Process chain did not stop at the failure step but continue till the end

Hi Gurus,
I have daily process chain which loads sem data
suddenly the process chain fails with an SEM issue and once i fix and repeat the process, the process completed and completes all processes in the chain but still the chain status is in red which doesn't allow to kick the subsequent chain.
For the same i again rerun the total local chain to get the PC status as green,
Can anyone face this issue and help me to know why we are getting this type of issue.

Hi Naresh,
You can very well follow this practice to automate the loads. following are the steps.
1. sa38 --> RSPC_PROCESS_FINISH.
2. fill in following parameters.
LOGID = (LOGID of current process chain execution)
TYPE = (process type of failed step)
VARIANT = (find value from failed chain step from background)
INSTANCE = (find value from failed chain step from background)
STATE = F (to mark it finish)
3. execute.
Please look into the below link for further details:
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Hope this Helps,
Thanks,
Amit Kr.

Similar Messages

Process Chains are not shown in QAS?

Hi all
Version : BI 7.0
I transported the process chain from DEV to TEST system and my transports are successful. But when i logon to test system and double click on my process chain ... i dont view my chain.
What could be the possible reason?
Please help me out.

Yes i did import to the right client. I can see my process chain name left side. But when i double click on it. It should show the process chain right side in the Planning view. But i dont my process chain there.
I re-transported and checked but still having the same issue

Process 000004 did not confirm within the permitted time period

Hi
The process chain failed while activating the ODS with an error message :Process 000004 did not confirm within the permitted time period" . When repeated the failed step it went successufull. but want to know what can be the cause and steps to be taken in order to avoide this issue further.
Thanks
Ratan

Hi,
Whenever ODS activation goes there'll be some batch processes you can say as parallel processes running along with main job. Due to unavailability of resources i.e either bkgd or dialog processes soemtimes gets delayed and they gets canceled which leads to the failure of main ODS activation job...
may be in ur scenario the same thing might have happened, so when you had repeated the step if the resources are free it will be successful.
once chk in your system for canceled jobs, ther might be some job which relates to your process.
rgds,

I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?

I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?

Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

HT1657 after renting a move and starting viewing I can not stop it and come back to in within the time frame. If i stop it it goes away not able to find it. Just like I did not rent it at all.

after renting a move and starting viewing I can not stop it and come back to in within the time frame. If i stop it it goes away not able to find it. Just like I did not rent it at all.

Hi,
We have rolled out a fix for this issue.
Please log off and log back in to your machine and the issue should be resolved automatically. In case that does not work, please manually run the msi installer posted here (may require reboot).
For details, please refer to the KB article here: Multiple RunOnce keys created 11.0.10 and 10.1.13 Acrobat | Reader
Please let us know if you still face any issues.
Thanks,
Ashu Mittal

Process chain was not getting trigerred

Hi Experts,
Chain "Weekly MSA Loads - Full Process" is not getting triggerred.
This chain is set to run after completion of ABAP program.
On 16th Jan, ABAP ptogram was successfully completed.Then ""Weekly MSA Loads - Full Process"" chain status was set to running (yellow). But no job was created. It got hung for more than a hour.
So we tried to trigger that chain with immedaiate option. We got an option "Server for scheduling". We didnt provide any server name. Then pressed Ok button. From then onwards, server went to refreshing state, but no job was created(BI_PROCESS_TRIGGER) and chain is not at all getting trigered.
We got the follwwing messages:
01/24/2009     06:49:48     Job started     S     00     516
01/24/2009     06:49:48     Step 001 started (program RSPROCESS, variant &0000000655878, user ID BWREMOTE)     S     00     550
01/24/2009     06:50:05     Communication buffer deleted from previous run 4CIS92GCZ3HQ5WVXKADF85TFQ (status X)     I     RSPC     87
01/24/2009     06:50:05     Version 'M' of chain ZPC_MSA_FULL_PROCESS was saved without checking     S     RSPC     19
01/24/2009     06:50:05     Version 'A' of chain ZPC_MSA_FULL_PROCESS was saved without checking     S     RSPC     19
So we cancelled that step (STOP transaction). From that day onwards this chain is not all getting trigerred in any way. We have checked the status of last log in RSPROCESSLOG table, its status is 'X'.
Please let us know to trigger this chain.

