] Running 'pacman -S libvdpau'
[2012-07-21 03:32] installed libvdpau (0.4.1-2)
[2012-07-21 14:53] Running 'pacman -S gedit-common'
[2012-07-21 14:55] Running 'pacman -S gtk-theme-switch2'
[2012-07-21 14:56] installed gtk-theme-switch2 (2.1.0-2)
[2012-07-21 15:00] Running 'pacman -S gtk-icons'
[2012-07-21 15:04] Running 'pacman -R gtk-theme-switch2 gedit dconf desktop-file-utils enchant gsettings-desktop-schemas gtksourceview3 iso-codes libpeas libsm python2-gobject'
[2012-07-21 15:06] Running 'pacman -R gtk-theme-switch2 gedit dconf enchant gtksourceview3 iso-codes libpeas python2-gobject'
[2012-07-21 15:06] removed gedit (3.4.2-1)
[2012-07-21 15:06] removed python2-gobject (3.2.2-1)
[2012-07-21 15:06] removed libpeas (1.4.0-2)
[2012-07-21 15:06] removed iso-codes (3.34-1)
[2012-07-21 15:06] removed gtksourceview3 (3.4.2-1)
[2012-07-21 15:06] removed enchant (1.6.0-4)
[2012-07-21 15:06] removed dconf (0.12.1-2)
[2012-07-21 15:06] removed gtk-theme-switch2 (2.1.0-2)
[2012-07-21 15:06] Running 'pacman -R glib-networking gsettings-desktop-schemas'
[2012-07-21 15:06] Running 'pacman -R libsoup glib-networking gsettings-desktop-schemas'
[2012-07-21 15:06] removed libsoup (2.38.1-1)
[2012-07-21 15:06] removed glib-networking (2.32.3-1)
[2012-07-21 15:06] removed gsettings-desktop-schemas (3.4.2-1)
[2012-07-21 15:07] Running 'pacman -R wxgtk'
[2012-07-21 15:07] removed wxgtk (2.8.12.1-3)
[2012-07-21 15:07] Running 'pacman -R libxt libsm'
[2012-07-21 15:11] Running 'pacman -S ranger'
[2012-07-21 15:11] installed ranger (1.5.4-1)
[2012-07-21 15:32] Running 'pacman -S irssi'
[2012-07-21 15:32] installed irssi (0.8.15-6)
[2012-07-24 20:20] Running 'pacman -U sublime-text-2.0.1-1-x86_64.pkg.tar.xz'
[2012-07-24 20:20] installed sublime-text (2.0.1-1)
[2012-07-24 23:41] Running 'pacman -U dropbox-1.4.11-1-x86_64.pkg.tar.xz'
[2012-07-24 23:41] installed dropbox (1.4.11-1)
[2012-07-24 23:41] Running 'pacman -U dropbox-daemon-0.8-8-any.pkg.tar.xz'
[2012-07-24 23:41] >> Configure the Dropbox daemon script by editing /etc/conf.d/dropboxd.conf
[2012-07-24 23:41] installed dropbox-daemon (0.8-8)
[2012-07-24 23:48] Running 'pacman -U dropbox-cli-1-12-x86_64.pkg.tar.xz'
[2012-07-24 23:48] installed dropbox-cli (1-12)
[2012-07-24 23:49] Running 'pacman -S nautilus'
[2012-07-24 23:56] Running 'pacman -S ranger'
[2012-07-24 23:57] upgraded ranger (1.5.4-1 -> 1.5.4-1)
[2012-07-25 00:23] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
[2012-07-25 00:23] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
[2012-07-25 00:23] Running 'pacman -Sy'
[2012-07-25 00:23] synchronizing package lists
[2012-07-25 00:24] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
[2012-07-25 00:25] installed gconf (3.2.5-2)
[2012-07-25 00:25] installed libmng (1.0.10-4)
[2012-07-25 00:25] installed qt (4.8.2-3)
[2012-07-25 00:25] installed qtwebkit (2.2.2-1)
[2012-07-25 00:27] Running 'pacman --asdeps -U openssl098-0.9.8.x-1-x86_64.pkg.tar.xz'
[2012-07-25 00:27] installed openssl098 (0.9.8.x-1)
[2012-07-25 00:28] Running 'pacman --asdeps -U libpng12-1.2.49-1-x86_64.pkg.tar.xz'
[2012-07-25 00:28] installed libpng12 (1.2.49-1)
[2012-07-25 00:30] Running 'pacman -U spotify-0.8.4.103-1-x86_64.pkg.tar.xz'
[2012-07-25 00:31] installed spotify (0.8.4.103-1)
[2012-07-29 16:57] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
[2012-07-29 16:58] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
[2012-07-29 16:58] Running 'pacman -Syy'
[2012-07-29 16:58] synchronizing package lists
[2012-07-29 17:00] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
[2012-07-29 17:00] installed gsm (1.0.13-7)
[2012-07-29 17:00] installed lame (3.99.5-1)
[2012-07-29 17:00] installed libasyncns (0.8-4)
[2012-07-29 17:00] installed json-c (0.9-1)
[2012-07-29 17:00] installed libpulse (2.1-1)
[2012-07-29 17:00] installed libtheora (1.1.1-2)
[2012-07-29 17:00] installed libglapi (8.0.4-2)
[2012-07-29 17:00] installed khrplatform-devel (8.0.4-2)
[2012-07-29 17:00] installed libegl (8.0.4-2)
[2012-07-29 17:00] installed libva (1.1.0-1)
[2012-07-29 17:00] installed libvpx (1.1.0-1)
[2012-07-29 17:00] installed opencore-amr (0.1.3-1)
[2012-07-29 17:00] installed openjpeg (1.5.0-1)
[2012-07-29 17:00] installed rtmpdump (2.4-1)
[2012-07-29 17:00] installed schroedinger (1.0.11-1)
[2012-07-29 17:00] installed speex (1.2rc1-2)
[2012-07-29 17:00] installed x264 (20120705-1)
[2012-07-29 17:00] installed xvidcore (1.3.2-1)
[2012-07-29 17:00] installed ffmpeg (1:0.11.1-1)
[2012-07-29 17:00] installed libmms (0.6.2-1)
[2012-07-29 17:00] installed libzen (0.4.26-1)
[2012-07-29 17:00] installed libmediainfo (0.7.58-1)
[2012-07-29 17:00] installed recode (3.6-7)
[2012-07-29 17:00] installed enca (1.13-2)
[2012-07-29 17:00] installed a52dec (0.7.4-6)
[2012-07-29 17:00] installed libdca (0.0.5-3)
[2012-07-29 17:00] installed talloc (2.0.7-1)
[2012-07-29 17:00] installed libwbclient (3.6.6-1)
[2012-07-29 17:00] installed libcap-ng (0.6.6-1)
[2012-07-29 17:00] installed cifs-utils (5.5-1)
[2012-07-29 17:00] installed tdb (1.2.9-2)
[2012-07-29 17:00] installed smbclient (3.6.6-1)
[2012-07-29 17:00] installed libmad (0.15.1b-6)
[2012-07-29 17:00] installed fribidi (0.19.2-2)
[2012-07-29 17:00] installed libmp4v2 (2.0.0-2)
[2012-07-29 17:00] installed faac (1.28-4)
[2012-07-29 17:00] installed faad2 (2.7-3)
[2012-07-29 17:00] installed mpg123 (1.14.4-1)
[2012-07-29 17:00] installed libass (0.10.0-3)
[2012-07-29 17:00] installed libbluray (0.2.2-1)
[2012-07-29 17:00] installed libcddb (1.3.2-3)
[2012-07-29 17:00] installed libcdio (0.83-1)
[2012-07-29 17:00] installed mencoder (35014-1)
[2012-07-29 17:00] installed libftdi (0.20-1)
[2012-07-29 17:00] installed libirman (0.4.5-3)
[2012-07-29 17:00] installed lirc-utils (1:0.9.0-22)
[2012-07-29 17:00] installed gpm (1.20.6-10)
[2012-07-29 17:00] installed aalib (1.4rc5-9)
[2012-07-29 17:00] installed jack (0.121.3-6)
[2012-07-29 17:00] installed libcaca (0.99.beta18-1)
[2012-07-29 17:00] installed xf86dgaproto (2.1-2)
[2012-07-29 17:00] installed libxxf86dga (1.1.3-1)
[2012-07-29 17:00] installed mplayer (35014-1)
[2012-07-29 17:00] Running 'pacman -U pms-1.60.0-1-x86_64.pkg.tar.xz'
[2012-07-29 17:00] installed pms (1.60.0-1)
[2012-07-29 17:20] Running 'pacman -S netstat'
[2012-07-29 17:31] Running 'pacman -S ntfs-3g'
[2012-07-29 17:31] installed fuse (2.9.0-1)
[2012-07-29 17:31] installed ntfs-3g (2012.1.15-3)
[2012-07-29 17:45] Running 'pacman -S tsmuxer'
[2012-07-29 17:45] Running 'pacman -S tsMuxeR'
[2012-07-29 17:45] Running 'pacman --noconfirm --asdeps -S -- lib32-freetype2'
[2012-07-29 17:45] installed lib32-bzip2 (1.0.6-1)
[2012-07-29 17:45] installed lib32-freetype2 (2.4.10-1)
[2012-07-29 17:48] Running 'pacman -U tsmuxer-1.10.6-12-x86_64.pkg.tar.xz'
[2012-07-29 17:48] The tsmuxer package is licensed software.
[2012-07-29 17:48] You MUST read and agree to the license stored in
[2012-07-29 17:48] /opt/tsmuxer/LICENSE before using it.
[2012-07-29 17:48] installed tsmuxer (1.10.6-12)
[2012-07-29 18:23] Running 'pacman -S icedtea-web-java7'
[2012-07-29 18:23] Running 'pacman -S icedtea-web-java6'
[2012-07-29 18:24] Running 'pacman -S openjre'
[2012-07-29 18:25] Running 'pacman -S jre'
[2012-07-29 18:25] Running 'pacman -S icetea-plugin'
[2012-07-29 18:27] Running 'pacman -S icedtea-web'
[2012-07-29 18:27] installed icedtea-web (1.2-1)
[2012-07-29 18:35] Running 'pacman -S ccache'
[2012-07-29 18:35] installed ccache (3.1.7-1)
[2012-07-29 18:50] Running 'pacman -S rtorrent'
[2012-07-29 18:50] installed libsigc++ (2.2.10-2)
[2012-07-29 18:50] installed libtorrent (0.13.2-2)
[2012-07-29 18:50] installed xmlrpc-c (1:1.31.02-2)
[2012-07-29 18:50] installed rtorrent (0.9.2-2)
[2012-07-29 18:52] Running 'pacman -S rutorrent'
[2012-07-29 18:52] Running 'pacman --noconfirm --asdeps -S -- php'
[2012-07-29 18:52] installed php (5.4.5-1)
[2012-07-29 18:52] Running 'pacman -U rutorrent-3.4-2-any.pkg.tar.xz'
[2012-07-29 18:53] installed rutorrent (3.4-2)
