Problems with the "credentials to connect" on Linux

Hi!
I have installed the the FlashMediaEncoder and the
FlashMediaServer on two seperate machines. The FLashMedia Server
runs on a machine with OS: Linux Red Hat Enterprise. The
FlashMediaEncoder on a Windows XP machine.
At the Connect appears the pop-up of "credentials to connect
to FMS"....
Which password they must be inserted?
Exists a Flash Media Server Authentication Add In for Linux?
Thanks.....

As the FMS authentication Add-In is currently not available,
ideally you should not get the credential dialog box.
There can be two possible reasons for which you are getting
the credential dialog:
1. The application mentioned in the URL is not present at the
FMS. Goto [FMS install directory]/Applications and check whether
the application is present.
2. Check whether there is already some access module present
at [FMS install directory]/modules/access. If yes then removing
this can solve the problem.

Similar Messages

How can I debug a problem with the 3g data connection on my iPhone 4s?

This question didn't get any answers in the "Using iPhone" forum. Thought I would re-ask here. Note, I had to reset the network again today 2 days after the last reset:
I've been having intermittent problems with my 3g data connection on my iPhone 4s on ATT. Whenever this happens I see full bars etc, but can't browse from safari or get any data in other apps. My wife's iPhone 4 right next to me has no issues at all. Switching on/off airplane mode and turning off/on Cellular Data does not help. The only thing that helps is resetting the Network Settings or hard restarting the phone.
I figured my problems were hardware related so I took my phone in for a replacement the other day. Things started out fine but after I upgraded it to 5.01 and restored my backup and now I am back to having the same issue today. I assume the issue is with something coming from my backup / restore but is there any way for me to pinpoint what could be causing the issue. I have a lot of apps, I'd rather not have to reinstall and set them all backup manually, but I would if I knew that would fix the problem... but for all I know one of the apps could be causing it.
Anyone have any logs I can check or testing I can do on my end?
Thanks!

Unfortunately, Apple does not make any logs available to the average schmoe (like us) for networking, kernel dumps, or anything else (assuming, of course, it is not jailbroken).
Your best bet is to take it back into the store. Ask them to look at the notes in GCRM regarding the last time this occured, then explain after upgrading to 5.01 it is occuring again. Then ask them for a phone swap since it is a reoccuring issue and doesn't sound like an OS/SW issue. Good luck!

Problems with the MS Exchange connection

Hello SDN members,
I have a problem with the connection between our EP 6 SR1 and our Exchange Server 2003.
Sometimes the connection works, I get the calendar data from the Exchange Server. But mostly I get the error message:
An exception occurred while reading or writing from/to the IIS server
and the error message in the log file on the IIS is:
...../Calendar.asp |87|800a01a8|Object_required .....
If I test the connection with the SAP test program (sapexchangetest), I get no error message.
What can be the problem?
regards
Jochen

Hi,
Unfortunately looking in on this with the limited information I can only venture a few guesses as to where your problem may reside - inspecting yoru NWA logs and performing a trace should provide you with more detail though.
Here is where I would look:
1.) Check the portal proxy config. It may well be that you have also cache enabled access to your exchange environment and any dynamic changes are causing your problem.
2.) Your IIS settings for the calander app need to be reviewed. You may need to re-register the dll and refresh the app or restart IIS. This is typical of dynamic changes in you IIS space. You may need to establish change windows to prevent issues from occurrng.
3.) Your security configuration on IIS need to be reviewed. If the aplication session lifetime is different to that of your portal session lifetime and you are invalidated by IIS you will experience issues.
Hope this helps.
Doug.
Check the IIS logs or NWA logs for additional info to isolate the root cause.

I have problems with the wi-fi connection after upgrading my iPhone to iOS 5- why?

Since upgrading the software on my iPhone 4 to iOS5, I have had all sorts of wi-fi connection problems.
The wireless router I have always used is now usually not detected by my iPhone. It still works on my MacBook and iPad, but not on my iPhone. When it is detected, the connection lasts for a few minutes before cutting out. The signal is also very low.
I have tried the following:
-Restarting the router
-Restarting my iPhone
-Resetting my network settings
-Restoring to factory defaults
-Forgetting the network
-Rejoining the network
-Setting up the connection manually
-Turning off location services on my iPhone (I read in another thread this would help)
I am running out of ideas and I have tried researching this. I found many people with the same problem but no solution for my problem yet.
Does anyone have any ideas, or know whether Apple is planning on fixing this anytime soon? It's a huge disappointment.

I tried this! Somebody suggested it in another thread. It did not work, sadly.

Problems with the Wi-Fi connection

My computers has a problem with Wi-Fi. I have to reconect it each time I tourn it on.

I tried this! Somebody suggested it in another thread. It did not work, sadly.

