Process for migrating CMSDK from one server to another

All:
We are in the process of migrating our CMSDK installation and database from one server to another. In doing so, we would like to retain our documents and folders and other custom objects that have been created till date. If there is a recommended migration process that you could point us to, it would be greatly appreciated.
Our initial thought is to:
1. Install the CMSDK server on the target server machine
2. Export source CMSDK schema from source database server
3. Import source CMSDK schema into target database server
Are we on the right track? If so, are there any pitfalls and issues we can expect to encounter. Any information will be very helpful.
Thanks

The utility should help you a lot. The best documentation on how to use the utility is in the 9iFS Setup and Administrators guide (doc number A95995-01) Chapter 8. It pretty much works the same way then as it does now. These are two metalink notes on doing the export/import silently (29928.1 - 177816.1). Doing it silently is very tedious since you having to create numerous .def files and other scripts to run them.
I will look around for any other stuff I have, but the 9iFS document is very good as a reference no matter what version of CMSDK. If you have problems finding it, I can try to send it to you, but it is around 5.6M.

Similar Messages

  • Migrate tracks from one server to another

    Hello, I've read a few guides how to migrate tracks from one server to another, but it doesn't help me.
    What I've done:
    1) I've exported my SC from SLD at my old server
    2) Then imported it at my new server
    3) Updated CMS from SLD
    4) Created a track at my new server and added imported SC
    Then I have to import my SC from old server with sources and there is some errors happens for me.
    First option: I have exported my SC from CMS, but the SCA file is about 5kB. I unzipped it and there was ARCHIVESOURCE folder but it hasn't anything seems to be my sources. That file is checked-in successfully through the transport studio, but no sources imported into DTR.
    Second option: I have exported the SCA file by using NWDS. It's exported OK, size ~1.3MB, ARCHIVESOURCE folder with mine sources. But when I try to check-in it, it fails with an error "import failed, because the sources are not contained in the archive
    Could anybody helps me to achieve my task? I stuck with source import.

    Hi Kirill,
    important to know that assembly ALWAYS uses the CONS/ACTIVE workspace for SCA generation.
    If you for instance create a change (an activity), and you activate and release it but you don't import this activity into CONS, then it won't be part of the CONS/active and then due to obvious reasons assembly won't produce the sources either (no possibility to do an explicit activation on cons level as here a force activation takes place at import, but of course the import into cons is a necessary step, because as mentioned assembly uses the cons/active).
    Can you please confirm/deny how this scenario looks like on your end?
    Thank you!
    Best Regards,
    Ervin

  • Migration databases from one server to another

    Hi All
    I want to migrate our 8 production databases from one server to another server. these are in RAC .Details are below
    OLD SERVER: -
    OS: REDHAT LINUX 3
    ORACLE: ORACLE 10gR1
    FILE SYSTEM : OCFS
    STORAGE: SAN
    Its a RAC databases
    NEW SERVER: -
    OS: REDHAT LINUX 5
    ORACLE: ORACLE 11g R2
    FILE SYSTEM:ASM
    STORAGE:SAN ( fresh one)
    Its also RAC DATABASES
    So please tell me the best method to migrate 8 databases from old server to another server . all databases size are not more than 50 GB.
    All servers details are above .please let me know if you require any other details
    please reply soon we have to do it on urgent basis

    Since all your databases are small (< 50G), I would recommend using expdp/impdp - http://download.oracle.com/docs/cd/E11882_01/server.112/e17222/expimp.htm - as this will provide several advantages as listed in the document.
    Different Upgrade Methods For Upgrading Your Database (Doc ID 419550.1)
    HTH
    Srini

  • Migrating Planning from one server to another

    We are in 11.1.1.3. I had the planning repository copied from one server (server1) to another (server2). also had the shared services and the EAS repository copied from server 1 to server 2. When I open Planning in Server 2, I see the name of the planning app in Server 1 and the data source connection also shows connection to server 1. How can I fix this to point to server 2? Thanks.

    You just cannot change the name of application like that. If you need to change the name of application, you needed to do this before migration.
    Lets say your source app is S and target is T. Application owners for S and T HAVE to be same (use external user if possible)
    1. Create application T
    2. Copy relation database from S to T
    3. Copy Essbase database from S to T
    4. log on to T and make sure its pointing to correct shared services instance
    This will ensure the application has been migrated excluding business rules and security. This was the old way to do this. In v11, you should be using LCM. It might be little quirky if you have duplicates names (such as task list, web forms) but it does work. We have used LCM to migrate application successfully and its very easy to use.

  • Migrating OWB from one server to another

    We are migrating Oracle 10.2 DB+10.1 OWB from Server A (production) to Server B (proposed production).
    steps performed:
    1. cloned the db to the destination server (B).
    2. installed 10.1 OWB on destination server (B).
    Note that OWB in server A does nightly data load.
    While configuring Server B, do I need to create a fresh OWB repository OR there is a way to clone OWB settings from Server A to Server B?
    Pl help.

    actually i did this many times
    im not sure if there is a way to migrate the repository
    but i used to build a fresh one each time,
    i think this is a better methodology to build a new one because you will need to better assign the table spaces at the new server.
    Please let me know if you find a way to migrate that
    all the luck

  • Migrating Application From One Server to Another

    I am trying to migrate an app from our dev environment to our test environment. The app already exists on the test environment. Is there a way to just overwrite what is on the test environment, or do I have to delete or rename the old one. I am using Essbase Administration Service to do the migration.

