Problems with ' versus '

I am having some issues with dreamweaver and sepcial characters. I copy all my text into notepad to clean it before putting it into dreamweaver. However, certain characters like the ’ are being used in notepad instead of ' so when I upload to my website I get a special character or other unsightly result. Please advise.

A right slanted quote should not be used in html text unless you turn it into an html entity. The html entity for a right slanted quote is ’
Here is a good list of html entity codes...
http://www.utexas.edu/learn/html/spchar.html

Similar Messages

  • Problem with  trasparent gateway versus Microsoft SqlServer.

    Hi.
    When I declare a cursor into PL-SQL procedure that select records from a SQL-SERVER table linked using a trasparent gateway.
    I have two problem:
    -1- I' m unable to update the linked table. I receve e timeout exception.
    -2- whe I execute the second fatch operation I receve ad error : invalid cursor.
    Trasparent gateway is configured as two_fase_commit.
    Can Anyone help me?
    Best regards.
    Vincenzo

    Hallo
    Yes I've tired ad it correctly work. But when I exit from cursor without make commit, and I run this simple update query (that works in sql/plus)
    "update lsruni_ser@anaconda set "lsruni_ser_flag_elab" = 'Y' where "lsruni_ser_flag_elab" = 'Y';" I receve a timout messagge from SQL SERVER.
    I HAVE GREAT PROBLEM WITH INSERT QUERY USED IN A PL-SQL PROCEDURE.
    Thank You for support.
    Vincenzo

  • Problem with htmldb 2 (Sorry APEX)!

