Problems with the File System Repository & User Mapping!

Hi All
I am having a problem with a file system repository, and setting up user mapping for that repository.
I have done the following:
Created a File System Repository
Created a Network Path
Created a System (Including the alias)
Now when I go into User Administration and select my user the is no user mapped systems to select.
All this system is doing is connecering to a folder on our File System.
Any help would be great as this is really frustrating!
Thanks
Phil

I am using EP7 Stack 11 and unfortunately the only options I have are:
user
admin
admin,user
It is currently set to admin, user and does not seem to work!
Phil
Message was edited by:
Phil Wade

Similar Messages

File System Repository - User Mapping not Working

Hi,
I tried to integrate a file system into KM. For doing so, I followed the guide located at [http://help.sap.com/saphelp_nw04/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm|http://help.sap.com/saphelp_nw04/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm].
The only problem is, tht the user mapping doesn't seem to work...
The portal is running on a UNIX system, whereas the file share to be integrated is running on a Windows 2003 Server.
Here are the single steps that I performed:
- Creation of a KM Windows System in the system landscape directory with the ID "MySystem". User Mapping is set to "User,Admin"
- Creation of a Windows System in the system landscpe of the KM with the ID "MySystem"
- Creation of a Network Path in KM with following settings:
jCIFS Protocol is activated; Network Path = "
My Server\My Share"; User = "My Windows Domain\My User" and the according password. The specified user has administration permissions on the server.
- Creation of a readonly File System Repository Manager with following settings:
Root-Directory = "
My Server\My Share", SecurityManager = W2kSecurityManager, ACL Manager Cache = ca_rsrc_acl, Windows Landscape System = "MySystem"
- Configuration of the W2KSecurityManager: I specified the DomainFile-setting as "/etc/companydomaincontrollers.txt"
and placed such a file in the KM with following setting: "My.Server.Domain=According IP Adress"
- In UME I carried out user mapping for index_service user and placed the above mentioned admin user into the user mapping.
Result: The indexing works fine, all fles are indexed. When I however try to carry out a user mapping for a "normal" portal user in the UME it doesn't work: The portal user has no access to the file system. (I used the same admin user for mapping... so it should work).
Any help is appreciated...
P.S. With portal super admin users I can however access the fle system repository, even without user mapping. But I think this is ok, because I read in one forum message that admin users have always access in general....

>
Frank Friedrich wrote:
> Hi Clemens,
>
> so the good think is that indexing is working and you can navigate with your admin portal user through the file system repository. In this case the most configuration settings must be correct.
>
> I am not quite sure regarding your System objects with the ID "MySystem". Do you have as well define an Alias Name for this System Object with the same name "MySystem" ? As well upper and lower letters are important.
>
> Because the reference is all the time the Alias name and not the ID or Name of your System object.
>
> Best regards
> Frank
Hi Frank,
thanks for your reply.
I have as well definied an Alias Name with exactly the same id. So this gives us following:
System landscape directory: KM Windows System with id="MySystem" and Alias="MySystem"
KM System Landscape: Windows System with id="MySystem"
In the created file system repository manager I also set "MySystem" for the Windows Landscape System parameter.
So I think that this should be correct (I also considered upper- and lowercase letters).
Maybe the probem lies in specifying the domain names? When I applied user mapping I always additionally specified the Windows domain name of the users, which is correct I think.
In the security manager configuration for the domain controllers (-> [http://help.sap.com/saphelp_nw04s/helpdata/en/a9/c54e9e09448d46b73d154e93d5e995/content.htm]) I however mapped the network domain of the file share server to the according IP adress. Maybe this is wrong?

Problems with creating reference system and user mapping in EP

Hi@all,
we have deployed Support Package Stack 25 in our portal. After that, the UWLJWF Administration was not available anymore. We get Portal Runtime Error. We habe resolved this error!
In the UME Administration in the System Administration --> System Configuration --> UME Configuration --> User Mapping tab
there was a message saying that CTS was non-existent. I changed the Reference System to (No reference system) and the UWL Admin page is working now!
But now, the SSO to our 3rd Party System is not possible anymore!
I have created an new system alias but i cannot see it in the User Mapping tab. How is it possible. I found no documentation?
Thany you and best regards
Juergen

I am using EP7 Stack 11 and unfortunately the only options I have are:
user
admin
admin,user
It is currently set to admin, user and does not seem to work!
Phil
Message was edited by:
Phil Wade

MacBookPro SSD Error- ALERT: The partition map needs to be repaired because there's a problem with the EFI system partition's file system.

