Production Problem Help Needed From GURUS

I have the following procedure
create or replace package app_security_context_ipay AS
procedure set_region_ccode(i_regionccode IN varchar2);
END;
-- Create package Body which has access to set the context variables
CREATE OR REPLACE PACKAGE BODY APP_SECURITY_CONTEXT_IPAY AS
PROCEDURE SET_REGION_CCODE (i_regionccode IN varchar2)
IS
BEGIN
DBMS_SESSION.SET_CONTEXT('app_context_ipay','region_ccode',i_regionccode);
END;
END;
I have to Pass a long string in it that is
exec app_security_context_ipay.set_Region_ccode
('(130,''375988''),(130,''s1a''),(130,''S1E''),(130,''S1F''),(130,''S1H''),(130,''s25''),(130,''sb8''),(130,''SB9''),130,''SBB''),(130,''SBT''),(130,''SBU''),(130,''SBV''),
(130,''scn''),(130,''SCV''),(130,''seg''),(130,''sfa''),(130,''SNB''),(130,''SNC''),(130,''SPE''),(130,''SRL''),(130,''SS''),(130,''stt''),(130,''SVA''),(130,''SWK''),(130,''SWM''),130,''SXB''),130,''SXC''),130,''SXD''),130,''SXE''),130,''SXX''),130,''SY8''),130,''SZ''),(130,''SZ4''),(130,''SZ5''),(130,''SZD''),(130,''szs'')');
BUT when I pass the string it is truncating after 255 characters.
How can I pass the string to set my predicate to function properly
The Following error I got from the dump file
*** 2006-06-23 16:42:12.103
Error information for ORA-28113:
Logon user : CRUVPD
Synonym : CRUVPD.T_IPAY_USER
Policy name : TIPAYUSER_IPAY_POLICY
Policy function: SECUSR.OE_SECURITY_IPAY.REGION_CCODE_SEC
RLS predicate :
(REGCODE,CCODE) in ((130,'375988'), (130,'s1a'),(130,'S1E'),(130,'S1F'),(130,'S1
H'), (130,'s25'),(130,'sb8'),(130,'SB9'), (130,'SBB'),(130,'SBT'),(130,'SBU'), (
130,'SBV'),(130,'scn'),(130,'SCV'), (130,'seg'),(130,'sfa'),(130,'SNB'), (130,'S
NC'),(130,'SPE'),(130,'SRL'), (130,')
ORA-00920: invalid relational operator
ORA-00920: invalid relational operator
ANY Help is greatly appreciated

Hi Kamal
Thanks for the reply I made the changes but again the same thing is happening. Let me explain you the problem in a bit detail.
we have a web application that passes a token that we use to set the context. If the token is less than 255 characters we dont have any problems but if the token exceeds 255 it truncates the rest that causes the predicate function to issue an incomplete where clause.
When I changed the code with the one you recommended the same thing happend again. Here is the out put.
SQL> CREATE OR REPLACE PACKAGE BODY APP_SECURITY_CONTEXT_IPAY AS
2 PROCEDURE SET_REGION_CCODE (i_regionccode IN varchar2)
3 IS
4 BEGIN
5 DBMS_SESSION.SET_CONTEXT('app_context_ipay','region_ccode',i_re gionccode ,4000);
6 END;
7
8 END;
9 10 /
Then i passed the same token as
SQL> exec app_security_context_ipay.set_Region_ccode ('(130,''375988''),(130,''s 1a''),(130,''S1E''),(130,''S1F'') -
,(130,''S1H''),(130,''s25''),(130,''sb8''),(130,''SB9''),130,''SBB''),(130,''S BT''),(130,''SBU''),(130,''SBV''), -
(130,''scn''),(130,''SCV''),(130,''seg''),(130,''sfa''),(130,''SNB''),(130,''S NC''),(130,''SPE''), -
(130,''SRL''),(130,''SS''),(130,''stt''),(130,''SVA''),(130,''SWK''),(130,''SW M''),(130,''SXB''), -
(130,''SXC''),(130,''SXD''),(130,''SXE''),130,''SXX''),130,''SY8''),130,''SZ'' ),(130,''SZ4''), -
(130,''SZ5''),(130,''SZD''),(130,''szs'')');PL/SQL procedure successfully completed.
*********************************************************************8
Then i queried one of the table that has the VPD on it
SQL> Select count(*) from t_ipay_user;
Select count(*) from t_ipay_user
ERROR at line 1:
ORA-28113: policy predicate has error
I checked the token in the context and find out that it was truncated
SQL> select sys_context ('APP_CONTEXT_IPAY','REGION_CCODE') from dual;
SYS_CONTEXT('APP_CONTEXT_IPAY','REGION_CCODE')
(130,'375988'),(130,'s1a'),(130,'S1E'),(130,'S1F') ,(130,'S1H'),(130,'s25'),(13
0,'sb8'),(130,'SB9'),130,'SBB'),(130,'SBT'),(130,'SBU'),(130,'SBV'), (130,'scn'
),(130,'SCV'),(130,'seg'),(130,'sfa'),(130,'SNB'),(130,'SNC'),(130,'SPE'), (130
,'SRL'),(130,'SS
Is there any way that I can pass the whole token that is greater than 255 character beacuse if it is do able on the Sqlplus level we can modify our application too. And its really important and urgent.
Thanks for all the help waiting for the reply.