Hi........
U told a program gives trigger to this Chain.............that means the Process chain is event based..........just right click on the Start process >> Change Selections >> Click on After event.......just cross check.......
Now copy the event from there..........Just to cross check that whether this event is a part of any Event collector or not.............this may be one of the possibilities............bcoz........if this Event is a part of an event collector..........then until all events get regisretered..........this chain will not trigger........So......Go to SE16 >> table name RSEVENTHEAD >> there in the EVENT field give the event name >> execute............if it is a part of a event collector..............Copy the event collector name from there........
then go to RSA1OLD(if u r in BI 7.0 .....otherwise RSA1)............in the top TOOLS tab >> Event collector >> Press F4 in the Event Chain(Name) field........search for the event collector name here...............now check whether all the events got registered or not...........
Now look..........BI_PROCESS_TRIGGER is the trigger job............after completion of this job only the chain will trigger......How u checked that the job was not started...........in SM37?..........look if so ..then there will be many BI_PROCESS_TRIGGER jobs............it is quite difficult ti identify the right job..........So the best way is.............right click on the Start process >> Display messages >> BacKg tab >> Click on Batch Monitor.................there u will be able to find the BI_PROCESS_TRIGGER which is going to trigger that particular chain..............u r saying the job did'nt started.............was the Start process in release state............this may happen.............if load is huge at that time in the system............I mean if many jobs trigger at a time..........there will be no free work process........
Sometimes the chain may start when the loads will reduce.............otherwise u should contact the basis people................
Anyways............u trigger the JOb manually right.........here I want to tell u one thing..............never Scedule a time based or Event based chain by right clicking on the Start process........and from there Change selection..............I mean to say never change the Start variant..............What u should always do...............go to the Planning mode of the chain.......Right click on the stsrt process >> Display scheduled Jobs >> Take one Released job..........in the top Job tab >> Repeat scheduling >> Immedite >> Uncheck the periodic job Check box >> Check and save.........
If u do in this way.............the original settings of the chain will never change............what I guess .........that the Event is removed fro the Settings of the Start Variant..........again u hav to schedule the Chain.......
Hope this helps.........
Regards,
Debjani......

Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!! SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.

The issue: Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!!
SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.
The cause: It is now clear what caused this problem. For years I had several “all-day” events in my Outlook calendar (birthdays, anniversaries, etc.). In May 2012 I decided to make some of them one hour events so I could add alerts to remind me of the event. I did this by dragging them in Outlook to the time I wanted and expanding them to the time slot desired and then adding the alarm.
The symptom: Syncing stopped working for the calendar but continued working for contacts and notes. I didn’t realize sync was failing until months later when I missed two very important phone calls, so when I noticed it the cause was not obvious.
The failed attempts: I’m head of a software firm and my calendar sync is a crucial to my business life so I took this on with a vengeance. From a quick look at events in Outlook and the iPhone I could see that the problem started in May 2012. Events before May were in both Outlook and the iPhone but events after May were only one or the other. Unfortunately I had changed several other things at the same time relating to other events so again the cause was not obvious. MANY calls with AppleCare proved them incompetent so my internal IT guys assisted trying many things. We tried a huge number of calendar changes and several versions of iTunes, iPhone OS and Office as well as both iPhone 4 and 5, all without success.
The fix: After 18 months of frustration, MANY hundreds of $ expense and MANY hours of wasted time I saw a blog that had a calendar sync problem and it indicated all day events were related. I changed the display of the Outlook calendar to the list view, added columns so I could see “all day” event check marks as well as times of events, sorted on the “all day” event column to move them to the top, and for all events that were “all day” events AND had a start and end time, I removed recurrence and then added the annual recurrence back…
After I fixed all events that had BOTH “all day” set and had a start/end time, I tried another sync. It synced for the first time in 18 months!
Problem occurred May 2012 – fixed Nov 2013

