Process chain (RSPC) modifcation in Quality and production system

Hi,
In our landscape quality and production system is set as non modifiable. But we want to modify the process chain (RSPC) in Quality and production system.
As per the thread Need input: do process chain/InfoPackages changeable on PROD in your compa? in RSA1 -> Transport connection we made RSPC ( Process Chain) , RSPT (process chain starter) and RSPV (process variants) are changeable.
With this setting we are able to create/ edit new process chain in Quality and Production system. But we canu2019t edit the transported Process chain. i.e. process chain transported from Dev to Quality system.
We donu2019t want to open Business Information Warehouse: Customer Namespace (/BIC/ ) in Quality and production system (Se06). Please let me know is there any other settings needs to be.
We are on BI 7.0
Regards
Preethish

Hi ,
In RSA1 -> Transport Connection --> Object Changeability
Object has 3 state
Not Changable
Changable Original
Every thing changable
What is the difference b/w Changable Original and Every thing changable
Thanks..
Preethish

Similar Messages

Program to Auto Import transports to quality and production systems

Hi Experts
Do anyone have a program that imports transport requests automatically into quality and production systems from development? I know there is a procedure to import all into QA that can be set in TMS.
But I am looking for a program instead that could auto import into quality and subsequently to production.
Thanks,
Ravali

You need to set the autoimport job in Q whichh will bring all the transport from Dev when they are released. For autoimport go to STMS --> import queue of your Q system -->Start import with the small truck sign and it will ask you to select the time (run it every 15 mins or so) --> start the job
Production you never setup an autoimport, there might be some transports which you may not want to send to prod, only the approved transport will go to prod. Hope this helps

Difference in the performance of Quality and Production system

Hi All,
We have a scenario wherein we refreshed the production system data into quality system 1 month ago.
Few days back we noticed that when we are trying to fetch data from COMM_PRODUCT database table (in CRM Production system) based on the product description.....it was taking 2-3 mins.
However, when we try the same in quality system, it takes only 10 secs. Any idea as to how there is such a difference when both the production and quality contain nearly same data (was refreshed only one month ago).
Any thoughts on this?

You should really search the forum before asking. Exactly the same question was asked and answered here two weeks ago: Performance of the program is very good in Quality but Very poor in Prod.
Rob

How to transport Web Dynpro for Java to Quality and Production

Hi experts,
I am about to start my first Web Dynpro application, local on my PC. How can I make it available than in quality and production system?
Thank you very much.
Best regards,
Danijela

Hi,
If ur quality and production system can be used through the DTR only.
If u have authrization then u can directly chek in the files or application.
Otherwise u can send the Zipfile(Application)to be sent to ur coordinator then he will check in the Application into DTR.
For the Quality and productionsytem can be used Ear file from the DTR.
Thanks
Lohi.

HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING IN THE PRODUCTION?

HI ALL,
CAN ANYONE TELL ME HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING DAILY AT 5.00 PM. I NEED TO STOP THE PROCESS CHAIN FOR COUPLE OF DAYS AND THEN RESTART IT AGAIN.
cAN ANYONE TELL ME THE PROCEDURE TO STOP THE ENTIRE PROCESS CHAIN RUNNING IN THE PRODUCTION.
THANKS
HARITHA

Hi,
First and foremost let me advice you to be very careful while doing this.
For Rescheduling
RSPC> chain > Goto > Planning view and
click on Execution tab > select > Remove from Schedule and then in Maintain variant of start process reschedule for the day you require it to run.
For terminating active chain
You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
The next step will be to go to targets that you were loading and remove the red requests from those targets.
Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
Re: Kill a Job
Re: Killing a process chain.
Regards,
JituK

What are the Phases in Development ,Quality and Production

Development-----> CREATING PROCESS CHAIN,IF, DSO , QUERY IN BEX WHAT ELSE IN QUALITY AND PRODUCTION AND IMPLEMENTATION.

Hi Suri,
SCN won't teach any modules here.
If your under training please ask your trainer or refer your training notes.
Even on Google you can search and help yourself.
in future also please never ask basic questions here.Soon your thread will be hidden.
if your new to scn please read scxn rules.
The SCN Rules of Engagement
Getting Started with SCN
Thanks

Process of moving TR from Quality to Production

Dear Experts,
we are in a process of moving TR from Quality to Production. While moving we faced transport incositencies like some old requests have been overwritten into the new one and dependant objects were failed during import in PRD. Now production rehearsal client is kind of messed up. what is the right procedure to transport the requests from Quality to Production. (actually we transferred the TR individually based on the list send by the respectivr module owners). Please help me to findout the solution for this issue.
regards,
Yasin.

