PROBLEMS WITH WEBI REPORTING FORM BW DATASOURCE

Hi Experts,
We need some help here !
I installed BOXI 3.1 with SAP Integration Kit, also Installed transports on SAP BW 7 following the installation guide, OS= Solaris 10 . We already put all the authorizations as the documentation says, and started to make a universe on a top a BEx Queries and directly on top Infocube, the universe is generated automatically OK ! , in both cases.
Then we export them and publish them OK, but here is the issue: When we try to create a simple report with no more than tow dimensions and one ratio, the report don´t data returns at all !
Could be an Autorizations issue ? Transports ? SAP Integration Kit Issue??
Thanks for your ideas !!
Hugo

Hi Hugo,
can you provide the calculation the ratio you mentioned? I assume we are talking about a calculated figure on SAP BW or a formula added in the Query designer. If you have access to the individual components of the calculation in the universe, just try to build a simple report only with those and see if data are displayed.
Furthermore would be great to check what happens when you let the query run in the SAP BW query designer. Do you have at least on entry (dimension) in the Rows section and at least the ratio in the columns section there? Do get data displayed when you let the query run in BEx Analyser for the same parameter set that you are using in your WebI?
I also may be helpful to know which support package is currently installed on your SAP BI system.
Regards,
Stratos

Similar Messages

Problem scheduling webi reports with XI3.1 pending forever

Hello,
I've got a problem scheduling webi reports with XI3.1 scheduler.
After confiming scheduling job (loggin in with "administrator" user), status remains "pending" forever(using Infoview or CMC).
I tried different job recurrence a modalities (attachment formats, destination user etc).
I also try to add (-javaArgs "Xmx900m,Xincgc,server") wich is the SAP solution found on its portal but it does not work.
I use BO XI 3.1 in Windows 2003 server, after the install I reduced the maximum memory of Java in the tomcat 5.5.2 server from 1024 to 512 because the server never started with the initial size.
Please I need Help.
thanks in advance,
Samy

Hi,
Below SAP solution found found in BOB Forum.
I applied this solution and now everything works fine !!
I just add this -javaArgs "Xmx900m,Xincgc,server" in the command line of the server
Hope this helps:
Symptom
Scheduled WebIntelligence reports remain stuck in 'pending' status after installing Microsoft windows patches of April 2009. Restarting the Adaptive Job Server, Central Management Server or Server Intelligence Agent has no effect.
The Event Viewer logs show the following entry: Unable to start the sub-process (Job Server Child). Cause : Couldn't get IJob interface or writing IAudit: Pipe exception. Reason: jobserverchild (WebIJavaSchedulingService ReplicationSchedulingService, 0, Timeout waiting for Child [4716] to register ([120]seconds).
Reproducing the Issue
Install Business Objects Enterprise XI 3.x on a French Windows 2003 SP2 32bits server
Install the following Microsoft windows update patches of April 2009:
KB923561, KB925336, KB952004, KB956572, KB959426, KB960225, KB960803, KB961373, KB967715
Schedule a WebIntelligence report
The report remains in Pending status
Business Objects Enterprise XI 3.1
Windows 2003 SP2 32bit (French)
Microsoft windows patches of April 2009
Cause
With Microsoft windows patches of April 2009, the maximum Heap Size for java processes has been reduced to under 1000MB.
Resolution
Apply the following steps to fix the issue:
Launch the Central Management Console
Select Servers
Right click on <server_name>.Adaptive Job Server and select Properties
Add the switch -javaArgs "Xmx900m,Xincgc,server" in the command line of the server
Click on Save and Close
Restart the <server_name>.Adaptive Job Server
Regards .
Sam.
Edited by: samouber on Aug 21, 2009 2:54 PM

Report viewer "Go To Next Page" button always load Page2 with Crystal Reports Runtime version 10.0.10. No problem with Crystal Reports Runtime version 10.0.5

Report viewer "Go To Next Page" button always load Page2 with Crystal Reports Runtime version 10.0.10. No problem with Crystal Reports Runtime version 10.0.5.
NOTE: I did not check other Crystal Runtime versions.
Any solution?