    I am trying to migrate an app from our dev environment to our test environment. The app already exists on the test environment. Is there a way to just overwrite what is on the test environment, or do I have to delete or rename the old one. I am using Essbase Administration Service to do the migration.

  • Best Practice for Migration of BO  from one server to another

    Hi All,
               I would like to know what is the Best pratice for Migration of BO from One server to another.
    i have Installed BO Xi R2 on my server.
    Thanks,
    Anendu Bothra
    Edited by: Anendu Bothra on Mar 5, 2009 10:24 AM

    You need to copy your input and output file stores from the old server to the new server. By default these are located in the <Business Objects install path>\FileStore directory.
    Then you need to stop the CMS, Right click the CMS,Click the Configuration tab, and then click Specify.
    Choose Copy, then click OK.
    Choose the version information for the source CMS database.
    Select the database type for the source CMS database, and then specify
    its database information (including host name, user name, and password).
    Select the database type for the destination CMS database, and then
    specify its database information (including host name, user name, and
    password).
    When the CMS database has finished copying, click OK.
    Once this process has been completed start the CMS and click on update objects -> located on the top of the CCM.
    I'd advise taking full backups beforehand.

  • Import Wizard vs LCM for Migration of BO from one server to another

    Hi Experts,
    Can anyone highlight the differences between Import Wizard and LCM (in terms of migrating/deploying BO from one server to another)?
    We are currently using BO XI 3.0, which does not support LCM. I'd like to know if LCM has enough advantages to justify an upgrade to BO XI 3.1.
    Any advice is much appreciated.
    Linda

    Hi Tim,
    Thanks a lot for your reply. May I have a follow-up question?
    For my client, the following deployment activities are necessary:
    1) From Development server, to one Test server containing 2 separate sets of objects - one set for SIT, the other set for UAT.
    Object (Connections, Universes, Webi reports) names in Test server will be different from those in Development Server due to the existence of 2 sets of objects on the same server.
       a) For SIT: Universe A on Development server -> Universe SA on Test server
       b) For UAT: Universe A on development server -> Universe UA on Test server
    2) From Development server, to Training server.
       Same object names will be used in Training server.
       E.g. Universe A in Development server copied to Universe A in Training Server
    3) From Development server, to Production server
       Same object names used in Production server.
    From the above, there will be 4 rounds of deployment. Is Import Wizard sufficient? Or is LCM still the better option?
    Thanks in advance for your advice.
    Linda
    Edited by: Linda on Mar 27, 2009 3:36 AM

  • Migration of company code from one server to another

    Dear Sir/Madam,
    We are in the process of migrating company code from one server to another server. We have activated the company code with ewt in old server on 01.10.10. We have to migrate the same company w.e.f. 01.11.10 to new server.
    we have two options one is to migrate the company without ewt activation where we can take all the open items and trial balance and then activate ewt and do the required health check up in ewt.
    second option is to activate the ewt and then migrate , here the issue is that if open items are migrated after ewt activation the tds gets calculated again.
    In indian scenario we have to pay the tds (challan updation) by 7th of next month, if we migrate then this is not possible because in the new server we do not have the data in the table required for clearing the entries. We are thinking of doing the challan updation in the old server itself.
    Can you suggest us the option through which we can migrate the company code. If you have any other option then please suggest.
    Prashant P. Zinge

    Thanks

  • Issue in migrating analysis service job from one server to another

    Hi All,
    I'm migrating analysis services from one server to another, within the source server there is a job with the name
    denreportingprocess which executes a batch file within local drive on server. I have moved all the analysis services cubes from the source server to destination and all the databases on the source server have been restored to destination.Verified
    cubes are pointing to the correct database by modifying the connection string within the datasource part of the cube databases.
    I have copied the entire process folder from source to destination and edited the code within the run file and code within the job pointing the locations to new server.
    Below is the job code, it is running a batch file placed in E drive
    E:\MSSQL10_50.MSSQLSERVER\process\run.cmd
    Below is the text within the batch file (windows command script)
    E:\MSSQL10_50.MSSQLSERVER\process\ASCMD -S "servername" -i "E:\MSSQL10_50.MSSQLSERVER\process\Process.xmla"
    -o "E:\MSSQL10_50.MSSQLSERVER\process\Log.txt"
    Below are the list of files within the folder E:\MSSQL10_50.MSSQLSERVER\process
    ASCMD
    process.xmla
    Logs.txt
    run
    When I run the job it is failing with below error message
    Ascmd: Exception trying to impersonate user: Access to the path 'E:\MSSQL10_50.MSQLSERVER\process\log.txt' is denied.
    Ascmd: Execution failed: Access to the path 'E:\MSSQL10_50.MSQLSERVER\process\log.txt' is denied.
    Thanks in Advance.
    Regards, Kranthi

