Procedure failure after conversion of MS SQL 7

I would like you to know anyone has had problems after conversion from MS SQL7 to Oracle 8.0.5 or Oracle 8i.
I have tries using very simple procedure which have failed. Any information will be very helpful.
Pl. get back to me at [email protected]
Thanks,
Jeevan
null

Hi Jeevan,
Please mail [email protected] with details of your issues. We will work to resolve them as quickly as possible.
The Workbench should work for you. Please remember you have a beta version of the SQL Server 7.0 software and we have fixed a lot of issues in the production version.
The production version 1.2.5.0.0 will be available from this site shortly and also from the 8.1.6 release 2 for Windows NT CD.
Regards
John

Similar Messages

SQL connection errors when stress testing mobile service: SQL failure after 3 attempts

I have created a Mobile Service (node.js), which has been running for a few months with 50-100k api calls per day with no issues.
The usage of the service will be scaled up soon, and it will receive much higher traffic, so I am running stress tests (on a staging deployment of the same service).
The api in question queries data from the sql database that is attached to the mobile service, but caches the resulting data in a redis database for 5 minutes, so each call with identical parameters will not access the SQL database, just the redis cache.
My first test never has any problems:
Run a single api calls as fast as possible using the program wrk (https://github.com/wg/wrk). This test never has a problem, and I have run it an hour continuously with a sustained rate of 200 req/s and very few timeout errors.
The second test always causes problems:
I created a list of 5 different api calls to the same service (same endpoint, but different parameters), and I run those randomly interweaved as fast as possible. I use the program locust (http://locust.io) for this, spawing 10.000 clients at a rate of 500
per second. For the first few seconds everything goes ok, but then connections start failing massively.
I get mostly:
Error: SQL failure after 3 attempts. Error: [Microsoft][SQL Server Native Client 10.0]TCP Provider: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected
host has failed to respond.
(SqlState: 08001, Code: 10060)
And I see this in the http response:
ConnectionError(ProtocolError('Connection aborted.', gaierror(8, 'nodename nor servname provided, or not known')),)
The strange thing is that since I am running the same five calls repeatedly, only the very first of each call will actually access the sql database, every subsequent call will just return data directly from redis, and not try to access the sql database at
all.
In the azure console for the sql database in question, I see 1860 successful connections and 11 failed connections, which does not explain the massive failure rate I am seeing.

Thanks for sharing your tips on this forum, as it will be useful for other users, that run into this issue.
Feedback like this will also help us improve error reporting in the next release, as missing class files in the packaged application is a common issue when developers are moving from the embeded oc4j instance packaged with JDewveloper to standalone instances.
-Eric

Page numbers incorrect after conversion from Excel to pdf

Page numbers incorrect after conversion from Excel to pdf
""This above link (thread:834599) is from a case back in 2011 that claims to solve this problem, but it does not solve this problem. I think that customer only cared about having continuous page numbering, not discrete page numbering per sheet.
========================
I still have this issue in Acrobat XI and MS Office Professional Plus 2010. I keep upgrading to no avail. This regression has resulted in a huge time drain for me. If you fixed it, please explain how I can get my hands on the resolution.
Previous versions of Excel and Adobe Acrobat enabled flexibility around the "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) token, depending on context and usage. The "# of pages" token could represent EITHER the number of pages in the workbook OR the number of pages in the tab/sheet, depending on how you generated the PDF:
You could select "Selected Sheets" and then select all or some of the individual sheets in the workbook, and the PDF would honor the discrete numbering of each of the sheets, so the first page of each sheet was p1 and the "# of pages" was the number of pages in the sheet; not the number of pages in the workbook; or
You could select "Entire Workbook" and the PDF would honor continuous page numbers across all sheets, as a single document.
Now, it only honors the total number of pages in the workbook, regardless of the method you use to publish to PDF: saving as PDF, printing to PDF, using "createPDF" from Acrobat plugin to Excel's menu ribbon; selecting all sheets, some sheets, or Entire Workbook; automatic First page number or "1" under Page Setup > Page> First page number. (This last option, btw, does restart every sheet at p1, but it hardly makes sense if the total number of pages is still the total number in the workbook instead of the number in the sheet.)
I spent a lot of time trying each which way that the blog posts recommended and have tried this on multiple versions of Excel and Acrobat now.
NONE of these time-consuming experiments gave me what I wanted.They all insist that "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) is the total number of pages in the workbook or the total number of pages in the selected sheets combined.
The numbering are correct in Excel Page Layout.
The same issue happens when using LibreOffice calc. (Although, I never tested with Libre Office before, so I don't know that it ever worked).
The workaround now is to create PDF for each spreadsheet one at a time, and then compile them using the Acrobat combine/binder feature. All alternatives are extremely time consuming and tedious. It used to be automatic. This is a major regression that has gone untreated for over a year now, maybe two years.
My task takes infinitely more time to complete than it did with previous versions of Acrobat. That means that days are added to my project, when the functionality used to enable a quick pdf generation that was ready for review, now I have to do this very manual time-consuming set of steps to generate a draft. As the project has grown and more tabs are added, my pdf-generation task takes that much longer. We require lots of drafts. It used to be easy and fast. Now it is hard and time-consuming.
In my opinion, the problem is not Excel; it is Acrobat because it was introduced with an upgrade in Acrobat, not an upgrade in Excel. The problem was introduced in Acrobat 9 or 10. Please provide a patch or add-on or something.

