Process data in server

I also have the following problem:
I want to create a Server application that receives binary data streams from a client and then divides them into 6 * 8 bits, i.e. the string 010101010101010101010101010101010101010101010101010101... should be devided into ([01010101] [01010101][01010101] [01010101] [01010101][01010101] ) ([01010101]...
How can I do this? Any good webpages?

Use input stream and read 6 bytes ate a time and put it in a appropriate data structure read the API for more specific information.
http://java.sun.com/j2se/1.5.0/docs/api/java/io/InputStream.html#read(byte[])

Similar Messages

SAP MII 14.0 SP5 Patch 11 - Error has occurred while processing data stream Dynamic Query role is not assigned to the Data Server

Hello All,
We are using a two tier architecture.
Our Corp server calls the refinery server.
Our CORP MII server uses user id abc_user to connect to the refinery data server.
The user id abc_user has the SAP_xMII_Dynamic_Query role.
The data server also has the checkbox for allow dynamic query enabled.
But we are still getting the following error
Error has occurred while processing data stream
Dynamic Query role is not assigned to the Data Server; Use query template
Once we add the SAP_xMII_Dynamic_Query role to the data server everything works fine. Is this feature by design ?
Thanks,
Kiran

Thanks Anushree !!
I thought that just adding the role to the user and enabling the dynamic query checkbox on the data server should work.
But we even needed to add the role to the data server.
Thanks,
Kiran

This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server.

I have a client with a BlackBerry Pearl 8110. It was (is) configured to receive email from a Microsoft Exchange Server via his Outlook account. I have uninstalled the Desktop Manager and re-installed ensuring the computer transmits his email via the Re-Director. All settings in the Desktop Manager are correct. The phone was working fine for over 5 years. Now he is getting emails both on his phone and in Outlook saying:
This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server.
I have verified that his phone is not attempting to perform the Enterprise Activation process by checking :
Options > Advanced Options > Enterprise Activation.
He does however have a Service Book entitled "CMIME"
How can I resolve this issue?

Is the user needing the Redirector service?
Step 1: If you're not using Redirector or Enterprise, you should uninstall Desktop Manager and then reinstall it using the BlackBerry Internet Service option.
Step 2: On your device, go to: Options > Advanced > Service Book, and delete all service books for [Desktop]
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

The server was overloaded. Impossible to process data.

Hi,
We are running into a condition 503 Service Unavailable when a user logs in via SAML2. To replicate the scenario I log into the SAML idp which tkes me to the portal. I click logoff which then puts me back onto the idp login page. I login again and then get a 503 error. This started happening after activating SAML2 in the portal. The Portal is running on NetWeaver 7.31 sp11.
In the default trace I see the following.
#2.0 #2014 11 11 16:10:49:241#0-500#Error#com.sap.engine.services.servlets_jsp.Security#
com.sap.ASJ.web.000657#BC-JAS-WEB#servlet_jsp#C0008E96B61600AF0000000000008E2C#643695450000000004#sap.com/irj#com.sap.engine.services.servlets_jsp.Security#J2EE_GST_SWP#0##2B438FBD69E711E497D10000265E035A#ec29bc3669e611e494890000265e035a#ec29bc3669e611e494890000265e035a#0#Thread[HTTP Worker [@614087135],5,Dedicated_Application_Thread]#Plain##
Service not available. Details: The server was overloaded. Impossible to process data.#

Hello,
We are facing same issue - we are on Ep NW 7.30 SPS 12.
I could find below SAP Notes which were recently released
2132887 - SAML2 log out from the portal fails. Error "Server is overloaded. It is impossible to process data" might also occur
2133307 - Improve the DoNotLogoutResources Option in SAML 2.0
Note says tp edit parameter DoNotLogoutResources by adding URL - /irj/servlet/prt/portal/prtroot/com.sap.portal.dsm.Terminator in SAP NetWeaver Administrator under Configuration -> Authentication and Single Sign-On -> Authentication -> Components, in the SAML2LoginModule.
Is that we need to Edit the Login Module Options and add this?
Did any one give a try? Please suggest
Thanks,
Subbu

Unable to connect to Data Warehouse Server

I have a Data Warehouse Server that appears to be functioning but is running System Center Service Manager 2010 (w/ out SP1), Also have a functioning Configuration Management Server with Reporting Services Point installed the is running System Center
2012. Both systems are VM's running Windows Server 2008 R2 Enterprise w/ SP1 fully patched. Both systems are running SQL Server 2008 R2 as well. When I try to register the Data Warehouse Server via the GUI using the console or in Powershell it errors
out. Particularly on the GUI with the error "Unable to connect to data warehouse management server". I can browse to it, ping it, get the configuration management reports to run and show my AD assets, etc... but it will not register the DWS. I have
tried every suggestion TechNet has to offer and I am hitting a wall. Can someone please, please, please help!?!

These are the types of errors I am getting in the Event Logs:
Log Name:      Operations Manager
Source:        Console Operations
Date:          4/22/2014 11:18:53 AM
Event ID:      33569
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      IS-V004.CH.ElSegundo.org
Description:
Cannot connect to SQL Reporting Services Server. Message= Cannot display reporting wunderbar because the information is not yet available in DW CMDB. Remediation = Please wait for MP sync process to finish and try again later.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Console Operations" />
    <EventID Qualifiers="49152">33569</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-22T18:18:53.000000000Z" />
    <EventRecordID>71</EventRecordID>
    <Channel>Operations Manager</Channel>
    <Computer>IS-V004.CH.ElSegundo.org</Computer>
    <Security />
</System>
<EventData>
    <Data>Cannot display reporting wunderbar because the information is not yet available in DW CMDB.</Data>
    <Data>Please wait for MP sync process to finish and try again later.</Data>
</EventData>
</Event>
Log Name:      Operations Manager
Source:        Console Operations
Date:          4/22/2014 11:18:42 AM
Event ID:      33569
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      IS-V004.CH.ElSegundo.org
Description:
Cannot connect to SQL Reporting Services Server. Message= An unexpected error occured while connecting to SQL Reporting Services server: System.NullReferenceException: Object reference not set to an instance of an object.
   at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupServerSession.TryConnectToReportingManagementGroup() Remediation = Please contact your Administrator.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Console Operations" />
    <EventID Qualifiers="49152">33569</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-22T18:18:42.000000000Z" />
    <EventRecordID>68</EventRecordID>
    <Channel>Operations Manager</Channel>
    <Computer>IS-V004.CH.ElSegundo.org</Computer>
    <Security />
</System>
<EventData>
    <Data>An unexpected error occured while connecting to SQL Reporting Services server: System.NullReferenceException: Object reference not set to an instance of an object.
   at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupServerSession.TryConnectToReportingManagementGroup()</Data>
    <Data>Please contact your Administrator.</Data>
</EventData>
</Event>

Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.

