PROJ-ERDAT does not exist as selection field

Hi,
Created on is not part of the field selection for Project Systems reports. The field ERDAT does not exist in structure PROJR therefor running program RCNCT000 to generate the selection fields does not add the field to the selection.
How do I add the field to the selection fields?
Thanks

Hi,
this must be translation issue.
Create break point at SSFRT_WRITE_ERROR function module and perform print preview
- here You can find all errors, warnings - if You check call stack, You will find which node causes error.
Regards,
Przemysław

Similar Messages

Field ZZBUDAT is delta-relevant, but does not exist in the field list

Hi All,
I have created a Generic DataSource on a View.Now there is a situation ,i need to add a Date field form some other table.
So i have enhanced the datasource now that date is coming in my datasource.
But when i tried to make delta on that date field its showing error-
Field ZZBUDAT is delta-relevant, but does not exist in the field list
Message no. R8279
Diagnosis
The DataSource uses field ZZBUDAT for specifying the delta. In the DataSource field list, however, the field does not occur
Now how i can make this field dalta relevant?
Thanks,
Piyush

Piyush,
I think the message in SAP is quite clear....
If the field ZZBUDAT does not exist in the view ... how do you expect the datasource to know which records have changed...?
The delta relevant field SHOULD be in the view - else there is no way the extractor can identify the changed records ...
Please remember that the Generic extractor is a simple select statement with a where clause on the delta relevant field and nothing else ... if you want the changed on field to come from another table - then you need to write a function module extractor to do this...
The order of processing is that - the view fields are processed first - then the enhanced fields are processed followed by the user exits...

Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.

Hello,
Suddenly the working CRM is being stopped for some group of users.
I drilled down to the issue and have checked that the users from Domain in which CRM is installed are having CRM access.
But for other domain user having problem to access CRM.
I tried to add a user from a domain which is not of CRM domain then it gives following error.
"Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.
<Message>LookupAccountNameW failed with error</Message> "
The change is made - AD group have upgraded Activer Directory server to 2012 R2
Please help as the Production CRM is not working for other domain user.

We have Activer Directory Structure like below.
One Root Domain says A
and there are multiple child domain like B,C,D etc...
B,C and D are all in same level,they are child of A domain.
There are two way transitive trusts between A and all the child Domain.
But there is no trust in between B and C and so on.
Our CRM server is in B domain and B domain's user can access CRM but users of Domain C,D and so on can not access CRM.
If this post answers your question, please click "Mark As Answer" on the post and "Mark as Helpful"

XML mapping error table or view does not exist

Hi Friends,
I am using ODI 11g.
I am facing a error while working on XML to ORACLE mapping,
My source table name is Employee and Target table name is Copy Of Employee.I dont hv any join condition.
ORA-00942: table or view does not exist
and
select     SYS_GUID(),
     2883011,
     rowid,
     'F',
     *'ODI-15065: Join error (TABLE__EMPLOYEE) between the table Copy of EMPLOYEE and the table TABLE_.',*
*     sysdate,*
*     '(237011)ODI_Test.INT_XML_TEST',*
*     'TABLE__EMPLOYEE',*     'FK',
     EMPLOYEEORDER,
     EMPLOYEE_KEY,
     EMPLOYEE_KEYORDER,
     HIRE_DT,
     HIRE_DTORDER,
     MGR_ID,
     MGR_IDORDER,
     MGR_NAME,
     MGR_NAMEORDER,
     NAME,
     NAMEORDER,
     POSTN,
     POSTNORDER,
     SVISOR_ID,
     SVISOR_IDORDER,
     SVISOR_NAME,
     SVISOR_NAMEORDER,
     TABLE_FK,
     TYPE_,
     TYPE_ORDER
from     EDGE_DEV_OWNER."I$_Copy of EMPLOYEE" EMPLOYEE
where      (
          EMPLOYEE.TABLE_FK
     ) not in      (
          select      TABLE_PK
          from      EDGE_DEV_OWNER.TABLE_
and     (
          EMPLOYEE.TABLE_FK is not null
Please suggest how to resolve this.
Thanks,
Lony

