Process chain for a full load failed

Hi,
I have a process chain where load data from an InfoCube to a DSO with the following steps:
Begin
Load data: Execute an Infopackage with full load.
Update from PSA
Activate Data: Activate data of DSO.
When I execute the process chain, the step of execute InfoPackage succes, but the step of Update from PSA failed. If I saw the errors, I can see that when the infopackage finished need to Activate the data of DSO, and the status of the request is yellow and to Update from PSA need the QM status was green. What can I do? The data transfer correctly to the DSO but not is active.
Thank you very much.
PD: May be, some steps and options are not exactly like I wrote them but I'm working in Spanish and the meaning is the same

Hi....
Look if Update from PSA has failed......then go the details tab in the IP monitor.........expand the failed data packet and see the error message........there may be several reasons .......try to solve that issue............ then delete the request from the target without making the QM status red.......the reconstruct the request................
Actually I am not getting you clearly....I think your process chain is fine......Are you trying to say your ODS activation also failed...........but how ODS activation will start..........the load itself failed.........Is the link is on success or failure....
Regards,
Debjani....
Edited by: Debjani Mukherjee on Oct 16, 2008 2:02 PM

Similar Messages

Error in process chain for PCA full load

Hello everyone,
I'm trying to use a process chain in order to delete a previous full load of plan data in a cube prior to the new load (to avoid double records). The successor job in the process chain is loading a delta of actual data into the same cube (same info source).
When executing the process chain (and the included info package (full load)), the setting "Automatic loading of similar/identical requests from info cube" in the info package is not working (I have ticked "full or init, data-/infosource are the same")...
I have checked that the function itself works as I have executed the info package manually with success. So the problem is the chain somehow.
In the chain I just execute the info package as usual... so to my understanding, it should work the same way as if I executed it manually. Or am I wrong? Is some additional setting required in the chain in order to make it work?
Any ideas?
Thanks,
Fredrik

Hi Fredrik,
not all settings in infopackages work in chains in the same way they do while running the package manually. Mostly you can check that with pressing F1 on the setting. In your case, you need to add a process type for deleting the data to the chain. In your chain maintenance, look at process types and then in load processes .... There you will find the type you need.
kind regards
Siggi

Error while creating process chain for flat file loading

Hi All,
I had Created a process Chain to load Transactiion data(Full load) form flat file which is in my computer.
start>Load>DTP>DeleteIndex>DTP loading CUBE--> Create Index
but the system is throwing an error as "An upload from the client workstation in the background is not possible."
I dont know why this error is coming?
Can some one help me
Regards
Mamta

Hi Mamta,
Basically if you want to load the DS through FF using process chain, the FF has to be placed in Application server. We cant load the FF when it is located in the client local workstation(FF On your PC).
So better you remove the Infopackage step from the PC. Load the IP manually. Once it is completed you can start the process chain with the following steps:
start>DTP>DeleteIndex>DTP loading CUBE> Create Index
Hope it is clear & helpful!
Regards,
Pavan

Process chain for full load.

Hi,
I have developed a Process chain for delta loads. Now my question is, can we use process chain to load full load data source for master data, if yeas then what are the steps.
If we can use process chain for full load to master data then can we use delta and full load infopackages in the process chain.
Please update.

Hi Sata,
You can Include both Full and Delta in the Process Chain. But make sure that you execute the Init InfoPackage manually before executing the delta InfoPackage in the Process Chain.
For Full Load Process chain, add the infopackage
>DTP for Full Load---->delete PSA data variant(after 2days) -
>attribute change run
Normally load the hierarchy first then the attribute and text.
Assign points if it helped you.
Regards,
Senoy

Delta and Full process chain for same master data target.

Hi Friends,
Can I do full update and delta update through process chain for same master data target and from same source ?
Regards
shekar reddy

Hi Sriram,
why you want to load full and delta for same master data object?
you can achieve this but make sure that you select repair full option for full load IP.
you have this option in scheduler in menu bar
Regards,
Venkatesh

