RH7: Project Manager Tab keeps refreshing continuously

I have upgraded my project from RH5 to RH7. There were in all 65 projects (.xpj) files that I upgraded. However, i have this issue with some of the files. When I open the xpj file, the Project Manager tab keeps refreshing. I cant scroll and select the files that are towards the end because the moment I click the scroll bar, the the tab refreshes and I cant click on the file.
Most of the files that I upgraded work fine.
Please suggest a solution. Thanks.

Have you tried renaming the CPD and reopening RH to make it create a new one?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

CC2014 Project Manager not keeping speed changes

trying to use project manager to consolidate a 40 minute sequence, everything looks good along the way, but any speed changes in the sequence are not keep in the new project....anyone else experience this? and is there a workaround?

Is this specific to this project (or specific settings) or are you seeing this in general? e.g.: if you create a new Project, apply Speed/Duration to a single clip in a Sequence (e.g.: 200%), then Consolidate and Transcode, does the Transcoded Project still have the Speed/Duration value applied to the clip in the Sequence?
I have not seen any reports on Speed/Duration missing and also ran a few sanity checks with Speed/Duration and Time Remapping in CC2014 (8.2), which all continued to have Speed values applied in the Transcoded Project Sequence. I also tried Collect Files and Copy to New Location, which also retained Speed values.

Safari 5.1.6 tabs keep refreshing, any help?

I have read a few hints about issues with an older Safari, but I am having trouble with 5.1.6.
I will browse the internet, click back on a tab, and the site will refresh. Highly annoying for when you are streaming radio, music etc.
If I am downloading, when the page refreshes, the download stops, so I have to start again.
Does anybody have a solution?
Cheers.

Hi...
but I am having trouble with 5.1.6
Try updating Safari to 5.1.7. Click your Apple menu icon top left corner of your screen. From the drop down menu click Software Update...
Restart your Mac after the updates are installed, try Safari.

How to stop an "Add-ons Manager" tab that keeps appearing every time I open a new web page ?

Does anyone know how to stop a Firefox "Add-ons Manager" tab that keeps appearing every time I open a new web page ?
Thanks....

''arcadiune [[#question-1052917|said]]''
<blockquote>
Does anyone know how to stop a Firefox "Add-ons Manager" tab that keeps appearing every time I open a new web page ?
Thanks....
</blockquote>
Solved it shortly afterwards thanks as I realised it must have happened when I refreshed Firefox, so went through the process again and found the boxes for tabs already pre-ticked so cancelled them. Would have been a lot easier though had it been left as an option to tick as I assumed it was another safeguard leaving me with no idea what had happened....
Anyway thanks :-)

P3 Project Manager Crashing with EBDClient error, when refreshing (F5)

My company has 3 sql databases for Prima on a server; 2 are approximately 1.5GB, and the third is just over 2GB
We have 5 client machines (xp sp3 32bit), that use the following setup:
P3 Project Manager version 5 (no service packs installed, but have tried sp1-3 on my machine with the same error)
oracle client 9.2 with tnsnames pointing to the sql server with the prima databases
each machine has 2GB memory with a 3-4GB pagefile
I do not have issues refreshing the other smaller databases.
both the client and server do not take a significant hit on resources while refreshing.
both the server and client are not reporting any errors under event viewer.
they all receive the following error when refreshing (F5) while logged in the third and largest database:
Message (Tab)
Application exception
type: EDBClient
Event code: IMFTO-3501-8
Description: Insufficient memory for this operation
Context (tab)
app title: primavera project management
exe: pm.exe
object: tmainmenu
context:
     1. tfrmmain.refreshVDBengine
     2. tfrmmain.actrefreshExecute
     3. tfrmmain.actProjectActivitiesExecute
     4. tfrmmain.actProjectsExecute
     5. tfrmmain.actProjectsActivitiesExecute
     6. tfrmmain.actProjectWBSExecute
     7. tfrmmain.actProjectActivitiesExecute
Evironment (tab)
Components
=============
ORI: ORI Win32 #
ORI/DB: PMDB,0500.0024.0001.0002
IMG: IMG win32 #1000
SYS INFO
=============
username: "user's name" Hostname: "their computer name"
OS version:     winNT 5.1, build 2600, SP3