HI Ksbabu,
i am getting this error
oracle.odi.runtime.agent.invocation.InvocationException: object name already exists: EDGE_DEV_OWNER_RESULTS in statement [create table EDGE_DEV_OWNER_RESULTS(RESULTSPK NUMERIC(10) NOT NULL, SNPSFILENAME VARCHAR(255) NULL, SNPSFILEPATH VARCHAR(255) NULL, SNPSLOADDATE VARCHAR(255) NULL)]
     at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.invoke(RemoteRuntimeAgentInvoker.java:265)
Thanks,
Lony
8886446166

ORA-02149: Specified partition does not exist

ORA-31693: Table data object "aaaa"."bbbbb":"P_2012112216" failed to load/unload and is being skipped due to error:
ORA-02149: Specified partition does not exist
SQL> select partition_name from dba_tab_partitions where table_name=‘DME_bbbbb_RES’ and TABLE_OWNER=aaaa;
no rows selected
请问一下是什么原因造成的．

数据库版本 10.2.0.1
用数据泵导出的时侯报ORA-02149: Specified partition does not exist
nohup expdp \'/ AS SYSDBA\' directory=DATADUMP SCHEMAS=aa dumpfile=EXPDP_aa_%u.dmp logfile=EXPDP_WIPNMS.log parallel=4 exclude=STATISTICS &

The contained field name "ADTAGR" does not exist in any of the database tab

hı all
how can l solved thıs problem
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "PUT_QMFECAT" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An Open SQL clause was specified dynamically. The contained field name
"ADTAGR" does not exist in any of the database tables from the FROM clause.
Information on where terminated
    Termination occurred in the ABAP program "SAPDBZQNQ" - in "PUT_QMFECAT".
    The main program was "ZQMR_BILDIRIM ".
    In the source code you have the termination point in line 732
    of the (Include) program "SAPDBZQNQ".
Error occurred during batch input processing
    The termination is caused because exception "CX_SY_DYNAMIC_OSQL_SEMANTICS"
     occurred in
    procedure "PUT_QMFECAT" "(FORM)", but it was neither handled locally nor
     declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPDBZQNQ "; its source code begins in line
    715 of the (Include program "SAPDBZQNQ ".
FORM put_qmfecat.
DATA: l_tab_fields TYPE rsfs_tab_fields.
DATA: l_ds_clauses TYPE rsds_where.
Dynamische Feldselektion
MOVE 'QMFECAT_C' TO l_tab_fields-tablename.
READ TABLE select_fields WITH KEY l_tab_fields-tablename
                                INTO l_tab_fields.
IF sy-subrc <> c_rc00.
    CLEAR l_tab_fields.
ENDIF.
Dynamische Selektionskriterien
MOVE 'QMFECAT' TO l_ds_clauses-tablename.
READ TABLE dyn_sel-clauses WITH KEY l_ds_clauses-tablename
                             INTO l_ds_clauses.
DB-Zugriff
>>>>> SELECT (l_tab_fields-fields) FROM qmfe
INTO CORRESPONDING FIELDS OF TABLE qmfecat_tab
   WHERE qmnum = rqmqmel-qmnum
   AND kzloesch = space
   AND (l_ds_clauses-where_tab)
   ORDER BY PRIMARY KEY.
regard sinan
Edited by: eyup_sinan on Jan 6, 2012 3:21 PM
Edited by: eyup_sinan on Jan 6, 2012 3:30 PM

You seem to have made a copy of the standard program. You'll have to make sure that you are handling this field correctly in your code.
Rob

Field T_STCD1 does not exist in form this erroe msg coming in smartform

hi,
in my smartform, if i give one set of input like, 1st qtr of 2008, vendor and compcode, its displaying the value.
but if i give the input like 1st qtr of 2007, vendor and some other compcode its giving some error like
field T_STCD1 does not exist in form .
this error coming after printpreview and not displaying.
how can i debug it.
can any one help me...........plz
its very urgent.
thanks.

