Process and Session

I have set the below parameter value in oracle 10g
Processes: 20
Sessions: 20
AFter setting the above value when I start the database and queries
session parameter values shows: 27
Based on the above parameter how many concurrent users can connect to the database.

If the maximum number of user connections I wanted by database to be able to handle is 100 then I would set processes = 100 and let Oracle calculate the number of sessions.
If you use PQO and the job queue (dbms_scheduler) you may need to adjust the numbers based on actual experience but the above would be a logical starting point.
How your Oracle is licensed, named user vs cpu, and how your application works could result in your needing to choose different values but again the above should work as a starting point and for many lightl load systems should be adequate.
HTH -- Mark D Powell --

Similar Messages

Oracle db 11g r2 Configuration of processes and session

I recently installed Oracle DB 11g R2 and 50,000 users connect to this database suggest me what would be basic configurations .
Processes and sessions parameters for database are 5000 and 5505 but it is little lagging now so if its possible i want to make it maximum of processes and sessions or automatic .

50,000 users getting connected concurrently? How many users/sessions remain active at any given point of time?
For such high userbase/sessions better to go with share server configuration, since I cannot assume that even 10% of the users will be active at any given point of time so better to use shared servers and dispatchers.

Maximim Number of process and session can set in oracle 10g

my os is 32 bit windows and ram size is 10gb and i am using AWE_WINDOW_MEMORY setting and now my sga is 6 gb.what would be Maximim Number of process and session can set in oracle 10g database

mithun wrote:
my os is 32 bit windows and ram size is 10gb and i am using AWE_WINDOW_MEMORY setting and now my sga is 6 gb.what would be Maximim Number of process and session can set in oracle 10g databaseThe maximum number of sessions is controlled by your database's SESSIONS parameter. This value is most derived from the PROCESSES parameter. You cannot exceed this number of sessions unless you raise the parameter value.
If your database is configured to handle enough sessions, then Oracle can literally handle thousands of simultaneous connections, provided your database server also has enough resources to handle this number of connections. You will want to implement Oracle's Shared Server connections so that multiple connections share a pool of processes on the database server. This minimizes the resource consumption used by the connections.
Read the following document as well.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/manproc.htm
Thanks

How to set Processes and Session parameter

Hi All,
I have to check the optimal value for the Parameter "processes" and "session" for my database server,
existing value for Processes is 500 and sessions is 1000.
Oracle application: 12.0.6
database 10.2.0.4 2 node RAC.
and i wanted to know how many " jdbc connection" can be done for the 12GB RAM and Quad core two CPU machine,
Pl let us know any doc/Thumb rule to set the above.
Thanks and Regards
Vasu

Hi,
I wanted to check what is the maximum limit of the "processes" for my existing resource. is my 500 processes itself is exhasted the resources.The maximum limits are mentioned in the database reference manual.
Process and Runtime Limits
http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/limits004.htm#i288165
Oracle 10g Documentation Library
http://www.oracle.com/pls/db102/homepage
Kindly let me know any SQL query or supporting document to set the processes and session parameters.Did you review the initialization document referenced above? I believe it shows the value you need to set for processes and session parameters. For the query, you can query v$parameter or issue "show parameter <parameter name>" from SQL*Plus.
Regards,
Hussein

What is the relationship between Process and Session parameter in Oracle

Hi All
I ran into a problem
"ORA-00020: maximum number of processes (150) exceeded " on the other day and I want to fix this temporary by increase the process by some number like 200.
Someone suggesting the syntax to fix my problem then the database must restart after running this command.
alter system set processes=200 scope=spfile;
However, I check the v$Paramenter view I see 2 values I believe they go together are
Processes: 150
Sessions:170.
Here are my questions:
1. "alter system set processes=200 scope=spfile;" is the correct way to increase the max Processes?
2. Do I have change the number of Sessions after changing the number of Processes?
3. Is there other way to increase the processes number without reboot the Oracle database?
Regards,
Jdang