There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server

Hello,
I have an issue with connecting client SB1H on Windows, the scenario is as follows:
1.- Server:
     Suse Linux Enterprise Server 11.3 kernel version: 3.0.76-0.11 IBM
     NDB and Server are review 69 SP06
2.- Client:
     Windows 8 Pro Virtual Machine on Microsoft Hyper-V
     SB1H PL 11 version 32bits
     SAP HANA Studio version 1.0.60
When I run SB1H the following message appears:
There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server.
Any idea what could be the solution?

Hi,
Please check SAP notes:
   1993392 - Server components setup wizard: New default values for certificates and single sign-on option
1929288 - Do not configure SSL for XApp during installation or upgrade if XApp is installed on a different machine than the SAP HANA server
Thanks & Regards,
Nagarajan

Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

Is anyone else experiencing problems with the thunderbolt port on their Mac Mini's regarding using it to connect a second monitor? I've got the Mini Display Port to DVI-D adapter along with a DVI-D cable and I can't get an image on the second monitor.

I had an dual display image / setup working twice for a few seconds, but then it cut out. I think there may be a problem with the thunderbolt port.

As far as I can tell you have only listed that you have a DVI monitor connected to the Mini Displayport socket (i.e. the Thunderbolt socket) via presumably the Apple Mini Displayport to DVI adapter and a DVI to DVI cable.
You don't appear to have listed what the second monitor is and how it is connected (even though not working). As such I cannot tell what may be wrong.

Why do I get an "unable to connect - There may be a problem with the mail server or network." message from iCloud. I have verified the settings. I can access my iCloud account online but can't send or receive e-mail via the mail account.

Text limits to the "Question" link prevents a full explanation:
This is a long-time problem. I have tried to resolve it with Apple but their "Customer Support" is merely a name.
I can go online and access my e-mail but when I try to send or receive e-mail via iCloud through my internet server (Google fiber now but the same situation existed with my prior service), I receive "There may be a problem with the mail server or network. Verify the settings for 'Apple Email' and try again.
"The server returned the error: The server 'p0-imap.mail.me.com' refused to allow a connection on port 143."
Well, I have verified the setting and tried again and again and …
Well, you get the idea …

JungleTaxi Cabbie wrote:
Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
Enter your Incoming Mail Server, User Name, and Password using the following settings:
Incoming Mail Server: mail.me.com
User Name: Your iCloud email address (excluding @me.com)
Password: Your password
Last Modified: Jun 27, 2013
Maybe you should test these things before calling people out, because these settings do function perfectly well.
iCloud is not supported on Snow Leopard or lower, why bother to mention it?
The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
JungleTaxi Cabbie wrote:
Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
I never said that there was, perhaps you imagined it.

I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years, I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months

I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years,
I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation. All other synchronisation areas (eg Contacts, Notes etc) work fine.
I have looked for help through the Apple Support Community and tried many things. I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether. I need to have a properly synchronising calendar on my phone. Do you have any suggestions?

In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery. (from memory, so exact wording may be off)
The lower the numbers you use there, the longer the battery *should* last. These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
--- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine

Problems with the Fios 20/5 connection speed in my area dropping down to less than 3mbs.