report zmm_vat_ex_cert message-id zz                        .
                         TABLE DECLARATION                           *
tables: bseg , tvko.
*Intenal Tables Declarations                                           *
types: begin of it_address_type .
        include structure zvat_vendor.
types :end of it_address_type.
types : begin of it_address_info_type.
        include structure zadrc_table.
types: end of it_address_info_type.
types : begin of it_desig_type.
        include structure zmm_vat_sign.
types: end of it_desig_type.
types: begin of it_bkpf_type,
      bukrs type bkpf-bukrs,
      belnr type bkpf-belnr,
      gjahr type bkpf-gjahr,
      blart type bkpf-blart,
      bldat type bkpf-bldat,
      xblnr type bkpf-xblnr,
      awkey type bkpf-awkey ,
      end of it_bkpf_type.
types : begin of it_bseg_type,
      bukrs like bseg-bukrs,
      belnr like bseg-belnr,
      gjahr like bseg-gjahr,
      bschl like bseg-bschl,
      mwskz like bseg-mwskz,
      shkzg like bseg-shkzg,
      wrbtr like bseg-wrbtr,
      sgtxt type bseg-sgtxt,
      end of it_bseg_type.
types: begin of it_rseg_type,
       ebeln like ekpo-ebeln,
       ebelp like ekpo-ebelp,
       bukrs like bkpf-bukrs,
       txz01 type ekpo-txz01,
       wrbtr type rseg-wrbtr,
       end of it_rseg_type.
data:begda type d, endda type d.
types: begin of it_item_type.
        include structure zitem_vat.
types:end of it_item_type.
data: it_rseg type table of it_rseg_type,
       wa_it_rseg like line of it_rseg.
data: gt_addr type table of it_address_type.
data gt_addr_info type table of it_address_info_type.
data gt_bkpf type table of it_bkpf_type.
data gt_bseg type table of it_bseg_type.
data:
      gt_tvko type standard table of tvko,
      gt_item type table of it_item_type,
      h_itab type table of it_bseg_type,
      it_desig type table of it_desig_type,
      temp_item type table of it_item_type .
data:wa_addr like line of gt_addr,
     wa_addr_info like line of gt_addr_info,
     wa_bkpf like line of gt_bkpf,
     wa_bseg like line of gt_bseg,
     wa_item like line of gt_item,
     wa_h_itab like line of h_itab,
     wa_it_desig like line of it_desig,
     wa_temp_item like line of temp_item,
    wa_tvko LIKE LINE OF gt_tvko.
     wa_tvko type tvko.
     Data Declaration                                                *
data: sumtotal type bseg-wrbtr, "rbkp-waers ,
      sl_no type zmm_vatex_sno-serial_no,
      fiscal_year type string,
      fm_name type rs38l_fnam ,
      w_q_flag(5),
      w_quarter type string ,
      close_date type sy-datum ,
      fiscal type sy-datum, fiscal_nxt type sy-datum,
      gv_belnr type bkpf-belnr,
      gv_gjahr type bkpf-gjahr.
data: ca_quarter type i.
data: l_adrnr type t001-adrnr.
data wa_vatex_sno type zmm_vatex_sno.
data: q(1).
data: stdtext(25).
S E L E C T I O N   S C R E E N                                     *
selection-screen begin of block b1 with frame title text-s01.
select-options: s_date for sy-datum obligatory no-extension.
parameters : vendor type lfa1-lifnr obligatory ,
             compcode type bkpf-bukrs obligatory.
select-options taxcode for bseg-mwskz obligatory default 'VI'.
selection-screen end of block b1.
at selection screen
at selection-screen on s_date.
if s_date-low0(4) <> s_date-high0(4).
    message e023 with text-e01.
endif.
*get calendar quarter using the month entered in From date.
*calculate the fiscal year and quarter
if s_date-low4(2) > '0' and s_date-low4(2) <= '3' .
    ca_quarter = 1.
    fiscal0(4) = s_date-high0(4) .
    fiscal_nxt0(4) = s_date-high0(4) - 1.
    concatenate fiscal_nxt2(2) '-' fiscal2(2) into fiscal_year .
    concatenate 'last quarter of year ' fiscal_nxt0(4) '-' fiscal0(4)
    into w_quarter separated by space .
    q = '4'.
elseif ( s_date-low4(2) > '3' and s_date-low4(2) <= '6' ).
    ca_quarter = 2.
    fiscal0(4) = s_date-high0(4) + 1.
    fiscal_nxt0(4) = s_date-high0(4).
    concatenate fiscal_nxt2(2) '-' fiscal2(2) into fiscal_year .
    concatenate '1st quarter of year ' fiscal_nxt0(4) '-' fiscal0(4)
     into w_quarter separated by space .
    q = '1'.
