Procedure for Porting Existing Family Plan Line into a Different Family Plan?
Currently my partner has his line on a friend's family plan. I'm looking to set up a new (I'm not an existing customer) 2-line family plan of my own and then port his number into my plan (which will, of course, cancel that extra line on his friend's plan).
Can I go ahead and order my family plan with two lines and handsets on the VZW site and then at a later time work with his friend to get his number ported onto the second line in the family plan? Or is there a better method to go about getting that line on that other plan moved onto my line on my plan?
Kindly,
Gordon
Does he want to keep his number?
If so, you will need to do an Assumption of Liability to take over financial responsibility for the line. Basically, you call in or visit a store with the current account owner, and a Verizon rep will take you through the process. There is no fee for the AoL, and Verizon will do a credit check. You may have to pay a deposit depending on the results. The current contract will also come over with the line, so unless it is currently eligible for an upgrade, you will not be able to buy a phone at a discounted price until it reaches month 20 of its contract.
You can either do the AoL, establishing your account, and then add your new line and switch to a Family Share Plan, or set up your account and then do the AoL. There's no real difference.
Similar Messages
-
We are using a Sony HDV-Z7U camera for acquisition. We recently recorded an event using the camera's non HD capabilities. We set the camera to record "DV SP" 16x9 settings on both Mini-DV tape and CF card.
To import the DV SP footage into FCP7 we chose the "DV NTSC anamorphic" setting in the log and transfer settings window. After a successful transfer from the CF card (the CF card held approximately 83 minutes) we checked the size of the file and found it to be 16 Gigs! Why so big? An 83 miniDV tape shot in SD should easily fit on a standard 4.7 gig MPEG2 DVD.
We need to burn DVDs of this show - we sent it to compressor and got horrible quality.
What is the best setting to use in FCP7's log and transfer settings window to import DV SP 16x9 standard def. footage and what is the best method for exporting for outputting this footage to DVD that preserves the original quality of the DV SP footage?? Anyone? Many thanks> Why so big? An 83 miniDV tape shot in SD should easily fit on a standard 4.7 gig MPEG2 DVD.
No it doesn't. DV is 13GB per hour.
In any case, a Video DVD uses the MPEG 2 codec, not DV.
>What is the best setting to use in FCP7's log and transfer settings window to import DV SP 16x9 standard def.
DV NTSC anamorphic.
>what is the best method for exporting for outputting this footage to DVD...
Use the Compressor DVD preset "Best Quality 90 mins".
>...that preserves the original quality of the DV SP footage?
Not going to happen, you are compressing by a factor of 1:4. Shooting as HDV would have given you better quality material to start with. DV is at the bottom end of the scale. -
The three main hurdles to porting existing Flash projects to iOS with AIR
The purpose of this discussion is to identify significant problems currently preventing AIR for iOS from being a viable solution for porting existing Flash apps. These issues have been largely ignored by Adobe, so I hope that everyone will add to this discussion if you have also run into these roadblocks in targeting iOS with the AIR SDK. I hope that Adobe staff will address and provide some much needed information with regard to fixing these problems.
There are 3 main problems with targeting iOS currently, which are probably affecting anyone who is trying to port a project that is both medium to large in size and makes use of SWF loading. Pretty much any project that has a MVC architecture is going to load SWF assets that are compiled against a view class, so this is likely affecting many people.
1. Bug - ADT packager runs out of memory when packaging "large" numbers of SWF assets
https://bugbase.adobe.com/index.cfm?event=bug&id=3511656
This is a blocking bug that prevents packaging projects with a large number of SWF assets. It is preventing me from being able to package all the needed assets for my project. I provided Adobe with my project to package a couple months ago so this bug can be reproduced in house and fixed. The Adobe employee who was handling this never tried to reproduce the issue and has stopped responding to email and comments in the bug. Adobe, please have someone take charge of testing and fixing this bug. It seems like it would be a straightforward fix once the failure is reproduced within a debugger.
Has anyone who has encountered this problem determined the number of files or classes where it starts to fail. I've spent some time trying to reverse engineer what the packager is doing when it runs out of memory, so think I can determine how many classes it's working with, but obviously the size of the classes will be variable and so this number will probably be more of a range where we start to get into the failure state.