I have written out a flyer that I plan to go door to door with. Since I am under contract with Verizon, I am forced to honor my side of the contract. Even if they are allowed to make me pay for a service that I am not completely getting. I am very displeased and as soon as my contract is up, I will change back to My local cable companies all in one that does not require a contract and has no issue such as the one I am having.
Do you have Verizon Fios Internet?
Are you on the 20/5 connection?
If so, you may not be getting the speed you are paying for. I am on a 20/5 connection and when my computer is on for longer than an hour the internet download speed with Verizon Fios starts to slow down until it is below 3mbs. It takes about 24 hours to get down to 3mbs but only about an hour or two to get down to about 6-7mbs when I am paying for 20mbs…
I have 3 computers in my home that have Windows Vista, Windows XP home edition and Windows Media Edition 2005. All of the computers run into this same exact issue, I have tried every setting I could think of with my 24 years of computer technical experience. I finally took one machine with Windows XP and ran a full format on the hard drive and reinstalled a fresh Windows Xp Operating system onto the hard drive so it is a bare bones OS. This way there is no other software on the machine that could possibly be causing the problem and found that when I connected online through Verizon Fios the machine still ran into the same exact issue. This proves to me that the issue is not on any of my machines.
Now all of this time my buddy that lives 1.2 miles away from my house has been having the same issue with three computers at his home also. He has Windows Vista on two machines and Windows XP Pro on one.
When I concluded that it was a Verizon Fios issue, after a few months of trying to get by, researching, diagnosing and losing much information in order to verify it was on Verizon’s side, I contacted technical support at Verizon’s online website. The agent and I went through the regular procedure that anyone would have to go through and I patiently explained what I had done to try to diagnose the issue. The agent came to the conclusion that he could not figure out the problem so he guessed that the Verizon router/modem may be the issue and told me he would send me a new one by mail.
I received the new Verizon router/modem, installed it and had to call to have it activated. Afterward it still had the same exact issue as the prior router/modem. So now we know it’s not my computers, it’s not the router/modem. My Verizon router/modem is connected right at the Optical Network Terminal (ONT), which is the box that connects the fiber-optics to your home, usually just inside or outside your garage wall. Mine is just outside…
From here my buddy, who has been having this problem also the entire time, called the local office of Verizon Fios and an installer was setup to come over to his home and trouble shoot the issue. My buddy called me and told me when the installer was headed to his home and I met him at his home to see what the installer found and in hope that my issue would be fixed at the same time. The installer went through the system at his house and was frustrated about not finding the reason for the issue and ready to leave without fixing anything. I simply asked that he stay long enough to see the issue present itself within an hour-hour and a half.
His laptop itself already showed the speed drop from 20mbs to between 16-17mbs, it was on its way down. He basically told us something that online tech support already stated to me, it is extremely difficult to prove it is on Verizon’s side. In other words it is extremely difficult to prove it, in a way that will convince Verizon to check its own servers, routers and software updates to their own systems. The installer, good guy, couldn’t/wouldn’t stay but we did convince him not to simply drop the issue. He called shop and they sent another installer out to take over the issue.
The new installer, great guy, got up to speed on what was already done at my buddies home. The first installer, checked and replaced the Verizon router/modem, checked the wiring and splitters. Basically went through the entire system up to the Optical Network Terminal (ONT), the box that connects the fiber-optics to your home. He pulled and replaced the Optical Network Terminal (ONT), thinking that perhaps the unit was compromised. While he was doing this job a tech was called and asked to stop by for assistance with the issue. The tech checked the computers inside and tried to do some settings that the main office informed him to try. I explained to the tech that the same issue was happening at my house, that I went through every setting I could think of and find online to help alleviate the issue. After some shop talk about what I had tried, including the full format and reinstall of the operating system on one of my machines, he just as I came to the conclusion that it couldn’t be with the computers and since everything that had to do with the Verizon Fios system from the street to the end-user computer had been checked, verified and/or replaced, the issue had to be coming from Verizon’s main office.
The installer had already checked the main at the road that has the 3x2 green service cover on it by the side walk. Everything was in good working order. The tech called the main office to see if my buddy and I were on the same hub, basically a big splitter that continues the service from the main office to the homes, we were not. So that was ruled out…
My understanding of the system ends there. The only other components I know of are the Main branch’s routers, servers and software.
Verizon had a new connection speed added to their system, 25/15 about the same time our issue began. So I am guessing that when they updated the system to include this new connection speed they corrupted the software for the 20/5 connection.
We have been waiting to hear from the tech that was at my buddy’s house, to see if the issue will be dealt with. My buddy has called him a couple of times and he has mentioned that he is trying to get it addressed and to call back if we hadn’t heard from him. He remembered who he and I were and what the issue was, so I believe he is taking it seriously. How far he can move the issue is beyond me…
I want to add that my buddy and I have been customers with the all in one package from Verizon Fios since their services have moved into our area, about a year and a half… It has only been since about June that this issue has presented itself, before then we were on 7th heaven with the speeds. We couldn’t have been more than happy with the services.
This issue has caused that to all go afoul, not only do the speeds get down to less than 3mbs but the speed is not smooth at all. Rather the 3mbs speed is stop and go, freezing in between at times, very choppy. Barely usable at times, unless you restart the computers and start over.
We are hoping that anyone with Verizon Fios Internet Services will keep an eye on their speeds by going to http://speedtest.net and doing tests to verify they are getting the speeds they are paying Verizon for.
This is what it will take for Verizon to take this issue seriously is to gather everyone on the system that may be having the same issue. I believe it is everyone that is within the 1.2 miles from my house to my buddy’s and will distribute flyers to each and every house in between.
If you find that your speed is not as fast as it should be please contact me and I will add you to the list, this way we can see exactly how far this problem covers and perhaps it will also help to show a pattern and understanding as to why the issue is present in the first place.
My contact information,
I have left this out here, you can contact me on these forums...

