Process ADD(increment) using SSIS for a dimension with two Key columns

Hi,
I'm trying to add data to the existing dimension using Process ADD increment (SSIS data flow). The dimension has 2 key columns (ID and Timestamp) and when I do a full process for a particular day the dimension run's fine, but when I try
to add data for the next day using Process Add(increment) from SSIS I'm getting error like   
And Yes, I will have same ID's of the first day for the next day as well but with a different Timestamp, so for that I have set the
Key not found  to "Ignore errors". But still I see the above error. Below is my DSV
Can anyone help me on how to approach on this. 

Hi K.Kalyan,
According to your description, you get the above error when executing the ProcessAdd data flow task. Right?
In this scenario, since you have same ID for one which is differed on Timestamp, it can cause duplicated key issue so that it will throw this error. Please change the "Duplicate Key" error action to "Report and continue"
(recommended) or "Ignore error" to resolve this issue. 
Reference:
Dimension processing failing (Incremental)
FIX: "Internal error: An unexpected error occurred" when you run a "Process" command against the TFS SSAS cube
Best Regards, 
Simon Hou
TechNet Community Support

Similar Messages

  • How can I use NSDictionaryControllers for 2 dicts with common key?

    I have two dictionaries, both with the same key. Using Interface Builder I can build for each dictionary a two-column table, but I did not find out how to connect their keys so that selecting a line in one table automatically selects the corresponding line in the other table.
    Does there exist a binding between the two controllers that solves the problem? If so, how can it be established?
    (First I tried to use only ONE table - with 3 columns:. This appeared to me the best way. But again I could not establish the appropriate binding.)

    I assume you are using a UITableView to show your data. Remember that the table view does not store your data, only shows a few rows of your collection.
    I would detect a selection in one table, then programatically select the row with the same key in the second table. There would be no connection in IB to do that.
    Mobile table programming guide:
    Table View Programming Guide for iOS
    General programming guide:
    Table View Programming guide
    Jason

  • When I use SSIS for extract from OLAP Database, then the error random occurred,Error Code = 0x80040E05

     I have tired for this!
    When I use SSIS for extract data from ssas, that means,I use mdx query.
    then random error occured.
    Hope some one can understand my poor English....
    And the Error Info show below.
    Code Snippet
    Error: 0xC0202009 at Data Flow Task - For Individual User Tech Points, OLE DB Source 1 1 [31]: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80040E05.
    An OLE DB record is available.  Source: "Microsoft OLE DB Provider for Analysis Services 2005"  Hresult: 0x00000001  Description: "Error Code = 0x80040E05, External Code = 0x00000000:.".
    Error: 0xC004701A at Data Flow Task - For Individual User Tech Points, DTS.Pipeline: component "OLE DB Source 1 1" (31) failed the pre-execute phase and returned error code 0xC0202009.

    I have had the same error on SQL2008 and now on SQL2012 SSIS, but have been able to eliminate / workaround.
    We have a Loop Container in our Control flow that contains a data-flow task with an MDX source. The MDX query for the data-flow source is dynamically built (via an expression) on each iteration of the Loop container (however it always returns the "same shaped"
    results - only the filters in the WHERE clause are different).
    We've found the error to be somewhat intermittent - sometimes the package will complete successfully, other times it will fail with the 0x80040E05 error at varying iterations thru the container loop.
    To alleviate the problem we setup the SQL Agent job-step for this package to re-try on failure for up to 5 retries - not an ideal workaround, but it helped to improve the success rate of the Job.
    We have no idea why this error is occurring or what is causing it, however it appears to be timing-related in some way and I have only seen the issue when using a SSAS OLE-DB data source with a dynamically generated MDX query. I have managed to virtually
    eliminate the error from occurring with a not ideal workaround in the SSIS package - no idea why this works/helps (hopefully Microsoft will be able to work it out and resolve the issue as it's been plaguing us since SQL2008 and is still here in SQL2012
    SP1...
    Workaround for MDX causing 0x80040E05 error:
    Within our loop container we have added a Script task with OnSuccess precedent constraint to the data-flow task that contains the dynamically generated MDX source query. The script task simply introduces a WAIT in the processing immediately after the
    data-flow task completes of about 5 seconds, before allowing SSIS to continue with the next iteration (e.g. System.Threading.Thread.Sleep(5000)).
    With this delay in place we have had much more stable SSIS package executions - dont know why, but that's what we havce observed. Also note that when we migrated to SQL2012 SSIS packages the 0x80040E05 error returned, however we were able to eliminate it
    once more by increasing the WAIT time to 10 seconds on this script task.
    Now waiting for 10 seconds is not an ideal solution / workaround to this problem - particularly when it is contained within a Loop Container (in our case it has added nearly 30 minutes of "WAIT time" to the package execution duration), however this workaround
    is better than having the package fail 80%+ of the time...
    regards,
    Piquet

  • How can I use TopLink for querys that have two and more tables?