[2012-07-29 18:53] Running 'pacman -R rtorrent'
[2012-07-29 18:53] removed rtorrent (0.9.2-2)
[2012-07-29 18:53] Running 'pacman -S rtorrent-svn'
[2012-07-29 18:54] Running 'pacman -S rtorrent'
[2012-07-29 18:54] installed rtorrent (0.9.2-2)
[2012-07-29 18:54] Running 'pacman -S apache php-apache php-cgi mod-scgi php-xsl rutorrent-plugins php-geoip screen'
[2012-07-29 18:55] Running 'pacman -S apache php-apache php-cgi php-xsl rutorrent-plugins php-geoip screen'
[2012-07-29 18:55] Running 'pacman -S apache php-apache php-cgi php-xsl php-geoip screen'
[2012-07-29 18:55] installed apr (1.4.6-1)
[2012-07-29 18:55] installed unixodbc (2.3.1-1)
[2012-07-29 18:55] installed apr-util (1.4.1-1)
[2012-07-29 18:55] installed apache (2.2.22-4)
[2012-07-29 18:55] installed php-apache (5.4.5-1)
[2012-07-29 18:55] installed php-cgi (5.4.5-1)
[2012-07-29 18:55] installed php-xsl (5.4.5-1)
[2012-07-29 18:55] installed geoip-database (20120706-1)
[2012-07-29 18:55] installed geoip (1.4.8-2)
[2012-07-29 18:55] installed php-geoip (1.0.8-2)
[2012-07-29 18:55] installed screen (4.0.3-13)
[2012-07-29 19:03] Running 'pacman -U mod_scgi-1.14-1-x86_64.pkg.tar.xz'
[2012-07-29 19:03] installed mod_scgi (1.14-1)
[2012-07-29 19:03] Running 'pacman -U rutorrent-plugins-3.4-2-any.pkg.tar.xz'
[2012-07-29 19:03] installed rutorrent-plugins (3.4-2)
[2012-07-29 19:04] Running 'pacman -U rutorrent-3.4-2-any.pkg.tar.xz'
[2012-07-29 19:04] upgraded rutorrent (3.4-2 -> 3.4-2)
[2012-07-29 19:46] Running 'pacman -S unrar unzip'
[2012-07-29 19:46] installed unrar (4.2.4-1)
[2012-07-29 19:46] upgraded unzip (6.0-6 -> 6.0-6)
[2012-07-29 20:00] Running 'pacman -S php-apache mysql'
[2012-07-29 20:02] upgraded php-apache (5.4.5-1 -> 5.4.5-1)
[2012-07-29 20:02] installed libmysqlclient (5.5.25.a-1)
[2012-07-29 20:02] installed mysql-clients (5.5.25.a-1)
[2012-07-29 20:02] Installing MySQL system tables...
[2012-07-29 20:02] OK
[2012-07-29 20:02] Filling help tables...
[2012-07-29 20:02] OK
[2012-07-29 20:02]
[2012-07-29 20:02] To start mysqld at boot time you have to copy
[2012-07-29 20:02] support-files/mysql.server to the right place for your system
[2012-07-29 20:02]
[2012-07-29 20:02] PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
[2012-07-29 20:02] To do so, start the server, then issue the following commands:
[2012-07-29 20:02]
[2012-07-29 20:02] /usr/bin/mysqladmin -u root password 'new-password'
[2012-07-29 20:02] /usr/bin/mysqladmin -u root -h arch-shauder password 'new-password'
[2012-07-29 20:02]
[2012-07-29 20:02] Alternatively you can run:
[2012-07-29 20:02] /usr/bin/mysql_secure_installation
[2012-07-29 20:02]
[2012-07-29 20:02] which will also give you the option of removing the test
[2012-07-29 20:02] databases and anonymous user created by default. This is
[2012-07-29 20:02] strongly recommended for production servers.
[2012-07-29 20:02]
[2012-07-29 20:02] See the manual for more instructions.
[2012-07-29 20:02]
[2012-07-29 20:02] You can start the MySQL daemon with:
[2012-07-29 20:02] cd /usr ; /usr/bin/mysqld_safe &
[2012-07-29 20:02]
[2012-07-29 20:02] You can test the MySQL daemon with mysql-test-run.pl
[2012-07-29 20:02] cd /usr/mysql-test ; perl mysql-test-run.pl
[2012-07-29 20:02]
[2012-07-29 20:02] Please report any problems with the /usr/scripts/mysqlbug script!
[2012-07-29 20:02]
[2012-07-29 20:02] installed mysql (5.5.25.a-1)
[2012-07-29 20:49] Running 'pacman -Syyu'
[2012-07-29 20:49] synchronizing package lists
[2012-07-29 20:50] starting full system upgrade
[2012-07-29 20:52] upgraded readline (6.2.003-2 -> 6.2.004-1)
[2012-07-29 20:52] upgraded bash (4.2.036-1 -> 4.2.037-1)
[2012-07-29 20:52] upgraded bison (2.5.1-1 -> 2.6-1)
[2012-07-29 20:52] upgraded lib32-gcc-libs (4.7.1-4.1 -> 4.7.1-5)
[2012-07-29 20:52] upgraded gcc-libs-multilib (4.7.1-4.1 -> 4.7.1-5)
[2012-07-29 20:52] upgraded gnutls (3.0.21-1 -> 3.0.21-2)
[2012-07-29 20:52] upgraded libpng (1.5.11-1 -> 1.5.12-1)
[2012-07-29 20:52] upgraded libcups (1.5.3-5 -> 1.5.4-1)
[2012-07-29 20:52] upgraded gtk-update-icon-cache (2.24.10-3 -> 2.24.11-2)
[2012-07-29 20:52] upgraded gtk2 (2.24.10-3 -> 2.24.11-2)
[2012-07-29 20:52] upgraded chromium (20.0.1132.57-1 -> 20.0.1132.57-2)
[2012-07-29 20:52] warning: /etc/protocols installed as /etc/protocols.pacnew
[2012-07-29 20:52] warning: /etc/services installed as /etc/services.pacnew
[2012-07-29 20:52] upgraded iana-etc (2.30-2 -> 2.30-3)
[2012-07-29 20:52] upgraded filesystem (2012.6-4 -> 2012.7-1)
[2012-07-29 20:52] upgraded libsystemd (186-2 -> 187-2)
[2012-07-29 20:52] upgraded glib2 (2.32.3-1 -> 2.32.4-1)
[2012-07-29 20:52] upgraded systemd-tools (186-2 -> 187-2)
[2012-07-29 20:52] upgraded dbus-core (1.6.2-2 -> 1.6.4-1)
[2012-07-29 20:52] upgraded dbus (1.6.2-1 -> 1.6.4-1)
[2012-07-29 20:52] upgraded flex (2.5.35-5 -> 2.5.36-1)
[2012-07-29 20:52] upgraded gcc-multilib (4.7.1-4.1 -> 4.7.1-5)
[2012-07-29 20:52] upgraded git (1.7.11.2-1 -> 1.7.11.3-1)
[2012-07-29 20:52] upgraded glproto (1.4.15-1 -> 1.4.16-1)
[2012-07-29 20:52] upgraded gtk3 (3.4.3-1 -> 3.4.4-1)
[2012-07-29 20:52] upgraded icu (49.1.2-1 -> 49.1.2-2)
[2012-07-29 20:52] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
[2012-07-29 20:52] upgraded initscripts (2012.06.3-2 -> 2012.07.5-1)
[2012-07-29 20:52] upgraded lib32-readline (6.2.003-1 -> 6.2.004-1)
[2012-07-29 20:52] >>> Updating module dependencies. Please wait ...
[2012-07-29 20:52] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-07-29 20:52] ==> Building image from preset: 'default'
[2012-07-29 20:52] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-07-29 20:52] ==> Starting build: 3.4.6-1-ARCH
[2012-07-29 20:52] -> Running build hook: [base]
[2012-07-29 20:52] -> Running build hook: [udev]
[2012-07-29 20:52] -> Running build hook: [autodetect]
[2012-07-29 20:52] -> Running build hook: [pata]
[2012-07-29 20:52] -> Running build hook: [scsi]
[2012-07-29 20:52] -> Running build hook: [sata]
[2012-07-29 20:52] -> Running build hook: [filesystems]
[2012-07-29 20:52] -> Running build hook: [usbinput]
[2012-07-29 20:52] -> Running build hook: [fsck]
[2012-07-29 20:52] ==> Generating module dependencies
[2012-07-29 20:52] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-07-29 20:52] ==> Image generation successful
[2012-07-29 20:52] ==> Building image from preset: 'fallback'
[2012-07-29 20:52] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-07-29 20:52] ==> Starting build: 3.4.6-1-ARCH
[2012-07-29 20:52] -> Running build hook: [base]
[2012-07-29 20:52] -> Running build hook: [udev]
[2012-07-29 20:52] -> Running build hook: [pata]
[2012-07-29 20:52] -> Running build hook: [scsi]
[2012-07-29 20:52] -> Running build hook: [sata]
[2012-07-29 20:52] -> Running build hook: [filesystems]
[2012-07-29 20:52] -> Running build hook: [usbinput]
[2012-07-29 20:52] -> Running build hook: [fsck]
[2012-07-29 20:52] ==> Generating module dependencies
[2012-07-29 20:52] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-07-29 20:52] ==> Image generation successful
[2012-07-29 20:52] upgraded linux (3.4.5-1 -> 3.4.6-1)
[2012-07-29 20:52] upgraded linux-api-headers (3.4.4-1 -> 3.4.6-1)
[2012-07-29 20:52] upgraded mesa (8.0.4-1 -> 8.0.4-2)
[2012-07-29 20:52] upgraded nvidia (302.17-3 -> 302.17-4)
[2012-07-29 20:52] upgraded tzdata (2012c-1 -> 2012d-1)
[2012-07-29 20:52] upgraded xf86-input-evdev (2.7.0-2 -> 2.7.1-1)
[2012-08-03 12:40] Running 'pacman -S filezilla'
[2012-08-03 12:40] installed wxgtk (2.8.12.1-3)
[2012-08-03 12:40] installed libidn (1.25-1)
[2012-08-03 12:40] installed filezilla (3.5.3-1)
[2012-08-06 13:55] Running 'pacman -R openjdk'
[2012-08-06 13:55] Running 'pacman -R openjdk6'
[2012-08-06 13:55] Running 'pacman -R icedtea-web'
[2012-08-06 13:55] removed icedtea-web (1.2-1)
[2012-08-06 13:56] Running 'pacman -S jdk'
[2012-08-06 13:57] Running 'pacman --asdeps -U jre-7.5-2-x86_64.pkg.tar.xz'
[2012-08-06 13:58] removed openjdk6 (6.b24_1.11.3-1)