    I installed htmldb 2 on a windows XP, Oracle 10gR1 (which has enhanced by companion CD downloaded form Oracle's site). Everything went OK but when I want to connect to it by this url: http://localhost:7777/pls/htmldb it takes my username,pass but says:
    "Service Temporarily Unavailable
    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
    Oracle-HTTP-Server/1.3.28 Server at localhost Port 7777"
    I noticed many differences between my installed Apache and documents of htmldb. I run a 9.0.4.0.0 Apache server and the dads.conf and httpd.conf are as following:
    # ============================================================================
    # mod_plsql DAD Configuration File
    # ============================================================================
    # 1. Please refer to dads.README for a description of this file
    # ============================================================================
    # Note: This file should typically be included in your plsql.conf file with
    # the "include" directive.
    # Hint: You can look at some sample DADs in the dads.README file
    # ============================================================================
    Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
    <Location /pls/htmldb>
    SetHandler pls_handler
    Order deny,allow
    Allow from all
    AllowOverride None
    PlsqlDatabaseUsername HTMLDB_PUBLIC_USER     
    PlsqlDatabasePassword @BI+fAonVS+7xU8G04irVINWznM6s+A9fuQ==
    PlsqlDatabaseConnectString chagh
    PlsqlDefaultPage htmldb
    PlsqlDocumentTablename wwv_flow_file_objects$
    PlsqlDocumentPath docs
    PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
    PlsqlAuthenticationMode Basic
    PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
    </Location>
    # Based upon the NCSA server configuration files originally by Rob McCool.
    # This is the main Apache server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://www.apache.org/docs/> for detailed information about
    # the directives.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # After this file is processed, the server will look for and process
    # E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/srm.conf and then E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/access.conf
    # unless you have overridden these with ResourceConfig and/or
    # AccessConfig directives here.
    # The configuration directives are grouped into three basic sections:
    # 1. Directives that control the operation of the Apache server process as a
    # whole (the 'global environment').
    # 2. Directives that define the parameters of the 'main' or 'default' server,
    # which responds to requests that aren't handled by a virtual host.
    # These directives also provide default values for the settings
    # of all virtual hosts.
    # 3. Settings for virtual hosts, which allow Web requests to be sent to
    # different IP addresses or hostnames and have them handled by the
    # same Apache server process.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do not begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "E:\oracle\product\10.1.0\Companion\Apache\Apache" will be interpreted by the
    # server as "E:\oracle\product\10.1.0\Companion\Apache\Apache/logs/foo.log".
    # NOTE: Where filenames are specified, you must use forward slashes
    # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
    # If a drive letter is omitted, the drive on which Apache.exe is located
    # will be used by default. It is recommended that you always supply
    # an explicit drive letter in absolute paths, however, to avoid
    # confusion.
    ### Section 1: Global Environment
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.
    # ServerType is either inetd, or standalone. Inetd mode is only supported on
    # Unix platforms.
    ServerType standalone
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do NOT add a slash at the end of the directory path.
    ServerRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache"
    # PidFile: The file in which the server should record its process
    # identification number when it starts.
    PidFile logs/httpd.pid
    # ScoreBoardFile: File used to store internal server process information.
    # Not all architectures require this. But if yours does (you'll know because
    # this file will be created when you run Apache) then you must ensure that
    # no two invocations of Apache share the same scoreboard file.
    ScoreBoardFile logs/httpd.scoreboard
    # In the standard configuration, the server will process httpd.conf (this
    # file, specified by the -f command line option), srm.conf, and access.conf
    # in that order. The latter two files are now distributed empty, as it is
    # recommended that all directives be kept in a single file for simplicity.
    # The commented-out values below are the built-in defaults. You can have the
    # server ignore these files altogether by using "/dev/null" (for Unix) or
    # "nul" (for Win32) for the arguments to the directives.
    #ResourceConfig conf/srm.conf
    #AccessConfig conf/access.conf
    # Timeout: The number of seconds before receives and sends time out.
    Timeout 300
    # SendBufferSize: controls setsockopt() call made to set send buffer size on
    # all sockets. Default OS value on most Windows platforms is too small.
    # Larger values can help if the average page size served by OHS is
    # large (~64 k)
    SendBufferSize 16384
    # KeepAlive: Whether or not to allow persistent connections (more than
    # one request per connection). Set to "Off" to deactivate.
    KeepAlive On
    # MaxKeepAliveRequests: The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    MaxKeepAliveRequests 100
    # KeepAliveTimeout: Number of seconds to wait for the next request from the
    # same client on the same connection.
    KeepAliveTimeout 15
    # Apache on Win32 always creates one child process to handle requests. If it
    # dies, another child process is created automatically. Within the child
    # process multiple threads handle incoming requests. The next two
    # directives control the behaviour of the threads and processes.
    # MaxRequestsPerChild: the number of requests each child process is
    # allowed to process before the child dies. The child will exit so
    # as to avoid problems after prolonged use when Apache (and maybe the
    # libraries it uses) leak memory or other resources. On most systems, this
    # isn't really needed, but a few (such as Solaris) do have notable leaks
    # in the libraries. For Win32, set this value to zero (unlimited)
    # unless advised otherwise.
    # NOTE: This value does not include keepalive requests after the initial
    # request per connection. For example, if a child process handles
    # an initial request and 10 subsequent "keptalive" requests, it
    # would only count as 1 request towards this limit.
    MaxRequestsPerChild 0
    # Number of concurrent threads (i.e., requests) the server will allow.
    # Set this value according to the responsiveness of the server (more
    # requests active at once means they're all handled more slowly) and
    # the amount of system resources you'll allow the server to consume.
    ThreadsPerChild 50
    # Server-pool size regulation. Rather than making you guess how many
    # server processes you need, Apache dynamically adapts to the load it
    # sees --- that is, it tries to maintain enough server processes to
    # handle the current load, plus a few spare servers to handle transient
    # load spikes (e.g., multiple simultaneous requests from a single
    # Netscape browser).
    # It does this by periodically checking how many servers are waiting
    # for a request. If there are fewer than MinSpareServers, it creates
    # a new spare. If there are more than MaxSpareServers, some of the
    # spares die off. The default values are probably OK for most sites.
    #MinSpareServers 5
    #MaxSpareServers 20
    # Limit on total number of servers running, i.e., limit on the number
    # of clients who can simultaneously connect --- if this limit is ever
    # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
    # It is intended mainly as a brake to keep a runaway server from taking
    # the system with it as it spirals down...
    #MaxClients 150
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, in addition to the default. See also the <VirtualHost>
    # directive.
    #Listen 3000
    #Listen 12.34.56.78:80
    # BindAddress: You can support virtual hosts with this option. This directive
    # is used to tell the server which IP address to listen to. It can either
    # contain "*", an IP address, or a fully qualified Internet domain name.
    # See also the <VirtualHost> and Listen directives.
    #BindAddress *
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available before they are used.
    # Please read the file README.DSO in the Apache 1.3 distribution for more
    # details about the DSO mechanism and run `apache -l' for the list of already
    # built-in (statically linked and thus always available) modules in your Apache
    # binary.
    # Note: The order in which modules are loaded is important. Don't change
    # the order below without expert advice.
    # Example:
    # LoadModule foo_module libexec/mod_foo.dll
    LoadModule mime_magic_module      modules/ApacheModuleMimeMagic.dll
    LoadModule mime_module          modules/ApacheModuleMime.dll
    LoadModule dbm_auth_module     modules/ApacheModuleAuthDBM.dll
    LoadModule digest_auth_module     modules/ApacheModuleAuthDigest.dll
    LoadModule anon_auth_module      modules/ApacheModuleAuthAnon.dll
    LoadModule cern_meta_module      modules/ApacheModuleCERNMeta.dll
    LoadModule digest_module      modules/ApacheModuleDigest.dll
    LoadModule expires_module      modules/ApacheModuleExpires.dll
    LoadModule headers_module      modules/ApacheModuleHeaders.dll
    LoadModule proxy_module      modules/ApacheModuleProxy.dll
    LoadModule speling_module      modules/ApacheModuleSpeling.dll
    LoadModule status_module      modules/ApacheModuleStatus.dll
    LoadModule info_module          modules/ApacheModuleInfo.dll
    LoadModule usertrack_module      modules/ApacheModuleUserTrack.dll
    LoadModule vhost_alias_module     modules/ApacheModuleVhostAlias.dll
    LoadModule agent_log_module     modules/ApacheModuleLogAgent.dll
    LoadModule referer_log_module     modules/ApacheModuleLogReferer.dll
    LoadModule perl_module      modules/ApacheModulePerl.DLL
    LoadModule fastcgi_module      modules/ApacheModuleFastCGI.dll
    LoadModule onsint_module      modules/ApacheModuleOnsint.dll
    LoadModule wchandshake_module     modules/ApacheModuleWchandshake.dll
    ClearModuleList
    AddModule mod_so.c
    AddModule mod_onsint.c
    AddModule mod_mime_magic.c
    AddModule mod_mime.c
    AddModule mod_access.c
    AddModule mod_auth.c
    AddModule mod_negotiation.c
    AddModule mod_include.c
    AddModule mod_autoindex.c
    AddModule mod_dir.c
    AddModule mod_cgi.c
    AddModule mod_userdir.c
    AddModule mod_alias.c
    AddModule mod_env.c
    AddModule mod_log_config.c
    AddModule mod_asis.c
    AddModule mod_imap.c
    AddModule mod_actions.c
    AddModule mod_setenvif.c
    AddModule mod_isapi.c
    AddModule mod_vhost_alias.c
    AddModule mod_log_referer.c
    AddModule mod_log_agent.c
    AddModule mod_auth_anon.c
    AddModule mod_auth_dbm.c
    AddModule mod_auth_digest.c
    AddModule mod_cern_meta.c
    AddModule mod_digest.c
    AddModule mod_expires.c
    AddModule mod_headers.c
    AddModule mod_proxy.c
    AddModule mod_speling.c
    AddModule mod_info.c
    AddModule mod_status.c
    AddModule mod_usertrack.c
    AddModule mod_perl.c
    AddModule mod_fastcgi.c
    AddModule mod_wchandshake.c
    <IfDefine SSL>
    LoadModule ossl_module      modules/ApacheModuleOSSL.DLL
    </IfDefine>
    # ExtendedStatus controls whether Apache will generate "full" status
    # information (ExtendedStatus On) or just basic information (ExtendedStatus
    # Off) when the "server-status" handler is called. The default is Off.
    ExtendedStatus On
    ### Section 2: 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # Port: The port to which the standalone server listens. Certain firewall
    # products must be configured before Apache can listen to a specific port.
    # Other running httpd servers will also interfere with this port. Disable
    # all firewall, security, and other services if you encounter problems.
    # To help diagnose problems use the Windows NT command NETSTAT -a
    Port 7777
    Listen 7777