Hi,
This situation comes every now & then when you don't have any client strategy define in your landscape I'm not blaming you but for your Project Manager and then rest of the team adopt SAP standard practice if you really want things to go well act NOW..!! here is the basic to start:
Ex,
DEV ::
100 => Golden Client
200 => Customizing Client
300 => Test Client
Things to check before importing request in QAS :
1) Always get the request in sequence format ask the owner of the request for the sequence to avoid dependency issues
2) Technical Specification doc - this doc will be prepare by Functional / Developer on what changes are included in TR
QAS::
400 => Quality Client
Things to check before importing request in PRD :
1) User acceptance doc i.e UAT - client / customer will check the functionality if it's on then move this to PRD
2) Get the request in sequence format
3) Approval for production transport
PRD::
500 => Production Client
Thanks,
Saleem

Process chain executed synchronously produces dump and hangs

Process chain (RSPC) being executed synchronously hangs on a step (not first) with yellow status. Analysis of ST22 shows there is dump: RAISE_EXCEPTION
The chain loads data from flat files on frontend to several characteristics (attributes and texts). All the steps are sequential.
After the start first file is loaded successfully (info package), subsequent data transfer process has no errors too. But the second info package becomes yellow and hangs just after ( after some time timeout occurs and the step becomes red). In ST22 i see dump, text of the dump is below. Analysis of the dump reveals that 'GUI_UPLOAD' FM doesn't work during execution of the second info-package.
The chain looks as follows:
1. Info package 1
      V
2. Data transfer process 1
      V
3. Info package 2              <-------   hangs here because of dump
      V
4. Data transfer process 2
     V
Hangs on step 3 (infopackage 2).
Text of the dump:
Runtime Errors         RAISE_EXCEPTION
Date and Time          10.10.2010 19:07:59
|Short text                                                                                |
|    Exception condition "NOT_SUPPORTED_BY_GUI" raised.                                            |
|What happened?                                                                                |
|    The current ABAP/4 program encountered an unexpected                                          |
|    situation.                                                                                |
|Error analysis                                                                                |
|    A RAISE statement in the program "CL_GUI_FRONTEND_SERVICES======CP" raised the                |
|     exception                                                                                |
|    condition "NOT_SUPPORTED_BY_GUI".                                                             |
|    Since the exception was not intercepted by a superior                                         |
|    program, processing was terminated.                                                           |
|                                                                                |
|    Short description of exception condition:                                                     |
|                                                                                |
|                                                                                |
|    For detailed documentation of the exception condition, use                                    |
|    Transaction SE37 (Function Library). You can take the called                                  |
|    function module from the display of active calls.                                             |
|    -                                                                                |
|How to correct the error                                                                          |
|                                                                                |
|    If the error occures in a non-modified SAP program, you may be able to                        |
|    find an interim solution in an SAP Note.                                                      |
|    If you have access to SAP Notes, carry out a search with the following                        |
|    keywords:                                                                                |
|                                                                                |
|    "RAISE_EXCEPTION" " "                                                                         |
|    "CL_GUI_FRONTEND_SERVICES======CP" or "CL_GUI_FRONTEND_SERVICES======CM00X"                   |
|    "FILE_EXIST"                                                                                |
|                                                                                |
|    or                                                                                |
|                                                                                |
|    "CL_GUI_FRONTEND_SERVICES======CP" "NOT_SUPPORTED_BY_GUI"                                     |
|                                                                                |
|    or                                                                                |
|                                                                                |
|    "RSBATCH1 " "NOT_SUPPORTED_BY_GUI"                                                            |
|    If you cannot solve the problem yourself and want to send an error                            |
|    notification to SAP, include the following information:                                       |
|                                                                                |
|System environment                                                                                |
|    SAP-Release 701                                                                               |
|                                                                                |
|                                                                                |
|    SAP kernel....... 701                                                                         |
|                                                                                |
|    Patch level. 69                                                                               |
|    Patch text.. " "                                                                              |
|                                                                                |