Please let me know if you can reproduce this issue with your project with many SWF assets and upvote the bug if you are already aware of this one.
2. Bug - SWF reloading when doing a "real" (AOT) compile
https://bugbase.adobe.com/index.cfm?event=bug&id=3636385
There is already a forum post that covers the history of this issue (http://forums.adobe.com/message/4920638) but that also covers some issues in older AIR builds with loading of any SWF asset (previously fixed), where this bug deals specifically with reloading of SWF assets that include compiled bytecode (ABC).
The expectation here is that all versions of the Flash runtime should handle SWF reloading with ABC in the same way, so that a single codebase can be used to target web and iOS (or any other platform). This is the only issue of the 3 that has a legitimate work around, in my opinion, because the assets can be cached within the app within a loading manager layer. All the application code that makes loading calls can stay the same, and a compiler flag can be used to enable this caching for iOS builds, with subsequent requests returning a new instance of the cached asset. This can potentially lead to a very bloated memory footprint for the running app after a period of time, though, which could make some apps perform poorly, so a bugfix is ultimately needed.
3. Unimplemented feature (?) - The constraint that a single ApplicationDomain is used when running AIR for iOS
I did ask about this in the same forum post as SWF reloading but didn't get an Adobe response. Why does this constraint exist? My guess is that the AIR runtime for iOS simply hasn't implemented multiple ApplicationDomain support at this point, and that this was done to focus resources on other high priority features for the iOS runtime. It's possible that there is some aspect of the iOS operating system that makes it difficult or impossible to implement this feature, which may be why it's been avoided to this point, but obviously this is all conjecture without hearing from Adobe on it.
This is a major issue that needs to be addressed. For us, the problem is that our SWFs for multiple instances of the same type of asset use the same name for the AS export. For example, each item an avatar can equip is a single SWF with multiple sub assets -- the parts which comprise the item. Each of the parts will have an AS export name based on the avatar facing and where it is equipped, like "fv_head". This naming is consistent across all items, so we will load a lot of assets containing "fv_head" simultaneously. This normally works fine because the default behavior for Flash has always been that each SWF is loaded into a new ApplicationDomain instance, but for iOS a single ApplicationDomain must be used, causing these names to collide. The last SWF loaded containing a given AS export name overwrites the previous ones of that name.
The work around for this, and I use that term loosely, is to go through and uniquely name every AS export in every asset where sets of assets with the same export name is used. For us that is hundreds of items with multiple exports. Maintaining unique naming across all these parts is also a very error prone process, not to mention all the code that manipulates the parts needs to be modified to handle the new naming and make sure it's referring to the now uniquely named assets.
The expectation here is that all versions of the Flash runtime should handle asset loading in the same way and place each loaded asset into its own ApplicationDomain container as the default behavior. I'd like an Adobe employee to address my assumption that this is an unimplemented feature of AIR for iOS at this point, and let the community know if a solution for this will be implemented.
Summary
All three of these issues in combination are a major roadblock to porting existing Flash games to iOS with AIR. Issues with one can make it hard to test and try to work around others. All need to be fixed, but If I could only pick one of these to fix, it would have to be issue 3 -- that lack of proper ApplicationDomain support when loading assets. This issue is completely inconsistent with standard Flash behavior and creates a major roadblock to ports of existing applications with no viable solution for a workaround.
I look forward to Adobe's feedback on each of these issues and hopefully fixes that will allow those of us working with AIR for iOS to get our products to market.About the 3rd issue being an AoT design limitation, I'm not sure I understand why it's necessary to know during AoT packaging what the domain is that a child will be loaded into to be able to have SWF loading work as on the browser.
Isn't the ApplicationDomain an internal construct in the AIR runtime that you guys define in order to manage namespaces of loaded SWFs? To be clear, when I say "runtime" I know that the resulting code isn't being interpreted within the iOS app, but clearly you have a set of AIR libraries that get compiled into the IPA that provides support for all the Flash APIs. If that's the case, then wouldn't it be possible for the iOS version of the AIR libraries to define a new ApplicationDomain on the fly when code that has been cross-compiled to iOS native code loads a packaged SWF?