Similar Messages

IPod Help needed from serious Apple gurus - iPod Touch 2g 16g stuck in restart loop. Will NOT enter DFU or recovery mode, NOT recognized by iTunes on Windows or Mac

Ok, so here's the not so sad story. I bought an iPod Touch 2g 16g through Ebay - so forget warranties. Luckily I did not pay much. The description said it was stuck on the apple logo, so I figured it would be an easy put into recovery mode and restore problem.
Not so much.
If you plug the iPod in and charge up the battery the LCD will come to life after a while with the apple logo, then it displays the spinning wheel with the apple logo over it. That will last anywhere from 10 - 15 minutes, then the iPod will go blank for a few secs and then start up the cycle all over again.
As stated, this iPod will NOT enter either DFU or recovery mode and believe me I've tried it several times several different ways with different timings, connected via USB to a Mac, connected to a different Mac running Windows, and connected to just the charger. Nothing. Occasionally the screen might go blank while holding the power and home buttons but nothing else happens and then it starts it's usual cycle again.
Again, iPod NOT recognized by iTunes on either Mac or Windows side. Since I got off Ebay and seller didn't know much about it, I have no idea if someone tried to jailbreak this or not.
I will not put much money into this machine. So I guess my question is: does this behavior mean that the motherboard is clearly fried? Are there any software programs that might diagnose what the problem is? Could it be as simple as a fried battery?
And most importantly, is this iPod simply toast or is there anything anyone can suggest????
Really any suggestions would be greatly greatly appreciated. Seems a shame to just trash an iPod touch that might need a simple fix...
If it helps matters, I can tinker with iPods somewhat and have torn down and replaced several iPod touch 1g and 2g glass and digitizers with no problems. I'm somewhat software savvy but the whole jailbreak thing is new territory... and I can't really figure out the command in Windows or Mac terminals to list all connected devices so I have no idea if the computer even knows the iPod is there, even if iTunes doesn't. Guess that's it... ummm, please help???

Nothing huh? No one's had this problem or this isn't fixable... oh well... if anybody comes up with anything I'll check in occasionally...

HT4929 help needed - from mobileme to icloud with pc plus smartphone but no i-products

I don't use an iphone or i anything else but have a mobileme mail account which I want to transfer to icloud - I have a pc which will need the icloud "adaptor" - what do I do next and what will I be able to use with my existing smartphone?

Firstly, I note that your profile states that you are using OS X 10.5.8, in order to use iCloud on your computer you need OS X 10.7.2 or better.
Secondly, I have asked for your email address to be edited out. Post your address in an open thread is a sure way to be bombarded by unwanted email, remember it will be here long after you have resolved your problem, for automated detection software to find.
If you want people to contact you, enable others to see your email address in your profile.
Finally, are you sure that these additional addresses are aliases and not sub accounts on a family pack, aliases from MobileMe should transfer to an iCloud when you migrate.

Pagination problem, help needed to finish it

Hi friends,
I am in need to use pagination in my Web Application, since i have a tons of values to display as a report. I develop a pagination logic, tested it seperately and it works fine.When i try to implement it to current project it works, but no result was displayed as it displayed in testing..
Here is the file i tested seperately..
<%@ page contentType="text/html; charset=iso-8859-1" language="java" import="java.sql.*" errorPage="" %>
<%@ page import="com.rajk.javacode.servlets.dbmodel"%>
<%
int count=0;
int userid = 0;
String g = null;
dbmodel db=new dbmodel();
Statement ps = null;
ResultSet rs = null;
db.connect();
String SQL = "select * from tbl_rmadetails";
ps=db.con.createStatement();
rs=ps.executeQuery(SQL);
rs.last();
count= rs.getRow();
rs.beforeFirst();
int currentrs;
int pagecount=(count/2);
if((pagecount*2)+1>=count)
pagecount++;
out.println("<table width=363 height=20 align=center border=0 cellpadding=0 cellspacing=0><tr><td>");
for(int i=1;i<pagecount;i++)
out.println("<a href=pagination.jsp?pagenum="+ i +"&userid="+ userid +">["+ i +"]</a>");
String pagenum=request.getParameter("pagenum");
if(pagenum==null)
out.println(" Page 1 of " + (pagecount-1) +"");
currentrs=0;
else
out.println(" Page " + pagenum + " of " + (pagecount-1) + "");
pagecount=Integer.parseInt(pagenum);
currentrs=(2*(pagecount-1));
out.println("</td></tr></table>");
//messageboard
String sql="select * from tbl_rmadetails order by date LIMIT " + currentrs + ",2";
rs=ps.executeQuery(sql);
while(rs.next())
%>
 
