Process to consume a WSDL file in ABAP without using XI

Hi all,
I want to know if we can consume a WSDL file in ABAP without using XI?
I have developed a lot of web services and gave WSDL file to respective teams.
Now i need to consume a WSDL file in ABAP and i dont know how to do it.For creating a web service i use the web service wizard in SE37.
Now i need to consume a WSDL file in ABAP . The WSDL file is from a third party organization. how can i consume a WSDL file in ABAP without using XI. What is the process to consume a WSDL file in ABAP without using XI
Please help me with process and some sample code to consume a WSDL file in ABAP without using XI
Regards,
Jessica Sam.

Depending on your release the process is a little bit different. 
For NW 2004, see these instructions.
http://help.sap.com/saphelp_NW04/helpdata/en/bf/d005244e9d1d4d92b2fe7935556b4c/frameset.htm
For NW 7.0 see these instructions, in NW 7.0, you will, use the SOAMANAGER transaction  to configure logical ports and other stuff, this replaces transaction WSADMIN and LPCONFIG.
http://help.sap.com/saphelp_nw70/helpdata/EN/bf/d005244e9d1d4d92b2fe7935556b4c/frameset.htm
Regards,
Rich Heilman

Similar Messages

  • Can we create Interactive forms only with ABAP & without using GP,  or Java

    Hi,
    I would like to know if we can create Interactive forms only with ABAP & without using GP or Java. We want to develop an offline solution using Interactive forms, but would like to use only ABAP for creating the forms. All the documents so far either refer to creating the forms, in reference to / in sync with: ISR (Service Requests), GP (General Procedures) or Java. Can this be done with ABAP alone?
    Regards,
    Ramesh
    Edited by: Ramesh Nallabelli on Apr 16, 2008 12:02 AM

    Hello Ramesh,
    You should be able to create Adobe Interactive Forms using only the ABAP stack (without GP, Java, etc). Please refer to the thread below. Hope it helps.
    Re: help for-offline interactive forms based on sending receiving mails in ABAP
    Regards,
    Rao

  • How to Consume a WSDL file in Webdynpro JAVA Application 7.30

    Hi Experts,
    My requirement is,I have a wsdl file(Provided by the SAP PI) which i need to consume in Webdynpro Java 7.3(NWDS 7.30).
    I has been tried in the follwing way
    1.First click on the Model --> Adaptive Web Service Model -->Model Name--Package Name
    2.Choose Remote Location/File System.
    3.After that choose the WSDL file from my project which i added earlier.
    4.After that I get the node in the context menu.But I am uneble to set some data into the node and also uneble to get data data from the node
    After deploying my project I get the following error.
    Error ::
    The initial exception that caused the request to fail, was:
    com.sap.esi.esp.service.server.query.discovery.ExtendedServiceException: Configuration not found for service reference with ID: c73e38ff-a4d8-4e4c-89c2-827fd5cf17ac from application demo.sap.com/mwebsrvc. Either you have not assigned the Service Group to a Provider System or the generation of the configuration has failed. Check the configuration details from SAP NetWeaver Administrator -> Application Communication. --> Details about the Service Reference: {urn://TestSOAPtoRFCSender}SI_TestSOAPtoRFCSender_OB; Service Group: com.tsecl.SITestSOAPtoRFCSender_OB.pidev_nerapdrp_gov_in; Service Group Software Component: demo.sap.com/mwebsrvc; Service Group Application: demo.sap.com/mwebsrvc; Configuration state: Not configured
        at com.sap.esi.esp.service.server.dynamic.DIIServiceRefConfigContextImpl.prepareContext(DIIServiceRefConfigContextImpl.java:275)
        at com.sap.esi.esp.service.server.dynamic.DIIServiceRefConfigContextImpl.<init>(DIIServiceRefConfigContextImpl.java:59)
        at com.sap.esi.esp.service.server.dynamic.DIIContextCreatorImpl.createDIIServiceRefConfigContext(DIIContextCreatorImpl.java:18)
        at com.sap.engine.services.webservices.espbase.client.dynamic.configuration.DIIContextFactory.createDIIConfigurationsContext(DIIContextFactory.java:12)
        at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService_NewInstance(GenericServiceFactory.java:368)
        ... 67 more
    Please help me about this.
    Thanks and Regards,
    Amit Basak

    Hi Amit,
    Create provider system in NWA -> SOA management -> System Connections. After ping is successful go to NWA -> Application Communication and select your DC and assign the provide system for your service configuration group.
    I hope it will works fine as we also did the same.
    - Pradeep

  • Error while consuming external WSDL file

    Hi,
    I have created the client proxy for the WSDL file(i.e. .Net webservice's WSDL file). While creating the logical port it is giving the error,
    'Error: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL '. Please help to solve this problem.