Hi!
We have 5 Exchange 2013 servers and when I’m trying to run a script that includes the cmd-let Get-MessageTrackinglog with StartDate = the first of the month and with EndDate = the end of the month I get the following error message after
a couple of hours. The script is run on the server SERVER01 and goes through the Message Tracking logs of all Exchange servers. I have tried the script on other servers and get the same result.
Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.
[Server=SERVER01, TimeStamp = 918/2014 19:32:34]
For more information, see the about_Remote_Troubleshooting Help topic.
    + CategoryInfo
: OperationStopped: (server01.domain.com:String) [], PSRemotingTransportException
    + FullyQualifiedErrorId : JobFailure
    + PSComputerName
: server01.domain.com
I have gone through “about_Remote_Troubleshooting Help topic”, but can’t find anything related to my issue. There is nothing in the Application or the Windows PowerShell log either.
/Henrik

Hi Henado
Check the time on your Exchange server(s) relative to the DCs and ensure they are in correct sync
Use another account which is assigned the Organization Management permission and log to to the server run the command in shell and see the results
Run
Add-PSSnapin -Name Microsoft.Exchange.Management.PowerShell.E2010
Set-Adserversettings -ViewEntireForest $True and then run message tracking command and see the results
If none of the above helps you may need to remove and re-install the WinRM and see the results
Good Luck :)
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Problem with data socket server

We have developed a program (from LabVIEW 6.1 running on Windows NT) consisting of a main executable and four other executables dedicated to collecting various i/o information. The four i/o executables convert raw data into process data and pass it on to the main executable using Data Sockets. The data is assembled as a cluster, then flattened into a string, which is published to a data socket variable. The data cluster contains a time stamp used by the main executable to verify i/o is being updated periodically (at least once a second). The main executable generates an alarm if the timestamp gets to be more than 5 to 15 seconds old, depending on the expected data. Typically, this alarm never happens, unless an i/o device is powered down o
r disconnected, or an executable or Data Socket Server is terminated.
The problem we are is experiencing is that false alarms are being generated, at precise intervals of exactly 5 days, 18 hours, 1 minute, and 1 second. The alarm condition occurs then clears immediately. The only thing I can think of is the data socket is somehow "cleared" for some reason at this interval, causing the main executable to momentarily read a time stamp of zero, and generate an alarm. Is there anything that might be corrupting the data sockets at a long interval like this? The worst thing is that the alarm horn gets falsely triggered, so we are trying to resolve this but can not see anything in any of the code to cause such an occurrence.
Thanks in advance for your help.
Brian Hajder
Despatch Industries
8860 207th Street West
Lakeville, MN 55044
Phone: 952.469.8111
Fax: 952.469.4513
[email protected]

Hello Matt,
Thank you for reading & responding. I should try to summarize this specific application in a little more detail.
We have built a manufacturing tool for a customer that is controlled by a single Windows NT PC, for which we have developed 5 executables using LabView 6.1. The main executable provides the user interface. The other four executables are dedicated to control & monitoring of specific i/o devices (serial or IEEE-488). The i/o executables pass data to and receive commands from the main using data sockets. The PC is not on any type of network. The main executable supports an optional SEMI standard host link through its ethernet port, but that is not currently active or connected. A total of 13 data sockets are used, to implement si
mple "one way" traffic through any socket, making buffering unnecessary. Some data sockets (i/o data to and from main) are updated a few times a second at most, commands from the main may only be updated a few times a day.
Data from each of the i/o executables includes a time stamp indicating the last valid i/o hardware read time. The main uses this data from each i/o executable to determine whether i/o hardware is responding properly - if the timestamp gets to be anywhere from 5 to 15 seconds old (depending on which i/o is being checked), an i/o failure alarm for that device is raised.
What seems to be happening is that, periodically, precisely every 496,861 seconds, two or more of the timestamps are found to be too old; I am assuming some external event is momentarily clearing socket data & the zero value timestamps look very old, thus triggering alarms at the exact same second. The alarm conditions clear up in less than one second.
I wonder what you mean by "the datasocket
server resetting"? Is this documented anywhere?
Thanks for plowing through this wordy description, I appreciate any help you can suggest.
Brian