[2012-08-06 13:58]
[2012-08-06 13:58] The jre package is licensed software.
[2012-08-06 13:58] You MUST read and agree to the license stored in
[2012-08-06 13:58] /usr/share/licenses/jre/LICENSE before using it.
[2012-08-06 13:58] Please relogin to include jre in your PATH.
[2012-08-06 13:58]
[2012-08-06 13:58] installed jre (7.5-2)
[2012-08-06 14:01] Running 'pacman -U jdk-7.5-2-x86_64.pkg.tar.xz'
[2012-08-06 14:01]
[2012-08-06 14:01] The jdk package is licensed software.
[2012-08-06 14:01] You MUST read and agree to the license stored in
[2012-08-06 14:01] /usr/share/licenses/jdk/LICENSE before using it.
[2012-08-06 14:01] Please relogin to include jdk in your PATH.
[2012-08-06 14:01]
[2012-08-06 14:01] installed jdk (7.5-2)
[2012-08-06 14:14] Running 'pacman --asdeps -U jre6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:15] Running 'pacman -R jdk jre'
[2012-08-06 14:16] Running 'pacman -U jre6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:17] Running 'pacman -Rdd jdk jre'
[2012-08-06 14:17] removed jdk (7.5-2)
[2012-08-06 14:17] removed jre (7.5-2)
[2012-08-06 14:19] Running 'pacman --asdeps -U jre6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:19] The jre package is licensed software.
[2012-08-06 14:19] You MUST read and agree to the license stored in
[2012-08-06 14:19] /opt/java/jre/LICENSE before using it.
[2012-08-06 14:19] Please relogin to include jre in your PATH.
[2012-08-06 14:19] installed jre6 (6u33-b04)
[2012-08-06 14:21] Running 'pacman -U jdk6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:21] The jdk package is licensed software.
[2012-08-06 14:21] You MUST read and agree to the license stored in
[2012-08-06 14:21] /opt/java/LICENSE before using it.
[2012-08-06 14:21] Please relogin to include jdk in your PATH
[2012-08-06 14:21] installed jdk6 (6u33-b04)
[2012-08-06 14:23] Running 'pacman -U jre6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:54] upgraded jre6 (6u33-b04 -> 6u33-b04)
[2012-08-06 17:23] Running 'pacman -S gimp'
[2012-08-06 17:23] installed lcms (1.19-2)
[2012-08-06 17:23] Updating font cache... done.
[2012-08-06 17:23] installed gsfonts (1.0.7pre44-3)
[2012-08-06 17:23] installed libwmf (0.2.8.4-9)
[2012-08-06 17:23] installed libcroco (0.6.5-1)
[2012-08-06 17:23] installed librsvg (2.36.1-1)
[2012-08-06 17:23] installed babl (0.1.10-1)
[2012-08-06 17:23] installed gegl (0.2.0-2)
[2012-08-06 17:23] installed freeglut (2.8.0-1)
[2012-08-06 17:23] installed jasper (1.900.1-7)
[2012-08-06 17:23] installed gimp (2.8.0-2)
[2012-08-06 18:25] Running 'pacman -Sy'
[2012-08-06 18:25] synchronizing package lists
[2012-08-06 18:25] Running 'pacman -S yaourt'
[2012-08-06 18:28] Running 'pacman -Sy'
[2012-08-06 18:28] synchronizing package lists
[2012-08-06 18:28] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
[2012-08-06 18:29] Running 'pacman -Sy'
[2012-08-06 18:29] synchronizing package lists
[2012-08-06 18:29] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
[2012-08-06 18:32] Running 'pacman --noconfirm --asdeps -S -- yajl'
[2012-08-06 21:50] Running 'pacman -U jdk6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 21:51] Running 'pacman -Rdd jdk6 jre6'
[2012-08-06 21:51] removed jdk6 (6u33-b04)
[2012-08-06 21:51] removed jre6 (6u33-b04)
[2012-08-06 21:54] Running 'pacman -U sun-java6-6u32-1-x86_64.pkg.tar.xz'
[2012-08-06 21:54] The sun-java6 package is licensed software.
[2012-08-06 21:54] You MUST read and agree to the license stored in
[2012-08-06 21:54] /opt/sun-java6/LICENSE before using it.
[2012-08-06 21:54]
[2012-08-06 21:54] Use '. /opt/sun-java6/envsetup.sh' to setup environment.
[2012-08-06 21:54] installed sun-java6 (6u32-1)
[2012-08-06 21:59] Running 'pacman -Syu'
[2012-08-06 21:59] synchronizing package lists
[2012-08-06 21:59] starting full system upgrade
[2012-08-06 22:00] Running 'pacman -Sy'
[2012-08-06 22:00] synchronizing package lists
[2012-08-06 22:00] Running 'pacman -S yaourt'
[2012-08-06 22:00] installed yajl (2.0.4-1)
[2012-08-06 22:00] installed package-query (1.0.1-1)
[2012-08-06 22:00] installed yaourt (1.1-1)
[2012-08-06 22:00] Running 'pacman -S extra/schedtool community/esdl'
[2012-08-06 22:00] upgraded schedtool (1.3.0-2 -> 1.3.0-2)
[2012-08-06 22:00] upgraded esdl (2:1.2-1 -> 2:1.2-1)
[2012-08-06 22:00] Running 'pacman -S extra/schedtool community/esdl'
[2012-08-06 22:00] upgraded schedtool (1.3.0-2 -> 1.3.0-2)
[2012-08-06 22:00] upgraded esdl (2:1.2-1 -> 2:1.2-1)
[2012-08-06 22:00] Running 'pacman -S --asdeps --needed extra/jdk7-openjdk'
[2012-08-06 22:01] installed java-rhino (1.7R3-3)
[2012-08-06 22:01] installed jre7-openjdk-headless (7.u5_2.2.1-1)
[2012-08-06 22:01] when you use a non-reparenting window manager
[2012-08-06 22:01] set _JAVA_AWT_WM_NONREPARENTING=1 in
[2012-08-06 22:01] /etc/profile.d/jre.sh
[2012-08-06 22:01] installed jre7-openjdk (7.u5_2.2.1-1)
[2012-08-06 22:01] installed jdk7-openjdk (7.u5_2.2.1-1)
[2012-08-06 22:02] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.kJz/android-apktool-1.4.9-1-x86_64.pkg.tar.xz'
[2012-08-06 22:02] installed android-apktool (1.4.9-1)
[2012-08-06 22:04] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ubB/android-sdk-r20.0.1-1-x86_64.pkg.tar.xz'
[2012-08-06 22:05] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
[2012-08-06 22:05] The android group has been removed, install android packages as root.
[2012-08-06 22:05] upgraded android-sdk (r20-2 -> r20.0.1-1)
[2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.g9s/android-sdk-platform-tools-r14-1-any.pkg.tar.xz'
[2012-08-06 22:08] upgraded android-sdk-platform-tools (r12-1 -> r14-1)
[2012-08-06 22:08] Running 'pacman -S --asdeps --needed extra/libmtp'
[2012-08-06 22:08] installed libmtp (1.1.3-1)
[2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.0Uc/android-udev-1.3-4-any.pkg.tar.xz'
[2012-08-06 22:08] ===> In order to use adb, you have to be in the 'adbusers' group
[2012-08-06 22:08] ===> For that, use: gpasswd -a USERNAME adbusers
[2012-08-06 22:08] installed android-udev (1.3-4)
[2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.n8w/fastboot-20110628-2-any.pkg.tar.xz'
[2012-08-06 22:08] installed fastboot (20110628-2)
[2012-08-06 22:09] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.aCT/pngcrush-1.7.35-1-x86_64.pkg.tar.xz'
[2012-08-06 22:09] upgraded pngcrush (1.7.31-1 -> 1.7.35-1)
[2012-08-06 22:09] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ZNg/repo-git-20120806-1-x86_64.pkg.tar.xz'
[2012-08-06 22:10] Running 'pacman -S abs base-devel perl git gnupg flex bison gperf zip unzip sdl wxgtk squashfs-tools ncurses libpng zlib libusb libusb-compat readline alsa-lib openal'
[2012-08-06 22:11] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
[2012-08-06 22:11] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
[2012-08-06 22:11] upgraded lib32-gcc-libs (4.7.1-5 -> 4.7.1-5)
[2012-08-06 22:11] upgraded lib32-libxdmcp (1.1.1-1 -> 1.1.1-1)
[2012-08-06 22:11] upgraded lib32-libxau (1.0.7-1 -> 1.0.7-1)
[2012-08-06 22:11] upgraded lib32-libxcb (1.8.1-2 -> 1.8.1-2)
[2012-08-06 22:11] upgraded lib32-libx11 (1.5.0-1 -> 1.5.0-1)
[2012-08-06 22:11] upgraded lib32-libxext (1.3.1-1 -> 1.3.1-1)
[2012-08-06 22:11] upgraded lib32-libxrender (0.9.7-1 -> 0.9.7-1)
[2012-08-06 22:11] upgraded lib32-alsa-lib (1.0.25-1 -> 1.0.25-1)
[2012-08-06 22:11] upgraded lib32-libstdc++5 (3.3.6-6 -> 3.3.6-6)
[2012-08-06 22:11] upgraded lib32-libxv (1.0.7-1 -> 1.0.7-1)
[2012-08-06 22:11] upgraded lib32-ncurses (5.9-1 -> 5.9-1)
[2012-08-06 22:11] upgraded lib32-openal (1.14-1 -> 1.14-1)
[2012-08-06 22:11] upgraded lib32-sdl (1.2.15-2 -> 1.2.15-2)
[2012-08-06 22:11] upgraded lib32-zlib (1.2.7-1 -> 1.2.7-1)
[2012-08-06 22:11] upgraded swt (3.7.2-1 -> 3.7.2-1)
[2012-08-06 22:11] Running 'pacman -S gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-readline lib32-glibc lib32-zlib'
[2012-08-06 22:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.u2K/lib32-libusb-1.0.9-1-x86_64.pkg.tar.xz'