    Hi,
    Thanks. I checked with program you have given, while executing it is displaing the WSDL file as inconsisten value as follows,
    <sidl:DEFINITION xmlns:sidl="http://xml.sap.com/2006/08/esi/sidl/dump">
      <sidl:consistencyCheck>Incorrect value:</sidl:consistencyCheck>
    - <sidl:registry assigned="true">
    - <sidl:entityContainer>
    - <sidl:documentNamespace namespace="http://schemas.xmlsoap.org/wsdl/">
      <sidl:entity targetNamespace="http://tempuri.org/" location="http://tedweb2k3.wipro.com/PublishCopy/TTWis/tt.asmx?wsdl" />
      </sidl:documentNamespace>
    - <sidl:documentNamespace namespace="http://www.w3.org/2001/XMLSchema">
      <sidl:entity targetNamespace="http://www.w3.org/2001/XMLSchema" location="" />
      <sidl:entity targetNamespace="http://tempuri.org/" location="" />
      </sidl:documentNamespace>
      </sidl:entityContainer>
      </sidl:registry>
    Please help me in this regard.

  • File-To-RFC without using BPM

    hey guys
    is a File-To-RFC scenario possible without using BPM? i have gone through the blog by Arpit Seth ( /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit ) but it uses BPM.
    i am new to XI and not very comfortable with BPM.
    please let me know if BPM is the only way out or are there some other methods too.
    Also under what circumstances one should use BPM?
    thanx in advance.
    aamir suhail

    Hi,
    it's a standard non BPM scenario
    (you can find many weblogs like this)
    the only different thing is the RFC signature import
    (inside repository)
    and the use of different channels (file and RFC)
    you can find many examples in my XI FAQ
    (document section)
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Consuming a WSDL [ Webservice ] in ABAP

    HI All
    My requirement is , i need to consume web service in ABAP, i have tried some links but couldn't able to figure out the actual procedure of consuming the service, so can anyone provide me with all steps in consuming a web service
    Thanks
    Chaitanya.A

    You need to create an Enterprise proxy for your web service. This will be a generated ABAP class that will act as the web service consumer. You can create proxies from se80 itself, Create->Enterprise Proxy->Service Consumer. Then call the class methods normally as you call any ABAP code. The class will be a wrapper for the actual web service.
    Regards,
    Nithya

  • Map attributes of XML file to ABAP table, using a XSLT program

    Hi dear Gurus.
    I have to transfer the information from the XML's element attributes to abap internal tables and store that information.
    Somebody has a clear sample to do this data transfer.
    I found a clas iXML, do you have a sample to read the elements and attributes using this class?
    Thanks in advance.
    Regards.

    hello ,
    search for BCCIIXM* in se38.
    regards
    Prabhu

  • Send attachment via Receiver FILE/JMS adapter without using any Mapping.

    Hi,
    R/3 program creates one (encoded) text file, which I want to send via Proxy to JMS adapter without any mapping or FCC.
    Note: I don't want to use File adapter to pick the file from R3 dir and then send it to JMS.
    Reference: I have gone through below mentioned blog which produces the attachment in the XI payload but I am not able to write the same attachment to my XI dir using Receiver File adapter (File adapter is just for testing actual adapter will be used as Receiver JMS adapter).
    /people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
    Regards,
    Sarvesh

    > note sure why you want to complicate things here
    Actually the idea was to explore the possibilities of "Proxy with attachment". And I also wanted to confirm with experts like you before going to other options. Anyway it seems it's only possible with mail adapter.
    Reason for exploring above possibility: Since ABAP team has to create one text file and encode it, so we thought to call the outbound proxy in the ABAP program to send the same file as an attachment and then simply send it to JMS. Which is quite obvious thinking when you don't want to manage a share directory between R3 & XI or don't want to manage FTP user and pwd.
    > i think the simplest thing is to go for a simple file to jms configuration unless you have any specific reasons for not doing so.
    This we already kept in our mind as a last option in case if above thing is not possible then we can easily do it by this way.
    Thanks a lot for suggestion.
    Regards,
    Sarvesh