<table width="363" height="64" border="1" align="center" cellpadding="0" cellspacing="0" bgcolor="#FFFFFF">
<tr>
</td>
<td width="126" height="19" align="center" valign="top"><%=rs.getString("serial_no")%></td>
<td width="126" height="19" align="center" valign="top"><%=rs.getString("status")%></td>
</tr>
</table></td>
</tr>
</table>
<%
rs.close();
%> And here is the file in which i want to implement the pagination..
<%@ page contentType="text/html; charset=iso-8859-1" language="java" import="java.sql.*" errorPage="" %>
<%@ page import="com.rajk.javacode.servlets.dbmodel"%>
<%
int x1=0;
int userid = 0;
int count = 0;
String raj=request.getParameter("q");
String temp=null;
String SQL = null;
String SQLX = null;
int currentrs;
try
dbmodel db=new dbmodel();
Statement ps = null;
ResultSet rs = null;
db.connect();
if(raj.equals("All Vendor"))
SQL = "SELECT * FROM tbl_rmadetails,tbl_customer,tbl_item,tbl_vendor WHERE tbl_rmadetails.customer_id=tbl_customer.customer_id AND tbl_rmadetails.item_id=tbl_item.item_id AND tbl_rmadetails.vendor_id=tbl_vendor.vendor_id AND tbl_rmadetails.status='STS'";
else
SQL = "SELECT * FROM tbl_rmadetails,tbl_customer,tbl_item,tbl_vendor WHERE tbl_rmadetails.customer_id=tbl_customer.customer_id AND tbl_rmadetails.item_id=tbl_item.item_id AND tbl_rmadetails.status='STS' AND tbl_rmadetails.vendor_id=tbl_vendor.vendor_id AND tbl_rmadetails.vendor_id='"+raj+"'";
ps=db.con.createStatement();
rs=ps.executeQuery(SQL);
rs.last();
count= rs.getRow();
rs.beforeFirst();
rs.close();
int pagecount=(count/6)+1;
if((pagecount*6)+1>=count)
pagecount++;
//out.print(count);
%>
<%
for(int i=1;i<pagecount;i++)
out.println("<a href=http://localhost:8080/rmanew/sendtovendor.jsp?pagenum="+ i +"&userid="+ userid +">["+ i +"]</a>");
String pagenum=request.getParameter("pagenum");
if(pagenum==null)
out.println(" Page 1 of " + (pagecount-1) +"");
currentrs=0;
else
out.println(" Page " + pagenum + " of " + (pagecount-1) + "");
pagecount=Integer.parseInt(pagenum);
currentrs=(6*(pagecount-1));
if(raj.equals("All Vendor"))
SQLX = "SELECT * FROM tbl_rmadetails,tbl_customer,tbl_item,tbl_vendor WHERE tbl_rmadetails.customer_id=tbl_customer.customer_id AND tbl_rmadetails.item_id=tbl_item.item_id AND tbl_rmadetails.vendor_id=tbl_vendor.vendor_id AND tbl_rmadetails.status='STS' LIMIT"+currentrs+",6";
else
SQLX = "SELECT * FROM tbl_rmadetails,tbl_customer,tbl_item,tbl_vendor WHERE tbl_rmadetails.customer_id=tbl_customer.customer_id AND tbl_rmadetails.item_id=tbl_item.item_id AND tbl_rmadetails.status='STS' AND tbl_rmadetails.vendor_id=tbl_vendor.vendor_id AND tbl_rmadetails.vendor_id='"+raj+"' LIMIT"+currentrs+",6";
rs=ps.executeQuery(SQLX);
if(rs!=null)
while(rs.next())
%>
<link rel="stylesheet" type="text/css" href="chromejs/stvcss.css" />
<table width="100%" border="0">
<tr bgcolor="#0066CC">
<td align="center">Date</td>
<td align="center" class="style2">Product Details</td>
<td align="center" class="style2">Serial No</td>
<td align="center" class="style2">Fault Desc</td>
<td align="center" class="style2">Customer Name</td>
<td align="center" class="style2">Vendor Name</td>
<tr>
<tr bgcolor="#CCCCCC">
<td align="center"><%=rs.getDate("date")%></td>
<td align="center"><%=rs.getString("item_description")%></td>
<td align="center"><%=rs.getString("serial_no")%></td>
<td align="center"><%=rs.getString("fault_desc")%></td>
<td align="center"><%=rs.getString("customer_name")%></td>
<td align="center"><%=rs.getString("vendor_name")%></td>
</tr>
</table>
<%
else
out.println("Result Set is empty");
catch(Exception e)
System.out.println("Error: " + e);
response.setContentType("text/xml");
response.setHeader("Cache-Control", "no-cache");
%>The output i got when i ran this page is..
[1]
And no records displayed matching the query, but there is a lot of datas in DB as a result of the queries i mentioned here..
Please help me friends...

Debug your code. Check what happens and what happens not.
You could make it much easier if you wrote Java code in Java classes rather than JSP files. Now it's one big heap of mingled -and thus hard to maintain/test/reuse- code.

