ProgressBar component

Hi all, I have the following code attached to a progressbar
component and doesnt work.
I get the final position only (100%).
Note that I put the mode to "manual".
What did I miss?
Thanks in advance

Check with the following tutorial and know how to remove the progress bar after its loaded the image:
http://www.republicofcode.com/tutorials/flash/as3loader/

Similar Messages

  • Implementing reusable Progressbar component

    hello,
    I want to make a ProgressBar that is Reusable, that is once developed, it
    should simply be reusable with any other applications which may require this
    functionality.
    The ProgressBar Component that i want to develop should include the
    following functionalities:
    1. It should show the progress as a Percentage.
    2. it should also show me the total bytes that have been transferred so far,and
    calculate and show me the remaining bytes left so far to transfer(I want this
    feature as i am going to use this progressbar in file uploading)
    3. it should also show me the total file uploading time required,time elapsed so
    far and the total time left to upload the file.
    Can anyone help as regards the above tasks?
    Any help would be dearly appreciated...
    Thanks in anticipation
    sd

    Thanks, Mr Dylen for the Link u gave me, but i had already gone thru that,
    what i basically wanted to know was how to implement this ProgressBar as
    a Reusable Component in such a way that it can be simply merged with any other application, that might need a similar functionality.
    Once again i say, i want to develop it as a Independent Module, so that it
    can be merged with any other application.
    Secondly, that Link which u gave and which (i had gone thru already before u gave me) doesn't specify anything about how to calculate bytes transferred, bytes received,bytes remaining, time elapsed,time left etc...
    the issues which i raised in my 2nd and 3rd points(if u read my query carefully).
    so where and how do i get the code for my above functionality?
    so i am still looking forward to a complete response to my same earlier query.
    I hope u r able to help..
    sorry to bother u again on the same question...but the above is what i basically needed.
    I"ll be eagerly looking forward to your response once again..with the above
    queries.
    Regards
    Thanks in anticipation
    sd

  • ProgressBar Component and Streaming Video

    Is it possible to connect the ProgressBar component to an
    FLVPlayback component which is streaming?

    Unless the video is completely downloaded to the iMac you can not rule out the Internet connection.
    Since it plays all other video with no problem the downloading stream would seem to be the source of the problem.
    I had cable modem and it is no guarantee of a fast connection. Also even having a fast connection on one end doesn't mean that the source of the video is pushing it all that fast.

  • Changing the ProgressBar component

    Hello there, I was just wondering, is there a way to change the way the ProgressBar component looks like? for example I'd like to keep its functionality but change its progress bar to a circular animation maybe?
    Any help would be so much appreciated. Thanks in advance!

    Make your animation inside of a movie clip. Go to main timeline. Put an instance of the ProgressBar on stage. Click to highlight. In your Parameters panel, change mode to Manual. Enter ProgressBar. Place your animation on frame 1 of the top most layer.
    (Optional)
    Delete out the other layers in the ProgressBar. In the Library, in the Component Assets folder, delete the ProgressBarSkin folder.

  • Generating ProgressBar component at runtime.

    Hi All,
    I have the requirement of generating the ADF Components at runtime. One of which is af:Progressbar.
    I have written the code in the Managedbean to generate the same.
                    ProgressIndicatorBean pgIndicatorBean =
                        new ProgressIndicatorBean();
                    RichProgressIndicator richProgressIndicator =
                        new RichProgressIndicator();
                    richProgressIndicator.setId("pi" + i);
                    //Setting up the BoundedRangeModel as the value to the progressbar
                    richProgressIndicator.setValue(pgIndicatorBean);
                    The code below is for the ProgressIndicatorBean which extends the bounded range model
       * Determinate state model set at 50%.
      public class ProgressIndicatorBean extends BoundedRangeModel
        public long getMaximum()
          return 2;
        public long getValue()
          return 1;
      }When the page is loaded I get the following message in the console and the progressbar is not displayed.
    <ProgressIndicatorRenderer$ProgressIndicatorModel> <<init>> Invalid model provided to progressIndicator (should be a BoundedRangeModel); progressIndicator ID: pi0.Please suggest or point to some documentation on generating the progress bar indicator(programatically) at runtime.
    Thanks,
    Shiva.

    See if changing the superclass to DefaultBoundedRangeModel helps
    public class ProgressIndicatorBean extends BoundedRangeModel

  • Using the progressbar component in AS 2

    hey all,
    i'm playing around with the progress bar component included
    in CS3 and am a bit stuck.
    the tutorials i've read that discuss using this component
    don't explain how to use it to target the nested movie clip it's
    contained in. one tutorial i found says to use _root as the source,
    but it drills up to the parent.
    how can i get around this?

    i don't know, are you sure it's not alt+f4?