  • Printing lists in ABAP without using the standard button

    Dear community,
    i've got a little problem and I can't fix it on my own.
    Some user in our company gave me the instruction to extend an existing SAP Programmm with some defined functionalities.
    They want to implement an new button for printing in the gui status and when someone uses the buttons they want to count down a number and print the generated list of the report.
    I created also the new button in the gui status with a own functioncode and in the report i implemented an own AT USER-Command event:
    **&   Event
    AT USER-Command.
      CASE sy-ucomm.
        WHEN 'PRVR'.
          CALL FUNCTION 'PRINT_REPORT'
            EXPORTING
              report = sy-cprog
           EXCEPTIONS
             OTHERS = 99.
    When I push my own print button th reports jumps in the At-user-command event.
    The window for chosing the print properties will appear immediatly and I cn start printing.
    But only the spool-order will only appear when I leave the list-view with the button "back", "exit", or "cancel".
    Has anyone an idea why the output appears only when I go back to the selection screen?
    Can anybody tell me how to create an printing function to print out the list of an abap-report? I don't wnt to use the normal print-button!
    Many thanks in advance.
    Michael

    Hi Michael,
    sy-lsind is the list-id. If you set it to 0 or 1 it jumps (when using BACK)
    to the first output-list.
    Here a short demo-code to understand it.
    Make severeal time doubleclick in the outputline and
    look at the changing output.
    try it with:
    sy-lsind = 1
    and
    sy-lsind = 1.
    REPORT ZGRO_TEST1.
    data: dc type i value 1.
    START-OF-SELECTION.
      WRITE: / 'List:', dc, 'SY-LSIND:', SY-LSIND.
      HIDE:    SY-LSIND.
    AT LINE-SELECTION.
      dc = dc + 1.
    sy-lsind = 1.
      WRITE: / 'List:', dc, 'SY-LSIND:', SY-LSIND.
      HIDE:    SY-LSIND.
    Hope it helps.
    Regards, Dieter

  • How can I export an .PLT file from Illustrator without using any other software but Illustrator

    I'm in the URGENT need of exporting a file to .PLT and no using any other software like the producer's software.

    You can't. AI doesn't produce .PLT files.

  • View XML files in Firefox without using source view

    Whenever I open an XML file in Firefox, the tags are all stripped off and I see just plain text like this [[http://i.imgur.com/pBhUM.png|XML File 1 in Firefox]]. The same file displays in Internet Explorer like this [[http://i.imgur.com/CT8Zb.png|XML File 1 in Internet Explorer]]
    For an average user, this is the preferred view, as he can see the text content of the XML file without worrying about the tags in the document. For other more advanced users like myself, this is very inconvenient.
    There are even some cases where Firefox does not display anything because all the tags are stripped off like in this case
    [[http://i.imgur.com/hAkBd.png|XML File 2 in Firefox]]
    here is the same file in Internet Explorer [[http://i.imgur.com/juOzs.png|XML File 2 in Internet Explorer]].
    The workaround I use now is to view the file's source so that I get to see everything. I must say, however, that this is very inconvenient. If the user does not specify any style sheet for formatting the XML file, I believe the file should be left as-is; it should not be touched.
    Kindly review this so we can confidently use Firefox as our default browser without having to switch to IE from time to time.

    '''@cor-el'''
    I am aware of the solution you're proposing. I even stated it as the workaround I use currently.
    My point is that the browser should have an option to display the raw XML without stripping off all the tags just like Internet Explorer or even Chrome (see attached image).