If you are setting up the page numbers in Excel, the resulting PDF would display the the page numbers created in Excel. On Excel 2010 support page, (http://office.microsoft.com/en-us/excel-help/insert-and-remove-page-numbers-on-worksheets- HA010342619.aspx#BM2) is stated the following "tip" which indicates by default Excel 2010 starts numbering each tab with 1. Exel's workaround tip is below -
Set a different number for the starting page
Tip To number all of the worksheet pages in a workbook sequentially, first add page numbers to all worksheets in a workbook, and then use the following procedure to begin the page number for each worksheet with the appropriate number. For example, if your workbook contains two worksheets that with both be printed as two pages, you would use this procedure to begin the page numbering for the second worksheet with the number 3.
On the Page Layout tab, in the Page Setup group, click the Dialog Box Launcher next to Page Setup.
On the Page tab, in the First page number box, type the number that you want to use for the first page.
Tip To use the default numbering system, type Auto in the First page number box.
Also helpful in the same section is the note on viewing page numbers. To see if the page numbering dilemma originates in Excel make sure you are using the Page Layout View see below:
Hide All
If you want numbers shown on pages when you print a worksheet you can insert page numbers in the headers or footers of the worksheet pages. Page numbers that you insert are not displayed on the worksheet in Normal view — they are shown only in Page Layout view and on the printed pages.
Overall it may be easier not to create the page numbers in Excel but instead create then in Acrobat using the Headers and Footers option in Acrobat. I hope this helps - it sounds like a frustrating issue you are experiencing.

XML conversion in pl/sql

hi ,
How do i map the xml handling code in t-sql to pl/sql??
for example , here is the t-sql code :
CREATE PROCEDURE [dbo].[usp_LIBRARYHideUnhideTreeNodes]
     -- Add the parameters for the stored procedure here
     @paramMyXml text,
     @XmlHandle int output
AS
BEGIN
     -- SET NOCOUNT ON added to prevent extra result sets from
     -- interfering with SELECT statements.
     SET NOCOUNT ON;
/*Update statements*/
     EXEC sp_xml_preparedocument @XmlHandle output,@paramMyXml
     UPDATE LIBRARYTree SET IsVisible = ~IsVisible WHERE NodeId in(
     SELECT xNodeID FROM OPENXML (@XmlHandle, 'HiddenNodes/Node',1)
     WITH ( xNodeID int '@id'))
     EXEC sp_xml_removedocument @XmlHandle
END
The corresponding code in pl/sql by sql developer is :
CREATE OR REPLACE PROCEDURE usp_LIBRARYHideUnhideTreeNodes
-- Add the parameters for the stored procedure here
v_paramMyXml IN CLOB DEFAULT NULL ,
v_XmlHandle OUT NUMBER
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
NULL/*TODO:SET NOCOUNT ON*/;
/*Update statements*/
sp_xml_preparedocument(v_XmlHandle,
v_paramMyXml);
UPDATE LIBRARYTree
SET IsVisible = UTL_RAW.BIT_COMPLEMENT(IsVisible)
WHERE NodeId IN ( SELECT xNodeID
FROM DUAL/*TODO:OPENXML (@XmlHandle, 'HiddenNodes/Node',1)
WITH ( xNodeID int '@id'))*/ );
sp_xml_removedocument(v_XmlHandle);
END;
This on compilation for obvious reasons gives errors.
how is sp_xml_preparedocument,openxml,sp_xml_removedocument handled in pl/sql??
any help in this direction will be appreciated..
Cheers,
Shishir.