    I use TopLink today, and I can use one table to query, but how can I use TopLink for querys that have two and more tables?
    Thank you for see and answer this question.

    You can write a custom SQL query and map it to an object as needed. You can also use the Toplink query language "anyOf" or "get" commands to map two tables as long as you map them as one to one (get command) or one to many (anyOf command) in the toplink mapping workbench.
    Zev.
    check out oracle.toplink.expressions.Expression in the 10.1.3 API

  • I have an old iphone and have a new one as well. I would like to use my old on as an ipod but itunes not longer recognizes it.  Any ideas?  I have been using it for a month with no problems until tonight. I restarted my computer..still no fix.

    I have an old iphone and have a new one as well. I would like to use my old on as an ipod but itunes not longer recognizes it.  Any ideas?  I have been using it for a month with no problems until tonight. I restarted my computer..still no fix.

    Looks like its fixed.     I am syncing it now.      A lot of the answers are for the new iphone so i had to mess with a bunch of settings as well.  My old phone is now an 8 gig ipod.  the books app no longer works and that *****.....but better than nothing...

  • My iphoto will not open for some reason. the cursor just keeps running...been using this for 3 years with no problem. It started doing this after I tried to load some photos from a camera I have successfully used before

    I cannot open my Iphoto on my macbook pro. I have used it for three years with no problem. However, after trying to load some pictures from my camera it seems to have frozen up. I force quit it and have not been able to get past the opening blank window since ...cursor still blinking as if it is downloading or trying to open.

    What version of iPhoto?

  • Hello I bought a G-Raid GR4 4000 4 TB and used it for a backup with my new Imac27. Now this is all I get. "Time Machine couldn't complete the backup to "G-RAID". to complete backup. An error occurred while creating the backup folder.

    Hello I bought a G-Raid GR4 4000 4 TB and used it for a backup with my new Imac27. Now this is all I get. "Time Machine couldn’t complete the backup to “G-RAID”. to complete backup. An error occurred while creating the backup folder."
    Any idea what I should do?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    If all you see are messages that contain the word "Starting," you didn't clear the search box.
    If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Some personal information, such as the names of your files, may be included — anonymize before posting.

  • I been using viber for a long with no problems until today it's restarting on its own and once I enter the code it try's to sync contact it restarts again.  I tried reinstalling but it's still the same. Please replay ASAP

    I been using viber for a long with no problems until today it's restarting on its own and once I enter the code it try's to sync contact it restarts again.  I tried reinstalling but it's still the same. Please replay ASAP

    Contact Viber customer or technical support regarding a problem with their iOS app.

  • I've been using IMac for 3 years with Microsoft office. Today, I could not open any excel files? Any Ideas?

    I've been using IMac for 3 years with Microsoft office. Today, I could not open any excel files? Any Ideas?

    If you upgraded to Lion or Mountain Lion, and did not upgrade to Office 2008 or later, that may be part of the problem.  Try LibreOffice, OpenOffice, NeoOffice, Google Docs, or Zoho Docs.  See my FAQ* for link:  http://www.macmaps.com/crossplatform.html

  • What index is suitable for a table with no unique columns and no primary key

    alpha
    beta 
    gamma
    col1
    col2
    col3
    100
    1
    -1
    a
    b
    c
    100
    1
    -2
    d
    e
    f
    101
    1
    -2
    t
    t
    y
    102
    2
    1
    j
    k
    l
    Sample data above  and below is the dataype for each one of them
    alpha datatype- string 
    beta datatype-integer
    gamma datatype-integer
    col1,col2,col3 are all string datatypes. 
    Note:columns are not unique and we would be using alpha,beta,gamma to uniquely identify a record .Now as you see my sample data this is in a table which doesnt have index .I would like to have a index created covering these columns (alpha,beta,gamma) .I
    beleive that creating clustered index having covering columns will be better.
    What would you recommend the index type should be here in this case.Say data volume is 1 milion records and we always use the alpha,beta,gamma columns when we filiter or query records 
    what index is suitable for a table with no unique columns and primary key?
    col1
    col2
    col3
    Mudassar

    Many thanks for your explanation .
    When I tried querying using the below query on my heap table the sql server suggested to create NON CLUSTERED INDEX INCLUDING columns    ,[beta],[gamma] ,[col1] 
     ,[col2]     ,[col3]
    SELECT [alpha]
          ,[beta]
          ,[gamma]
          ,[col1]
          ,[col2]
          ,[col3]
      FROM [TEST].[dbo].[Test]
    where   [alpha]='10100'
    My question is why it didn't suggest Clustered INDEX and chose NON clustered index ?
    Mudassar