  • Can I load xml file from SWC without using @embed

    I'm developing a mobile application in which I need to load xml files from File.applicationDirectory. This works great if the xml files are part of the main application swf. But I would like to move these xml files into a SWC so they could be shared across multiple applications.
    Using FlashBuilder 4.5, when a SWC is built, I can specify files to embed in the library that are not assets (Assets Tab of Flex Library Build Path). For various design reasons, I do NOT want to embed the xml files via @embed.
    When the swc is built and I open it up using a zip utility, I see the xml files in there just fine. So they are being bundled with the SWC. But how can I load these files in my main application that does not involve using @embed? When the main application is built, the swc setting for link type is "merged into code".
    I wouldn't expect the application to automatically pull out the xml files from the swc and place them in the File.applicationDirectory on the mobile device. I've tried loading from there just in case but file.exists is false (as expected).
    I've searched the web (and continue to do so) and all the answers seem to be to use @embed. Is there another way?
    Randy

    It's actually a lot easier than you think.
    Just reference the file like any'ol URL using a path relative to the SWC's src directory.
    So if you include the file "assets/xml/some.xml", just use that same string like you would any remote resource.
    For example:
    var loader:URLLoader = new URLLoader( new URLRequest("assets/xml/some.xml"));
    I believe it would also work like this "/assets/xml/some.xml", but I prefer relative paths so the link doesnt break if moved out of the SWC...

  • How to copy Video files to iPod without using iTunes???

    Hi there ..
    I have the latest iPod Video 80GB.
    If I copy video files larger than 640 pixels iTunes stops me.
    But, I don't trust apple folks.
    In the previous iPod it didn't matter the width unless you had a total number of pixels inferior to 480x480 (Mpeg4)
    Now iPod 5.5G says 640x480=307200 pixels is the max.
    If I have a 736x416=306176
    But iTunes doesn't let me copy such files into the iPod.
    I WANT TO check if at Apple just don;t want me to have such files copied or if the iPod itself can't play them for real!!!!!
    SO Anyone knows of an utility or a way to just copy such files to the iPod so that the database is refreshed and I can test them???
    thank you.

    Help Help .... !!!

  • Remove files from USB without using trash

    This is actually a tip which after searching the internet I never found and devised the method for myself. I thought finding a place for it for future reference would be helpful.
    Problem: Delete files from a removable drive (USB, etc.) and free the space without emptying the system trash.
    My method: Move the files in Finder (not copy) off the drive in question to the internal HDD of the computer (pick or create a temporary folder for simplicity) using CMD-drag. You will notice when you press CMD after beginning to drag the files in finder that the "plus" sign will disappear.
    Once you have moved the files the space they occupied on the removable drive will be freed. You may then delete them from the temporary folder as you wish.

    If there's an app that plays .avi's, it may have file sharing
    beyond that, no idea. Because you have to get it onto the iPad and into the video app.
    I can't recall, if the video app will play avi's, then you can use the camera connection kit and if you follow the correct naming convention, you can import the files onto the ipad, watch them, then delete.
    Files with names of exactly 8 characters, located in a folder named DCIM (you're fooling the camera connection kit to think your videos are from a camera.)

  • I own a print company have room of puters and a older server- i want my mac and pc people to access files from anywhere without using an aftermarket program

    can I get this 5 license server - 2012, and me from home or road or artist from home or road got to an ip addy and have access to our 1.2 tb of customer files to edit after hours or fix or pull for meeting, do I need a real servr or can u use a computer
    with 1tb had drive and a 2tb plug in dive to access files from anywhere on mac or pc and network all y shop and pull files from anywhere so I don't need a wlan but have an all time go to place to get files-- it will be on 24/7 with battery backup- I need to
    get up to date and tonite had to drive to work to pull a file I could have I think gotten with this software-- can anyone help or explain am I getting right thing and will it work its 3 am and I am just back from work, I could have been done at 9 if I have
    a server access--THANKS IS ADVANCE--TECH LEVEL- COMPARED TO YOU GUYS A 1- IN GENERAL A 3-4
    THANKS

    Hi,
    I'm not very clear about the exact requirement.
    I assume you would like to:
    1. Able to access a share in company from anywhere.
    2. Above to use a server from anywhere.
    3. Above to use a server in your company from anywhere.
    If I'm correct, the solution is Could products or Remote Desktop Service with VPN.
    Please refer to Windows Azure to see if a cloud server could help in this situation.
    http://azure.microsoft.com/
    Also you can use OneDrive to store files on cloud side and you can access it from anywhere.
    And for VPN please refer to this article:
    Configure a Remote Access VPN Server
    http://technet.microsoft.com/en-us/library/cc725734(v=ws.10).aspx
    Let us know the one you prefer and we could discuss it more. 
    If you have any feedback on our support, please send to [email protected]

Maybe you are looking for