Visual Studio Premium 2012.
It is a web application.
It was working fine with Crystal Report version 13.0.5. Only change is uninstall Crystal Report version 13.0.5 and install Crystal Report version 13.0.10
Entering page number works fine to view that page Request.Form parameters sample for that (change page from page 3 to page 5):
__CRYSTALSTATEviewer:{"0":{"rptViewLabel":"Ana Rapor", "gpTreeCurrentExpandedPaths":{}, "vCtxt":"/wEXAwUVSXNMYXN0UGFnZU51bWJlcktub3duZwUOTGFzdFBhZ2VOdW1iZXICBQUKUGFnZU51bWJlcgIC", "pageNum":2}, "common":{"width":"100%", "Height":"100%", "enableDrillDown":true, "drillDownTarget":"_self", "printMode":"Pdf", "displayToolbar":true, "pageToTreeRatio":6, "pdfOCP":true, "promptingType":"html", "viewerState":"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", "rptAlbumOrder":["0"], "toolPanelType":"GroupTree", "toolPanelWidth":200, "toolPanelWidthUnit":"px", "iactParams":[{"paramName":"pFromDate", "description":"From Date", "valueDataType":"d", "value":[{"d":9, "m":4, "y":2014, "h":0, "min":0, "s":0, "ms":0}], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pToDate", "description":"To Date", "valueDataType":"d", "value":[{"d":9, "m":6, "y":2014, "h":0, "min":0, "s":0, "ms":0}], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pGroupBy", "description":"Group by", "valueDataType":"n", "value":[2], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"Boardtype"}, {"value":2, "desc":"Room type"}, {"value":3, "desc":"Rate Room type"}, {"value":4, "desc":"Rate code"}, {"value":5, "desc":"Guarantee code"}, {"value":6, "desc":"Adults"}, {"value":7, "desc":"Children"}, {"value":8, "desc":"Market code"}, {"value":9, "desc":"Source code"}, {"value":10, "desc":"Channel code"}, {"value":11, "desc":"Country"}, {"value":12, "desc":"Nationality"}, {"value":13, "desc":"Created by"}, {"value":14, "desc":"Adult+Child"}, {"value":15, "desc":"Agency"}, {"value":16, "desc":"Company"}, {"value":17, "desc":"Source"}, {"value":18, "desc":"Group"}, {"value":19, "desc":"Micros Discount"}, {"value":-1, "desc":"None"}], "defaultDisplayType":1}, {"paramName":"pDistributionBy", "description":"Distribution by", "valueDataType":"n", "value":[1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"RN"}, {"value":2, "desc":"ARR"}], "defaultDisplayType":1}, {"paramName":"pShowDetails", "description":"Show details", "valueDataType":"b", "value":[true], "allowCustomValue":false, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":true}, {"value":false}], "defaultDisplayType":1}, {"paramName":"pSubGroupBy", "description":"Sub Group", "valueDataType":"n", "value":[-1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"Boardtype"}, {"value":2, "desc":"Room type"}, {"value":3, "desc":"Rate Room type"}, {"value":4, "desc":"Rate code"}, {"value":5, "desc":"Guarantee code"}, {"value":6, "desc":"Adults"}, {"value":7, "desc":"Children"}, {"value":8, "desc":"Market code"}, {"value":9, "desc":"Source code"}, {"value":10, "desc":"Channel code"}, {"value":11, "desc":"Country"}, {"value":12, "desc":"Nationality"}, {"value":13, "desc":"Created by"}, {"value":14, "desc":"Adult+Child"}, {"value":15, "desc":"Agency"}, {"value":16, "desc":"Company"}, {"value":17, "desc":"Source"}, {"value":18, "desc":"Group"}, {"value":19, "desc":"Micros Discount"}, {"value":-1, "desc":"None"}], "defaultDisplayType":1}, {"paramName":"pIncludeDayUse", "description":"Include Day Use", "valueDataType":"b", "value":[true], "allowCustomValue":false, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":true}, {"value":false}], "defaultDisplayType":1}, {"paramName":"pDateType", "description":"Date Type", "valueDataType":"n", "value":[1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pCompHuse", "description":"Comp-Huse", "valueDataType":"n", "value":[0, 1, 2], "allowCustomValue":true, "allowMultiValue":true, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pOrderBy", "description":"Order By", "valueDataType":"n", "value":[2], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}], "paramOpts":{"numberFormat":{"groupSeperator":".", "decimalSeperator":","}, "dateFormat":"d.M.yyyy", "timeFormat":"H:mm:ss", "dateTimeFormat":"d.M.yyyy H:mm:ss", "booleanFormat":{"true":"True", "false":"False"}, "maxNumParameterDefaultValues":"200", "canOpenAdvancedDialog":true}, "zoom":100, "zoomFromUI":false, "lastRefresh":"9.7.2014 17:47:04"}, "curViewId":"0"}
viewer_toptoolbar_search_textField:Bul...
text_viewer_toptoolbar_selectPg:5
text_viewer_toptoolbar_zoom:100%
