Programing paradigm for dynpro enhancements via BADI

Hi Experts,
do You know programing paradigm in system for dynpro enhancements via BADI ? I must extend a dynpro with a new subscreen tabstrip via BADI. I know BADI's very well but no in relation with dynpros.
Thank You in advance
Peter

Hi,
CRM_CUSTOMER_H_BADI  / CRM_CUSTOMER_I_BADI -  To change the name of custom-defined tab in lead either in header or item level.
hope it helps.
Regards
Sidd

Similar Messages

  • Sample Code for CRM enhancement in BADI

    hi,
      can anybody please give me sample code for BADI for CRM enhancement.
    i have added couple of z field in a extract structure. now i have to write code in BADI to populate those fields.
    please do not send code for user exit.
    Regards
    Subrata

    Hi Aviral,
    Please consider below thread :
    http://scn.sap.com/thread/2069370
    Best regards - Christophe

  • Assign Investment program Position for IW31 through exit/BADI

    Hi
    My requirement is, I've to assign investment program details to Maintainence order (IW31) in creation mode through enhancement. I am able to do so in change mode using the FM "AIPP_ALLOCATE_POSITION_DARK", but when I use the same FM in creation mode it is throughing "Update Termination " error.
    Please let me know is there  any BADI/User Exit/Enhancement Point to achieve the same.
    Regards,
    Chandu
    Edited by: Poorna Chandrasekhar on Nov 13, 2009 11:10 AM

    I've created enhancement point in the FM CO_ZV_ORDER_POST

  • CRM Datasource enhancement using BADI

    Hi Guys,
    There is a lot of confusion among our BW community here about the implementation of the "CRM_BWA_MFLOW" BADI to enhance the datasources. It would be a great service is someone can clear the fog on this.
    The steps that I followed in doing this are
    1. Appended the standard datasource structure with the additional fields that need to be populated.
    2. Unhid the fields in the transaction RSA6.
    3. Created an implementation of the BADI "CRM_BWA_MFLOW" and tried to map the fields to the append structure.
    This is where I am stranded. How do we map the fields from the BDoc to the append structure fields. If someone can provide with a sample code with some documentation, that would be a great help for many of us here.
    I have earlier implemented the User exit to enahnce the datasource but it really is a big pain, especially when you know that using the BAdi can be easier.
    Really appreciate your contribtion.
    Doniv

    hi,
    sample code can be found in the BadI, somewhere go to or utility - sample code, it seems quite similar with old zxrsau01. sap gave us note 850817 when suggest using BadI for certain case, take a look :
    850817-CRM-BW: Using BDocs for the enhancements in BADi
    https://websmp103.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=012006153200000232372005
    692195-FAQ: Sales Analytics and CRM-BW data Extraction
    https://websmp103.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=012003146900000332772003

  • Enhancement or BADI for E1IDB02 IDoc segment

    I need to change some field values on the E1IDB02 segment before the IDoc is generated.  Basically, I need to clear the last 90 bytes of the record and map an IBan number for the BA partner type.  This is the source bank and generally, SAP does not populate that via standard mapping.  I there either an Enhancement or BADI that would allow me to map values in this segment?

    Hi,
    Re: User exit to modify the segment E1IDB02 data
    Regards,
    PP

  • Creating BADI for datasource enhancement in CRM system

    Hi,
    I am working on SAP BI/BW. This is the first time I am working in CRM system with CRM datasources. Facing some problem for datasource enhancement as never done it before in the CRM system. Is there anyone who can help in in creating BADI for datasource enhancement in CRM.
    Thanks in advance
    Moumita

    Hi Kushal,
    You can find the BADI name by,
    Go to Transaction SE24
    Enter the Object Type CL_EXITHANDLER and click on Display.
    Double Click on method "GET_INSTANCE".
    Put a Break-point on Call method cl_exithandler=>get_class_name_by_interface
    Run RSA3 transaction and execute the DataSource.
    The execution will stop at the break point.
    Check the values of variable 'exit_name', it will give you the BADI name called at that time.
    Thanks,
    Kokila

  • Creating BADI for datasource enhancement in CRM.