Essbase Analytics Link cannot create data synchronization server database

When I try to create data synchronization server database using Essbase Analytics Link, the below error occur, anyone can help?Thnaks
dss.log:
19 Oct 2011 17:28:55] [dbmgr] ERROR: last message repeated 2 more times
[19 Oct 2011 17:28:55] [dbmgr] removed "C:\oracle\product\EssbaseAnalyticsLink\oem\hfm\Comma\Default\Comma.hdf"
[19 Oct 2011 17:28:55] [dbmgr] removed "C:\oracle\product\EssbaseAnalyticsLink\oem\hfm\Comma\Default\PERIOD.hrd"
[19 Oct 2011 17:28:55] [dbmgr] removed "C:\oracle\product\EssbaseAnalyticsLink\oem\hfm\Comma\Default\VIEW.hrd"
[19 Oct 2011 17:28:55] [dbmgr] removed "C:\oracle\product\EssbaseAnalyticsLink\oem\hfm\Comma\Default\YEAR.hrd"
[19 Oct 2011 17:28:58] [dbmgr] Create metadata: "C:/oracle/product/EssbaseAnalyticsLink/oem/hfm/Comma/Default/Comma.hdf"
[19 Oct 2011 17:28:59] [dbmgr] WARN : HR#03826: Directory "C:\oracle\product\EssbaseAnalyticsLink/Work/XOD/backUp_2" not found. Trying to create
[19 Oct 2011 17:29:15] [dbmgr] ERROR: ODBC: HR#01465: error in calling SQLDriverConnect ([Microsoft][ODBC SQL Server Driver][Shared Memory]Invalid connection. [state=08001 code=14]).
[19 Oct 2011 17:29:15] [dbmgr] ERROR: HR#00364: Cannot open source reader for "ACCOUNT"
[19 Oct 2011 17:29:15] [dbmgr] ERROR: HR#00627: Cannot create dimension: "ACCOUNT".
[19 Oct 2011 17:29:16] [dbmgr] ERROR: HR#07722: Cube 'main_cube' of application 'Comma' is not registered.
eal.log:
[2011-Oct-19 17:28:56] http://localhost/livelink/Default.aspx?command=readYear&server=TestEss64&application=Comma&domain=
[2011-Oct-19 17:28:56] http://localhost/livelink/Default.aspx?command=readPeriod&server=TestEss64&application=Comma&domain=
[2011-Oct-19 17:28:57] http://localhost/livelink/Default.aspx?command=readView&server=TestEss64&application=Comma&domain=
[2011-Oct-19 17:28:57] http://localhost/livelink/Default.aspx?command=getVersion&server=TestEss64&application=Comma&domain=
[2011-Oct-19 17:28:58] DSS Application created
[2011-Oct-19 17:28:58] http://localhost/livelink/Default.aspx?command=getICPWeight&server=TestEss64&application=Comma&domain=
[2011-Oct-19 17:29:15] (-6981) HR#07772: cannot register HDF
[2011-Oct-19 17:29:15] com.hyperroll.jhrapi.JhrapiException: (-6981) HR#07772: cannot register HDF
[2011-Oct-19 17:29:15]      at com.hyperroll.jhrapi.JhrapiImpl.updateMetadata(Native Method)
[2011-Oct-19 17:29:15]      at com.hyperroll.jhrapi.Application.updateMetadata(Unknown Source)
[2011-Oct-19 17:29:15]      at com.hyperroll.hfm2ess.bridge.HyperRollProcess.updateMetadata(Unknown Source)
[2011-Oct-19 17:29:15]      at com.hyperroll.hfm2ess.bridge.ws.BridgeOperationManagerImpl.createAggServerApp(Unknown Source)
[2011-Oct-19 17:29:15]      at com.hyperroll.hfm2ess.bridge.ws.BridgeOperationManager.createAggServerApp(Unknown Source)
[2011-Oct-19 17:29:15]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[2011-Oct-19 17:29:15]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[2011-Oct-19 17:29:15]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[2011-Oct-19 17:29:15]      at java.lang.reflect.Method.invoke(Method.java:597)
[2011-Oct-19 17:29:15]      at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:92)
[2011-Oct-19 17:29:15]      at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:74)
[2011-Oct-19 17:29:15]      at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:151)
[2011-Oct-19 17:29:15]      at com.sun.xml.ws.server.sei.EndpointMethodHandlerImpl.invoke(EndpointMethodHandlerImpl.java:268)
[2011-Oct-19 17:29:15]      at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:100)
[2011-Oct-19 17:29:15]      at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:866)
[2011-Oct-19 17:29:15]      at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:815)
[2011-Oct-19 17:29:15]      at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:778)
[2011-Oct-19 17:29:15]      at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:680)
[2011-Oct-19 17:29:15]      at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:403)
[2011-Oct-19 17:29:15]      at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:532)
[2011-Oct-19 17:29:15]      at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:253)
[2011-Oct-19 17:29:15]      at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:140)
[2011-Oct-19 17:29:15]      at weblogic.wsee.jaxws.WLSServletAdapter.handle(WLSServletAdapter.java:171)
[2011-Oct-19 17:29:15]      at weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke.run(HttpServletAdapter.java:708)
[2011-Oct-19 17:29:15]      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
[2011-Oct-19 17:29:15]      at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
[2011-Oct-19 17:29:15]      at weblogic.wsee.util.ServerSecurityHelper.authenticatedInvoke(ServerSecurityHelper.java:103)
[2011-Oct-19 17:29:15]      at weblogic.wsee.jaxws.HttpServletAdapter$3.run(HttpServletAdapter.java:311)
[2011-Oct-19 17:29:15]      at weblogic.wsee.jaxws.HttpServletAdapter.post(HttpServletAdapter.java:336)
[2011-Oct-19 17:29:15]      at weblogic.wsee.jaxws.JAXWSServlet.doRequest(JAXWSServlet.java:98)
[2011-Oct-19 17:29:15]      at weblogic.servlet.http.AbstractAsyncServlet.service(AbstractAsyncServlet.java:99)
[2011-Oct-19 17:29:15]      at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
[2011-Oct-19 17:29:15]      at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
[2011-Oct-19 17:29:15]      at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
[2011-Oct-19 17:29:15]      at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
[2011-Oct-19 17:29:15]      at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
[2011-Oct-19 17:29:15]      at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3717)
[2011-Oct-19 17:29:15]      at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
[2011-Oct-19 17:29:15]      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
[2011-Oct-19 17:29:15]      at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
[2011-Oct-19 17:29:15]      at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
[2011-Oct-19 17:29:15]      at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
[2011-Oct-19 17:29:15]      at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
[2011-Oct-19 17:29:15]      at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
[2011-Oct-19 17:29:15]      at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
[2011-Oct-19 17:29:15] LiveLinkException [HR#09746]: Data Synchronization Server database cannot be created

What version of EAL have you installed, what OS + 32bit/64bit are you installing it on.
What version of the OUI did you use.
Have you gone through all the configuration steps successfully.
Cheers
John
http://john-goodwin.blogspot.com/

Oracle BPM Process Data mart

I am required to create audit reports on BPM workflows.
I am new to thid & need some guidance on configuring BPM Process Data mart. What are the pre-requisites for configuring it & what are the steps to do it.
Also, need some inputs on BAM database. What is the frequency of data upload. Is it data update or insert in BAM.

