Program Workflow Query

Thanks for reading!
As a self-taught web designer, I have always used a basic text editor to accomplish my work. I've had cloud for nearly a year and have only dabbled slightly in Adobe Muse before returning to my usual ways.
I'd really like to start getting to use the web design software, and as an animator by education, Edge Animate really appeals to me. What I am struggling with though is the basic workflow I should be adoptiong when trying to use all these programs in any particular project?
Should I be starting in Dreamweaver? I heard Muse was supposed to be a sort of brainstorming type of program so should that come first?
Say for example I am creating an inventory system using PHP and MySQL, where should I start? And would this workflow change with different genres of site, say, for example, an artist's portfolio?
I apologise if it sounds dumb, but I just don't know where to start!

Muchas gracias señora!
One question. Would I design the original layout in DW and export it to Edge Animate then back in again? Or just create the edge animate composition separately? I guess either way round is fine?
I am actually designing an inventory system in PHP/MySQL atm, most of it with textwrangler on the mac, would it be wise to import it into Dreamweaver and continue from there?
Thanks again!
P.S.
I used Muse once, it was awful

Similar Messages

Suggestions for document scanning program/workflow

I am in need of a program/workflow for scanning a variety of mixed text/image media, including books, government and financial documents, university assignments, etc., which will at minimum allow one to crop and adjust the bitonal threshold, and produce djvubind files with OCR data. I have originally used a custom bash script to implement a scanimage - GIMP - djvubind + tesseract workflow, but it was inconvenient and djvubind was buggy in integrating tesseract (despite sending a bug report that was resolved). I also tried scanimage - scantailor/scantailor-cli - djvubind + tesseract, but scantailor had editing limitations and of course the OCR bugs were still an issue. My latest approach is gscan2pdf, a program that does properly integrate with djvulibre and tesseract, but the program is very buggy and therefore painful to use on a regular basis - for example, I have to manually verify every page twice (since sometimes it does not invoke OCR on certain pages, and sometimes it does not export all pages to the djvu file).
Ideally, it would probably be possible to achieve the benefits of both automation and a plethora of editing capabilities, while reducing redundancy, by some sort of GIMP plugin/extension. Any ideas?

Hi Referee06,
Thanks for getting back to me.
I do have a few more suggestions that we can try.
If you have a firewall or anti virus protection running, try disabling them and reboot the computer. Once the computer is back on, attempt to use the Solution Center again.
If you are still having issues, try running the HP Print and Scan Doctor.
Let me know if you see any error codes or messages.
Thanks again for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Configuring and programming Workflow Events

Hi,
Please, I´m trying understand how to program workflow events.
After I´d configured the DAD, I´d configured the Global preferences to point the Web agent to http://dad address/wf/owa.
So now I want to program an event that starts a process at the workflow databases every time that an insert occurs at another database, but I don´t know how to configure the other SYSTEM and I don´t have any example of event.
If someone could help me I´ll be glad.
Tks,
Raquel

Hi,
Please check out the section Overview of the Workflow Business Event System to understand and create event/subscriptions. There is a seeded event system demonstration which may help you as well.
Cheers,
Raja

To Create an utility program for query.

Hello all,
I have a requirement where I need to develop an utility program which should create a downloadable report with more or less the following content.
System
Client
Query name
Query description
Creation timestamp
Creator
Infoset
Tables involved
If possible, we would like to know how many times they were run and when was the last time it ran.
Can you please let me know where are the queries saved? And from where can we get the details for these above mentioned fileds? ( Except system and Client).
Do feel free to add any other information you may consider relevant.
Thanks in Advance,
Rachana.

Hi ,
You can use AQGQCAT table to retrieve query details.
Further tables on query are AQG*
Hope this Helps
Nag

What are the concurrent programs or query for safe purge to claim space

I am using Apps R12.1.3 and database 11g Enterprise Edition(11.1.0.7.0) .Due to excess increase in the tablespace sizes,i want to know
What are the application tables which contains logs and unwanted information which we can purge safely without affecting user data.
And how to purge them (any query or concurrent program)?