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents.
    ServerAdmin [email protected]
    # ServerName allows you to set a host name which is sent back to clients for
    # your server if it's different than the one the program would get (i.e., use
    # "www" instead of the host's real name).
    # Note: You cannot just invent host names and hope they work. The name you
    # define here must be a valid DNS name for your host. If you don't understand
    # this, ask your network administrator.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    # You will have to access it by its address (e.g., http://123.45.67.89/)
    # anyway, and this will make redirections work in a sensible way.
    # 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
    # machine always knows itself by this address. If you use Apache strictly for
    # local testing and development, you may use 127.0.0.1 as the server name.
    ServerName localhost
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs"
    # Each directory to which Apache has access, can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # permissions.
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs">
    # This may also be "None", "All", or any combination of "Indexes",
    # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
    # Note that "MultiViews" must be named explicitly --- "Options All"
    # doesn't give it to you.
    Options Indexes FollowSymLinks MultiViews
    # This controls which options the .htaccess files in directories can
    # override. Can also be "All", or any combination of "Options", "FileInfo",
    # "AuthConfig", and "Limit"
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
    </Directory>
    # UserDir: The name of the directory which is appended onto a user's home
    # directory if a ~user request is received.
    # Under Win32, we do not currently try to determine the home directory of
    # a Windows login, so a format such as that below needs to be used. See
    # the UserDir documentation for details.
    <IfModule mod_userdir.c>
         UserDir "E:\oracle\product\10.1.0\Companion\Apache\Apache\users\"
    </IfModule>
    # Control access to UserDir directories. The following is an example
    # for a site where these directories are restricted to read-only.
    #<Directory /home/*/public_html>
    # AllowOverride FileInfo AuthConfig Limit
    # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
    # <Limit GET POST OPTIONS PROPFIND>
    # Order allow,deny
    # Allow from all
    # </Limit>
    # <LimitExcept GET POST OPTIONS PROPFIND>
    # Order deny,allow
    # Deny from all
    # </LimitExcept>
    #</Directory>
    # DirectoryIndex: Name of the file or files to use as a pre-written HTML
    # directory index. Separate multiple entries with spaces.
    <IfModule mod_dir.c>
    DirectoryIndex index.html
    </IfModule>
    # AccessFileName: The name of the file to look for in each directory
    # for access control information.
    AccessFileName .htaccess
    # The following lines prevent .htaccess files from being viewed by
    # Web clients. Since .htaccess files often contain authorization
    # information, access is disallowed for security reasons. Comment
    # these lines out if you want Web visitors to see the contents of
    # .htaccess files. If you change the AccessFileName directive above,
    # be sure to make the corresponding changes here.
    # Also, folks tend to use names such as .htpasswd for password
    # files, so this will protect those as well.
    <Files ~ "^\.ht">
    Order allow,deny
    Deny from all
    </Files>
    # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
    # document that was negotiated on the basis of content. This asks proxy
    # servers not to cache the document. Uncommenting the following line disables
    # this behavior, and proxies will be allowed to cache the documents.
    #CacheNegotiatedDocs
    # UseCanonicalName: (new for 1.3) With this setting turned on, whenever
    # Apache needs to construct a self-referencing URL (a URL that refers back
    # to the server the response is coming from) it will use ServerName and
    # Port to form a "canonical" name. With this setting off, Apache will
    # use the hostname:port that the client supplied, when possible. This
    # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
    UseCanonicalName On
    # TypesConfig describes where the mime.types file (or equivalent) is
    # to be found.
    <IfModule mod_mime.c>
    TypesConfig conf/mime.types
    </IfModule>
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    # mod_mime_magic is not part of the default server (you have to add
    # it yourself with a LoadModule [see the DSO paragraph in the 'Global
    # Environment' section], or recompile the server and include mod_mime_magic
    # as part of the configuration), so it's enclosed in an <IfModule> container.
    # This means that the MIMEMagicFile directive will only be processed if the
    # module is part of the server.
    <IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
    </IfModule>
    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., www.apache.org (on) or 204.62.129.132 (off).
    # The default is off because it'd be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    HostnameLookups Off
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you do define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"
    # LogLevel: Control the number of messages logged to the error.log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    # Alternate "common" format to use when fronted by webcache:
    # LogFormat "%{ClientIP}i %l %u %t \"%r\" %>s %b %h" common_webcache
    # When webcache is forwarding requests to OHS, %h becomes the IP of
    # the originating webcache server and the real client IP is stored
    # in the ClientIP header. The common_webcache format can be used
    # in place of the common format when using webcache but with one
    # important caveat: if clients are capable of bypassing webcache
    # then it is possible to spoof the client IP by manually setting
    # the ClientIP header so the %h field should be monitored in such
    # an environment. Another alternative to specifying the ClientIP
    # header directly in a LogFormat is to use the "UseWebCacheIp"
    # directive:
    # UseWebCacheIp On
    # When this is specified, %h is derived internally from the ClientIP
    # header and the access log format does not need to be modified.
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you do
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and not in this file.
    CustomLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/access_log 43200" common
    # If you would like to have agent and referer logfiles, uncomment the
    # following directives.
    #CustomLog logs/referer.log referer
    #CustomLog logs/agent.log agent
    # If you prefer a single logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog logs/access.log combined
    # Optionally add a line containing the server version and virtual host
    # name to server-generated pages (error documents, FTP directory listings,
    # mod_status and mod_info output etc., but not CGI generated documents).
    # Set to "EMail" to also include a mailto: link to the ServerAdmin.
    # Set to one of: On | Off | EMail
    ServerSignature On
    # Apache parses all CGI scripts for the shebang line by default.
    # This comment line, the first line of the script, consists of the symbols
    # pound (#) and exclamation (!) followed by the path of the program that
    # can execute this specific script. For a perl script, with perl.exe in
    # the C:\Program Files\Perl directory, the shebang line should be:
    #!c:/program files/perl/perl
    # Note you mustnot_ indent the actual shebang line, and it must be the
    # first line of the file. Of course, CGI processing must be enabled by
    # the appropriate ScriptAlias or Options ExecCGI directives for the files
    # or directory in question.
    # However, Apache on Windows allows either the Unix behavior above, or can
    # use the Registry to match files by extention. The command to execute
    # a file of this type is retrieved from the registry by the same method as
    # the Windows Explorer would use to handle double-clicking on a file.
    # These script actions can be configured from the Windows Explorer View menu,
    # 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
    # button allows you to modify the Actions, of which Apache 1.3 attempts to
    # perform the 'Open' Action, and failing that it will try the shebang line.
    # This behavior is subject to change in Apache release 2.0.
    # Each mechanism has it's own specific security weaknesses, from the means
    # to run a program you didn't intend the website owner to invoke, and the
    # best method is a matter of great debate.
    # To enable the this Windows specific behavior (and therefore -disable- the
    # equivilant Unix behavior), uncomment the following directive:
    #ScriptInterpreterSource registry
    # The directive above can be placed in individual <Directory> blocks or the
    # .htaccess file, with either the 'registry' (Windows behavior) or 'script'
    # (Unix behavior) option, and will override this server default option.
    # Aliases: Add here as many aliases as you need (with no limit). The format is
    # Alias fakename realname
    <IfModule mod_alias.c>
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL. So "/icons" isn't aliased in this
    # example, only "/icons/"..
    Alias /jservdocs/ "E:\oracle\product\10.1.0\Companion\Apache\Jserv\docs/"
    Alias /javacachedocs/ "E:\oracle\product\10.1.0\Companion\javacache\javadoc/"
    Alias /icons/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\icons/"
    Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
    <Directory "icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>
    <IfModule mod_perl.c>
         Alias /perl/ "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin/"
    </IfModule>
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    ScriptAlias /cgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin/"
    # "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    </IfModule>
    # End of aliases.
    # Redirect allows you to tell clients about documents which used to exist in
    # your server's namespace, but do not anymore. This allows you to tell the
    # clients where to look for the relocated document.
    # Format: Redirect old-URI new-URL
    # Directives controlling the display of server-generated directory listings.
    <IfModule mod_autoindex.c>
    # FancyIndexing is whether you want fancy directory indexing or standard
    # Note, add the option TrackModified to the IndexOptions default list only
    # if all indexed directories reside on NTFS volumes. The TrackModified flag
    # will report the Last-Modified date to assist caches and proxies to properly
    # track directory changes, but it does not work on FAT volumes.
    IndexOptions FancyIndexing
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions. These are only displayed for
    # FancyIndexed directories.
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*
    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core
    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^
    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    DefaultIcon /icons/unknown.gif
    # AddDescription allows you to place a short description after a file in
    # server-generated indexes. These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz
    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    # If MultiViews are amongst the Options in effect, the server will
    # first look for name.html and include it if found. If name.html
    # doesn't exist, the server will then look for name.txt and include
    # it as plaintext if found.
    ReadmeName README
    HeaderName HEADER
    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing. Shell-style wildcarding is permitted.
    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
    </IfModule>
    # End of indexing directives.
    # Document types.
    <IfModule mod_mime.c>
    # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have nothing
    # to do with the FancyIndexing customization directives above.
    AddEncoding x-compress Z
    AddEncoding x-gzip gz tgz
    # AddLanguage allows you to specify the language of a document. You can
    # then use content negotiation to give a browser a file in a language
    # it can understand.
    # Note 1: The suffix does not have to be the same as the language
    # keyword --- those with documents in Polish (whose net-standard