__CALLBACKID:viewer
__CALLBACKPARAM:{"tb":"gototext", "text":"5"}
Try to view New Page does not work. Request.Form parameters sample for that (try change page from page 2 to page 3):
__CRYSTALSTATEviewer:{"0":{"rptViewLabel":"Ana Rapor", "gpTreeCurrentExpandedPaths":{}, "vCtxt":"/wEXAwUVSXNMYXN0UGFnZU51bWJlcktub3duZwUOTGFzdFBhZ2VOdW1iZXICBQUKUGFnZU51bWJlcgIC", "pageNum":2}, "common":{"width":"100%", "Height":"100%", "enableDrillDown":true, "drillDownTarget":"_self", "printMode":"Pdf", "displayToolbar":true, "pageToTreeRatio":6, "pdfOCP":true, "promptingType":"html", "viewerState":"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", "rptAlbumOrder":["0"], "toolPanelType":"GroupTree", "toolPanelWidth":200, "toolPanelWidthUnit":"px", "iactParams":[{"paramName":"pFromDate", "description":"From Date", "valueDataType":"d", "value":[{"d":9, "m":4, "y":2014, "h":0, "min":0, "s":0, "ms":0}], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pToDate", "description":"To Date", "valueDataType":"d", "value":[{"d":9, "m":6, "y":2014, "h":0, "min":0, "s":0, "ms":0}], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pGroupBy", "description":"Group by", "valueDataType":"n", "value":[2], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"Boardtype"}, {"value":2, "desc":"Room type"}, {"value":3, "desc":"Rate Room type"}, {"value":4, "desc":"Rate code"}, {"value":5, "desc":"Guarantee code"}, {"value":6, "desc":"Adults"}, {"value":7, "desc":"Children"}, {"value":8, "desc":"Market code"}, {"value":9, "desc":"Source code"}, {"value":10, "desc":"Channel code"}, {"value":11, "desc":"Country"}, {"value":12, "desc":"Nationality"}, {"value":13, "desc":"Created by"}, {"value":14, "desc":"Adult+Child"}, {"value":15, "desc":"Agency"}, {"value":16, "desc":"Company"}, {"value":17, "desc":"Source"}, {"value":18, "desc":"Group"}, {"value":19, "desc":"Micros Discount"}, {"value":-1, "desc":"None"}], "defaultDisplayType":1}, {"paramName":"pDistributionBy", "description":"Distribution by", "valueDataType":"n", "value":[1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"RN"}, {"value":2, "desc":"ARR"}], "defaultDisplayType":1}, {"paramName":"pShowDetails", "description":"Show details", "valueDataType":"b", "value":[true], "allowCustomValue":false, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":true}, {"value":false}], "defaultDisplayType":1}, {"paramName":"pSubGroupBy", "description":"Sub Group", "valueDataType":"n", "value":[-1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":1, "desc":"Boardtype"}, {"value":2, "desc":"Room type"}, {"value":3, "desc":"Rate Room type"}, {"value":4, "desc":"Rate code"}, {"value":5, "desc":"Guarantee code"}, {"value":6, "desc":"Adults"}, {"value":7, "desc":"Children"}, {"value":8, "desc":"Market code"}, {"value":9, "desc":"Source code"}, {"value":10, "desc":"Channel code"}, {"value":11, "desc":"Country"}, {"value":12, "desc":"Nationality"}, {"value":13, "desc":"Created by"}, {"value":14, "desc":"Adult+Child"}, {"value":15, "desc":"Agency"}, {"value":16, "desc":"Company"}, {"value":17, "desc":"Source"}, {"value":18, "desc":"Group"}, {"value":19, "desc":"Micros Discount"}, {"value":-1, "desc":"None"}], "defaultDisplayType":1}, {"paramName":"pIncludeDayUse", "description":"Include Day Use", "valueDataType":"b", "value":[true], "allowCustomValue":false, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[{"value":true}, {"value":false}], "defaultDisplayType":1}, {"paramName":"pDateType", "description":"Date Type", "valueDataType":"n", "value":[1], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pCompHuse", "description":"Comp-Huse", "valueDataType":"n", "value":[0, 1, 2], "allowCustomValue":true, "allowMultiValue":true, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}, {"paramName":"pOrderBy", "description":"Order By", "valueDataType":"n", "value":[2], "allowCustomValue":true, "allowMultiValue":false, "allowRangeValue":false, "allowDiscreteValue":true, "isEditable":true, "usage":25, "isDataFetching":false, "attributes":{"IsDCP":false}, "isOptionalPrompt":false, "allowNullValue":false, "defaultValues":[], "defaultDisplayType":1}], "paramOpts":{"numberFormat":{"groupSeperator":".", "decimalSeperator":","}, "dateFormat":"d.M.yyyy", "timeFormat":"H:mm:ss", "dateTimeFormat":"d.M.yyyy H:mm:ss", "booleanFormat":{"true":"True", "false":"False"}, "maxNumParameterDefaultValues":"200", "canOpenAdvancedDialog":true}, "zoom":100, "zoomFromUI":false, "lastRefresh":"9.7.2014 17:47:04"}, "curViewId":"0"}
viewer_toptoolbar_search_textField:Bul...
text_viewer_toptoolbar_selectPg:2 / 5
text_viewer_toptoolbar_zoom:100%
__CALLBACKID:viewer
__CALLBACKPARAM:{"tb":"next"}