According to the Oracle version# Reference manual which documents the database parameters sessions is set to 1.1 * process + 5 using the 10gR2 version.
Basically an Oracle process cooresponds to an OS process that performs the actual work for the session.
An Oracle session is a collection of memory structure entries that identifies and keeps track of what is being done for a client of the Oracle database.
Sometimes a single background process will support multiple sessions even in dedicated server mode such as when recursive SQL is performed to support the DML statement being done in the session.
PS - you should consider increasing processes first and only increase sessions if you still have an issue.
HTH -- Mark D Powell --
Message was edited by: mdp add PS
mpowel01

Unable to kill work process and user sessions.

Hi Gurus,
Iam facing a different problem in my prd system.Dialog process of a particular user has been running continuosly for long time, when i killed it with cancel with core or with out core option in sm50 still it is starting automatically on different PID and going in to loop.Even though user is not logged in and no back ground jobs are running still the process is running on its own.Even i tried killing the PID from OS level using DPMON but was of no help.
I tried to kill the user session and log him out from sm04 from it was not happening, locked the user also but was of no help.
Has anybody faced this situation?Is there any option excluding restarting the system to solve this issue.
Thanks&Regards
Prashant

Hi Prashant,
In case of multiple instances you have to log off the user from system wide select this option from SM04 while deleting user session again look for the action in SM50 for the process and if possible get details by activating trace from ST05 and filter with user, wp.
Thanks,
Saleem

Problem with application item and session state

Okay, let's see if I can explain this problem coherently.
I have a small app (one page), with an application item, F_WHERE_CLAUSE.
This page has three regions in which there are items that the users can populate for search conditions. A couple of these items are "select list with submit" (I still need to upgrade to the AJAX method, I know). There is another region which has one hidden field, called P1_WHERE_CLAUSE. This field is defined to "Always, replacing any value in session state..." with source type of "Item (application or page.....", and a source value of F_WHERE_CLAUSE with no default value.
I have a button called "Search" which submits the page and fires a PL/SQL process which builds a where condition based upon the other page items and stores the value to the application item F_WHERE_CLAUSE (correctly).
For testing, I've made the P1_WHERE_CLAUSE field visible so that I can see what's going on. I've also clicked the debug and session buttons to help trace this. After I click the "Search" button and the page submits, debug shows:
0.02: ...Session State: Save "P1_WHERE_CLAUSE" - saving same value: "1=1"
followed later by:
0.05: ...Session State: Saved Item "F_WHERE_CLAUSE" New Value="lower(primary_class) = 'rock' and country = 'Spain'"
The field P1_WHERE_CLAUSE displays with the correct search criteria as signified by F_WHERE_CLAUSE above. However, If I click the "session" button to view the session state values, P1_WHERE_CLAUSE shows up as:
P1_WHERE_CLAUSE Textarea 1=1 U while F_WHERE_CLAUSE displays the correct value still.
The reason this "problem" came up, is that this page also has three SQL report regions which use &P1_WHERE_CLAUSE. for the where condition. While they display the correct results on-screen, each report region also has the "Export to csv" enabled, and the export seems to be using the "1=1" condition (from the "session" window) instead of the search criteria that the on-screen region is using (F_WHERE_CLAUSE and the displayed P1_WHERE_CLAUSE), resulting in a retreival of all records.
Anybody have any idea what's going on and why, and how to get the csv export to use the correct value for the where condition?
Thanks,
Bill Ferguson

It appears the "Export to CSV" functionality requires the item value to be set in session state. The P1_WHERE_CLAUSE item value never gets saved to session state. The page is rendered and the value is put in the item on the page but until you submit the page session state doesn't know what P1_WHERE_CLAUSE is.
Create a before header computation or process to set the value of P1_WHERE_CLAUSE (which will save it to session state). It is interesting that the report regions didn't need to look at the value in session state but the "export to csv" does.
--Jeff