  • For All Entries with two tables

    Hi All,
             Can we use FOR ALL ENTRIES with two tables. for example
    SELECT * FROM MKPF INTO TABLE T_MKPF
             WHERE BUDAT IN S_BUDAT.
    SELECT * FROM MARA INTO TABLE T_MARA
             WHERE MTART IN S_MTART AND
                            MAKTL IN S_MAKTL.
    SELECT * FROM MSEG INTO TABLE T_MSEG
           FOR ALL ENTRIES IN  "T_MKPF AND T_MARA"
                  WHERE MBLNR EQ T_MKPF-MBLNR AND
                                 MATNR EQ T_MARA-MATNR.
    can we do it like this or any other way to do this plz tell. I waitting for your responce.
    Thanks
    Jitendra

    Hi,
    u cannot do like this....chek some documentation on it..
    1. duplicate rows are automatically removed
    2. if the itab used in the clause is empty , all the rows in the source table will be selected .
    3. performance degradation when using the clause on big tables.
    Say for example you have the following abap code:
    Select * from mara
    For all entries in itab
    Where matnr = itab-matnr.
    If the actual source of the material list (represented here by itab) is actually another database table, like:
    select matnr from mseg
    into corresponding fields of table itab
    where ….
    Then you could have used one sql statement that joins both tables.
    Select t1.*
    From mara t1, mseg t2
    Where t1.matnr = t2.matnr
    And T2…..
    So what are the drawbacks of using the "for all entires" instead of a join ?
    At run time , in order to fulfill the "for all entries " request, the abap engine will generate several sql statements (for detailed information on this refer to note 48230). Regardless of which method the engine uses (union all, "or" or "in" predicates) If the itab is bigger then a few records, the abap engine will break the itab into parts, and rerun an sql statement several times in a loop. This rerun of the same sql statement , each time with different host values, is a source of resource waste because it may lead to re-reading of data pages.
    returing to the above example , lets say that our itab contains 500 records and that the abap engine will be forced to run the following sql statement 50 times with a list of 10 values each time.
    Select * from mara
    Where matnr in ( ...)
    Db2 will be able to perform this sql statement cheaply all 50 times, using one of sap standard indexes that contain the matnr column. But in actuality, if you consider the wider picture (all 50 executions of the statement), you will see that some of the data pages, especially the root and middle-tire index pages have been re-read each execution.
    Even though db2 has mechanisms like buffer pools and sequential detection to try to minimize the i/o cost of such cases, those mechanisms can only minimize the actual i/o operations , not the cpu cost of re-reading them once they are in memory. Had you coded the join, db2 would have known that you actually need 500 rows from mara, it would have been able to use other access methods, and potentially consume less getpages i/o and cpu.
    In other words , when you use the "for all entries " clause instead of coding a join , you are depriving the database of important information needed to select the best access path for your application. Moreover, you are depriving your DBA of the same vital information. When the DBA monitors & tunes the system, he (or she) is less likely to recognize this kind of resource waste. The DBA will see a simple statement that uses an index , he is less likely to realize that this statement is executed in a loop unnecessarily.
    Beore using the "for all entries" clause and to evaluate the use of database views as a means to:
    a. simplify sql
    b. simplify abap code
    c. get around open sql limitations.
    check the links
    http://www.thespot4sap.com/articles/SAPABAPPerformanceTuning_ForAllEntries.asp
    The specified item was not found.
    Regards,
    Nagaraj

  • Creating a DNS Record for a Host with Two or More IP???

    Can we create DNS A Record for a Host with Two or More IP ... ( we like to use my website  "mysite.com" pointing to two Ips )
    Please help...

    Sure, no worries.
    In a production environment DNS will query always the first record it will stores in cache, you need to find a dynamic or NLB way to achieve the automatic fail over else when you will have an outage with the first IP, then you need to ask your clients to
    clear the cache and register to DNS again, this i will not suggest in a production environment, lots of manual efforts and doesnt sound like a solution in a production environment, i would suggest you to explore windows NLB, it's easy to set and use the OS
    license.
    Thanks
    Inderjit

  • Can i use my ipod 4th generation with two computers?

    can i use my ipod 4th generation with two computers?

    iTunes- How to move the library to an EHD
    Recovering your iTunes library from your iPod or iOS device
    iTunes- Back up your iTunes library by copying to an external hard drive

  • Using SSIS for Access Database

    I have a Database in Access and I want extract data from this database into SQL Server 2008 R2 using SSIS. Then i want to use Analysis Services for Facts and Dimension Tables. Then i want to load the extracted data into a web application and want to use
    Reporting Services for reports. Can anybody help me in SSIS and Analysis Services and Reporting Services?