    Hi,
    I am working on SAP BI/BW. This is the first time I am working in CRM system with CRM datasources. Facing some problem for datasource enhancement as never done it before in the CRM system. Is there anyone who can help in in creating BADI for datasource enhancement in CRM.
    Thanks in advance
    Moumita

    Hi Prasad Reddy,
    This are the available badis and exits for this t.code:
    Enhancement/ Business Add-in            Description
    Enhancement
    MGA00001                                Material Master (Industry): Checks and Enhancements
    MGA00002                                Material Master (Industry): Number Assignment
    MGA00003                                Material Master (Industry and Retail): Number Display
    Business Add-in
    MG_MASS_NEWSEG                          User-Specific Fields & Segments in Mass Maintenance
    MATGRP_SKU_UPD
    CDT_CHECK_MATERIAL                      Checks for Existence of a Material in a CDT
    BADI_MM_MATNR
    BADI_MAT_F_SPEC_SEL                     BAdI for Material Special Field Selection
    BADI_MATNR_CHECK_PVS
    BADI_MATERIAL_REF                       Addition of customer-defined default data for material
    BADI_MATERIAL_OD
    BADI_MATERIAL_CHECK                     Enhanced checks for material master table
    BADI_GTIN_VARIANT
    BADI_EAN_SYSTEMATIC
    o.of Exits:          3
    o.of BADis:         11
    Find the Exact  exits and badis for ur requirement.
    How to fine the exact badi:
    1) Goto se24 (Display class cl_exithandler)
    2) Double click on the method GET_INSTANCE.
    3) Put a break point at Line no.25 (CASE sy-subrc).
    Now
    4) Execute SAP standard transaction
    5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
    6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
    7) This way you will find all the BADIs called on click of any button in any
    transaction
    Rgds,
    P.Naganjana Reddy
    if you follow this 7 steps, you will find a suitable BADI.

  • How to set screen properties for Customer fields in PO(Enhanced using BADI)

    Hi All,
    I have added one custom tab with seven fields in the PO item level using the BADI 'ME_GUI_PO_CUST  and ME_PROCESS_PO_CUST'.
    Now i want to change the screen property dynamically. According to some calculation i need to change the customer fields in display mode and change mode. when ever it is in change mode i need to set the fields as mandatory.
    How can i implement this logic using this BADI. Please help in solving this issue.
    Best regards,
    Kannan. B

    Hi,
    Try adding the code in the PBO part of your custom program used for the custom screen which you have created and added inside the BADI.
    Regards,
    Harish

  • Userexit or BADI for program *RMMRP000* for background job

    Hi,
    We are scheduling background job for MRP through SM36 using program  RMMRP000 or Through Transaction MDBT (MDBT is calling program RMMRP000) which creates PR (through background job).
    I want to default one field in PR (PO Price field in valuation tab in PR default to gross) using any userexit or BADI.
    Can any body suggest me userexit or BADI for program RMMRP000 for background job
    Regards.

    Hi,
    1. The below are the List of  Userexit for this MDBT t.CODE.
    2. But i dont see any one helping to resolve your issue.
    3. May be you should lookg at the Userexit for me21n or relevant Purhcase requisition creation transaction.
    reg
    dsk

  • HI Masters , I need information for file upload program in web dynpro java

    Hi masters,
           i need some inforamtion and documentation on file upload program in web dynpro java

    Hi surya,
    You can follow this procedure to upload the file
    i) Take One Context Attribute named as "D1" of Type "binary".
    ii) Take one FileUpload UI Element in the Layout Tab.
    iii) Bind FileUpload UI Element's data Property to the taken Context Attribute. Here it is "D1".
    iv) Take one Button UI Element in the Layout Tab named "Upload" and in the Action of that Button write the following Code.
    v) The following code Generates one Folder in the Server & inside that Folder given file is Uploaded.
    File ff=new File("FolderXYZ"); // Creates One Folder with the given Name ( Here Folder name is "FolderXYZ")
    ff.mkdir();
    try
    byte b[]=null;
    IWDAttributeInfo objAttinfo=null;
    IWDModifiableBinaryType binType=null;
    File f=null;
    FileOutputStream fos=null;
    if(wdContext.currentContextElement().getD1()!=null)
    b=wdContext.currentContextElement().getD1();
    objAttinfo=wdContext.getNodeInfo().getAttribute(IPrivateAttachView.IContextElement.D1);
    binType=(IWDModifiableBinaryType)objAttinfo.getModifiableSimpleType();
    f=new File(ff.getName()+"
    "+binType.getFileName());
    fos=new FileOutputStream(f);
    fos.write(b);
    fos.flush();
    fos.close();
    objMessageManager.reportSuccess("File uploaded to server");
    } catch (Exception e)
    objMessageManager.reportException("Unable to upload file to server, error is:"+e,false);
    return;
    The Uploaded file is stored in the folder & that folder is stored in the Server's following Path.
    <Your Server>\c$\usr\sap\J2E\JC00\j2ee\cluster\server0
    You can access your Uploaded file from the following Path
    <Your Server>\c$\usr\sap\J2E\JC00\j2ee\cluster\server0\FolderXYZ
    Regards
    Sagar Ingalwar

