Problems with text messages and internet access

I have an Apple 5c and over the last few weeks my text messages to most people had not been completing the send. Now, in addition, I am not receiving most messages and I can't access the internet for most apps (like maps, yahoo search, youtube). Is anyone else having this problem? Does anyone have any suggestions as to why this is happening and how to go about fixing it?

Try removing then reinserting the SIM card -
SIM Card Inserting Removing Apple iPhone 5 | Verizon Wireless
It may just need a refresh to reconnect to the network again.

Similar Messages

  • I have two Iphones with different email addresses sharing one Apple ID. Will that cause problems with using messaging and FaceTime?

    I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
    I would like to set up a new Apple Id for one of the phones and remove it from the old account.
    If I do that, can I move all of the purchased apps and songs to the new Apple account?
    Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?

    Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address).  While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
    Rather than do all that, don't fight it -- use separate IDs for iCloud.  You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account.

  • Problem sending text messages and imessages

    Hi,
    I have been having some problems with my iphone 5 when sending and receiving text messages and imessages. When i go to send a text or imessage it will take a long time for the message to try to send through, then it comes up with message failure. I have full reception and internet connection and the phone is runing on the lastest ios7.1.2, everything is working in that respect. Sometimes it will freeze my whole inbox and i end up having to turn my phone off and on again to unfreeze it. It has also started taking a long time to receive messages, i will get a message and it will say that it was received 30mins ago when its only just shown up on my phone. I am also having problems deleting messages, as it freezes whenever i try to delete them.
    Any suggestions on what to do?

    See if anything in this article helps: iOS: Troubleshooting Messages

  • When i try to send a picture or a video with imessage on my iphone 4, it sends it with text messages and not imessage and it takes a lot of time ! How can i fix this ? thanks :)

    Hey guys ,
    When i try to send a picture with imessage to an another iphone it's sends it with text messages (not all the times but often) and it takes a lot of time ! Who could I fix this ?
    Thanks anyway ,
    guitarist young

    For Instagram you can try and uninstall and reinstall the app and see if that fixes it. But if not you can try and resetting all settings, Settings>General>Reset>Reset All Settings.

  • Problem with Text Messages

    Hi,
    I have a 5530 XpressMusic phone with around 4000+ text messages saved on the memory card.
    Whenever the number of text messages increases above approximately 3500+ messages, the new text message alert stops appearing, no tone or vibration alerts. Even delivery reports refuse to appear. 
    Nokia PC Suite (Latest version) has a lot of trouble displaying those texts as well (So that I could backup the data) and nothing appears in Communication Center.
    I had the exact same problem with the older N70 ME and had to delete texts to get back to normal. Its going to be very cumbersome to go through all those messages and pick and prune to a size that the phone/Suite can handle.
    I have the latest firmware. Any help with this? 

    ok this isn't any help sorry,but can't find anywhere to post a new thread,so this is the closest post i've found so hopefully i can get some help here :robotmad:
       when i have "backed up" my messages from the phone to my memory card AND picked my memory card as the place where my messages are stored,i put the memory card into my pc to browse the memory card i cannot find anything on there relating to the back up or my messages,i've gone through all the folders i can see,even the empty ones(btw do i need keep the empty folders or can i delete them),now this is really "bugging" me as my little lad sent me a merry christmas text message so i wanted to do the above action so i could save the message on my pc as a keeps sake
             hope you guys can help
              thanx a lot

  • Problem with Text Messaging on new iphone with non iphone users

    Ever since I set up imessage forwarding to be able to send/receive text messages on both my mac book pro and iphone people with non iphones are not getting my text messages from either device. 
    In my settings - messages - text message forwarding it only has one device enabled which is my mac book pro.  There is an option to enable my iphone. Do I need to do that? I did try and it's asking me for a code.  If i do need to do this where on my phone do i get this code? Thank you.

    Have you tried reporting the problem to AT&T?

  • C7 - Problem with text messages - Help please!

    I have had my Nokia C7 since November and have not been able to use it! When I send a text message less than 160 characters I am charged between 2 and 3 times on my bill. The text message is being sent once and the recipient is receiving the text once. I have done everything that I have been asked by my provider from software upgrades to a brand new sim card to sending the phone off to be repaired to having a replacement but nothing works .. If I use my sim card in my old Nokia N79 then I don't have this problem. I recently tried a pay as you go sim card in the Nokia C7 and the same thing happened!
    Any suggestions please??