|User and Transaction                                                                              |
                                                                                |
|    Program............. "CL_GUI_FRONTEND_SERVICES======CP"                                       |
|    Screen.............. "SAPMSSY0 1000"                                                          |
|    Screen Line......... 6                                                                        |
|                                                                                |
|Information on where terminated                                                                   |
|    Termination occurred in the ABAP program "CL_GUI_FRONTEND_SERVICES======CP" -                 |
|     in "FILE_EXIST".                                                                             |
|    The main program was "RSBATCH1 ".                                                             |
|                                                                                |
|    In the source code you have the termination point in line 8                                   |
|    of the (Include) program "CL_GUI_FRONTEND_SERVICES======CM00X".                               |
|Source Code Extract                                                                               |
|Line |SourceCde                                                                                |
|    1|method FILE_EXIST.                                                                          |
|    2|* ...                                                                                |
|    3|                                                                                |
|    4| CLASS CL_GUI_CONTROL DEFINITION LOAD .                                                    |
|    5|                                                                                |
|    6|*-check if valid GUI is available----
                         |
|    7| IF IS_VALID_HANDLE( ) NE 0 AND cl_gui_control=>www_active IS INITIAL.                     |
|>>>>>|    RAISE NOT_SUPPORTED_BY_GUI.                                                             |
|    9| ENDIF.                                                                                |
|   10|                                                                                |
|   11|* check parameter, wild characters not allowed                                              |
|   12| IF FILE IS INITIAL OR FILE CA '*<>|"'.                                                    |
|   13| MESSAGE 'WRONG PARAMETER: FILE_NAME' TYPE 'I' RAISING WRONG_PARAMETER.                    |
|   14|    EXIT.                                                                                |
|   15| ENDIF.                                                                                |
|   16|                                                                                |
|   17|* special handling for SAPGUI for HTML                                                      |
|   18| IF CL_GUI_CONTROL=>WWW_ACTIVE IS NOT INITIAL.                                             |
|   19|                                                                                |
|   20|    DATA: rc type i, filename(4096) type C.                                                 |
|   21|    filename = file.                                                                        |
|   22|    CALL FUNCTION 'ITS_QUERY'                                                               |
|   23|      EXPORTING                                                                             |
|   24|        filename = FILEname                                                                 |
|   25|        query    = 'FE'                                                                     |
|   26|      IMPORTING                                                                             |
|   27|        return   = rc.                                                                      |
|Active Calls/Events                                                                               |
|No.   Ty.          Program                             Include                             Line   |
|      Name                                                                                |
|    8 METHOD       CL_GUI_FRONTEND_SERVICES======CP    CL_GUI_FRONTEND_SERVICES======CM00X     8 |
|      CL_GUI_FRONTEND_SERVICES=>FILE_EXIST                                                        |
|    7 FUNCTION     SAPLSFES                            LSFESU16                               96 |
|      GUI_UPLOAD                                                                                |
|    6 METHOD       CL_GUI_FRONTEND_SERVICES======CP    CL_GUI_FRONTEND_SERVICES======CM013     4 |
|      CL_GUI_FRONTEND_SERVICES=>GUI_UPLOAD                                                        |
|    5 METHOD       CL_RSDS_ACCESS_GUI_UPLOAD=====CP    CL_RSDS_ACCESS_GUI_UPLOAD=====CM001    74 |
|      CL_RSDS_ACCESS_GUI_UPLOAD=>IF_RSDS_EXTRACT_DIRECT~EXTRACT                                   |
|    4 FUNCTION     SAPLRSDS_BACKEND                    LRSDS_BACKENDU01                      304 |
|      RSDS_DATA_PULL                                                                              |
|    3 FUNCTION     SAPLRSSM                            LRSSMU17                             5422 |
|      RSSM_CALL_RSAR_DATA_REQUEST_1                                                               |
|    2 FORM         RSBATCH1                            RSBATCH1                             1327 |
|      START                                                                                |
|    1 EVENT        RSBATCH1                            RSBATCH1                              498 |
|      START-OF-SELECTION                                                                          |

If i load the step manually it works. The hung step is possible to re-execute after it gets red (with context menu) and it works then. After that it hangs on the 3rd info-package and so on.
The file lays on a network drive, but i suspect it doesn't matter

Bestway to find difference between two roles in quality and production

We have a process of collecting su53 dump and then analyze for missing authorization . However some time although everything works fine in quality , it fails in production . Hence I want to know a simple methodology to compare roles in quality and production to know difference ... Can anyone share best methodolgy being used in your setup ?
NPB

