Process does not perform an update.

I have this PL/SQL process in my page:
UPDATE tag_order
SET order_date = SYSDATE
WHERE order_number = :P16_Order_Number;
COMMIT;
Unfortunately, it does not perform the update. What could be wrong?
FYI: In order to get to the page where this process is located, you first go to a page that contains an Interactive Report region (Page 15). When you click on one of the rows in that report region, page 16 is loaded and the :P16_Order_Number item is loaded with the order number from the report page. I'm not sure if that has anything to do with the problem, but I mention it because :P16_Order_Number is referenced in the update statement. Could it be that its session state is not set?
Any advice would be appreciated. Thanks.

Thanks for your responses. Your answer seems perfectly logical, unfortunately, it did not work.
I made a copy of P16_Order_Number and called it P16_Order_Number_Visible and made it a 'Display as Text'.
Then I changed P16_Order_Number to 'Hidden' The report was already set up to set P16_Order_Number to Order_Number, so nothing had to be changed there, or in the Process that referenced P16_Order_Number, since it is now referencing the Hidden item.
But when I ran it, loaded page 16 and clicked Session, P16_Order_Number had the correct value 172, but P16_Order_Number_Visible had no value, even though its Source has been set to P16_Order_Number and the value 172 was actually displayed from P16_Order_Number_Visible on page 16.
Furthermore, the update did not work. So what is wrong here?
Thanks.

Similar Messages

DRQ# Approval Process Does Not Fire on Update of Document

Hi,
If a purchase order is added for a value which does not require approval, then later the actual price of the order is known and is a value which requires approval, the user is able to update the purchase order without an approval procedure being triggered.
Note #925685 states that approvals will not trigger on update, however this means a user can modify documents to a value which should require an approval process.
Lianne

Hi Lianne and Davis,
I was wondering if you already found a solution for this problem.
Unfortunately I did not found your post about the approval process.
( Re: 925685 - Approval process is not triggered after documents are added )
Do you know if this is solved within 8.81 or did you find another solution?
Kind regards,
Marcel Kieboom

Update process does not work on Tabular Form

Hello,
I have 2 tabular forms on one page, which are using manual update processes.
First form is created using wizard, and therefore works perfectly.
The update process is as follows:
DECLARE
lc_string VARCHAR2(4000);
BEGIN
FOR i IN 1..APEX_APPLICATION.G_f01.COUNT
LOOP
     lc_string := lc_string|| '[' ||APEX_APPLICATION.G_f*03*(i) || '|' || APEX_APPLICATION.G_f*04*(i) || ']';
END LOOP;
--Database processing using the concatenated string here
END;Second form is created manually, using the following code:
SELECT apex_item.checkbox (30,
                           '#ROWNUM#',
                           'onclick="highlight_row(this,' || '#ROWNUM#'|| ')"',
                           NULL,
                           'f30_' || '#ROWNUM#'
                          ) delete_checkbox,
       CATALOG_ID,
          apex_item.hidden (31, CATALOG_ID)
       || apex_item.text (32,
                          LANG,
                          80,
                          100,
                          'style="width:100px"',
                          'f32_' || '#ROWNUM#'
       || apex_item.hidden (33, wwv_flow_item.md5 (LANG, DESCRIPTION)) LANG,
       apex_item.text (34,
                       DESCRIPTION,
                       80,
                       100,
                       'style="width:255px"',
                       'f34_' || '#ROWNUM#'
                      ) DESCRIPTION
FROM V_CATALOGS
UNION ALL
SELECT     apex_item.checkbox
                          (30,
                           TO_NUMBER(9900 + LEVEL),
                           'onclick="highlight_row(this,' || '#ROWNUM#' || ')"',
                           NULL,
                           'f30_' || TO_NUMBER (9900 + LEVEL)
                          ) delete_checkbox,
           NULL,
              apex_item.hidden (31, NULL)
           || apex_item.text (32,
                              NULL,
                              80,
                              100,
                              'style="width:100px"',
                              'f32_' || TO_NUMBER (9900 + LEVEL)
           || apex_item.hidden (33, NULL) LANG,
           apex_item.text
                                           (34,
                                            NULL,
                                            80,
                                            100,
                                            'style="width:255px" ' ,
                                            'f34_'
                                            || TO_NUMBER (9900 + LEVEL)
                                           ) DESCRIPTION
      FROM DUAL
     WHERE :P18_TEMP = 'ADD_ROWS1'
CONNECT BY LEVEL <= 1However, the update process does not work on this form.
I created it using the first one as an example, but with the id's of the second form:
DECLARE
lc_string VARCHAR2(4000);
BEGIN
FOR i IN 1..APEX_APPLICATION.G_f*30*.COUNT
LOOP
     lc_string := lc_string|| '[' ||APEX_APPLICATION.G_f*32*(i) || '|' || APEX_APPLICATION.G_f*34*(i) || ']';
END LOOP;
--Database processing using the concatenated string here
END;Also, both forms are opening in a modal pop-up dialog window.
I use a Dialog Region plug-in for that.
Please advise, what is causing a problem with update?