MacBook Pro OS x Mavericks. I have Sandisk 256GB SSD and I am getting a below error message.
ALERT: The partition map needs to be repaired because there's a problem with the EFI system partition's file system.
Does anyone know how to resolve this error and fix it ? unfortunately I don't have a Time Machine backup. Thanks!

Have you tried to run the verify/repair permissions and verify/repair disk through the recovery disk? If that didn't work then I would reinstall the OS after backing up. If that still doesn't work I would take it in.

Problem with the EFI system partition's file system.

I installed latest yosemite 10.10.2 update - did a verify disk on “WDC WD1001FALS-403AA0 Media” (internal HD on my iMac 21.5-inch, Mid 2011) and got
Problems were found with the partition map which might prevent booting
Error: The partition map needs to be repaired because there’s a problem with the EFI system partition’s file system.
However a verify disk on the volume partition gets a clean bill of health!
I haven't done a 'repair disk' yet. Thought I'd check if anybody else has same message first.
Cheers

I had issues where my MacPro 8-core would not boot after the 10.7.4 upgrade, but my MacBook Air 13" 2011 upgrade worked just fine.
I had to restore my MacPro HD from my TimeMachine back up. Apparently, the Softraid raid drivers that I use on my MacPro are not compatible yet with 10.7.4. See here for more info:
http://macperformanceguide.com/blog/2012/20120511_1-MacOSX-SoftRAID.html
I contacted Softraid and they are already aware of the issues and are working with Apple for a fix.
Cheers.
Bud

I am trying to get the free trial to cc but it said there seems to be a problem with the files (Error code: 205)

I am trying to get the free trial to cc but it said there seems to be a problem with the files (Error code: 205) please help

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

'A problem with the cooling system' error message on Satellite A660

Hi all,
Hope I can get some help here. I've had about 5 HP laptops after all of them had problems and faults. I got sick of them and therefore got a refund and bought a high spec A660-1FH.
The A660 has been a great laptop for two days until yesterday when I started getting a warning message saying 'A problem with the cooling system has been detected. Please turn off the computer immediately, and return it for service'.
The cpu fan works fine as you can here it spinning and the temperature of the i5-460m processor is around 40 degrees for both cores - which seems normal to me. I've noted that it happens only when running on battery and if you switch from eco utility to power saver mode. Its fine when running on the 'balanced' power setting. The fan is louder before when this message appears.
As its under 28 days my retailer swapped it for a brand new one straight away. Got the new one home, and the same message appears again. Has anyone else experienced this. As two laptops have had this, I'm wondering if this is normal for the A660 series laptop or if there is really a hardware issue?!
I have tried to upgrade eco utility and the bios of the laptop but both are the latest versions. Can anyone help or share if they experience a similar issue with their laptop?
Thanks

In front of me I have Satellite A660-13Q (PSAW3E) and I have it about 6 weeks now. It runs almost 10 hours daily and until now I didnt notice such message or anything else that can be suspect for hardware functionality.
I really dont know why this happen on your notebook and dont think there is anything you can do about it.
I would exchange it again. What you can also try is to contact nearest Toshiba service. Make a call, explain the situation and ask if they can help you with this.

A problem with the cooling system has been detected

I bought a new computer not to long ago, I've had it for almost a month now. It runs fine, and I've had no problems until not too long ago. I was playing a game, and I got a random error message: "A problem with the cooling system has been detected. Please turn off the computer immdiately, and return it for service." I don't understand how or why this came up, and I don't have any money to return it for any type of repairs. After I got this message, I left my computer off for about an hour. All seems well so far. Any suggestions?

What laptop do you have?
- Peter

Error: There is a problem with the file and it cannot be copied

I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.

That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything!

There seems to be a problem with the file download. For troubleshooting tips, please visit our customer support page

There seems to be a problem with the file download. For troubleshooting tips, please visit our customer support page.

Thank you for the update Dlawrenceusa. I would recommend reviewing the installation logs for the updates that are failing to apply to determine the exact cause of the failure. You can find details on how to locate and interpret the installation log files at Creative Cloud Help / Troubleshoot install issues with log files | CC. You are welcome to post any specific error messages you discover to this discussion.