Hi,
You might want to check out the Administration and Configuration Guides on http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/index.html.
I suspect you might find the BAM and Data Mart portions of this documentation a bit terse, so I've added the steps below that provides more detail. I wrote this for ALBPM 6.0, but believe it will still work for Oracle BPM 10g. It was created from an earlier ALBPM 5.7 document Support wrote called "ALBPM 5_7 Configuring and Troubleshooting the BAM and DataMart Updater.pdf.
You can define how often you want the contents in both databases updated (actually inserted) and how long you want to persist the contents of the BAM database during the configuration.
Here's the contents of the document:
1. Introduction
The use of BAM (Business Activity Monitoring) and Data Mart (or Warehouse) information is becoming more and more widespread in today’s BPM project implementations for the obvious benefits they bring to the management and tuning of processes.
BAM is basically composed by a collection of measurements of current processes load and execution times. This gives us an idea of how the business is doing at this moment (in a pseudo real-time fashion).
Data Mart, on the other hand, is a historical view of the processes load and execution times. And this gives us an idea of how the business has developed since the moment the projects have been put in place.
In this document we are not going to describe exhaustively all configuration aspects of the BAM and Data Mart Updater, but rather we will quickly move from one configuration step to another paying more attention to subjects that have presented some difficulties in real-life projects.
2. Creating the Service Endpoints
The databases for BAM and for Data Mart first have to be defined in the External Resources section of the BPM Process Administrator.
In this following example the service endpoint ‘BAMJ2EEWL’ is being defined. This definition is going to be used later as BAM storage. At this point nothing is created.
Add an External Resource with the name ‘BAMJ2EEWL’ and, as we use Oracle, select the Oracle driver, then click <Next>:
On the following screen, specify:
·     the hostname – here I have used ‘localhost’ as I am just setting this up to work on my laptop
·     the port for the Oracle service
·     the SID – here I have use Oracle Express so the SID is ‘XE’
·     the new user to create / use in Oracle for this database – here I have specified ‘BPMBAM’. This user, and its database, will be created later
·     the password for the user
Scroll down to the bottom of the page and click <Save>.
In addition to a standard JDBC connection that is going to be used by the Updater Service, a remote JDBC configuration needs to be added as the Engine runs in a WebLogic J2EE container. This Data Source is needed to grant the Engine access over BAM tables thru the J2EE Connection Pool instead of thru a dedicated JDBC. The following is an example of how to set this up.
Add an External Resource with the name ‘BAMremote’ and select the Oracle driver, then click <Next>
On the following screen, specify:
·     the Lookup Name that will be used subsequently in WebLogic - here I have given it the name ‘XAbamDS’
Then click <Save>.
In the next example the definition ‘DWHJ2EEWL’ is created to be used later as Data Mart storage. If you are not going to use a Data Mart storage you can skip this step.
Add an External Resource with the name ‘DWHJ2EEWL’ and select the Oracle driver, then click <Next>:
On the following screen, specify:
·     the hostname – here I have used ‘localhost’ as I am just setting this up to work on my laptop
·     the port for the Oracle service
·     the SID – here I have use Oracle Express so the SID is ‘XE’
·     the new user to create / use in Oracle for this database – here I have specified ‘BPMDWH’. This user, and its database, will be created later
·     the password for the user
3. Configuring BAM Updater Service
Once the service endpoint has been created the next step is to enable the BAM update, select the service endpoint to be used as BAM storage and configure update frequency and others. Here the “Updater Database Configuration” is the standard JDBC we configured earlier and the “Runtime Database Configuration” is the Remote JDBC as we are using the J2EE Engine.
So, here’s the example of how to set up the BAM Updater service….
Go into ‘Process Monitoring’ and select the ‘BAM’ tab and enter the relevant information (using the names created earlier – use the drop down list to select):
Note that here, to allow me to quickly test BAM reporting, I have set the update frequency to 1 minute. This would not be the production setting.
Once the data is input, click <Save>.
We now have to create the schema and related tables. For this we will open the “Manage Database” page that has appeared at the bottom of the BAM screen (you may have to re-select that Tab) and select to create the database and the data structure. The user required to perform this operation is the DB system administrator:
Text showing the successful creation of the database and data structures should appear.
Once we are done with the schema creation, we can move to the Process Data Mart configuration screen to set up the Common Updater Service parameters. Notice that the service has not been started yet… We will get to that point later.
4. Configuring Process Data Mart Updater Service
In the case that Data Mart information is not going to be used, the “Enable Automatic Update” checkbox must be left off and the “Runtime Database Configuration” empty for this service. Additionally, the rest of this section can be skipped.
In the case it is going to be used, the detail level, snapshot time and the time of update should be configured; in addition to enabling the updater and choosing the storage configuration. An example is shown below:
Still in ‘Process Monitoring’, select the ‘Process Data Mart’ tab and enter the name created earlier (use the drop down list to select).
Also, un-tick the Generate O3 Cubes (see later notes):
Then click <Save>.
Once those properties have been configured the database and the data structure have to be created. This is performed at the “Manage Database” page for which the link has appeared at the bottom of the page (as with BAM). Even when this page is identical to the one shown above (for the BAM configuration) it has been opened from the link in the “Process Data Mart” page and this makes it different.
Text showing the successful creation of the database and data structures should appear.
5. Configuring Common Updater Service Parameters
In the “Process Data Mart” tab of the Process Monitoring section -along with the parameters that are specific to the Data Mart - we will find some parameters that are common to all services. These parameters are:
• Log directory: location of the log file
• Messages logged from Data Store Updater: severity level of the Updater logs
• Language
• Generate Performance Metrics: enables performance metrics generation
• Generate Workload Metrics: enables workload metrics generation
• Generate O3 Cubes: enables O3 Cubes generation
In this document we are not going to describe in detail each parameter. But we will mention a few caveats:
a. the Log directory must be specified in order for the logs to be generated
b. the Messages logged from Data Store Updater, which indicates the level
of the logs, should be DEBUG for troubleshooting and WARNING otherwise
c. Performance and Workload Metrics need to be on for the typical BAM usage and, even when either metric might not be used on the initial project releases, it is recommended to leave them on in case they turn out to be useful in the future
d. the Generation of O3 Cubes must be off if this service is not used, otherwise the Data Mart Updater service might not work properly .
The only changes required on this screen was to de-select the ‘Generate O3 Cubes’ as shown in the last section.
6. Set up the WebLogic configuration
We need to set up the JDBC data source specified above, so go to Services / JDBC / Data Sources.
Click on <Lock and Edit> and then <New> to add a New data source.
Specify:
·     the Name – use the name you set up in the Process Administrator
·     the JNDI Name – again use the name you set up in the Process Administrator
·     the Database Type – Oracle
·     use the default Oracle Database Driver
Then click <Next>
On the next screen, click <Next>
On the next screen specify:
·     the Database Name – this is the SID – for me that is XE
·     the Host Name – as I am running on my laptop, I’ve just specified ‘localhost’
·     the Database User Name and Password – this is the BAM database user specified in the Process Administrator
Then click <Next>
On the next screen, you can test the configuration to make sure you have got it right, then click <Next>
On the next screen, select your server as the target server and click <Finish>:
Finally, click <Activate Changes>.
7. The Last Step: Starting Up and Shutting Down the Updater Service
ALBPM distribution is different depending on the Operating System. In the case of the Updater Service:
-     For Unix like Operating Systems the service is started or stopped with the albpmwarehouse.sh shell script. The command in this case is going to look like this:
$ALBPM_HOME/bin$ ./albpmwarehouse.sh start
-     For Windows Operating Systems the service is installed or uninstalled as a Windows Service with the albpmwarehouse.bat batch file. The command will look like:
%ALBPM_HOME%\bin> albpmwarehouse.bat install
After installing the service, it has to be started|stopped from the Microsoft Management Console. Note also that Windows will start automatically the installed service when the computer starts. In either case the location of the script is ALBPM_HOME/bin Where ALBPM_HOME is the ALBPM installation directory. An example will be:
C:\bea\albpm6.0\j2eewl\bin\albpmwarehouse.bat
8. Finally: Running BAM dashboards to show it is Working
Now we have finally got the BAM service running, we can run dashboards from within Workspace and see the results:
9. General BAM and Data Mart Caveats
a. The basic difference between these two collections of measurements is that BAM keeps track of current processes load and execution times while Data Mart contains a historical view of those same measurements. This is why BAM information is collected frequently (every minute) and cleared out every several hours (or every day) and why Data Mart is updated infrequently (once a day) and grows indefinitely. Moreover, BAM measurements can be though of as a minute-by-minute sequence of Engine Events snapshots, while Data Mart measurements will be a daily sequence of Engine Events snapshots.
b. BAM and Data Mart table schemas are very similar but they are not the same. Thus, it is important not to use a schema created with the Manage Database for BAM as Data Mart storage or vice-versa. If these schemas are exchanged by mistake, the updater service will run anyway but no data will be added to the tables and there will be errors in the log indicating that the schema is incorrect or that some tables could not be found.
c. BAM and Data Mart Information and Services are independent from one another. Any of them can be configured and running without the other one. The information is extracted directly from the Engine Database (PPROCINSTEVENT table is the main source of info) for both of them.
d. So far there has not been a mention of engines, projects or processes in any of the BAM or Data Mart configurations. This is because the metrics of all projects published under the current Process Administrator (or, more precisely, FDI Directory) are going to be collected.
e. It is also important to note that only activities for which events are generated are going to be measured (and therefore, shown in the metrics). The project default is to generate events only for Interactive activities. This can be changed for any particular activity and for the whole process (where the activity setting, when specified, overrides the process setting). Unfortunately, there is no project setting for events generation so far; thus, remember to edit the level of event generation for every new process that is added to the project.
f. BAM and Data Mart metrics are usually enriched with Business Variables. These variables are a special type of External Variables. An External Variable is a process variable with the scope of an Instance and whose value is stored on a separate column in the Engine Instances table. This allows the creation of views and filters based on this variable. A Business Variable, then, shares all the properties of an External Variable plus the fact that its value is collected in all BAM and Data Mart measurements (in some cases the value is shown as it is for a particular instance and in others the value is aggregated).
The caveat here is that there is a maximum number of 256 Business Variables per FDI. Therefore, when publishing several projects into a single FDI directory it is recommendable to reuse business variables. This is achieved by mapping similar Business Variables of different projects with a unique real Variable (on the variable mapping performed at publish time).
g. Configuring the Updater Service Log
In section 5. Configuring Common Updater Service Parameters we have seen that there are two common Updater properties related to logging. These properties are “Log directory” and “Messages logged from Data Store Updater”, and they specify the location and level of these two files:
- dwupdater.log: which is the log for the Data Mart updater service
- bam-dwupdater.log: which is the log for the BAM updater service
In addition to these two properties, there is a configuration file called ‘WarehouseService.conf’ that allows us to modify these other properties:
- wrapper.console.loglevel: level for the updater service log
- wrapper.logfile.loglevel: level for the updater service log
- wrapper.java.additional.n: additional argument to the service JVM
- wrapper.logfile.maxsize: maximum size of the updater service log files
- wrapper.logfile.maxfiles: maximum number of updater service log files
- wrapper.logfile: updater service log file name (the default value is dwupdater-service.log)
9.1. Updater Service Log Configuration Caveats
a. The first three parameters listed above have to be modified when increasing the log level to DEBUG (since the default is WARNING). The loglevel parameters have to be set to DEBUG and a java.additional.n (where n is a consecutive integer to the already used ones) has to be set to –ea to enable asserts, since without this option no DEBUG message is going to be generated.
b. Of the other arguments, maxfiles might need to be increased to hold a few more days of data when the log level is set to DEBUG (with the default value up to two days are stored).
c. The updater service has to be stopped, uninstalled, installed and then started for any of these changes to take effect.
Hope this helps,
Dan