  • Use the ProgressBar component

    This question was posted in response to the following article: http://help.adobe.com/en_US/as3/components/WS5b3ccc516d4fbf351e63e3d118a9c65b32-7fa4.html

    You give the easiest example.
    The example uses bytesTotal of the Sound object.
    Video, text and images don't have the bytesTotal.
    How do I detect all screen objects and do it for a page transition? ie. Like your first example except for going from one page to another with any media type

  • How to add one component when some action take place

    Hi,
    i created a GUI using Netbeans Ide, In that i want add a component when i click some button
    i showed it here see the diagram
    [click here to see|http://www.mediafire.com/imageview.php?quickkey=jtgzjrfenwm]
    my sample code
    public class ProcessFiles1 extends javax.swing.JFrame implements ActionListener,
                                                        PropertyChangeListener{
        private JProgressBar progressBar;
        / Creates new form ProcessFiles1 */*
    *    public ProcessFiles1() {*
    *        initComponents();*
    *    /** This method is called from within the constructor to
    *initialize the form.*
    WARNING: Do NOT modify this code. The content of this method is
    *always regenerated by the Form Editor.*
        @SuppressWarnings("unchecked")
        // <editor-fold defaultstate="collapsed" desc="Generated Code">
        private void initComponents() {====================================>here i am not adding Progress bar
                                                                                                                             to GUI
            jToggleButton1 = new javax.swing.JToggleButton();
            jToggleButton2 = new javax.swing.JToggleButton();
            jComboBox1 = new javax.swing.JComboBox();
            jLabel1 = new javax.swing.JLabel();
            jLabel2 = new javax.swing.JLabel();
            jComboBox2 = new javax.swing.JComboBox();
            jScrollPane1 = new javax.swing.JScrollPane();
            jTextArea1 = new javax.swing.JTextArea();
            setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
            setTitle("Admin@localhost");
            setIconImage(Toolkit.getDefaultToolkit().getImage("c:\\Logo.PNG"));
            jToggleButton1.setText("Select File");
            jToggleButton1.addActionListener(new java.awt.event.ActionListener() {
                public void actionPerformed(java.awt.event.ActionEvent evt) {
                    FileChooser(evt);
            jToggleButton2.setText("Run Files");
            jToggleButton2.addActionListener(new java.awt.event.ActionListener() {
                public void actionPerformed(java.awt.event.ActionEvent evt) {
                    addComp(evt);
            jComboBox1.setModel(new javax.swing.DefaultComboBoxModel(new String[] { "Item 1", "Item 2", "Item 3", "Item 4" }));
            jComboBox1.addActionListener(new java.awt.event.ActionListener() {
                public void actionPerformed(java.awt.event.ActionEvent evt) {
                    jComboBox1ActionPerformed(evt);
            jLabel1.setText("Success");
            jLabel2.setText("Faild");
            progressBar = new JProgressBar(0, 100);
            progressBar.setValue(0);
            progressBar.setStringPainted(true);
            jComboBox2.setModel(new javax.swing.DefaultComboBoxModel(new String[] { "Item 1", "Item 2", "Item 3", "Item 4" }));
            jTextArea1.setColumns(20);
            jTextArea1.setEditable(false);
            jTextArea1.setRows(5);
            jScrollPane1.setViewportView(jTextArea1);
            javax.swing.GroupLayout layout = new javax.swing.GroupLayout(getContentPane());=================>from here i am adding components
            getContentPane().setLayout(layout);
            layout.setHorizontalGroup(
                layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
                .addGroup(layout.createSequentialGroup()
                    .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
                        .addGroup(layout.createSequentialGroup()
                            .addGap(26, 26, 26)
                            .addComponent(jScrollPane1, javax.swing.GroupLayout.PREFERRED_SIZE, 965, javax.swing.GroupLayout.PREFERRED_SIZE))
                        .addGroup(layout.createSequentialGroup()
                            .addContainerGap()
                            .addComponent(jToggleButton1)
                            .addGap(18, 18, 18)
                            .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
                                .addComponent(jToggleButton2)
                                .addGroup(layout.createSequentialGroup()
                                    .addComponent(jLabel1)
                                    .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.UNRELATED)
                                    .addComponent(jComboBox1, javax.swing.GroupLayout.PREFERRED_SIZE, 155, javax.swing.GroupLayout.PREFERRED_SIZE)
                                    .addGap(32, 32, 32)
                                    .addComponent(jLabel2)
                                    .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                                    .addComponent(jComboBox2, javax.swing.GroupLayout.PREFERRED_SIZE, 151, javax.swing.GroupLayout.PREFERRED_SIZE)))))
                    .addContainerGap(29, Short.MAX_VALUE))
            layout.setVerticalGroup(
                layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
                .addGroup(layout.createSequentialGroup()
                    .addContainerGap()
                    .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE)
                        .addComponent(jToggleButton1)
                        .addComponent(jComboBox1, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE)
                        .addComponent(jLabel1)
                        .addComponent(jLabel2)
                        .addComponent(jComboBox2, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE))
                    .addGap(26, 26, 26)
                    .addComponent(jToggleButton2)
                    .addGap(18, 18, 18)
                    .addComponent(jScrollPane1, javax.swing.GroupLayout.PREFERRED_SIZE, 583, javax.swing.GroupLayout.PREFERRED_SIZE)
                    .addContainerGap(20, Short.MAX_VALUE))
            pack();
        }// </editor-fold>
    private void addComp(java.awt.event.ActionEvent evt)---------------------------------------->when 'runfile' button clicked i am
                                                                                      trying to add progressbar component it is not adding
           layout.addLayoutComponent("Progress", progressBar);
           pack();
         }how can i add progressbar when runfile button clicked
    please any one focus some light on this
    Thanks in advance,
    Nagaraju.
    Edited by: uppala on Dec 18, 2009 11:33 AM