Hi i am trying to open a pdf but " preview " is saying that the file cannot be opened or that there is a problem with the file - what do i do? :-)

hi i am trying to open a pdf but " preview " is saying that the file cannot be opened or that there is a problem with the file - what do i do? :-)

Try opening the file using Adobe Reader.
Clinton

Satellite A40- Warning: problem with the cooling system has been detected

Hello guys,
I'm getting the following message from time to time:
Warning: a problem with the cooling system has been detected Toshiba
Please turn off the computer immediately, and return it for servise.
I have Windows XP on it.
I opened the cooling fan and clean it. Off course, I found it rally dirty.
But, still I'm getting this message!!!
What I shall to do ??
I'm living in north Germany.
Any advise is most welcome and thanks in advance.
Ibraheem

Hi
The message says everything!!!
In such case you have to contact the authorized service provider in you country!
>I opened the cooling fan and clean it. Off course, I found it rally dirty.
Possibly the cooling modules dont as should and therefore the message appears again!
Nothing to do buddy... you need an help from notebook technician

Satellite P500-12D - A problem with the cooling system has been detected

hi there everyone,
I have bought a Satellite P500-12D which was a retail return. When I start it up it runs a couple of mins and then this comes up on the screen:
Warning: A problem with the cooling system has been detected. please turn off the computer immediately and return it for service.
In the toshiba health monitor the cpu is under 50% temp and if it goes much above that the cooling fan comes on and lowers it back down and the fan stops again, I have noticed that only the r/h fan runs to cool the cpu, should both them come on together? Could it be a software problem?
Tthe unit is new without even the plastic off the screen surround or webcam. Any help or even point me in the right direction would be very appreciated, gary

The fact that the pc is a retail return would indicate that there was a fault at day one and the customer returned it. At some point the retailer turned it on and since it appeared to work re-sold it.
This is the cooling/fan report from a P500 produced by pc wizard 2010 - free from cpuid.com. Perhaps a comparison against the faulty laptop will point to the problem
<<< Voltage, Temperature and Fans >>>
> Hardware Monitoring : National LM79
> Voltage CPU : 1.02 V
> +3.3V Voltage : 1.02 V
> +5V Voltage : 0.43 V
> +12V Voltage : 1.02 V
> Chassis Fan : 42187 rpm
> Power/Aux Fan : 21093 rpm
> Processor Temperature : 64 C
> Mainboard Temperature : 16 C
> Hardware Monitoring : ACPI
> Thermal Zone : 48 C
> Processor :
> Intel Mobile Core 2 Duo (Core 1) : 57 C
> Intel Mobile Core 2 Duo (Core 2) : 58 C
> NVIDIA GeForce GT 230M : nVidia Driver
> GPU Temperature : 35 C
> GPU Diode : 35 C
> GPU Fan : 100.0%
> Hard Disk Monitoring : S.M.A.R.T
> Hard Disk TOSHIBA MK5055GSX (Assembly) : 38 C
> Hard Disk TOSHIBA MK5055GSX (Assembly) : 27 C

"Performance" problems with the File adapter on Plain J2SE Adapter Engine

Hi,
At the moment I'm on a customer side to solve some XI issues for a few days. One of the issues is the performance of the Plain J2SE Adapter Engine, using the file adapter to transfer XML messages(already XI message format) from the legacy system to the Integration Engine. The File adapter has to deal with "large" XML messages(max at the moment is 65 Mb) and the engine fails with the following error when transferring the big XML file: "ERROR: Finished sending to Integration Engine with error "java.lang.OutOfMemoryError". Skip confirmation and quit this loop".
As far I got the information from the customer the memory use of the Plain adapter engine is set to 512Mb. This is maybe to low. But I don't know where to look for this, I only have the adapter web interface in front of me, no access to the OS it self via for example remote connection.
On the Integration Engine I know there is the ability to split large message with the file adapter(File Content Conversion), but I don't know this for the Plain Adapter Engine. Is there a possibility to do this also on the Plain Adapter Engine?
Thanks in advance for any input.
Greetings,
Patrick

Hi Sameer,
Thanks for your answers.
On the first solution, yes that is possible, we first decided to see if the legacy system can do the splitting, before starting developing a Java program.
On the second solution, as far as I know is this solution possible on the Integration Engine. But we are facing the problems on the Plain J2SE Adapter Engine. I went trough that documentation(link:
http://help.sap.com/saphelp_nw04/helpdata/en/6f/246b3de666930fe10000000a114084/frameset.htm ), to look for I similiar solution in the Plain Adapter Engine. So my question is, is this possible with the Plain Adapter? And if so, what kind of parameters I need to use to achieve this.
Regards,
Patrick

The form base xlm can't creat in the File System Repository

Hi all
A document created by the sap demo news can display in the folder base the cm Repository corrected,but can't in File System Repository.
What is the reason？
Edited by: joecui on Apr 9, 2010 7:11 AM

Hi,
You should not use the /etc repository for creating and storing xmlforms or any content!! This repository is used for configuration purposes and should not be visible to end users, otherwise there would be a very strong possibility that your CM config could be modified, deleted etc.
If you want you should create your own FS repository pointing to a separate FS location to which your end users have access.
Regards,
Lorcan.

Problems with the File System Repository & User Mapping!

Similar Messages

Maybe you are looking for