Project Surplus / Project left-out Materials In SAP

Dear SAP Guru,
Kindly advice, How to handle the Project Surplus / Project left-out material in SAP for O&M. We have to take the material in stock & same way it should not affect our inventory (because this material was with out PO)
If we tale the Material in stock with 501 / 511 Movement it affect the Moving average price.

this thread may shed light:
http://discussions.apple.com/thread.jspa?messageID=8894209&#8894209

Similar Messages

Upon entering a LV project file into VSS, all files in the project are left out. Only the project shell and settings enter VSS. Any idea why?

Upon entering a LV project file into VSS, all files in the project are left out. Only the project shell and settings enter VSS. Any idea why?
Solved!
Go to Solution.

Chuck72352,
Hello! It is my understanding that you need to add the individual files to the Source Code Control along with the .lvproj file.
Here is a great deal of information on Source Code Control Practices in LabVIEW.
Ben Sisney
FlexRIO V&V Engineer
National Instruments

Project Management Add-on for SAP Business One.

Dear All,
I am looking for a project management add-on for SAP Business One that can be used by any company in services sector or an NGO to manage their projects.
Thanks

Hi,
We have a addon for Project Management in phase of certification for SAP Store.
For further informations please send e-mail [email protected]
Regards,

Running "Build 'em All" example Xcode project wiped out MediaCore folder

I'm having a hard time setting up Xcode to properly compile the example code into a debug product build that eventually ends up in the MediaCore folder.
I initially got it to work simply by clicking the 'Run' button on the 'Skeleton' and 'Checkout' projects.
Then I decided to just build them all, and pressed 'Run' while I had the 'Buildall' selected. Seemed like everything ran okay, but then AE was starting to act buggy. Told me Quicktime wasn't installed, etc. I noticed that all my plugins were missing, and sure enough the entire MediaCore folder seemed to be overwritten. Do I have to re-install AE and all my plugins to get those back?
Most importantly, though, is why did running the 'Buildall' project wipe out the folder of everything?
I read this in the SDK guide:
We’ve combined the sample projects into a single master project, stored in the Examples folder of the SDK. For Mac OS, it is Buildall.xcodeproj; for Windows, it is BuildAll.sln.
In your IDE, you’ll need to change the output folder of your project to build into After Effects’ plug-in folder. For development, we recommend using the following path for Mac
OS: /Library/Application Support/Adobe/Common/Plug-ins/[CS version]/MediaCore/
for example: /Library/Application Support/Adobe/Common/Plug-ins/CS6/MediaCore/
So, I set absolute paths for the build location in my project settings dialog, in the locations tab. I placed 'intermiediates' in a different folder from 'products'.
I just need to know they best way to configure Xcode 4.5 to output the example projects in the correct manner. I'm afraid I'm going to have to reinstall the plugins.
Thanks!
Removed incorrect image.

hi Lazlo Hollyfeld! welcome to the dark side... :-)
set to build directory to any folder you like (i created a nice folder called "build64"),
then just put a shortcut from AE's "blug-ins" folder to you build folder.
yes, AE does shortcuts.
leave media core alone...

Will project archive out of elements 13 work in premiere pro cc or should I output to file? Thanks

Will project archive out of elements 13 work in premiere pro cc or should I output to file? Thanks

Hi Phillip,
You should be able to open a Premiere Elements Project in Premiere Pro CC (Windows only), however, I tried it and found the results were not very acceptable for use as a backup. Can you try it first?
Thanks,
Kevin