elseif ( s_date-low4(2) > '6' and s_date-low4(2) <= '9' ).
    ca_quarter = 3.
    fiscal0(4) = s_date-high0(4) + 1.
    fiscal_nxt0(4) = s_date-high0(4).
    concatenate fiscal_nxt2(2) '-' fiscal2(2) into fiscal_year .
    concatenate '2nd quarter of year ' fiscal_nxt0(4) '-' fiscal0(4) INTO
     w_quarter separated by space .
    q = '2'.
elseif ( s_date-low4(2) > '9' and s_date-low4(2) <= '12' ).
    ca_quarter = 4.
    w_quarter = '3rd quarter of year'.
    fiscal0(4) = s_date-high0(4) + 1.
    fiscal_nxt0(4) = s_date-high0(4).
    concatenate fiscal_nxt2(2) '-' fiscal2(2) into fiscal_year .
    concatenate '3rd quarter of year ' fiscal_nxt0(4) '-' fiscal0(4) INTO
     w_quarter separated by space .
    q = '3'.
endif.
*get first and last day of quarter by fetching calendar quarter and year in FM
call function 'HR_99S_GET_DATES_QUARTER'
    exporting
      im_quarter = ca_quarter
      im_year    = s_date-low+0(4)
    importing
      ex_begda   = begda
      ex_endda   = endda.
*validate the input dates is start and end of quarter
if s_date-low <> begda or s_date-high <> endda.
    message e023 with 'Enter quarter begin and end dates only'.
endif.
*get last day of next month. for close date
endda = endda + 1.
call function 'RP_LAST_DAY_OF_MONTHS'
    exporting
      day_in            = endda
    importing
      last_day_of_month = close_date
    exceptions
      day_in_no_date    = 1
      others            = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
     Start of Selection
start-of-selection.
*CNO is specific to a Quarter/ Company code/ Vendor.
unpack vendor to vendor.
clear:sl_no, wa_vatex_sno.
select single * from zmm_vatex_sno into wa_vatex_sno where from_date
eq s_date-low and to_date eq s_date-high and vendor eq vendor
    and compcode eq compcode.
if sy-subrc eq 0.
    sl_no = wa_vatex_sno-serial_no.
else.
    select max( serial_no ) from zmm_vatex_sno into wa_vatex_sno-serial_no WHERE
      from_date eq s_date-low and to_date eq s_date-high and compcode eQ compcode.
    if sy-subrc = 0.
      sl_no = wa_vatex_sno-serial_no + 1.
    else.
      sl_no = 1.
    endif.
    wa_vatex_sno-from_date = s_date-low.
    wa_vatex_sno-to_date = s_date-high.
    wa_vatex_sno-vendor = vendor.
    wa_vatex_sno-compcode = compcode.
    wa_vatex_sno-serial_no = sl_no.
    insert zmm_vatex_sno from wa_vatex_sno.
endif.
*data selection from bkpf by date,fiscal and compcode
refresh gt_bkpf.
select bukrs
        belnr
        gjahr
        blart
        bldat
        xblnr
        awkey
        into table gt_bkpf from bkpf
        where bukrs eq compcode and
        budat in s_date and gjahr eq fiscal+0(4).
check not gt_bkpf[] is initial.
refresh gt_bseg.
select bukrs
         belnr
         gjahr
         bschl
         mwskz
         shkzg
         wrbtr
         sgtxt from bseg into table gt_bseg
    for all entries in gt_bkpf where
          bukrs eq compcode and
          mwskz in taxcode and
          lifnr eq vendor and
         belnr = gt_bkpf-belnr and
     gjahr = gt_bkpf-gjahr and shkzg = 'H'.
selection without vendor   and posting key 40     *
refresh h_itab.
select bukrs
         belnr
         gjahr
         bschl
         mwskz
         shkzg
         wrbtr from bseg into table h_itab
         for all entries in gt_bseg
         where bukrs = gt_bseg-bukrs and
         belnr = gt_bseg-belnr and
         mwskz = gt_bseg-mwskz and
         gjahr = gt_bseg-gjahr and
         ( bschl = '40' or bschl = '21' ).
if sy-subrc = 0.
deduct the amount if posting key is 40 for PO based docs
    clear wa_h_itab.
    loop at h_itab into wa_h_itab where bschl = '40'.
      clear wa_bseg.
      read table gt_bseg into wa_bseg with key belnr = wa_h_itab-belnr.
      if sy-subrc = 0.
        read table gt_bkpf into wa_bkpf with key belnr = wa_h_itab-belnr.
        if wa_bkpf-blart <> 'KR'.
          wa_bseg-wrbtr = wa_bseg-wrbtr - wa_h_itab-wrbtr.
        endif.
        modify gt_bseg from wa_bseg
         transporting wrbtr where belnr = wa_bseg-belnr
         and bschl = wa_bseg-bschl .
      endif.
      clear wa_h_itab.
    endloop.
deduct the amount if posting key is 21 for non-PO based docs