...\OracleBI\web\catalogmanager\catalogmanager.ini
-vmargs
-Xmx1024M
-Djava.library.path=E:\OracleBI\web\bin
-Declipse.noRegistryCache=true
amend---------------------------------------------------------
-vmargs
-Xmx512M
-Djava.library.path=E:\OracleBI\web\bin
-Declipse.noRegistryCache=true

DMS Tab it's not visible in Project Management (PPM 5.0)

Hello Gurus;
I have been active the SAP DMS option in:
SPRO --> SAP Portfolio and Project Management --> Project Management --> Structure --> Define Project Types
And configured the document settings:
SPRO --> SAP Portfolio and Project Management --> Project Management --> Documents -->
Create Status Profile for Documents
Define Object Links for Documents in DMS
Define Object Links for Project Status Reports in DMS
But it isn't visible the DMS tab.
Has anyone fixed this issue?
Best regards,
Mariano

Hi Mariano,
DMS Status Reports tab appears at the level of Structure tab. And SAP DMS is at the level of Basic Data under Structure tab.
Check the application configuration CPROJECTS_FPM under the package DEVELOPMENT_PROJECTS_UI_WD in SE80.
After launching the configurator, check if all the tabs are there for the CPROJECTS_FPM.
Regards
Amit

Portfolio Tab under project management is Blank

Hello,
We are implementing SAP PPM 5.0 for our client. I am facing issue in Portfolio and Project Management Linking.
I am following steps mentioned below.
1. Create Portfolio Item
2. Fill the required details
3. Select "Create Project on Saving" option
4. Select template from the drop down
5. Save and close the Item
6. Revisit the Item
7. Project is created and the is appearing relationship tab -- Related Objects
As the Item is saved and the Project is created. I go to Project Management and open the project. Here I am not able to see any Portfolio details.
Configurations/Master data
I have done following back end activities
1. Project Template Created
2. Template released
3. Mapping of Template with Project Item Type
Am I missing any configuration? How can I see the portfolio details in project management?
Please help.
Regards
GYB

Thanks Lashan
With implementation of this note I could resolve this issue.

Project - Change Management Tab missing

Hi Guys
After renaming a test Solution Manager, which is a copy from an existing System, Change Management Tab is not visible in the a Project Attributes.
Before the SID renaming, the tab was visible, but after chaning the name to SMT, it no longer appear.
When accessing SOLAR_PROJECT_ADMIN transaction, under System Landscape, there are only three tabs instead of four
Some logical relation is missing? Any idea where can I verify why?
Thanks!
Copied and Renamed system (SMT) with SOLMAN_ADMIN, client 200
Original System (SSM), user SOLMAN_ADMIN on Client 200

Hi,
as you copied the system, probably there is a missing entry which defines the client in which ChaRM will be active. Check in SPRO below "Change Management->Basic Configuration" the IMG activity "Activate Integration with Change Request Management->Activate Change Request Management and Set-up client". It must have your client 200 specified.
Regards,
Raquel

Hiding/Disabling the resources tab under project management.

Hi,
We need to hide/disable the resources tab in project management screen. We are not using project resource management module and also the Profile Option "PA: Licensed to use Project Resource Management" has been set to "No".
Can someone suggest a solution for the same.
Regards,
Rakesh Menon

I already got an response to the issue from Julia through Oracle Community...
Below is the solution -
For the Project Management Responsibility where you want your Resource Tab to be disabled:
Go to a System Administrator responsibility - Security - Responsibility-Define.
Look for your resposibility of Project Management.
Under Menu Exclusion Tab add a line with Type Menu and name "Project Resource Sub Tab".
Click Save button and then go to check in your responsibility if the Resources Tab is disabled. (it should be).

My browser keeps refreshing, no matter what page i'm on, or how many tabs I have open.

It happens every time I open Firefox. It doesn't matter what site it is, or how many tabs are open. He keeps refreshing all of them.