Can you brief what you want to do? You don't need to do statement by statement conversion from t-sql to PL/SQL. This is not translation.

Avoid procedure or function calls between a SQL operation and an implicit cursor test

when i analyse this code with code expert

atpidgeon wrote:
when i analyse this code with code expert
                        UPDATE P_PM_CONTROL_COUNT
                        SET AVAIL_SEG = AVAIL_SEG -1,
                            ALLOCATION = ALLOCATION -1
                        WHERE PM_UNIT_TYPE_ID = vrectab(1)
                        AND USAGE_DATE = vrectab(2)
                        AND SEGMENT_CODE = vrectab(5)
                        AND ALLOCATION - UNITS_RESERVED > 0;
                        IF sql%rowcount = 0 then --Added block and exception to prevent invetory going negative when placing multi units in same unit type out of service.
                            vErrMsg := 'Could not process your out of service request because your selection for unit '|| vrectab(3) || ' at ' || pvPropertyId || ' for ' || vrectab(2) || ' would cause segment ' || vrectab(5) || ' to be over allocated.';
                            RAISE SegOverAllocated;
                        END IF;
i get "Avoid procedure or function calls between a SQL operation and an implicit cursor test.",as far has i know
iff you're doing a sql%rowcount    after an update.. trying to see how many rows were updated... you dont want procedure or function calls between the update and the sql% line
correct me if im wrong and how would i fix it?or maybe i shouldnt
You correct it by NOT executing function calls as part of the UPDATE statement.
1. Issue the function calls BEFORE the update statement
2. save the function results into variables
3. use those variables in the UPDATE statement.
v_rectab1 := vrectab(1);
v_rectab2 := vrectab(21);
v_rectab5 := vrectab(5);
UPDATE P_PM_CONTROL_COUNT
                        SET AVAIL_SEG = AVAIL_SEG -1,
                            ALLOCATION = ALLOCATION -1
                        WHERE PM_UNIT_TYPE_ID = v_rectab1
                        AND USAGE_DATE = v_rectab2
                        AND SEGMENT_CODE = v_rectab5
                        AND ALLOCATION - UNITS_RESERVED > 0;

Reading files CCSID 500 after Conversion to ASCII

Hello
We have done a Conversion EBCDIC --> ASCII on a SAP R/3 4.6D , kernel 4.6D_EXT, on iseries, using method INPLACE
As far I Know, logfiles of Batch Inputs and Jobs are located on IFS.
After conversion to ASCII , SAP R/3 cannot read those files (using SM35 or SM37) because CCSID of those files remains 500.
They shoud have CCSID = 819.
So procedure Conversion only manage the Database... I think is necessary to do something related to those files of IFS.
Any suggestion?
Thanks and regards
Javier

Hallo Javier,
   The code page conversion does not directly convert any data in IFS. If the files contain text data and are opened as text files, then the ASCII system should still be able to read them. It will respond to the CCSID 500 with the expectation that the file content is EBCDIC and display it accordingly. Are you actually experiencing a problem with the display in SM35/SM37? If so, you should ask SAP to investigate.
Regards,
   Sally Power
   Dev. Support for SAP on IBM i