  • Find the package of a tcd / program, and then find enhancements

    how to find package for a tcode
    like for me21n is ME
    i want find the package for the program of any tcode and so that i can find the enhancement with the help of the package in smod
    Edited by: Julius Bussche on Feb 10, 2009 4:26 PM
    Please use meaningfull subject titles

    Hi Rahul,
    This code might be helpfull:
    report zedgar_user_exits line-size 254.                     "100.
    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir,tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    data: l_prog like rs38l-include.
    parameters: p_tcode like tstc-tcode. " OBLIGATORY.
    parameters: p_actv as checkbox default 'X',
                p_sum as checkbox.
    start-of-selection.
      select single * from tstc where tcode eq p_tcode.
      if sy-subrc eq 0 or p_tcode is initial.
        if not p_tcode is initial.
          select single * from tadir where pgmid = 'R3TR'
                                       and object = 'PROG'
                                       and obj_name = tstc-pgmna.
          move : tadir-devclass to v_devclass.
          if sy-subrc ne 0.
            select single * from trdir where name = tstc-pgmna.
            if trdir-subc eq 'F'.
              select single * from tfdir where pname = tstc-pgmna.
              select single * from enlfdir where funcname = tfdir-funcname.
              select single * from tadir where pgmid = 'R3TR'
                                           and object = 'FUGR'
                                           and obj_name eq enlfdir-area.
              move : tadir-devclass to v_devclass.
            endif.
          endif.
          select * from tadir into table jtab
                            where pgmid = 'R3TR'
                            and object = 'SMOD'
                            and devclass = v_devclass.
        else.
    *      SELECT * FROM TADIR INTO TABLE JTAB
    **                      WHERE pgmid = 'R3TR'
    *                       WHERE OBJECT = 'SMOD'.
    **                      AND devclass = v_devclass.
          select * from modsapt
                  where sprsl = sy-langu.
            jtab-obj_name = modsapt-name.
            append jtab.
          endselect.
        endif.
        select single * from tstct where sprsl eq sy-langu and
                                   tcode eq p_tcode.
        format color col_positive intensified off.
        if p_sum is initial.
          write:  /(19) 'Transaction Code - ', 20(20) p_tcode,
                 45(50) tstct-ttext.
          skip.
        endif.
        if not jtab[] is initial.
          if p_sum is initial.
            write:/(95) sy-uline.
            format color col_heading intensified on.
            write: /1 sy-vline, 2 'Exit Name', 21 sy-vline ,
                   22 'Description', 95 sy-vline.
            write:/(95) sy-uline.
          endif.
          loop at jtab.
            select single * from modsapt
                    where sprsl = sy-langu and
                    name = jtab-obj_name.
            format color col_normal intensified off.
            if p_actv is initial.
              write:/1 sy-vline, 2 jtab-obj_name hotspot on,
                          21 sy-vline , 22 modsapt-modtext, 95 sy-vline.
            endif.
            tables: modsap.
            data: l_1.
            clear l_1.
            select * from modsap where name = jtab-obj_name
                                   and typ = 'E'.
              if p_actv is initial.
                select single * from tfdir where funcname = modsap-member.
              else.
                select single * from tfdir where funcname = modsap-member
                                             and mand = 'C'.
              endif.
              if sy-subrc eq 0.
                if l_1 is initial.
                  l_1 = 'X'.
                  if p_sum is initial.
                    if not p_actv is initial.
                      write: /1 sy-vline, 2 jtab-obj_name hotspot on,
                             21 sy-vline , 22 modsapt-modtext, 95 sy-vline.
                      clear l_prog.
                      hide l_prog.
                    endif.
                  endif.
                endif.
                data: l_foi like modsap-member.
                l_prog = tfdir-pname+4.
                concatenate 'L' l_prog 'U' tfdir-include into l_prog.
                data: tab_prog type table of d022s with header line.
                clear tab_prog[].
                data: tab_prog2 type table of d022s with header line.
                clear tab_prog2[].
                call function 'RFC_READ_REPORT'
                     exporting
                          program = l_prog
                     tables
                          qtab    = tab_prog
                     exceptions
                          others  = 1.