I don't have a clear picture of how ApplicationDomains are managed internal to the runtime of course, but a little more detail would be very helpful. Thanks. -
Procedure to Overwrite Existing Reports in Salesforce
I've been looking around and can't seem to find the proper procedure for overwriting existing reports in Salesforce. While we are on that topic, what is the procedure for uploading new reports? What needs to be checked, filled out, clicked?
Whenever I try to overwrite a report, it says there was a database connection error. I have to delete the report and re-upload it.To add a bit more to what Steve wrote:
While we are on that topic, what is the procedure for uploading new reports?
It depends on the report and it's data source. If you are using an onpremise data source, you would need to have implemented the Open Data Connector on site and then you can set your reports to point to that web service. The other option there is for reports from Excel files that exist in crystalreports.com. There is another forum post on that topic. For Salesforce.com reports, I cover that below.
What needs to be checked, filled out, clicked?
For Salesforce.com, you typically don't need to check anything related to the data source. crystalreports.com will automatically know about the data source. When a user runs the report, it will automatically use their Salesforce.com security token to run the report.
If you want, you are able to "hard-code" the user credentials for the report. To do that, you can check the "Other data source" radio button and then input your user name/password. The password is encrypted and masked. In this case, you want to very careful as to which users have access to that report. Some customers use this to give some access to Salesforce.com data in a report that users might not have access to within Salesforce.com itself.
Do make sure that you do not upload a report with saved data unless you intend users to see that "snapshot" of data. Otherwise, the report does not refresh by default.
Whenever I try to overwrite a report, it says there was a database connection error. I have to delete the report and re-upload it.
I thought I remember seeing something before happening with a report that I was trying to overwrite. It was not consistent so I was not sure if it was just something wrong with my report. What I did to resolve it was to overwrite the report with some .rpt file that did not use a Salesforce.com data source. Then I overwrote it again with the intended Salesforce.com data source report. I believe that reset the connection properly. -
Need to create procedure for insert tax line into ra_interface_lines_all
Dear
I need to create a procedure for insert a tax line into ra_interface_lines_all against the line type "LINE".
after inserting the record i will run the auto invoice program to see the changes. kindly share how i can achieve through procedure.
scenario:-
after order dispatch workflow back ground run and data populated in ra_interface_lines_all where interface line id is null there i need to insert tax line against multiple orders.
I know the join. when line type = 'LINE' then tax line must have link_to_line_id of the line type line. my question is this when order number change how i can insert tax line against the line type line.
regards,
Fs
Message was edited by: 832296Dear
I need to create a procedure for insert a tax line into ra_interface_lines_all against the line type "LINE".
after inserting the record i will run the auto invoice program to see the changes. kindly share how i can achieve through procedure.
scenario:-
after order dispatch workflow back ground run and data populated in ra_interface_lines_all where interface line id is null there i need to insert tax line against multiple orders.
I know the join. when line type = 'LINE' then tax line must have link_to_line_id of the line type line. my question is this when order number change how i can insert tax line against the line type line.
regards,
Fs
Message was edited by: 832296 -
Educator discount on existing family plan?
I recently was hired on at a university. I've submitted the appropriate Verizon form to find out what percentage I can save on service. While I wait on the answer, I have a question that I hope the community will be able to help me with.
Can I add the educator discount to an existing family plan? If yes, does my name need to be the billing name? If the educator discount cannot apply to the entire plan, can it apply to just my particular line?Hi there Simon_berube!
Oh how I love discounts! I'm excited for you to get word back. When it comes to employee discounts you have to be the account owner (main name) of the account.
If you're not already, that's easy! We have a process called an Assumption of Liability where the current Account Owner provides permission for you to take over the account into your responsiblity.
Then we can apply your work discount.
Hope that clears that up for you!
Thanks,
MelissaM_VZW
Follow us on Twitter @vzwsupport -
Merging two existing individuals to another existing family plan?
Has anyone done this? I think I have read that any existing AT&T device can be upgraded to iPhone, with an extension of 2 yrs on each cellular number being upgraded. But moving in-contract individuals (2) to merge with an existing family talk plan involves terminating the two individual plans, doesn't it? Is there a penalty for this? Anything else I should know?
Thanks for any help.That's interesting. I just got off a support agent chat with "Cingular, the new AT&T", and they didn't mention the $18...
