Procedure to Export schema using DATA PUMP
Hi All,
This is pandiarajan and i want to know the procedure to export schema using datapump in oracle 10g.
Please help me
Thanks in Advance
expdp directory=<xxxxx> dumpfile=<yyyyyyy> schemas=<schema name>
Similar Messages
-
EXPORT ONLY TABLES IN A SCHEMA USING DATA PUMP
Hi folks,
Good day. I will appreciate if I can get a data pump command to export only TABLE oBJECT in a specific shema .
The server is a 4 node RAC with 16 CPU per node.
Thanks in advanceIf all you want is the table definitions, why can you use something like:
expdp user/password direcory=my_dir dumfile=my_dump.dmp tables=schama1.table1,schema1.table2,etc content=metadata_only include=table
This will export just the table definitions. If you want the data to, then remove the content=metadata_only, if you want the dependent objects, like indexes, table_statistics, etc, then remove the include=table.
Dean -
Import schemas using data pump
Hi
I have taken full schema export dump using exp ..
(expdp username/password directory=dump dumpfile=scott.dmp schams=scott)
When i try to import this dump into another schema , i am getting the error user scott doesn't exist.. How to over come this.. put ur ideas and suggestions
following is the command i tried:
(impdp username/pasword directory=dump dumpfile=scott.dmp)
(impdp username/pasword directory=dump dumpfile=scott.dmp schemas=test)Hi
You can watch the documentation for import.
http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96652/ch02.htm#1005922
Think you have to use the "FROMUSER", "TOUSER" clause for import.
Hope it helps -
Error while exporting a schema using data pump
Hi all,
I have 11.1.0.7 database and am using expdp to export a schema. The schema is quite huge and has roughly about 4 GB of data. When i export using the following command,
expdp owb_exp_v1/welcome directory=dmpdir dumpfile=owb_exp_v1.dmp
i get the following error after running for around 1 hour.
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.UNLOAD_METADATA [TABLESPACE_QUOTA:"OWB_EXP_V1"]
ORA-22813: operand value exceeds system limits
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW$WORKER", line 7839
----- PL/SQL Call Stack -----
object line object
handle number name
4A974B9C 18237 package body SYS.KUPW$WORKER
4A974B9C 7866 package body SYS.KUPW$WORKER
4A974B9C 2744 package body SYS.KUPW$WORKER
4A974B9C 8504 package body SYS.KUPW$WORKER
4A961BF0 1 anonymous block
4A9DAA4C 1575 package body SYS.DBMS_SQL
4A974B9C 8342 package body SYS.KUPW$WORKER
4A974B9C 1545 package body SYS.KUPW$WORKER
4A8CD200 2 anonymous block
Job "SYS"."SYS_EXPORT_SCHEMA_01" stopped due to fatal error at 14:01:23
This owb_exp_v1 user has dba privileges. I am not sure what is causing this error. I have tried running it almost thrice but in vain. I also tried increasing the sort_area_size parameter. Even then, i get this error.
Kindly help.
Thanks,
VidhyaHi,
Can you let us know what the last object type it was working on? It would be the line in the log file that looks like:
Processing object type SCHEMA_EXPORT/...
Thanks
Dean -
Oracle 10 g Datbase export problem using Data Pump
I am using Oralce 10 g on SOlaris 10 OS.I installed Oracle 10 G on Soalris suucessfully (without ASM).But when I tried to take the export using OEM faclity i.e:
OEM>Maintennace>High Avaiablity >Data Movement >Export to Export File
At last screen we got following error:-
ORA-39006: internal error Exception : ORA-39006: internal error ORA-06512: at "SYS.DBMS_SYS_ERROR", line 79 ORA-06512: at "SYS.DBMS_DATAPUMP", line 2926 ORA-06512: at "SYS.DBMS_DATAPUMP", line 3162 ORA-06512: at line 2 .
Please help me to sort it out.
Reagrds
R N sharmaIt refers to some issues with datapump utility.
Check Note:402053.1 - Internal error during EXPDP ORA-39006 -
How to create/import a target schema from a source schema using data pump?