Process chains for loading data to target is not functioning

Hi SAPians,
Recently, we have upgraded the firmware on IBM P590 with the help of IBM on Saturday i.e. 06/12/2008 (The firmware of P5-590 was SF235_209. It was upgraded to SF240_XXX) and since then the process chains for loading data to targets are not functioning properly. We have stopped all the SAP services, database services & OS services from our end and services have been rebooted after firmware upgrade.
However, the problem with the process chains that load transaction data and hierarchies is solved but the chains that load master data are still not working as scheduled.
We tried to load the master data manually, by running DTP to load data to an object analysis code (attributes) the request remained YELLOW. After refreshing it several times, the request turned into RED. The error message was - PROCESSING TERMINATED (screenshot 1 attached).
To mitigate this we tried deleting the bad request and it prompted with the below message:
"Cannot lock request DTPR_4C37TCZGDUDX1PXL38LVD9CLJ of table ZANLYSIS for deletion (Message no. RSMPC178)" (screenshot 2 attached)
Please advise us how the bad request should be deleted?
Regards,
Soujanya

Hi Sowjanya,
Follow the below procedure to make yellow request to RED:
Use SE37, to execute the function module RSBM_GUI_CHANGE_USTATE
From the next screen, for I_REQUID enter that request ID and execute.
From the next screen, select 'Status Erroneous' radiobutton and continue.
This Function Module, change the status of request from Green / Yellow to RED.
Once it is RED, you can manually delete that request...
Releasing LocK
Gott Transaction Code SM12 and release the lock.
Hope It helps you.
Regardss,
Nagaraju.V

0orgunit_att full load failed

The full load failed. when i analyzed the error is job terminated in source system
i checked the job overview in source system and there is a dump.
the dump is
Runtime Errors         ITAB_DUPLICATE_KEY
Date and Time          02.02.2009 08:44:59
Short text
     A row with the same key already exists.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLHRMS_BW_PA_OS" had to be terminated because it
      has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     An entry was to be entered into the table
      "\FUNCTION=HR_BW_EXTRACT_IO_ORGUNIT\DATA=MAIN_COSTCENTERS[]" (which should
have
had a unique table key (UNIQUE KEY)).
However, there already existed a line with an identical key.
The insert-operation could have ocurred as a result of an INSERT- or
MOVE command, or in conjunction with a SELECT ... INTO.
The statement "INSERT INITIAL LINE ..." cannot be used to insert several
initial lines into a table with a unique key.
to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"ITAB_DUPLICATE_KEY" " "
"SAPLHRMS_BW_PA_OS" or "LHRMS_BW_PA_OSU06"
"HR_BW_EXTRACT_IO_ORGUNIT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
please suggest <removed by moderator>.
pramod
Edited by: Siegfried Szameitat on Feb 2, 2009 11:06 AM

Hi asish,
Runtime Errors         ITAB_DUPLICATE_KEY
Date and Time          02.02.2009 06:18:44
   180                i0027_flag         = ' '
   181                ombuffer_mode      = ' '
   182            TABLES
   183                in_objects         = in_objects
   184                main_costcenters   = main_co
   185            EXCEPTIONS
   186                OTHERS             = 0.
   187
   188
>>>>>         INSERT LINES OF main_co INTO TABLE main_costcenters.
   190
   191         last_plvar = orgunits-plvar.
   192         REFRESH in_objects.
   193         MOVE-CORRESPONDING orgunits TO in_objects.
   194         APPEND in_objects.
   195       ENDIF.
   196
   197     ENDLOOP.
   198   ENDIF.
   199
   200   LOOP AT orgunits.
   201
   202     CLEAR:   infty1000, main_co, infty1008, l_t_hrobject.
   203     REFRESH: infty1000, main_co, infty1008, l_t_hrobject.
   204
   205     APPEND orgunits TO l_t_hrobject.
   206
   207     LOOP AT l_t_i1000_all INTO infty1000 WHERE objid = orgunits-objid.
   208       APPEND infty1000.
i checked this this reflects a structure. i cannont modify as this is standard table.
pramod

Help required for Creation of process chain for Open hub destination(table)

Hi Experts,
I am working on creating process chain for the open hub destination which is targeting data transfer into Table. Which is then push to SAP PI.
2.) Steps to create a process chain for OHD????? Not knowing and even after that
3.) What are the steps for Pushing it to PI (I mean we have generated client proxy also) But need to know ABAP related to trigger process chain
please need your expertise and knowledge. Well atleast with the point 2 I need BI experts help...
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]

