Project problem - HELP!

Hi everyone,
I am doing a wedding DVD for someone and got everything done. I've burned the project to DVD only to find out that it doesn't play in DVD players or doesn't play right.
When the disc was burned, it had this message: "Image incomplete" ,or something like that, after it spits out the disc. And the cancel button is active, but it takes forever to "clean up".
Anyone haave a solution to burn a DVD? iDVD 4 & 5 was so much easier.

How did you import the footage into iDVD 6? Did you edit in iMovie 6 first? Make a magic iDVD? One Step DVD?
That may hold the key to your problems. Here's a couple of things you can try:
First, instead of letting iDVD do the burning, just create a disk image of your DVD instead of clicking the burn button (File>Create Disc Image). Then you can use Disk Utility to burn the disc image to you DVD.
Personally, I've found that the most stable way to use iDVD is to import your footage into iMovie 6 first, even if you're not going to edit. Then, export the footage using the QuickTime full quality setting. This will create a "dv" file. Then just drag the dv file into your iDVD project. Then, I create a disk image of the project and test it using the computer's DVD player before I burn it.

Similar Messages

GUI Project problems, help please?

I am following my teachers instructions and I have followed the book. The code is straight out of the book. It compiles fine but then I go to run it and nothing happens, can someone tell me why? A program window opens and that is it, there is nothing inside of it.
Any and all help would be great! Thanks...
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class MemoSaver104 extends JFrame implements ActionListener
     public static final int WIDTH = 600;
     public static final int HEIGHT = 300;
     public static final int LINES = 10;
     public static final int CHAR_PER_LINE = 40;
     private JTextArea theText;
     private String memo1 = "No Memo 1.";
     private String memo2 = "No Memo 2.";
     public void MemoSaver()
          setSize(WIDTH, HEIGHT);
          addWindowListener(new WindowDestroyer104());
          setTitle("Memo Saver");
          Container contentPane = getContentPane();
          contentPane.setLayout(new BorderLayout());
          JPanel buttonPanel = new JPanel();
          buttonPanel.setBackground(Color.WHITE);
          buttonPanel.setLayout(new FlowLayout());
          JButton memo1Button = new JButton("Save Memo 1");
          memo1Button.addActionListener(this);
          buttonPanel.add(memo1Button);
          JButton memo2Button = new JButton("Save Memo 2");
          memo2Button.addActionListener(this);
          buttonPanel.add(memo2Button);
          JButton clearButton = new JButton("Clear");
          clearButton.addActionListener(this);
          buttonPanel.add(clearButton);
          JButton get1Button = new JButton("Get Memo 1");
          get1Button.addActionListener(this);
          buttonPanel.add(get1Button);
          JButton get2Button = new JButton("Get Memo 2");
          get2Button.addActionListener(this);
          buttonPanel.add(get2Button);
          contentPane.add(buttonPanel, BorderLayout.SOUTH);
          JPanel textPanel = new JPanel();
          textPanel.setBackground(Color.BLUE);
          theText = new JTextArea(LINES, CHAR_PER_LINE);
          theText.setBackground(Color.WHITE);
          textPanel.add(theText);
          contentPane.add(textPanel, BorderLayout.CENTER);
     public void actionPerformed(ActionEvent e)
          String actionCommand = e.getActionCommand();
          if (actionCommand.equals("Save Memo 1"))
          memo1 = theText.getText();
          else if (actionCommand.equals("Save Memo 2"))
          memo2 = theText.getText();
          else if (actionCommand.equals("Clear"))
          theText.setText("");
          else if (actionCommand.equals("Get Memo 1"))
          theText.setText(memo1);
          else if (actionCommand.equals("Get Memo 2"))
          theText.setText(memo2);
          else
          theText.setText("Error in memo interface");
     public static void main(String[] args)
          MemoSaver104 guiMemo = new MemoSaver104();
          guiMemo.setVisible(true);
}Here is the code for the WindowDestroyer104, if needed...
import java.awt.*;
import java.awt.event.*;
public class WindowDestroyer104 extends WindowAdapter
     public void windowClosing(WindowEvent e)
          System.exit(0);
}