Hi, to remove dummy '_ModGrp' entries, rather than crashing the 'Suppr' key on your keyboard, you can use this basic VBA macro (launched for instance from Excel).
It will recursively remove all '_ModGrp...' folders
Sub RemoveFolders_Click()
    Dim oOutlook As Outlook.Application
    Set oOutlook = New Outlook.Application
    Set objNameSpace = oOutlook.GetNamespace("MAPI")
    Call CleanFolders(objNameSpace.Folders)
End Sub
Sub CleanFolders(objFolders As Outlook.Folders)
    For i = objFolders.Count To 1 Step -1
        If Left(objFolders(i).Name, 7) = "_ModGrp" Then
            objFolders.Remove( i )
        Else
            If Not objFolders(i).Folders Is Nothing Then
                Call CleanFolders(objFolders(i).Folders)
            End If
        End If
    Next i
End Sub

RAC instance won't start: ORA-00443: background process "VKRM" did not star

I've logged a SR with Oracle, but while waiting for response from them...I'm stumped I can't find more out here about this article.
On Oracle knowledgebase...any search for VKRM, gives about the same 3 articles relating to RDA (Remote Diagnostic Assistant).
Not sure what went on here.
I have a 5 node RAC cluster. All other instances seem to be running just fine.
On one instance...some applications were getting an error like:
ORA-01033: ORACLE initialization or shutdown in progress
I looked in GRID...and it indicated that only two of the 5 nodes had this instance running...which was strange in that with srvctl, it showed ll 5 up and running:
[oracle@server2 bin]$ ./srvctl status database -d INSTANCE
Instance INSTANCE1 is running on node server1
Instance INSTANCE2 is running on node server2
Instance INSTANCE3 is running on node server3
Instance INSTNANCE4 is running on node server4
Instance INSTANCE5 is running on node server5
Anyway, thought I'd poke around. I started with trying to get srvctl to stop instance #2...in GRID it seemed that instance 2,4 and 5 weren't working.
srvctl stop instance -D INSTANCE -i INSTANCE2
This just hung...
I thought I'd cycle all the nodes...so, did a ctl-c out of that one, and did:
[oracle@server2 bin]$ ./srvctl stop database -d INSTANCE -o abort
PRCD-1124 : Failed to stop database INSTANCE and its services
PRCR-1065 : Failed to stop resource (((((NAME STARTS_WITH ora.instance.) && (NAME ENDS_WITH .svc)) && (TYPE == ora.service.type)) && ((STATE != OFFLINE) || (TARGET != OFFLINE))) || (((NAME == ora.instance.db) && (TYPE == ora.database.type)) && (STATE != OFFLINE)))
CRS-2675: Stop of 'ora.instance.db' on 'server5' failed
CRS-2675: Stop of 'ora.instance.db' on 'server4' failed
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
The ORA-01034 messages repeats a number of times...and the one with server4 and server5 repeated again too.
I also got this:
CRS-2680: Clean of 'ora.instance.db' on 'server2' failed
CRS-2675: Stop of 'ora.instance.db' on 'server5' failed
CRS-2675: Stop of 'ora.instance.db' on 'server4' failed
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
I get similar messages when I try to restart.
clusters seem to be up, and other instances seem to be ok
Looking at alert log...I found some strangeness in the traces
Starting background process VKRM
Errors in file /u01/app/oracle/diag/rdbms/instance/INSTANCE2/trace/INSTANCE2_dbrm_26982.trc:
ORA-00443: background process "VKRM" did not start
Errors in file /u01/app/oracle/diag/rdbms/instance/INSTANCE2/trace/INSTANCE2_ora_27467.trc:
ORA-00450: background process '' did not start
Errors in file /u01/app/oracle/diag/rdbms/instance/INSTANCE2/trace/INSTANCE2_ora_27467.trc:
ORA-00450: background process '' did not start
Error 450 happened during db open, shutting down database
USER (ospid: 27467): terminating the instance due to error 450
LGWR waiting for instance termination
Instance terminated by USER, pid = 27467
ORA-1092 signalled during: ALTER DATABASE OPEN...
opiodr aborting process unknown ospid (27467) as a result of ORA-1092
Looking at the trace listed above:
2011-05-09 12:17:18.305726 :84271119:db_trace:ksb.c@2157:ksbs1p_real(): [10254:6:464] KSBS1P: process DBRM trying to start background VKRM
2011-05-09 12:17:18.305729 :8427111A:db_trace:ksb.c@2220:ksbs1p_real(): [10254:6:464] KSBS1P: process DBRM obtained PR enqueue to start background VK
RM
2011-05-09 12:17:18.306021 :8427111D:db_trace:ksb.c@2354:ksbs1p_real(): [10254:6:464] KSBS1P: creation error posted OER(1089)
2011-05-09 12:17:18.306029 :8427111F:db_trace:ksb.c@2424:ksbs1p_real(): [10254:6:464] KSBS1P: out of loop: process did not start
Trace Bucket Dump End: default bucket for process 6 (osid: 26982, DBRM)
ORA-00443: background process "VKRM" did not start
kskdbrmpa: reply error 450
Any ideas? Again...I can't seem to find much of ANY information searching out there for the VKRM background process not starting...
Thanks in advance,
cayenne
Edited by: cayenne on May 9, 2011 11:34 AM