Hi Gaurav,
Creating Process chain for OHD.
1. Go to RSPC-> Create a astart variant.
2. Click on process typesin the menu. Fourth from the left. Under this go to LOAD PROCESSES AND POST PROCESSING option.
3. The fifth option is "DATA EXPORT INTO EXTERNAL SYSTEMS". Click on that.
4. Click on F4 and choose your infospoke name.
5. Press the RIGHT button.(if it asks for variant, create a new variant in the same small window besideswritting bar).
6. Join the START process and the 2nd process via dragging.
7. Now add your required other processes.
The general process chain processes are :
1. Start.
2. Delete Indexes (if data loaded to cube).
3. Load process.
4. Delete duplicate request (if it is a full load in cube).
5. Create Indexes.
Hope it helps.
Preet

Process chains for deltas

hello I have one scenario...Can anyone explain how we can implement it?
I want to load data from R3 into Master Data Attribute in BW/BI..and it should include future delta loading also.....
and I want to use Process Chains for this....how can we do it.?(I have knowledge of loading data from R3 To MD Attribute using Process Chain but without deltas)
Thank you
Regards
NR

Hi......
Sorry for late reply.......
If we take the second implementation of PC in your abbove post.....as we included fullload in PC....before delta init.....can it be possible that fullload happens all the time as its in process chain?
yes..........since it is a part of the process chain every time when you will execute the chain.........full upload will also done..............you can do one thing you can copy the chain.......and remove that process......I mean open the chain in Planning view.....in the top where we write tcode......there write Copy...
then the chain will be copied.........remove the start process and the full upload and init upload.........then create a new start process.........look you have to create a new start process.......because you cannot use the same start variant twice..........
whats the use of attrib change run in PCs in general?
Attribute change run is used to activate the master data.......ie to convert the master data from M version to A version..........because upon activation of master data SID will generate...........which is needed to link the master data to transaction data ie dimension table.........in extended star shcema............Also Once active, the data is available in your reports........
Attribute change run also adjust aggregates........
Another thing......This process is just required for Attributes and Hierarchies, not for Text data.
Hope this helps..
Regards,
Debjani........
Edited by: Debjani Mukherjee on Nov 4, 2008 2:11 PM

Creating Process Chains for Infocube

Hi All,
I am trying to create a process chain for Vendor Evaluation(0PUR_C05).I created a start process and the "execute infopack" wich is delta load,so it prompted for "insert delete index" wich i created.Now,what to do next???
the data flow is like this..
infoapck(delta)->psa->infosource->infocube...
is giving the selete index and rebuilding it mandatory??
Please throw a light on this and help me out...
Points will be rewarded..
Regards,
Manjari.

Hi Manjari,
How to do INIT?
Go to Process Chain for Transaction Data.. and go to infopack you want to do INIT.
Right click on that variant and click "Maintain Variant".
Now if you have not yet loaded the cube using this Infopackage, you will find option Full update and Initialize data transfer in Update tab. If you have not loaded cube with any update, go to Initialize Data transfer and select the datatarget you want in Data Targets tab and check "Start immediately" in Scheduler tab and Execute.
Now go to monitor screen and refresh it in times.
Keep on monitoring in that screen until the requests become "Green".
Once the requests are Green, come back to the Cube in RSA1 and check the data in Manage screen whether the data is populated fine or not.
If the data is populated well, now go to Infopackage and in Update tab, change the Update technique to Delta. From now, you can have Delta upload using process chain.
You will come to know whether the process chain is working properly or not by executing the process chain once. In your case, run the process chain only after you are done with INIT.
If you have already loaded cube with Full load, follow the below process for INIT load...
Go to Process Chain for Transaction Data.. and go to infopack and right click it. Click on Maintain Variant.
InOrder to make it in INITIALISE DATA TRANSFERgoto... Menu>Scheduler>INITIALISATION OPTIONS FOR SOURCE SYSTEM..and click on it.
You will get a popup with some requests in it. Select the requests and make them RED and delete all the requests and enter.
And if u check in Update tab ,,for the update mode..it will be seen in INITIALISE DATA TRANSFER mode.
Then move to DATA TARGETS tab and check the data target to which you want to load data.
NOTE: If there is any data in the Cube, you want to do INIT, delete the data first (delete requests in Data target) and start INIT.
Now move to "schedule" tab in Infopackage and check if the radio button is on START DATA LOAD IMMEDIATELY and click on the START button.
Assign points if this helps u...
Regards,
KK.

