Project with PmodCLP module cannot synthesize --INTERNAL_ERROR:Xst:cmain.c:3423:1.29

Hey guys, I'm working on a project with a PmodCLP module. The PmodCLP module transfers data to a 16X2 LCD with a parallel interface. And I modified a demo code （ref:demo code)to adjust to my project, which resulted in an INTERNAL_ERROR:Xst:cmain.c:3423:1.29.(The demo code works perfect)
By searching for solutions, I have narrowed down that the problem is caused by (see the files attenched for complete code )
signal LCD_CMDS : LCD_CMDS_T := ( -- I changed constant to signal
0 => "00"&X"3C", --Function Set
1 => "00"&X"0C", --Display ON, Cursor OFF, Blink OFF
2 => "00"&X"01", --Clear Display
3 => "00"&X"02", --return home
4 => "10"&X"02", - -----the original demo code writes constant chars to LCD
--##################################### -- I want to transfer changable content
11 => "10" & sl2asc(mid_reg7(3 downto 0)), --code std_logic_vector to asc code
12 => "10"&X"20" --blank
); --Shift left
In the demo code, LCD_CMDS is constant, and I changed it to signal, then the error occured. Any ideas to fix the problem?

An INTERNAL_ERROR indicates that the tool was not able to handle the HDL code in this scenario.
Can you share the synthesis report , so that i can verify and suggest details?
Regards,
Achutha

Similar Messages

For the first time, I'm trying to use adobe premiere elements10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or

For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone

mike frischenmeyer
What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
know the details and troubleshoot to determined what caused the problem.
1. Can you open a new project?
2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
for that project?
3. Please review the Adobe document on troubleshooting damaged projects.
Troubleshoot damaged projects | Adobe Premiere Elements
4. What are the steps that you are using to reopen this saved closed project.
a. File Menu/Open Project/Name of Project
b. Other
Please review and consider and then we can decide what next based on your further details and results..
Thank you.
ATR

Error in running a URL for Web Module Project with a JSP

Hi Experts,
I created a Web Module Project with name "WebModuleProject".
I created a jsp file naming "test_jsp" inside it
Then i created a Web Archive for it which resulted in a WebModuleProject.war file.
I then created an Enterprise Module Project with name "EnterpriseWebModule"
Then i linked the "WebModuleProject" whith this project.
I created an EAR for this project.
Deployed that EAR on to hte J2EE Engine.
Now on applying the following url:
<a href="http://server:port/WebModuleProject/test_jsp.jsp">http://server:port/WebModuleProject/test_jsp.jsp</a>
i m getting the following error
404 Not Found
The requested resource /WebModuleProject/test_jsp.jsp is not available
Details: File [WebModuleProject/test_jsp.jsp] not found in application root of alias [/] of J2EE application [sap.com/com.sap.engine.docs.examples].
Please experts help me to dig out this problem
Can anybody suggest me why i m getting this error? And how to resolve it???????

Hi Saurabh,
In SMICM transaction code we have to maintain the parameters in order to run the web report in the specified format.
i am listing some parameters in the below, Please have a look and see whether it can help u out .....
Services
icm/server_port_0     = PROT=HTTP,PORT=8000
icm/server_port_1     = PROT=SMTP,PORT=0
HTTP settings
icm/HTTP/max_request_size_KB   = 102400
icm/HTTP/j2ee_0                = PREFIX=/,HOST=localhost,CONN=0-500,PORT=50000
icm/HTTP/server_cache_0        = PREFIX=/, CACHEDIR=/usr/sap/BSD/DVEBMGS00/dat
   a/cache
Misc
icm/host_name_full             = cauvery.com
icm/cancel_strategy            = cancel requests without session (stateless)
rdisp/plugin_auto_logout       = 1800
is/HTTP/virt_host_0            = :;
is/SMTP/virt_host_0            = :;
Once after maintain the parameters go and check in the SICF transaction code SAPBW---BEx + right click + test service. And check whether it is opening in the required URL path.
Regards,
Vara Prasad.

I have a FCP event and project with all accompanying media saved on a harddrive. I am now attempting to open the files on another computer that also has FCP X. I cannot figure out how to get it to open.

I have a FCP event and project with all accompanying media saved on a harddrive. I am now attempting to open the files on another computer that also has FCP X. I cannot figure out how to get it to open.

The events and projects folders have to be on the top level of the drive for FCP to recognize them.

Assistance with Error - virtualmachinemanager.psd1 module cannot be imported, one or more members are not valid.