A few problems could cause this. Try Firefox in safemode, also review what is set as your homepages.
*[[Troubleshoot Firefox issues using Safe Mode]]
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
*[[Startup, home page and download settings]]
*[[How to set the home page]]
Can you give a bit more detail of what happens and
* whether this is just on initial startup ?
* what happens if you close all but one tab ? <br />what happens then ?
* can you describe what you mean by keeps on refreshing

After updating to latest firefox computer on internet running slower,taking longer to go to links and sites.also if i click on an email link the link keeps refreshing as mailto and wont stop opening new tabs very quickly,have to shut down to stop it.

since installing latest update,when using internet,email everything has slowed down and is taking long to go to websites to upload pictures to emails.
also when i click on an email link to send email the tab bar keeps refreshing and opening a new tab very quickly all i can read cos its going so fast is mailto this has happened several times on various websites,i clicked on a email us link on grangerhertzog.com yesterday and it did it.

You get that problem if you select the Firefox program to handle a file if you get an "open with" dialog.
*https://support.mozilla.org/kb/Firefox+keeps+opening+many+tabs+or+windows

Images are missing in Project Manager

I’m replacing old images with new ones in RoboHelp HTML 10.
I’ve deleted the old pictures in Design view and pasted the new pictures in. (I know this is not the recommended way but with lake of time I found it to be the fastest way and we don’t feel the need to give the files described names at the moment.)
It has worked fine until now when I noticed that some images are not showing in Project Manager. I see the “folder” Images and I see a lot off images there but some are missing. The “missing” images are shown in Design view and in the browser after publishing. But in the report Unused files the “missing” images are listed as unused.
I have tried to
close and reopen the project,
generate and publish the project,
delete an “missing” image from Design view and insert it by using Insert / Image. After saving this image, and some other “missing” images, are shown in Project Manager. But not all “missing” images.
Does anyone know why this is, or more important how to get Project Manager to show all images that are used in the project (without having to go through all 154 images trying to figure out which are used but “missing”)?
Some more facts:
They are all gif-images.
They are all stored at the top-level in the project folder. (Are there a limit how many images there can be in the top-level folder? Should I create a separate folder and move the pictures there?)
HTML-code for one “missing” image:
<img src="image7.gif" alt="" style="border: none;"
border="0" />
Grateful for any input!

I would have said "Try renaming the folder containing the images in Rh's Project Manager. That sometimes fixes the problem. You can revert to the old name afterwards."
Keeping all the images, and / or topics, in the root is never a good idea. It can slow things down and it's messy.
You can move the images you can see but obviously you cannot move the others. Try moving a topic that has one of the images to a different folder and see if that refreshes. Also try deleting the CPD file and reopening Rh.
Backup first.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

"Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." Trying to format my iomega external HD for use with Mac

Hi. Trying to connect iomega ext. HD. i have to reformat for Mac. When i plug in & go to Disk Utility,the external shows up and i'm supposed to click "partition". When i do, a box comes up saying ""Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." I quit and relaunched, same results. After googling my question, i came up with this:
"Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility."
(Quitting and reopening Disk Utility does not help.)
The following also appears in Console log:
*** malloc[419]: Deallocation of a pointer not malloced: 0x290a410; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug : for architecture i386 object: ./Applications/iTunes.app/Contents/MacOS/iTunes malformed object (unknown flavor for flavor number 0 in LC_UNIXTHREAD command 27 can't byte swap it)
Workaround
Quit Disk Utility.
From the Finder's Go menu, choose Go to Folder....
Type the following, then click OK: /Library/Receipts
Temporarily remove these iTunes receipts from /Library/Receipts (sort the folder alphabetically as a list):
iTunes.pkg
iTunes4.pkg
You can put them on the desktop, for example. Do not remove iTunesX.pkg or iTunes Phone Driver.pkg.
Open Disk Utility and repair disk permissions again.
Quit Disk Utility.
Put the removed iTunes receipts back in /Library/Receipts.
Note: This issue does not affect Disk Utility's verify or repair disk features.
All seemed good, for a moment, until, upon going back to Disk Utility after removing itunes4.pkg and putting on desktop (i did not have itunes.pkg to remove) the same thing was happening. When i highlite my iomega ext. on left of page, disk perrmissions is grayed and does not allow me to click on it. Same problem from the start. Can somebody please help me out here? That would soooo awesome. Thanx!

