Production declaration based on order creation date in R/3

Hi,
Can we do the production declaaration in R/3 (mfbf) for PPDS planned orders sent to R/3 from APO based on order creation date?
This is because we need to differentiate between SNP and PPDS planned orders in R/3.
As there is no differentition in SNP and PPDS orders in R/3, while production decalration,
it's not possible that only PPDS orders will get consumed (in mfbf).
SO can we do production declaration based on order creation date instead of order number?
Please share the information.
Thanks,
Vinayak

Hello Santosh
Production versions are selected on the standard system according to the basic finish date, however, you can change the standard system behavior with the implementation of the following note:
351773 - Selection of production versions for planned order
Alternatively, you may use BAdI MD_MODIFY_PRODVERS to create your own logic to select the production versions.
BR
Caetano

Similar Messages

How can we trigger an IDOC based on Orders creation.

Hiii...experts,
After searching alot in SDN i am taking this very commonly asked to experts in the hope of a better understanding.
If i create a sales order means.. i want to trigger a IDOC based on certain Condition on ORDER data .. how can we do this..
when ever i'm creating a sales order it should be automatically trigger a IDOC , Because when ever sales ordre was created in R/3 system it should be transferred to some destination...
And pls tell me about the reports that does the job of collecting required data from the sales order and converts it into a IDOC.
so, how can we trigger an IDOC based on Orders creation..
pls help.
Ram.

Use IDOC_OUTPUT_ORDERS for creating IDOC
you need to maintain condition records & output type
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 10, 2008 4:18 PM

Move files into folders based on EXIF Creation Date

Hi all,
Being a novice with Applescript I have read what I can find on this forum, but are not able to find exactly what I'm looking for. I think that the posting "Using AppleScript to create folders and place files in them" is the closest I get to what I want but I want to create the folders based on EXIF creation date.
Let me explain.
I have a folder that contains thousands of jpg, mp4, mov and avi files; all created by different cameras. I want to bring some order to this and place files in folders based on year, month and date that the file was created (the photo taken or the video captured). This date is stored in the EXIF creation date.
     Take all files in folder A
      foreach file find the EXIF creation date
      move each file into directory tree (at same location is ok) where toplevel is YEAR, next directory level is named accoring to EXIF creation date as MMDDYY
      if no EXIF creation date can be found, fallback to creation date (file property?)
      if no good date is found, leave file alone in folder A for manual sorting; do not use modification date as this may have been altered
     this would create a structure as
     2002
            011602
                    File 1 taken Jan 16 2002
                    File 2 taken Jan 16 2002
            082002
                    File 1 taken Aug 20 2002
                    File 2 taken Aug 20 2002
      2003
             etc
     2004
         |   etc
     2014
             010114
                    File 1 taken Jan 1 2014
etc etc

Well, technically that's correct, Frank, but the same could be said of much of AppleScript - the core functionality is limited, but there's a lot you can do.
For example, it's actually trivial to use Image Events get any given EXIF tag of an image:
set theFile to (choose file)
tell application "Image Events"
          set f to open theFile
          set cD to value of metadata tag "CreationDate" of f
close f
end tell
Now, cD will have the value of the CreationDate tag (assuming it exists, of course - you'll need to wrap this in a try/end try statement). Once you have that it shouldn't be too hard to extract the date components, work out the target directory name and move the file.

How to fetch post goods issue date and sales order creation date

Hi All,
How to find out the difference between SD Sales Order Item Creation Date and final Post goods issue Date. I would like to know how to fetch those dates and what is the relationship between the tables from which i will get the dates.
Please let me know the solution .
Thanks in advance.

Hi,
Sales order creation date is when u raise a sales order in favor of the customer using VA01.......using ATP logic system purposes the material availability date....
after saving ur sales order...when u raise the Delivery using VL01n w.r.t to OR...than u have to perform picking ....In the picking Tab...specify the amount to be picked than press Post Good Issue....means the goods left the company premises ..
You can the fetch the values using tables- Use T code SE12 or SE16
Vbak-----order header
Vbap-----order item
Vbek-----order schedule line
Likp-----Delivery header
Lips----Delivery item

Sales order creation - data stored in which tables for customer

Hi experts,
During sales order creation, data entered during sales process is stored in various related tables. Can anyone list the tables where data is stored for customers?
Thank you