    # language code is pl) may wish to use "AddLanguage pl .po" to
    # avoid the ambiguity with the common suffix for perl scripts.
    # Note 2: The example entries below illustrate that in quite
    # some cases the two character 'Language' abbriviation is not
    # identical to the two character 'Country' code for its country,
    # E.g. 'Danmark/dk' versus 'Danish/da'.
    # Note 3: In the case of 'ltz' we violate the RFC by using a three char
    # specifier. But there is 'work in progress' to fix this and get
    # the reference data for rfc1766 cleaned up.
    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
    # French (fr) - German (de) - Greek-Modern (el)
    # Italian (it) - Korean (kr) - Norwegian (no)
    # Portugese (pt) - Luxembourgeois* (ltz)
    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
    # Russian (ru)
    AddLanguage ar .ar
    AddLanguage da .dk .da
    AddLanguage nl .nl
    AddLanguage en .en
    AddLanguage et .ee
    AddLanguage fi .fi
    AddLanguage fr .fr
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage es .es_ES .es
    AddLanguage he .he .iw
    AddLanguage hu .hu
    AddCharset ISO-8859-8 .iso8859-8
    AddLanguage it .it
    AddLanguage ja .ja
    AddCharset ISO-2022-JP .jis
    AddLanguage ko .ko
    AddLanguage kr .kr
    AddCharset ISO-2022-KR .iso-kr
    AddLanguage nn .nn
    AddLanguage no .no
    AddLanguage pl .po
    AddCharset ISO-8859-2 .iso-pl
    AddLanguage pt .pt
    AddLanguage pt-br .pt_BR .pt-br
    AddLanguage ltz .lu
    AddLanguage ca .ca
    AddLanguage sk .sk
    AddLanguage sv .sv
    AddLanguage th .th
    AddLanguage tr .tr
    AddLanguage cz .cz .cs
    AddLanguage ro .ro
    AddLanguage ru .ru
    AddLanguage zh-cn .zh_CN
    AddLanguage zh-tw .zh_TW
    AddCharset Big5 .Big5 .big5
    AddCharset WINDOWS-1251 .cp-1251
    AddCharset CP866 .cp866
    AddCharset ISO-8859-5 .iso-ru
    AddCharset KOI8-R .koi8-r
    AddCharset UCS-2 .ucs2
    AddCharset UCS-4 .ucs4
    AddCharset UTF-8 .utf8
    # LanguagePriority allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    # Just list the languages in decreasing order of preference. We have
    # more or less alphabetized them here. You probably want to change this.
    <IfModule mod_negotiation.c>
    LanguagePriority ar en da nl et fi fr de el it ja ko kr no pl pt pt-br ro ru ltz ca es sk sv th tr zh-cn zh-tw zh-cn
    </IfModule>
    # AddType allows you to tweak mime.types without actually editing it, or to
    # make certain files to be certain types.
    # For example, the PHP 3.x module (not part of the Apache distribution - see
    # http://www.php.net) will typically use:
    #AddType application/x-httpd-php3 .php3
    #AddType application/x-httpd-php3-source .phps
    # And for PHP 4.x, use:
    #AddType application/x-httpd-php .php
    #AddType application/x-httpd-php-source .phps
    AddType application/x-tar .tgz
    # AddHandler allows you to map certain file extensions to "handlers",
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action command (see below)
    # If you want to use server side includes, or CGI outside
    # ScriptAliased directories, uncomment the following lines.
    # To use CGI scripts:
    #AddHandler cgi-script .cgi
    # To use server-parsed HTML files
    #AddType text/html .shtml
    #AddHandler server-parsed .shtml
    AddType text/xml xbl
    AddType text/x-component htc
    # Uncomment the following line to enable Apache's send-asis HTTP file
    # feature
    #AddHandler send-as-is asis
    # If you wish to use server-parsed imagemap files, use
    #AddHandler imap-file map
    # To enable type maps, you might want to use
    #AddHandler type-map var
    </IfModule>
    # End of document types.
    # Action lets you define media types that will execute a script whenever
    # a matching file is called. This eliminates the need for repeated URL
    # pathnames for oft-used CGI file processors.
    # Format: Action media/type /cgi-script/location
    # Format: Action handler-name /cgi-script/location
    # MetaDir: specifies the name of the directory in which Apache can find
    # meta information files. These files contain additional HTTP headers
    # to include when sending the document
    #MetaDir .web
    # MetaSuffix: specifies the file name suffix for the file containing the
    # meta information.
    #MetaSuffix .meta
    # Customizable error response (Apache style)
    # these come in three flavors
    # 1) plain text
    #ErrorDocument 500 "The server made a boo boo.
    # n.b. the single leading (") marks it as text, it does not get output
    # 2) local redirects
    #ErrorDocument 404 /missing.html
    # to redirect to local URL /missing.html
    #ErrorDocument 404 /cgi-bin/missing_handler.pl
    # N.B.: You can redirect to a script or a document using server-side-includes.
    # 3) external redirects
    #ErrorDocument 402 http://some.other_server.com/subscription_info.html
    # N.B.: Many of the environment variables associated with the original
    # request will not be available to such a script.
    # Customize behaviour based on the browser
    <IfModule mod_setenvif.c>
    # The following directives modify normal HTTP response behavior.
    # The first directive disables keepalive for Netscape 2.x and browsers that
    # spoof it. There are known problems with these browser implementations.
    # The second directive is for Microsoft Internet Explorer 4.0b2
    # which has a broken HTTP/1.1 implementation and does not properly
    # support keepalive when it is used on 301 or 302 (redirect) responses.
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
    # The following directive disables HTTP/1.1 responses to browsers which
    # are in violation of the HTTP/1.0 spec by not being able to grok a
    # basic 1.1 response.
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0
    </IfModule>
    # End of browser customization directives
    # Allow server status reports, with the URL of http://servername/server-status
    # Change the ".your_domain.com" to match your domain to enable.
    <Location /server-status>
    SetHandler server-status
    Order deny,allow
    Deny from all
    Allow from localhost localhost localhost
    </Location>
    # Allow remote server configuration reports, with the URL of
    # http://servername/server-info (requires that mod_info.c be loaded).
    # Change the ".your_domain.com" to match your domain to enable.
    #<Location /server-info>
    # SetHandler server-info
    # Order deny,allow
    # Deny from all
    # Allow from .your_domain.com
    #</Location>
    # There have been reports of people trying to abuse an old bug from pre-1.1
    # days. This bug involved a CGI script distributed as a part of Apache.
    # By uncommenting these lines you can redirect these attacks to a logging
    # script on phf.apache.org. Or, you can record them yourself, using the script
    # support/phf_abuse_log.cgi.
    #<Location /cgi-bin/phf*>
    # Deny from all
    # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
    #</Location>
    # Proxy Server directives. Uncomment the following lines to
    # enable the proxy server:
    #<IfModule mod_proxy.c>
    # ProxyRequests On
    # <Directory proxy:*>
    # Order deny,allow
    # Deny from all
    # Allow from .your_domain.com
    # </Directory>
    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
    # Set to one of: Off | On | Full | Block
    # ProxyVia On
    # To enable the cache as well, edit and uncomment the following lines:
    # (no cacheing without CacheRoot)
    # CacheRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\proxy"
    # CacheSize 5
    # CacheGcInterval 4
    # CacheMaxExpire 24
    # CacheLastModifiedFactor 0.1
    # CacheDefaultExpire 1
    # NoCache a_domain.com another_domain.edu joes.garage_sale.com
    #</IfModule>
    # End of proxy directives.
    ### Section 3: Virtual Hosts
    # VirtualHost: If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn't need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
    # for further details before you try to setup virtual hosts.
    # You may use the command line option '-S' to verify your virtual host
    # configuration.
    # Use name-based virtual hosting.
    #NameVirtualHost *
    #NameVirtualHost 12.34.56.78:80
    #NameVirtualHost 12.34.56.78
    # VirtualHost example:
    # Almost any Apache directive may go into a VirtualHost container.
    # The first VirtualHost section is used for requests without a known
    # server name.
    #<VirtualHost *>
    # ServerAdmin [email protected]
    # DocumentRoot /www/docs/dummy-host.example.com
    # ServerName dummy-host.example.com
    # ErrorLog logs/dummy-host.example.com-error_log
    # CustomLog logs/dummy-host.example.com-access_log common
    #</VirtualHost>
    #<VirtualHost default:*>
    #</VirtualHost>
    SetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
    <IfModule mod_perl.c>
    # Perl Directives
    # PerlWarn On
    # PerlFreshRestart On
    # PerlSetEnv PERL5OPT Tw
    # PerlSetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
    PerlModule Apache
    # PerlModule Apache::Status
    PerlModule Apache::Registry
    # PerlModule Apache::CGI
    # PerlModule Apache::DBI
    # PerlRequire
    <Location /perl>
    SetHandler perl-script
    PerlHandler Apache::Registry
    AddHandler perl-script .pl
    Options +ExecCGI
    PerlSendHeader On
    </Location>
    # <Location /perl-status>
    # SetHandler perl-script
    # PerlHandler Apache::Status
    # order deny,allow
    # deny from all
    # allow from localhost
    # </Location>
    </IfModule>
    #Protect WEB-INF directory
    <DirectoryMatch /WEB-INF/>
    Order deny,allow
    Deny from all
    </DirectoryMatch>
    # Setup of FastCGI module
    <IfModule mod_fastcgi.c>
    Alias /fastcgi/ "E:\oracle\product\10.1.0\Companion\Apache\fastcgi/"
    ScriptAlias /fcgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin/"
    <Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin">
         AllowOverride None
         Options None
         Order allow,deny
         Allow from all
         SetHandler fastcgi-script
         <IfModule mod_ossl.c>
         SSLOptions +StdEnvVars
         </IfModule>
    </Directory>
    </IfModule>
    # Include the configuration for Apache JServ 1.1
    #include "E:\oracle\product\10.1.0\Companion\Apache\Jserv\conf\jserv.conf"
    # Setup of oprocmgr module.
    # This directive identifies each remote apache instance that will be
    # sending requests to processes (e.g., JServs), managed by local Apache
    # instances. This directive is used by the local process manager to share
    # routing information with remote apache instances via non-SSL HTTP messages.
    # The directive is repeated for each remote apache instance that will be
    # sending requests. The ProcNode directive that refers to the local apache
    # instance will be ignored, but may be supplied to facilitate uniformity
    # in configuration across apache instances. Arguments to the ProcNode must
    # be sufficient to reach the remote instance of apache via non-SSL HTTP
    # messages. It is not considered an error if the remote apache instance is
    # unreachable, as no assumption is made about the starting order or
    # availability of apache instances.
    # Syntax: ProcNode <hostname> <port>
    # Example: ProcNode abc.com 7777
    <IfModule mod_oprocmgr.c>
    <Location /oprocmgr-service>
    SetHandler oprocmgr-service
    Order deny,allow
    Deny from all
    Allow from localhost localhost localhost
    </Location>
    <Location /oprocmgr-status>
    SetHandler oprocmgr-status
    Order deny,allow
    Deny from all
    Allow from localhost localhost localhost
    </Location>
    </IfModule>
    # Include the mod_oc4j configuration file
    include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_oc4j.conf"
    # Include the mod_dms configuration file
    include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\dms.conf"
    # Loading rewrite_module here so it loads before mod_oc4j
    LoadModule rewrite_module      modules/ApacheModuleRewrite.dll
    # Include the SSL definitions and Virtual Host container
    include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\ssl.conf"
    # Include the mod_osso configuration file
    #include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_osso.conf"
    # Include the Oracle configuration file for custom settings
    include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\oracle_apache.conf"
    ------------------------------------------------------------------------------------------------------------------