Question on App Process and Java script performance

I have quick question regarding performance of Application process and Javascript.
I'm having OnDemand Application process, which fetches data from db and thru javascript
in page, i'm invoking the application process.
My question is :
If I did not render a page say for 10 mins, and i'm changing field values in my tab report.
Consider i'm having a huge record in my tab report and changing certain updatable column value for all records.
Once i finsished updating the field value (before hitting submit). The same field might have been updated by someother user.
If i render the page, Would it shows data as per current session value or data same as 10 mins before?
Bit confused on this.
Your views on this would be highly appreciated!!
Thanks!
Vijay

... one more reason not to use Tabular Forms.
I'm not sure this is related to performance. I think this is more of a lost update question. If you're using a standard Tabular Form, APEX will check the value of that data in the database to see if it's changed since you opened it. If so, it means someone else edited the data then saved it since you opened the page. APEX will return an error. At that point, the user would have to reload the whole page. If you expect collisions and the fields are big enough that it will take a person a long time to edit, I would strongly suggest NOT using Tabular Forms. If you're only editing one row at a time, the chance of collision between you and another users is substantially less than if you were both editing 15 rows at a time. Also, if there is a collision, you only have to reload one record, not a whole set of them.
Tyler

ERROR MESSAGE sap system manager:work process restarted, session terminated

Hi,
i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue. Here are the details
SAP Version :ideas 4.7
Database :Oracle
OS : windows 2003
Module user is working on MM
user working on it is a Super user with all the permissions
SAP is configure to run under the European date and decimal format.
I have never done any database administration on it, it is a new install and has been rarely used.
User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
Below are the details of the error message from ST22 :
name of the runtime error : system_core_dumped
below are the details of the error message and its resoltion as suggested by sap help :
========
Runtime Errors         SYSTEM_CORE_DUMPED
       Occurred on     01.02.2008 at 07:52:19
Process terminated by signal " ".
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPLCLSC" had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
                                                                                Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An SAP System process was terminated by an operating system signal.
                                                                                Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
           Last error logged in SAP kernel
                                                                                Component............ "Taskhandler"
Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 9555
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
                                                                                2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
System environment
SAP Release.............. " "
Application server....... " "
Network address.......... " "
Operating system......... " "
Release.................. " "
Hardware type............ " "
Character length......... " " Bits
Pointer length........... " " Bits
Work process number...... " "
Short dump setting....... " "
Database server.......... " "
Database type............ " "
Database name............ " "
Database owner........... " "
Character set............ " "
SAP kernel............... " "
Created on............... " "
Created in............... " "
Database version......... " "
Patch level.............. " "
Patch text............... " "
Supported environment....
Database................. " "
SAP database version..... " "
Operating system......... " "
User, transaction...
Client.............. " "
User................ " "
Language key........ " "
Transaction......... "ME41 "
Program............. "SAPLCLSC"
Screen.............. "SAPMM06E 0320"
Screen line......... 71
Information on where termination occurred
The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".
The main program was "SAPMM06E ".
The termination occurred in line 131 of the source code of the (Include)
program "LCLSCF2G"
of the source code of program "LCLSCF2G" (when calling the editor 1310).
=============
i even tried increasing the dialog processes but with no use.The same error occurs.
I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
thanks
mudessir.

Hi
   follow correction method suggested in this dump,
" The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'. Save this file under another name."
have you done this?
with regards,
raj.
<i>pls, award points</i>

Processing the session in background

Hi experts,
I have created a BDC program in session method. Once i executed the program, it creates a session name.
Then i select the corresponding session name in SM35 and process it in background.
But i dont want to goto SM35 and process the session explicitely.
How to process the session in background without going to SM35 tcode?
Regards,
Shanthi