Anyone? Anyone? Bueller?
Ok..have been on phone with Oracle support, and have them stumped so far.
I've checked..other instances are running (except one other that failed to cleanly shut down with srvctl and same error messages).
I've check...ASM is running on all 5 nodes. I've used crsctl to check CRS on all nodes..clustering seems ok.
Memory while somewhat high...should have enough room...the system has never complained before, and this has been up on this config for over a year.
I was able on node one...to fire up the first nodes instance using the pfile there...it came up. I started it restrict..and promptly ran a datapump export, and then shut back down.
While Oracle support is going through logs and trace files I sent...I've got another 11Gr2 environment (3 node RAC) I've been using as a test environment...and am recreated the instance there temporarily to allow my developers to test and get past the upcoming deadline.
But, I'm still puzzled as to the solution on the main cluster. This seem to be normal, except these two instances....
any ideas on where and what to look for?
cayenne

When rendering a project, FCPX did not stop at 100% but appeared to keep rendering - when it reached eleven thousand something, I quite FCPX (it allowed me to quit).

When rendering a project, FCPX did not stop at 100% but appeared to keep rendering - when it reached eleven thousand something, I quite FCPX (it allowed me to quit).

The background tasks indicator just kept going and going... 200, 300... 400... 600...800... When I opened the background tasks window, the only process it said was active was rendering.
I clicked on "stop" but it ignored me, kept counting on and on.... 1000... 2000,,, 5000 I clicked Pause, it didn't ignore me but still kept counting... 7000... 10,000...
I went to my activity monitor on my mac and from what it said (like, 97% or so idle), I surmised that it actually had stopped rendering. So I quit FCPX - no problem, no "not responding" or "force quit" or anything.
My external harddrive was still whirring (that's where my project is stored) so with much trepidation I ejected it: no problem...
After my question I (agian with much trepidation) opened FCPX, did some editing, rendered, exported, without problems.
But I'm concerned about what might have caused this bizarre behavior and what to do if it happens again.
any thoughts???

High Availability Installation issue (ASCS instance did not stop)?

Hi,
We are facing an issues in High availability system installation. (ERP ECC6.0 EHP5) We have completed Node A installation.
We are installing based on Virtual IP.
Node A Installation:
Steps 1: ASCS instance
Step 2 : DB Instance
Step 3: Enqueue replciation Server istance
Step 4: Central instance
I have complete these steps successfully. But We have started Node B installation. We have faced error in Node B. Error is on ASCS instance.
Error Details: "SID/ASCS00(partially) did not stop. " In ASCS instance 5th phase, we are getting this error.
Due to this error, We are not able to continue the process.
Could you please help to solve this.
Thanks!!!

Hi Sir/Madam
I have one to install SAP cluster with two node with window server 2003 x64 R2, SQL server 2005.
below it is my step.
1. assume my window cluster and sql server are working fine.
2. I have start install ASCS on virtual disk from node 1.
3. i have install First MSCS on virtual from node 1.
4. I have install Database instance on virtual disk from node 1.
5. I have install Second MSCS on virtual from node2.
6 I have install ERS on physic disk on node 1.
7. i have instgall ERS on physic disk on node2.
8 i have install CI on physic disk on node 1
9 i have install DI on physic disk on node 2.
this is procedure that my consultant have set up on my real sap system . but when I try to install on lab . i got error when i finish on step 5 above .
could you please tell me the above step is correct or not ?
thanks .