Dear Manisha
Once you saved the sale order,
- all header datas are stored in VBAK
- all item level datas are stored in VBAP
- schedule line confirmation in VBEP
- all condition types and values are stored in KONV / KONP
- Partner functions in VBPA
- Delivery related fields like Shipping Point, Delivery Date, Goods Issue etc., are all in VEPVG
thanks
G. Lakshmipathi

How to Sort transported KM content based on the creation date

Hi ,
I transported KM content through ICE offline transfer. all the files are copied. but the problem is all are copied with the todays date as modified date.
but I need to sort these based on the creation date.
all these files are with the xml templates.
Can only help in this regard
Thank you

Hi,
Enter the format that you have defined in the configuration of the property in the Additional Metadata parameter. Use the syntax customFormat=<pattern>.
In this link, you have at the end screenshots where to navigate in KM to see the property metadatas of your property:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/645d4357-0701-0010-07bd-a2ea8c4d0aaf
Here see the Defenitions of the KM Metadata Properties:
https://wiki.sdn.sap.com/wiki/display/KMC/DefenitionsoftheKMMetadata+Properties
Regards,
Praveen Gudapati

Sales order Creation date

Hi All,
I see that the sales order creation date in VBAK is suppose 2009.06.16 and in VA03 if i see th document flow the date is 2009.06.15. and quatation date is also 2009.06.15.
Which date is the correct Sales order date.If va03 one is correct what is the source table of this date?
PLease commnet .
Thanks in advance,
Swati

Hi ,
Let me know in which field you are looking into in VBAK table
Please let me know if you still need any help.
Thanks and regards,
Rajeshwar.

Delivery date and sales order creation date

Dear all
Can you please explain the relation between delivery date and sales order date. In my case i can create delivery with delivery date as before the sales order date... how it is possible that i can create delivery before the sales order date.??
Please explain.........
Warm Regards
Inder Pal

Hi,
Sales order date: Date on which the customer officially places an order to your company.
All the commitment and product allocation counting starts with reference to this date.
e.g. customer says that the goods are required from 20 days of placing order, then from this date the calculation starts.
Delivery date: Date on which after the system goes through material availability date, replenishment time, calculates the date on which physically the goods can be delivered to the customer.
e.g. customer orders 100 qty of material X in 15 days, you will hve to check this delivery date through availability check which can be done in sales order and also delivery.
payment date is based on this delivery date.
regards,
Siddharth.

Logic for finding transfer order creation date for a given delivery??

Hi,
I am trying to find a logic for connecting the table LTAK which has ERDAT as the T.O. creation date with LIKP/ LIPS table.
Can you please help me with this information.
Regards,
Peeyoosh.

Hi,
Go to LTAP to get the transfer order number based on delivery ltap-vbeln. Then got to ltak to get the Creation date.
Hope it helps
Vinod.

Get Archived IDocs based on IDoc creation date

Save Our Environment. Save Yourself.
Hi Experts!!!
We need to get the archived idocs based on the idoc creation date. If I give some date, then I should get all the idocs that are archived in that period. How can this be possible?
One more doubt is - I checked the logical path in FILE for archived idocs. But when I go to that in AL11, I can not see any data in that. Where can I find the details of all the archived idocs?
I serached in SCN for the same but in vain.
Please help me out. Thanks.
- I'm not an environmentalist. I'm an Earth warrior.