Hi shanti,
check with below code... but one point keep remember. when your trying to post a question check SDN and if your not succeeded then only post the question. so it will avoid the duplicate postings on the same topic i am right ?.
Hi,
Use this sample code
DATA: RUNTIME TYPE I. "Runtime
DATA: GROUP LIKE APQI-GROUPID, " Mappenname
BDCIMMED LIKE RFIPI-BDCIMMED, " nur BDC: sof. Abspielen
BDCSTRTDT LIKE TBTCJOB-SDLSTRTDT, "nur BDC: Startdatum
BDCSTRTTM LIKE TBTCJOB-SDLSTRTTM. "nur BDC: Startzeit
form mappe_abspielen_im_batch.
GET RUN TIME FIELD RUNTIME.
JOBNAME = 'RFEBFD00-FIEB'.
JOBNAME+14 = RUNTIME.
eak-point.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
JOBNAME = JOBNAME
JOBGROUP = 'FIEB'
IMPORTING
JOBCOUNT = JOBCOUNT
EXCEPTIONS
CANT_CREATE_JOB = 01
INVALID_JOB_DATA = 02
JOBNAME_MISSING = 03.
IF SY-SUBRC NE 0.
MESSAGE E015 RAISING SESSION_NOT_PROCESSABLE.
ENDIF.
SUBMIT RSBDCSUB AND RETURN
USER SY-UNAME
VIA JOB JOBNAME NUMBER JOBCOUNT
with mappe = group
WITH MAPPE = BI-NAME
WITH VON = SY-DATUM
WITH BIS = SY-DATUM
WITH Z_VERARB = 'X'.
BDCSTRTDT = SY-DATUM.
BDCSTRTDT = SPACE.
BDCSTRTTM = SPACE.
BDCIMMED = 'X'.
bdcstrttm = runtime.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
JOBNAME = JOBNAME
JOBCOUNT = JOBCOUNT
STRTIMMED = BDCIMMED
SDLSTRTDT = BDCSTRTDT
SDLSTRTTM = BDCSTRTTM
EXCEPTIONS
CANT_START_IMMEDIATE = 01
JOBNAME_MISSING = 02
JOB_CLOSE_FAILED = 03
JOB_NOSTEPS = 04
JOB_NOTEX = 05
LOCK_FAILED = 06.
IF SY-SUBRC NE 0.
MESSAGE E015 RAISING SESSION_NOT_PROCESSABLE.
ENDIF.
CLEAR BDCIMMED.
BDCSTRTDT = SPACE.
BDCSTRTTM = SPACE.
~lingannna

Error in CALL TRANSACTION and SESSION Method

I have 8 records (1,2,3,4,5,6,7,8) to update into SAP database using CALL TRANSACTION and SESSION Method. If there is a error in 6th record. What happens in both call transaction and session method.
Please let me know which records will process and what about the error record. How to process only the error record if all other records have updated into database.

Hi Patil_sumeet,
if your code for this is not protected secret of some federal agency, you may read [How to post code in SCN, and some things NOT to do...|How to post code in SCN, and some things NOT to do...; and then post relevant lines here.
According to the facts presented until know it may have been better to ask Radio Eriwan
Regards
Clemens

How to read the messages from the processed Batch session log

Hi All,
I am posting an accounting document through FB01 by submitting the report RFBIBL00 along with the file through which a Batch session gets generated in SM35.The Batch session is then processed by submitting the report RSBDCSUB. My code is as shown below:
SUBMIT rfbibl00 WITH ds_name = co_file_output
                  WITH callmode = co_batch AND RETURN.
Process Batch session
SUBMIT rsbdcsub
    WITH mappe = gv_name_jd
    WITH von   = sy-datlo
    WITH bis   = sy-datlo
     AND RETURN
My requirement is to capture the document number from the log of the processed batch session. Can anyone suggest me how to go about this.
Thanks in Advance,
Vinay B