(1)How to find the difference between two dates at Universe level and at report Level in IDT?
DaysBetween ([Sale Date];[Invoice Date]) returns 2 if [Sale Date] is 15 December 2001 and [Invoice Date] is 17 December 2001.
(2) How to change format of dates from YYYY/MM/DD to DD/MM/YYYY in IDT at prompt level ?
=FormatDate(ToDate(YOUR DARE OBJECT);"YYYY/MM/DD");"dd'/'MM'/'yyyy")
=To_Char (object name, required format)
Find the below link for more info.
http://scn.sap.com/community/semantic-layer/blog/2014/04/18/bi41-business-layer-enhancements--create-display-format
(3)What is VIEWS in IDT of data foundation layer when we right click? could u plz give one example where exactly we use VIEWS?
A custom data foundation view is a subset of the data foundation Master view. You can use views when editing a large data foundation, and interested in working with a subset of tables. You can define multiple custom views for the data foundation due to the complexity of the data warehouse.
Essentially, need created views for each individual star scheme (like Sales, Production, Finance, Accounting, etc.) plus a view for eachcomplex dimension structure (like Business Partner, Material, Customer, Plant etc.),
Find the below link for more info.
http://scn.sap.com/docs/DOC-54422
(4) How to represent & report my IDT data in dashboards? could u plz explain the steps?
Please find the below link: http://scn.sap.com/docs/DOC-27559

How to run process chain in day of 20 and 2 every month?

Dear all,
I have to run process chain in day of 20 and 2 every month,but the settting of PC just allow Scheduled start every month once
time.
Please tell me the way of setting process chain.
Thanks.

Hi,
(1) Create an event in the BW system
Define a system event (for example SAP_BW_TRIGGER) with Transaction SM62. Lets says it is "EVENTX". Use this even in the Process chain and execute the process chain as repeative job.
(2) Use the below lines of code in the program for calling a Fucntion which trigeres the event created above . Here in this program you will call the the Below FM if and only id the sy-datum is 20 th or 2nd of the month ( as mentioned by our friend suggested).
call function 'BP_EVENT_RAISE'
exporting
eventid = EVENTX
exceptions
bad_eventid = 1
eventid_does_not_exist = 2
eventid_missing = 3
raise_failed = 4
others = 5.
endfunction.
Regards,
Anil Kumar Sharma .P

How to Transport changes from Dev. to Quality and production

Hello Friends,
I've done the below changes in IR
1.Added idoc in Imported Idocs
2.Added new Interface Mapping
3.Added new Message Mapping
In ID:
Chagned Receiver Agreement
Changed Interface Agreement
Please let me know how i can move the changes to Quality and Production..
Pls. provide me the steps to create Transport and how to transfer.
Thanks in advance!!!
Best Regards
Prasad

Hi,
By using File system or cms you can transport, better to do the configuration steps manually to avoid ther errors.
We can do some changes to move
Moving Dev to QA changes
1.SLD: are there any changes we need to do.
If you have common SLD, then I doubt if you may need any changes on SLD side.
The Business systems you had used will be the same you may use in Q-Landscape.
2.IR: are there any changes we need to do.
---> No changes required, you need to export .tpz file from Development box and have to import it in Q-box
3.ID: do we need to recreate it fully or after importing,just change the Communication channels will
do.I am confused here.
You need to reconfigure all communication channels, if SLD changes are OK then business system will
change automatically and in communication channel just filled in correct IP/password etc.
---> Similar to IR, you can transport these objects also. But you may need to do related changes to communication channels, if you will be referring to different Sender systems and Receiver systems.
Then as mentioned in previous posts you may need to maintain those Business systems in SLD also.
4.RWB: such as alerts,and if there are any...
--> The Alerts will not be transported....you need to create it as new setup for every box.
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/09/88f339db9911d2b41a00609419f767/content.htm

Deploying BO universes and webi reports in quality and production

Hi
We are on BO XIR2 SP5 and reporting on SAP BI Infocubes and Queries.
We have 3 environments setup,each for development,quality and production.
During universe development,while creating a new connection we provide the IP address of application server,username ,password,system id,client number etc details.
The above details would defer for 3 different environments.In our case we have built around 50 universes.
So what would be the smart way of deploying these universes in each of the other 2 environments?Because changing universe connection details would mean re creating the universe classes and objects which would be a huge effort.Would the webi reports continue to work upon re creating the universe with new connection details?
Please suggest a best and smart practice for the above scenario.