Processing cube on server taking too long, what can I do?

I have a fact table that has 22 million rows and 16 columns.
When I process it locally in Visual Studio, it completes in a reasonable time, about 40mins.
However when I use the Integration Catalog services and deploy the processing.
It takes about 6 hours.
I have now broken it into 5 partitions using a date field, each partition has about 5 million rows.
I have changed the cube datasource connection from native to OLEDB, I read this could improve performance up to 30%.
I also set the partition to process data.
Yet when I try to process a single partition in my local visual studio on a remote server it is still taking a very long time.
I even restarted the SQL server and Analysis Services to clear all the data from memory.
At the moment it has taken 30 mins, and is only at 410, 000.
When I log on to the server, I can see very little CPU activity, 1% SQL Server and 0% Analysis Services.
The server only has 16GB of ram and its currently using 11GB for SQL Server and 1GB for Analysis Services.
It is running on a Intel® Xeon® Processor E5-2630 v2 2.6.
Despite the RAM limitations, I would expect it to be able to cope with 5 million rows.
I have even tried reducing the partition to 1.5 million rows, and still it has taken 30 mins to do 60,000 rows and maxed out the memory.
I suppose I can keep reducing the partition size....
Anybody got any ideas what I can do to improve the performance?
Thanks
Jon

The server is set up with just a local drive.
How do I check the IO throughput? Is it something I can get from the resource monitor on the server?
Anybody know what is the difference of using Process full, data and index is?
I ran the whole lot with process index and parallel setting of 4 and managed to do it in 5 mins!
Hi JLJ1976,
According to your description, you SQL Server Analysis Services database contain large data, the problem is that it takes long time to process the cube, what you want is reducing the process time, right?
As your SSAS cube gets bigger, cube processing time will become a problem. We can create partition on the database so that it allows you to process multiple partitions in parallel on a server that has multiple processors. Or we can use SSIS package
to process the database at midnight. Please refer to the links below to see the tips about reduce process time.
http://www.jamesserra.com/archive/2012/01/improving-cube-processing-time/
http://blogs.prodata.ie/post/The-basics-of-faster-fact-processing-in-Analysis-Services.aspx
Besides, here is a blog that describe different process options in SSAS, please see:
http://blogs.msdn.com/b/karang/archive/2011/01/25/kind-of-ssas-processing-in-simple-words.aspx
Regards,
Charlie Liao
TechNet Community Support