[2012-08-06 22:12] installed lib32-libusb (1.0.9-1)
[2012-08-06 22:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ENc/lib32-libusb-compat-0.1.4-2-x86_64.pkg.tar.xz'
[2012-08-06 22:12] installed lib32-libusb-compat (0.1.4-2)
[2012-08-06 22:16] Running 'pacman -S ps3mediaserver'
[2012-08-06 22:17] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.WIi/pms-1.60.0-2-x86_64.pkg.tar.xz'
[2012-08-06 22:17] upgraded pms (1.60.0-1 -> 1.60.0-2)
[2012-08-06 22:18] Running 'pacman -Syu'
[2012-08-06 22:18] synchronizing package lists
[2012-08-06 22:18] starting full system upgrade
[2012-08-06 22:18] Running 'pacman -Syu'
[2012-08-06 22:18] synchronizing package lists
[2012-08-06 22:18] starting full system upgrade
[2012-08-06 22:20] upgraded bison (2.6-1 -> 2.6.2-1)
[2012-08-06 22:20] upgraded chromium (20.0.1132.57-2 -> 21.0.1180.57-1)
[2012-08-06 22:20] upgraded libldap (2.4.31-4 -> 2.4.32-1)
[2012-08-06 22:20] upgraded krb5 (1.10.2-2 -> 1.10.2-3)
[2012-08-06 22:20] upgraded cifs-utils (5.5-1 -> 5.6-2)
[2012-08-06 22:20] upgraded cryptsetup (1.4.3-1 -> 1.5.0-1)
[2012-08-06 22:20] upgraded curl (7.26.0-1 -> 7.27.0-1)
[2012-08-06 22:20] upgraded flex (2.5.36-1 -> 2.5.37-1)
[2012-08-06 22:20] upgraded fuse (2.9.0-1 -> 2.9.1-1)
[2012-08-06 22:20] upgraded git (1.7.11.3-1 -> 1.7.11.4-1)
[2012-08-06 22:20] upgraded gnutls (3.0.21-2 -> 3.0.22-1)
[2012-08-06 22:20] upgraded hwids (20120711-1 -> 20120730-1)
[2012-08-06 22:20] upgraded nvidia-utils (302.17-1 -> 304.32-1)
[2012-08-06 22:20] upgraded lib32-nvidia-utils (302.17-1 -> 304.32-1)
[2012-08-06 22:20] upgraded libcups (1.5.4-1 -> 1.6.1-2)
[2012-08-06 22:20] upgraded libmysqlclient (5.5.25.a-1 -> 5.5.27-1)
[2012-08-06 22:20] upgraded libsystemd (187-2 -> 187-4)
[2012-08-06 22:20] upgraded libthai (0.1.17-1 -> 0.1.18-1)
[2012-08-06 22:20] upgraded systemd-tools (187-2 -> 187-4)
[2012-08-06 22:20] upgraded mkinitcpio (0.9.2-2 -> 0.10-1)
[2012-08-06 22:20] >>> Updating module dependencies. Please wait ...
[2012-08-06 22:20] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-08-06 22:20] ==> Building image from preset: 'default'
[2012-08-06 22:20] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-08-06 22:20] ==> Starting build: 3.4.7-1-ARCH
[2012-08-06 22:20] -> Running build hook: [base]
[2012-08-06 22:20] -> Running build hook: [udev]
[2012-08-06 22:20] -> Running build hook: [autodetect]
[2012-08-06 22:20] -> Running build hook: [pata]
[2012-08-06 22:20] -> Running build hook: [scsi]
[2012-08-06 22:20] -> Running build hook: [sata]
[2012-08-06 22:20] -> Running build hook: [filesystems]
[2012-08-06 22:20] -> Running build hook: [usbinput]
[2012-08-06 22:20] -> Running build hook: [fsck]
[2012-08-06 22:20] ==> Generating module dependencies
[2012-08-06 22:20] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-08-06 22:20] ==> Image generation successful
[2012-08-06 22:20] ==> Building image from preset: 'fallback'
[2012-08-06 22:20] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-08-06 22:20] ==> Starting build: 3.4.7-1-ARCH
[2012-08-06 22:20] -> Running build hook: [base]
[2012-08-06 22:20] -> Running build hook: [udev]
[2012-08-06 22:20] -> Running build hook: [pata]
[2012-08-06 22:20] -> Running build hook: [scsi]
[2012-08-06 22:20] -> Running build hook: [sata]
[2012-08-06 22:20] -> Running build hook: [filesystems]
[2012-08-06 22:20] -> Running build hook: [usbinput]
[2012-08-06 22:20] -> Running build hook: [fsck]
[2012-08-06 22:20] ==> Generating module dependencies
[2012-08-06 22:20] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-08-06 22:20] ==> Image generation successful
[2012-08-06 22:20] upgraded linux (3.4.6-1 -> 3.4.7-1)
[2012-08-06 22:20] upgraded mysql-clients (5.5.25.a-1 -> 5.5.27-1)
[2012-08-06 22:20] upgraded mysql (5.5.25.a-1 -> 5.5.27-1)
[2012-08-06 22:20] upgraded nspr (4.9.1-1 -> 4.9.2-1)
[2012-08-06 22:20] upgraded nvidia (302.17-4 -> 304.32-1)
[2012-08-06 22:20] upgraded tzdata (2012d-1 -> 2012e-1)
[2012-08-06 22:20] upgraded xf86-input-evdev (2.7.1-1 -> 2.7.2-1)
[2012-08-06 22:23] Running 'pacman -S openjdk'
[2012-08-06 22:23] Running 'pacman -S jdk7-openjdk'
[2012-08-06 22:24] upgraded jdk7-openjdk (7.u5_2.2.1-1 -> 7.u5_2.2.1-1)
[2012-08-06 22:24] Running 'pacman -S jre7-openjdk'
[2012-08-06 22:24] upgraded jre7-openjdk (7.u5_2.2.1-1 -> 7.u5_2.2.1-1)
[2012-08-06 22:25] Running 'pacman -R pms'
[2012-08-06 22:25] warning: /opt/pms/PMS.conf saved as /opt/pms/PMS.conf.pacsave
[2012-08-06 22:25] removed pms (1.60.0-2)
[2012-08-06 22:26] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.QTF/pms-1.60.0-2-x86_64.pkg.tar.xz'
[2012-08-06 22:26] installed pms (1.60.0-2)
[2012-08-06 22:26] Running 'pacman -S vlc'
[2012-08-06 22:26] installed libdvbpsi (0.2.2-1)
[2012-08-06 22:26] installed sdl_image (1.2.12-2)
[2012-08-06 22:26] installed libdvdread (4.2.0-1)
[2012-08-06 22:26] installed libdvdnav (4.2.0-2)
[2012-08-06 22:26] installed libkate (0.4.1-3)
[2012-08-06 22:26] installed libtiger (0.3.4-3)
[2012-08-06 22:26] installed libebml (1.2.2-2)
[2012-08-06 22:26] installed libmatroska (1.3.0-2)
[2012-08-06 22:26] installed zvbi (0.2.33-4)
[2012-08-06 22:26] installed taglib (1.7.2-2)
[2012-08-06 22:26] installed libmpcdec (1.2.6-3)
[2012-08-06 22:26] installed libupnp (1.6.17-1)
[2012-08-06 22:26] installed libshout (1:2.3.0-1)
[2012-08-06 22:26] installed libmpeg2 (0.5.1-3)
[2012-08-06 22:26] installed libmodplug (0.8.8.4-1)
[2012-08-06 22:26] installed ttf-freefont (20120503-1)
[2012-08-06 22:26] installed vlc (2.0.3-2)
[2012-08-06 22:26] Running 'pacman -S lib32-gcc-libs lib32-glibc'
[2012-08-06 22:26] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
[2012-08-06 22:26] upgraded lib32-gcc-libs (4.7.1-5 -> 4.7.1-5)
[2012-08-07 11:44] Running 'pacman --noconfirm --asdeps -S -- pacman-color'
[2012-08-07 11:44] installed pacman-color (4.0.3-1)
[2012-08-07 11:44] Running 'pacman -U packer-color-20120807-1-any.pkg.tar.xz'
[2012-08-07 11:44] installed packer-color (20120807-1)
[2012-08-07 11:50] Running 'pacman-color -S packer'
[2012-08-07 15:50] Running 'pacman -Syyu'
[2012-08-07 15:50] synchronizing package lists
[2012-08-07 15:50] starting full system upgrade
[2012-08-07 15:50] upgraded libwbclient (3.6.6-1 -> 3.6.7-1)
[2012-08-07 15:51] upgraded smbclient (3.6.6-1 -> 3.6.7-1)
[2012-08-07 15:51] Running 'pacman -Sy'
[2012-08-07 15:51] synchronizing package lists
[2012-08-07 15:51] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.77j/rutorrent-plugins-3.4-3-any.pkg.tar.xz'
[2012-08-07 15:51] upgraded rutorrent-plugins (3.4-2 -> 3.4-3)
[2012-08-07 15:51] Running 'pacman -Sy'
[2012-08-07 15:51] synchronizing package lists
[2012-08-07 16:02] Running 'pacman-color -S crontab'
[2012-08-07 16:02] Running 'pacman-color -S cronjob'
[2012-08-07 16:02] Running 'pacman-color -S cron'
[2012-08-07 16:02] upgraded cronie (1.4.8-2 -> 1.4.8-2)
[2012-08-07 16:04] Running 'pacman-color -S cronie'
[2012-08-07 16:05] Running 'pacman-color -S esmtp procmail'
[2012-08-07 16:05] installed libesmtp (1.0.6-2)
[2012-08-07 16:05] installed esmtp (1.2-4)
[2012-08-07 16:05] installed procmail (3.22-5)
[2012-08-08 12:10] Running 'pacman -Sy'
[2012-08-08 12:10] synchronizing package lists
[2012-08-08 12:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.82R/pms-1.60.0-2-x86_64.pkg.tar.xz'
[2012-08-08 12:12] upgraded pms (1.60.0-2 -> 1.60.0-2)
[2012-08-08 18:02] Running 'pacman -R pms'
[2012-08-08 18:02] removed pms (1.60.0-2)
[2012-08-08 18:02] Running 'pacman -Sy'
[2012-08-08 18:02] synchronizing package lists
[2012-08-08 18:03] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.BkP/pms-1.60.0-2-x86_64.pkg.tar.xz'
[2012-08-08 18:03] installed pms (1.60.0-2)
[2012-08-08 18:17] Running 'pacman -S extra/icedtea-web'
[2012-08-08 18:17] Running 'pacman -S extra/icedtea-web-java7'
[2012-08-08 18:18] installed icedtea-web-java7 (1.2.1-2)
[2012-08-08 18:36] Running 'pacman -R pms'
[2012-08-08 1