Linked lists problem -- help needed

Hello again. I've got yet another problem in my C++ course that stems from my use of a Mac instead of Windows. I'm going to install Parallels so I can get Windows on my MacBook and install Visual Studio this week so that I don't have to deal with these discrepancies anymore, but in the meanwhile, I'm having a problem here that I don't know how to resolve. To be clear, I've spent a lot of time trying to work this out myself, so I'm not just throwing this up here to have you guys do the work for me -- I'm really stuck here, and am coming here as a last resort, so I'll be very, very appreciative for any help that anyone can offer.
In my C++ course, we are on a chapter about linked lists, and the professor has given us a template to make the linked lists work. It comes in three files (a header, a source file, and a main source file). I've made some adjustments -- the original files the professor provided brought up 36 errors and a handful of warnings, but I altered the #include directives and got it down to 2 errors. The problematic part of the code (the part that contains the two errors) is in one of the function definitions, print_list(), in the source file. That function definition is shown below, and I've marked the two statements that have the errors using comments that say exactly what the errors say in my Xcode window under those two statements. If you want to see the entire template, I've pasted the full code from all three files at the bottom of this post, but for now, here is the function definition (in the source file) that contains the part of the code with the errors:
void LinkedList::printlist( )
// good for only a few nodes in a list
if(isEmpty() == 1)
cout << "No nodes to display" << endl;
return;
for(CURSOR = FRONT_ptr; CURSOR; CURSOR = CURSOR-> link)
{ cout << setw(8) << CURSOR->name; } cout << endl; // error: 'setw' was not declared in this scope
for(CURSOR = FRONT_ptr; CURSOR; CURSOR = CURSOR-> link)
{ cout << setw(8) << CURSOR->test_grade; } cout << endl; // error: 'setw' was not declared in this scope
As you can see, the problem is with the two statements that contain the 'setw' function. Can anyone help me figure out how to get this template working and get by these two errors? I don't know enough about linked lists to know what I can and can't mess with here to get it working. The professor recommended that I try using 'printf' instead of 'cout' for those two statements, but I don't know how to achieve the same effect (how to do whatever 'setw' does) using 'printf'. Can anyone please help me get this template working? Thank you very, very much.
For reference, here is the full code from all three files that make up the template:
linkedlist.h (header file):
#ifndef LINKED_LINKED_H
#define LINKED_LINKED_H
struct NODE
string name;
int test_grade;
NODE * link;
class Linked_List
public:
Linked_List();
void insert(string n, int score);
void remove(string target);
void print_list();
private:
bool isEmpty();
NODE *FRONT_ptr, *REAR_ptr, *CURSOR, *INSERT, *PREVIOUS_ptr;
#endif
linkedlist.cpp (source file):
#include <iostream>
using namespace std;
#include "linkedlist.h"
LinkedList::LinkedList()
FRONT_ptr = NULL;
REAR_ptr = NULL;
PREVIOUS_ptr = NULL;
CURSOR = NULL;
void Linked_List::insert(string n, int score)
INSERT = new NODE;
if(isEmpty()) // first item in List
// collect information into INSERT NODE
INSERT-> name = n;
// must use strcpy to assign strings
INSERT -> test_grade = score;
INSERT -> link = NULL;
FRONT_ptr = INSERT;
REAR_ptr = INSERT;
else // else what?? When would this happen??
// collect information into INSERT NODE
INSERT-> name = n; // must use strcpy to assign strings
INSERT -> test_grade = score;
REAR_ptr -> link = INSERT;
INSERT -> link = NULL;
REAR_ptr = INSERT;
void LinkedList::printlist( )
// good for only a few nodes in a list
if(isEmpty() == 1)
cout << "No nodes to display" << endl;
return;
for(CURSOR = FRONT_ptr; CURSOR; CURSOR = CURSOR-> link)
{ cout << setw(8) << CURSOR->name; } cout << endl; // error: 'setw' was not declared in this scope
for(CURSOR = FRONT_ptr; CURSOR; CURSOR = CURSOR-> link)
{ cout << setw(8) << CURSOR->test_grade; } cout << endl; // error: 'setw' was not declared in this scope
void Linked_List::remove(string target)
// 3 possible places that NODES can be removed from in the Linked List
// FRONT
// MIDDLE
// REAR
// all 3 condition need to be covered and coded
// use Trasversing to find TARGET
PREVIOUS_ptr = NULL;
for(CURSOR = FRONT_ptr; CURSOR; CURSOR = CURSOR-> link)
if(CURSOR->name == target) // match
{ break; } // function will still continue, CURSOR will
// mark NODE to be removed
else
{ PREVIOUS_ptr = CURSOR; } // PREVIOUS marks what NODE CURSOR is marking
// JUST before CURSOR is about to move to the next NODE
if(CURSOR == NULL) // never found a match
{ return; }
else
// check each condition FRONT, REAR and MIDDLE
if(CURSOR == FRONT_ptr)
// TARGET node was the first in the list
FRONT_ptr = FRONT_ptr -> link; // moves FRONT_ptr up one node
delete CURSOR; // deletes and return NODE back to free memory!!!
return;
}// why no need for PREVIOUS??
else if (CURSOR == REAR_ptr) // TARGET node was the last in the list
{ // will need PREVIOUS for this one
PREVIOUS_ptr -> link = NULL; // since this node will become the last in the list
REAR_ptr = PREVIOUS_ptr; // = REAR_ptr; // moves REAR_ptr into correct position in list
delete CURSOR; // deletes and return NODE back to free memory!!!
return;
else // TARGET node was the middle of the list
{ // will need PREVIOUS also for this one
PREVIOUS_ptr -> link = CURSOR-> link; // moves PREV nodes' link to point where CURSOR nodes' points
delete CURSOR; // deletes and return NODE back to free memory!!!
return;
bool Linked_List::isEmpty()
if ((FRONT_ptr == NULL) && (REAR_ptr == NULL))
{ return true; }
else
{ return false;}
llmain.cpp (main source file):
#include <iostream>
#include <string>
#include <iomanip>
using namespace std;
#include "linkedlist.h"
int main()
Linked_List one;
one.insert("Angela", 261);
one.insert("Jack", 20);
one.insert("Peter", 120);
one.insert("Chris", 270);
one.print_list();
one.remove("Jack");
one.print_list();
one.remove("Angela");
one.print_list();
one.remove("Chris");
one.print_list();
return 0;

setw is the equivalent of the field width value in printf. In your code, the printf version would look like:
printf("%8s", CURSOR->name.c_str());
I much prefer printf over any I/O formatting in C++. See the printf man page for more information. I recommend using Bwana: http://www.bruji.com/bwana/
I do think it is a good idea to verify your code on the platform it will be tested against. That means Visual Studio. However, you don't want to use Visual Studio. As you have found out, it gets people into too many bad habits. Linux is much the same way. Both development platforms are designed to build anything, whether or not it is syntactically correct. Both GNU and Microsoft have a long history of changing the language standards just to suit themselves.
I don't know what level you are in the class, but I have a few tips for you. I'll phrase them so that they answers are a good exercise for the student
* Look into const-correctness.
* You don't need to compare a bool to 1. You can just use bool. Plus, any integer or pointer type has an implicit cast to bool.
* Don't reuse your CURSOR pointer as a temporary index. Create a new pointer inside the for loop.
* In C++, a struct is the same thing as a class, with all of its members public by default. You can create constructors and member functions in a struct.
* Optimize your function arguments. Pass by const reference instead of by copy. You will need to use pass by copy at a later date, but don't worry about that now.
* Look into initializer lists.
* In C++ NULL and 0 are always the same.
* Return the result of an expression instead of true or false. Technically this isn't officially Return Value Optimization, but it is a good habit.
Of course, get it running first, then make it fancy.

Cant connect jsp with mysqlserver..help needed from person in jsp on linux

hii,
I have installed mysql on linux 7.x.This was installed during installation of linux.From the shell prompt i can go inside mysql and can successfully execute all query statements.
Now have downloaded mm.mysqljdbc driver(i.2c) and installed it,set the classpath in .bash_profile,sh file
Everything ,including Tomcat Apache server is running fine
But i am unable to connect a jsp page to mysql database.
A error message "server configuration denies access to datasource " is coming .
My code is like this
<%
String username-"root"
String password="sdctest"
%>
<% try
class.forname("org.gjt.mm.mysql.Driver");
java.sql.Connectioncon= java.sql.DriverManager.getConnection("jdbc:mysql://localhost/products"username,password);
then opening recordset ....
Error is coming in the second line while establishing connection.
Here i would like to mention that username and password is the username and password of the root user in LInux.
Now i mm confused what username and password will have to be used in JSP.Because i did nt have to specify any username or password while entering mysql.
If my problem is clear,somebody please help...all jobs stuck.

Try doing it without the username and password, otherwise create a new user in MySQL.