    Firstly, there's no such thing as Apache 9.3, there's Apache 1 (and subversions) and Apache 2 (and subversions). Your error message -
    Oracle-HTTP-Server/1.3.28Shows you're using Apache 1.3.28
    Secondly, I'm confused by your comment -
    I do not have Apache 9.3 or higher but I think oracle should offer this in its companion CDOracle does offer the Apache server, if you're saying you didn't get it from Oracle then where did your Apache server come from?
    Thirdly, I notice from your config file -
    ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"That you're piping the logs through rotatelogs, are you sure the logfiles haven't just been renamed?

  • Upload problems with Facebook and Vimeo from Premiere Elements 10

    I have created a project in HD and am trying to upload to Vimeo.  Premiere Elements 10 does not have a preset so I followed some instructions from the Vimeo website.  Project is "blurry" when viewed.  I checked with Vimeo and they said what they converted matches what I sent so the problem must be in the export - bit rate may be incorrect.  Can anyone give me the correct presets for Vimeo from Premiere Elements 10.  I can view other people's video in HD and they look fine so I don't think it's my computer monitor.   I'm sure you will need more information about my project so please give me a list of specific things you need to know.  Thank you.
    My Facebook problem is as follows.  If I use the preset from Premiere Elements 10 to upload to Facebook it looks fine, HD quality as expected.  Problem is, I would like to upload to my business page.  Since the personal page and the business page (managed by my personal account) share a login, the preset always loads to my personal page.  Does anyone know the values of the preset so I can upload the video to my business page.  My business is event and wedding videography so I would like the posts to be as clear as possible.
    If the problem with the Vimeo uploads is solved then I suppose I can just share the Vimeo file on Facebook.  Thank you.

    VDRAVES
    I think that you are overlooking what you already have with regard to a Vimeo HD preset for export to file for upload of the saved file at the Vimeo website.
    Please see
    Share/Computer/AVCHD with Presets = Vimeo HD
    Under the Advanced Button/Video Tab, you can customize the preset further from 1280 x 720 to 1920 x 1080 and increase the bitrate, if necessary, to a level that does not give you a prohibitive file size. With Profile = Main and Level = 3.1, the bitrate range is 0.19 to 14 Mbps (megabits per second).
    I would start with the default bitrates of Target = 8 Mbps and Maximium = 9 Mbps and explore and experiment from there.
    If you customize the preset to 1920 x 1080 in the Export Settings customization area, then change the Profile to High and the Level to 5.1
    When you do that the bitrate range will be 0.19 to 300 Mbps instead of 0.19 to 14 Mbps.
    In all cases, watch for file size versus bitrate versus quality of end product.
    Please give that a look and then let us know if the above resolves your Vimeo and Facebook question.
    Please review and let us know the outcome.
    Thank you.
    ATR

  • Problem with String variable

    I am new to Java Programming.
    I have a line of code that works and does what is supposed to.
    faceData.getProfile("Lisa").removeFriend("Curtis");
    If I assign the strings to variables such as-
    String name = "Lisa";
    String fName = "Curtis";
    and then plug those into the same line of code, it does not work
    faceData.getProfile(name).removeFriend(fName);
    What could be causing the problem?
    I even added some lines to print out what is stored in the variables to verify that they are what they should be, but for some reason the variables do not work while putting the strings in quotes does. Any ideas?