But the did say, that the 2 individual non-iPhone accounts, can be upgraded to iPhone and merged into another existing AT&T Family Talk plan, as long as they are in the same region. And these caveats exist... Each number upgraded and merged into the family talk plan will have its in-contract commitment extended by 2 yrs. And, each iPhone must purchase the appropriate data plan, which are in and of themselves, not-shared.
Hope this helps others, and thanks to bnbzone, and others who commented. -
Is it normal for changing your wireless plan on-line to be a disaster?
From my recent experience, I wonder if anyone should ever use the on-line option to change their plan.
I had a high usage month that caused me to go see what plan might be a better option for me. The on-line route is being pushed hard by Verizon, so I thought I would give it a try.
It recommended (and continues to recommend) that I switch from the Nationwide Talk & Text - 700 plan to the Share Everything Unlimited Talk, Text & 8GB plan. It says that my monthly bill will be $10.96 cents a month cheaper if I do this.
So back in August I made the change on-line while chatting with a representative on-line. The whole thing was a disaster.
First, my work email feature (Good Messaging) was missing, as was the case for my wife as well. It took several calls over several days to get that fixed, and of course there were additional charges for the feature. While the cost of the feature was actually considerably less under the new plan than the old one I never saw a lower bill; that $10.96 savings turned into $30+ of additional cost! No one has been able to tell me what happened there.
But the biggest disaster of making the change was that I was apparently asked somewhere along the way whether the change should be made "retroactively". Either I missed the question or what it meant was not well explained. The result was it was not done retroactively and I was hit with $116.10 of overage charges for switching to the unlimited plan on-line! (I can only hope that if I had talked to a representative rather than doing this on-line they would not even have asked me whether I wanted to pay an additional $116.10 for no particular reason.)
I made many calls to try to undo the overage thing. Everyone I spoke to agreed that it made no sense and that it should get reversed. Some months later my request was quietly (I had to make my periodic call to inquire about it) denied, which was the first I had heard that denial was even a possibility!
I must say that I am very disappointed in all of this. Is this normal?!Well thanks for the response, but I wonder whether you read my post.(?) It was because of the online option that I incurred overage charges, had my corporate email disrupted, and ended up with a plan that cost me more than I was paying rather than less, all entirely against my desire.
What makes it all worse is that I had to spend many more hours on the phone with Verizon to try to get this corrected and have never been able to to my satisfaction. A lot of time spent for an absence of service leaves me profoundly dissatisfied.
I understand that someplace in the online process a question was apparently asked with insufficient explanation that I somehow answered as, "Please bill me an extra $116.10." This alone seems like a really good reason to never use the online option since, again, I cannot imagine I would have had this problem doing it on the phone. Not being able to correct this errant answer is a sad statement on Verizon customer support. -
Question on sort behavior when inserting ACL lines into existing ACL
Hello,
I have a request / need to insert lines into existing ACLs (some standard, some extended) and I need to control where they are added (we want some to go to the top, some in the middle, some second from bottom).
I'm trying to understand / follow how ACL lines are added / sorted. I have three examples of different configs (standard ACL) where someone inserts lines into the existing ACL.
The problem is, it does not follow the guidelines I've found on cisco.com - i.e. using Sequence #s if specified, they don't all get added to the bottom, etc.
How can I determine how a line added to an existing ACL will behave?
I've added new ACLs, and as far as I can tell, for those examples, it will follow the sequence #s for both standard and extended acls, but not at all for these examples.
thanks!
-ChrisThere's a tutorial on creating client-side XSLT pages here: http://www.adobe.com/devnet/dreamweaver/articles/display_xml_data.html.
I'm not sure if it will work with a template. Unfortunately, XSLT is a mind-bender that tends to do serious damage to the average brain. That's why most people use server-side technology to deal with XML.
You mention that XSL isn't supported on your PHP server. What about SimpleXML? That's standard in all PHP 5 installations. Don't say your server is still running PHP 4. Support for PHP 4 was dropped nearly two years ago. -
Requirment class & Procedure for each schedule line category
Hi all,
In requirment class we have a switch on/off indicator for avai check and TOR.In define procedure for schedule line category also we have the same.
If I dont want the system to carry out availabilty check, I can switch off the indicator in requirment class or at schedule line category.