Hello,
We use Orchestrator, System Center 2012 version 7.1.3022.0. I have an orchestrator script that reads through a txt file to find unresponsive virtual machines (Windows 2000 VM's cannot have the SCOM agent installed on them) so we can restart any
machines that are not responding.
The step to Get Computer/IP Status runs successfully in that it reports which VM's are running and which are not running. The next step then is to run a Powershell script that restart the VM's that are down. Here is my Powershell Script:
$ErrorActionPreference = "Stop"
try
Import-Module 'C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\psmodules\virtualmachinemanager'
Get-VMMServer -ComputerName mlivsmsscvmm
# get vm object
$vm = get-SCVirtualMachine | where { $_.ComputerName -eq "\`d.T.~Ed/{A255D4D8-BD4D-4FF4-9A51-B1ABA82720B9}.Computer-name\`d.T.~Ed/" }
# save data to publish for future activities
$OrigVMMStatus = $vm.StatusString;
$AlertAdded = "\`d.T.~Ed/{A4B4EC8A-E4F8-40AB-9897-6906EAE139AE}.TimeAdded\`d.T.~Ed/";
$VMName = $vm.Name;
# we are at this point because the VM is not responding.
# Start VM - if VM status is "Running" then Stop the VM first
if($vm.StatusString -eq "Running")
{ Stop-SCVirtualMachine -vm $vm -force };
Start-Sleep -s 20;
if($vm.StatusString -eq "Stopped")
{ Start-SCVirtualMachine -vm $vm
$VMrestart = "Yes"
catch
Throw $_.Exception
Upon running the Powershell script I receive the following error in Orchestrator Log histry:
The 'C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\psmodules\virtualmachinemanager\virtualmachinemanager.psd1' module cannot be
imported because its manifest contains one or more members that are not valid.
This script used to run without errors and nothing has been upgraded in our environment with regards to Orchestrator, VMM, SCOM. How would I find the 'one or more members' that is causing my issue?
Thank you.

Hi,
the thing is that PowerhShell in the "Run .Net Activity" is version 2.0 (http://www.sc-orchestrator.eu/index.php/scoblog/102-running-powershell-30-with-the-run-net-script-activity)
So, try your script embedded in PowerShell {}
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

How to reconcile Projects module with GL module?

Dear Experts / Dina,
If someone of you can help me in understanding the (Oracle provided) / (workaround) / mothod or procedure to reconcile Projects costing module with General ledger module ?
Does Oracle Provides seeded mothods for reconcilling projects with GL? or Customer needs to create custom reports? If yes then what is the principle of designing such report?
Your help on this is really appreciated.
Thanks

Unfortunately there is no easy answer to this. Oracle unfortunately do not provide a report that does this. To reconcile correctly you have to do it both ways i.e check that all that is in OP is in GL, and then all that ia in GL (that is project related) is in OP. This is because project related costs can get into GL and not get into OP (e.g. through AP). I won't launch into a detailed explaination, but the starting point in OP is a table called PA_COST_DISTRIBUTION_LINES_ALL which hold the most granular cost information and accounting CCID that can be used for reconciliation. Revenue reconciliation involves other table(s) depending on how you recognise revenue in OP.
There used to be a product called Complete Projects Reconciliation from a company called Projected Consulting (changed name to Project) that did this - have a look on Google. But they no longer offer this as a product (consulting solution now)
Hope this helps

I just got a Dell m110 projector which can do wireless projection. however I cannot project with my ipad...can anyone help me with this?

I just got a Dell m110 projector which can do wireless projection. however I cannot project with my ipad...can anyone help me with this?

u might need to download this app: mobishow-pro for dell projector
http://itunes.apple.com/au/app/mobishow-pro-for-dell-projector/id459389736?mt=8

Cannot create a project with netbeans 4.1

hi. i am using jdk1.5 update 3 with netbeans 4.1. my operating system is ubuntu linux 5.04. when i want to create a new project with netbeans i get this error:
javax.xml.transform.TransformerConfigurationException: Could not compile stylesheet
i open netbeans, click button "new project", select "General > Java Application", click "next" button.
project name: JavaApplication1
project location: /home/bsevindi
project folder: /home/bsevindi/JavaApplication1
when i click "finish" button, i get the error above. what should i do? BTW, i have compiled
a sample project and it works fine. the problem is only about creating a new project.

I suggest you post the question to a netbean users forum.
This forum is better for question regarding programming rather than how to use an IDE.

Cannot Start a new project with a mapped network drive

When I try to start a new project with Encore and save the file to our network cluster (An Isilon Server), I get a file not found error message. When I try to do this to a local drive, it works just fine. None of the other Adobe products (Photoshop, Illustrator, After Effects) have this problem with this network drive.
Greg Glaser

Yes, it worked on the local drive, and also to a Windows Networked Server that was not the Isilon. Even after creating the project and moving it to the Isilon, it was generating error messages after a few minutes of use. The Isilon is using a BSD variant of Linux and Samba. The really strange part is the all other Adobe products from the Production Suite work with this server without any problems at all.

Deploy Business Component Project with 3.2

I use the JDeveloper 3.2 to create a simple Buciness Component Project, with an application module, which contains only a table object(entity & view object). I follow the step of deplyment in the
on-line help to deploy the project as an EJB session Bean for 8i, (set the application Module's remote mode to "EJB Session Bean", create the deployment profile, than deploy it.) However, I got a lot of error message with the following err-code. Where am I wrong? Please help me. Thank You...
ORA-29521 referenced name string could not be found
ORA-29534 referenced object string.string could not be resolved
(I have successfully deploy a Business Component Project with JDeveloper 3.1.2 in another environment with the same Database schema. I have no idea why can't I deploy the project with
3.2?)
ERic

fter granted Java2 permissions, the above problem was solved, however, I got the following error message
when I deploy the business project:
Loading EJB Jar file and Comm Stubs Jar file...
Cannot locate the LoadJava server: Unknown reasons
*** Errors occurred while deploying the EJB to 8i JVM ***
can anyone help me?
ERic

How do I use iCloud to collaborate on a GarageBand project with a remotely located musician?

