Process Notifications and Due dates

Hi All,
I am trying to add "Send Notification CO" to Due Date setting of a process. I am sending one pre-define email to process users.
Here I have no mapping of process parameters and Notification CO parameters. But I have set defaults to it.
When I am saving this change I am getting error saying Definition of selected object contains errors
I have tried executing notification CO standalone, its working fine.
Can anybody tell me what is going wrong here?
Thanks and regards,
Amey Mogare

The payroll process results window displays based on the time_period_id column in the pay_payroll_actions. Based on the Legislation Rule, the Processes which populate run results (Quickpay, Payroll Run etc.,) will have correct time_period_id populated. So for these actions, the time_period_id is populated based on date_earned ( If the Legislation Rule is set). They control only for these actions as this will effect the PTD Balances and Latest Balances.
PYUGEN populates the time_period_id for Other Payroll processes based on the effective_date (i.e. the period in which the end date value falls). They dont control for these actions as the time_period_id here does not have effect on Latest balances etc.,
This is the reason, you see different Period Number for processes such as Prepayments, Costing and Archiver incase of Offset Payrolls.

Similar Messages

  • FIX: Change your Billing Cycle and Due Date!

    There are many people angry about the change in billing due dates that have been set by AT&T recently.  There is a way to get your due date back to where you want it but does require a little work on your part. NOTE: I am not an AT&T Employee, this is just advice from someone doing a little research! How the change works:First you will need to contact AT&T customer support (as this is just a customer to customer support forum so nobody here can make changes to your account). Let them know you want to change your billing cycle and due date. First month - you must complete your current billing cycleSecond month - you will have a prorated "short" cycle anywhere from 0-29 daysThird month - you will start with the billing cycle on the new date you select. There are a couple of other requirements below just so you are completely informed when talking to AT&T support. 
    Billing Cycle Change Requirements:
    Changing your billing cycle is NOT an option in all service areas so contact support at 800-331-0500 to find out if this option is available in your service area.
    Your billing cycle cannot be changed during the five days before or after the close of your current cycle. Your billing cycle cannot be changed if your account is in a delinquent status, or if the account will fall delinquent before the requested change date. If you have a payment arrangement set up, the payment arrangement must be made before the billing cycle is changed. If you have Autopay, you may see two Autopay drafts in one month due to the billing cycle change. Please keep in mind that when a billing cycle is changed you will see prorated charges to get all of the billing back on track with the new dates. Understanding that this does create an inconvenience for many people for the first 2 months you will be where you need to be after and back on track.  If anyone has anything to add please do so and I will update my post. 

    Hi there
    This is a great guide that will be very helpful to any of our customers who wish to change their bill cycle dates! I’d just like to thank you for posting this and add some further expectations.
    The balance on the prorated second invoice shows as Past Due on the customer's third invoice, even if it is not. The cycle change process does not impact their account status and corrects itself on subsequent bills. With regards to prorated charges, the customer is provided a video bill with their next statement to help explain the charges.
    Thanks!
    Charise

  • Query on fetching the no.of days between Invoice date and due date in rtf template embedded BI Publisher Report

    Hi Experts,
    We have a requirement to fetch the value of 'No of days' between Invoice date and due date (Two variable date fields on the template) in an Analysis.
    Please let me know the procedure of how to achieve the same.
    Regards,
    Rev

    it's good for ideas but implementation a bit different
    Oracle Business Intelligence Publisher Report Designer's Guide
    This function provides a method to get the difference between two dates in the given locale. The dates need to be in "yyyy-MM-dd" format. This function supports only the Gregorian calendar. The syntax is as follows:
    <?xdoxslt:date_diff(‘format’, ‘YYYY-MM-DD’, ‘YYYY-MM-DD’, $_XDOLOCALE, $_XDOTIMEZONE)?>
    where
    format is the time value for which the difference is to be calculated
    Example:
    <?xdoxslt:date_diff(‘d’, ‘2006-04-08’, ‘2006-04-01’, $_XDOLOCALE, ‘America/Los_Angeles’)?>
    returns
    -7

  • Payment terms and Due date field gets emptied after residual clearing

    Hi
    There is advance of Rs.50000 in Vendor ledger and Invoice of Rs.200000 (with payment term - G019)
    I cleared these two line items (residual clearing). One new line item got created of Rs.150000. When i saw that line item, i saw that there payment term field and due date field got emptied. My requirement is that the original payment term entered in initial invoice document (of Rs.200000) should automatically get populated in new line item of Rs.150000.
    How to fulfill this requirement?