Hi,
Using Import Wizard tool in BO you can migrate Universe and Reports from dev env to test.
Using the Import Wizard tool you can migrate the reports.
Steps are as follows:
Open Import window:
In Source environment , enter the details of dev environment.
Destination wizard you have to enter Test env credentials.
Then you have to select all the universe and the wid files from this wizard (The files you want to transfer ).
Finally finish this wizard by pressing finish button.........
Hope this will help you
Regards
Sindhu

Reg:process chains could be started manually and automatically

Hi
Each process chain could be started manually and automatically
>If i want to start the process chain manually, how should i start and what are the settings shall i mark
>If i want to start the process chain automatically, is there any tool are there to start the process chain at that particular time
Plz clarify my doughts it is use full too me
Thanks & Regards
manikanta

Hello,
PC can be started both manually and automatically.
Every PC has a start variant, when you right click on the start variant and go in the edit option, select the option direct scheduling. Then in change selection, check the box immediate and keep the periodic job at the bottom unchecked.
Hit the tick, save on the other screen. And when back on the PC screen, from the menu option select the schedule option.
This will run the chain manually.
To run it automatically, follow the same procedure but instead of using immediate choose, data and time, provide date and time when you want to run, you can check periodic option if you want the chain to run daily, weekly or monthly.
Regards,
Shashank

Browser IE7.0 does not support WebDynpro in Quality and production only

Hi All,
Our portal version is NW04 SP15 adn NWDI is on NW700.We have Development ,Quality and production portal.We are using browser IE6.0 to see the WebDynpro application as we are unable to see the webdynpro application on browser IE7.0.We are gettimg message "Browser does not support WebDynpro".
However few days ago suddenly we are able to see webdynpro application on browser IE7.0 in the Development portal only.When we open the quality and production url on the browser IE7.0 we are getting error message "Browser does not support webdynpro".
Our Basis team askes us to analyze when we open the development url on IE7.0 we are able to see webDynpro application where as when we open the quality and prosuction url on browser IE 7.0 we are getting message "Browser does not support webdynpro"
Can anybody tell why does IE7 work in development (PWD), but not in other EP6 instances quality(PWQ), production (PWP)?
Thanks
Susmita

Hi
Thanks for all your response.
I have alredy gone through the forums why IE 7.0 doesnot support WebDynpro.What to do to make IE7.0 work for webDynpro(SAP note 991449).
I have already told basis team regarding the behaviour of IE7.0.However basis team is sticking to their question what has done in the development so that IE7.0 is working for WebDynpro in Development.
I will ask the patch level from basis team for Development,Quality,production.May be patch is different thats why Dev is working in IE7.0 and not in quality and production.
I am sure the issue not related to code or iView property and related to IE property.Is anything done on the Development instance PWD at Server so that we are able to see webdynpro on IE7.0 for development?
What i need to check in the url https://websmp106.sap-ag.de/pam as i am new to this url.
Thanks
Susmita

Load to psa is in yellow status only in quality n production system

Hi All,
We have created a generic FM which wil take date parameter as input and fetch records for that specific month. This FM works perfectly fine in dev server, but when i run the same in quality and production the load status is still in yellow status.
FYI, data records are fetched/extracted correctly and data package individually is in green status. But under extraction flow i see the following message " Missing message: Selection completed " at this stage the status is in yellow.
If i check the job in r/3 system then the last job log entry is
" Asynchronous transmission of info IDoc 3 in task 0003 (1 parallel tasks) "
Kindly suggest what can be done here to resolve this. We have stuck for quite long on this.
Thanks & Regards,
Anup

hi
debug the FM program , if you wont find any then try this.
you may missing messages in extraction process
try this
trun load to red and re-start and check the source system extraction process also check in the source system envio t Rfc-- in the source system ( to know the status)
Missing message: Selection completed
Error: 'Missing message: Selection completed' - URGENT
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=153780896
Data Loads into BI system
check this may help you.
Edited by: Srikanth.T on Dec 22, 2011 9:47 AM

Process chain (RSPC) modifcation in Quality and production system

Similar Messages

Maybe you are looking for