You never call your public void MemoSaver() method which is supposed to do all the work.That's probably supposed to be the constructor, in which case it should be:
public MemoSaver104() { ... }

I have lost an fcpx project. when i search it, i'm directed to a backup file, but it's just (gibberish/code) text. how can i retrieve/restore my project? HELP!!!???

i have lost an fcpx project. when i search it, i'm directed to a backup file, but it's just (gibberish/code) text.
i think i was asked to install an update (something to do with libraries?) before i started working, but i didn't do the update.
don't know if this has anything to do with problem.
how can i retrieve/restore my project? HELP!!!???

juddfromsherman oaks wrote:
i have lost an fcpx project. when i search it, i'm directed to a backup file, but it's just (gibberish/code) text.
The backups for your version are date-time stamped as the name and with an extension of .fcpproject. They look like this.
The original project is named CurrentVersion.fcpproject.
You need to replace the CurrentVersion with the backup file and rename it to be CurrentVersion.fcpproject.
With FCPX closed, I suggest you move the original to the Trash, but not empty it. Then promote your backup one level higher in the project folder hierarchy (to be at the same level that the original previously occupied. Then rename the backup.
Open up FCPX, which should now recognize your project.
Russ

My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

Thank you both for your responses but my daughter was reassured by the salesman in the iStyle store (official Apple store in the UAE) that iMessages would work but conceded that FaceTime wouldn't. My iTunes account is registered in the uk and my daughter's iPhone has iMessages even though she bought it (and uses it) in Dubai. Can anyone else throw any light on this?

I couldn't log into my apple account on my iPad, then i couldn't unlock it resulting in it being disabled, however it's the same as my iPhones password, I then called apple, i was hung up on twice and they said it will cost £70 to fix THEIR problem, help?

I couldn't log into my apple account on my iPad, then i couldn't unlock it resulting in it being disabled, however it's the same as my iPhones password, I then called apple, i was hung up on twice and they said it will cost £70 to fix THEIR problem, help?

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
http://support.apple.com/kb/ht4097

IPad syncing problem - HELP!

iPad sync problem - HELP! I keep getting this message "...cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional ...space needed)" and yet I seem to have plenty of space on the iPad. This just started today. I even tried deleting some things to make even more room, but it didn't help. Any ideas???
I was thinking of restoring, but I've never done it... should I?
thank you!

Hello florafromnv,
Welcome to Apple Support Communities.
The following article addresses how to resolve the issues related to this message:
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/TS1503
Regards,
Jeff D.

MOVED: KT333 Ultra; fuzzy logic, 1.6xp overclocking problem help !!!!!

This topic has been moved to Overclockers & Modding Corner.
KT333 Ultra; fuzzy logic, 1.6xp overclocking problem help !!!!!

Not that I am an expert o/c but here are some thoughts on the matter.
My comments are based on my experiences of the KT3 Ultra2 which is basically the same as the Ultra version.
This mobo does not have the ability to lock the PCI/AGP bus freely from the FSB. However, it does have dividers. At 133 a 1/4 divider kicks in. Above 152FSB the 1/5 divider works, so that at 166 the PCI & AGP buses will be back in sync. If you are o/c your cpu, don't go from 133 to 145, etc since you will be running the PCI/AGP buses further out of whack. Just go to either the mid 150's or to 166 in one jump. The other problem / issue relates to your cpu. From what you say you have one of the old Palominos which are not great o/c's. I would personally o/c your cpu from the BIOS rather than 'Fluffy Logic' which I would tend to stay away from.
With a 166FSB cpu a very stable o/c would be 175-177 beyond 180 gets decidedly tricky.
Hope this helps

Itunes keeps closing as soon as i open it and states 'windows has detected a problem' HELP!!!!

Help!! Itunes keeps closing straight away and message states 'windows has detected a problem' HELP ASAP PLEASE!!!!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

I have installed photoshop elements 12. when I try use the editing features it said that i must login to Adobe to register the product. but each time i try to it said there is a problem. help the problem stated that the internet is not connected, but that

i have installed photoshop elements 12.
when I try use the editing features it said that i must login to Adobe to register the product.
but each time i try to it said there is a problem.
help
the problem stated that the internet is not connected, but that is not the case.