shadowlurker wrote:
It's problem in pam configuration files. You need to create files useradd, userdel, groupadd and groupdel in /etc/pam.d/ directory with following content:
auth sufficient pam_rootok.so
auth required pam_unix.so
account required pam_unix.so
session required pam_unix.so
password required pam_permit.so
You da man! I also had to add grpconv and chage to get filesystem working but all seems well now thanks!
Doug piston had me try something that I think will help anyone else who has this problem. Try re-installing pambase and shadow. It generated back most of any I was missing.
Last edited by shauder (2012-11-03 00:55:19)

Problem with htmldb 2 (Sorry APEX)!

I installed htmldb 2 on a windows XP, Oracle 10gR1 (which has enhanced by companion CD downloaded form Oracle's site). Everything went OK but when I want to connect to it by this url: http://localhost:7777/pls/htmldb it takes my username,pass but says:
"Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Oracle-HTTP-Server/1.3.28 Server at localhost Port 7777"
I noticed many differences between my installed Apache and documents of htmldb. I run a 9.0.4.0.0 Apache server and the dads.conf and httpd.conf are as following:
# ============================================================================
# mod_plsql DAD Configuration File
# ============================================================================
# 1. Please refer to dads.README for a description of this file
# ============================================================================
# Note: This file should typically be included in your plsql.conf file with
# the "include" directive.
# Hint: You can look at some sample DADs in the dads.README file
# ============================================================================
Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
<Location /pls/htmldb>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDatabasePassword @BI+fAonVS+7xU8G04irVINWznM6s+A9fuQ==
PlsqlDatabaseConnectString chagh
PlsqlDefaultPage htmldb
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlAuthenticationMode Basic
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
</Location>
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# After this file is processed, the server will look for and process
# E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/srm.conf and then E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "E:\oracle\product\10.1.0\Companion\Apache\Apache" will be interpreted by the
# server as "E:\oracle\product\10.1.0\Companion\Apache\Apache/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerType is either inetd, or standalone. Inetd mode is only supported on
# Unix platforms.
ServerType standalone
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do NOT add a slash at the end of the directory path.
ServerRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache"
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file will be created when you run Apache) then you must ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile logs/httpd.scoreboard
# In the standard configuration, the server will process httpd.conf (this
# file, specified by the -f command line option), srm.conf, and access.conf
# in that order. The latter two files are now distributed empty, as it is
# recommended that all directives be kept in a single file for simplicity.
# The commented-out values below are the built-in defaults. You can have the
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# SendBufferSize: controls setsockopt() call made to set send buffer size on
# all sockets. Default OS value on most Windows platforms is too small.
# Larger values can help if the average page size served by OHS is
# large (~64 k)
SendBufferSize 16384
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# Apache on Win32 always creates one child process to handle requests. If it
# dies, another child process is created automatically. Within the child
# process multiple threads handle incoming requests. The next two
# directives control the behaviour of the threads and processes.
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For Win32, set this value to zero (unlimited)
# unless advised otherwise.
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
MaxRequestsPerChild 0
# Number of concurrent threads (i.e., requests) the server will allow.
# Set this value according to the responsiveness of the server (more
# requests active at once means they're all handled more slowly) and
# the amount of system resources you'll allow the server to consume.
ThreadsPerChild 50
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
#MinSpareServers 5
#MaxSpareServers 20
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
#MaxClients 150
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#Listen 3000
#Listen 12.34.56.78:80
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#BindAddress *
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Please read the file README.DSO in the Apache 1.3 distribution for more
# details about the DSO mechanism and run `apache -l' for the list of already
# built-in (statically linked and thus always available) modules in your Apache
# binary.
# Note: The order in which modules are loaded is important. Don't change
# the order below without expert advice.
# Example:
# LoadModule foo_module libexec/mod_foo.dll
LoadModule mime_magic_module      modules/ApacheModuleMimeMagic.dll
LoadModule mime_module          modules/ApacheModuleMime.dll
LoadModule dbm_auth_module     modules/ApacheModuleAuthDBM.dll
LoadModule digest_auth_module     modules/ApacheModuleAuthDigest.dll
LoadModule anon_auth_module      modules/ApacheModuleAuthAnon.dll
LoadModule cern_meta_module      modules/ApacheModuleCERNMeta.dll
LoadModule digest_module      modules/ApacheModuleDigest.dll
LoadModule expires_module      modules/ApacheModuleExpires.dll
LoadModule headers_module      modules/ApacheModuleHeaders.dll
LoadModule proxy_module      modules/ApacheModuleProxy.dll
LoadModule speling_module      modules/ApacheModuleSpeling.dll
LoadModule status_module      modules/ApacheModuleStatus.dll
LoadModule info_module          modules/ApacheModuleInfo.dll
LoadModule usertrack_module      modules/ApacheModuleUserTrack.dll
LoadModule vhost_alias_module     modules/ApacheModuleVhostAlias.dll
LoadModule agent_log_module     modules/ApacheModuleLogAgent.dll
LoadModule referer_log_module     modules/ApacheModuleLogReferer.dll
LoadModule perl_module      modules/ApacheModulePerl.DLL
LoadModule fastcgi_module      modules/ApacheModuleFastCGI.dll
LoadModule onsint_module      modules/ApacheModuleOnsint.dll
LoadModule wchandshake_module     modules/ApacheModuleWchandshake.dll
ClearModuleList
AddModule mod_so.c
AddModule mod_onsint.c
AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_negotiation.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
AddModule mod_setenvif.c
AddModule mod_isapi.c
AddModule mod_vhost_alias.c
AddModule mod_log_referer.c
AddModule mod_log_agent.c
AddModule mod_auth_anon.c
AddModule mod_auth_dbm.c
AddModule mod_auth_digest.c
AddModule mod_cern_meta.c
AddModule mod_digest.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_proxy.c
AddModule mod_speling.c
AddModule mod_info.c
AddModule mod_status.c
AddModule mod_usertrack.c
AddModule mod_perl.c
AddModule mod_fastcgi.c
AddModule mod_wchandshake.c
<IfDefine SSL>
LoadModule ossl_module      modules/ApacheModuleOSSL.DLL
</IfDefine>
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# Port: The port to which the standalone server listens. Certain firewall
# products must be configured before Apache can listen to a specific port.
# Other running httpd servers will also interfere with this port. Disable
# all firewall, security, and other services if you encounter problems.
# To help diagnose problems use the Windows NT command NETSTAT -a
Port 7777
Listen 7777
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
ServerAdmin [email protected]
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
# machine always knows itself by this address. If you use Apache strictly for
# local testing and development, you may use 127.0.0.1 as the server name.
ServerName localhost
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs"
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs">
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
Options Indexes FollowSymLinks MultiViews
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
# Under Win32, we do not currently try to determine the home directory of
# a Windows login, so a format such as that below needs to be used. See
# the UserDir documentation for details.
<IfModule mod_userdir.c>
     UserDir "E:\oracle\product\10.1.0\Companion\Apache\Apache\users\"
</IfModule>
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.html
</IfModule>
# AccessFileName: The name of the file to look for in each directory
# for access control information.
AccessFileName .htaccess
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
UseCanonicalName On
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
<IfModule mod_mime.c>
TypesConfig conf/mime.types
</IfModule>
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# Alternate "common" format to use when fronted by webcache:
# LogFormat "%{ClientIP}i %l %u %t \"%r\" %>s %b %h" common_webcache
# When webcache is forwarding requests to OHS, %h becomes the IP of
# the originating webcache server and the real client IP is stored
# in the ClientIP header. The common_webcache format can be used
# in place of the common format when using webcache but with one
# important caveat: if clients are capable of bypassing webcache
# then it is possible to spoof the client IP by manually setting
# the ClientIP header so the %h field should be monitored in such
# an environment. Another alternative to specifying the ClientIP
# header directly in a LogFormat is to use the "UseWebCacheIp"
# directive:
# UseWebCacheIp On
# When this is specified, %h is derived internally from the ClientIP
# header and the access log format does not need to be modified.
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/access_log 43200" common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the symbols
# pound (#) and exclamation (!) followed by the path of the program that
# can execute this specific script. For a perl script, with perl.exe in
# the C:\Program Files\Perl directory, the shebang line should be:
#!c:/program files/perl/perl
# Note you mustnot_ indent the actual shebang line, and it must be the
# first line of the file. Of course, CGI processing must be enabled by
# the appropriate ScriptAlias or Options ExecCGI directives for the files
# or directory in question.
# However, Apache on Windows allows either the Unix behavior above, or can
# use the Registry to match files by extention. The command to execute
# a file of this type is retrieved from the registry by the same method as
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer View menu,
# 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
# button allows you to modify the Actions, of which Apache 1.3 attempts to
# perform the 'Open' Action, and failing that it will try the shebang line.
# This behavior is subject to change in Apache release 2.0.
# Each mechanism has it's own specific security weaknesses, from the means
# to run a program you didn't intend the website owner to invoke, and the
# best method is a matter of great debate.
# To enable the this Windows specific behavior (and therefore -disable- the
# equivilant Unix behavior), uncomment the following directive:
#ScriptInterpreterSource registry
# The directive above can be placed in individual <Directory> blocks or the
# .htaccess file, with either the 'registry' (Windows behavior) or 'script'
# (Unix behavior) option, and will override this server default option.
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
<IfModule mod_alias.c>
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/"..
Alias /jservdocs/ "E:\oracle\product\10.1.0\Companion\Apache\Jserv\docs/"
Alias /javacachedocs/ "E:\oracle\product\10.1.0\Companion\javacache\javadoc/"
Alias /icons/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\icons/"
Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
<Directory "icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<IfModule mod_perl.c>
     Alias /perl/ "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin/"
</IfModule>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin/"
# "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# End of aliases.
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
# Directives controlling the display of server-generated directory listings.
<IfModule mod_autoindex.c>
# FancyIndexing is whether you want fancy directory indexing or standard
# Note, add the option TrackModified to the IndexOptions default list only
# if all indexed directories reside on NTFS volumes. The TrackModified flag
# will report the Last-Modified date to assist caches and proxies to properly
# track directory changes, but it does not work on FAT volumes.
IndexOptions FancyIndexing
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
# If MultiViews are amongst the Options in effect, the server will
# first look for name.html and include it if found. If name.html
# doesn't exist, the server will then look for name.txt and include
# it as plaintext if found.
ReadmeName README
HeaderName HEADER
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
# End of indexing directives.
# Document types.
<IfModule mod_mime.c>
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbriviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
AddLanguage ar .ar
AddLanguage da .dk .da
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fi .fi
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage es .es_ES .es
AddLanguage he .he .iw
AddLanguage hu .hu
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage ko .ko
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt_BR .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage sk .sk
AddLanguage sv .sv
AddLanguage th .th
AddLanguage tr .tr
AddLanguage cz .cz .cs
AddLanguage ro .ro
AddLanguage ru .ru
AddLanguage zh-cn .zh_CN
AddLanguage zh-tw .zh_TW
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
<IfModule mod_negotiation.c>
LanguagePriority ar en da nl et fi fr de el it ja ko kr no pl pt pt-br ro ru ltz ca es sk sv th tr zh-cn zh-tw zh-cn
</IfModule>
# AddType allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
# For example, the PHP 3.x module (not part of the Apache distribution - see
# http://www.php.net) will typically use:
#AddType application/x-httpd-php3 .php3
#AddType application/x-httpd-php3-source .phps
# And for PHP 4.x, use:
#AddType application/x-httpd-php .php
#AddType application/x-httpd-php-source .phps
AddType application/x-tar .tgz
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
# To use CGI scripts:
#AddHandler cgi-script .cgi
# To use server-parsed HTML files
#AddType text/html .shtml
#AddHandler server-parsed .shtml
AddType text/xml xbl
AddType text/x-component htc
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#AddHandler send-as-is asis
# If you wish to use server-parsed imagemap files, use
#AddHandler imap-file map
# To enable type maps, you might want to use
#AddHandler type-map var
</IfModule>
# End of document types.
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#MetaDir .web
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#MetaSuffix .meta
# Customizable error response (Apache style)
# these come in three flavors
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the single leading (") marks it as text, it does not get output
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using server-side-includes.
# 3) external redirects
#ErrorDocument 402 http://some.other_server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will not be available to such a script.
# Customize behaviour based on the browser
<IfModule mod_setenvif.c>
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
# End of browser customization directives
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
#</Location>
# There have been reports of people trying to abuse an old bug from pre-1.1
# days. This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org. Or, you can record them yourself, using the script
# support/phf_abuse_log.cgi.
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
# ProxyRequests On
# <Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
# </Directory>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
# ProxyVia On
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
# CacheRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\proxy"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a_domain.com another_domain.edu joes.garage_sale.com
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# Use name-based virtual hosting.
#NameVirtualHost *
#NameVirtualHost 12.34.56.78:80
#NameVirtualHost 12.34.56.78
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#<VirtualHost *>
# ServerAdmin [email protected]
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
#<VirtualHost default:*>
#</VirtualHost>
SetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
<IfModule mod_perl.c>
# Perl Directives
# PerlWarn On
# PerlFreshRestart On
# PerlSetEnv PERL5OPT Tw
# PerlSetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
PerlModule Apache
# PerlModule Apache::Status
PerlModule Apache::Registry
# PerlModule Apache::CGI
# PerlModule Apache::DBI
# PerlRequire
<Location /perl>
SetHandler perl-script
PerlHandler Apache::Registry
AddHandler perl-script .pl
Options +ExecCGI
PerlSendHeader On
</Location>
# <Location /perl-status>
# SetHandler perl-script
# PerlHandler Apache::Status
# order deny,allow
# deny from all
# allow from localhost
# </Location>
</IfModule>
#Protect WEB-INF directory
<DirectoryMatch /WEB-INF/>
Order deny,allow
Deny from all
</DirectoryMatch>
# Setup of FastCGI module
<IfModule mod_fastcgi.c>
Alias /fastcgi/ "E:\oracle\product\10.1.0\Companion\Apache\fastcgi/"
ScriptAlias /fcgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin/"
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin">
     AllowOverride None
     Options None
     Order allow,deny
     Allow from all
     SetHandler fastcgi-script
     <IfModule mod_ossl.c>
     SSLOptions +StdEnvVars
     </IfModule>
</Directory>
</IfModule>
# Include the configuration for Apache JServ 1.1
#include "E:\oracle\product\10.1.0\Companion\Apache\Jserv\conf\jserv.conf"
# Setup of oprocmgr module.
# This directive identifies each remote apache instance that will be
# sending requests to processes (e.g., JServs), managed by local Apache
# instances. This directive is used by the local process manager to share
# routing information with remote apache instances via non-SSL HTTP messages.
# The directive is repeated for each remote apache instance that will be
# sending requests. The ProcNode directive that refers to the local apache
# instance will be ignored, but may be supplied to facilitate uniformity
# in configuration across apache instances. Arguments to the ProcNode must
# be sufficient to reach the remote instance of apache via non-SSL HTTP
# messages. It is not considered an error if the remote apache instance is
# unreachable, as no assumption is made about the starting order or
# availability of apache instances.
# Syntax: ProcNode <hostname> <port>
# Example: ProcNode abc.com 7777
<IfModule mod_oprocmgr.c>
<Location /oprocmgr-service>
SetHandler oprocmgr-service
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
<Location /oprocmgr-status>
SetHandler oprocmgr-status
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
</IfModule>
# Include the mod_oc4j configuration file
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_oc4j.conf"
# Include the mod_dms configuration file
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\dms.conf"
# Loading rewrite_module here so it loads before mod_oc4j
LoadModule rewrite_module      modules/ApacheModuleRewrite.dll
# Include the SSL definitions and Virtual Host container
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\ssl.conf"
# Include the mod_osso configuration file
#include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_osso.conf"
# Include the Oracle configuration file for custom settings
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\oracle_apache.conf"
------------------------------------------------------------------------------------------------------------------