i'm just scared i will do something wrong on my own and lose my data.
You shouldn't be scared of that, because you should already have backups. If you don't have backups, then backing up is the first priority.
Insert the Snow Leopard DVD and restart. When you hear the chime, hold down the C key and keep holding it until the Apple logo appears on the display. You should now see the language selection screen. Select your language, then choose Utilities > Disk Utility from the menu bar. In the Disk Utility window, select the external drive (not the internal). The drive may already have a data partition, in which case there will be another icon below the drive icon. Choose the drive icon, then select the Partition tab. Create a single partition with the default options (GUID partition table, Mac OS X Extended Journaled).
When the partitioning is done, select the startup volume on your internal drive in the DU window. Select the Restore tab. Drag the icon of the startup volume to the "Source" field. Then drag the icon of the newly-created volume on the external drive to the "Destination" field. Make sure you have this right. Then click the Restore button, and the data on your startup volume will be copied to the external drive.

Project Management using Solution Manager

Hi,
We are trying to use solution Manager for managing our IT projects - specifically for SAP projects.
We browsed through the existing functionalities that are available and are not able to get info on the following:
___Project Admin tab for Roadmaps :_ __ In the transaction RMMAIN, we are able to define the scope of the activities at each phase and assign team members and track the status of the activity / task.
However we do not have the tab for tracking the planned start date / end date and the actual start / end dates. Similar is the case for efforts.
So not sure how to track these?
Integration of Roadmaps and Blueprints : Once we have defined the project and assigned the Roadmap, we have all the activities that need to be tracked. In addition in transaction SOLAR01 / SOLAR02, we can define the scope and configurations which in itself are a kind of sub projects to be embedded withing the Blueprint and realization phases respectively of the main Projetc Plan.
How to link these Blueprint specific plan and the realization related plan to the main project plan created out of the Roadmap chosen and to track them as one single project?
Synchronization wih ms project : I see only the option to download the plan as an mpp file. But is there any option to upload mpp as well so that the project can be tracked using mpp and synchronized with Solution manager at frequent intervals?
Your answers would definitely be helping us a lot and would be greatly appreciated.
thanks in advance.
regards,
suresh velan

Hi Suresh,
Solution Manager is a Project Management tool. But it is not for Project Planning. If you want to do Project Planning also from the SolMan system, then you have to enable cProjects component of SolMan.
Synchronization between your MS Project and cProjects is possible. But synchronization between SolMan's RoadMap/Blueprint and MS Project is not possible.
In RoadMap, you can capture and track the status of all phase-wise activities as to what is their status. Here capturing date details is not possible.
In Blueprint/Configuration you can capture and keep track of the individual object's blueprinting and configuration activities. Here you can capture the planned/actual start/end dates for each object.
As I said earlier, Solution Manager provides lot of Project Management features, but Project Planning is not possible. For that we have to start using cProjects component in SolMan.
Hope it helps.
best regds,
Alagammai.

Project Manager? How do you all use it?

Hi. Im new to the project manager. It seems as if it could be of benefit to me using it to organise my sessions. What is it for and how do you use it. I have read the manual but want some personal feedback. Thanks, Ben

in theory, the PM keeps tabs on all the files used/made in your sessions.
sorta like a dedicated version of spotlight.
the initial scan takes a while, but then all your audio, midi and patches are in one place after that.
i do a PM scan before and after each important session.
PM can miss stuff, so if you've just added a new sample lib, or tracked some vox for eg., it's a good idea to scan just the audio file section of the tree on the left.
similar with new esx instruments, songs, etc.
the find function allows you to see all clips that meet with the critera set and i use that to check for copies, duplicates, redundant files, etc.
you can also edit any files PM finds. in this way, it's like a bigger, better version of the audio window.
it's too bigger subject to go into too much more detail here, but sufficed to say, i have a lot less trouble with logic finding things if PM is kept up to date.

RH7: Project Manager Tab keeps refreshing continuously

Similar Messages

Maybe you are looking for