Problem with web.show_document with Jinitiator and Firefox

Not sure Firefox 2.0 is officially certified with Forms 9.0.4.1 and Jinitiatorbut regardless we have some users who want to use this combination. Everything seems to work fine except for the calls to web.show_document which opens a new browser window and displays some html etc.
The problem is that even though the client Forms JVM is Jinitiator (1.3.1.18 or .21) when the call to web.show_document occurs somehow the Sun Java Plugin starts and having the two JVM's at once causes a fatal crash in Firefox. Can anyone suggest a way to preven the second JVM from opening?
When the user uses the Sun Plug as the client Forms JVM there is no problem as the second JVM does not open. Unfortunately some users insist on Jinitiator with Firefox hence the problem. -quinn

James,
This whole applet embedded in a browser model for webforms is driving us batty at times. The list of problems includes:
1) Users are constantly tempted by browser controls and accidentally do all sorts of things to get them in trouble. This has included but not limited to using the navigation arrows, jumping off to read their email in the same window as the form and returning to a dead forms session, minimizing, resizing, blurring off to another window and then returning back by clicking on the title bar of the browser and wondering why the form doesn't tab etc.
Sure hobbling the browser by opening with limited functionality is a possibility but not a complete solution.
2) New versions of browsers seem to break something. Both IE 7 and Firefox 2 have their own problems with web.show_document, especially file associations such as CSV and DBF and trying to open things in Excel in IE7.Firefox seems to have less problems for some yet some some oddities like the one that started this thread (and 2.0 opening new windows in tabs by default instead of windows).
3) JVM jigsaw puzzle. Is it Jinit or Sun, which versions? Which combinations of browser version and JVM works.
4) General fragility of the whole architecture. Running a client JVM in a web browser on top of a PC Operating system connectiong to a forms server over a network embedded in a Java Container server on a full blown web server running on a unix operating system is pushing the bubble. Throw in the mix that any of these components can be combined in numerous ways makes one wonder how it works as well as it does.
Still users randomly getting dropped connections to forms server (network gltches?). General sluggishness (poorly written forms?). Periods of users with unduplicatable errors primarily network related it would appear.
General feel that it is not rock solid stable. Perusing metalink documents on performance and tuning gives too much and too general info to troubleshoot so just shrug shoulders and say 'network problem'.
What's the solution? Java webstart would seem to help at least with the browser realted issues but is that supported and documented how to use yet. Also we'd lose web_show_document which is critical (could it be replaced by webutil calls to open browser?).
-quinn

My Client is having a serious problem with the Contact Form Widget

My Client is having a serious problem with the Contact Form Widget that I can not figure out how to correct.
I created a website for a client and inserted a Contact Form widget on their 'Contact Us' page. Whenever anyone uses the form, the e-mail my client receive shows my e-mail address as the sender. So, when they 'reply' to the e-mail, the reply is sent to me and not the person who sent the original message. This creates a major problem in that I get barraged with e-mail replies while my client's potential customers go without a response.
When I look at 'Site Manager > System E-Mails > Workflow Information > E-mail From Address' on the site's Admin Console, it shows my e-mail information. Is this is what needs to be changed? If it is, what needs to be placed in that field so that the e-mail my client receives shows the senders e-mail information in the 'From' field. My client wants to be able to click reply and have the message sent to the right party. They would be very upset if they have to cut and past the senders e-mail address from the body text on every contact they receive.
Their feeling is that if I can't find a way to make the contact form work the way it should, then it's useless to them.
Can anyone help me figure this out? I really don't want to disappoint my first client.