Firstly, there's no such thing as Apache 9.3, there's Apache 1 (and subversions) and Apache 2 (and subversions). Your error message -
Oracle-HTTP-Server/1.3.28Shows you're using Apache 1.3.28
Secondly, I'm confused by your comment -
I do not have Apache 9.3 or higher but I think oracle should offer this in its companion CDOracle does offer the Apache server, if you're saying you didn't get it from Oracle then where did your Apache server come from?
Thirdly, I notice from your config file -
ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"That you're piping the logs through rotatelogs, are you sure the logfiles haven't just been renamed?

Problem with Configuring Tomcat for running jsp web applications..Plz HELP

I am using Tomcat 5.5 and Jdk 1.5.0_12 and Oracle 10g. I am using jdbc-odbc bridge connection
to connect to the database. I have placed my project folder called
tdm under the webapps folder in Tomcat. This 'tdm' folder consists of
a collection of html pages,jsp pages and images of my project. Also I created a
WEB-INF folderand in that I have lib folder which contains catalina-root.jar
, classes12.jar and nls_charset.jar files. And also in the WEB-INF folder I have the web.xml
file which looks like this
<?xml version="1.0" encoding="ISO-8859-1"?>

<web-app>
<resource-ref>
<description>Oracle Datasource example</description>
<res-ref-name>jdbc/gdn</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
My Server.xml file in Tomcat\conf folder is as follows



<Server port="8005" shutdown="SHUTDOWN">

<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />

<GlobalNamingResources>

<Environment name="simpleValue" type="java.lang.Integer" value="30"/>

<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
<Resource name="jdbc/gdn" auth="Container"
type="javax.sql.DataSource" driverClassName="sun.jdbc.odbc.JdbcOdbcDriver"
url="jdbc:odbc:gdn"
username="system" password="tiger" maxActive="20" maxIdle="10"
maxWait="-1"/>
</GlobalNamingResources>


<Service name="Catalina">


<Connector
port="5050" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true" />

     



<Connector port="8009"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />






<Engine name="Catalina" defaultHost="localhost">




<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>







<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">









<Context path="/tdm" docBase="tdm" debug="0" reloadable="true" />
</Host>
</Engine>
</Service>
</Server>
I have set the context path to /tdm in the server.xml file. Should this be placed in context.xml?
My first page in the project is called Homepage.html. To start my project I give http://localhost:5050/tdm/homepage.html
in a browser. Here I accept a username and password from the user and then do the validation in
a valid.jsp file, where I connect to the database and check and use jsp:forward to go to next pages
accordingly. However when I enter the username and password and click Go in the homepage, nothing is
displayed on the next page. The URL in the browser says valid.jsp but a blank screen appears.
WHY DOES IT HAPPEN SO? DOES IT MEAN THAT TOMCAT IS NOT RECOGNIZING JAVA IN MY SYSTEM OR IS IT A PROBLEM
WITH THE DATABASE CONNECTION OR SOMETHING ELSE? I FEEL THAT TOMCAT IS NOT EXECUTING JSP COMMANDS?
IS IT POSSIBLE?WHY WILL THIS HAPPEN?
I set the JAVA_HOME and CATALINA_HOME environment to the jdk and tomcat folders resp.
Is there any other thing that I need to set in classpath? Should I have my project as a
WAR file in the webapps of TOMCAT or just a folder i.e. directory structure will fine?

I am using Tomcat 5.5 and Jdk 1.5.0_12 and Oracle 10g. I am using jdbc-odbc bridge connection
to connect to the database. I have placed my project folder called
tdm under the webapps folder in Tomcat. This 'tdm' folder consists of
a collection of html pages,jsp pages and images of my project. Also I created a
WEB-INF folderand in that I have lib folder which contains catalina-root.jar
, classes12.jar and nls_charset.jar files. And also in the WEB-INF folder I have the web.xml
file which looks like this
<?xml version="1.0" encoding="ISO-8859-1"?>

<web-app>
<resource-ref>
<description>Oracle Datasource example</description>
<res-ref-name>jdbc/gdn</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
My Server.xml file in Tomcat\conf folder is as follows



<Server port="8005" shutdown="SHUTDOWN">

<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />

<GlobalNamingResources>

<Environment name="simpleValue" type="java.lang.Integer" value="30"/>

<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
<Resource name="jdbc/gdn" auth="Container"
type="javax.sql.DataSource" driverClassName="sun.jdbc.odbc.JdbcOdbcDriver"
url="jdbc:odbc:gdn"
username="system" password="tiger" maxActive="20" maxIdle="10"
maxWait="-1"/>
</GlobalNamingResources>


<Service name="Catalina">


<Connector
port="5050" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true" />

     



<Connector port="8009"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />






<Engine name="Catalina" defaultHost="localhost">




<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>







<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">









<Context path="/tdm" docBase="tdm" debug="0" reloadable="true" />
</Host>
</Engine>
</Service>
</Server>
I have set the context path to /tdm in the server.xml file. Should this be placed in context.xml?
My first page in the project is called Homepage.html. To start my project I give http://localhost:5050/tdm/homepage.html
in a browser. Here I accept a username and password from the user and then do the validation in
a valid.jsp file, where I connect to the database and check and use jsp:forward to go to next pages
accordingly. However when I enter the username and password and click Go in the homepage, nothing is
displayed on the next page. The URL in the browser says valid.jsp but a blank screen appears.
WHY DOES IT HAPPEN SO? DOES IT MEAN THAT TOMCAT IS NOT RECOGNIZING JAVA IN MY SYSTEM OR IS IT A PROBLEM
WITH THE DATABASE CONNECTION OR SOMETHING ELSE? I FEEL THAT TOMCAT IS NOT EXECUTING JSP COMMANDS?
IS IT POSSIBLE?WHY WILL THIS HAPPEN?
I set the JAVA_HOME and CATALINA_HOME environment to the jdk and tomcat folders resp.
Is there any other thing that I need to set in classpath? Should I have my project as a
WAR file in the webapps of TOMCAT or just a folder i.e. directory structure will fine?