Standard Product Costing help needed

Hello SAP Gurus,
To cost a manufactured product, my company does the following:
Raw material cost+ labor hours* labor rate+ overhead+subcontracting charges (if done)
overhead = labor hours* overhead rate
Please guide me as to how I should configure the overhead cost elements, costing sheet and other configurations.
I have read up the material on product costing but am finding it difficult to do the settings in my scenario.
Please help me. Its very urgent.
I will award the points immediately.
Thanks,
Eilzaa

Elizaa,
For this you need to define Costing Sheet.
You need Base --- On which Overhead need to applied
Overhead Key -- how much percentage/value of overhead need to be applied
Credit key --- Offsetting crediting Cost Element and Cost Center
Suppose you want to Apply $20 overhead on every 1Hr Labor then .
Assume you have 2 Activity types with respective allocation Cost Element 91000 and 91001
Overhead Cost Element is 94000 and overhead Cost Center is 1000
Your calculation Base is B00 --- with values 91000 to 91001
Your Overhead Key is Quantity Base overhead key O00 -- with Actual overhead and planned overhead of $10 per 1 HR
Your Credit Key is C01 -- 94000 with 1000
Thus, if there is 1.5 Hrs of labor hrs (Activity1 and Activity2) are performed then system will calculate 20+10 = $30 Overhead and will credit 94000 with 1000 Cost Center and Debit the Production order.
So total cost in this example will be
Raw material Cost + Labor Cost based on Activity Prices + $30 Overhead Costs
Thanks
Sivaram

Multiple problems - help needed please

I've got so many problems that I've completely confused myself. So, if anyone can help….
I was previously using a D-Link D-320T DSL modem on BT Broadband in the UK. The modem was set up in bridge mode, and hooked up via ethernet to my Airport Extreme (n). The AEBS would use PPPoE and successfully connected to the internet, as well as handling all my network needs.
Everything worked and everything was fine, allowing screen sharing and file sharing between my Mac Mini, MacBook and MacBook Pro.
Earlier this week, the internet connection dropped and I couldn't find the cause. Resetting the router and hooking it up directly to my Mac Mini, I connected to it (192.168.1.1) and had it connect to the internet itself.
It did so, and distributed IP addresses to the Mac Mini…but after 30 seconds my internet connection dropped, and looking in network preferences, I found that the modem had jumped from a router address of 192.168.1.1, to an 82.xx.xx.xx address, which was clearly the public IP address forwarded by my ISP. So it seemed like it was working in a sort of bridge mode still.
I reset the router numerous times, tried switching it into full bridge mode etc, but the AEBS was unable to use it to connect via PPPoE as before, because the D-Link would play nice for 30 seconds, then jump around with addresses.
Very strange, but I assumed the modem was just broken.
I dug out my spare router, being the Netgear DG632.
I managed to get this hooked up to the internet really quickly, and using an ethernet connection to the Mac Mini, it all appeared fine. However, as I started looking around the internet, I noticed that although google.com would open up, any subsequent links, and indeed any other domains I tried to visit would not open.
Resetting the router seemed to solve this.
I then hooked up my AEBS to the Netgear and, after pondering which way to use it, I found the only way I could get it to play nice was to have the AEBS in bridge mode itself, meaning that the Netgear would do all the routing work.
The MacBook connected to the airport, and all seemed okay….
…However, I then noticed that the internet connection would randomly drop. Web pages would not open (in any browser), and downloads which were under way could be seen in the Safari download manager to suddenly crash.
The same was true on the Mac Mini - web browsing stopped at random. I had however hooked this up to the airport via an ethernet cable, I noticed that, although the "internet" wasn't working, other connections like torrents were still active.
Reconnecting the Netgear router directly to the Mac Mini allowed me to see in its diagnostics that it still held a connection to the ISP and still had an external IP address.
Again, a reset of the router seemed to resolve things….but only for a few hours. And whilst the Mac Mini seemed resilient, the airport connection to the MacBook was terrible. (I haven't even tried using the MBP yet).
Furthermore, I noticed that networking between devices had severely been crippled. Although the Mac Mini and MacBook were visible to each other in the shared devices section of finder, clicking the link meant waiting literally four minutes for a connection to establish, and screen sharing timed out, from either direction.
I then tried assigning everything static IP addresses, but this seemed to confuse matters with the router.
Under the impression that the Netgear clearly couldn't handle the job of routing my network, I tried to set it up in bridge mode and use the AEBS as before.
Reading around the internet (on my iPhone at this stage), I realised there was no obvious "bridge mode" option, but I was told to set the device mode as router, and then say "no" when it asks if there are any login details for the ISP (under Basic Router Settings). This was done.
However, setting up the AEBS with PPPoE had no success, and the connection was never made.
At this stage, I'm living with a crippled network and two routers, neither of which do what I want.
Can anybody advise me on a solution to fix either router/modem?
I want to use the modem in bridge mode and have the AEBS handle everything as before, as it was perfect.
At this stage, which a frazzled brain (after messing with everything for several hours), something step-by-step would be great.
Help! (and thanks)

I have also recently developed problems with my airport network. I was playing my air tunes when it started freezing so i reset my airport extreme and expresses. When I tried to setup my networks again I en counted problems like airport utility couldn't find the extreme base station or when it did it couldn't read the setting. I eventually managed to create a network then when i tried to connect to the network it either asks for the password (even though its saved in keychain) When I enter the password it keeps saying "connection time out". I then turn airpot off & on and it the sometimes reconnects automatically without requiring a password.
My internet then will sometime start working again but then drop out completely or take an age to load.
The network will then sometimes disappear from the network list and I'm unable to see it at all.
No matter how many time i reset the base station it doesn't make a difference.
I my broadband modem is also a wireless router and Im experiencing similar problems with that. I took my laptop to work and tried to connect to the network at work and it seems to work ok except it did ask for a password the time out but did it only once.
I did download a security update recently but im not sure if its that that is causing it
please help me as well as I'm stuck without my network

SQL problem - help needed ASAP!!