The client could not be authenticated because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server

wireless authentication not working
I found the following in the radius
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          1/15/2014 2:07:57 AM
Event ID:      6273
Task Category: Network Policy Server
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:     NAP01.test.local
Description:
Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID:   doamin \user.a
Account Name:   user.a
Client Machine:
Security ID:   NULL SID
Account Name:   -
Fully Qualified Account Name: -
OS-Version:   -
Called Station Identifier:  00-0F-7D-C4-45-20:staff
Calling Station Identifier:  0C-74-C2-EF-Dd-0B
NAS:
NAS IPv4 Address:  192.168.9.10
NAS IPv6 Address:  -
NAS Identifier:   -
NAS Port-Type:   Wireless - IEEE 802.11
NAS Port:   497
RADIUS Client:
Client Friendly Name:  wcont1
Client IP Address:   192.168.9.10
Authentication Details:
Connection Request Policy Name: Wireless
Network Policy Name:  wism
Authentication Provider:  Windows
Authentication Server:  NAP01.test.local
Authentication Type:  EAP
EAP Type:   -
Account Session Identifier:  -
Logging Results:   Accounting information was written to the local log file.
Reason Code:   22
Reason:    The client could not be authenticated because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server.
Please help

Hi,
Anything updates?
In addition, this issue may also because your client didn't have CA certificate of your domain. Please make sure that your client has CA certificate.
Besides, the error "The client could not be authenticated because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server" may be due to that the default maximum transmission unit that NPS uses for EAP payloads is 1500
bytes. You can lower the maximum size that NPS uses for EAP payloads by adjusting the Framed-MTU attribute in a network policy to a value no greater than 1344:
Configure the EAP Payload Size
Best regards,
Susie

In oracle rac, If user query a select query and in processing data is fetched but in the duration of fetching the particular node is evicted then how failover to another node internally?

In oracle rac, If user query a select query and in processing data is fetched but in the duration of fetching the particular node is evicted then how failover to another node internally?

The query is re-issued as a flashback query and the client process can continue to fetch from the cursor. This is described in the Net Services Administrators Guide, the section on Transparent Application Failover.