Left Outer Join with more than two tables in both CR 8.5 and XIR2

I am trying to create a report and I have tried two versions of Crystal but I ultimately need the report in CR8.5 for compatibility with the client's system. I think I am starting to figure out what might be wrong and it might be my understanding of SQL, but I can't see why someone hasn't needed this in the past. Ultimately I want to see all projects and any journal entry that might be posted for that project.
Database is MySQL 5.0.38 and using MySQL ODBC driver 3.51.19.
Project header table information will be populated. Each line item on a journal entry can be tagged with the project ID. But for me to pull the journal entry date I need also to link to a third table for the journal entry header info.
I want to see all projects, whether a journal entry has been posted or not.
So the links are like this
ProjectHeader --->Left Outer Join ---> JELines ---> Inner Join ---> JEHeader
I think in this scenerio Crystal is treating the LOJ as an IJ.
I created two brand new reports today, one in CR8.5 and one in CR XIR2. Once I edited the automatic CR8.5 SQL statement (which I have been doing for years, usually without problem), they both ran properly. I linked customers to their invoices. Customers without invoices showed properly. But then I linked the invoices to the payments of the invoices and immediately lost customers without orders in both reports.
So apparently only two tables are allowed in Outer Joins. Does this make sense? I checked out the w3schools tutorial on SQL and it doesn't mention this limitation and I can't find anywhere else that it specifically indicates this but all samples of code I have seen only show two tables. I just thought for presentation as a sample that was easiest to understand and we could expand as necessary.
If this is correct, how does one go about accounting for this kind of thing? One solution that goes through my mind is creating a view at the database level for the link between journal entry lines and journal entry headers. Would this be a good solution under normal circumstances?
A second option that I had to implement because of timelines, is to use a subreport linked to the main report through the project ID to pull the information for the journal entries and just pass the totals I need to the main report through a shared variable.
These aren't normal circumstances because I don't have access to the database so I can't create the view. I have come across this concept several times and I have been able to use subreports to solve it but I am trying to find a better solution for the future as sometimes subreports can be slow. So are there any alternatives I have not considered here?
TIA rasinc

So after some more work and another post. I was able to get this to work.
Items disappear when linking to another table
My issues were two fold. I was selecting on the tables on the right-side of the original Inner Join. However, I was checking for Nulls. This apparently is correct but you must check for the Nulls first eg. (IsNull (JEHeader.Field1) OR JEHeader.Field1 <= 100). I had my original statement reversed checking for <= 100 before checking for Nulls.
I also did not set all links to be Left Outer Join. I had the Inner Join. I actually have about 6 tables in this report so all the links need to be set Outer Join. So this now seems to be corrected.
Thanks

How to use left outer join on more than one table (source)

Hi all,
In our project we are converting the Unix shell & SQL scripts into OWB mappings. We are facing problem converting left outer join in OWB. here is one of the example. i have just pasted the FROM and where condition.
FROM ym_scr t1, branch_finmonth t3
LEFT OUTER JOIN item_image t2
ON (t1.branch_no = t2.branch_no
AND t1.item_no = t2.item_no
AND t3.to_date between t2.tran_dt and t2.to_dt
AND t2.to_dt >= '$start_images' ) <<<========= '$start_images' THIS COMES FROM THE UNIX VARAIBLE ,
We converts the same when we are putting it in OWB join Operator
INGRP1.branch_no = INGRP2.branch_no(+)
AND INGRP1.item_no = INGRP2.item_no(+)
AND INGRP3.to_date between t2.tran_dt and t2.to_dt
AND INGRP2.to_dt >= INGRP2.start_images
But as you see in the OWB opreator we can put left join with INGRP1 with INGRP2.
We can not make same join with INGRP3 & INGRP4 , becoz it failed saying "you cannot left outer join on more than one table/source".
so overall this OWB code makes incomplete left outer join as per the above ANSI SQL join in Oracle.
Bcoz of the problem we are getting less number of rows...........
SO please please help me on this
Regards
Ashok

Hi.
I know this topic is here for a while now, but I had the same problem today, searched for help and didn´t find anything.
Later I figured out how to do this.
You just have to put the (+) one time, and the OWB converts in an LEFT OUTER JOIN statement.
For this case, all you have to do is:
( INGRP1.branch_no = INGRP2.branch_no(+) AND INGRP1.item_no = INGRP2.item_no AND INGRP2.to_dt >= INGRP2.start_images )
Regards,
Godoy

BI 7.0 Left outer join in Infoset

Hi Everybody,
I am using BI 7.0 and have two cubes in my Infoset.
How do we set left outer join option in Infoset.
Thanks
Shilpa

Look at <a href="http://help.sap.com/saphelp_nw2004s/helpdata/EN/05/7ce2416149c717e10000000a155106/frameset.htm">this</a> page. Note the text: For performance reasons, you cannot define an InfoCube as the right operand of a left outer join. Hope this helps...