Hey guys,
Doing a college project... would really appreciate some help. I am trying to use a variable in the where clause of a select cursor in PL/SQL. The code is this:
procedure results(p_search_entry varchar2, p_search_field varchar2) is
cursor c_results is
select * from physics_b where p_search_field = p_search_entry;
begin
for cv_results in c_results
loop
-- loop through actions
end loop;
The problem is that I don't know how to get the where clause to accept the variable passed into the procedure as the field name. Does anyone know the syntax for this?
Thanks very much!
Niall

This isn't the correct forum for this kind of question. The SQL and PL/SQL forum PL/SQL is probably best.
That said, you can't do what you want that way.
You can do
procedure results (p_search_entry in varchar2)
cursor c_result is
select * fro physics_b where subject=p_search_entry;(assuming subject is a column in physics_b)
You can't use a variable to represent a column directly. You need to build the statement as a string and then use execute immediate.
statement:='select * fro physics_b where '||p_search_field||' = :1';
-- this bit is probably bad syntax.
execute immediate statement using p_search_entry;Look up execute immediate and bind variables

Interesting problem - Help Needed

I am currently working on developing a report that has a cross tab layout. The number of columns are arbitrary and decided at run time. I am trying to create a
report template. The XML feed for the report has the following structure
<group name="SETTLE_INFO" source="settlementlvl">
 <element name="SETTLE_DATE" value="umb_settlement_date"/>
 <element name="BANK_NAME" value="bank_name"/>
 <element name="PRODUCT_NAME" value="product_name"/>
 <element name="PRODUCT_LVL_TOTAL_BAL" value="prtdlvl_balance"/>
 <element name="PRODUCT_LVL_TOTAL_ACCNTS" value="prtdlvl_account_count"/>
</group>
Here each settlement date may have many banks having many product levels. I am trying to summarize this information in a cross tab report which has the following structure:
For each settlement date (row) -> for each group of Banks(column) -> for each group of products under each Bank(column) -> display total summation of bal and accounts for each product (cell).
How do I generate these multiple levels of dynamic columns at run time?
Ashwin

Thanks for your help. I am able to generate columns at run time but my problem is a bit more complex.
I have to generated a table structure like following:
| UMB Settlement Date | Bank Name1 | Bank Name2 |
| ------------------------------------------------------------------------------------------------------------------
| | Product Name1 | Product Name2 | Product Name1 | Product Name2 | Product Name3 |
|--------------------------------------------------------------------------------------------------------------------------------------------------
The problem that I am facing is that I am not able to get the desired structure like this, i.e encapsulating the products columns under the bank column.
My RTF template look like the following:
UMB Settlement Date <?horizontal-break-table:1?> | <?for-each-group@column:SETTLE_INFO;./BANK_NAME?><?BANK_NAME?><?end for-each-group?> |
| <?for-each-group@column:SETTLE_INFO;./BANK_NAME?><?variable@incontext:G3;BANK_NAME?><?for-
| each-group@column://SETTLE_INFO;./PRODUCT_NAME?><?if: count(current-group()
| [BANK_NAME=$G3])?><?PRODUCT_NAME?><?end if?><?end for-each-group?><?end for-each-group?>
--------------------------------------------------------------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------
The bank header column and the product header column are out of sync. How do I make sure that the product name column is contained within the header of the bank name column.
Please let me know if you need more information about this.
Ashwin

Urgent Help Needed from MSI Tech!!

I have currently 65MB Kingston PC 133 and the system will boot all the way to Windows and stay stable.
I put 256MB Kingston PC 133 RAM and Windowns doesn`t detect anything more than 65MB.
MY PC then keeps resetting and even at some points powering off. Could the problem be main board damage or something ?
Beside the DIMM slots are 2 small black transistors or something and 1 has a burn mark on it.
PLZ HELP!!!