    clear wa_h_itab.
    loop at h_itab into wa_h_itab where bschl = '21'.
      clear wa_bseg.
      read table gt_bseg into wa_bseg with key belnr = wa_h_itab-belnr.
      if sy-subrc = 0.
        read table gt_bkpf into wa_bkpf with key belnr = wa_h_itab-belnr.
        if wa_bkpf-blart = 'KR'.
          wa_bseg-wrbtr = wa_bseg-wrbtr - wa_h_itab-wrbtr.
        endif.
        modify gt_bseg from wa_bseg
         transporting wrbtr where belnr = wa_bseg-belnr.
      endif.
      clear wa_h_itab.
    endloop.
endif.
final internal table
clear wa_item. refresh gt_item. clear wa_bseg.
loop at gt_bseg into wa_bseg.
    read table gt_bkpf into wa_bkpf with key belnr = wa_bseg-belnr .
    if sy-subrc = 0.
      move :
       wa_bkpf-xblnr to wa_item-xblnr,
            wa_bkpf-belnr to wa_item-belnr,
            wa_bkpf-bldat to wa_item-bldat,
           wa_bseg-wrbtr to wa_item-wrbtr.
    endif.
*selections for item description
    refresh it_rseg.
    select ekpoebeln ekpoebelp ekpobukrs txz01 rsegwrbtr
      into table it_rseg
      from rseg join ekpo
      on rsegebeln = ekpoebeln
      and rsegebelp = ekpoebelp
      and rsegbukrs = ekpobukrs
        where rsegbelnr = wa_bkpf-awkey(10) and rseggjahr = wa_bkpf-gjahr AND
        ekpo~bukrs = wa_bkpf-bukrs.
    if sy-subrc = 0.
      loop at it_rseg into wa_it_rseg.
        wa_item-txz01 = wa_it_rseg-txz01 .
        if sy-tabix <> 1.
       wa_item-wrbtr = wa_it_rseg-wrbtr .
          wa_item-wrbtr = space .
        endif.
        append wa_item to gt_item.
      endloop.
    else.
      wa_item-txz01 = wa_bseg-sgtxt.
      append wa_item to gt_item.
    endif.
    clear: wa_bseg, wa_item.
endloop.
*if records not found give message.
if gt_item[] is initial.
    message e000(vz) with text-x01.
endif.
calculate the sumtotal
loop at gt_item into wa_item.
    sumtotal = sumtotal + wa_item-wrbtr .
endloop.
     Selecting supplier address                                     *
select single * from tvko into wa_tvko where vkorg = compcode.
append wa_tvko to gt_tvko.
if wa_tvko-vkorg = '2014'.
    stdtext = 'Z_2014_SOFTEX'.
elseif wa_tvko-vkorg = '2006'.
    stdtext = 'Z_2006_SOFTEX'.
else.
    stdtext = wa_tvko-txnam_adr.
endif.
select lifnr
         name1
         name2
         ort01
         ort02
         pfach
         stras
         regio from lfa1 into table gt_addr
         where lifnr eq vendor .
     Selecting sez address                                         *
SELECT SINGLE adrnr FROM t001 INTO l_adrnr WHERE bukrs EQ compcode.
SELECT name1
      name2
      city1
      city2
      post_code1
      post_code2
      street
      house_num1
      FROM adrc INTO TABLE gt_addr_info
      WHERE addrnumber = l_adrnr.
     Information for designation                                    *
select * from zmm_vat_sign into table it_desig where company = compcode
     Call Function module SSF_FUNCTION_MODULE_NAME                *
call function 'SSF_FUNCTION_MODULE_NAME'
    exporting
      formname                 = 'ZMM_VAT_EX_CERT'
VARIANT                  = ' '
DIRECT_CALL              = ' '
   importing
     fm_name                  = fm_name
EXCEPTIONS
NO_FORM                  = 1
NO_FUNCTION_MODULE       = 2
OTHERS                   = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
     Call Function module fm_name                                  *
call function fm_name
    exporting
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
      doc_num                    = sl_no
      quarter                    = w_quarter
      date                       = s_date-high
      sumtotal                   = sumtotal
      close_date                = close_date
      fiscal_year              = fiscal_year
      ca_quarter             = q
      text_name             = stdtext
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
    tables
      itab                       = gt_item
      it_address                 = gt_addr
      it_infoaddress              = gt_addr_info
      it_designation             = it_desig
      it_tvko                   = gt_tvko
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.