Please find the code to read archeived idocs
FORM read_datarecord.
STATICS ls_open TYPE boolean VALUE false.
DATA: ld_tabix TYPE sytabix,
        lt_edidc TYPE STANDARD TABLE OF edidc,
        ld_edidc TYPE edidc.
MOVE syst-tabix TO ld_tabix.
IF int_edidc-mandt IS NOT INITIAL.
ELSE.
    IF gd_use_as IS INITIAL.
      IF ls_open = false.
        CALL FUNCTION 'ARCHIVE_OPEN_FOR_READ'
          EXPORTING
            object         = 'IDOC'
          IMPORTING
            archive_handle = gd_archive_handle
          TABLES
            archive_files = gt_arch_sel.
        MOVE true TO ls_open.
      ENDIF.
      CLEAR ld_edidc.
      WHILE ld_edidc-docnum <> int_edidc-docnum.
        CALL FUNCTION 'ARCHIVE_GET_NEXT_OBJECT'
          EXPORTING
            archive_handle = gd_archive_handle
          EXCEPTIONS
            end_of_file    = 1.
        IF syst-subrc IS INITIAL.
          REFRESH lt_edidc.
          CALL FUNCTION 'IDOC_ARCHIVE_GET_TABLE'
            EXPORTING
              archive_handle   = gd_archive_handle
              record_structure = 'EDIDC'
            TABLES
              t_data           = lt_edidc.
          READ TABLE lt_edidc INTO ld_edidc INDEX 1.
          IF ld_edidc-docnum = int_edidc-docnum.
            CALL FUNCTION 'IDOC_ARCHIVE_GET_TABLE'
              EXPORTING
                archive_handle   = gd_archive_handle
                record_structure = 'EDIDD'
              TABLES
                t_data           = int_edidd.
          ENDIF.
        ELSE.
          EXIT.
        ENDIF.
      ENDWHILE.
    ELSE.
      CALL FUNCTION 'EDI_IDOC_GET_FROM_ARCHIVE'
        EXPORTING
          docnum                       = int_edidc-docnum
        TABLES
          int_edidd                    = int_edidd
        EXCEPTIONS
          idoc_not_in_infostructures   = 1
          idoc_read_error_from_archive = 2
          archive_close_error          = 3
          others                       = 4.
      IF sy-subrc <> 0.
      ENDIF.
    ENDIF.
ENDIF.
IF ls_open = true AND ld_tabix = anz_int_edidc.
    CALL FUNCTION 'ARCHIVE_CLOSE_FILE'
      EXPORTING
        archive_handle = gd_archive_handle.
ENDIF.
ENDFORM.                               " READ_DATARECORD
PS if you don't have auth to SARA then get auth . you need to talk to your business owner or talk to basis to get auth

Creating folders based on file creation date

Hi,
I have a folder full of images and I am looking for an Automator workflow/app/script that can look at the files sequentially, read the creation date and then create folder name based on the file creation date (Year-Day-Month). Then move the file to the respective folder.
Appreciate any input you can provide.
Regards
Tom Erik

Open the AppleScript Editor in the /Applications/Utilities/ folder and run:
tell application "Finder"
repeat with this_file in (get files of window 1)
set the_date to creation date of this_file
set folder_name to ((year of the_date as string) & "-" & day of the_date & "-" & month of the_date)
try
make new folder in window 1 with properties {name:folder_name}
end try
move this_file to folder folder_name
end repeat
end tell
(75533)

Image copy to folder with name based on image creation date

Hi all,
I am new to Mac OS X and automator so I would like to know the following,
Is it possible to have an automated action that triggers when I attach my camera to USB, and who copies all images to a folder which is named according to the date when the image was created?
Example:
I attach my camera and it shows up as disk image named "NIKON D70" and the images are contained in subfolders "DCIM/100NCD70" (or actually in DCIM/*). I then want all images in these folders copied to my home directory in a subdirectory called something like "Pictures/D70/2007/20070605" where the year folder name and the date folder name should be according to current image creation date (which of course can be different for each image).
I have created a simple automation script that copies images from my camera to a folder named according to current date, but that's not good enough.
Anybody having any hints or ideas of how I can accomplish this?
Regards
Anders
Mac Pro, 2x2.66GHz, 5GB, ATI X1900 XT Mac OS X (10.4.9)

Open the AppleScript Editor in the /Applications/Utilities/ folder and run:
tell application "Finder"
repeat with this_file in (get files of window 1)
set the_date to creation date of this_file
set folder_name to ((year of the_date as string) & "-" & day of the_date & "-" & month of the_date)
try
make new folder in window 1 with properties {name:folder_name}
end try
move this_file to folder folder_name
end repeat
end tell
(75533)

Planned Order creation date

Hi,
Please let me know where can we find out the date the planned order was created. In which table and which table it is tored. I have tried in table PLAF. Unable to find out this.
Regards,
V. Suresh

hi
Please try
PLAF and Field PEDTR
Order start date is Basis start Date in the planned order.
If you go to Det Scheduling tab of planned order in a Planned order there option Basic Dates , there are two dates Start and Finish ... these are the dates required by you......opt for Help Window it Shows you a Description : "Order finish date in the planned order
Date, according to the planned order, that you should expect either the completion or the delivery of the planned order quantity."
BV

BOM Explosion based on Production Order Creation

Hi PP Guru,
My client wants the BOM Explosion date to be based on Production Order creation date. Could you help to advise how to set-up this requirement?
I have showed them these possible System Configuration in BOM explosion, but none of these options are applicable to their current business practice.
<OPPQ> BOM Explosion:
     BOM explosion number/order start date
1     Order start date
2     Order finish date
3     BOM explosion number/order start date
4     BOM explosion number/order finish date
Looking forward to you reply.
thanks,
John