My question is why we have these indicators in 2 places.
It is written we can fine tune these settings at Define procedure for schedule line category settings
Could anyone explain in details with Business scenarious
Thanks in advance
ManoHi,
1. Availability check at Requirements Class level -
The requirements class contains all control features for planning such as relevance for
planning, requirements planning strategy and requirements consumption strategy.
In addition, it is specified at a global level whether an availability check is to take place for
the material in the sales and distribution documents on the basis of the ATP quantity
(ATP = available to promise) and whether requirements are to be passed on.
2. Availability check at Schedule line category level -
A finer degree of control can be obtained for sales documents using the schedule line category.
Replenishment lead time is only included in the check performed on the basis of the
ATP quantity.
You can control with the schedule line category whether an availability check and
transfer of requirements should be carried out in the sales documents.
Note -
1. At the global requirements class level, the availability check can only be switched on in combination with the transfer of requirements. At schedule line level, the settings are proposed from the requirements class.
2. If the availability check is switched on at requirements class level, it can be switched off at schedule line level. However, you cannot switch on the availability check at schedule line level, if it is switched off at requirements class level. You can make this setting at schedule line level. But the system ignores it and the setting for the requirements class applies.
3. Also, at schedule line level when the availability check is switched on, the transfer of requirements can be switched off. For example, this makes sense for inquiries or sales information.
4. The settings specific to schedule lines for performing an availability check are only relevant for sales documents. In the shipping documents, the settings from the requirements class and the delivery item category are used. As with the schedule line category, the availability check can be switched off as required in the delivery item category.
regards
bhaskar -
Different Tax base in pricing procedure for a single sales order for different line item material.
Hi,
I have a scenario wherein in a sales order, for two different material, the tax base of pricing should get triggered on the basis of sold to party and the material entered at line item level.
Logic triggers on the basis of Region of Customer & a unique field in the Material Master but problem comes in the calculation of Tax base as the sequence of condition type (from – to) is already defined in the pricing procedure to pick from a particular step but in second line item the base is different i.e. the sequence of condition types that are maintained in pricing procedure should be different for Tax to calculate differently.
Kindly suggest if the same can be handled in a single pricing procedure and dynamically taking care of condition type sequence through Alt Cal Base Formula, so far I’ve tried both Alt Cal Formula & Base but it is not working
Client doesn’t want to go ahead by creating two different orders (through separate Pricing Procedure) for that. They want to have both materials in same order.
Kindly suggest a suitable way to handle this scenario.
Regards,
Aashika AgarwalHi,
Click on the ''check availability'' button at item overview and then click on ''One-time delivery'' on the top. This will ensure that you will have only one delivery for whatever quantity is confirmed on that date.
If you want to apply this rule for all orders across a sales area, then you can do the below configuration step :
SPRO->sales and distribution->basic functions->availability check with ATP logic->Define default settings-> Here in avail. checking rule select A (one time delivery). This will ensure that all orders created for a particular sales area will have only one delivery.
Hope this helps.
Regards,
Palani -
Creation of a new pricing procedure by copying existing one (for sale order
Hi,
Existing pricing procures are here below:
1000 10 00 1 1 ZBRI01 Pricing Proc_Under Con 1000 10 00 1 2 ZBRI02 Pricing upgradationFlat
Now I need to create a new pricing procedure for the following combination :
1000 10 00 1 3 ZBR103 Pricing_single sale
Please let me know the steps to follow.
With regards,
ParijathaDear JP,
Based on your last direction, I created a pricing procedure. It is hitting the right GL and everything looks ok. My problem is " ZCAR (car park value which is a ZFREE item should get added to the "Net value" which is not happening. Control data -reference step overview is herebelow. From step 50 to 300 all are ticked for Statistics.