Problem with WebLogic 10.3.3, Apache 2.2.3 and WebLogic Apache proxy plugin

I have a problem with using Apache 2.2.3 as a WebLogic SSL proxy. I have Apache 2.2 running and successfully configured an SSL cert, config in ssl.conf is...
<VirtualHost secure.daftdonkey.com>
# Setup SSL for secure.daftdonkey.com
ServerName secure.daftdonkey.com
SSLEngine On
SSLCertificateFile /oracle/secure/secure.daftdonkey.com.crt
SSLCertificateKeyFile /oracle/secure/secure.daftdonkey.com.key
SSLCertificateChainFile /oracle/secure/gd_bundle.crt
</VirtualHost>
This works fine
Now I want Apache to proxy requests to my WebLogic Server and secure them over SSL as well
e.g. a request to https://secure.daftdonkey.com/service goes to https://weblogic.internal.site/service
I have downloaded and configured the weblogic module and tested it handling traffic for HTTP and that worked, then I switched the WebLogic module to use SSL.
LoadModule weblogic_module modules/mod_wl.so
<IfModule mod_weblogic.c>
WebLogicHost weblogic.internal.site
WebLogicPort 16101
Debug ALL
SecureProxy ON
WLSSLWallet /oracle/secure/my-wallet
WLLogFile /tmp/wl-proxy.log
</IfModule>
<Location /service>
SetHandler weblogic-handler
</Location>
Starting Apache throws the error. I think this is my main problem, i've searched support.oracle.com and not found anything.
[Mon Jun 07 23:00:48 2010] [crit] (20014)Internal error: WL SSL Init failed for server: (null) on 0
but Apache starts... I get this error when I make a request to https://secure.daftdonkey.com/service
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
Looking into the log /tmp/wl-proxy.log I see....
Mon Jun 7 22:30:10 2010 <393212759749971> URLfactory Created
Mon Jun 7 22:30:10 2010 <393312759750102> ================New Request: [GET /service HTTP/1.1] =================
Mon Jun 7 22:30:10 2010 <393312759750102> INFO: SSL is configured
Mon Jun 7 22:30:10 2010 <393312759750102> Using Uri /service
Mon Jun 7 22:30:10 2010 <393312759750102> After trimming path: '/service'
Mon Jun 7 22:30:10 2010 <393312759750102> The final request string is '/service'
Mon Jun 7 22:30:10 2010 <393312759750102> parseServerList: Socket Address hostnames 'weblogic.internal.site:16101'
Mon Jun 7 22:30:10 2010 <393312759750102> Host extracted from serverlist is [weblogic.internal.site]
Mon Jun 7 22:30:10 2010 <393312759750102> parseServerList: IP from socket Address [192.168.100.15]
Mon Jun 7 22:30:10 2010 <393312759750102> Initializing lastIndex=0 for a list of length=1
Mon Jun 7 22:30:10 2010 <393312759750102> getListNode: created a new server node: id='weblogic.internal.site:16101' server_name='secure.daftdonkey.com', port='443'
Mon Jun 7 22:30:10 2010 <393312759750102> attempt #0 out of a max of 5
Mon Jun 7 22:30:10 2010 <393312759750102> Trying a pooled connection for '192.168.100.15/16101/16101'
Mon Jun 7 22:30:10 2010 <393312759750102> getPooledConn: found a host and port/securePort match
Mon Jun 7 22:30:10 2010 <393312759750102> getPooledConn: No more connections in the pool for Host[192.168.100.15] Port[16101] SecurePort[16101]
Mon Jun 7 22:30:10 2010 <393312759750102> general list: trying connect to '192.168.100.15'/16101/16101 at line 3188 for '/service'
Mon Jun 7 22:30:10 2010 <393312759750102> SSL is not configured for this connection
Mon Jun 7 22:30:10 2010 <393312759750102> Local Port of the socket is 45580
Mon Jun 7 22:30:10 2010 <393312759750102> Remote Host 192.168.100.15 Remote Port 16101
Mon Jun 7 22:30:10 2010 <393312759750102> URL::connect SSLConn for reader is not set as it is NULL
Mon Jun 7 22:30:10 2010 <393312759750102> general list: created a new connection to '192.168.100.15'/16101 for '/service', Local port:0
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Host]=[secure.daftdonkey.com]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[User-Agent]=[Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox/3.5.9 ( .NET CLR 3.5.30729)]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Accept-Language]=[en-us,en;q=0.5]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Accept-Encoding]=[gzip,deflate]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.7]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Keep-Alive]=[300]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Connection]=[keep-alive]
Mon Jun 7 22:30:10 2010 <393312759750102> parse_header is done
Mon Jun 7 22:30:10 2010 <393312759750102> Method is GET
Mon Jun 7 22:30:10 2010 <393312759750102> About to call parseHeaders
Mon Jun 7 22:30:10 2010 <393312759750102> URL::parseHeaders: Value of parsedHeaders = [0]
Mon Jun 7 22:30:10 2010 <393312759750102> URL::sendHeaders(): meth='GET' file='/service' protocol='HTTP/1.1'
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Host]=[secure.daftdonkey.com]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [User-Agent]=[Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox/3.5.9 ( .NET CLR 3.5.30729)]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Accept-Language]=[en-us,en;q=0.5]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Accept-Encoding]=[gzip,deflate]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.7]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Keep-Alive]=[300]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Connection]=[Keep-Alive]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [WL-Proxy-SSL]=[true]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [WL-Proxy-Client-IP]=[192.168.100.245]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Proxy-Client-IP]=[192.168.100.245]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [X-Forwarded-For]=[192.168.100.245]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [X-WebLogic-KeepAliveSecs]=[30]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [X-WebLogic-Force-JVMID]=[unset]
Mon Jun 7 22:30:10 2010 <393312759750102> Reader::fill(): first=0 last=0 toRead=4096
Mon Jun 7 22:30:10 2010 <393312759750102> Reader::fill(): sysRecv returned -1
Mon Jun 7 22:30:10 2010 <393312759750102> *******Exception type [READ_ERROR_FROM_SERVER] (socket read failure) raised at line 251 of ../nsapi/Reader.cpp
Mon Jun 7 22:30:10 2010 <393312759750102> caught exception in readStatus: READ_ERROR_FROM_SERVER [os error=104, line 251 of ../nsapi/Reader.cpp]: socket read failure at line 963
Mon Jun 7 22:30:10 2010 <393312759750102> PROTOCOL_ERROR: Backend Server not responding - isRecycled:0
Mon Jun 7 22:30:10 2010 <393312759750102> Marking 192.168.100.15:16101 as bad
Mon Jun 7 22:30:10 2010 <393312759750102> got exception in sendRequest phase: Backend Server not responding at line 3702
Mon Jun 7 22:30:10 2010 <393312759750102> Failing over after sendRequest() exception: PROTOCOL_ERROR as Idempotent is set to ON
Mon Jun 7 22:30:10 2010 <393312759750102> attempt #1 out of a max of 5
However connecting directly to https://192.168.100.15:16101/irm_rights is successful.
Ouput from orapki seems to show a valid wallet.
[root@content my-wallet]# /oracle/install/bin/orapki wallet display -wallet /oracle/secure/my-wallet/
Oracle PKI Tool : Version 11.1.1.2.0
Copyright (c) 2004, 2009, Oracle and/or its affiliates. All rights reserved.
Requested Certificates:
User Certificates:
Trusted Certificates:
Subject: OU=Class 2 Public Primary Certification Authority,O=VeriSign\, Inc.,C=US
Subject: OU=Secure Server Certification Authority,O=RSA Data Security\, Inc.,C=US
Subject: OU=Class 3 Public Primary Certification Authority,O=VeriSign\, Inc.,C=US
Subject: OU=Class 1 Public Primary Certification Authority,O=VeriSign\, Inc.,C=US
Subject: CN=weblogic.internal.site,OU=FOR TESTING ONLY,O=MyOrganization,L=MyTown,ST=MyState,C=US
Subject: CN=GTE CyberTrust Global Root,OU=GTE CyberTrust Solutions\, Inc.,O=GTE Corporation,C=US
Also the apache log at /var/log/httpd/ssl_error_log shows.
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
Editing the httpd.conf and sending traffic from Apache to WebLogic over regular HTTP works, config is...
LoadModule weblogic_module modules/mod_wl.so
<IfModule mod_weblogic.c>
WebLogicHost weblogic.internal.site
WebLogicPort 16100
Debug ALL
# SecureProxy ON
# WLSSLWallet /oracle/secure/my-wallet
WLLogFile /tmp/wl-proxy.log
</IfModule>
Resulting detail from /tmp/wl-proxy.log
Mon Jun 7 23:20:50 2010 <415912759780351> URLfactory Created
Mon Jun 7 23:20:50 2010 <416012759780502> ================New Request: [GET /service/ HTTP/1.1] =================
Mon Jun 7 23:20:50 2010 <416012759780502> Using Uri /service/
Mon Jun 7 23:20:50 2010 <416012759780502> After trimming path: '/service/'
Mon Jun 7 23:20:50 2010 <416012759780502> The final request string is '/service/'
Mon Jun 7 23:20:50 2010 <416012759780502> parseServerList: Socket Address hostnames 'weblogic.internal.site:16100'
Mon Jun 7 23:20:50 2010 <416012759780502> Host extracted from serverlist is [weblogic.internal.site]
Mon Jun 7 23:20:50 2010 <416012759780502> parseServerList: IP from socket Address [192.168.100.15]
Mon Jun 7 23:20:50 2010 <416012759780502> Initializing lastIndex=0 for a list of length=1
Mon Jun 7 23:20:50 2010 <416012759780502> getListNode: created a new server node: id='weblogic.internal.site:16100' server_name='secure.daftdonkey.com', port='443'
Mon Jun 7 23:20:50 2010 <416012759780502> attempt #0 out of a max of 5
Mon Jun 7 23:20:50 2010 <416012759780502> Trying a pooled connection for '192.168.100.15/16100/16100'
Mon Jun 7 23:20:50 2010 <416012759780502> getPooledConn: found a host and port/securePort match
Mon Jun 7 23:20:50 2010 <416012759780502> getPooledConn: No more connections in the pool for Host[192.168.100.15] Port[16100] SecurePort[16100]
Mon Jun 7 23:20:50 2010 <416012759780502> general list: trying connect to '192.168.100.15'/16100/16100 at line 3188 for '/service/'
Mon Jun 7 23:20:50 2010 <416012759780502> SSL is not configured for this connection
Mon Jun 7 23:20:50 2010 <416012759780502> Local Port of the socket is 56647
Mon Jun 7 23:20:50 2010 <416012759780502> Remote Host 192.168.100.15 Remote Port 16100
Mon Jun 7 23:20:50 2010 <416012759780502> URL::connect SSLConn for reader is not set as it is NULL
Mon Jun 7 23:20:50 2010 <416012759780502> general list: created a new connection to '192.168.100.15'/16100 for '/service/', Local port:0
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Host]=[secure.daftdonkey.com]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[User-Agent]=[Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox/3.5.9 ( .NET CLR 3.5.30729)]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Accept-Language]=[en-us,en;q=0.5]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Accept-Encoding]=[gzip,deflate]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.7]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Keep-Alive]=[300]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Connection]=[keep-alive]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Cookie]=[JSESSIONID=YF4nMNfZ3lJ5ZrVV9HGpKwj3hf12yRvlf4zksQf6pkKx2LhJ2ywY!34167467]
Mon Jun 7 23:20:50 2010 <416012759780502> parse_header is done
Mon Jun 7 23:20:50 2010 <416012759780502> Method is GET
Mon Jun 7 23:20:50 2010 <416012759780502> About to call parseHeaders
Mon Jun 7 23:20:50 2010 <416012759780502> URL::parseHeaders: Value of parsedHeaders = [0]
Mon Jun 7 23:20:50 2010 <416012759780502> URL::sendHeaders(): meth='GET' file='/service/' protocol='HTTP/1.1'
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Host]=[secure.daftdonkey.com]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [User-Agent]=[Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox/3.5.9 ( .NET CLR 3.5.30729)]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Accept-Language]=[en-us,en;q=0.5]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Accept-Encoding]=[gzip,deflate]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.7]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Keep-Alive]=[300]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Cookie]=[JSESSIONID=YF4nMNfZ3lJ5ZrVV9HGpKwj3hf12yRvlf4zksQf6pkKx2LhJ2ywY!34167467]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Connection]=[Keep-Alive]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [WL-Proxy-SSL]=[true]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [WL-Proxy-Client-IP]=[192.168.100.245]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Proxy-Client-IP]=[192.168.100.245]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [X-Forwarded-For]=[192.168.100.245]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [X-WebLogic-KeepAliveSecs]=[30]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [X-WebLogic-Force-JVMID]=[unset]
Mon Jun 7 23:20:50 2010 <416012759780502> Reader::fill(): first=0 last=0 toRead=4096
Mon Jun 7 23:20:50 2010 <416012759780502> Reader::fill(): sysRecv returned 568
Mon Jun 7 23:20:50 2010 <416012759780502> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 302 Moved Temporarily]
Mon Jun 7 23:20:50 2010 <416012759780502> URL::parseHeaders: StatusLine set to [302 Moved Temporarily]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[Date]=[Tue, 08 Jun 2010 06:20:50 GMT]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[Transfer-Encoding]=[chunked]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[Location]=[https://secure.daftdonkey.com/service/faces/LoginPage.jspx]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[X-WebLogic-JVMID]=[34167467]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[X-Powered-By]=[Servlet/2.5 JSP/2.1]
Mon Jun 7 23:20:50 2010 <416012759780502> parsed all headers OK
Mon Jun 7 23:20:50 2010 <416012759780502> done with sendRequest
Mon Jun 7 23:20:50 2010 <416012759780502> sendResponse() : r->status = '302'
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to client (add):[Date]=[Tue, 08 Jun 2010 06:20:50 GMT]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to client (add):[Location]=[https://secure.daftdonkey.com/service/faces/LoginPage.jspx]
Mon Jun 7 23:20:50 2010 <416012759780502> for 192.168.100.15/16100/16100, updated JVMID: 34167467
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to client (add):[X-Powered-By]=[Servlet/2.5 JSP/2.1]
Mon Jun 7 23:20:50 2010 <416012759780502> calling closeConn() with non-null URL* at 3826
Mon Jun 7 23:20:50 2010 <416012759780502> canRecycle: conn=1 status=302 isKA=1 clen=-1 isCTE=1
Mon Jun 7 23:20:50 2010 <416012759780502> closeConn: pooling for '192.168.100.15/16100'
Mon Jun 7 23:20:50 2010 <416012759780502> closeConn: pooling '0'
Mon Jun 7 23:20:50 2010 <416012759780502> request [irm_rights/] processed successfully..................
Mon Jun 7 23:20:50 2010 <415912759780351> Cleaning up the list node 'weblogic.internal.site:16100'list Length '1'