Field BSEG-SKFBT does not exist in the screen SAPMF05A 0302

Hi
while posting parked documents using FBV0 i am getting following error.
Field BSEG-SKFBT does not exist in the screen SAPMF05A 0302
What can be the solution to above error.
regards
Rajesh

To eliminate this problem please use transactions OB14, OB41 and set for posting key and G/L account
field status for field BSEG-SKFBT 'Optional entry':
transaction OB14 AND OB41 -> Select group 'Payment transactions' -> 'Payment terms' -> set 'Optional'.
I think the SAP note 1073234 could correct this issue.
Thanks,
Daniel

Field does not exist -- in STDOUT file

have written a simple query to error out based on a condition in the MAIN->PEOPLECODE section of app engine.
But i get an error in my report manager
Local number &count;
Local date &accdt;
SQLExec("SELECT ACCOUNTING_DT, COUNT(*) FROM PS_FZAM_VND_GL_STG WHERE GL_DISTRIB_STATUS = 'N' GROUP BY ACCOUNTING_DT ", &accdt, &count);
If &count < FZAM_VEND_REC.COUNTER Then
Error ("The value is less than the input value " | FZAM_VEND_REC.COUNTER | ".");
End-If;
Here FZAM_VEND_REC.COUNTER is a field in the page.
ERROR:
PSAESRV started service request at 10.58.22 2013-12-18
Field does not exist -- FZAM_VEND_REC.COUNTER. (180,104) FZAM_VENDOR.MAIN.GBL.default.1900-01-01.Step01.OnExecute PCPC:329 Statement:2
Process 30108041 ABENDED at Step FZAM_VENDOR.MAIN.Step01 (PeopleCode) -- RC = 8 (108,524)
Process %s ABENDED at Step %s.%s.%s (Action %s) -- RC = %s
PSAESRV completed service request at 10.58.22 2013-12-18

Hi Jim,
I changed my query like below , but still need your help.
Step01 -SQL
%Select(COUNTER1 , RUN_CNTL_ID)
SELECT A.COUNTER1
, A.RUN_CNTL_ID
FROM %Table(FZAM_VEND_RUN) A
WHERE A.OPRID = %OperatorId
AND A.RUN_CNTL_ID = %RunControl
Step02-SQ
%Select(ACCOUNTING_DT,COUNTER)
SELECT ACCOUNTING_DT
, COUNT(*)
FROM %Table(FZAM_VND_GL_STG)
WHERE GL_DISTRIB_STATUS = 'N'
GROUP BY ACCOUNTING_DT
Peoplecode
If FZAM_VEND_AET.COUNTER1 < FZAM_VEND_AET.COUNTER Then
Error ("The value is less than the input value " | FZAM_VEND_AET.COUNTER | ".");
End-If;
I Am getting SUCCESS MESSAGE IN OUTPUT
PSAESRV started service request at 14.26.31 2013-12-18 Application Engine program FZAM_VENDOR ended normally PSAESRV completed service request at 14.26.31 2013-12-18 .
But I want the above error message in my stdout file.