------------
DXDIAG INFO
Operating System: Windows Me (4.90, Build 3000)
Language: English (Regional Setting: English)
System Manufacturer: Micro-Star Inc.
System Model: MS-6529
BIOS: American Megatrends
Processor: Intel(R) Pentium(R) 4 CPU 1500MHz
Memory: 64MB RAM
Page File: 49MB used, 1934MB available
Windows Dir: C:WINDOWS
DirectX Version: DirectX 9.0a (4.09.0000.0901)
DX Setup Parameters: None
DxDiag Version: 4.09.0000.0901 32bit
- ** DMI Information ** -
***************BIOS INFORMATION(TYPE0)***************
Length : 14h
Handle : 0h
Vendor Name : American Megatrends Inc.
BIOS Version : V1.3
BIOS Build Date : 02/25/02
BIOS starting Address Segment : f000h
BIOS starting Address Segment : 128 K
(7fc8da98h)BIOS Characteristics :
ISA is supported : Yes
MCA is supported : No
EISA is supported: No
PCI is supported : Yes
PCMCIA is supported : No
Plug and Play is supported : Yes
APM is supported : No
BIOS is Upgradeable (FLASH) : Yes
BIOS shadowing is allowed : Yes
VL-VESA is supported : No
ESCD supported is available : Yes
Boot from CD is supported : Yes
Selectable Boot is supported : No
BIOS ROM is socketed : No
Boot From PCMCIA is supported : No
EDD specification is supported : Yes
for NEC 9800 1.2MB 3.5" : No
for Toshiba 1.2mb 3.5" : No
5.25"/360 KB Floppy supported : Yes
5.25"/1.2 MB Floppy supported : Yes
3.5"/720 KB Floppy supported : Yes
3.5"/2.88 MB Floppy supported : Yes
Print Screen is supported : Yes
8042 Keyboard are supported : Yes
Serial Services are supported : Yes
Printer Services are supported : Yes
CGA video Services are supported : Yes
PC-98 : No
ACPI supported : No
USB Legacy is supported : No
AGP is supported : No
I2O boot is supported : No
LS-120 boot is supported : No
ATAPI ZIP Drive boot is supported : No
1394 boot is supported : No
Smart Battery supported : No
***************SYSTEM INFORMATION(TYPE1)***************
Length : 19h
Handle : 1h
Manufacturer Name : Micro-Star Inc.
Product Name : MS-6529
Version : 100
Serial Number : 00000000
UUID : 0000000000000000h
Wake-up Type : (04h)Modem Ring
***************BASE BOARD INFORMATION(TYPE2)***************
Length : 8h
Handle : 2h
Manufacturer Name : Micro-Star Inc.
Product Name : MS-6529
Version : 100
Serial Number : 00000000
***************SYSTEM ENCLOSURE OR CHASSIS(TYPE3)***************
Length : 11h
Handle : 3h
Manufacturer Name : Uknown Chassis Manufacture
Type : (03h)Desktop
Version : Version 1.00
Serial Number : 123456890
Asset Tag Number : 0123ABC
Bootup State : (02h)Unknown
Power Supply State : (02h)Unknown
Thermal State : (02h)Unknown
Security Status : (02h)Unknown
***************PROCESSOR INFORMATION(TYPE4)***************
Length : 20h
Handle : 4h
Socket Designation : PGA423
Processor Type : (03h)Central Processor
Processor Family : (b2h)Unknown
Processor Manufacturer : Intel
Processor ID : 00000f0ah 00000055h
Processor Version : Intel(R) Pentium(R) 4 Processor
Voltage : (06h)unknow
External Clock : (0064h)100 MHz
Max Speed : (0960h)2400 MHz
Current Speed : (05dch)1500 MHz
Status : (41h)CPU Socket Populated , CPU Enabled
Processor Upgrade : (08h)Slot 1
L1 Cache Handle :0005h
L2 Cache Handle :0006h
L3 Cache Handle :Processor has no L3 cache
***************CACHE INFORMATION(TYPE7)***************
Length : 13h
Handle : 5h
Socket Designation : Internal Cache
(0180h)Cache Configuration :
Cache Level : L1 Cache
Cache Socketed : Not Socketed
Location, relative to the CPU module : Internal
Cache Memory : Enabled
Operational Mode : Write Through
Maximum Cache Size : ( 8010h)1024 K
Installed Size : (0020h)32 K
Supported SRAM Type : (0020h)Synchronous Type
Current SRAM Type : (0020h)Synchronous Type
Cache Speed : Unknow
Error Correction : None
System Cache : Unified
Associativity : 4-Way
***************CACHE INFORMATION(TYPE7)***************
Length : 13h
Handle : 6h
Socket Designation : Internal Cache
(0181h)Cache Configuration :
Cache Level : L2 Cache
Cache Socketed : Not Socketed
Location, relative to the CPU module : Internal
Cache Memory : Enabled
Operational Mode : Write Through
Maximum Cache Size : ( 8010h)1024 K
Installed Size : ( 8004h)256 K
Supported SRAM Type : (0020h)Synchronous Type
Current SRAM Type : (0020h)Synchronous Type
Cache Speed : Unknow
Error Correction : None
System Cache : Unified
Associativity : 4-Way
***************MEMORY CONTROLLER INFORMATION(TYPE5)***************
Length : 16h
Handle : 7h
Error Detecting Method : (05h)32-bit ECC
Error Correcting Capability : (08h)Single Bit Error Correcting
Supported Interleave : (03h)One Way Interleave
Current Interleave : (03h)One Way Interleave
Maximum Memory Module Size : (09h)512MB
Supported Speeds : (000ch)70ns 60ns
Supported Memory Types : (000ch)Standard Fast Page EDO Parity ECC SIMM
Memory Module Voltage : (02h) 3.3V Supported
Number of Associated Memory Slots : 03h
Memory Module Configuration Handle : 0008h 0009h 000ah
Enabled Error Correcting Capabilities : Other
***************MEMORY MODULE INFORMATION(TYPE6)***************
Length : 0ch
Handle : 8h
Socket Designation : DIMM1
Bank Connections : (10h)RAS# 1 , RAS# 0
Current Speed : (00h)0 ns
Current Memory Type : (0002h)
Installed Size : (7fh)Module not installed , Single Bank
Enabled Size : (7fh)Module not installed
Error Status : (00h)Uncorectable errors:None , Corectable errors:None , From the event log:None
***************MEMORY MODULE INFORMATION(TYPE6)***************
Length : 0ch
Handle : 9h
Socket Designation : DIMM2
Bank Connections : (32h)RAS# 3 , RAS# 2
Current Speed : (00h)0 ns
Current Memory Type : (0500h)DIMM SDRAM
Installed Size : (06h)64 MB , Single Bank
Enabled Size : (06h)64 MB
Error Status : (00h)Uncorectable errors:None , Corectable errors:None , From the event log:None
***************MEMORY MODULE INFORMATION(TYPE6)***************
Length : 0ch
Handle : 0ah
Socket Designation : DIMM3
Bank Connections : (54h)RAS# 5 , RAS# 4
Current Speed : (00h)0 ns
Current Memory Type : (0002h)
Installed Size : (7fh)Module not installed , Single Bank
Enabled Size : (7fh)Module not installed
Error Status : (00h)Uncorectable errors:None , Corectable errors:None , From the event log:None
***************SYSTEM SLOTS(TYPE9)***************
Length : 0dh
Handle : 0bh
Slot Designation : PCI1
Slot Type : (06h)PCI
Slot Data Bus Width : (05h)32 bit
Current Usage : (03h)Available
Slot Length : (04h)Full Length
Slot ID : 0001h
Slot Characteristics1 : (0ch)
Slot Characteristics2 :PCI Power Management Enable
***************SYSTEM SLOTS(TYPE9)***************
Length : 0dh
Handle : 0ch
Slot Designation : PCI2
Slot Type : (06h)PCI
Slot Data Bus Width : (05h)32 bit
Current Usage : (04h)In use
Slot Length : (04h)Full Length
Slot ID : 0002h
Slot Characteristics1 : (0ch)
Slot Characteristics2 :PCI Power Management Enable
***************SYSTEM SLOTS(TYPE9)***************
Length : 0dh
Handle : 0dh
Slot Designation : PCI3
Slot Type : (06h)PCI
Slot Data Bus Width : (05h)32 bit
Current Usage : (03h)Available
Slot Length : (04h)Full Length
Slot ID : 0003h
Slot Characteristics1 : (0ch)
Slot Characteristics2 :PCI Power Management Enable
***************SYSTEM SLOTS(TYPE9)***************
Length : 0dh
Handle : 0eh
Slot Designation : PCI4
Slot Type : (06h)PCI
Slot Data Bus Width : (05h)32 bit
Current Usage : (03h)Available
Slot Length : (04h)Full Length
Slot ID : 0004h
Slot Characteristics1 : (0ch)
Slot Characteristics2 :PCI Power Management Enable
***************SYSTEM SLOTS(TYPE9)***************
Length : 0dh
Handle : 0fh
Slot Designation : PCI5
Slot Type : (06h)PCI
Slot Data Bus Width : (05h)32 bit
Current Usage : (04h)In use
Slot Length : (04h)Full Length
Slot ID : 0005h
Slot Characteristics1 : (0ch)
Slot Characteristics2 :PCI Power Management Enable
***************SYSTEM SLOTS(TYPE9)***************
Length : 0dh
Handle : 10h
Slot Designation : AGP
Slot Type : (11h)AGP 4X
Slot Data Bus Width : (05h)32 bit
Current Usage : (02h)Unknown
Slot Length : (04h)Full Length
Slot ID : 0000h
Slot Characteristics1 : (0ch)
Slot Characteristics2 :PCI Power Management Enable
***************SYSTEM SLOTS(TYPE9)***************
Length : 0dh
Handle : 11h
Slot Designation : CNR
Slot Type : (06h)PCI
Slot Data Bus Width : (05h)32 bit
Current Usage : (04h)In use
Slot Length : (04h)Full Length
Slot ID : 0000h
Slot Characteristics1 : (0ch)
Slot Characteristics2 :PCI Power Management Enable
***************OEM STRINGS(TYPE11)***************
Length : 5h
Handle : 12h
Count : (02h)