    I guarantee that something about your assertions are incorrect. Those variables are either not equal to the values you claim, or something else is going on. But it's not a problem with string variables versus string constants.
    Edit: My best guess in lack of a real example from you, is that the strings in question have non-printable characters in them, such as trailing spaces or line feeds.

  • Problem with wifi network.

    I've had my macbook pro for a little under a month and have had no problems with it up until this weekend. The problem is this; whenever I try to log onto a wifi network, the computer says that I'm connected but when I go to open Safari it says that I'm not connected to the internet. I've run a network diagnostic and it says that nothing appears to be wrong with the connection. Usually if I turn off my wifi and turn it back on I can get my connection to work but it usually takes a few tries. I've had the same issue both at my house and my parents' so the issue seems to be with my computer versus with a specific wifi network...any suggestions?

    System Preferences > Network > WiFi/Airport > ( Assist me ) ...
    ... only this time, choose Set up again from scratch, including a new Location and answer the questions to set everything up again.

  • Problem with getLastChild() and xsl:comment / nodes

    Hi list,
    the problem I'm facing at the moment is as follows (using org.w3c.dom.*):
    in my DOM I have fragments of the following:
                    <a accesskey="2" class="namedanchor" name="content">
                        <!---->
                        <span class="test">.</span>
                    </a>in my program my code looks like this:
    while(current.getLastChild() != null)
                        current = current.getLastChild();suppose the node "current" is the anchor node in the above example (with sub nodes: <xsl:comment /> written as <!---->, a span node with attribute class and attribute value "test" and this span node has a childnode - a textnode with the value ".")
    If the while loop has the current node being the anchor node it doesn't proceed - it ends up in the anchor node itself, but it should end up in text node with value ".".
    Does anyone have a clue whats the problem with the <xsl:comment /> in this case??
    thanks for your help
    HTH
    silentium

    The last child of that <a> element (that's what you meant by "anchor node", right?) is a white-space text node. Regardless of whether any of its earlier children happen to be comments. (And even though I couldn't understand all that hand-waving about <!> versus <xsl:comment>.)

  • In desperate Need of support of an all too common problem with the xt912's

    https://vzwsupport.jive-mobile.com/#jive-discussion?content=%2Fapi%2Fcore%2Fv2%2Fdiscussions%2F808263
    First off,i tried to reply to the above link/thread,because my issue is IDENTICAL,so this below post,is what i tried to wright into the reply,though it wouldn't work...
    Hello, Please forgive me rehashing an old thread, but due to the fact that this is the identical-odd situation needed to reply to this....
    We have the xt912 and just got it back on refurb, for another one that had this identical problem. So we have had 3 of these,and two have had this same horrible issue.And it already is having these problems and we just got it not long ago....The hdmi/rotate-screen issue IDENTICAL to this....
    We have already had another Xt912 with the same exact issues,so no offense,this problem is getting very old.
    Could you please check my imei (it’s my sons phone) and possibly see if there is something you can do for us?  the phone is at the point to where it’s not safe for my son, as he needs to call us from his middle school sometimes, but it’s to the point to where this isn't even working anymore. The screen won’t turn and the dock message keeps coming up. I've tried 4+ hard resets, And these droids are getting very disheartening...   Especially with how much money we spend with you, versus some of our straight talk phones...
    Please let me know, and many thanks
    My name is Jacob and its best to reach me at my email (removed)
    Private info removed as required by the Terms of Service.
    Message was edited by: Admin Moderator

        dovedescent7,
    I am sorry to hear that you are having problems with your son's phone. I know you stated that you have reset his phone many times. Have tried running the device in Safe Mode? http://vz.to/JOEri7 are the steps to put it in Safe Mode. Safe Mode tells us if it is an application error or the device.
    Thank you,
    RobinD_VZW
    Follow us on twitter@VZWSupport

  • Graphics Corruption in Some Apps - Problem with Geforce GT750

    Hi
    I am recently facing a graphics corruption problem with my 2013 MBPr. Yesterday I noticed that the window that shows the mail in Mail.app suddenly showed just some noise (just some strange colors). I restarted the app and it was gone. Then I installed a game named "Tales from the Borderlands". On the menu of the game I noticed the corruption again. Every time I would exit and rerun the game, the distortion would randomly change. Here are some examples:
    The problem appeared throughout the game too.
    Then I forced "Integrated Only" using a gfxCardStatus to use Intel Iris Pro instead of Geforce GT750. I started the game and the problem was gone. I tried some more times again by switching GPUs and every time I noticed that the problem is with Geforce GT750 and Intel Iris Pro has no problem.
    Any ideas what is causing the problem and what should I do? Thanks in advance for any help.

    Hi Tormirez,
    I can't believe my eyes.. I actually was afraid this might happen.
    Since I've been following the 2011 MBP forum after i had my MBP repaired (reflow by someone near Antwerp, Belgium), I've been learning some specific things about the very likely nature of these GPU issues.
    All these issues seem to be related to the replacement of leaded solder by nearly pure tin solder + not soldering according to the best profile (temperature vs time).
    The factor of time saving = money saving may very well play a role here.
    When you consider the nature of that leaded solder problem versus the soldering profiles, it's not hard to imagine that the problem isn't just in the 2011 model range, but may actually have started FROM that range...! I've already heard that some 2012 models also failed in a similar way.
    It may all be quite logical; tin solder needs a roughly 60ºC higher temperature to get into full liquid state then leaded solder.
    As the cheapest way to produce boards is probably rolling entire boards through ovens, melting the parts on it, it would require very precise monitoring of temperatures UNDER the CPU and GPU, to be SURE you have a full flow going on.
    But, at the same time, as you're cooking ALL components around 240ºC, they may have chosen not to stay at this temperature long enough. Or, maybe they stop at 240ºC, while 242ºC might be the minimum required temperature to guarantee full flow.
    Etc.. It's a very complicated mix of factors that determines if small or large batches of board could contain errors at all or not.
    But it may at least be called "bizarre" that these solder errors are found in tens of thousands 2011 MBPs, but also in 2012 models, and in the PS4 and also other brand Windows PCs!!
    If you want to test your GPU hard, download GpuTest OSX x64 0.7.0 from ( geeks3d . com / gputest ) and run the FurMark based stress test on HD resolution for 30-60 mins straight, then turn your machine off completely for 15-30 mins (until it's really cold, put it down on some cold stone floor might help), then repeat several times.
    If the same problem would be hidden in there as in the 2011 models, this is the way to get it triggered soon.
    If you ask me, this might be the first report of the same problem in the 2013 series.....
    Question; do you game a lot? If you answer yes, then it would pretty much make a connection to this similar problem I think!
    I'm curious about the results of the stress test!