I found the answer to this. The documentation is not clear enough, LD_LIBRARY_PATH MUST be set and MUST have a pointer to the directory where the SSL .so modules are. I wrote up a blog article explaining the configuration and detailed this issue.
http://blogs.oracle.com/irm/2010/06/quick_guide_to_oracle_irm_11g_1.html

No TV sound - Problem with Pulseaudio and Gnome

Hi Community!
Since January 2013 I got big problems with the sound of my tvcard. The card is a Sundtek Media TV Pro. But after all the problems have nothing to to with the card itself!
So far I found out, that the problem is with Pulseaudio.
- Sound works under Windows on same PC.
- Sound don't work under Arch - not with tvtime, not with vlc, etc.
- Problem occurs even on a new installed system with the Arch-2013-02-01 install medium.
cat /etc/mediasrv.log
[1033] Pulseaudio connect reported an error (6 - Connection refused)
[1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
After setting up a new Arch installation with just xorg-server, gnome, tvtime and the sundtek driver from AUR I run journalctl -b:
Feb 10 16:25:15 hightower pulseaudio[636]: [pulseaudio] pid.c:
Daemon already running.
With sudo journalctl | grep 'Feb 10 16:2' I get the following output:
Feb 10 16:25:01 hightower rtkit-daemon[489]: Successfully made thread 488 of process 488 (/usr/bin/pulseaudio) owned by '120' high priority at nice level -11.
Feb 10 16:25:14 hightower rtkit-daemon[489]: Successfully made thread 606 of process 606 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Feb 10 16:25:15 hightower rtkit-daemon[489]: Successfully made thread 636 of process 636 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Feb 10 16:25:15 hightower pulseaudio[636]: [pulseaudio] pid.c: Daemon already running.
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module-jackdbus-detect.c: Unable to contact D-Bus session bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module.c: Failed to load module "module-jackdbus-detect" (argument:""): initialization failed.
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] socket-server.c: bind(): Die Adresse wird bereits verwendet
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module.c: Failed to load module "module-esound-protocol-unix" (argument: ""): initialization failed.
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Module load failed.
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Module load failed.
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Konnte Daemon nicht initialisieren.
Feb 10 16:28:55 hightower pulseaudio[997]: [pulseaudio] main.c: Start des Daemons fehlgeschlagen.
So, if I understand right, pulseaudio is alreade started by the rtkit-daemon and gnome couldn't start it again.
At https://bugs.archlinux.org/task/30926 I found a hint concerning /etc/xdg/autostart/pulseaudio.desktop and /etc/xdg/autostart/pulseaudio-kde.desktop.
After removing them from /etc/xdg/autostart and running journalctl -b there are no more errors.
With sudo journalctl | grep 'pulseaudio' I get:
sudo journalctl | grep 'Feb 10 17:4' | grep 'pulse*'
Feb 10 17:41:42 hightower rtkit-daemon[485]: Successfully made thread 484 of process 484 (/usr/bin/pulseaudio) owned by '120' high priority at nice level -11.
Feb 10 17:41:55 hightower rtkit-daemon[485]: Successfully made thread 625 of process 625 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
In my opinion all looks ok! I also checked the channels with the alsamixer and it looks good, too.
So I ran vlc v4l2://:dev=/dev/video0:width=720:height=576:tuner-frequency=510750:adev=/dev/null:standard=255 - but still no sound.
With cat /var/log/mediasrv.log I checked the drivers logfile:
2013-02-10 17:48:55 [343] SETTING DVB-C
2013-02-10 17:48:55 [343] switching to analog TV
2013-02-10 17:48:56 [343] SETTING PAL/SECAM
2013-02-10 17:48:58 [343] invalid audio input selected: 2
2013-02-10 17:48:58 [343] Setting frequency: 510750000
2013-02-10 17:48:58 [343] Using settings for Europe
2013-02-10 17:48:58 [343] Set Pixelformat: 0 YUV 4:2:2 (YUYV)
2013-02-10 17:48:58 [1033] Starting audio processor (PID 1033)
2013-02-10 17:48:58 [1033] initializing audio in audio processor
2013-02-10 17:48:58 [1033] loaded local pulseaudio driver
2013-02-10 17:48:58 [1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
2013-02-10 17:48:59 [1033] Pulseaudio connect reported an error (6 - Connection refused)
2013-02-10 17:48:59 [1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
2013-02-10 17:48:59 [1033] Pulseaudio connect reported an error (6 - Connection refused)
I started tvtime again. This time I ran rm -rf ~/.config/pulse/ and killall pulseaudio to kill the Pulseaudio server. I instantly got a loud noise out of my speakers.
I closed tvtime and re-opened it. And there it was: TV SOUND OUT OF MY SPEAKERS!
But now, when I run pavucontrol I get:
Connection to PulseAudio failed. Automatic retry in 5s.
In this cas this is likely because PULSE_SERVER in the Environment/X11 root Windows Properties or default-server in client.conf is misconfigured.
This situation can also arrise when PulseAudio crashed and left stale details in the X11 Root Windows.
If this is the case, then PuseAudio should autospawn again, or if this is not configured you sould run start-pulseaudio-x11 manually.
I got the information from Sundtek, that Pulseaudio should not be started as system service. Instead, every user should have an own Pulseaudio daemon and that PA was concepted this way. But they don't know how it is implemented in ArchLinux.
I also don't know it exactly. So the question to all you ArchLinu pro's:
How is PA implemented in Arch? And how can I sustainable solve my problem?
Thank you for your time and help!
Durag

There is just one more thing I found out.
After logging into Gnome and running ps aux | grep pulse I get:
rebel 727 0.7 0.2 444316 10288 ? S<l 03:02 0:00 /usr/bin/pulseaudio --start --log-target=syslog
rebel 731 0.0 0.0 71236 2652 ? S 03:02 0:00 /usr/lib/pulse/gconf-helper
rebel 843 0.0 0.0 17396 1184 pts/0 D+ 03:03 0:00 grep pulse
To get the sound to work I run:
rm -rf .config/pulse/
killall pulseaudio
killall -9 pulseaudio
I again run ps aux | grep pulse
rebel 4016 4.2 0.2 510124 11528 ? Sl 03:06 0:02 /usr/bin/pulseaudio --start --log-target=syslog
rebel 4020 0.0 0.0 71368 2700 ? S 03:06 0:00 /usr/lib/pulse/gconf-helper
rebel 4046 0.0 0.0 19456 1216 pts/0 R+ 03:07 0:00 grep pulse
I can recognize that the STATs have changed. Maybe this can help to solve the problem?

Problem with radius and wep/wpa

Hi
I have problem with wrv200 (1.0.38) +freeradius (2.0.5) +wpc54g v3.1 with wxp with patch to use wpa/wpa2
I think that authentication in my radius pass correct but there is some problem with wpa mode or wpa compatibility
In my wrv200 I try mode: wpa-enterprise, wpa2-enterprise, wpa2 enterpise-mix and radius. In my wirless card a try: wpa and wpa2 my
freeradius.conf:
andy Auth-Type := Accept, User-Password == "andy"
and log from radius:
rad_check_password: Auth-Type = Accept, accepting the user Login OK: [andy] (from client wrv200 port 0 cli 00-18-F8-aa-aa-aa)
Sending Access-Accept of id 4 to 10.0.0.6 port 1026
my wrv200 still send to syslog:
klogd: @ = Add Host : [00:18:f8:aa:aa:aa] VID 9 LinkID 1 PortNumber 6 klogd: @ = Add Host : [00:18:f8:aa:aa:aa] VID 9 LinkID 1 PortNumber 6
klogd: @ = Add Host : [00:18:f8:aa:aa:aa] VID 9 LinkID 1 PortNumber 6
and i never connect to network and i must still (every 30s) type login and password to authenticate When i use only wep, without radius,it's works
I have dwl900ap+ from dlink and when I use radius + wep 64bit everything works
i don't have any idea
thanks for any help
popo

Hey try disabling the security & try connecting to the network if it works fine, if not i mean if you want to connect using the secured network then would suggest you to upgrade the firmware of the router & keep on holding tightly
the reset button in such a way that power light is blinking on the
router & then do a complete network power cycle i.e., unplug the power
cables from the modem & from the router & then plug in the power cable
to the modem first once all the lights are solid green you could plug
in the power cable to the router & check out it will definately work!!

Problems with sytax in srcpac.conf

Similar Messages

Maybe you are looking for