    Well, normally the code would be:
    panel.add( someComponent );
    panel.revalidate();But since you are using the IDE to generate your code you need to learn and understand how to use the GroupLayout and all its constraints to add the component.
    My advice is to get rid of the IDE generate code and create the GUI yourself.

  • ProgressBar from NetBeans Palette doesn't display in IE

    Hi,
    I am using the Java Visual Web ServerFaces framework, which comes bundled with NetBeans. this includes a Palette of drag-n-drop components, including a progress bar.
    the progress bar works correctly in firefox. In IE, it shows as a thin line in the upper left corner, which has a "progress bar" tooltip if you mouse over it.
    how can i get a nice progress bar to show in IE??
    many thanks!

    thanks for the tip. the palette component Layout Panel let me place the progress bar where i wanted.
    BUT, the progress bar still doesn't work! the bar displays no progress.
    either i'm doing something really wrong, or everyone must be running into this problem-- i am simply using the "progressBar" component that comes bundled with NetBeans.
    thanks for the help :-)

  • A question with ProgressBar in FLEX 3

    Hi ,
    I am trying to work with the examples of ProgressBar from FLEX 3 .
    I saw an example where the source of an progressBar is data.progress and there is no component with the id as data .
    similar to this :
    <mx:ProgressBar id="MYPB" source = "{data.progress}"/>
    Can anybody please throw a light on this .
    Thanks in advance .

    The source of a progress bar can be any instance of a class that dispatches the ProgressEvent. It can be Image, SWFLoader, FileReference or your own class.
    The RemoteObject class for example does not dispatch this event (you can only know when there is a result or an error), so you cannot use it as the source of a ProgressBar component in event or polled mode.

  • URGENT : Progress Bar component start showing too late

    I'm using the ProgressBar component in a large movie
    containing a lot of objects, images ecc ...
    In the first frame i've put a ProgressBar component managed
    by the following ActionScript code :
    stop();
    listener = {path:this};
    listener.complete = function()
    this.path.play();
    pr_main.mode = "polled";
    pr_main.source = _root;
    pr_main.addEventListener("complete", listener);
    where pr_main is the instance name of the ProgressBar.
    Well, when i try to simulate Download, i have to wait like
    4-5 seconds for the bar to appear and when it happens, the bar
    shows that the loading is already at about 50%, and after it starts
    to work correctly.
    Why i'm experiencing this behaviour ?
    Thanx to all

    >>In the first frame i've put a ProgressBar component
    That's the problem. To use the component is has to first
    fully load.

  • ProgressBar on Flex Mobile? Howto?

    I feel like an idiot asking this, but is there really no official way to put a ProgressBar component on a Flex Mobile project, even up to version 4.5.1?  The documents seem to indicate as such, as Spark still has no ProgressBar equivalent, and mobile is Spark-only.
    Maybe there is a 3rd party progress bar out there somewhere?
    I'm currently trying to hack the Flash Pro CS5.5 fl.controls.ProgressBar into my Flash Builder project through an SWC, which is just plain dirty, since Adobe seems to have purposely made the Flex-side interfaces incompatible between Pro and Builder (eg, fl.controls instead of mx.controls).
    What gives?  It can't seriously be this involved to put a progress bar on a mobile Flex project... I feel like I'm in Bizarro-world...