Data in server is not updated

i have modify the data STREET to "ANG MO KIO"
http://i192.photobucket.com/albums/z231/yzme/d1.gif
but the data in server still "HEAVEN ST"
http://i192.photobucket.com/albums/z231/yzme/d2.gif
I am using Time2Way T01, if it is when i sync the data will be uploaded, or do i need to configure somewhere to get the data upload ?
if the data in client and middleware is different, when i sync , the data from the middleware will again download to the client replace the modified values
OR
the data in the client will uploaded to the middleware and trigger the MODIFY bapi wrappers ?
<b>
when i check my MEREP_MON, and MEREP_LOG there is no data inside this meaning after i changed the values and perform the sync, Inbox and Outbox still remain the previous data as well as inside the MEREP_LOG,
is it the bapi wrapper not call by the client ?
</b>
and i find out that my bapi not get called, what additional code should i add instead of the code below.
DO I NEED TO IMPLEMENT SOME CODE FOR UPLOADER ??
do i have to change the reqDirectSync="true", if yes, how do i changed, just change inside the editor, or there is somewhere to configure in sapgui
after i changed the data , i try to sync, and i check on merep_mon
what specific or additional steps i need to configure, on uploader / receiver or synchronizer
<b>i do not implement any syncBoDelta or global reset ?</b>Can someone explain the term "delta" to me and its activities?
if i have upload something, and sync, the Inbox should have something right ??
i just put add this code to modify my records
public String modifyRecord(String eventName,boolean didNavigate){
                         String syncBoName="ZCON";
                         String syncKey="0001230297";
                         tableViewBean.setString(syncBoName +" "+syncKey);
                         System.out.println("SyncBoName: " +syncBoName + " syncKey: " +syncKey);
                         tcp = TableContentProvider.instance(syncBoName);
                         tcp.modifyTable(syncBoName,syncKey);                                   return JSP_DETAIL_SYNCBOINSTANCE;
public void modifyRecord(String syncBoName,String syncKey){
SyncBoDescriptor sbd=null;
sbd=descriptorFacade.getSyncBoDescriptor(syncBoName);
SyncBo sb=null;
try{
System.out.println("bp 2");
sb=dataFacade.getSyncBo(sbd,syncKey);
}catch(PersistenceException pex){
System.out.println("Exception in modifyRecordLoc:" +pex.getMessage());
SmartSyncTransactionManager transactionManager;
try{ transactionManager=dataFacade.getSmartSyncTransactionManager();
if(!transactionManager.isTransactionStarted()){
transactionManager.beginTransaction();
boolean b8=false;
b8=setHeaderFieldValue2(sb,"STREET","ANG MO KIO");
transactionManager.commit();
SetSendType();
listAllOutDelta();
checkInboxConflict();
}catch(Exception e){
System.out.println("Exception in modifyRecordAmt2:" +e.getMessage());
public void checkInboxConflict(){
          ErrorConflictInbox errorConflictInbox= SmartSyncRuntime.getInstance().getInboxNotifier().getErrorConflictInbox();
          MeIterator iter;
          SyncBoResponse resp;
          try {
          iter= errorConflictInbox.getAllSyncBoResponses();
          while(iter.hasNext()){
          resp= (SyncBoResponse)iter.next();
          String bo=resp.getSyncBoDescriptor().getSyncBoName();//SyncBo Name
          String state=resp.getSyncBoResponseState().toString();
          String res=resp.getResponseType().toString();//Get the SyncBo response type (conflict or ERROR)
          String msg=resp.getText();// This will return the exact message from the server
          System.out.println("bo:" +bo +" state: " +state +" res: " +res +" msg:" +msg);
          System.out.println("state:" +resp.getSyncBoResponseState().toString());
          if(resp.getSyncBoResponseState().equals(SyncBoResponseState.INITIAL)){
               String a=resp.getSyncBoResponseState().toString();
               resp.acceptClientSyncBo();
               String b=resp.getSyncBoResponseState().toString();
               resp.delete();
               System.out.println("state1: " +a +"state2: " +b);
          boolean syncStatusComplete= SmartSyncRuntime.getInstance().getInboxNotifier().isSyncStatusComplete();
          System.out.println("syncStatus:" +syncStatusComplete);
          }catch (Exception e) {
          e.printStackTrace();
public void listAllOutDelta(){
          SyncBoOutDeltaFacade deltFac=SmartSyncRuntime.getInstance().getSyncBoOutDeltaFacade();
          MeIterator allDelta;
          try {
               allDelta = deltFac.getAllDelta();
               while(allDelta.hasNext()){
                         SyncBoOutDelta outDelta=(SyncBoOutDelta)allDelta.next();
                         System.out.println("SyncKey:" +outDelta.getSyncKey() +" Action:" +outDelta.getAction()
                                   +" State:" +outDelta.getStateId() +" SendType:"+outDelta.getSendType());
          } catch (SmartSyncException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (PersistenceException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
public void SetSendType(){
          SmartSyncRuntime ssRuntime = SmartSyncRuntime.getInstance();
          SyncBoOutDeltaFacade boDeltaFacade = ssRuntime.getSyncBoOutDeltaFacade();
          SyncBoDescriptorFacade descF = ssRuntime.getSyncBoDescriptorFacade();
          SyncBoDescriptor myBO = descF.getSyncBoDescriptor("ZCON");
          boDeltaFacade.setSendType(myBO, SyncBoOutDeltaSendType.SEND_DIRECT);
//SyncManager.getInstance().synchronizeWithBackend(VisibilityType.USER_SHARED);
     public boolean setHeaderFieldValue2(
          SyncBo sb,
          String headerFieldName,
          Object value) {
          SyncBoDescriptor sbd = sb.getSyncBoDescriptor();
          //RowDescriptor trd = sbd.getTopRowDescriptor();
          System.out.println("bp 10");
          RowDescriptor trd=sbd.getRowDescriptor("010");
          System.out.println("bp 11");
          FieldDescriptor fd = trd.getFieldDescriptor(headerFieldName);
          System.out.println("fd:" +fd.getFieldName());
          if (fd != null) {
          BasisFieldType bft = fd.getFieldType();
          //Row header = sb.getTopRow();
          System.out.println("bp 12");
          //Row header = null;
          Row[] header=null;
          //try {
               //header = sb.getRow("0001211181");
               //header=sb.getTopRow();
               header=getItemInstances(sb,"010");
               if(header==null){
                    System.out.println("is null");
               }else{
                    System.out.println("not null");
          //} catch (PersistenceException e1) {
               // TODO Auto-generated catch block
          //     System.out.println("Exception getRow:" +e1.getMessage());
          //     e1.printStackTrace();
          System.out.println("bp 13");
          try {
//             Integer operator
          if (bft == BasisFieldType.N) {
               System.out.println("Numeric");
          NumericField nf = header[0].getNumericField(fd);
          if (nf != null) {
          BigInteger ii = new BigInteger(value.toString());
          nf.setValue(ii);
          return true;
          } else {
          return false;
//             Character operator
          if (bft == BasisFieldType.C) {
               System.out.println("Character");
          CharacterField cf = header[0].getCharacterField(fd);
          if (cf != null) {
          cf.setValue(value.toString());
          return true;
          } else {
          return false;
//             Decimal operator
          if (bft == BasisFieldType.P) {
               System.out.println("Decimal");
          DecimalField df = header[0].getDecimalField(fd);
          System.out.println("bp 1.1");
          if (df != null) {
               System.out.println("bp 1.2");
          BigDecimal bd = new BigDecimal(value.toString());
          System.out.println("bp 1.3");
          df.setValue(bd);
          System.out.println("bp 1.4");
          return true;
          } else {
               System.out.println("bp 1.5");
          return false;
//             Similar operation for time and date operator fields
          if (bft == BasisFieldType.D) {
               System.out.println("Date");
          DateField df = header[0].getDateField(fd);
          if (df != null) {
          if (value.toString().equals("0")) {
          Date dat = Date.valueOf("0000-00-00");
          df.setValue(dat);
          } else if (!value.toString().equals("")) {
          Date dat = Date.valueOf(value.toString());
          df.setValue(dat);
          } else {
          Calendar cal = Calendar.getInstance();
          java.sql.Date bd =
          new java.sql.Date(cal.getTime().getTime());
          df.setValue(bd);
          return true;
          } else {
          return false;
//             Similar operation for time and date operator fields
          } catch (SmartSyncException ex) {
          System.out.println(ex.getMessage());
          } catch (PersistenceException e) {
          System.out.println(e.getMessage());
          return false;
SyncType: T01 Wrapper: GetList,GetDetail,Modify
<?xml version="1.0" encoding="utf-8" ?>
- <MeRepApplication schemaVersion="1.1" id="ZCON" version="01">
<Property name="CLIENT.BUILDNUMBER" />
<Property name="C_APPLRESOLVE" />
<Property name="DATA_VISIBLE_SHARED">X</Property>
<Property name="E_APPLRESOLVE" />
<Property name="FACADE_C_CLIENT">X</Property>
<Property name="FACADE_E_CLIENT">X</Property>
<Property name="HOMEPAGE.INVISIBLE" />
<Property name="INITVALUE" />
<Property name="RUNTIME">JSP</Property>
<Property name="TYPE">APPLICATION</Property>
- <SyncBO id="ZCON" version="1" type="timedTwoWay" allowCreate="false" allowModify="true" allowDelete="false" reqDirectSync="false" downloadOrder="1">
- <TopStructure name="TOP">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="PERSNUMBER" type="N" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <ChildStructure name="010">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="PERSNUMBER" type="N" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="CITY1" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="CITY2" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="STREET" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="HOUSE_NUM" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="REGION" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
</ChildStructure>
</TopStructure>
</SyncBO>
</MeRepApplication>
Message was edited by:
        yzme yzme