    Thanks for confirming .. Just so frustrating as getting no where with T Mobile. The technical person insisted that I had sent 3 text messages despite the fact that 1 was sent all because that is what was showing on his system! I had to go into the shop with a copy of my usage and the phone showing the text messages to prove only 1 text had been sent. They just don't seem to be able to resolve the issue. I just don't know what else to do. I haven't been able to use this new phone since November
    Thanks again for your reply. Much appreciated

  • HELP!  I am having trouble with text messaging and sending pictures

    I have had the handcent app for a very long time and I have never had any issues with it.  Today I downloaded an up date and it is running VERY SLOW and also will not allow me to send pics. It just kicks me out to my home screen.  I have tried uninstalling the app and reinstalling it which did not help.  I have tried uninstalling it and just using the standard messaging and it just keeps trying to load the screen to text.  I have tried restarting the phone and turning it off for a few minutes.  My notifications are not running correctly either.  The text pops up then the sound come a minute or two later.  Anyone have any ideas on what to do to resolve this issue or experiencing the same thing?
    Thanks in advance!
        Kim

    From your description it sounds like you have something hogging up all your systems resources... Try downloading System Panel and activate the monitoring option under the settings and allow it to run and see if it shows any apparently that was using extremely high resources and then try to close it or you can try using a Task Killer for a minute and close. all unused Apps and see if problem continue.
    Also you could boot into Safe Mode and see what happens.. Instruction at http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=42081

  • Problem with ExternalInterface.call and Internet Explorer

    Hi, I´m developing a site, (
    www.gen-studio.com/avelart2
    ), and I´m using a swf to display a set of thumbs that when
    clicked show an item and its description on the browser, those
    items might be images or video, everything works fine with the
    images.
    And actually it works fine with the videos too, when using
    Firefox, but when I test the page on Internet explorer it just
    doesn’t work!
    On principle let me describe how it´s supposed to work,
    a thumbnail when clicked sends an id number to javaScript using
    ExternalInterface.call(“myFunction”,myId); -I´m
    using AS3 for the swf´s-
    the javaScript file has already loaded (ever since$(
    document).ready) a XML file which uses to match the id with a file
    and the description, if the item to show it´s a video, then it
    creates a variable which holds a string with the proper html to
    embed a swf (a swf movie player that resides just next to the HTML
    file), when loaded, the swf movie player uses
    ExternalInterface.call() to ask for the source of the video that
    has to play, and that function is as follows:
    setVideo: function(){
    alert("hola");
    return comun.miVideo;
    (The alert(“hola”); is just to test that the
    function is being called), which it is, but it returns null as a
    value instead of the proper string, and this happens only on
    internet Explorer, but works correctly on Firefox.
    I´ve been reading all day about the subject and found a
    few interesting things, which though have made me narrow my
    problem, they haven´t just provided me with a solution, what I
    found so far:
    -I must have in account flash security issues: Checked (my
    actionScript follows:)
    import fl.video.*;
    import flash.external.ExternalInterface;
    flash.system.Security.allowDomain("*");
    var vid:FLVPlayback = this.miPlayer;
    vid.source =
    flash.external.ExternalInterface.call("comun.setVideo");
    -ExternalInterface and Internet explorer don´t work
    properly when tested locally: Checked (I have a server on my PC and
    I´m testing the site as well in the above direction).
    -The object tag holding the swf must have a proper id
    attribute: Checked.
    -It´s super important the way the object tag is formed:
    Checked, and I also tested the tag separately (I put it directly in
    the HTML instead of adding it via javaScript) and it worked as
    expected in both Firefox and Internet Explorer, which leads me to
    believe:
    -I read somewhere that if you add the object tag by using
    innerHTML or appendChild, returning values from javaScript to swf
    won´t work, but I couldn´t find an explanation nor a
    solution.
    Well, as I said now I´ve been looking all day for an
    answer, so I really hope you can help me or give me some advice on
    the subject, thank you so much for your time!

    Hi! it solved itself !! (nahh, I wish), but it indeed had a
    solution, it was something quite simple, and I don´t really
    understand why it was not working in the first place, but here is
    the thing:
    I´m learning jquery and this is the first proyect
    I´m officially using it, so I was using
    $('#myDIV').append("string"); to embed the swf, (and it was working
    perfectly on Firefox), so since I had narrowed my problem to those
    lines, I decided to try some good-old-fashioned-javaScript and
    changed it for: var myDiv =
    document.getElementById('thatParticularDiv'); myDiv.innerHTML =
    ('string'); and it worked both in Firefox and IE !!!!!! :)
    I´m quite happy about it, and if someone knows
    what´s the issue with my jquery approach I would love to hear
    it. THANKS !!