Help needed from AWT GURU's

hi all
I am totally new to this AWT forum and also new to the concept. I need help in figuring out how to use this in a JSP.
1. I have used HTML so far to draw on the screen. But the problem is that it extends the screen length. I need it to find the screen.
2. Somebody said try using AWT but i am not sure how to go about it.
would appreciate some help from you AWT GURU's.
If you need the code i shall send it over after seeing your reply.
Thanks in advance

Be a bit more specific, please.
As far as I understand you by now, you want to use AWT in a JSP. I am quite sure that this will not work, as a JSP is basically a HTML page woth some Java inserted. But maybe you need to do something else...can you post some code or a more detailed description of your problem?

Audio Console Problem - Help Need

Hey everyone.
I'm having a problem here with my creative audio console. I have a Soundblaster Audigy 2 Value series. I've been using this card for about month now and everything has been working great. I've been using the latest beta drivers since i got the card and i've had no problems. I'm using the latest audio console too and it's great. I need the console for the Advanced EQ settings.
The problem is: I went into the console to change the EQ to 'rock' but when i accessed the 'EAX' tab, it was all blank, no settings, nothing. If i go to the 'speakers' tab, there is nothing to choose from also. Anyone got any idea what the problem is?
Audio works fine, just not these features.
I have had this problem occasionally before, but after a restart of windows, everything re-appears again. This time nothing is coming back after a restart.
I've tried re-installing the drivers and console, but nothing works.
Any help would be very greatly appreciated. I do love my Advanced EQ.
Here is a few screenshots of what the console looks like:
http://www.serenityindarkness.com/images/creativescrn.JPG
http://www.serenityindarkness.com/images/creativescrn2.JPG

I am thinking, the beta read me states, some audio console apps may not fuction. The only last resort thing I can think of is a 00% clean sweap. Unistall drivers and ALL media source ap
ps.
Also make sure to delete install sheild and delete C:\Program Files\Creative folder .
Use driver cleaner after you uninstall drivers also, this is to remove all reg keys.
In C:\Program Files folder you should have an installshield folder (hidden) in there are GUID named folders.
Go through them all and any that have a reference to creative, delete the folder.
Install your drivers and apps from the CD. Then update all the media source ap
ps.
Then update you driver. Do not uninstall the drivers though, just over right them and make sure to say yes to over right shared driver files.
NOTE: When you update media source apps, use the auto updater.
Before you do this though, as a test go to windows control panel and you should have audio HQ in here, open it and see if you can change EAX settings in here. If you can, then its just a bad install of media source ap
ps.
Hope this hel
ps.

Help needed from Adobe for unauthorised activity on my account

Help please!
I bought some education software from an Adobe supplier on the recommendation of my school. It turns out (without me knowing or being told when I placed the order) that I was being sold old software, at what he now claims was cost price (interesting as I subsequently bought the next version for just $30 more). I have not been able to register that software as it was the wrong version for my region, and after a month of trying I asked for a refund.
He is now accessing my account, (probably from a link in an email i sent him!!) and is trying to get the software he sold me registered so he doesn't have to refund me!
Okay, so bad enough that I have hassles with this "person" but worse that he has access to my account and I seem unable to change this.
This whole process has been a nightmare!! I need to close two open cases immediately but can't get hold of Adobe by phone or on chat!!! Help please!

You should be able to contact chat support from http://adobe.ly/yxj0t6

Calendar Problem- Help needed

Hi:
I have a google calendar but I did not use a Gmail account to set up the calendar. Instead, I used a pop account from my isp service provider- who is cogeco.ca
I am trying to sync my google calndar to my Blackberry built in calendar. I can't seet to do it.
Can someone give me the steps and the server addresses I would need to use.
Thanks so much. I appreciate your help and time.
MusicF

MusicF wrote:
Where it says "
In the Server Address field, enterhttps://www.google.com/calendar/dav/<emailaddress>/events where <emailaddress> is the Google email address.
I don't have a google/gmail address. I have an ordinary email address from my isp. That's what I am using . Is that what I should be using in this step?
Thank-you
To use Google calendar, you typically have to have a google email address, for that is what goole uses to authenticate all of their services. If your ISP has some sort of relationship with google to provide, via your ISP, some google services, then you will need to inquire with your ISP as to how to use those, for that is a rather special situation, not covered by any of the normal methods. If your ISP does not have this special relationship with google, and you wish to use google for calendar, then you would need to create a google account.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Production Problem Help Needed From GURUS

Similar Messages

Maybe you are looking for