Are you on a plan that has the CRM feature that stores your customers' data? If so, the idea of the contact form is that you'll receive a notification that there's been an inquiry filled out on your contact form and there should be a link in that email notification that leads to the "Case" that was created when that customer filled out a contact form. You can click that link and visit the case for that customer in your BC site and reply to them from there so that all of the correspondence is logged in the CRM for safe-keeping and for your records.
If your client finds this is too much work to login to BC to reply every time, then you should check to see if you have the "Customer Service Ticketing" feature on your hosting plan. This is a feature where you create a dedicated email account (like [email protected]) and the BC system will automatically login to that email account and pull any emails in that inbox and convert them to a customer case for the sender of the email and then it will send out a notification via email to any of the BC Admin users you delegate as "Customer Service Agents". Since the CST integrates with the BC CRM it lets you reply directly within the email-- but when you reply it will be going to that same email address dedicated to the CST but once the CST service checks your email again and sees that you replied to this inquiry it will log your reply against the customer's case and sends your reply via email back to them so that all the correspondance gets logged on BC's CRM but you can still reply via email.
There's no way to use the default web forms to update the "From" or "Reply-To" address.. it must come from an approved email address to avoid spam issues. On most web services you cannot change the "from" address anyway but usually you can at least specify the "Reply-To" address so that when someone hits "reply" in their email client it will reply to whoever you setup as the "Reply-To" address.
Here's some more information about CST: http://kb.worldsecuresystems.com/kb/customer-service-ticketing.html?bc-partner
I don't think the CST feature is in the webMarketing BC plan-- I think it's only in the webCommerce plan so if you have less than an webCommerce plan you have to tell your client to reply through BC by clicking the link in the notification they get. You can justify it by saying its one or two more steps but it keeps the entire convo on record in their CRM for easy referral later.

The problem with forecast reports in SCOM 2012 after integration with VMM 2012

Hello.
I have problem with forecast reports in SCOM 2012 after integration with VMM 2012. All other reports (not forecasting) works fine. For example, report “Host Group Forecasting” don’t work. The report is generated, but I have error: “Subreport
could not be shown”. I find only errors in SQL Server Reporting logs like this:
library!ReportServer_0-13!1758!06/26/2012-18:26:23:: i INFO: RenderForNewSession('/Microsoft.SystemCenter.VirtualMachineManager.2012.Reports/Microsoft.SystemCenter.VirtualMachineManager.2012.Report.ForecastHostGroup')
processing!ReportServer_0-13!1758!06/26/2012-18:26:28:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Не удалось выполнить
запрос для набора данных "DiskSpaceUsageForecasting". ---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Execution of the managed stored procedure GetTimeSeriesForecast failed with the following error: Exception has been thrown by
the target of an invocation..
Query (5, 58) Parser: The syntax for '6' is incorrect.
   at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Microsoft.AnalysisServices.AdomdClient.IExecuteProvider.ExecuteTabular(CommandBehavior behavior, ICommandContentProvider contentProvider,
AdomdPropertyCollection commandProperties, IDataParameterCollection parameters)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunEmbeddedQuery(Boolean& readerExtensionsSupported, Boolean& readerFieldProperties, List`1 queryParams, Object[] paramValues)
   --- End of inner exception stack trace ---;
The Russian string “Не удалось
выполнить запрос для набора данных "DiskSpaceUsageForecasting"” is translated to “Could not execute query for data set "DiskSpaceUsageForecasting"”.
I have clean installation SCOM 2012 RU1, VMM 2012 RU1. Integration SCOM with VMM work fine.
SQL collation for all SQL DB instances (SCOM and VMM and SCOM reporting) – “SQL_Latin1_General_CP1_CI_AS”
SQL Analysis service: SQL collation – “Latin1_General” ; language for the server – English (United States)
I think the problem in regional settings. By my opinion there are two possible mistakes:
SQL collation for all SQL DB instances. May be need use “Latin1_General_CI_AS”
as provided by
http://blogs.technet.com/b/momteam/archive/2012/05/25/clarification-on-sql-server-collation-requirements-for-system-center-2012.aspx
Need change regional setting. Question is for what (OS regional setting, SQL Analysis service settings,…) ?