  • Problems with UK deliveries

     <font face="comic sans ms,sans-serif" size="3">Does anyone else have problems with deli'veries via DPD UK (ex Parceline)?
    <font face="Comic Sans MS" size="3">?
    <font face="Comic Sans MS" size="3">I have confirmation from Creative that two orders (made on different days) have shipped. The provided consignment information registers on the DPD tracking service but gives no deli'very information other than stating the shipping is by their 2 day service. Both orders are now overdue by any standard.
    <font face="Comic Sans MS" size="3">?
    <font face="Comic Sans MS" size="3">On calling DPD they deny ever receiving any consignments. On calling Creative they claim that "a pallet has gone missing and we are looking into it". Now clearly as the orders were made on different days the likelyhood of them being on the same pallet is remote to say the least so stories from either party have more than a faint aroma of BS about them.
    <font face="Comic Sans MS" size="3">?
    <font face="Comic Sans MS" size="3">In the UK Parceline had a notorious reputation for poor service. Their response to this was to change their name (unfortunately not their ways it seems). I am somewhat surprised that a company like Creative would risk their reputation by using such a supplier.
    <font face="Comic Sans MS" size="3">?
    <font face="Comic Sans MS" size="3">Of course Creative have my money so their concern about deli'very may not be as pressing as mine.
    <font face="Comic Sans MS" size="3">?
    <font face="Comic Sans MS" size="3">Do others have similar experiences?
    <font face="Comic Sans MS" size="3">?
    <font face="Comic Sans MS" size="3">Cheers!
    <font face="Comic Sans MS" size="3">?
    <font face="Comic Sans MS" size="3">Andy

    -----Oorspronkelijk bericht-----
    Van: Chris Nierop [mailto:[email protected]]
    Verzonden: maandag 28 juni 2010 13:32
    Aan: [email protected]
    Onderwerp: RE: [DVD Lounge] Re: Problems with UK PAL DVDs playing overseas
    I think it is not the PAL versus NTSC that makes the problem as described in this forum earlier.
    In Europe we have PAL, but we can play NTSC also on our DVD players. Our players (and TV sets) are compatible to both PAL and NTSC.
    What makes the problem is the region code. In Europe we have code 2 and in the US you have code 1.
    For a region free DVD the code 0 is given.
    So you have to look at the DVD that you will purchase in which code the DVD has been made. Is it code 1 than you have to need to have a player who accept region 1 code or a region free player.
    If the DVD has code 2 than you cannot play it on a American players, made with code 1, or this player is a region free type.
    Most players have the region code build in the software of the player and you can make region free if you know the software code to do so. If the code has been cracked many shops do it for you for a little amnount of money (in the Netherlands that is). It the code is not known than it is not possible to encode the player to a region free type.
    Some players have a region code build into the hardware (as the Sony types), and it is almost not possible to change the code.
    When you make a mistake in the software encoding than it is possible that the player will not function correctly anymore, and every type has its own softwarecode, even within a certain fabricate. So it is a bit tricky to do.
    On the internet you can search if the player you have has a possibility to encode the player into a regionfree type. Many hobbyist have found the software encoding method to do so and make that public on the internet. Simply use Google or so to find out, or ask your local shop if they can do it for you.

  • Video card or driver problems with an N200, please help!

    I have a lenovo 3000 N200, it is really cool, runs even games quite well, including newer ones.
    But, is it normal to for the display driver program to freeze out in Warcraft 3? It always does that, when accessing the list of maps in the game and after 3-5 mins during an actual game. It sets the resolution down to 640X480 (from 1280X800) and in 16 color. I have to reset it in order to make it work. Also it does the same in Spore - though after having the driver written for Spore installed, ( which I downloaded from lenovo's site ) I haven't encountered that problem so far. Also Second Life shuts down - thankfully it does not freeze the drivers. I understand that the model I have is not meant for gaming but if it can run Warhammer 40k: Soulstorm at meduim graphic settings (on widescreen) without a lagg I can't understand why it wouldn't be able to handle warcraft 3 - that even an ATi m200 express can handle. I mean an X3100 from Intel must be far more powerful. (Said ATi card laggs with older games like Unreal Tournament)
    I have the latest driver - official - and a Win Xp pro Sp2. I always keep my system up to date - save for opsys but so far driver did not need sp3 - and virus clean.
    Please help me? 
    Solved!
    Go to Solution.

    Well, Unreal Tournament 2004 runs flawlessly on max graphics - though simple Unreal Tournament laggs like hell with all possible settings - also, as I said Dawn Of War and it's expansions run well on med graphics. The Suffering Ties That Bind runs also good on highest settings - though there is a bit of degradation compared to my tabletop pc's performance. Disciples 2 ran - of course - well, there were some texture problems with it but Heroes 5 ran quite well even on higher settings (as I mentioned it sometimes blunted down the textures but not always and it ran without a lagg). Alien Versus Predator 2 ran on max graphics, and there was no trouble, save for the aliens' special vision (that white thing that looks as if inverted colors) didn't work - aka was only a black screen - and that the crosshair of the smartgun was only a blank red/green block on the middle of the screen.Oh, and Command & Conquer: Generals Zero Hour works on highest settings without a lagg, along with Quake 3, and Jedi knight : Academy. It even runs Perfect World on high settings and only laggs in bigger towns - but that also might be because of the tremendous bandwidth usage that occurs. Even Red Alert 3 was able to run, but I would only advise that for RA fanatics, on low settings it was playable. Also, C & C: Tiberium Wars runs better than RA 3 , if you like that it is quite playable and worth a try. As you can see I have put it to it's limits to see what it can endure. Unreal Tournament 3 ran, though was gruesomely degraded and then it gave me the blue screen of death; so I quickly uninstalled that. Other than the forementioned program I had no real problems with the card, but the existing problems are a pain in the ... well we all know how bothering it can be when one is unable to play his/her favourite game (that should really run flawlessly).
     Doesn't vista eat up too much of the system resources? A friend of mine was complaining about his n200 that vista is too slow on it and it eats up too much processor/memory.
    Also, still no new on videocard front... Asked around if anyone knows, but I am guessing that maybe even Blizzard - referring to my Warcraft problem - shows more compassion to their forums and users than Lenovo, so I'll ask around there too. 

  • Is anyone else having problems with zoom in ios 8?

    I just installed ios 8 on my iPhone 5, and honestly, I am not thrilled with the
    results. I am visually impaired and rely heavily on the zoom feature. The
    reaction time to the three-finger tap in ios 8 now seems sluggish, swiping
    around to move the view feels like pulling my fingers through mud, and the
    image doesn’t move as smoothly as before. Previously, I could swipe with three fingers
    to move my view, and after I lifted my fingers, it would glide smoothly, coming
    to a gentle stop after a moment, in a similar way as swiping to scroll works in
    contact lists and long messages. This meant I could read something while it
    moved, without my fingers in the way.
    Now the image moves much more quickly and then comes to a sudden halt
    after a second, as if it hit a wall. I have to keep putting my fingers down,
    almost clawing at my screen to move it around. It is extremely frustrating.
    Honestly, it now feels like the zoom feature in recent Android phones. It’s a
    very subtle difference, and it/s a little better when “ follow focus” is off.

    I have problems with many of the same issues you mention with zoom on iOS8.  Its not entirely clear if this is intended functionality or a number of bugs.  The setting for full screen view versus window/regional view seems to not apply globally, which is insanely frustrating.  Window view pops up without warning, particularly in a keyboard pop-up event.
    I don't particularly liek the popup menu either, but now I HAVE to use it to constantly change from the sudden change to window focus to full screen zoom.
    Some of the new filter features are nice additions, but don't seem to work well. or be performance optimized.  Low-light, for example, stutters on zooming.
    I would also assert that zooming in and out seems more abrubpt and less accurate.
    iOS8 is definitely a decrease in usability and performance from its predecessors.  Apple, please work out the bugs and get this right!