Hi Sundaresan,
Thanks for your reply. So do you think there's any other way to fulfill the client's requirement? I was thinking to do the "PP Master Data" instead, in order to choose the date of explosion.
Actually the scenario is this:
Initially the Material XXXXXX has a valid BOM on 03.01.2011 to 12.31.9999, but then, some changes has been made, maybe the user has changed the component or added new component using 04.01.2011 to 12.31.9999 as validity date.
For example, the user created the Production Order (manually in CO01 or from Planned Order conversion) on 03.20.2011 and the Order Star date is 04.01.2011, so the system will copy the updated BOM which is valid on 04.01.2011 to 12.31.9999 (based on Order Start date).
However, the client wants to explode the previous BOM instead (03.01.2011 to 12.31.9999).
Please advise.
Thanks,
John

How to List Sales Orders based on Creation Date and Delivery Priority

Dear all,
How can we list Sales Orders based on creation date and delivery priority.
I tried using vl10a transaction code, but there we can see sales order based on delivery date.
we need to list all sales order based on delivery priority and sales order creation date.
can any one of you tell me which standard report gives such kind of report. Your suggestions will be highly appreciated.
Thank you
Raghu Ram

Hi Raghu,
There is no st report available as per your req.
Using SQVI, you develope one report that is list of sales orders based on your req.
SQVI is used to convert a Quick View into a query.
Quick Viewer:
The Quick Viewer allows you to define reports without having to program yourself. The Quick
Viewer is especially useful for new users and occasional use.
Quick Viewer is a tool for generating reports. SAP Query offers the user a whole range of options for defining reports. SAP Query also supports different kinds of reports such as basic lists, statistics, and ranked lists. Quick Viewer, on the other hand, is a tool that allows even relatively inexperienced users to create basic lists.
Quick View definitions are user-dependent. You can transfer a Quick View into SAP Query in order to make reports, for example, accessible to additional users, or to use the other functions available in SAP Query.
The following is a comparison of Quick Views and queries:
Quick Views possess the same functional attributes as queries. However, only basic lists may be defined with Quick Views.
In contrast to queries, no user group assignment is necessary with Quick Views. Each user has his/her own personal list of Quick Views. Quick Views cannot be exchanged between users. Quick Views may, however, be converted to queries and then be made available to other users in a specific user group.
Info Sets are not required for Quick View definition. Whenever you define a Quick View, you can specify its data source explicitly. Tables, database views, table joins, logical databases, and even Info Sets, can all serve as data sources for a Quick View. You can only use additional tables and additional fields if you use an Info Set as a data source.
The Quick Viewer uses various controls. Certain hardware and software requirements must also be fulfilled before you can use the Quick Viewer.
To define a Quick View, you select certain fields according to your data source that determine the structure of your report. The report can be executed in basis mode with standard layout or may be edited using drag and drop and the other toolbox functions available in WYSIWYG mode.
Reports created using the Quick Viewer may also be passed to external programs (Excel, for example).
Call the Quick Viewer using System -> Services -> Quick Viewer (or transaction SQVI).
Enter the name of the Quick View. Quick View names can contain a maximum of 14 characters.
Choose Create.
Enter a title for the Quick View and remarks, if you think they are relevant.
If you do not want to base your list on a table, use the possible entries pushbutton in the Data source field to select another data source. You can choose logical databases or Info Sets. In addition, you may also create table joins. For further information, see Selecting a Data Source.
Choose Basis mode if you want to create the list directly with no list design. Choose Layout mode if you want to define the layout of your list yourself.
SQVI Table Quick viewer Used to created quick client dependent reports
Probably the easiest and most flexible way to do this is thru one of the ABAP query transactions.
Transaction SQVI can do this and it has a very good help function that explains how it works... the drawback is that it is only for one user.
You can play around with it and see if it meets your needs...
The query results will come back in an ALV Grid or Excel... you can select what fields are returned, and have a selection screen to enter the search criteria.
You can get the report by joining the tables VBAK and VBAP.
If you have any queries, i will forward screen shots to your id.
Reward points pls.
Regards,
Govind.

Production declaration based on order creation date in R/3

Similar Messages

Maybe you are looking for