I had the same issue and I'm running Windows 7. Tried working with technical support for several hours but they were no help. They just had me doing the same things over and over, offering no real answers. I finally got fed up and have decided to return my product for a full refund.

I can't install the itunes to my windows 7 X86 APPCRASH problem, help me guys

i can't install the itunes to my windows 7 X86 APPCRASH problem, help me guys?? i don't know what to do..

Why are you unable to install the iPod Updater? Are you getting an error message? Please be specific.
Cheers!
-Bryan

Camera (focus) problem - help?

Duplicate post, please see: Camera (focus) problem - help?
Message was edited by: Admin Moderator

Warranty is valid only in country of original purchase. You have to return
the iPhone to the US for evaluation. Either you return it personally or send
it to a friend/relative/co-worker in the US to take into Apple. Apple will not
accept international shipments for evaluation nor will Apple ship out of the
country after repair/replacement.
Have you tried the standard trouble shooting steps: restart, restore, restore
as new iPhone?

After update iPhone4 to iOS6, its stuck, showing only USB to iTunes on the screen. What to do, how to solve problem, help

after update iPhone4 to iOS6, its stuck, showing only USB to iTunes on the screen. What to do, how to solve problem, help

Connect your phone to iTunes on your computer like the diagram has indicated and restore the phone

I just tried to open my last Soundtrack Pro Projet and I got this message : "NS InternallnconsistenceException Invalid parameter not satisfying:m_splitViewer". Curiously, I can't open any other project. Help! Please!

I just tried to open my last Soundtrack Pro Projet and I got this message : "NS InternallnconsistenceException Invalid parameter not satisfying:m_splitViewer". Curiously, I can't open any other project. Help! Please!

Did this just happen after upgrading to 10.9?
Try using Preference Manager by Digital Rebellion (it's free) to delete your preference files for Soundtrack.
x

What is the use of Database View, maintenace , projection and Help view

hello friends,
I created tables..and set check table relation.
how to create Database View, maintenace , projection and Help view
phani

Hi,
have a look at this.
4 type of views
database
maintainance
help
projection view
check this link as well
(https://forums.sdn.sap.com/click.jspa?searchID=9904886&messageID=4885135)
Database views are implemented with an equivalent view on the database.
Projection views are used to hide fields of a table (only projection).
Database views should be created if want to select logically connected data from different tables simultaneously.
Database views implement an inner join.
Application programs can access the data of a database view using the database interface. (Just as we write select queries on database tables, we can write them for views as well.)
Includes in Database Views
An entire table can be included in a database view. In this case all the fields of the included table will become fields of the view (whereby you can explicitly exclude certain fields).
To include one of the tables in the view, enter character * in field View field, the name of the table to be included in field Table and character * again in field Field name on the View fields tab page of the maintenance screen of the view.
You can also exclude individual fields of an included table. If you do not want to include a field of the included table in the view, enter - in field View field, the name of the included table in field Table and the name of the field to be excluded in field Field name.
Inserts with Database Views
If a database view contains only one single table, data can be inserted in this table with the view .
You have the following options for the contents of the table fields not contained in the view:
If the field is defined on the database with NOT NULL as initial value, the field is filled with the corresponding initial value.
If the field is defined on the database as NOT NULL without initial value, an insert is not possible. This results in a database error.
If the field is not defined on the database as NOT NULL, there will be a NULL value in this field.
A maintenance view permits you to maintain the data of an application object together.
The maintenance status determines which accesses to the data of the underlying tables are possible with the maintenance view.
Read only: Data can only be read through the view.
Read, change, delete, insert: Data of the tables contained in the view can be
changed, deleted, and inserted through the view.
Read and change: Existing view entries can be changed. However, records
cannot be deleted or inserted.
Read and change (time-dependent views): Only entries whose non-time
dependent part of the key is the same as that of existing entries may be
inserted.
Maintenance View ( SE54 )
You can use a maintenance view to maintain data, which is distributed over several tables, at the same time.
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Creating maintenance View:
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecdf446011d189700000e8322d00/frameset.htm
regards,
vipul

Project problem - HELP!

Similar Messages

Maybe you are looking for