Processing some records from internal table.

Hi,
My internal table contains material in lakhs.After fetching the record from database table MARA,i process each material to find out its characteristics.As there are too much records it is taking time, resulting in time out error abap dump. If i want to process first 5000 material then remaining 5000 and so on...what logic should i apply?or can there be any alternative solution?

Hi,
You can also check if the read statement has BInary Serach.
By Adding this it will improve performance.
Read statement will occupy lots of time to read the records.
Sort the Internal table with some key field and the use Binary Search for an internal table.
Ex :
SORT T_PRGEN by ATTR20A.
READ TABLE T_V_TCAV201 INTO WA_V_TCAV201 WITH KEY ATTRV20 = WA_PRGEN-ATTR20A BINARY SEARCH.
This should fix the issue.
Regards,
Kittu

Similar Messages

How to update Records from Internal table to u2018Zu2019 table?

Hi Friends,
How to update Records from Internal table to u2018Zu2019 table.
I have records in Internal table , that records want to update on u2018Zmarau2019 Table.
( my internal table & u2018 Zu2019 table structures are same.)
Thanking you.
Regards,
Subash

Hi,
loop at internal table.
modify <Z- table > from values < internal table Workarea>.
if sy-subrc = 0.
COMMIT work.
else.
ROLLBACK waork.
endif.
endloop.
or
UPDATE <Z- table > from table < internal table Workarea>.
if sy-subrc = 0.
COMMIT work.
else.
ROLLBACK waork.
endif.
Prabhudas

Inserting records from internal table to database table

Hi all,
i want to insert records from internal table to zDatabase table, can u plz guide me which statement is better in performance to insert the records.
1) insert one by one record from internal table
loop at itab.
insert ztable from wa.
endloop.
2) insert total records at a time
INSERT <dbtabname> CLIENT SPECIFIED FROM TABLE itab.
or let me know if any other statement is there with high performance.
i internal table contains nearly 40000 records.
thanks.

Hi,
Insert the entire table at atime rather than a record so as to increase the performance.
you can use INSERT <dbtabname> CLIENT SPECIFIED FROM TABLE itab.
or
MODIFY ZPRODUCT FROM TABLE GI_AFPO.
Regards,
Raj.

To delete duplicate records from internal table

hi friends,
i have to delete records from internal table based on following criterion.
total fields are 7.
out of which if 4 fields are same and 5th field is different,then both records must be deleted.
in case all five fields are same,the program should do nothing.
for example.
if there are 3 records as follows
a1 b1 c1 d1 e1 f g
a1 b1 c1 d1 e2 w r
a1 b1 c1 d1 e1 j l
then first two records should be deleted as four fields are same but fifth(e) field differs.
but third record should remain as it is evenif first five fields are same for first and third record.
values of last two fields need not to be consider for deleting the records.

LOOP AT ITAB.
V_FILED5 = ITAB-F5. "to compare later
V_TABIX = SY-TABIX. "used to delete if condition not matches
READ TABLE ITAB WITH KEY F1 = ITAB-F1
 F2 = ITAB-F2
 F3 = ITAB-F3
 F4 = ITAB-F4.
IF SY-SUBRC = 0.
 IF ITAB-F5 <> V_FIELD5.
*--both the records to be deleted,as Field5 is different.
 DELETE ITAB INDEX SY-TABIX. "deletes that record
 DELETE ITAB INDEX V_TABIX. "deletes the current record
 ENDIF.
ENDIF.
ENDLOOP.
Message was edited by: Srikanth Kidambi
added comments
Message was edited by: Srikanth Kidambi

To get recent timestamp records from internal table

hi all,
i have one requirment
i'm storing error messages in one table while creating a sales order basing on timestamp
which is of this format yyyy-mm-dd hh:mm:ss (random Number)
if i want to see the error messages left i'm getting all the error messages displayed
for example i have created a sales order
i got 10 errors displayed
i have rectified 5 errors ... if i again display error messages the 10 errors + the 5 errors is getting displayed
i want to display the 5 error messages only not the previous messages from internal table
basing on timestamp current one has to displayed remaining has to deleted from internal table.

I thought we used Sales Order Incompletion process for this.... but, if you're recreating the errors list every time you save with a create or change transaction then, at save, delete all rows in your error table for this document. Then get your errors and update your db table from your current errors table. From this viewpoint, the timestamp is not relevant.