Sloger,
if this is your tabular form
SELECT apex_item.checkbox (30,
...and this is your update statement
FOR i IN 1..APEX_APPLICATION.G_f*30*.COUNT
...Then you will only ever update records that have been checked. Unchecked checkboxes are not passed back in the global array. You need to have a hidden column with the ID's for the record and loop through that when you are updating/inserting. That is why the built in tabular form has a MRU and a MRD. the MRU loops through the hidden ID column. The MRD loops through the checkbox.
Thanks,
Tyson Jouglet

Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update

Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update.
How/Where to increase the relationship count?
The message which I can see :
Warning:
This specification has exceeded the number of parent relationships allowed by Where Used. The Where Used tool only supports up to 500 parent relationships.
Thanks

This really brings up a larger topic around change management.
The questions you should start with is
1. What kind of change is happening to the raw material?
2. Will this change affect anything upstream inside or outside of PLM4P? (Will this change affect nutrition, compliance, the ingredient statement, the label etc?)
3. Who needs to approve this change?
If they are non-material changes (changes that don't affect theoretical calculations, the ingredient statement, labeling, upstream systems that need to be notified etc) then you should be using get latest revision instead of global succession. Get Latest Revision will automatically switch out the material with the latest approved version. This logic is also configurable in case you need to add additional guard conditions. We can also provide guidance around locking the get latest revision lock once a specification has reached the retired/obsolete state so changes won't occur for specifications in those statuses.
If the changes to the raw material are material changes (changes that affect calculations, labeling etc) then the change should be reflected with a copy of the specification. Dependent specifications then need to be re-issued so calculations can be performed and the appropriate workflow reviews can occur. Smart Issue allows for filtering based on status and should let you re-issue in smaller blocks.
Let me know more about your change management strategy, how often large material changes happen and maybe example causes for those mass changes. We can also schedule a change management training session for everyone where we can share our vision and tools available for change management. This topic is quite large and generally requires a lot of business process discussion beyond just the tools available.
Thanks
Kelly

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer. I can ping all
network devices. I can connect to the internet.
On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

Hi,
After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller.
Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
go through beneath article for more details.
1. Event ID 5719 is logged when you start a computer
2. Netlogon 5719 and the Disappearing Domain [Controller]
3. Event ID 1129 — Microsoft-Windows-GroupPolicy
Hope it helps!
Regards.

I can not perform software updates or download any programs. They appear in the download box as images that are not recognized. How can I fix this?

I can not perform software updates or download any programs. They appear in the download box as images that are "not recognized". I thought maybe my antivirus software was setting up a firewall, but I have disabled it, so that's not the case. Any suggestions as to how I can fix this?

If the downloads are gone, it's possible that Windows is removing the downloads based on security policies set in IE. I realize that sounds strange, but it's related to Firefox's feature of submitting downloads to your virus scanner and marking them as having come from the internet.
To test this theory, you could try disabling the scan feature. I assume you have good "real time" antivirus protection which checks every file saved to your hard drive. (If not, you really should get that, and you can use Microsoft's free [http://windows.microsoft.com/en-US/windows/products/security-essentials Microsoft Security Essentials] for now until you have time to review all the available choices.)
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''scan''' and pause while the list is filtered
(3) Double-click '''browser.download.manager.scanWhenDone''' to toggle its value.
Firefox now should ignore Windows' download security. Does it change how Windows handles the file?

HT4972 How come my iPad does not have software update in the settings?

Help, my iPad does not have software update available in settings, how do I update?