  • Problems with text messages due to changing to galaxy s5

    So I'm not receiving any text messages from iPhone users! I had an iPhone, and recently swapped to a galaxy s5! If anyone can help!? It will be greatly appreciated

    Hi cabs007,
    If you have recently switched away from the iPhone and are having issues receiving messages from iPhone users, you may find the following article helpful:
    iOS: Deactivating iMessage
    http://support.apple.com/kb/TS5185
    Also, if possible, you may want to see if your contacts can delete any current message conversations they are having with you to ensure that their phones recognize that you are no longer using iMessage.
    Regards,
    - Brendan

  • I can't save photos from text messages and cannot access keyboard

    does anyone know why i can't save pictures from text messages received and why i am unable to access my keyboard to type out messages?

    When you press and hold on the picture...it does not give you an option to save the image?  Also for the keyboard issue...go into settings/application manager(it may also say apps/manage apps).  At the top scroll over and select all.  Scroll down and find messaging and tap on it.  If you have an option to clear data and force stop then select them(it wont delete anything).  Once done go back in the list and see if you also have anything that says keyboard or android keyboard and do the clear data/force stop on that also.

  • Problem with text messaging

    recently activated my iphone, i can make and receive calls...and i can send text messages but I cant receive them from other carriers.
    so at&t customers can text me and I get them, but other carriers text messages never come through to my phone. i called at&t and they cant figure it out..cause I received their test message but the issue is unresolved. any thoughts?

    I've got a similar problem, except there's just a small amount of people that I don't get texts from rather than every other carrier. AT&T said they fixed it, but it's still no good...I'm probably going to go in there tomorrow.

  • Problems with mail, messags, and social network accounts

    Hi,
    first of all, sorry for my bad English.
    I would like to know if there is a maximum limit of accounts (email, social network, etc. etc.) that OS10 can handle.
    On my Passport (OS10 Version 10.3.0.675) I have the following:
    - 1 BBM
    - 1 WhatsApp
    - 1 Facebook
    - 12 Mail
    Now, when I try to insert another account (for example mail or Twitter), I recived the following error message: 
    "The maxximum accounts has been reached".
    Is that right?
    With the Z10 and the Q10, if I remember correctly, I did not have this problem.
    I need to add more email accounts, someone can help me?
    Thank you all.
    I'M NOT LAZY,
    I JUST DON'T GIVE NOTHING!

    Let me see what I can find out and I'll get back to you when I know more! Thanks
    Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
    Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog

  • Problem with text resizing and moving

    After much pain with this issue, I'm going to ask for help.
    The whole issue(s) resolves around text upsizing, changing and moving in Muse.
    No amount of grouping, layering and locking has stopped this issue for me.
    I don't have divs that are a pixel off and whatnot. This happens even when I have a blank site and I test it (as seen in the example pic below).
    The majority of the time, this is an issue when viewing Muse created sites on Android, although text does move when viewed on iOS.
    Example 1:
    I have a square div. I put text in the div that I want to stay contained in the div. Basic right?
    View site on browsers and iOS devices it generally plays by the rules (although not always, there are some movement going on). When viewing this example text and div on an android device, the text resizes larger. This results in the text overlapping the div and moving EVERYTHING below it down. This makes it impossible to tightly design anything for a website.
    I know Android has options within it for users to set text viewing size, but this worthless from a web designer standpoint. That is something I can't control.
    Example 2:
    I have 1 text field and set the typeface to 15. There is nothing else on the page, just a background image (under "Fill"). Viewed on browsers and iOS looks fine. When viewed on Android this text balloons to some enormous size (25+) that makes the website utterly useless. This random resizing makes it impossible to design to. 
    Example 2.5:
    I take that same text from example 2, copy it into 2 of the same size text fields. They are placed next to each other, taking up the same width as Example 2. It now looks like 2 columns of text. Set the typeface to 15 again. I view it on Android and get the resizing issues from example 1 not example 2. It's noting to the extent of example 2 but like example 1, it still changes enough to ruins any design I'm trying to accomplish.
    Is there any place in Muse to lock the text? I don't want to make the text into an image (obviously).
    I been dealing with this in Muse for 6 months and haven't been able to find anything online or in forums about. I understand with the bevy of platforms out there nothing will look the same across the board, but right now I don't see how I can continue working with this issue.
    Am I the only one dealing with this?
    Thank you for any assistance.