Delete records from internal table

hi all,
i want to delete records from intenal table which are starting with a particular starting number .
eg internal table
10000
20000
90000
91000
92000
88880
i want delete the records starting with 9 i.e. 90000 91000 92000.
Thanks in Adv
RAJ

You can test this piece of code.
DATA:
i_tab TYPE STANDARD TABLE OF mara,
wa_tab TYPE mara.
wa_tab-matnr = '1000'.
APPEND wa_tab TO i_tab.
CLEAR wa_tab.
wa_tab-matnr = '1001'.
APPEND wa_tab TO i_tab.
CLEAR wa_tab.
wa_tab-matnr = '1002'.
APPEND wa_tab TO i_tab.
CLEAR wa_tab.
wa_tab-matnr = '1003'.
APPEND wa_tab TO i_tab.
CLEAR wa_tab.
wa_tab-matnr = '2001'.
APPEND wa_tab TO i_tab.
CLEAR wa_tab.
wa_tab-matnr = '3001'.
APPEND wa_tab TO i_tab.
CLEAR wa_tab.
wa_tab-matnr = '4010'.
APPEND wa_tab TO i_tab.
CLEAR wa_tab.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Aug 8, 2008 4:49 PM

Delete records from internal table using another internal table

HI,
I have two internal tables itab1 and itab2 which have same records initially.Later some records of itab2 are deleted .Then i want to delete those records from itab1 also ie,those records not found in itab2 .Is there any method other than looping.
So that itab1 again becomes equal to itab2.
Thanks in advance.
Sowmya.

Soumya,
Itab1 , Itab2 .
Before deleting the records from itab2 move those records to one more internal table itab3.
Now you have deleted records of itab2 in itab3.
SORT ITAB3,ITAB1 by your main key field.
LOOP AT itab3.
READ TABLE ITAB1 WITH KEY key field = itab3-
keyfield.
IF sy-subrc EQ 0.
DELETE itab1 where keyfield eq itab3-keyfield.
ENDIF.
ENDLOOP.

Help on to Filter records from internal table

Hi,
Here is my Internal table and need to filter the records based on some condition.
          OBJID | ENDDA | MC_SHORT   | MC_STEXT
    1   20000027|20061231|20000027    |WIT-SP
    2   20000027|99991230|20000027    |WIT-SP
    3   20000027|20051131|20000027    |WIT-SP
    4   20000033|20070131|20000033    |WIT-SP-BC
    5   20000033|99990931|20000027    |WIT-SP
    6   20000034|20061231|20000034    |WIT-SP-SA
    7   20000035|20061231|20000035    |WIT-SP-Q
    8   20000036|20070131|20000036    |WIT-SP-E
    9   20000036|99991231|20000027    |WIT-SP
This is my internal table data. Now i need to delete the records for each OBJID where ENDDA(Date field) is not eaual to the year 9999. And also if there is no OBJID with year as 9999 then need to keep the reocrd for further processing.Here in this case i should not delete that record.
Please help me out in writing the logic for the same.
Regards
Ramesh

hi Ram
its very simple please check this code
DATA : BEGIN OF itab OCCURS 0,
          objid TYPE i,
          endda TYPE d,
       END OF itab.
itab-objid = 1.itab-endda = sy-datum.
APPEND itab.
itab-objid = 2.itab-endda = sy-datum.
APPEND itab.
itab-objid = 3.itab-endda = sy-datum.
APPEND itab.
itab-objid = 0.itab-endda = sy-datum.
APPEND itab.
itab-objid = 4.itab-endda = '20041212'.
APPEND itab.
itab-objid = 5.itab-endda = '99991212'.
APPEND itab.
itab-objid = 0.itab-endda = '99991212'.
APPEND itab.
CLEAR itab.
LOOP AT itab.
WRITE : / itab-objid , itab-endda.
ENDLOOP.
WRITE :/.
DELETE itab WHERE endda+0(4) NE '9999' AND objid IS INITIAL.
LOOP AT itab.
WRITE : / itab-objid , itab-endda.
ENDLOOP.
regards
navin k

How to get multiple records from internal table through BDC

PERFORM DYNPRO USING:
'X' 'SAPMM61L' '0500',
' ' 'BDC_OKCODE' '=NEWC',
'X' 'SAPMM61L' '0500',
' ' 'BDC_CURSOR' 'PLPTU-PLWRK(01)',
' ' 'BDC_OKCODE' '=TAKE',
' ' 'PLPTU-PLWRK(01)' '2531'. (2531 is a plant)
This is the recording used to get plant via BDC of MS31.
Using this code i can get only single plant...
If i want to get multiple plants from an internal table,how i can change this code?
Since it is a recording i cant put this code in LOOP..ENDLOOP.
Suggest any method for doing this....
Awaiting for ur reply...

Hi,
While recording also record the scroll down button.
The you can place different plant in the BDC using loop and endloop
Regards
Arun

Unable to delete double records from internal table

Hi all,
The internal table is like this
begin of ta_itab1 occurs 0,
      mark type c,
      cnt_hedg type c,
      kunnr like vbak-kunnr,
      vbeln like vbak-vbeln,
      posnr like vbap-posnr,
      matnr like vbap-matnr,
      kwmeng like vbap-kwmeng,
      h_kwmeng like vbap-kwmeng,
      spart like vbap-spart,
      werks like vbap-werks,
      component like bom_item_api01-component,
      comp_qty like bom_item_api01-comp_qty,
      comp_qty1 like bom_item_api01-comp_qty,
      base_quan like stko_api02-base_quan,
      comp_unit like bom_item_api01-comp_unit,
      base_unit like bom_item_api01-comp_unit,
      bukrs_vf like vbak-bukrs_vf,
      end of ta_itab1.
and used the sytax:
sort ta_itab6 by kunnr vbeln.
DELETE ADJACENT DUPLICATES FROM ta_itab6 comparing COMP_QTY COMP_QTY1.
but Im unable to delete duplicate record .
Thank You.
anu

Hi ,
You need to use the fields in sort statement on whichyiu wnat to perform Delete Adjacent duplicates..
sort ta_itab6 by kunnr vbeln COMP_QTY COMP_QTY1.
DELETE ADJACENT DUPLICATES FROM ta_itab6 comparing COMP_QTY COMP_QTY1.