How can we make consecutive left outer joins in Composite Provider?

Hi,
For the following design:
Sales order and Delivery DSO's are unions on field Delivery Number.
Invoice(Billing DSO) is having left outer join and joins with Sales Order DSO's based on the field Sales Order Number.
Shipment DSO has left outer join, joins with Invoice DSO based on Delivery number.
My doubt here in this composite provider design, is more than one consecutive left outer joins(in Invoice, shipment dso join) are allowed?
Since this is possible in SAP ERP through writing abap codes, I came across that this kind of modelling is not possible in BW on Hana through Composite provide kindly suggest how can we achieve this design in SAP BW On hana.
Regards,
Antony Jerald.

Hi,
Could anyone please help me on this?
Hope, you are able to understand my question. Please suggest.
Regards,
Antony Jerald.

Using Left Outer Join

Hi SAP,
I have an access database with table called "Employee_ID". I am linking this table to a table called "Sales" in our main database and trying to report on January 2009.
There is one employee that is not appearing in my report. I know this employee has had no sales in Jan 2009. So, I tried linking the table using Left Outer Join and still this employee is not appearing in my report.
As a test, when I bring in Employee_ID table alone, the missing employee appears but when I try linking it INNER or LEFT OUTER join to table Sales, this employee does not appear.
Any help how I can bring the employee in from table Employee_ID?
Many thanks in advance,
Zack H.

Carl & Raghavendra,
Your suggestion led me to the finding my solution. Your suggestion brought back the missing employee but I needed all employees that had sales in January 2009 AND those that didn't. So I had to tweak your select expert formula as follows:
isnull({Sales.amt}) or
{Sales.period}="0109"
This brought back everything as needed! There was one negative about using this method. The performance was poor. It took a really long time to run.
To avoid having to wait for this to run and increase the performance, I had to go into the database and add a $0.00 sales amt for employee 2040 (or an empty sales amount record) in the month of January 2009. This brought back everyone also and it obviously increased the performance exponentially. Curious, why does it take forever to run using the above formula in select expert?
Thank you both Raghavendra and Carl for your relentless efforts to find a solution. You did it!
Zack H.

Left outer join query

Hi Experts,
 I am facing a problem with left outer join query. Am using one standard table and ztable for this join. My problem is values are not extracted from the Ztable.
Query:
 SELECT b~lifnr b~belnr b~gjahr b~xblnr b~shkzg b~blart b~zfbdt b~budat b~wrbtr
 b~wskto b~zlspr s~EXTRACT_STATUS s~maturity_date FROM bsik AS b
 LEFT OUTER JOIN zprm_rvne_sapdoc AS s
 ON s~belnr EQ b~belnr
 AND s~gjahr EQ b~gjahr
 INTO CORRESPONDING FIELDS OF TABLE it_join
 WHERE b~zlsch = p_zlsch
 AND b~xblnr IN so_invno
 ORDER BY b~lifnr b~xblnr.
I have all entries of BSIK table in Ztable with extract status as Y but this query is not fetching extract status and maturity date of ztable so it is blank in the internal table.
Need solution.
Regards
Sridevi S

Hi,
see the sample wiki for writing the Left outer join
http://wiki.sdn.sap.com/wiki/display/Snippets/EmployeeInfotype0000to9999ChangeHistory
Specifying Two or More Database Tables as a Left Outer Join
The left outer join, on the other hand, reads lines from the left-hand database table or join even if there is no corresponding line in the right-hand table.
SELECT...
FROM <tab> LEFT [OUTER] JOIN <dbtab> [AS <alias>] ON <cond>
 <options>
<tab> and <dbtab> are subject to the same rules and conditions as in an inner join. The OUTER addition is optional. The tables are linked in the same way as the inner join with the one exception that all lines selected from <tab> are included in the final selection. If <dbtab> does not contain any lines that meet the condition <cond>, the system includes a single line in the selection whose columns from <dbtab> are filled with null values.
In the left outer join, more restrictions apply to the condition <cond> than in the inner join. In addition to the above restrictions:
EQ or = is the only permitted relational operator.
There must be at least one comparison between columns from <tab> and <dbtab>.
The WHERE clause may not contain any comparisons with columns from <dbtab>. All comparisons using columns from <dbtab> must appear in the condition <cond>.
If we have two tables named stud1,stud2 with the following data
Stud1: id Name stud2: id Name
1 xxx 1 aaa
2 yyy 2 bbb
3 zzz 4 ccc
4 www 6 ddd
When we use Left Outer Join we get the output as:
1 aaa
2 bbb
3 <Null>
4 ccc
When we use Right Outer Join we get the output as:
1 aaa
2 bbb
4 ccc
<Null> ddd
When we use Full Outer Join we get the output as:
1 aaa
2 bbb
3 <Null>
4 ccc
<Null> ddd
Prabhudas