    Ok just help me, I want to extract data from single table of access given below and then i want to make facts and dimension tables . Kindly help me in populating these fact and dimension tables using Analysis Services.
    ConsumerID
    ReferenceNo
    OldAccountNo
    Name
    RelationWith
    RelationwithName
    Address
    ConnectionDate
    RegionType
    Circle
    Division
    SubDivision
    Feeder
    GridStation
    Company
    Tariff
    Load
    PresentReading
    PreviousReading
    UnitsConsumed
    CostofElectricity
    ElectricityDuty
    PTVFee
    GST
    IncomeTax
    ExtraTax
    FurtherTax
    NJSurcharge
    FPAMonth
    FPA
    GSTonFPA
    ITonFPA
    EDonFPA
    Arrears
    Installment
    Subsidies
    TotalFPA
    CurrentBill
    LPSurcharge
    PayableWithinDueDate
    PayableAfterDueDate
    BillingMonth
    DueDate
    1
    1242
    4242
    Nasir
    S/o
    Mohiuddin
    Hyderabad
    01-Jan-07
    Urban
    Hyderabad-I
    Garikhata
    Garikhata
    JAMSHORO 1
    66KV DIGRI
    HESCO
    A2(a)
    4
    7000
    5000
    2000
    32000
    480
    60
    5521.6
    200
    Jul-08
    45
    7.65
    0.675
    53
    38262
    3248
    38315
    41563
    Jan-09
    03-Jan-09
    2
    1234
    1234
    Kashif
    S/o
    Mohsin
    Jamshoro
    01-Jan-09
    Urban
    Hyderabad-II
    Garikhata
    Garikhata
    AMRI (SHAL.) 1
    66KV TANDO GHULAM ALI
    HESCO
    A1(a)
    1.75
    451
    400
    51
    295.29
    4.42935
    35
    50.9522895
    5.1
    Jul-08
    45
    7.65
    0.675
    53
    391
    30
    444
    474
    Jan-09
    03-Jan-09
    3
    1235
    1235
    Afzal
    S/o
    Mohsin1
    Jamshoro
    01-Jan-09
    Urban
    Hyderabad-II
    M.P.Khas .
    Liaquat Colony
    HALA ROAD 3
    132KV SAMARO
    HESCO
    A1(a)
    1.8
    250
    50
    200
    1622
    24.33
    35
    279.8761
    20
    Jul-08
    45
    7.65
    0.675
    53
    1981
    165
    2034
    2199
    Jan-09
    03-Jan-09
    4
    1236
    1236
    Akbar
    S/o
    Basit
    jamshoro
    01-Jan-10
    Urban
    Hyderabad-I
    Digri
    Hali Road
    HALA ROAD 11
    132KV JHIMPIR
    HESCO
    A1(a)
    1.95
    801
    500
    301
    3711.33
    55.66995
    35
    640.3899915
    30.1
    Jul-08
    45
    7.65
    0.675
    53
    4472
    377
    4525
    4902
    Jan-09
    03-Jan-09
    5
    1237
    1237
    Qaisar
    S/o
    Nazeer
    Hyderabad
    01-Jan-08
    Urban
    Hyderabad-I
    Kotri
    Samaro
    HYD N.P.T.S. 11
    132KV MIRPUR KHAS
    HESCO
    A1(a)
    2
    750
    700
    50
    289.5
    4.3425
    35
    49.953225
    5
    Jul-08
    45
    7.65
    0.675
    53
    384
    29
    437
    466
    Jan-09
    03-Jan-09

  • Unable to process downpayment request (F-47) for the vendor with the PO

    Hi All,
    We are not able to process the advance payment request for the vendor 450004398 with the PO 3000086605 due to below mentioned error
    " You cannot use this transaction type to post this asset.u201D After getting error we double click that error we got these full information.
    The traanction type entered type entered belongs to transaction type group 15, According to the specifications for this transactipn type group,posting with trasnction types belonging to this group are only allowed in specifi asset classes ( for asset classes for asset under construction)
    The asset to which you are posting belongs to class group
    Above error we are facing, we checked "OAYB" also that asset class in maintained in that transaction code.
    Awaiting for your reply
    Thanks
    Ram
    09769004602

    Hi Ram,
    Please check AO90 and OAYB
    In AO90 you should assign one Asset GL Account.
    for this: go to AO90 select you chart of accounts and double click on acocunt Determination select your asset determination against which asset you are paying down payment and double click on Balance sheet accounts there you need to assign under acquisition account assginment  * Acquisition:Down Payment* and Down Payment clearing Account. This is  only  for AUC.
    In OAYB select 15 Down payment and double click on specification of asset class there you need assign your asset class.
    Hope this will help you.
    Regards,
    Schilukuri

Maybe you are looking for