External Hard Drive Failures after iMac internal drive replaced

I was one of those lucky ppl who had to have my internal 1TB Seagate HDD replaced due to the recall. It was replaced on Friday.
After the drive was replaced (with another Seagate, ***?), I cloned my previous system back to the new drive (restoring from Time Machine required me to re-download Lion, which required me to re-download to a newer version of Snow Leopard, and just, Oi, vey, I used my clone).
I then had to create another bootcamp partition, and after that, I restored my previous bootcamp from an image backup with Winclone.
The next morning, my Time Machine external backup drive (a Maxtor OneTouch) makes horrible fluttering and crunching noises and cannot be found via disk utility, certainly doesn't mount to the desktop. I figure it just coincidentally failed and attached a new drive (a different OneTouch) for backup.
While Time Machine is performing an initial backup to this new drive (will take 10 hrs), I try to move a few media files to another external media drive (LaCie 1TB). I receive a couple of error -36s on a few particular files, so I figure I should wait for the Time Machine to backup and then diagnose the media drive.
The next morning (after 10 hr backup is finished), I have a stop-sign error that a disk was unmounted improperly (the LaCie media drive). The drive cannot be seen in disk utility or on a completely different MBP running Snow Leopard. It's spinning up, but it can't be read.
Only thing I can think to do is reinstall 10.8.2 over top the cloned system, make sure that the recovery partition was recreated and working.
This can't be a coinicidence, right? At this point, I'm afraid to keep my external storage drives and clone attached to the iMac, but I'm afraid to not have TM drive attached. Anyone know where to start diagnosing the problem?
1. Could a new internal drive be the problem, hardware wise?
2. Could the lack of an initial recovery partition or the setting up of a bootcamp partition have these sorts of consequences?
3. Could the problem be from restoring a clone?

Well, it is a LaCie-packaged adapter, some version of that model. The hub is on the mac mini inspired line of LaCie HDs (http://www.lacie.com/company/news/news.htm?id=10269). I've had it for 6 yrs, and the hub is still going. Other drives have been running from the hub without issue for all that time (and still are). There is no hissing, and the display light indicates the hub is getting power.
You think it's time for a new hub?
The internal switchout is just a coincidence?
(Basically, I'm not a hardware expert. Does anyone know if an internal drive or internal sensor/connection problem can cause externals to fail or blowout a controller? I'm waiting on a drive dock to arrive—I'll know more whether these are HD failures or chip failures after that. Both drives showed normal-seeming power use via their display lights.)

Retain the metadata associated with a doc after conversion to pdf

I am using word automation service to convert word document to a pdf in a sharepoint 2010 document library. however after the conversion of the document from word to pdf the associated metadata is lost. (i.e the converted document which is added to the library doesn't retain
the old metadata like duedate,doc id etc...)
Can someone help me how to retain the metadata associated with list after conversion of document to PDF.
I am using one ItemAdded event reciever in which when I am trying to looping out the library in which all word documents are there, I am not getting the last updated document that got converted into pdf.
Code which I am using is below: Here destContenttype is content type of the the document and destFilename is file name of the document.
SPListItemCollection newLstItms = lstNonPublishLst.GetItems(newSqlQuery);
                foreach (SPItem newItem in newLstItms)
                    if (newItem["Content Type"].ToString() == destContenttype && newItem["Name"].ToString().Split('.')[0] == destFileName[0])
                        properties.ListItem["Document Number"] = newItem["Document Number"];
                        properties.ListItem.SystemUpdate();
                        break;
Please advise, it is really urgent.
Thanks in Advance

I have worked on copying SharePoint meta data (and painfully fine tuning it to deal with all exceptions, 3rd party apps and content types) for the last 8 years. Not full time though :-)
It is part of a commercial product that does PDF Conversion in SharePoint and takes great care of dealing with meta data. Have a look at
this blog post.
Apologies for the shameless plug, but as you are in a hurry it may be the best, and most reliable, solution.
Disclaimer, as I mentioned I worked on this product so consider me biased.

Calling of Stored Procedure in After Insert Trigger

Can I call a Stored Procedure in After Insert Trigger ?
Please send a sample code (good example) of After Insert Trigger.
Thanks.