Hi,
check the routine read_bdc_log_plain in program rsbdc_protocol.
get the data from table APQL and then use the logic.
        bapiret2-id = logtable-logmessage+74(16).
        bapiret2-number = logtable-logmessage+94(3).
        bapiret2-message_v1 = logtable-logmessage+100(20).
        CALL FUNCTION 'BAPI_MESSAGE_GETDETAIL'
          EXPORTING
            id         = bapiret2-id
            number     = bapiret2-number
            textformat = 'ASC'
            message_v1 = bapiret2-message_v1
          IMPORTING
            message    = bapiret2-message.
        WRITE: (60) bapiret2-message.
Edited by: Keshav.T on Apr 7, 2010 4:23 PM

Rewrite process and remove the call to f-54 and replace with bapi proces

Hi Gurus,
Please help me to find the soultion.
The root cause of this continual problem is the design and use of BDC session for F-54. Is there a redesign possible with ECC6.0?
I wanted to rewrite the process and remove the call to f-54 and replace with bapi process.
if this is now possible in ECC 6.0
The benefit would be to better control what PO was used in the DP recoupment.
Thanking you,
Raju Singhireddy.

Hi Balaji,
Check this BAPI
BAPI_QUOTATION_CREATEFROMDATA
BAPI_QUOTATION_CREATEFROMDATA2
BAPI_CUSTOMERQUOTATION_CHANGE
Regards
Arun

How to set a limit on the number of processes a session can start?

I have an Oracle db version 10.2.0.4 running on Solaris 10. My parallel_max_servers parameter is set to 650 and the processes parameter is set to 700. But I don see one session that is spawning 129 processes and another one that is spwaning 65 processes. Is there a way to limit the number of processes that a session can spawn?

check processes
$ ps -ef | grep $ORACLE_SID|wc -l
SQL> select * from v$resource_limit where resource_name ='processes';
My parallel_max_servers parameter is set to 650 and the processes parameter is set to 700.
PARALLEL_MAX_SERVERS
specifies the maximum number of parallel execution processes and parallel recovery processes for an instance. As demand increases, Oracle increases the number of processes from the number created at instance startup up to this value.
Do you use query with parallel?
example:
-> create table xxx PARALLEL (degree 5)
-> select /*+ PARALLEL
if you don't use parallel on execution processes... so, your processes not increase ;)
By the way your db have limited proceses= 700 (Dedicated Server Processes)