Hi,
We discussed this many times before.
Please use the following link where you will get many (all) refereces
https://forums.oracle.com/forums/search.jspa?threadID=&q=Purge&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks

Program of query report

Hi Consultants,
I would just like to know the procedure on how would i find the program generated by the query report i've created from sqvi, and how can i make a tcode from it? Thanks!
Liezl

HI,
After creating your query you got to system (in the same screen) service- report then u can find a program for that query.
for maintaining T-code goto SE93 give ur code (Y or Z) and click on create - system will ask for program
try this
Regards

Interface Program - extraction query

Hi,
I have a requirement to extract (e.x 5 fields from table).
Query 1 :
Out of 5, for one field, i need to fetch from zcustom program (ALV output) and return back to my interface prgm . I am not sure how to proceed on this.
Pls provide your guidance on this.
Query 2 :
For the other field i need to fetch from CS15.
Please guide me on the above two queries.

Mail still routes --->
Snippet from 'showconfig' of the interface I chose to set w/ 255.255.255.255 mask:
airbus_1
10.2.3.4
Data 1
255.255.255.255
airbus_1.test.com
Mail logs, showing accept and process --- domain "boom.com" is being routed to /dev/null --- but, still routes...
Thu Feb 13 02:03:18 2014 Info: New SMTP ICID 25 interface airbus_1 (10.2.3.4) address X.Y.Z.75 reverse dns host unknown verified no
Thu Feb 13 02:03:18 2014 Info: ICID 25 ACCEPT SG UNKNOWNLIST match sbrs[none] SBRS not enabled
Thu Feb 13 02:04:01 2014 Info: Start MID 20 ICID 25
Thu Feb 13 02:04:01 2014 Info: MID 20 ICID 25 From: <[email protected]>
Thu Feb 13 02:04:13 2014 Info: MID 20 ICID 25 RID 0 To: <[email protected]>
Thu Feb 13 02:04:22 2014 Info: MID 20 Subject 'yo yo yo '
Thu Feb 13 02:04:22 2014 Info: MID 20 ready 135 bytes from <[email protected]>
Thu Feb 13 02:04:22 2014 Info: MID 20 matched all recipients for per-recipient policy DEFAULT in the inbound table
Thu Feb 13 02:04:22 2014 Info: MID 20 queued for delivery
Thu Feb 13 02:04:22 2014 Info: Delivery start DCID 0 MID 20 to RID [0]
Thu Feb 13 02:04:22 2014 Info: Message done DCID 0 MID 20 to RID [0]
Thu Feb 13 02:04:22 2014 Info: MID 20 RID [0] Response '/dev/null'
Thu Feb 13 02:04:22 2014 Info: Message finished MID 20 done
Hope this helps!
-Robert
(*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

How can I display, horizontaly the multi-fields that I programmed Content Query to pull into a subsite?

Hello all
Am using SP Online,
After doing the step by step programing found on
http://www.heathersolomon.com/blog/articles/customitemstyle.aspx
I was able to pull from a contact list the apt #, last name and first name of a contact list onto a subsite. But the information displays' vertically
Example
709
Smith
John
How can I get it to display horizontally?
709 Smith John
Thank You
Pierre
PS: for those who want to do the same, (as per many questions and blogs I have read) if you go to the link above, note that step 17 the original line of code and the one you would need is almost identical except you have to take out the forward slash
after "string" see the correct line of code (as shown on the blog below) but I missed the minor difference which of course prevented the webpart to work properly.
<property name="CommonViewFields" type="string">InternalColumnNameGoesHere,
FieldType</property>
pgg02

Hello,
the answer is in step 21 of Heather Solomon's tutorial:
Wrap HTML around the tag to format the data.
Please note!! When the page renders the CQWP, the site grabs the Item Style for each line of data. So we can't add a table and expect that each line of data will be in a row. Instead we get a full table for each line of data.
Keep this in mind as you style the HTML around the data.
You need to create the html structure and place your fields inside. To have the values show up in one row with spaces between them, place the three field calls in the same row, like
<div><xsl:value-of select="@Field1" /> <xsl:value-of select="@Field2" /> <xsl:value-of
select="@Field3" /></div>
cheers, teylyn