Problem in creating process chains for CO

Hi Friends,
                 I have a CO cube "0OPA_C11" getting data from Three datasources,
those are 0CO_OM_OPA_6(supports delta), 0CO_OM_OPA_1(full only), 0CO_OM_OPA_2(full only), i have already created process chain to this cube using these three datasources, the chain is like this,
1. delete indexes
2.0CO_OM_OPA_6(supports delta
3.0CO_OM_OPA_1(full only),
4.0CO_OM_OPA_1(request overlapping)
5.0CO_OM_OPA_2(full only),
6.0CO_OM_OPA_2(request overlapping)
7.create indexes
        Is it right? here the chain is running, after completion of that, in manage of cube, it is showing only the request for 0CO_OM_OPA_2(full only), the request which were there earlier like Init request and new delta request for .0CO_OM_OPA_6, full request for 0CO_OM_OPA_1 are getting deleted, it is showing the request only for 0CO_OM_OPA_2,
the way how i created the process chain is right or wrong? can anybody give me the solution?
Thanx in Advance
BalajiReddy

Hi Nick,
          Thanx for your reply, everthing is ok what you've asked me to check, i think there is certain scenario to create the process chains for the data targets, which are getting data from multiple datasources, which support delta's as well as full.
          I want that scenario, can you tell me? or can anybody tell me?
The right points are assigned to the right answers.
Thanx in advance
balajireddy

Error in Process chain for CO-PC

Dear ALL
I am facing one problem.I have a process chain for CO-PC cost object controlling.In that after start process i have another process chain Manufacturing order.After this other processes are there.Upto 4th march i have the delta running fine.After that the manufacturing order PC is failing when i open the process chain i find its failing in DTP section.
Now what i did is i run the DTP for manufacturing order actually it consist of ATTRIBUTES AND TEXTS.After finishing i find in manage that the records are transferred but 0 records added and when i find the log its saying
@5C@ 0PRODORDER : Data record 1 ('000001000000 ') : Duplicate data record RSDMD 191
Thanks in Advance

Hi,
Check below these links for more business knowledge about CO-PC.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COPCIS/COPCIS.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6.
Regards,
Praveena.

Error in Process Chain for Delta pack

Hi All,
Here I am facing error in process chain for delta pack.
Error:
Last delta upload not yet completed. Cancel I
Please send me the solution asap.
Thanks

Hi,
This message means there may be a load triggered by the same infopackage that may be still running or may be still having yellow status. Go to the monitor screen from this IP itself and it will show the paricular request (it will be the latest one). See if that load is active and running. If its active try to find out if load is happening, if its happening you may let it progress. If its not active you need to force the status to red and delete from the target. Once this is done you can retrigger the load. If its a datamart load you may need to reset the data mart status before the triggering the load.
Refer
Last delta update is not yet completed
Last delta update not yet completed-PC Chain Error
Last Delta Not Yet Completed
This is the same issue as yours.
Thanks,
JituK

How to create process chain for 0EMPLOYEE

I want to create process chain for 0EMPLOYEE attribution and text, how to create it and make a schedule for daily loading? Could anyone write steps in my case? Thanks!

Hi,
Follow the following steps:
1. Go to RSPC->create->give name and disc of your chain.
Start Variant Creation
2. Now you will be prompted to give a start variant,create a new variant(click on page icon )
3.Change Selections->date/ time.
4.give date and time for start of the chain.
5.click the check box for periodic job->period values->daily->save->save
Addition of process types
6.Select the process type "Execute Infopackage"
7.select the name of the infopackage which loads attr data to 0EMPLOYEE.
8.Attribute Change run will come automatically( if not then drag it as well and create variant )
9.select the name of the infopackage which loads text data to 0EMPLOYEE.
10.Attribute change run wil again follow.
(connect the process types which are not connected,by right clicking the process types )
                             start
                       IP A     IP T
                      attr          attr
A = attribute
T = Text
Please Reward points if useful
Manish

How to Create Process Chain for Remote Cube.

Hi,
I created Remote info cube, data from ECC, loaded Successfully, I want to create Process Chain for Reomte Cube, Please Help me.
Thanks,
Nandish Gowda

Hi Nandish,
After initialization, th next delta will come as per your delta nature, if it is 0calday: Then your next delta will come tomorrow only.
If you are able to 7 records in RSA3, why not in PSA( Why it's only 5 records). Analyze this closely.
Sometimes, RSA3 exactly doesn't match with PSA because, RSA3 works on update mode F.
Regards,
Suman

Process chain for a full load failed

Similar Messages

Maybe you are looking for