    Welcome to the annoying realities of working with text on websites... Nothing you describe is unique to Muse.
    Every browser has it's own text engine and thus each line breaks text differently. Even the exact same web page on the same computer with the same fonts will sometimes result in different line breaks in different browsers, or even in different versions of the same browser. It's just a side effect of the nature of determining a line break, where even the most miniscule difference in calculations can result in an entire word fitting, or not fitting.
    There are two "tools" that are especially important to understand and use effectively in order to create designs that work as effectively as possible with the variation in line breaks from one site viewer to the next.
    Text Frame Height Always Matters
    If a text frame is drawn to the exact height of the text wthin the frame, then any increase in the number of lines of text due to changes in line breaks will result in the text frame growing and other objects below the text frame being moved down.
    If a text frame is drawn larger than the height of the text then when line breaks change the text frame won't grow unless the changes in line breaks are severe enough to result in the flowed text being taller than the text frame was originally drawn.
    If you resize a text frame smaller than the text within the frame in Muse Design view, the frame will snap back to be large enough to accommodate the text, but a dotted horizontal line will appear within the text frame indicating the "minimum height" for the text frame. If line breaks change in the browser the text frame will grow or shrink in height down to the minimum height indicated by this dotted line.
    Careful sizing of text frames can go a long way to creating a design that will continue to work well even when line breaks, and thus text frame heights change.
    Grouping Has Consequences
    As part of the output process, Muse collections the objects you've drawn into a hierarchy of horizontal groupings, vertical groupings, or stacks. When line breaks change in different browsers and text frames change height, when the text frames are located in this output heirarchy determines what impact the change in height has on other objects (if any).
    For example, if you have a layout that looks like a 2x2 grid of text frames, by default Muse will interpret it to act as two colums. So if the first text frame gets taller it will push the text frame below it down, but won't impact the location of the two text frames in the second column.
    If that's not the behavior you want, the way to tell Muse to treat things differently would be to group the two items in the first "row". This would cause the top to to be treated as a horizontal group. If anything in the group grows taller than the group, the group resizes taller and pushes the objects below it down. Thus if the top to items are grouped, if either one of them grows taller than the group it would push both the text frames below downward.
    The 2x2 grid is just a simple example of the concept. In most cases you don't have to do anything special to get the behavior you want, but it is important to understand grouping has this ramification. Grouping an arbitrary set of objects on your page can result in undesired behavior when text frames resize in the browser.
    For the Andriod screenshot you've provided, I don't have an immediate explanation. For us to explain what's shown we need to know the exact browser, browser version, Android version and device the screenshot is for. It would also be immensely helpful to have the URL for the page, so we can attempt to reproduce what you're seeing and view the exact code involved.

  • Help with text messages and calls--urgent and annoying :-/

    Hello: I have an 8350i on the Sprint/Nextel network. Latest issues include what seems to be a dump of my text messages--yesterday received a batch at 5:38pm that had been sent at 9:49am, 10am, 11:27am, noon, 2pm, 2:15pm and then another batch last night at 9:08pm that had been sent at 7:31pm, 8:47pm, and again this morning a batch that arrived at just before 7am that had been sent about 2 hours before. And it's not all the time, or just certain messages. Very frustrating.
    Second issue is that I discoverd that neither my husband or I am able to call my office landline. Colleagues seem to have no trouble.
    Any thoughts out there? Thanks!

    Text message delays are a carrier issue, I would contact sprint and see if there was maintenance in the area or other outages.  Quick fix, you can try to pull the battery out while the device is still on and time it for 2 minutes.  This refreshes your connection and it may work properly after that.  Also, calling other numbers is a carrier issue also.

Maybe you are looking for

  • Firefox wont start or load but when I press ctl, alt, delete I see it running?

    I upgraded Firefox. I worked for one night, the next night When I tried to open it it didnt work. I press ctl alt delete and noticed that it was running in the background but no window... IE and Chrome works fine... I do have internet. I ran virus sc

  • Please, please how do I stop the email ding on ipad air IOS7?

    Please, please how do I stop the ding (not change) on email messages on iPad air IOS7

  • Sender Adapter File Content Conversion

    Hi everyone, Can someone help me out here? For some reasons, out of the fields declared, only 20 gets filled! Scenario, I've configured the file sender adapter with file content conversion.  It's picking up an fixed length ASCII file. Here are the Co

  • SAPScript : Credit Memo Page Number Display Incorrectly

    Dear Gurus, I facing some problem in my Credit Memo display for SAPScript. Previously the page setting was Page        Meaning                  NextPage  Mode     No. Type FIRST      First page                     FIRST    INC        ARABIC NEXT     

  • Booting from a CD/DVD

    Hello, I have been having a ton of trouble rebooting from a CD with my new 24" 2.4gHz iMac. How long do I press down C? Everytime I try I think it is going to go into the disc and then, bang, it brings the main screen back up. I am trying to pull dat