Kishore,
I have two table WLCS_ORDER, WLCS_ORDER_LINE
WLCS_ORDER - It holds order header information like
ORDER_ID
CUSTOMER_ID
TRANSACTION_ID
STATUS
ORDER_DATE
SHIPPING_METHOD
SHIPPING_AMOUNT
SHIPPING_CURRENCY
PRICE_AMOUNT
PRICE_CURRENCY
SHIPPING_GEOCODE
SHIPPING_STREET1
SHIPPING_STREET2
SHIPPING_CITY
SHIPPING_STATE
SHIPPING_COUNTRY
SHIPPING_POBOX
SHIPPING_COUNTY
SHIPPING_POSTAL_CODE
SHIPPING_POSTAL_CODE_TYPE
SPECIAL_INSTRUCTIONS
SPLITTING_PREFERENCE
ORDER_SUBTOTAL
WLCS_ORDER_LINE - It holds all order lines information like
ORDER_LINE_ID
QUANTITY
PRODUCT_ID
TAX_AMOUNT
TAX_CURRENCY
SHIPPING_AMOUNT
SHIPPING_CURRENCY
UNIT_PRICE_AMOUNT
UNIT_PRICE_CURRENCY
MSRP_AMOUNT
MSRP_CURRENCY
DESCRIPTION
ORDER_ID
TOTAL_LINE_AMOUNT
Relation between WLCS_ORDER, WLCS_ORDER_LINE is one to many.
For each WLCS_ORDER row, one or more order lines will insert into WLCS_ORDER_LINE table.
For each new row in WLCS_ORDER table, I have to update the following columns in both the tables with my maths.
WLCS_ORDER
shipping_amount
price_amount
order_subtotal
WLCS_ORDER_LINE
shipping_amount
I thought I can do this in after insert trigger, But if it is not possible, Please give the best way to fulfill this requirement.
I appreciate your help.
Have a great day.
Srinivas

After closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???

after closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???

You can always shut it down manually via the Task Manager
(CtrlShiftEsc)...
On Mon, Sep 1, 2014 at 3:05 PM, frank koethen <[email protected]>

Internal camera failure after software updates...first skype couldn't......

Hello!
I am having internal camera failure after software updates...first skype couldn't find the camera, and now photo booth also says camera is not connected. Its a brand new MacBook Pro which has been working fine for a month, but after a software update (the blinking message said i had 13 new things to update...you know what I'm talking about right?) all of a sudden Skype couldnt find a camera, so i went to the skype community and tried some things (like trashing skype) but now photo booth says no camera detected, which is weird cause the camera is built into the computer..
Please help!
Thanks
O

First, reset the SMC:
http://support.apple.com/kb/HT3964
If that doesn't help, then take it to an Apple Store for examination.

Videos too heavy after conversion (Zen V Pl

Hi everybody. I bought a MP3 Player Zen V plus. My problem is that I have to convert the videos before to put them on the MP3 Player. But after conversion, the videos become too heavy, so that I can't by example put a divx movie on the player (If a divx movie is 600 mo before conversion, he is 2 go after conversion.)Can anyone help me ?Thanks. PS : Sorry if my english is bad, I am french and that's difficult for me.

Sorry, I should have included an English version as well.....it basically says try PocketDivx (my preference) or SuperC. I forgot the Zen V Plus uses a uncompressed AVI....the direct copy?option within PocketDivx may work....may not. ---------------- - As HHS points out, the Zen V Plus uses a uncompressed AVI format. If you try PocketDivx, in the advance options, there is a option to direct copy the video and audio stream...this may work. Comme HHS fait remarquer, le V zen Plus utilise un format de AVI sans compression. Si vous essayez PocketDivx, dans les options d'avance, il y a une option pour diriger la copie le vid?o et le ruisseau audio. ..this peut travailler.Message Edited by Locknar on 04-20-200707:4 PM