Delete matching records from internal table

I have two internal tables.
say :
1)zsd80
2)i_vbrk
i want to delete records from i_vbrk which are not in zsd80.
this is my code. but it shows dump error after executing. please help.
LOOP AT i_zsd80 INTO zsd80.
            LOOP AT i_konv INTO w_konv FROM w_index.
              IF w_konv-kschl NE zsd80-kschl.
                DELETE i_konv FROM w_konv.
              ENDIF.
            ENDLOOP.
          ENDLOOP.

Hi,
Do like this...
1. Loop at the where u want to delete..
2. store the sy-index...
3. read the other table....
4. if nothing found in read then delete that index...
LOOP AT i_vbrk.
TABIX = SY-TABIX.
READ TABLE zsd80 WITH KEY .......
IF SY-SUBRC NE 0.
    DELETE IT_VBRK INDEX TABIX.
ENDIF.
ENDLOOP.
regards
Sukriti.....
Edited by: Sukriti Saha on Nov 3, 2008 1:19 PM

Trouble fetching record from Internal table

Hi all,
I am using a binary search read for retrieving data from an internal table, but i am not able to fetch a particular record even while it is present in the internal table.

Check if you are sorting the table. When you are not sorting the table, the read fetch the next highest key field from the table e.g.
Suppose if you have an internal table with following keys:
12
9
13
2
22
the read will pick only 12,13 & 22 record.
Regards,
Prashant.

How to select set of unique data records from internal table

Hi
I am looking for a command in order to select all unique data-records from an internal table without using a loop. Does anybody know a command that could do this?
An illustrating example:
Example:
Table content
a 1
a 2
a 3
b 1
b 2
c 1
c 2
c 3
d 1
So I am looking for a command that should provide a, b, c & d for the first column or 1, 2 & 3 for the second column

Hi,
SELECT DISTINCT MATNR
FROM MARA
into table i_mara.
Best regards,
Prashant

Deleting records from internal tabl

Hi All,
Here i need delete records from one internal table, from another internal table. both contains same field as name1, so here , i need to delete records from t_itab , the records which are existed in t_itab1.
first internal table t_itab contains
vinesh01
vinesh02
vinesh03
vinesh04
second internal table t_itab1 contains
vinesh01
vinesh02
here i need to delte t_itab1 entries from t_itab.
regards,
vinesh.

Hi,
try this code.
first internal table t_itab contains
vinesh01
vinesh02
vinesh03
vinesh04
second internal table t_itab1 contains
vinesh01
vinesh02
loop at t_itab1.
loop at t_itab.
if t_itab-name1 = t_itab1-name1.
delete t_itab.
(OR)
delete itab where t_itab-name = t_itab1-name.
endif.
endloop.
endloop.
regards.
sriram.

How to fetch previous record from internal table?

Hi,
My final internal table (it_final) has all the data month wise year wise.(opening and closing qty)
but if
Material   Batch    Month   Year        opening_qty         closing_qty
FC5431   abc        08        2008        100                       50
FC5431   ABC       09        2009         0                          100
Suppose I want to take PREVIOUS record(closing_qty = 50 in my 09/2009 openin_qty = 50) how will Ido this?
Any solution????????? BTW i m using S033 for opening an closing qt monthwise.
Plz reply soon if anyone knows.
Thanks and Regards,
Archana

Hi,
Test the following Sample code hope will solve out your problem,
TYPES: BEGIN OF ty_test,
        m(3),
        open_qty TYPE i,
        close_qty TYPE i,
        END OF ty_test.
DATA: it_test TYPE STANDARD TABLE OF ty_test WITH HEADER LINE,
      wa_test LIKE LINE OF it_test,
      ctabix LIKE sy-tabix,
      ptabix LIKE sy-tabix.
it_test-m = 'AAA'. it_test-open_qty = 100. it_test-close_qty = 50. append it_test.
it_test-m = 'AAA'. it_test-open_qty = 0. it_test-close_qty = 100. append it_test.
LOOP AT it_test.
ctabix = sy-tabix.
IF sy-tabix > 1.
    ptabix = sy-tabix - 1.
    READ TABLE it_test into wa_test INDEX ptabix.
    IF sy-subrc = 0.
      it_test-open_qty = wa_test-close_qty.
    ENDIF.
    MODIFY it_test INDEX ctabix.
ENDIF.
ENDLOOP.
LOOP AT it_test.
WRITE: it_test-m, it_test-open_qty, it_test-close_qty, /.
ENDLOOP.
Regards,
Faisal

Processing some records from internal table.

Similar Messages

Maybe you are looking for