  • Is anyone else having problems with Apertures Date fields?

    After experiencing a sysems failure I began restoring my images from backups.  I have had no end of problems with Image dates.  I have come to the determination that Aperture is NOT using either the "Create Date" or "DateTimeOriginal" as the image "Date" or "Date Created" data if other fields have other dates.
    Here is a clip from my image metadata using exiftool:
    File Modification Date/Time     : 2012:09:23 19:53:15-04:00
    File Access Date/Time           : 2013:01:16 11:34:38-05:00
    File Inode Change Date/Time     : 2013:01:16 11:31:32-05:00
    Create Date                          : 2006:02:20 11:51:12.10
    Date/Time Original              : 2006:02:20 16:51:12.10
    Modify Date                          : 2006:02:20 11:51:12.10
    And here is what Aperture utilized on import
    Date:                               9/23/12 7:53:15 PM EDT
    Date Created                         9/23/2012 7:53:15 PM
    So Aperture utlized the File Modification Date/Time as the Create Date despite that the fact that the Create Date field is present and is properly formatted in the original image.
    According to the Aperture mapping table, this shouldn't be happening.
    Now, before someone recommends that I use Aperture's Date Adjust utility - I'm talking about  slightly over 30,000 images.  Editing images one at a time, or in blocks when you don't know what field Aperture is using as the Create Date would require individual inspection of each image followed by manual adjustment of each image.  That approach isn't acceptable.

    Hmm ok, let me restate the issue then, I thought I was clear.  I could have pointed out in my original post however, that only the EXIF and IPTC date fields were displayed from the metadata dump.
    The data set presented in my first post is the EXIF dataset from the file which clearly shows the image was captured by digital camera at
    Create Date                          : 2006:02:20 11:51:12.10
    Date/Time Original              : 2006:02:20 16:51:12.10
    (The delta of 5 hours is the result of Zulu versus local time offset)
    But, when I ingested it into Aperture, the import routine utilized the IPTC field
    File Modification Date/Time     : 2012:09:23 19:53:15-04:00
    which is updated by the OS whenever you move the file around outside of Aperture. (a number of image data fields are updated by the OS - filename for example is another.).  This resulted in the image date fields being stamped in Aperture as:
    Date:                               9/23/12 7:53:15 PM EDT
    Date Created                         9/23/2012 7:53:15 PM
    Which obviously came form the File Modification Date/Time field and not (either) the Create Date or Date/Time Original fields.

  • Problems with uVerse DVR connected to a network switch and 1x3 HDMI switch

    So that I can connect multiple devices (Apple TV & BluRay player), I've connected my uVerse DVR to a network switch with IP Quality of Service function.  Is it known whether or not this will cause problems?  I am having problems, but see next question for probable cause. I have also connected my HD TV to a 1x3 HDMI switch output, with inputs from the uVerse DVR, Apple TV, & BluRay player.  This clearly has caused problems because the DVR goes through the power on sequence almost everytime the TV is turned on, I have intermittent problems with the HDMI switch displaying video on the TV, and on several occassions, shows scheduled for recording haven't recorded at all or only partially recorded.

    I've been having problems with this for months especially with the GigaPower rollout and broke down and decided to resort to some network engineering tactics versus calling out AT&T Techs. The Techs are good at their job but they are only knowledgeable about the hardware aspect but are dumb founded on this one and it's not their job to know.  To the point of using a switch next to the DVR and this counts truly for all set top boxes via Ethernet they need to be physically seperated wires. Well, unless you want to pay someone to put an extra Ethernet drop next to each wired set-top box or DVR this isn't feasible so options are deal with it or spend $20 more dollars on a switch that supports 802.1q trunking which makes two 'virtual' independent ethernet cables over one line.  If you can do it great otherwise this takes a higher than average knowledge of basic networking.   A basic setup would be: + Get two switches - Netgear GS108T or GS108E I've found does the job well. + Enable 802.1q advanced VLANs+ Make two additional vlans 2 and 3 (1 is the native VLAN)+ Mark a port as tagged 'T' for the trunk port to the other switch for VLANS 1,2,3 (I used port 8)+ Assign VLAN 2 and mark as untagged for ports 2-7 - this is for data traffic+ Assign VLAN 3 and mark as untagged for port 8 only - this is for video multi-cast traffic+ ***DISABLE*** MULTI-CAST IGMP SNOPING otherwise IPTV won't work. On the back of the Uvserse router, take an Ethernet wire and plug into port 8 and take an Ethernet cable and plug into port 7.  This does not create a loop though sounds like it, we've created two unique layer 2 networks.  Now configure the second Netgear switch (or switch of your choosing...) the same exact way but plug your DVR into port '8' and all your data stuff XBox, whatever... into ports 2-7. Whalla, you've eliminating multi-cast flooding and DVR traffic is independent.  Ever since I started doing this I increased the speed throughput from 10 MB/s or to never working to a full reliable gigabit speed or respectibly whatever UVerse service you get.    

  • Problems with T60p

    Hello,
    I've got a problem with my display. After a view seconds in runtime my display switches very dark. Looks like as it is off.
    But the System is currently running. If I'm lightning the display I can see a little bit of my Desktop. What can it be ?
    The Bios is flashed to v2.23 OS is Windows Vista Ultimate Display Driver is also the newest.
    This problem starts by updating the Adobe Acrobat Reader 8.0.
    I can go to R&R-, in Bios- or in OS Screen, its all the same. Display is going dark after a view seconds.
    Is there a hardware part broken ?
    Sorry for my English -.-

    15.1 ?? is that 14.1 or 15 inch??
    This means that the CCFL needs to be replaced you can try to do it, which costs like 20 dollars for a new CCFL tube versus 300+ dollars for a new screen. 
    You can check out forum.thinkpads.com regarding how people did it. I know Harryc the mod on that forum actually changed a CCFL tube on his R51 or R52 a while back, so i think you could post a message there asking for tips on how to change the CCFL.
    If you don't have the time then you can buy the whole LCD and swap it out.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

Maybe you are looking for

  • Can I use iTunes files on a non-Apple device?

    Hi all I have a bit of a random question I was hoping someone could answer. I have a 120GB iPod, and I´ve got an iTunes account with a bit of cash in it, ready to spend on a few movies. HOWEVER, the catch is that I´m actually travelling around South

  • Adobe Photoshop CC and Cs6  not starting up on PC

    I am able to use  premiere pro and after effect but cannot get  either illustrator or photoshop cs6 or cc to work. information that I get at start up is Problem signature:   Problem Event Name:          APPCRASH   Application Name:          Photoshop

  • List of Queries/Workbooks in old version (3.5)

    Dear experts, I'd like to get a list of all queries and workbooks still beeing used in the old version (3.5). I'm looking for information like: ID, Name, Version, LastUsed, Creator, User ... Is there a way to enable the old frontend tools ( BeX, Quer

  • Patch set 11.1.0.7 applied but repository does get upgrades

    Hi, My database version is 11.1.0.6 i applied recent patch set which is 11.1.0.7 and upgraded the database using database upgrade assistant. everything went successfully. but when i login the owb designer says your repository version is 11.1.0.1 when

  • RFC communication to presentation sever in background mode

    I need to download data in background mode to a presentation server.  I found documentation from 2005 regarding this process and have successfully set up an RFC to send the data.  In my ABAP program, I use RFC_REMOTE_FILE to send an internal table of