Workflow query

I have a requirement where in on creating a condition type in ME11, based on condition types a workflow needs to be triggered.
Each condition type will be entered by different users and the approvers will also be different. The other thing is user can also enter condition type using ME12, MEK1, MEK2 for a new inforrecord request.
For a change request, he can enter the condition types through ME12, MEK1, MEK2.
User can at any point of time recall and re-submit or give up the request. If he gives up, the wrokflow should get terminated.
I wanted to know how this can be achieved.
I was thinking of lines where in
1) Events CREATE and CHANGE to be created for a custom BOR since standard BOR does not exists.
2) Have enhance,enhancement spots/user exits in ME11/ME12/MEK1/MEK2 to trigger respective events if i cannot capture standard CREATE or CHANGE events.
Appreciate your inputs.
Regards
PN

Thanks,
So u are saying instead of an event, use FM to trigger the workflow.
There is a case when the workflow is triggered, two work items should come to initiator inbox, which allow him to either resubmit the same again, or recall the entire workflow.
I have also a case where in on rejection by approver, the workitem will come back to the initiator to change and resubmit or he can terminate.
Since i am using ZME11/ZME12 to trigger the workflow, i needed to know for the "revise and resubmit" workitem which comes back to initiator incase approver rejects, can i call the same transaction"ZMe12" on click on the revise workitem, so that the initaitor can see the details , change and resubmit in the same workflow.?
in terminate case, i presume, i will need to trigger the terminating event on the button.
Also any idea how i can maitain SWFVISU, in SAP 4.6c 6.20 since it doesnt have that transaction.
Appreciate your help.
Regards
PN
Edited by: Portal Newbie on Oct 5, 2008 10:27 AM

Urgent : Workflow Query...

Hi,
I have created one workflow by using the BOR BUS2021.
here the Request id is Key field .
i have created the 5 methods for this object with the customer name space(Y).
when i am binding the from workflow to step.the request id is not appearing in the workflow container. is there any work need to be done before the binding .
my workflow should start after executing the transaction(FIBLFFP).how can i achieve this.?

Hi manjunatha,
You need to create a Container element in the workflow container of object type BUS2021 and also make sure that Task container has the same element of object type BUS2021...
Note: A container element is already created with the same object you used in the Task
Let me know if this helps.
Thanks & regards
Srinivas

Standard program copy query?

Hi all,
I have copied the standard program pp_pick_list. This standard program consists of 7 include programs. but i cant able to open the include programs. Any clue how to open the include progams ? pl help
Regards,
sachin 11

Hi
When you copied the standard pick list program, go into the object navigator(SE80) and rename all the include with Z* and make a copy , save all of them in the same request.
Individually U should rename all the includes to z
regards
Alfred

Basic workflow query

Hi,
I am trying to test how workflow works. I have created a button in the form to initiate workflow. The workflow contains simple start --- email notification -- End. So everytime I click the button it should send email notification.

<TaskDefinition id='#ID#4CD857A30347C2E8:-3462B76:10C453E9D70:-7FF4' name='P1-WF1' lock='Configurator#1152287891764' creator='Configurator' createDate='1152224223915' lastModifier='Configurator' lastModDate='1152287591718' lastMod='94' taskType='Workflow' executor='com.waveset.workflow.WorkflowExecutor' suspendable='true' syncControlAllowed='true' execMode='sync' execLimit='0' resultLimit='0' resultOption='delete' visibility='runschedule' progressInterval='0'>
<Extension>
<WFProcess name='P1-WF1' maxSteps='0'>
<Activity id='0' name='Start'>
<Transition to='Email Notification'/>
<WorkflowEditor x='175' y='22'/>
</Activity>
<Activity id='1' name='End'>
<WorkflowEditor x='376' y='383'/>
</Activity>
<Activity id='2' name='Email Notification'>
<Action id='0' application='com.waveset.provision.WorkflowServices'>
<Argument name='op' value='notify'/>
</Action>
<Transition to='End'/>
<WorkflowEditor x='376' y='224'/>
</Activity>
<WFProcess name='process1' maxSteps='0'>
</WFProcess>
</WFProcess>
</Extension>
<MemberObjectGroups>
<ObjectRef type='ObjectGroup' id='#ID#Top' name='Top'/>
</MemberObjectGroups>
<Properties>
<Property name='editorOriginalName' value='P1-WF1'/>
</Properties>
</TaskDefinition>
Now if I initiate the workflow I should get sometext in notification.txt file as I configured the same in properties file. But after clicking I get the option for launch process and it doesn't show any process. Just wondering what needs to be configured to test simple workflow like this to start with.

Without a template or toAddress specified, i don't think any mail would be sent.
Also, how are you invoking the workflow?