[SOLVED]X start failure after upgrade: dri3,present modules missing

I start X with ~.xinitrc from console, which won"t work after last upgrade --first in two weeks.
(EE) Server terminated with error (1).Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
Xorg.log.0 :
[51:778] (EE) intel: Failed to load module "dri3" (module does not exist, 0)
[51:779] (EE) intel: Failed to load module "present" (module does not exist, 0)
Installed packages (EDIT: completed):
xf86-video-intel-2.99.{914-4,916-1}-i686 and also tried with xf86-video-intel-git, with "SNA" acceleration.
intel-dri 10-2.7-3
dri2proto 2.8-2
dri3proto 1.0-1
xf86driproto 2.1.1-3
Linux 3.15.5-2-ARCH i686
Linux CK Atom 3.16.2-1
Issue occurred after upgrading from v2.99.912-1 to v2.99.914+. I was going to try downgrade xf86-video-intel to v2.99.912-1 (as in the first thread in Refs) but went in a dependency conflict, with the older intel driver requiring glamor-egl which conflicts with xorg-server ':-|
Atom netbook
lspci:
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
Some refs :
» [SOLVED] X start failure after upgrade https://bbs.archlinux.org/viewtopic.php?pid=1426837
» [Solved] xf86-video-Intel-2.99.912-1 breaks xorg https://bbs.archlinux.org/viewtopic.php?id=182932
Last edited by kozaki (2014-09-12 09:45:53)

The issue occurred after upgrading from xf86-video-intel-v2.99.912-1 to v2.99.914+ and xorg-server-1.15.2-1 to 1.16.0-6 (and -devel).
same issue if:
- Switching accelaration method to "UXA" as per https://bugs.archlinux.org/task/40860
- Adding Option "DRI" "False"
Digged a bit:
- same modules errors but appears to be a Gnome bug (X starts): https://bbs.archlinux.org/viewtopic.php?pid=1441716
- same modules errors but X starts up without problems http://www.linuxquestions.org/questions … 175511372/
makes me doubt if this issue is related to the modules not found. Which is the single indication I found so far x-/
Any light on where can the issue comes from? hardware is pretty much standard even if getting a bit old. Never had Xorg related issue so far on this pancake.
Last edited by kozaki (2014-09-11 11:05:42)

Incorrect displayed pictures after conversion docx- pdf

Hello,
I use Acrobat X Pro and I want to create a PDF using the "Create PDF" function in Acrobat itsself.
In the word document there are excel charts. But they are insert from excel to word as graphic! The charts have some table elements filled with stripe patterns.
But after conversion it looks like that:
Any idea?
Thank you very much in advance!

I ran these in AA 9.5 with a print from WORD. The settings file was set to my default of the IEEE publications settings (for Journals). You could also try press or print settings. The standard and smallest size settings do not do very well for a lot of graphics. Any way here are the two pages captured on screen at 200%. I can try AA XI if you like.
and
I redid the experiment with AA XI. Unfortunately on this machine I do not have OFFICE, but have LibreOffice. I am including the results or printing to the Adobe PDF printer from LibreOffice. I have cut and pasted the view of both pages (as in your PDF).
and
Actually, the LibreOffice version looks better to me than the MS version. For some reason the second table seems messed up, but that is how it looks in LibreOfffice also. I do not use LibreOffice much and so I may have not done some things correctly. However, that gives you another view.

Ace probe failure after IIS app pool recycle?

Windows Server 2003 SP2
ACE Module A2(1.6a)
I suspect this is caused by an IIS6 setting, but posting here in case anyone has seen this. For this one particular site, we have 4 servers in the farm. 2 of those servers are fine. The other 2 (new) servers will generate probe failure after the site's app pool recycles. I then remove the 2 servers from service and re-activate (no inservice, then inservice) and the probe comes back as operational. It appears that the app pool recycle somehow is resetting the hash on the default page, though I'm not sure how. Any ideas are very much appreciated.

Yeah, the hash is inside the probe. Here's the config for the serverfarm and the probe. Public-007 and Public-008 are new servers...the other 6 have been in the farm for the last 2.5 years and they don't have this issue. It's only the 2 new boxes that the probe fails when the app pool is recycled.
serverfarm host PUBLIC
probe URL-DEFAULT-ASPX
rserver PUBLIC-001
    inservice
rserver PUBLIC-002
    inservice
rserver PUBLIC-003
    inservice
rserver PUBLIC-004
    inservice
rserver PUBLIC-005
    inservice
rserver PUBLIC-006
    inservice
rserver PUBLIC-007
    inservice
rserver PUBLIC-008
    inservice
probe http URL-DEFAULT-ASPX
interval 2
faildetect 2
passdetect interval 2
passdetect count 2
request method get url /default.aspx
expect status 200 200
hash

Procedure failure after conversion of MS SQL 7

Similar Messages

Maybe you are looking for