Actually what this came down to was an issue between Windows Vista and an Ethernet Card on one of the machines in each of our local networks.
Even though our two machines are 6 years apart, we both have the same ethernet adapter on our main desktops. A RealTek RTL8139/810x Family Fast Ethernet Nic. It seems that the adapter does not work at the 20mbs download speeds with Vista. For some reason the adapter does not shut down when the computer does? I don't understand why but it doesn't, it keeps the connection alive. I removed the ethernet cable and pulled the power cable and had my two other computers still connected to the network and found that the issue was resolved. The way I found out was that I used the connections on my main computer to hook up one I had laying around and through further testing found the problem no longer existed...
Then I realized that my buddy and I installed Windows Vista at about the same time, a couple of months ago. Funny how you can forget an important detail like that. Then I remembered that he had the same identical ethernet adapter as I did, I had noticed that while trouble shooting his computer at his home but didn't think it was important at the time. Until the issue was narrowed down to the adapter, then it all seemed to all fall into line.
Quite humbling... In the end, anyone who has Windows Vista and this NIC probably will have problems with the 20mbs download speed of the computers on their own networks. I tried the latest Vista driver from RealTek and also tried to roll back the driver, with no success....
Back at the beginning when we first had fios installed in our homes there wasn't an issue when we had the 10/2 speeds and had Vista. Then we decided to change from Vista to XP because we both were having issues as to what programs you could use and which you could not, shortly after having fios installed. Then when verizon upgraded us to 20/5 we were amazed at the speed and still had no issue because we had XP on our main computers with the RealTek adapters...
We reinstalled Vista because it seemed like we were having more issues with XP by getting hit with Antivirus2008 and its variants and thought it time for a change back...
It didn't really hit us that Vista could be the culprit because we both have a laptop in our networks that have had Vista on them from the get go when there were no issues... We also didn't notice just how bad it was right away and over time kind of left the Vista install out of the equation.
Just strange that one computer can effect all the other computers on the network, even when it is shut down...
I allowed the other two computers to run 24hours and the issue did not present itself, when I added the main computer with the RealTek adapter back to the mix it reappeared. The Realtek adapter is the only real common denominator between his machine and mine.
So now we have three choices,
We can go back to Windows XP.
We can buy a new NIC or a wireless card to replace the RealTek...
Hopefully this post will help anyone else who runs into this problem, it has been very frustrating to say the least...
Thanks to everyone for their help and I apologize for complaining about verizon when it was not a verizon issue. I came to the conclusion that the only part verizon really played was upgrading us to a 20/5 tier which I am thankful for...
Would be nice if this card was on a list that Verizon support could use to troubleshoot , diagnose or eliminate for future support issues.
Message Edited by keiser0619 on 08-06-2009 03:58 PM

HT1476 my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?

my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?
It seems to me that the connection port is faulty.
George

Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Since the most recent Firefox update 3.6.8 by banking institution no longer shows as having a secure encrypted connection, however, my bank assures me all is well with their certificates and that is a problem with the new Firefox browser update, can you g

Since the most recent Firefox update 3.6.8 my banking institution no longer shows as having a secure encrypted connection, however, my bank assures me all is well with their certificates and that is a problem with the new Firefox browser update, can you give me some idea why it is doing this?
== This happened ==
Every time Firefox opened
== Right after the new Firefox update

Hello Anne.
Can you please try it in a new (temporary) Firefox profile and see if the issue is still present? See [http://support.mozilla.com/en-US/kb/Managing+profiles this article] to know how to create a new Firefox profile. Please report back the results.

I am having problems with the wifi connection on my ipad 4th generation only 3 weeks old. Have left it back to the shop i bought it in and they said they have to send it away now i am left with no ipad. What after sales support do you give really?

Does anyone else have problems with the wifi connection on their 4th generation Mine keeps going off line and its only 3 weeks old.I had the ipad mini and this problem never existed. I brought it back to the shop where i bought it Expert Laois last week and they said they couldnt find a problem but had to take it back today as it keeps disconneting from wifi still, anyway they are sending it back for repair and it am left with no ipad. After spending in excess of 700e i feel that this is really bad after sales service. I bought something that i want to use now and cant so what a waste of money it is .

Thankyou, but the shop said that they spoken to apple and that they have now changed their policy and that they do not give a replacement. So are you telling me that their information is false. Also what should they have done. This problem has existed since i bought it.????? What should i do?????

My iPhone 5 is experiencing problems with the Wifi at home. It shows that it is connected to the wifi but anything that uses wifi doesn't load. The wifi works sometimes however but this is rare. How do I fix this?

My iPhone 5 is experiencing problems with the Wifi at home. It shows that it is connected to the wifi but anything that uses wifi (apps etc) doesn't load content and just looks like it's loading forever but nothing ever comes. However the wifi and wifi/internet dependant apps work sometimes but it's rare. How do I fix this?

Back up all data.
Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
          8.8.8.8
          8.8.4.4
That's Google DNS. Click OK, then Apply.
In Safari, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If you’re using another browser, empty the cache. Test. Any difference?
Notes:
1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click Apply in order for any changes to take effect.
2. I don't use Google DNS myself, though I have tested it, and I'm not recommending it or any other DNS provider; the server addresses are offered merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

Problems with the "credentials to connect" on Linux

Similar Messages

Maybe you are looking for