Question on Processing Pattern Sessions - not behaving as expected

I have implemented some schedulable jobs in my extensible cache configuration that are scheduled at a fixed rate and then use the processing pattern to submit work to the grid.
However I am seeing some unexpected behaviour which does not seem to make much sense. My jobs are submitted to the grid as follows (some code edited for brevity):-
@Override
     public void run() {
          ProcessingSession session = null;
          try {
          session = new DefaultProcessingSession(StringBasedIdentifier.newInstance("MySession"));
          SubmissionOutcome outcome = session.submit(this, new DefaultSubmissionConfiguration(),
     new TaskSubmissionCallback(taskName));
          catch (Throwable t) {
               log.error("Failed to Submit Process Pattern Task [{}] For Session [{}]", taskName, nodeName);
          finally {
               try {
                    session.shutdown();
               catch (Throwable t) {
                    log.error("[{}] Failed to Shutdown Processing Pattern Session [{}]", this, nodeName);
My tasks get scheduled and then submiited and executed in the grid. I am currently only running a single node through eclipse for testing.
But after the task has excecuted my TaskSubmissionCallback class gets invoked and the onDone() gets called and returns my result:-
public void onDone(Object oResult)
     log.debug("[{}] Submission done - Result = [{}]", m_sTaskName, oResult);
So all is working. However a couple of milliseconds later I see the following in the logs:-
2012-04-03 17:15:50.407/19.274 Oracle Coherence GE 3.6.0.4 <Error> (thread=DistributedCache:DistributedServiceForProcessingPatternSubmissionResults:EventDispatcher, member=1): The following exception was caught by the event dispatcher:
2012-04-03 17:15:50.407/19.274 Oracle Coherence GE 3.6.0.4 <Error> (thread=DistributedCache:DistributedServiceForProcessingPatternSubmissionResults:EventDispatcher, member=1):
java.util.concurrent.RejectedExecutionException
     at java.util.concurrent.ThreadPoolExecutor$AbortPolicy.rejectedExecution(ThreadPoolExecutor.java:1760)
     at java.util.concurrent.ThreadPoolExecutor.reject(ThreadPoolExecutor.java:767)
     at java.util.concurrent.ScheduledThreadPoolExecutor.delayedExecute(ScheduledThreadPoolExecutor.java:216)
     at java.util.concurrent.ScheduledThreadPoolExecutor.schedule(ScheduledThreadPoolExecutor.java:366)
     at java.util.concurrent.ScheduledThreadPoolExecutor.execute(ScheduledThreadPoolExecutor.java:438)
     at com.oracle.coherence.patterns.processing.internal.DefaultProcessingSession.removeCacheObjectsAsynch(DefaultProcessingSession.java:313)
     at com.oracle.coherence.patterns.processing.internal.DefaultProcessingSession.handleResultChange(DefaultProcessingSession.java:288)
     at com.oracle.coherence.patterns.processing.internal.DefaultProcessingSession$1.onMapEvent(DefaultProcessingSession.java:204)
     at com.tangosol.util.MultiplexingMapListener.entryUpdated(MultiplexingMapListener.java:42)
     at com.tangosol.util.MapEvent.dispatch(MapEvent.java:270)
     at com.tangosol.util.MapEvent.dispatch(MapEvent.java:226)
     at com.tangosol.util.MapListenerSupport.fireEvent(MapListenerSupport.java:557)
     at com.tangosol.coherence.component.util.SafeNamedCache.translateMapEvent(SafeNamedCache.CDB:7)
     at com.tangosol.coherence.component.util.SafeNamedCache.entryUpdated(SafeNamedCache.CDB:1)
     at com.tangosol.util.MapEvent.dispatch(MapEvent.java:270)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ViewMap$ProxyListener.dispatch(PartitionedCache.CDB:22)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ViewMap$ProxyListener.entryUpdated(PartitionedCache.CDB:1)
     at com.tangosol.util.MapEvent.dispatch(MapEvent.java:270)
     at com.tangosol.coherence.component.util.CacheEvent.run(CacheEvent.CDB:18)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.Service$EventDispatcher.onNotify(Service.CDB:26)
     at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
     at java.lang.Thread.run(Thread.java:619)
I have managed to solve this by removing the session.shutdown() call in the class that submits the job for processing using the Processing Pattern. However this seems odd to me
as the submitter should not need to hang around until the job completes (as that is surely the point of the Callback handler). I can of course code around this by having a Singleton
class which keeps the Processing session alive constantly and stores this in the Environment. But the question is why ???
This is running Coherence 3.6 and coherence-processingpattern-1.3.423238.
Would be grateful to know if this is a bug or my understanding is somehow confused !
TIA
Martin

I agree, believe me. However, one goes to war with the army one has, not the army one wishes one had, to quote somebody who, um... okay, failed miserably. Hmm...
It's a flat-rate project, so the troubleshooting isn't costing them any more, and their IT department wags the rest of the company and won't buy stuff. Eventually they'll have CS4 and these problems will go away, but probably not until next year.
If I were willing to give up the CS4-specific features (which I'm not; maximum efficiency in long documents is the core competency of my business), working in CS3 still wouldn't be an option because I don't own it. I'm also not likely to be able to talk the client into the idea that I'll take care of the last-minute tweaks instead of their having to do it all.
(Keep in mind, too, that there's more behind the scenes than I'm necessarily sharing in a quick forum post. If I can keep the typesetting from shifting in the .inx for now, I'm good.)
I filed that bug report--thanks!
UPDATE: Client says it looks right. Off we go...

Process and Session

Similar Messages

Maybe you are looking for