                clear l_prog.
                loop at tab_prog.
                  if tab_prog-line cp '*INCLUDE*'.
                    replace 'INCLUDE' with '' into tab_prog-line.
                    replace '.' with '' into tab_prog-line.
                    shift tab_prog-line left deleting leading space.
                    write tab_prog-line to l_prog.
                    call function 'RFC_READ_REPORT'
                         exporting
                              program = l_prog
                         tables
                              qtab    = tab_prog2
                         exceptions
                              others  = 1.
                    loop at tab_prog2.
                      if tab_prog2-line eq space
                         or tab_prog2-line cp '#**'.
                        delete tab_prog2.
                      endif.
                    endloop.
                    if not tab_prog2[] is initial.
                      write: /  sy-vline,
                             21 sy-vline,
                                modsap-member,
                             50 l_prog hotspot on intensified,
                             95 sy-vline.
                      hide l_prog.
                      tables: tftit.
                      clear tftit.
                      select single * from tftit where spras = sy-langu
                                            and funcname = modsap-member.
                      if sy-subrc ne 0.
                        select single * from tftit where spras = 'EN'
                                             and funcname = modsap-member.
                        if sy-subrc ne 0.
                          select single * from tftit where spras = 'DE'
                                           and funcname = modsap-member.
                        endif.
                      endif.
                      write: tftit-stext.
                      l_foi = modsap-member.
                    endif.
                    exit.
                  endif.
                endloop.
                if l_foi ne modsap-member and p_actv is initial.
                  l_foi = modsap-member.
                  write: /  sy-vline,
                         21 sy-vline,
                            modsap-member color col_negative,
                         50 l_prog hotspot on intensified,
                         95 sy-vline.
                  hide l_prog.
                  clear tftit.
                  select single * from tftit where spras = sy-langu
                                        and funcname = modsap-member.
                  if sy-subrc ne 0.
                    select single * from tftit where spras = 'EN'
                                         and funcname = modsap-member.
                    if sy-subrc ne 0.
                      select single * from tftit where spras = 'DE'
                                       and funcname = modsap-member.
                    endif.
                  endif.
                  write: tftit-stext color col_negative.
                endif.
              endif.
            endselect.
          endloop.
          if p_sum is initial.
            write:/(95) sy-uline.
            describe table jtab.
            skip.
    *        FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    *        WRITE:/ 'No of Exits:' , SY-TFILL.
          endif.
        else.
    *      IF P_SUM IS INITIAL.
    *        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    *        WRITE:/(95) 'No User Exit exists'.
    *      ENDIF.
        endif.
    *  ELSE.
    *  ENDSELECT.
    *    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    *    WRITE:/(95) 'Transaction Code Does Not Exist'.
      endif.
    at line-selection.
      get cursor field field1.
      if field1(4) eq 'JTAB' and p_sum is initial.
        set parameter id 'MON' field sy-lisel+1(10).
        call transaction 'SMOD' and skip first screen.
      else.
        if not l_prog is initial.
          set parameter id 'RID' field l_prog.
          data begin of bdcdata occurs 100.
                  include structure bdcdata.
          data end of bdcdata.
          data begin of itab occurs 10.
                  include structure bdcmsgcoll.
          data end of itab.
          clear: bdcdata[], bdcdata.
          clear: bdcdata.
          bdcdata-program  = 'SAPMS38E'.
          bdcdata-dynpro   = '0100'.
          bdcdata-dynbegin = 'X'.
          append bdcdata.
          clear: bdcdata.
          bdcdata-fnam     = 'RS38M-PROGRAMM'.
          bdcdata-fval     = l_prog.
          append bdcdata.
          clear: bdcdata.
          bdcdata-fnam     = 'BDC_OKCODE'.
          bdcdata-fval     = '=SHOP'.
          append bdcdata.
          call transaction 'SE38'  using bdcdata  mode 'E'
                                   messages into itab.
        endif.
      endif.
    regards,
    Edgar