Program HR_SYNC_PERSON query

Helle Experts,
On running program hr_sync_person, a warning message is generated, it reads:
'There is no address for business partner 9999999999'
Message class = R1; Message Nr = 612.
We are sync'ng our employees to BP via CP; i.e P ==> CP ==> BP.
What could be triggering this warning message.
Regards

>
Ncedile Mahlakahlaka wrote:
> Helle Experts,
>
> On running program hr_sync_person, a warning message is generated, it reads:
>
> 'There is no address for business partner 9999999999'
>
> Message class = R1; Message Nr = 612.
>
> We are sync'ng our employees to BP via CP; i.e P ==> CP ==> BP.
>
> What could be triggering this warning message.
>
> Regards
I don't know why it is referring to BP - 999999999 - but for the CP that it did it for, check the pernr than check the address infotype - 6. It uses subtype 1 (by default) to create the address on the BP. Your address may be missing for these pernrs.

5D Workflow Query

I'm trying to work out the best workflow that will allow me to import 1080P H.264 QTs shot on 5D mkII, carry out my VFX work then export the finished 1080P shots with the least amount of compression ready to conform with non VFX & online. The animation or uncompressed YUV codecs would presumably have the least or no compression but they seems to produce a large file size that is clearly unnecessary when compared to the file size of the source QT. I'm concerned however that if I use the H.264 codec even with a sufficient data rate that I could still introduce compression artefacts into my shots. I don't necessarily want to open a can or worms with codecs etc but am just looking for some advice on codecs/workflows that are working for people right now who are in the same boat.
Thanks!

Hi Dave,
Thanks for your response, I edit with Avid MC6, then once my frame ranges are confirmed I import the appropriate source QT that was shot on the 5D mkii into AE & trim my work area to the required frame range. I carry out any number & variety of VFX tasks but the actual processing speed of the application is not a major worry for me. It's when I then come to export the finished product that I am unsure about.
When you say "you may be better served by getting out of H.264 as soon a possible" I had been given some advice about creating image sequences (.exr or .dpx) from the H.264 QTs & then to use them to work with in AE to avoid further compression but I didn't really understand that at the time. So in layman's terms it sounds like AE can struggle when working with footage compressed with codecs syuch as H.264 & if the footage is converted & then imported as an image sequence instead these compression issues are irradicated as in theory there is no longer any codec in the workflow at this point, correct?
When it comes to exporting the finished shot then, to avoid an unwanted compression am I restricted to using codecs such as animation or uncompressed YUV or is there someway that I can somehow I can use a codec to try & match the true data rate of the information contained in the shot? Or once the original H.264 QT has been converted to the image sequence have I in effect reset the compression status of the shot with any previous compression artefacts now basically burnt in to the image?
These may well be basic compression questions but it's only recently that I have been required to produce shots that are to be used to online with, I've been more in the offline relm so these issues aren't as critical.
I hope I'm making sense with this.
Thanks
James

Animation workflow query

Hi!
I'm just nailing down the workflow of a short animation I'm making, and require a little bit of light shed on the situation.
The broad workflow is:
1: Each shot of the animation will be created in After Effects
2: Render a Master and an Offline version of each shot
3: Perform offline cut in FCP
4: Re-link offline cut to Master files
5: Grade in Color, send back to FCP
6: Export final mastered video
Specifically, I just want to run through the Color/onlining part of the workflow.
I was thinking the best Master version of each shot would be a tiff image sequence - but is there a better alternative re: working in Color?
Should I convert my image sequences to Pro Res 444 movies, and then use those as the Master files for sending to Color?
Presumably I could then render out a Pro Res 444 graded video from Color, then send this back to FCP for the final video with sound?
Many thanks for any help offered
Will

Depending on the speed (Bitrate) that your system can support (and your version of FCP/COLOR, but you must be on 7/1.5 if you're talking about 4:4:4:4 ProRes), the TIFF sequence might make a couple of percent difference in the final analysis -- and this might be important if you are prepping this for a film-out.
If your final deliverable is Quicktime/Web or videotape, you are wasting your time, resources and patience going the TIFF sequence route and you will find the ProRes trip far easier to manage.
Beware that you will likely encounter a lot of gamma coefficient issues no matter what route you choose.
jPo

Program Workflow Query

Similar Messages

Maybe you are looking for