Error: Subreport could not be shown
Opening a report for Client Security might result in the following error being displayed in one or more areas of the report: "Error: Subreport could not be shown."
Background
There are two possible reasons for this error:
1. Wrong location   The reporting server is pointing to the wrong computer running SQL Server or a SQL Server instance.
2. Insufficient permissions   The account configured (in SQL Server Reporting Services) to connect to the reporting database does not have appropriate permissions for the database.
Solution
To determine which reason is causing the error, attempt to directly open the subreport reporting the error, by clicking the name of the subreport.
If the reporting server is pointing to a wrong location, the report displays an error similar to the following:
Error message
An error has occurred during report processing.
Cannot create a connection to data source 'SystemCenterReporting'. Cannot open database "SystemCenterReporting" requested by the login. The login failed. Login failed for user username.
To verify the correct SQL Server computer and instance path
In Report Manager, navigate to the report generating the error and click the Properties tab.
Click Data Sources and under a Shared data source, note the path.
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is: http://hostname/Reports/
If you chose to secure the viewing of reports with HTTPS, the URL is: https://hostname/Reports/
Click SCDW.
In the Connection type list, ensure that Microsoft SQL Server is selected.
In the Connection string box, ensure that the correct SQL Server computer and instance name are entered.
Note:
A period (.) denotes the local computer.
If the account has insufficient permissions, the report displays an error similar to the following:
Error message
An error has occurred during report processing. (rsProcessingAborted) Query execution failed for data set 'DSDashboardComputersTrend'. (rsErrorExecutingCommand) EXECUTE permission denied on object 'prSAS_UX_DashboardComputersTrend', database 'SystemCenterReporting',
schema 'dbo'.
To determine if you are experiencing the SQL Server permissions issue
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is:http://hostname/Reportserver/
If you chose to secure the viewing of reports with HTTPS, the URL is:https://hostname/Reportserver/
Click Microsoft Operations Manager Reporting, click Microsoft Forefront Client Security, and scroll to DashboardComputersTrend.
Click DashboardComputersTrend.
If you are experiencing a SQL Server permissions issue, an error similar to the preceding error appears.
To grant permissions to the SQL Server computer
1. In Report Manager, click SCDW and note the account in the Connect using section. This is the account under which the database is contacted.
2. On the server with the System Center Reporting database, start SQL Server Management Studio.
3. In the tree, expand Security, and then expand Logins. Do one of the following:
If the user account is listed, right-click the account, click Properties, and then go to step 5.
If the user account is not listed, right-click Logins and choose New Login.
4. In the Login name box, enter the user account (domain\username).
5. In the Login Properties dialog box, click User Mapping, and then under Users mapped to this login, select the System Center Reporting check box.
6. Under Database role membership for: System Center Reporting, select the db_owner check box, and then click OK.
Thanks,
Yog Li
TechNet Community Support

Problem with navagation of forms

Hi everybody
I have a problem with navigation of forms
I have two forms say a and b.In form a i have a button and i want, when i press that button the form b should open.I wrote when_button_pressed trigger for that button in form a as open_form('b'); Raise form_trigger_failure;
When i run form a and press the button form b is not opening.It is giving me a message as 'form b cannot be opened'
Can somebody tell me where i am wrong.I have compiled b.
TIA
Prajakta

Why are you using Raise form_trigger_failure;
You don't need it.
Try doing open_form('b.fmx');
If this doesnt work
I think your problem is that the fmx file for form b is not in the path to be found.
make sure to include the direcoty in the forms60_path or have it in the same directory as form a.

Problems with a report generated as PDF

I am having a problem with my report when it is generated as a PDF file from the reports server. A space is added soon after the letter w in all the words where there is letter w; for example, the word awake appears as aw ke, will appears as w ill, etc. Does anyone know how to fix this problem? I am using Reports 11g. Thanks.

Hi
In layout change the font (Redo font) thru menu option (Not Font) Format -> Font >Western.
This may solve your problem...
user8655468 wrote:
I am having a problem with my report when it is generated as a PDF file from the reports server. A space is added soon after the letter w in all the words where there is letter w; for example, the word awake appears as aw ke, will appears as w ill, etc. Does anyone know how to fix this problem? I am using Reports 11g. Thanks.

Language problems with std reports

Dears gurus,
We are facing some problems with standard reports due to translations...
We have 4 languages actives at our ERP System, DE, EN, ES and PT... The completation Language is EN in all cases...
The SMLT Import Logs for both languages (ES and PT) and completation with EN are not showing errors, but if we import at last the Language ES, the reports runs OK with logon language ES but with PT as logon language all texts are showed in DE, even that the completatin language is EN. If we re import PT language the reports runs OK with logon language PT but with ES as logon language all texts are showed in DE...
Had anyone faced the same problem and solve it?
Thanx a lot!!!

Garth, we found that the reports with problem was created or provided by SAP trough Report Painter or Report Writer.
We can solve the problem recreating the "Report Group" in the logon languaje that works bad. To do this you have to find in which Report Group is the Report that you are running and using transaction GR52 complete attributes for this group, save (Logged in with the language that shows the problem) and the problem is solved.
I hope this helps you.
Thanx
Regards
MJ