    Hi Visakh,
    Thanks for the reply, I have mapped the account under which the job was running to D drive, now it can access the file but job is still failing and error is not that informative.
    Below is the error message with which the job is failing, where can i find this output file with errors
    Executed as user abc_agent. C:\Windows\system32>E:\MSSQL10_50.MSSQLSERVER\process\ASCmd -S "servername" -i "E:\MSSQL10_50.MSSQLSERVER\process\process.xmla" -o "E:\MSSQL10_50.MSSQLSERVER\process\Log.txt"   Microsoft
    (R) Analysis Services 2008 Command Line Tool  Version 10.0.87.5 X86  Copyright (C) 2008 Microsoft Corporation.  All Rights Reserved.Ascmd: Check the output file for errors.  Process Exit Code 1.  The step failed.

  • Oracle db Migration from one server to another

    Can any body guide me why companies migrate Oracle db from one server to another , & what is the process for doing that?

    In that case, something has changed, right? The need to have a standby server has become important.
    Next steps:
    - define the real business requirements (why do we think we want to spend money on a spare server? why should the money go to a hardware company, instead of an increase in my salary? what benefit are they looking for?)
    - see whether any known ideas or alternatives fit the requirements, see whether the backup should be a standby server, a hot failover server, or some other backup mode;
    - go to the Oracle Technet site, look under the Product Centers: Database area to see whether there are any related topics (such as 'availability', as one of the logical reasons for a backup is to make the application more avaliable); check in that area for any white papers; read the white papers to formulate an idea, write down interesting keywords;
    - look in the Oracle docuentation, list of books, to see whether there are any books specifically dealing with that topic (such as Oracle Data Guard);
    - use Google to search for the combination of 'Oracle backup' and the interesting keyword and study several of the sites;
    - form a basic plan;
    - go to expert and trusted sources (these forums, OraFaq.com), post a plan and ask for feedback.
    There are literally dozens of alternatives. Research and find the one(s) that are right for your situation. That includes the technical as well as the financial reasons.
    More than anything, that means you need to learn to ask the right question. And that often means asking the same question several different ways, and attempting to answer each variation yourself to see how the answer solves your specific needs.

  • Best Way to Migrate an application from one server to another

    I couldn't seem to find the best way to this by Googling. If you have two instances of Sun Web Server 7, and you want to migrate a web application from one server to another, what is the best way to that?

    I am sorry. My question was poorly worded after some hours of frustration. What I am really trying to do is develop a base virtual machine snapshot with Sun Web Server Loaded and a base set of applications.
    When the need arises, I need to deploy another VM and start it up. There seems to be some issue with the host name of the VM and the administration server, or something. It is my impression that as longs as I have everything contained in one directory like /webserver, I should be able to copy everything to a new machine and start it up. I know I need the listeners listening on all ip addresses and the jdk being used would need to be in that directory as well. Is there anything I am missing here or that I need to watch out for?

  • Calendar server Migration from one server to another

    Dear folks,
    We are planing to move our calendar server from one server to another, Platform is same, OS is same, Calendar server on both systems are having similar version, Only pointing to new directory server but same schema level and populated with same users,
    What would be the best approach to accomplish this:
    1) Just take backup of Database & Restore it on the new server
    2) Run Migration utility .....
    ll appreciate for any help......
    Thanks

    Sp00ky_Geek wrote:
    We are planing to move our calendar server from one server to another, Platform is same, OS is same, Calendar server on both systems are having similar versionHow 'similar'? (showrev -p | grep ics)
    Only pointing to new directory server but same schema level and populated with same users,
    What would be the best approach to accomplish this:
    1) Just take backup of Database & Restore it on the new server
    2) Run Migration utility .....Which migration utility?
    If they are the same platform/version you should be able to copy the database across as-is. The users directory entries (icsdwphost) will need to be updated to reflect the new hostname for the calendar server.
    As with any move/migration, test and retest.
    Regards,
    Shane.

  • Hardware Migration from one server to another server

    Hi All,
    We require more information pertaining to hardware migration from one server to another server without changing OS & DB.
    We are preparing installation guideline document for the same.
    Has anybody came across similar scenario?.
    Any pointers on this will be highly appreciated.
    Regards
    Tushar Vhora

    usually you don't have to care too much about the tools used (r3ldctl = R3load control | r3szchk = R3 size checker | r3load = R3 Load), because you normally use r3setup/sapinst to fulfill the copy/migration. r3setup/sapinst will call the appropriate tools with the needed options...
    -> which release are we talking about?
    -> which os and which database do you use?
    -> how big is your source database?
    -> do you have any time issues while making the copy?
    GreetZ, AH

  • How to migrate html file (workspace homepage) from one server to another

    Hi,
    Does any one know how to move a html file that is attached as homepage for Workspace from one server to another server?
    When I try using Export option, I dont see this file to select.
    Thanks in advance,
    PM

    You can use LCM functionality.
    Thx

Maybe you are looking for