    Thanks for the prompt reply.
    I wanted to ask one more thing. Same way when i do partial clearing (not residual), is it possible to populate the invoice's due date in advance line item. One link is that my invoice reference gets populated advance line item. So i want due date (not payment term) also to get populated in advance line item.
    Please help.
    Edited by: Deepak Agrawal on Jul 29, 2011 11:43 AM

  • Posting Date, Document Date and Due Date as same

    Hi All
    I would like to make Posing date , Document Date and Due date as same
    The movement i enter Posting date it should automatically carry the same value to Due date and Document date field . How can i make it
    Regards
    Rashid

    Dear Gordon
    Thanks, it is working for Marketing documents,
    I would like to have the same for JE and JV
    Regards
    Rashid

  • Process Notification and Notification Wait activity - External Relationship

    Hi,
    I have a query relating to the Process Notification and Notification Wait activity.
    In my Process Creation after finishing 2 interactive avtivities I need to send notification or inform the instance
    waiting in a Notification Wait activity.
    For this Im using ALBPM Predefined Process Notification activity to send Notification.
    Im defining instance variable and mapping it as argument to Notification Wait activity.
    I have set the type of event to wait for as External relationship.And defined a correlarion
    at Notification Wait activity by setting initiate property as Yes and defined association with
    argument mapping.And selected the same correlation from the Process Notification activity.
    When im trying to execute the same always im getting the exceeption as Instance was not found for notification.
    Please help me to resolve this issue.
    Thank You,
    ~Kavitha

    Hi Matthias,
    What you have experienced is exactly how it works, the notification is processed after the screenflow is finished.
    I tested a lot some time ago and also really happy that worked well.
    Regards

  • Quickest method - Plant and due date to o/s PO and SA items

    Due to volumes, performance is an issue for a Z report. Ideas on quickest method to get to outstanding PO items and SA Delivery Schedule items due on given dates for a single Plant. There are other search criteria but I don't believe these will be tightly specified and Plant and due date (at EKET or EKES level, as applicable) are the prime ones.
    Thanks,
    Nick
    Moderator message: please do not cross-post, one thread only per problem.
    Edited by: Thomas Zloch on Jun 9, 2011 11:02 AM

    OK. I've found a solution... which works if a customer never indicates different delivery dates on a same Sale Order.
    As you can see in the system information view, the field described as "Del. date" in the Sale Order lines is named <b>ShipDate</b> !
    So I simply use a FormatedSearch to change its content according to the Sale Order Document Due Date and the customer location.

  • Quick method - Plant and due date to outstanding PO / SA DS items

    Due to volumes, performance is an issue for a Z report.  Ideas on quickest method to get to outstanding PO items and SA Delivery Schedule items due on given dates for a single Plant.  There are other search criteria but I don't believe these will be tightly specified and Plant and due date (at EKET or EKES level, as applicable) are the prime ones.
    Thanks,
    Nick

    Hi Veera,
    I am using XI 3.0 TO SRM 5.0.
    If you would like to ask me anything more please do.
    Waiting for your reply.

  • Human task notification after due date/expiration date/...

    I would like to set a due date (or expiration date) to Human task, and set some notification before this time. Ok, it seemed very easy:
    - i set due date to 5 minutes in human task -> Deadlines
    - i set notifications in human task -> notification and in tab Advanced i set remind once 2 minutes before due date
    Nothing happens. Exactly same (nothing) happens when i do the same with expiration date.
    But what exactly is meaned under word "Reminder"?
    It's mail? (then where I have to set email adress? I tried to set a "to" field in human task -> notification -> tab Advanced -> notif. header attributes => nothing happened)
    It's worklist inbox message?
    Or what ist "reminder" and how it should remind me?
    Edited by: user1175491 on Dec 28, 2010 7:21 PM

    Hi,
    I don’t know if you’ve managed to resolve this issue yet and you mention you have emails working from BPEL, but I'm not sure if you've got any notifications working for the Human Task, if not then I have done some work with the human task notifications and although I’ve not tried to do what you’re doing, this is what I have learned.
    Firstly to receive any notifications you need to configure the Messaging Driver and Workflow Notification Properties…
    In Enterprise Manager expand [farm] -> SOA -> soa-infra
    Right click soa-infra and choose SOA Administration -> Workflow Notification Properties
    Underneath the page title (Workflow Notification Properties) is a note telling you to configure the Messaging Service Driver. Click the "Go to the Messaging Driver page" link.
    In the associated drivers section you will have a single entry for soa_server1 (or what ever it's called for you). In the right hand column there is a button for configuring the driver, click this.
    In the driver specific configuration, scroll down to OutgoingMailServer and enter the hostname or IP address of your mail server, then click Apply at the top of the screen.
    Now go back to the Workflow Notification Properties screen and choose “Email” from the notification Mode and enter some sensible email addresses in the Notification Service section. It’s useful to have real email addresses in here at the moment because any failures will be returned to this address.
    You now need to restart Weblogic for these changes to take affect.
    After the restart you can test the notifications by doing the following
    Back in Enterprise Manager expand [farm] -> SOA -> soa-infra
    Right click soa-infra and choose Service Engines -> Human Workflow
    Click on the Notification Management tab.
    You can click the "Sent Test Notification" button to make sure everything is working ok. This screen also allows you to monitor notifications for failures.
    Now that the notifications have been set up you can configure who gets notified on which events against your human task in JDeveloper.
    The email addresses for the users are retrieved from your identify provider for the relevant user, by default this is the internal LDAP directory. I’m not using this, so I’m not sure exactly how this will work. There are options in the worklist application for individual users, but I’m not using this either.
    Now that this is set up you can configure the human task within JDeveloper. On the notification tab you can decide who gets notified when. By default when a task is assigned to a user, the assignees are notified, you can play about with these settings to see what works best for you. Have a look at http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10224/bp_workflow.htm#BABBHDGF for more information.
    I’m not sure I’ve solved your problem, but I hope this at least helps.