Very big problem with JSF about FORM and "id=" for HTML form's elements and

I have discovered a very big problem with JSF about FORM and "id=" for HTML form's elements and java instruction "request.getParameterNames()".
Suppose you have something like this, to render some datas form a Java Beans :
<h:dataTable value="#{TablesDb2Bean.myDataDb2ListSelection}" var="current" border="2" width="50%" cellpadding="2" cellspacing="2" style="text-align: center">
<h:column>
<f:facet name="header">
<h:outputText value="Name"/>
</f:facet>
<h:outputText id="nameTableDb2" value="#{current.db2_name_table}"/>
</h:column>
</h:dataTable>
Everything works fine...
Suppose you want to get the name/value pairs for id="nameTableDb2" and #{current.db2_name_table} to process them in a servlet. Here is the HTML generated :
<td><span <span class="attribute-name">id=<span class="attribute-value">"j_id_jsp_1715189495_22:0:nameTableDb2">my-table-db2-xxxxx</span></td>
You think you can use the java instructions :
Enumeration NamesParam = request.getParameterNames();
while (NomsParam.hasMoreElements()) {
String NameParam = (String) NamesParam.nextElement();
out.println("<h4>"++NameParam+ "+</h4>);
YOU ARE WRONG : request.getParameterNames() wants the syntax *name="nameTableDb2" but JSF must use id="nameTableDb2" for "<h:outputText"... So, you can't process datas in a FORM generated with JSF in a Servlet ! Perhaps I have made an error, but really, I wonder which ?
Edited by: ungars on Jul 18, 2010 12:43 AM
Edited by: ungars on Jul 18, 2010 12:45 AM

While I certainly appreciate ejb's helpful responses, this thread shows up a difference in perspective between how I read the forum and how others do. Author ejb is correct in advising you to stay inside JSF for form processing if form processing is what you want to do.
However, I detect another aspect to this post which reminds me of something Marc Andreesen once said when he was trying to get Netscape off the ground: "there's no such thing as bad HTML."
In this case, I interpret ungar's request as a new feature request. Can I phrase it like this?
"Wouldn't it be nice if I could render my nice form with JSF but, in certain cases, when I REALLY know what I'm doing" just post out to a separate servlet? I know that in this case I'll be missing out on all the nice validation, conversion, l10n, i18n, ajax, portlet and other features provided by JSF".
If this is the case, because it really misses the point of JSF, we don't allow it, but we do have an issue filed for it
https://javaserverfaces-spec-public.dev.java.net/issues/show_bug.cgi?id=127
If you can't wait for it to be fixed, you could decorate the FormRenderer to fix what you want.
I have an example in my JSF book that shows how to do this decoration. http://bit.ly/edburnsjsf2
Ed

Probleme with crystal report : a report with 3 levels

hello...
please am a from france, i have a bad english so is there somme one how speak frensh, i have a probleme with crystal report...
so my first report, i have an XML file xith contine a lotof data, ils with a lot of level so i want that you show me how can i reprensent that, i can give u my wml file and also a word file to explain you what do i want comme result..
so i have donwload an evaluation version of crystal report...
thaks for u

Hi alpacino,
I know a really good actor that has the same name...and you're new to reports...hmmmmmmmm.....well, first of all,
bravo to you for being able to write english at all. I'm glad I don't have to learn it again.
Go to the Group Expert and select one of your "levels".
This will be your top group. Then select the next "level", etc.
I know you're not a dummy, but get a "Crystal Reports for Dummies" book and then a Crystal Reference book. The dummy books are actually pretty good and give you a "from the ground" start. Then keep coming back to the forum and test out your ideas by helping others.
Hope this helps,
The Panda

Problem with web.xml

Hello,
I have a big problem with web.xml.
i can run the servlet demos with the default web.xml, but when i try to user a costum web.xml files, i receive a 404 page not found on a link.
i have some dificulty to post here. but can somebody help my with my web.xml files?
thanks for your help.
have a nice day!

Be careful with the place of your files and folders. It's possible that you've just mentioned the cause of your problem.
My web.xml is
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>gco</display-name>
<description>gco webapplicaties</description>
<servlet>
<servlet-name>MopoController</servlet-name>
<servlet-class>org.gertcuppens.controller.MopoController</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>MopoController</servlet-name>
<url-pattern>/MOPO</url-pattern>
</servlet-mapping>
</web-app>
When I want to call my web application locally, I use the URL http://localhost:8080/gco/MOPO.
The http://localhost:8080 calls Tomcat. With /gco, Tomcat knows it should look for a folder gco inside the webapps folder. This one should contain a WEB-INF/web.xml folder for further instructions.
With /MOPO Tomcat knows, having read the web.xml files of all webapps folders at start, it should look for a servlet with the name MopoController. And this MopoController points to the class org.gertcuppens.controller.MopoController. So, Tomcat knows where to find everything.
Try to see whether your Tomcat can find everything inside the folders using your web.xml file.