50 0 ZBAV Base Value for Calc 0 0 0 0 0
110 0 ZTCO Apartment Value 0 0 0 0 0
115 0 ZDSQ Discount on ApT 0 0 0 0 0
120 0 ZDVA Discount on ApT_Lump 0 0 0 0 0
150 0 ZTGR Terrace/garden Stat 0 0 0 0 0
160 0 ZDTG Discount on Terrace 0 0 0 0 0
210 0 ZCAR Car Park (booking) 0 0 0 0 0
250 0 Total Consideration 110 210 0 0 0
270 0 ZGOV Govt Rate_Reg 0 0 0 0 164
300 0 Upgradation Value - Billing 250 270 0 0 0
310 0 ZBLD Building - For Bill 270 0 0 0 164 ZBB
320 0 ZSDT Reg and Stamp Duty 0 0 0 0 0 ZSD
330 0 ZSDA Stamp duty-Agr-Sell 0 0 0 0 0 ZSA
340 0 ZECH Power Consump. Chgs 0 0 0 0 0 ZEC
350 0 ZLFE Legal Fees 0 0 0 0 0 ZLF
360 0 ZPTX Property Tax 0 0 0 0 0 ZPT
Can you please help me what should I do to add ZCAR (item category is ZFREE) value to Net value.
With regards,
Parijatha -
I need format for data in excel file load into info cube to planning area.
Hi gurus,
I need format for data in excel file load into info cube to planning area.
can you send me what should i maintain header
i have knowledge on like
plant,location,customer,product,history qty,calander
100,delhi,suresh,nokia,250,2011211
if it is right or wrong can u explain and send me about excel file format.
babuHi Babu,
The file format should be same as you want to upload. The sequence of File format should be same communication structure.
Like,
Initial columns with Characteristics (ex: plant,location,customer,product)
date column (check for data format) (ex: calander)
Last columsn with Key figures (history qty)
Hope this helps.
Regards,
Nawanit -
I travel regularly to Asia and I have been trying to compile everything I need into my iPad. Unfortunately, most of my hotels do not have wireless in the rooms just an LAN line. Does anyone know of a router (as small as possible) that I can plug an LAN line into that will convert it to a wireless signal I can access with the iPad. What I don’t want is to have to plug the router into a computer and program it forevery different LAN line I encounter. Thoughts???
As the others have said, Airport Express is one option. The catch as Allan said is that the configuration utility doesn't run on the iPad. It is rumored that iOS5 may have the utlity, but that doesn't help you now. If you can wait, then the Airport Express would arguably be the best for the iPad.
If you can't wait, you could get the D-Link DAP-1350. You configure it through a webpage, similar to how you would other home routers.
http://www.dlink.com/products/?pid=DAP-1350
I use the older DWL-G730AP 802.11g version and it's been very good to me for use by my Macbook Pro and iPad1. -
How to skip existing execution plan for a query
Hi,
I want to skip existng execution plan for a query which I am executing often. I dont want it to use the same execution plan everytime. Please let me know if any method is there skip the existing execution plan.
Thanks in advance.......
Edited by: 900105 on Dec 1, 2011 4:52 AMChange the query so it is syntactically different, but has the same semantics (meaning). That way CBO will reparse it and you might get a new execution plan.
One simple way to do that is to add a dummy predicate ( 45=45) to the where clause. The predicate must be changed every time the query is executed ( 46=46 , 47=47 ,… ).
Iordan Iotzov
http://iiotzov.wordpress.com/
Maybe you are looking for
-
Closing value negetive at mb5b
hi While checking day wise opening/reciept/issue/closing of diferent material at [MB5B], We found closing qty is negetive. I have checked negetive stock indicator at material level and it's not set. For beter understanding kindly see the mb51 report
-
Just wondering I just made a dvd from tape on my camcorder which is min dv. The picture quality of the dvd is not as good as when you play the tape onto the TV using the camera. In other word the dvd picture quality is not as good as the mini dv is t
-
How can I play my itunes music files on Hama Internet Radio? My Hardware: iMac Maverick and iPad 2
Hardware: iMac OSX Maverick, ipad 2, iOS 8.1.2, iPhone 5, IOS 8.1.2 Internat Radio: Hama DIR 3100 How can I play my itunes music files on my internet radio? Is there an App for iPad or iMac? Thanks ursulaanna
-
Dear all i faced a problem during unzipping file with multiple parts and the error message is " 1 archive had fatal errors " but it didn't mention which part how can i know which part has this fatal error ? thank you
-
how do i copy my media player library into itunes, only the songs that i have put on my computer from a cd went across, the ones i have downloaded wont work in itunes. any way to make them all work?