  • Ageing Report on posting date and due date

    Hi
    I want to get customer ageing report on the basis of posting date (bill date) as well as due date (30days after posting date).
    Please let me know how to get two reports.

    Hi,
       check with this reports.
       s_alr_87012178 and s_alr_87012168
    regards,
    Radhika.

  • Dunning wizard and due date

    Hello
    We experience something wrong after running the dunning wizard : all invoices with a due date before 31st of October are not shown...
    Does anyone know how this can be corrected ? Is it due to the new year and different account period ?
    Thank you

    Hi,
    What is your financial year setting?
    Thanks,
    Gordon

  • Post date and due date

    Hi all,
    can any  tell me what you mean by 'posting date' and 'net due date' and' clearing date'?
    what is the difference between them?
    Table is-BSID
    BUDAT-posting date
    ZFBDT-Baseline date for due date calculation
    AUGDT-clearing date.
    thank u
    sunny.

    BUDAT-posting date
    -> to determine the book-period (bkpf-monat)
    ZFBDT-Baseline date for due date calculation
    -> determine date when an obligation becomes due
    due date = zfbdt + bsik-zbd1t (or ZBD2t or ZBD3t)
    AUGDT-clearing date
    -> date when open-item becomes a cleared item
    by payment or reversal or...
    A.

  • Look for 'Purchase Order' and 'Due date' Tables

    Hi Everyone,
    iam creating a Form for an automatic payment and i have some difficulties to find the table of these fields :
    - Purchase Order (EBELN)
    - Due date (NETDT)
    Please can u help me?
    Regards.

    I hope you checked these tables.
    I found these on Where-used for your NETDT field, Alos these tables have field BELNR which might intrests you.
      Table Fields                     Short descriptn
      BWPOS                            Valuations for Open Items
      FAEDT                            Due Date for Net Payment
      DKKOP                            Balance Audit Trail
      NETDT                            Due Date for Net Payment
      DKOKP                            Open Item Account Balance Audit Trail
      NETDT                            Due Date for Net Payment
      DSKOP                            Balance Audit Trail
      NETDT                            Due Date for Net Payment
      MHND                             Dunning Data
      FAEDT                            Due Date for Net Payment
    good luck,
    ags.

  • Payment term configuration with installment and due date

    Hi,
      I have one requirement,  one paymne term we have as 40 % advance and 60 % after 45 Days,  in description it is as mention,  when we do the MIRO one accounting etry is generated in system we can check in FBL1N,  now as only one entry is created  and the due days are as we maintain in No. of days  so according to that the due date is calculated  but the requirement is system should show two due date  as 40 we have to pay advance  so for that for 40 paymne tamount is should so one due date  and for remianing amount it should show different due date, How to configure this.
    regards,
      zafar

    Hi,
      Can you help on this issue.
    regards,
    zafar

  • Special G/L indicator and due date

    Dear all,
    In FB01 when I post on customer account with special GL indicator, in the next screen the "due date" field is mandatory.
    I would like to fill this field automatically. I tried via substitution, but it doesn't seem to work with "due date".
    Do you have any suggestions please?
    Many thanks,
    Becky

    Hello,
    Please note that the due date field is as per standard design as per the SAP note 95079.
    Field BSEG-ZFBDT is hardcoded in most FI screens to be mandatory and cannot be influenced by any field status changes. This situation only valid when posting with special G/L indicator (downpayment).
    The reason behind this is that this special GL screen and the data entered here are very important to many other programs. This data affects liabilities and receivables where due date is necessary almost everytime.
    Could you try the following :
    - Change in SE51 the requirement condition (field attribute). However, this would be deemed as a modification to the standard
       system. You may be responsible for any negative consequences once decided to make such modification.
    - You can also try Use a substitution rule (like: if special GL = A and user = ...   and account = ... and.... then BSEG-ZFBDT = today). I am surprised to know that this doesn't work for you. Are you getting any error message while subsititution is triggered?
    Thanks for your cooperation and understanding.
    Best regards,
    Suresh Jayanthi.

Maybe you are looking for