Problems with Submitting the form

Hey Guys,
I have a form with 7 different fields. my form is connected with the database. once the user fills out the information and clicks on submit the entry should be saved in the database.
Everything is working fine. i can establish connection with the database. my only problem is that when i click on submit its not adding the entry in the database. I think i have problems with this command
<form method = "post" > . Any helpo will be really appreciated. I am posting some part of the code.
<%!
public void jspInit() {
    try {
      Class.forName("org.apache.derby.jdbc.ClientDriver");
      System.out.println("JDBC driver loaded");
    catch (ClassNotFoundException e) {
      System.out.println(e.toString());
<body>
<%
String name, unit, title, supervisor, region, dept, date;
%>
<p align="center"><b><font size="5" face="Arial">LOGIN REQUEST FORM </font></b>
<form method="POST">
<p align="left"><b><font size="2">
     </b>Name:<b> <input type="text" name="name" size="20">   </b>Title   <b>
     <input type="text" name="title" size="20">         </b> Dept <b>
     <input type="text" name="dept" size="20"></b></font></p>
     <p align="left"><font size="2"><b>
     </b>Supervisor: <b> <input type="text" name="supervisor" size="20"> </b>Region<b>
     <input type="text" name="region" size="20"> </b>Business Unit<b>
     <input type="text" name="unit" size="20"></b></font></p>
     <p align="left"><font size="2"><b>              </b>
     Effective Date:<b> <input type="text" name="date" size="20"></b></font></p>
     <input type = "reset">
     <input type = "submit">
     <%
     name = request.getParameter("name");
     unit = request.getParameter("unit");
     title = request.getParameter("title");
     supervisor = request.getParameter("supervisor");
     region = request.getParameter("region");
     dept = request.getParameter("dept");
     date = request.getParameter("date");
     boolean error = false;
     String message = null;
     try {
          Connection con = DriverManager.getConnection("jdbc:derby://localhost:1527/sample");
          System.out.println("Connection Established");
          Statement s = con.createStatement();
          String sql = "SELECT name FROM users" +
          "WHERE name='" + name + "'";
          ResultSet rs = s.executeQuery(sql);
          if(rs.next()) {
               rs.close();
               message = "The username <B>" + encodeHtmlTag(name) + "</B> has already been taken. Please select another name.";
               error = true;
          else {
               rs.close();
               sql = "INSERT INTO user" +
               "(name, unit, title, supervisor, region, dept, date)" +
               "VALUES" +
               "('" + name + "'," + " '" + unit + "'," + " '" + title + "'," + " '" + supervisor + "',"
               + " '" + region + "'," + " '" + dept + "'," + " '" + date + "')";
               int i = s.executeUpdate(sql);
               if(i==1) {
                    message = "User Added";
          s.close();
          con.close();
     catch(SQLException e) {
          message = "Error " + e.toString();
     catch(Exception e) {
          message = "Error" + e.toString();
          error = true;
     %>
</form>
</body>
</html>

Even if there was an exception being thrown, you wouldn't see it because you're catching it but not doing anything with the message:
catch(SQLException e) {
          message = "Error " + e.toString();
     catch(Exception e) {
          message = "Error" + e.toString();
          error = true;
     }Try changing this part to:
catch(SQLException e) {
          message = "Error " + e.toString();
                e.printStackTrace();
     catch(Exception e) {
          message = "Error" + e.toString();
          error = true;
                e.printStackTrace();
     }

I have problems with buttons and Forms in my trial proof of Indesign CC, how can I fix it?

I have problems with buttons and Forms in my trial proof of Indesign CC, how can I fix it?

Moved to InDesign forum.
You can start by telling us what the problem is.

Problems with activity reports on Enterprise Portal

Hello, we have problems with activity reports on Enterprise Portal. It shows only zeros since certain date.
We have this error in monitoring of Activity Reports - Status of Activity Reporting: "The database contains non-aggregated data that is more than 2 hours old".
And we found this exception in logs: "Exception during a Prepared-statement DB update"
What could be a problem? What should we do?
Thank you.

Configurarion of the Data Collection Service is done well, I think:
Activate portal activity report: true
First day of the week (e.g., Sunday or Monday): Monday
Gather iView statistics:true
Gather page statistics:true
Gather statistics for remote users of local content (global portal): true
Number of days for daily data retention: 90
Number of days for hourly data retention: 30
Number of days for monthly data retention: 730
Number of days for quarterly data retention: 1460
Number of days for weekly data retention: 365
Objects to exclude from reports
Pages for which to gather user data
Save interval (minutes): 60
What should we do then?

PROBLEMS WITH WEBI REPORTING FORM BW DATASOURCE

Similar Messages

Maybe you are looking for