ALV Filter Selection w/ error "WBS element 0000000000000000 does not exist"

Hello,
In a few ALV reports, we have WBS Element column showed in ALV list and WBS Element defined as type BSEG-PROJK, which has conversion routine ABPSP.
When WBS Element is used for ALV list Filter, in Selection screen, error message "WBS element 0000000000000000 does not exist" is pop up as we hit Enter key or click on u201CSelection optionsu201D button with no value entered in Input fields.
We get same error even after we enter an existing WBS Element in Low selection input field and hit Enter key.
Itu2019s ok if we enter existing WBS Element value in both Low and High selection input fields.
We know we have workaround by entering both Low and High input field, and we can fix ALV reports by using character based WBS Element, such as PRPS-POSKI.
BUT, as users told me, they donu2019t have this problem before and it just happened. We checked the recent Transports and couldnu2019t see anything relevant.
Could any of you let me know if you have any clue or if thereu2019s any other way to fix it besides changing report by report.
Thank you.
SL

Hello,
In a few ALV reports, we have WBS Element column showed in ALV list and WBS Element defined as type BSEG-PROJK, which has conversion routine ABPSP.
When WBS Element is used for ALV list Filter, in Selection screen, error message "WBS element 0000000000000000 does not exist" is pop up as we hit Enter key or click on u201CSelection optionsu201D button with no value entered in Input fields.
We get same error even after we enter an existing WBS Element in Low selection input field and hit Enter key.
Itu2019s ok if we enter existing WBS Element value in both Low and High selection input fields.
We know we have workaround by entering both Low and High input field, and we can fix ALV reports by using character based WBS Element, such as PRPS-POSKI.
BUT, as users told me, they donu2019t have this problem before and it just happened. We checked the recent Transports and couldnu2019t see anything relevant.
Could any of you let me know if you have any clue or if thereu2019s any other way to fix it besides changing report by report.
Thank you.
SL

List does not exist . The page you selected contains a list that does not exists. It may have been deleted by another user

Hi everybody!
I have a sharepoint 2013 farm with 5 sever. I upgraded a site from sharepoint
2007 to sharepoint 2013. I had some problems to install and configure workflow manager and register it. but by now I found problems and I can create a workflow and run it successfully. My big problem is when I try to get a lookup field in my flow. the
flow suspended and I got the following error:
“List does not exist . The page you selected contains a list that does not exists. It may have been deleted by another user.”
Any solution???
Thanks in advance!

Hi,
Please make sure the source list of the lookup column and the list which consumes the content from the lookup column exists on the site collection.
In addition, to correct this problem the following steps should be applied:
Delete the affected Workflow association
Go to "Central Administration" - "Application Management"
Select the affected web application and choose "General Settings" - "Resource Throttling"
Increase the value configured as "List View Lookup Threshold"
Perform an iisreset to ensure that all in memory instances of the web application settings are gone
Add the Workflow association back to the list
More information is here:
http://social.technet.microsoft.com/Forums/en-US/3aeeba20-07dd-4e46-941b-a3db1bb3577e/sharepoint-2013-designer-workflow-the-page-you-selected-contains-a-list-that-does-not-exist?forum=sharepointcustomization
Best Regards
Dennis Guo
TechNet Community Support

Encountering error: "field does not exist, please re-enter" when setting up basic calculation

I created a form in InDesign with many form fields. I would like to be able to have specific form fields generate a sum total in another form field. In acrobat, when I select the form field I wish to have the calcualtion appear in, I select the fields I want to calculate and when I click OK, I am greeted with a pop-up error that the "... field does not exist, please re-enter". I can see that there is a field present when I select "Highlight Existing Fields", I can select it and even fill it in manually. What am I doing wrong?
I attempted to contact Adobe Help chat and they threw up their hands and directed me here. Does it have something to do with the naming convention? I am stumped but I really need to figure this out. Do I need specific script to drop into the field notation box?
Thanks,
In Over My Head

Thank you George.
Keeping the file names simple seems to be helping.
I am now encountering an issue where some field calculations (rouhgly 20 out of 58 different basic calculations) do not compute.They create no sum and remain "zero" despite being created the exact same way as all the other calculations that appear to be working flawlwessly.
I don't understand and it is giving me kittens.