HT1766 I have manually back up my iphone few days back, and my contact got missing the next day. i restored my back up from iTunes, however, my contact did not get restored. How do i check if the manual back up did actually back up my contact or not?

I have manually back up my iphone few days back, and my contact got missing the next day. i restored my back up from iTunes, however, my contact did not get restored. How do i check if the manual back up did actually back up my contact or not? How do i get back my old contact in my phone?

Your entire second paragraph is so confusing I am going to ignore it.
But I may be able to answer your first and third paragraphs, which seem to address the same question.
I wonder where your iPhone states it was backed up yesterday. I am going to assume that you see this under Settings > iCloud > Storage & Backup.
If that is true, then the backup from yesterday is in iCloud. The one and only way to restore an iCloud backup is to do this on your iPhone:
Settings > General > Reset > Erase All Content and Settings
That will cause your iPhone to begin a setup process. As part of that process, assuming you enter the same Apple ID you used when you created the iCloud backup, you will be offered the opportunity to restore from it.

Hi, Accidentally somebody screw up Photoshop CS4 and InDesign CS4 Master edition on a MAC computer in the school. The install discs did not start to run therefore I can't reinstall the 2 missing programs. I want to install the softwares, therefore I down

Hi, Accidentally somebody screw up Photoshop CS4 and InDesign CS4 Master edition on a MAC computer in the school. The install discs did not start to run therefore I can't reinstall the 2 missing programs. I want to install the softwares, therefore I download those from here. The downloaded program refuse to accept the serial number which was given to the school when they purchased the Master Collection CS4 MLP A00. Thank you for your help, in advance.

Hi Jeff,
Thank you. I am a little bit busy at work, sorry for the delayed reply. I tried to solve the problem, but it still exists. The 3rd of the Adobe disk is damaged someway. I tried to run on my mac at home and it has a failure. So I think we have no other choice that to download the full pack of master collection. I had a discussion with the IT expert and he figured out that company does not exist any more from where they purchased the Adobe Master Collection for Mac and PC. So If you would be kind to help me, what kind of information ID or any kind of document would be needed to identify the purchaser institute (us). I don't think any of us has an account at the Adobe. I will try to figur out. I desperately need to replace Photoshop and InDesign as without them it's really harsh to teach the kids fot the graphic design.
Sincerely yours.
Peter

Infopackage in process chain is not scheduling

Hi All
One of infopackage in process chain is not scheduling and showing error message like "<b>Attributes are not yet maintained
Entire chain now has status 'R'</b>
what do we mean about this
can anyone will let me know in detail and how to correct this?
Regards
balaji

Hi balaji,
how big is your process chain ? I got a similar problem when I build a metachain with a lot of processes in the chain (more than 60). In this case, the error message is deceiving. If your process chain has similar numbers of processes, check OSS 942804 (Jobcount handling).
Kind regards,
Jürgen

Process Chain : 0PM_INIT_P01 - Not Shown in RSPC

Dear Friends
I have installed 0PM_INIT_P01 (Initialisation:MTTR / MTBR) Process chain.
It installed successfully.
But i could not able to see in RSPC.
Can anybody tell me why it is...?
Some where i found authorization object S_RS_PC is needed for my user id. Is it so...?
Than how i can map to my user id...?
Points will be awarded for right answers
Regards
Raju Saravanan

Friends
Problem is, the installed process chain is not getting displayed in RSPC for further operations.
Before that, I have installed the Process Chain through business content (0PM_INIT_P01), and it got successfully installed. I had seen in SM37.
For testing purpose i have given the same name (0PM_INIT_P01) for another chain creation.
But system telling the name is already available.
My confusion, why it is not getting displayed in anywhere in RSPC.
Regards
Raju Saravanan

Process chain is not getting scheduled

Hi all ,
Process chain is not getting shceduled , i have saved , checked and wanted to activate but its going to a loop and its not getting activated . please suggest some solution
Regards
Akhilesh

Hi Akhilesh,
Can you check that your user has the necessary authorizations to schedule a job? Can you also check if there
is an error message generated in sm21 or dump in st22? You say as well that the scheduling is looping, in sm50 what
table/statement is the process looping over? Can you also let us know your BW release and support package level.
Best Regards,
Des

Process chain did not stop at the failure step but continue till the end

Similar Messages

Maybe you are looking for