<u>my intention is very simple, i just need to update a field in a row and update to the middleware so that the backend will reflect the changes. </u>
>2 if i set the conflict/error handling to application, then i should have to implement some code for it, right ?
>3) List syncbooutdelta
<b>SyncKey:0001233035 Action:M SendType:SEND</b>
doesnt it mean that when i sync , the uploader will pick up this data and do a modification ??
i have change the metadata like this
<SyncBO id="ZCON" version="1" type="timedTwoWay" allowCreate="false" allowModify="true" allowDelete="false" reqDirectSync=<b>"true" </b>downloadOrder="1">
1) i try to sync the application and check the worklist monitor, there is nothing in the inbox ? how come ?
2)if i test using emulator, i try to modify a value and execute, i am getting the following error.
<u>
Header action from mobile="MOD", R/3 action="ADD"
Return code 1 (DOWNLOADER)
</u>
i try to modify not "Add"
3) I am using Time 2 Way , how to check it is synchronous or asynchronous ? in merep_sbuilder, the default asyn. is checked, meaning async ??
the type is T01 , ASYNC
4)
public void checkInboxConflict(){
          ErrorConflictInbox errorConflictInbox= SmartSyncRuntime.getInstance().getInboxNotifier().getErrorConflictInbox();
          MeIterator iter;
          SyncBoResponse resp;
          try {
          iter= errorConflictInbox.getAllSyncBoResponses();
          while(iter.hasNext()){
          resp= (SyncBoResponse)iter.next();
          String bo=resp.getSyncBoDescriptor().getSyncBoName();//SyncBo Name
          String state=resp.getSyncBoResponseState().toString();
          String res=resp.getResponseType().toString();//Get the SyncBo response type (conflict or ERROR)
          String msg=resp.getText();// This will return the exact message from the server
          System.out.println("bo:" +bo +" state: " +state +" res: " +res +" msg:" +mtext);
          boolean syncStatusComplete= SmartSyncRuntime.getInstance().getInboxNotifier().isSyncStatusComplete();
          System.out.println("syncStatus:" +syncStatusComplete);
          }catch (Exception e) {
          e.printStackTrace();
<u>bo:ZCON state: INITIAL res: CONFLICT msg:Conflict: R/3 = delete, device = modify
SyncStatus=true (complete)
</u>
5) after that i change my code to this
while(iter.hasNext()){
if(resp.getSyncBoResponseState().equals(SyncBoResponseState.INITIAL)){
    String a=resp.getSyncBoResponseState().toString();
    String a1=syncBO.getSyncState().toString();
    resp.acceptClientSyncBo();   //No transaction stated to commit
    resp.delete();
String b=resp.getSyncBoResponseState().toString();
String b2=syncBO.getSyncState().toString();
System.out.println("state1: " +a +"state2: " +b);
System.out.println("SyncState1: " +a1 +"SyncState2: " +b1);
<u>state1: INITIAL state2: RESOLVED </u>
<u>SyncStatus1:QUANRANTINE SyncStatus2: INCONSISTENT</u>
and i try to sync ...no data in worklist
6)i try to list out all the delta to be uploaded
ListAllOutDelta to be upload
<u>SyncKey:0001233349 Action:I State:99925F8E24DFFE49A4563C5E018E9B61 SendType:SEND
</u>
i am modifying the rows, not Insert a new row, the Action:'I' instead of 'M', pls clarify on this.
after i sync, i found out that there is 2 record with different syncKey but same primary key and all attributes appear to be same except the attribute that i changing.
<u>SYNCKEY    PERSNUMBER CITY STREET HOUSENO</u>
0001230298 000000000 HELL <u>ANG MO KIO</u> 0123456789 (modified record)
0001230299 000000000 HELL <u>HEAVEN ST</u> 0123456789(old record)
i check the application and found out that the previous record that i modify have its value changing locally but not updated into the backend, after sync, there is another record downloaded into this application which is the old record before i modify with different syncKey.
but when i check the backend table, there is only 1 record inside, because i dont implement the 'Create' Bapi.
does it make sense ?
7) when i check my client , the data is persisted with modified value , but the changes is not reflected in the server, how come the data in client is not uploaded to the server.
acceptClientSyncBo will make the client wins how come the data is not get updated in server ?
Re: Regarding modifying Sync BO
According to him, can anyone translate the things highlighted below
for modifying one sync bo instance , there is no need to use createUnlinkedCopy()..
just use like this..
sb = dataFacade.getSyncBo(sbd,key);
SmartSyncTransactionManager transactionManager;
transactionManager = dataFacade.getSmartSyncTransactionManager();
transactionManager.beginTransaction();
setHeaderFieldValue(sb,"PERSNUMBER","9866321467");
setHeaderFieldValue(sb,"FIRSTNAME","RajaSekhar");
setHeaderFieldValue(sb,"LASTNAME","Varigonda");
setHeaderFieldValue(sb,"PROFESSION","Technical Specialist");
setHeaderFieldValue(sb,"***","MALE");
setHeaderFieldValue(sb,"BIRTHDAY","1977-09-28");
setHeaderFieldValue(sb,"HEIGHT","165");
setHeaderFieldValue(sb,"WEIGHT","75");
// Commit the transaction
transactionManager.commit();
setHeaderFieldValue - can be used to set value in new sync bo instance , or modify the instance.
<b>
But one main think here have to consider is , if you have created one Sync Bo instance , not synchronized with back end and u have modified that, then thats just like a creation .So during sync this will call Create Bapi Wrapper.
</b>
But after synchronization , is u are modifying that instance , then it is a modification(will call MODIFY Wrapper in back end during synchronization). u must have the right to modify this instance in the client side.
hope u got it.
u can debug MI Applications in NWDS.
refer this blog written by Arun
/people/arunkumar.ravi/blog/2006/02/22/execute-debug-your-mi-code-from-nwds
let me know , if u have doubts
Regards
Kishor Gopinathan
pls comment...

How do I troubleshoot installation/distribution of a LabVIEW .exe which processes data using Matlab when it works on some computers but not others?

I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.

Jay del Rosario wrote:
>
> How do I troubleshoot installation/distribution of a LabVIEW .exe
> which processes data using Matlab when it works on some computers but
> not others?
Poke around zone.ni.com and
http://digital.natinst.com/public.nsf/$$Search/ .
Good luck, Mark

Good for processing data from a web application?

It seems like all the examples provided for ASA are about processing data streaming in from IoT or mobile apps. Is ASA appropriate for processing data from websites? For example, I have a multi-tenant web API and I need to roll up usage and calculate billing
for my clients. My clients can upload resources with me which I store in blob storage. But blob storage gives me no way of knowing how many resources have been uploaded and how long I have stored them. Would ASA be a good fit for calculating these figures?

I have solved this task in folowing way:
I have add ADF read only form to my page (which I need anyway). The form displays data selected in the graph (using another VO, which is linked to graph VO). Command button calls my managed bean, which handles the data via the bindings executables (view iterators).

Process data in server

Similar Messages

Maybe you are looking for