  • Influence tiles on launchpad via BAdI

    Hello,
    is it possible to influence the tiles that are shown on the Fiori launchpad via BAdI implementation? We want to maintain the fiori groups and tiles in/for one PFCG role and then remove tiles depending on specific business process / organizational settings.
    In NWBC, you can use BAdI definition *NWBC*RUNTIME* to influence the PFCG data, is there anything comparable for the Fiori launchpad?
    Thanks & regards
    Wolfgang

    Dear Siddharth Rajora,
    I have the impression that manager desktop is "phased out", and furthermore, I am not using MSS. I want to design a homepage to group some of my custom Web Dynpro applications, and am thinking to use lpd_cust along with the application APB_LAUNCHPAD to display the page. Is it a must that I have to use Manager Desktop in order to fullfil my requirement ? Thank you.
    Regards
    Kir Chern

  • Screen data handling in Screen Enhancement with BAdI's ?

    Hi all,
    I'm trying to build a Screen Enhancement with (new) BAdI concept.
    But now I'm having a Problem. The new BAdI's don't allow variable Attributes  (instance/static attribute) in the BAdI Interface.
    If I try to define an instance or static Attribute for the BAdI-Interface I get the following error message:
    "BAdI interface <my_badi_if> contains non-constant attributes "
    In my Screen Enhancement I have build a Subscreen with new fields in it. These field data couldn't be saved in the BAdI class (e.g. via BAdI-methods my_badi->get_data_from_screen... and my_badi->put_data_on_screen...) because having no attributes.
    How these screen-data could be handled without BAdI-Interface-Attributes?
    Thanks in advance,
    Anja

    Having the same service to get one product price as well as all product prices would not be recommended. Two separate services would be more reasonable
    Mass data handling in SOA is not entirely different than let's say in BAPI/RFC environment. parallelism, multi-threading, locking, commit and many others are typical elements of considerations.
    From a scalability standpoint, you can always be interested in how optimal its performance is whether you call it once or a million times. If the service is a rather slim one (lightweight in terms of number and types of parameters as well as processing code), you'll surely have better chance than with a service that's heavyweight.

  • Addition of the tab in the PO Create / Change using ME21N/ME22N Via BADi.

    Hi All,
    I am trying to add an additional tab in the scree of the Transacton ME21N / ME22N at the Item Level. The Label  of the tab is 'Test123'.
    I have already created a Separate screen ZTEST1_111 Dynpro 0100 and have a box with two input fields and the twp radio buttons
    and a Push button.
    I have Created the Implementation of the BAdi ME_GUI_PO_CUST and have Written the code inside the Method Suscribe where I have put in the code as follows:
    wa_susc-name = 'BOX1'.
    wa_susc-program = 'ZTEST1_111'.
    wa_susc-dynpro = '0100'.
      wa_susc-STRUCT_NAME = 'ZMEPO_BADI_STRUCT1'.
      wa_susc-label = 'Test123'.
    wa_susc-position = 5.
    wa_susc-height = 7.
    append wa_susc to RE_SUBSCRIBERS.
    I have also written some piece of code to the other methods as well.
    Please do let me know where have I gobe wrong. why there is no result inspite of doing the right coding.
    Am I missing on something...?
    Please guide me the right way..? If in case I need to do anything more..?
    Regards,
    Deepak.

    Hi,
    You have to implement ME_PROCESS_PO_CUST for this.
    method if_ex_me_process_po_cust~fieldselection_item this method enables you to influence the field selection properties for a field.
    By making changes to this table CH_FIELDSELECTION - Field selection table, you can influence the display properties of a field.
    it has following for selection status
    '-'   Field is suppressed
    *''   Field is purely a display field
    '.'   Input field
    '+'  Mandatory field.
    Hope this helps.
    Regards,
    Pawan

  • BAPI enhancements Vs BADI

    Hi All,
      Can any one explain me briefely, what is the relation between 'BAPI enhancements' and 'BADI'?
    Thanks
    naveen

    BADI is just an object-oriented version of user-exit. Instead of entering program code into some function module (as in customer-exit), you define some class which has to implement predefined methods and those methods are fired at predefined points just like an old user-exit. Some BADI can have multiple independent implementations which is much better for software deployment as several developers can implement the same BADI independently.

Maybe you are looking for