I have seen some examples where schema remapping will be done through remote link which I cannot as both the target schema and source schema are in same machine ...but I am not sure how to do it with out using remote link? I would be great if some one could provide a example
Thanks in AdvanceI'm not sure what you are asking here, but I'll try to give some examples on remapping a schema:
expdp prived_user/password schemas=orig_schema_1 directory=dpump_dir dumpfile=orig_schema_1.dmp
impdp prived_user/password schemas=orig_schema_1 directory=dpump_dir dumpfile=orig_schema_1.dmp remap_schema=orig_schema_1:new_schema_1
If you want to try without a dumpfile then you need a loop back dblink. (A dblink on your database that points to the same database. This would be your command:
impdp prived_user/password schemas=orig_schema_1 directory=dpump_dir network_link=loop_back_link remap_schema=orig_schema_1:new_schema_1
Hope this helps. If not, can you explain your question a little more?
Dean -
Import table to differnet schema using data pump
Hello All,
I am trying to export a table from schema MIPS_MDM and import it to MIPS_QUIRINO schema in different database. I am getting the below error.
expdp MIPS_MDM/MIPS_MDM@ext01mdm tables=QUARANTINE directory=DP_EXP_DIR dumpfile=quarantine.dmp logfile=qunat.log
To Import
impdp MIPS_QUIRINO/MIPS_QUIRINO@mps01dev tables=QUARANTINE directory=DP_EXP_DIR dumpfile=quarantine.dmp logfile=impd.log
Please can I know what is the exact syntax to import in the differnet schema.
thanks.Error when importing is
To Import
impdp MIPS_QUIRINO/MIPS_QUIRINO@mps01dev tables=QUARANTINE directory=DP_EXP_DIR dumpfile=quarantine.dmp logfile=impd.log
ORA-39166: Object MIPS_QUIRINO.QUARANTINE was not found.
Please can I know what is the exact syntax to import in the differnet schema.
thanks. -
What are the 'gotcha' for exporting using Data Pump(10205) from HPUX to Win
Hello,
I have to export a schema using data pump from 10205 on HPUX 64bit to Windows 64bit same 10205 version database. What are the 'gotcha' can I expect from doing this? I mean export data pump is cross platform so this sounds straight forward. But are there issues I might face from export data pump on HPUX platform and then import data dump on to Windows 2008 platform same database version 10205? Thank you in advance.On the HPUX database, run this statement and look for the value for NLS_CHARACTERSET
SQL> select * from NLS_DATABASE_PARAMETERS;http://docs.oracle.com/cd/B19306_01/server.102/b14237/statviews_4218.htm#sthref2018
When creating the database on Windows, you have two options - manually create the database or use DBCA. If you plan to create the database manually, specify the database characterset in the CREATE DATABASE statement - http://docs.oracle.com/cd/B19306_01/server.102/b14200/statements_5004.htm#SQLRF01204
If using DBCA, see http://docs.oracle.com/cd/B19306_01/server.102/b14196/install.htm#ADMQS0021 (especially http://docs.oracle.com/cd/B19306_01/server.102/b14196/install.htm#BABJBDIF)
HTH
Srini -
How to export resource manager consumer groups using Data Pump?
Hi, there,
Is there any way to export RM Consumer Groups/Mappings/Plans as part of a Data Pump export/import? I was wondering because I don't fancy doing it manually and I don't see the object in the database_export_objects view. I can create them manually, but was wondering whether there's an easier, less involved way of doing it?
MarkHi,
I have not tested it but i think a full db export/import (using data pump or traditional exp/imp) may help doing this (which might not be feasible for you to have full exp/imp) because full database mode exports/imports SYS schema objects also, so there is a chance that it will also import the resource group and resource plans.
Salman -
Exporting whole database (10GB) using Data Pump export utility
Hi,
I have a requirement that we have to export the whole database (10GB) using Data Pump export utility because it is not possible to send the 10GB dump in a CD/DVD to the system vendor of our application (to analyze few issues we have).
Now when i checked online full export is available but not able to understand how it works, as we never used this data pump utility, we use normal export method. Also, will data pump reduce the size of the dump file so it can fit in a DVD or can we use Parallel Full DB export utility to split the files and include them in a DVD, is it possible.
Please correct me if i am wrong and kindly help.
Thanks for your help in advance.You need to create a directory object.
sqlplus user/password
create directory foo as '/path_here';
grant all on directory foo to public;
exit;
then run you expdp command.
Data Pump can compress the dumpfile if you are on 11.1 and have the appropriate options. The reason for saying filesize is to limit the size of the dumpfile. If you have 10G and are not compressing and the total dumpfiles are 10G, then by specifying 600MB, you will just have 10G/600MB = 17 dumpfiles that are 600MB. You will have to send them 17 cds. (probably a few more if dumpfiles don't get filled up 100% due to parallel.