How to find Inner join or (Left)outer join for Infoset

Dear Experts,
We have one Infoset which is based on the Master data and DSO. It is linked 0BPARTNER field From the Master Data and SOLD TO PARTY field from the DSO.
Here Could you please suggest me how can we able to find that whether this Infoset is based on Inner Join or (Left) outer join.
Thanks and Regards,
Suresh.

HI Suresh,
If the infoset is based on left outer join , you see the respective table shaded in a dirrerent colour and also displays
that it is a left outer join in the connection
refer the below link for the details on left outer join , you can make a join as left outer from the context menu of the
object required
http://help.sap.com/erp2005_ehp_04/helpdata/EN/21/af0942b9dc9c39e10000000a155106/frameset.htm
Regards,
Sathya

How to Mark join as left outer join in Info set

Hi Folks,
I have 2 info cubes in Info set, I need to mark the join as Left outer join.
I have read some blogs where is says that it cant be joined, but one of my colleagues has made left outer join using two cubes.
I want to replicate the same thing into my design.
If i normally connect one IO to another cubes same IO- its a normal join- its not written as left outer join. I want to see left outer join written on my link.
I tried global setting but no use.
Am I missing some setting,

Hi Vivek,
Please have a look at SAP Note 577953 - @0S@ InfoSets (BW): Left outer joins.
The answer on question "3. How do I define a left outer join in InfoSet maintenance?" describes how you should proceed.
Best regards,
Sander

BI 7.0 Infoset - Infocube - Left outer join - query

Hi Expert,
A infoset contain Infocube and ODS, linked with left outer join, common fields are PO,PO item. PO account assignment ODS have three keyfields: PO Doc.,Item,account Assignment .
 PO Infocube PO Account Assignment ODS
PO PO item AmtPO Doc. Item AccAssignment Cost object
1000 10 230 1000 10 1 CC1
1001 10 250 1002 10 1 CC1
1002 10 150 1002 10 2 CC2
in BEx result are like this:
1000 10 230 1 CC1
1001 10 250 # #
1002 10 150 1 CC1
1002 10 150 2 CC2 ( amount only duplicated)
The issue was that amount gets duplicated. It only occurs if PO has more than one account assignment.
In report, we want show like this
1000 10 230 1 CC1
1001 10 250 # #
1002 10 150 1 CC1
1002 10 # 2 CC2
Any suggestion or input to overcome this issue?
Thanks,
Saran
Message was edited by:
 Saravanan K

Hi,
did you solve your problem? because I have the same issue right now: the left outer join doesn't seem to do its job.
Let me know if you have found a solution, it would be appreciated.
have a nice day,
Dominic

BI Infoset left outer join (NW04s)

I created an Infoset using a left outer join for infoproviders:
- 0FIGL_O10 (GL transaction figures - DSO )
- 0CCA_C03 (CCA Statistical key figures - CUBE)
DSO 0FIGL_O10 is the left table with joins on:
- 0COSTCENTER
- 0FISCPER
The data set returned by Infoset appears to be based on a SQL using an
inner join.
This appears to be a bug.
We are on BI 700 SP 15.

Hi Raynald - I did a demo with few records and it works fine for me. We are on 7, SP14.

Project Surplus / Project left-out Materials In SAP

Similar Messages

Maybe you are looking for