Field VIQMSM-MATXT(14) does not exist in the screen SAPLIQS0 7204

Hi experts,
I have a BDC calls QM02 Tcode in a custom report as follow:
PERFORM bdc_dynpro      USING 'SAPLIQS0' '7204'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=REAK'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'VIQMEL-QMNUM'.
CLEAR txline.
CONCATENATE 'VIQMSM-MATXT(' lnindex ')' INTO txline.
" txline = VIQMSM-MATXT(0014)
CONCATENATE 'PO #: ' alv_qmel-ponum INTO matxt SEPARATED BY space.
PERFORM bdc_field       USING txline
                                  matxt.
PERFORM bdc_transaction USING 'QM02'.
When debugging I found that the input bdcdata table contains a field VIQMSM-MATXT(14) in screen SAPLIQS0 7204.
Number 14 is the number of task of the notification which was not marked as deleted.
This field caused the error: Field VIQMSM-MATXT(14) does not exist in the screen SAPLIQS0 7204 after that.
I would like to know what does VIQMSM-MATXT(14) mean? How BDC can transfer VIQMSM-MATXT(14) to QM02? And How does it work?
Thanks,
Khanh

Hi Kostek,
I did not have the solution for this exact problem because our FA canceled this bug.
Check your test case carefully whether the screen of the TCode called by BDC has that field OR NOT. If that screen does not have that field in your special case, just ignore it.
Regards,
Khanh

Error: Selected disk does not exist (21) Module-SRE-700

Already tried everything that the recovery cisco commands, anyone have idea how to solve the problem of the print shown in print?
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
ServicesEngine boot-loader> install_key waas-accelerator-4.4.5c.4-k9.bin
Keyfile Size 202814577 over limit 32768 will not burn into flash
ServicesEngine boot-loader> verify
Loading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
Unrecognized command
ServicesEngine boot-loader>
#service-module sm 1/0 session
Trying 172.20.245.1, 2067 ... Open
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Trying to reset Service Module SM1/0.
May 7 11:27:33.055: %SRE_SM-6-STATE_CHANGE: SM1/0 changing state from SERVICE_MODULE_STATE_ERRQ to SERVICE_MODULE_STATE_SHDN
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:29:03.331: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
þ
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:30:31.339: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
ú
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...

Hi,
Opened a tac and managed to get the resolution of the problem. For those with the same problem reported by me above just follow the procedure below:
1. uninstall existing SRE-V software
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1055364
2. run sm-hw-util to set sata mode to IDE
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438
3. configure a static, 32bit route to point the service module IP address to the SM slot/0 interface
ip route 255.255.255.255 SM slot/0
4. install WAAS:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/module/installation/guide/wssmcfg.html#wp47040
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438

"Selected disk does not exist" after install using Unetbootin

Hello, I downloaed core iso file and use unetbootin to created a bootable usb disk, then I booted from the usb disk, installed the system as usual, then I rebooted the machine, the grub menu is shown, but when I selected archlinux, it shows:
Booting 'Arch Linux'
root (hd1,0)
Error 21: Selected disk does not exist
Press any key to continue...
if I press any key, it goes to grub menu again.
I noticed that when I installed the system, the usb disk is /dev/sda1, the harddisk is /dev/sdb1, /dev/sdb2 ... (several partitions), so I guess there is a problem here, and when I reboot, harddisk becomes /dev/sda1 sda2... so the system cannot find /dev/sdb1 2...
I read a post about unetbootin, it did not mention anything about the problem, so I think there is no problem install using unetbootin...

Try to change (hd1,0) pour (hd0,0). GRUB considers the disk from where he was loaded as hd0.
If you want more infos check with http://sourceforge.net/projects/bootinfoscript/
and post it's output.

PROJ-ERDAT does not exist as selection field

Similar Messages

Maybe you are looking for