    If anybody is curious, this is the procedure to hack a Flash Pro ProgressBar displaying in a Flex Mobile app (specifically an iOS project)... if anybody has a better way to get a progress bar, I'm all ears!
    Flash Pro CS5.5:
    Open Flash Pro CS5.5, create a new ActionScript 3.0 FLA (not an iOS or Android FLA)
    Open the Component window, and drop a ProgressBar onto your stage
    Note that you now have a ProgressBar and several related classes in your Library
    Save your FLA, and then configure it to publish as an SWC.  In the ActionScript 3.0 settings, remove the textLayout library altogether (mixing textLayout libraries tends to cause very strange compile and runtime errors).
    Publish that SWC
    Flash Builder 4.5.1:
    Open FB 4.5.1.  Create a new MXML inside a Flex Mobile project - I was using a Spark View.
    In your Project libraries, add the SWC we just created
    Also, in your Project libraries, add the SWC Folder: ${FLASHPRO_APPCONFIG}/ActionScript 3.0/libs
    FLASHPRO_APPCONFIG should be configured in Prefererences | General |  Workspace | Linked Resources as the Common/Confuguration/ subdirectory  of your Flash Pro CS5.5 application directory
    Appropriately add: xmlns:controls="fl.controls.*"
    Inside the fx:Declaration, add:<controls:ProgressBar id="progress_bar" barSkin="ProgressBar_barSkin" indeterminiteSkin="ProgressBar_indeterminiteSkin" trackSkin="ProgressBar_trackSkin" direction="right" height="20" width="200" ?>
    Outside the fx:Declaration, add:<s:SpriteVisualElement id="progress_bar_container" x="100" y="200" height="20" width="200" />
    Inside an event handler or some other instance code (the creationComplete handler works for testing), add the following code:progress_bar_container.addChild( progress_bar );
    The ProgressBar does not show up in the designer, but it does show up at runtime :).  This was the first code I was able to get working.
    The other promising lead was to use the FlashComponentPlaceholder object instead of SpriteVisualElement (called the "Flash Professional Component" in the Component browser in Flash Builder), but because Adobe changed the package names from mx to fl as I mentioned above, this resulted in incompatible interfaces at runtime (between the two versions of IUIComponent).  This probably could be solved by writing an adapter class, but that seemed like a bit of extra code for no gain compared to what I have above.
    Also, I haven't tried it, but I'm fairly certain you could use this  procedure to get any of the MX controls available in Flash Pro into a  Flex Mobile project... I wonder what's with this artificial restriction?

  • HELP !! ProgressBar showing too late

    (SORRY FOR MY CROSS-POSTING, BUT I NEED URGENT HELP FROM ANY
    OF YOU !!!)
    i'm using the ProgressBar component in a large movie
    containing a lot of objects, images ecc ...
    In the first frame i've put a ProgressBar component managed
    by the following ActionScript code :
    stop();
    listener = {path:this};
    listener.complete = function()
    this.path.play();
    pr_main.mode = "polled";
    pr_main.source = _root;
    pr_main.addEventListener("complete", listener);
    where pr_main is the instance name of the ProgressBar.
    Well, when i try to simulate Download, i have to wait like
    4-5 seconds for the bar to appear and when it happens, the bar
    shows that the loading is already at about 50%, and after it starts
    to work correctly.
    Why i'm experiencing this behaviour ?
    Thanx to all

    >>In the first frame i've put a ProgressBar component
    That's the problem. To use the component is has to first
    fully load.

  • ProgressBar for FLV

    Does the ProgressBar component works with a flv file that I
    load into a MediaDisplay component?
    Does anybody know a tutorial?
    Thnx!

    Another way might be to display an animated gif ofa
    progress bar moving or a spinner moving
    'round-n-'round whilst the file is being uploaded.You mean, just like a JProgressBar would do? ;)Rene, I was referring to several threads as such:
    http://forum.java.sun.com/thread.jspa?threadID=135936&messageID=363829

  • ProgressBar Tutorial

    In the progressbar turorial the percentage property of the Progressbar component is bound to a Session bean property for an example. It is fine ! It is working !
    But, if I want to show a progressbar till a database search is completed, which can I bind to the percentage property?
    Thanks.

    So far, we do not have a setting for this, because JDBC does not let you find out the progress of a query.
    But this is a known use case which we can look into as an enhancement for the progress bar. Thanks!

Maybe you are looking for