Data Pump dumpfiles are written by the server, not the client, so the dumpfiles don't get created in the directory where the job is run.
Dean -
Using Data Pump when database is read-only
Hello
I used flashback and returned my database to the past time then I opened the database read only
then I wanted use data pump(expdp) for exporting a schema but I encounter this error
ORA-31626: job does not exist
ORA-31633: unable to create master table "SYS.SYS_EXPORT_SCHEMA_05"
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT", line 863
ORA-16000: database open for read-only access
but I could by exp, export that schema
My question is that , don't I can use Data Pump while database is read only ? or do you know any resolution for the issue ?
thanksYou need to use NETWORK_LINK, so the required tables are created in a read/write database and the data is read from the read only database using a database link:
SYSTEM@db_rw> create database link db_r_only
2 connect to system identified by oracle using 'db_r_only';
$ expdp system/oracle@db_rw network_link=db_r_only directory=data_pump_dir schemas=scott dumpfile=scott.dmpbut I tried it with 10.2.0.4 and found and error:
Export: Release 10.2.0.4.0 - Production on Thursday, 27 November, 2008 9:26:31
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-39006: internal error
ORA-39065: unexpected master process exception in DISPATCH
ORA-02054: transaction 1.36.340 in-doubt
ORA-16000: database open for read-only access
ORA-02063: preceding line from DB_R_ONLY
ORA-39097: Data Pump job encountered unexpected error -2054
I found in Metalink the bug 7331929 which is solved in 11.2! I haven't tested this procedure with prior versions or with 11g so I don't know if this bug only affects to 10.2.0.4 or 10* and 11.1*
HTH
Enrique
PS. If your problem was solved, consider marking the question as answered. -
Migration from 10g to 12c using data pump
hi there, while I've used data pump at the schema level before, I'm rather new at full database imports.
we are attempting a full database migration from 10.2.0.4 to 12c using the full database data pump method over db link.
the DBA has advised that we avoid moving SYSTEM and SYSAUX objects. but initially when reviewing the documentation it appeared that these objects would not be exported from the target system given TRANSPORTABLE=NEVER. can someone confirm this? the export/import log refers to objects that I believed would not be targeted:
23-FEB-15 19:41:11.684:
Estimated 3718 TABLE_DATA objects in 77 seconds
23-FEB-15 19:41:12.450: Total estimation using BLOCKS method: 52.93 GB
23-FEB-15 19:41:14.058: Processing object type DATABASE_EXPORT/TABLESPACE
23-FEB-15 20:10:33.185: ORA-31684: Object type TABLESPACE:"UNDOTBS1" already exists
23-FEB-15 20:10:33.185: ORA-31684: Object type TABLESPACE:"SYSAUX" already exists
23-FEB-15 20:10:33.185: ORA-31684: Object type TABLESPACE:"TEMP" already exists
23-FEB-15 20:10:33.185: ORA-31684: Object type TABLESPACE:"USERS" already exists
23-FEB-15 20:10:33.200:
Completed 96 TABLESPACE objects in 1759 seconds
23-FEB-15 20:10:33.208: Processing object type DATABASE_EXPORT/PROFILE
23-FEB-15 20:10:33.445:
Completed 7 PROFILE objects in 1 seconds
23-FEB-15 20:10:33.453: Processing object type DATABASE_EXPORT/SYS_USER/USER
23-FEB-15 20:10:33.842:
Completed 1 USER objects in 0 seconds
23-FEB-15 20:10:33.852: Processing object type DATABASE_EXPORT/SCHEMA/USER
23-FEB-15 20:10:52.368: ORA-31684: Object type USER:"OUTLN" already exists
23-FEB-15 20:10:52.368: ORA-31684: Object type USER:"ANONYMOUS" already exists
23-FEB-15 20:10:52.368: ORA-31684: Object type USER:"OLAPSYS" already exists
23-FEB-15 20:10:52.368: ORA-31684: Object type USER:"MDDATA" already exists
23-FEB-15 20:10:52.368: ORA-31684: Object type USER:"SCOTT" already exists
23-FEB-15 20:10:52.368: ORA-31684: Object type USER:"LLTEST" already exists
23-FEB-15 20:10:52.372:
Completed 1140 USER objects in 19 seconds
23-FEB-15 20:10:52.375: Processing object type DATABASE_EXPORT/ROLE
23-FEB-15 20:10:55.255: ORA-31684: Object type ROLE:"SELECT_CATALOG_ROLE" already exists
23-FEB-15 20:10:55.255: ORA-31684: Object type ROLE:"EXECUTE_CATALOG_ROLE" already exists
23-FEB-15 20:10:55.255: ORA-31684: Object type ROLE:"DELETE_CATALOG_ROLE" already exists
23-FEB-15 20:10:55.256: ORA-31684: Object type ROLE:"RECOVERY_CATALOG_OWNER" already exists
any insight most appreciated.Schema's SYS,CTXSYS, MDSYS and ORDSYS are Not Exported using exp/expdp
Doc ID: Note:228482.1
I suppose he already installed a software 12c and created a database itseems - So when you imported you might have this "already exists"
Whenever the database is created and software installed by default system,sys,sysaux will be created. -
Select table when import using Data Pump API
Hi,
Sorry for the trivial question, I export the data using Data Pump API, with "TABLE" mode.