The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972

Service reads data but Bpel process does not start

i have a very simple project. I have db2(as400) adapter and it reads data, i will receive data, transfom and send to oracle database. I deployed the project successfuly but when instance start i see the service reads the data but bpel process does not start and and there is no error. At the flow chart there is only readAS400 partnerlink, there is no bpelprocess. In the partnerlink i am usin polling, i read the data's with 1 and update to 2. It reads but dont update to 2.
In deploy step and when instance starts there is no errors. But when i am deploying i get a warning but i dont know it's related with this situation.
(Warning: property "activationAgent.readAs400.className" may not be understood by BPEL component BPELProcessEqpType - it will likely be ignored.)
Do you have any suggestion ? Thanks in advance.

check the recovery console, the bpel process possibly is going into manual recovery,
Another thing you might wanna try is using checkpoints in your process..
also, instead of getting the db adapter to instantiate the process, try a simpler process just to see if the db adapter is working or not..
A normal process, which you manually instantiate from em console, with the db adapter in it after the recevie activity
Edited by: AshishSharma on Jun 24, 2010 5:48 PM

My ipad2 settings menu does not have an update software listed. I'm trying to update to ios5

My ipad2 settings page menu does not have an 'update software' on it. How do I update to ios5?

The update to iOS 5 is a lengthy process. Your entire device is being backed up, then wiped, then the new OS is installed, then your apps, etc., rebuilt on the device. If you have a lot apps, etc., on your device it will take a long time to update.

ORB does not perform clean up after destroy() is called.

hi,
the HelloClient example (POA model) which is provided in the Java IDL tutorials, does not perform clean up after the execution is complete.
i.e. i can still find the Socket descriptors in the file system under the path (/proc/p_id/fd). Do we need to explicitly destroy the sockets inorder to perform the required clean up??the OS i'm using is Linux.
if yes, then how do i do that.... the following are the steps to reproduce the problem:
1)start HelloServer
2)start HelloClient
3)check file count in /proc/process_id/fd before calling init.
4)invoke ORB.destroy() method.
5)check file count in /proc/process-id/fd after destroy completes.I have included Thread.sleep(25000) inorder to check the file count dynamically at each stage of execution.
Any help in this regard is welcome....!!
thanks in advance

Hello:
This reply may be long after the time that you need it ... but the problem
that you are experiencing sounds very much like a bug that was fixed in the J2SE 1.5.0_10 release.
It is bug 6354718 ....
In the evaluation section of that bug they note:
Yes. It's a known bug in ORB connection management. What's happening here is, the connectionCache that maintains both inbound and outbound connections does not reclaim connections, upon ORB destroy() call. There is a connection reclaim() logic in place, but does not kick in, until it reaches certain watermark levels. Since, a single client can have a multiple ORBs and thereby multiple outbound connections (in the reported case) , with each cache having exactly one connection which leaks up on ORB exit. This leak multiplies based on the number of ORBs and time period over which client stays live, up and running.
The solution is, to walk through the connection cache and close each connection,
no matter what the watermark levels are. This can be done at the corba transport manager close() call.
Note: In the above evaluation they tell you how to fix it yourself but I believe (I haven't tested it yet ....) that if you upgrade to JDK 1.5.0_10, you should find that it has been fixed for you.
I hope that I'm not steering you wrong, but that's my take on your situation.
John

My settings "general". Does not show a"update software " choice from the menu?

My settings "general". Does not show a"update software " choice from the menu? I cannot find what iOS software I'm currently using or what iPad I have

The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

HT1688 My Hot Spot does not work after update to 6.0.1. Service is with ATT. Apple says problem is with ATT, ATT says problem is with Apple. Anyone else having this problem?

My Hot Spot does not work after update to 6.0.1. Any suggestions?

Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

Click to activate does not work after update

Click to activate plugin does not work after updating to version 23.0.1

hello Kamullia, if you have set click-to-play to true in about:config you can now go to the ''addons-manager > plugins'' section and set the permissions individually for each plugin type.

WiFi iPhone 4S does not work after update iOS 6.0

WiFi iPhone 4S does not work after update iOS 6.0

This sounds more like a hardware issue.
Have you checked that the dock connector port is not dirty?

HT201240 This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I

This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I created. I am logged in as myself and it states that I am an "Admin". The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users.
Can someone help me? I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on? What if this were my child? This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
Any help would be appreciated. (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
Thanks.

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

Process does not perform an update.

Similar Messages

Maybe you are looking for