So all tables will be exported in one .dmp file.
My question is, then how to import few tables only using Data Pump API?, how to define "TABLES" property like command line interface?
should I use DATA_FILTER procedures?, if yes how to do that?
Really thanks in advance
Regards,
KahlilHi,
You should be using metadata_filter procedure for the same.
eg:
dbms_datapump.metadata_filter
(handle1
,'NAME_EXPR'
,'IN (''TABLE1'', '"TABLE2'')'
{code}
Regards
Anurag -
Best Approach for using Data Pump
Hi,
I configured a new database which I set up with schemas that I imported in from another production database. Now, before this database becomes the new production database, I need to re-import the schemas so that the data is up-to-date.
Is there a way to use Data Pump so that I don't have to drop all the schemas first? Can I just export the schemas and somehow just overwrite what's in there already?
Thanks,
NoraHi, you can use the NETWORK_LINK parameter for import data from other remote database.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_import.htm#i1007380
Regards. -
Good Morning All,
I would like to export schema with data to another.
Any help?
Thanks in advance,
EB NYIf you have a few tables...quick and dirty way is to
create new_table as select * from old_schema.tableOtherwise depending on what version you are on and you have access, use exp/data pump.
Alot of good pages on using expdp but the general syntax is
1st, make the directories
connect / as sysdba
grant create any directory to org_schema_user;
create or replace directory dump_directory as '/my_directory_on_the_file_system/';
grant read, write on directory dump_directory to org_schema_user;
grant read, write on directory dump_directory to new_schema_user;export
expdp user/password schemas=start_schema directory=dump_directory dumpfile=my_dmp_file.dmp logfile=my_dmp_file_export.logimport
impdp new_user/password remap_schema=old_schema:new_schema directory=dump_directory dumpfile=my_dmp_file.dmp logfile=my_dmp_file_import.log
Maybe you are looking for
-
Qiv not work after system update
error message: zhiwen ~/ qiv /doc/img/1.jpg Gdk-ERROR **: BadMatch (invalid parameter attributes) serial 115 error_code 8 request_code 2 minor_code 0 Locking assertion failure. Backtrace: #0 /usr/lib/libxcb-xlib.so.0 [0xb7b02767] #1 /usr/lib/libxc
-
Loading data file Flat file to Oracle DB
I have 600/700 MB datafiles on AIX box which need to upload to Oracle using ODI. I am considering the below KMs ...which would be more appropriate in this case LKM File to Oracle LKM File to Oracle (EXTERNAL TABLE) Why should we use LKM File to Oracl
-
Ranch Billing, the excise condition type JMOD calculation is wrong
Hi I wish to know that in case of Branch Billing, the excise condition type calculation is wrong!! I am surprised and unable to know how it could be? In billing document display (T.code VF03) , Out of 3 Line items, Basic Excise Duty of 2 line items/
-
How do I Erase & Install from the Install CD?
It's a long story but I need to do an Erase & Install on my new Intel iMac. I originally used Migration Assistant and my system is running super slow. People have suggested that perhaps I shouldn't have used Migration Assistant. So now I just want to
-
Overlaying text, shapes to images
I'm editing together pieces of a presentation that include screen captures of activity on my PC. I need to overlay hollow rectangles, ovals, and arrows at various points to highlight different regions of the screen. I've found how to add one rectangl