How do I use iCloud to collaborate on a GarageBand project with a remotely located musician? He is in Valencia, Spain, I am in Green Bay, Wisconsin. We'd like to be able to work on the same GarageBand document together, laying down tracks, etc.
Is there a tutorial I should look at?

Are you using GarageBand on a Mac or on an iPad?
With iCloud you can store your GarageBand projects in iCloud, so you can work on the same project on all your iPads, iPods, iPhones, and transfer it from your iDevices to your Mac. But you cannot use iCloud to share a project between people with different AppleIDs.
To send GarageBand projects back and forth, compress the the ":band" files and mail them, if they are small enough or put them in a Dropbox or other cloud storage and mail the link.

Is it possible to link data across different/multiple PWA sites leveraging Master Project with the Subprojects feature?

A couple different questions /similar scenarios
1) Is it possible with Project Server 2010 to have several sites (http://server/pwa1 and
http://server/pwa2 for example) communicate and build a Master Project at a third (or X) site (http://server/pwa3)
2) Is it possible with Project Server 2010 to have several sites (http://server/pwa1 and
http://server/pwa2 for example) communicate and build a Master Project at one of the original sites (http://server/pwa1 (for example))
OR is there a better way to do this/more preferred way to do this.
We found this (http://social.technet.microsoft.com/Forums/projectserver/en-US/2379c3f2-6c80-46d7-8eac-3bc2ccb2d908/master-projectsubproject-with-sites-in-pwa-2010?forum=projectserver2010general)
but its not what we're looking for
3a) Issue/Example -
We want to set up a site (http://server/pwa100) for just the president of the company - all the schedules of the subsites (/pwa99 + /pwa98) create a feed into an integrated master schedule/master project with subprojects(located
in /pwa100).
3b-1) We also want to set up sub sites (http://server/pwa99 and
http://server/pwa98) for each division VPs (and specific other people). These two sites would only allow specific user's project files to be viewed by each other...
Can their project files have linkages between the two project sites (/pwa99 and /pwa98)? Meaning if user1 logs in to /pwa99 can he see a project file (given that they have permission) from /pwa98 in the same instance?
3b-2) Can they see the project file in ProjPro and/or PWA ???
3c) is it possible to have:
+ /pwa100 (pres)
++/pwa99 & /pwa98 (two vps)
+++/pwa97 & /pwa96 & /pwa95 & /pwa-etc (minions)
each rolling up to the next level (level 3 rolls up to level 2 which can roll up to level 1)

kbwrecker,
I agree with Dale. Having multiple sites will make this difficult to set up.
Not knowing how your Custom Groups/Categories have been set up, have you looked into using the "Project Permissions" feature to share projects. These permissions are 'additive' to the category permissions, so you could start out with people looking at the
projects they are authorized to via categories, and then let them share/add people as needed basis. This will also satisfy the requirement of not-loading the projects with resources..
And finally, the department and categories need not align, except that when projects from one dept are shared t another dept resource, the visibility of custom fieds will be affected.
Hope I did not go off on a tangent there :)
Prasanna Adavi,PMP,MCTS,MCITP,MCT TWitter: @prasannaadavi Blog: http://www.prasannaadavi.com
Meant to get back to this earlier - your answer is close (because its what we currently do..sort-of)
From my understanding of this issue the users are separated by department and can only see specific projects; however, when they try to share departments between users (so they can see their projects (dept a sees dept b projects)) this works - but there
is a bigger issue/main issue.
main issue: when dept B adds a new project dept. A cannot see the new project in dept B.
This can be eliviated by removing the user/s and re-adding them to the permission structure of the deptment but overall doing this several times based on user/s and projects being added it gets to be cumbersome and just plain annoying.
Any help/additional thoughts would be great

Tried to "Open As" in PS a NEF file I modified in LR. Got the following error message: "Could not complete your request because the file format module cannot parse the file." I can "Open" the file in PS, but then the changes I made in LR (and saved in

Tried to "Open As" in PS a NEF file I modified in LR. Got the following error message: "Could not complete your request because the file format module cannot parse the file." I can "Open" the file in PS, but then the changes I made in LR (and saved in the associated meta data file with the "Control S" command) are not applied to the opened PS file. HELP!

If you are working with a file you modified in Lightroom, you should go to the Lightroom Photo menu and choose Edit in... and the version of Photoshop you want to open it in.
There a dialog will ask if you want to transfer the LR settings you made to your photo when you open in Photoshop.
Gene

I made a movie with iMovie and cannot get the audio when I burn into dvd. I would like to transfer video to a dvd to be played in any computer and TV

I made a movie with iMovie and cannot get the audio when I burn into dvd. I would like to transfer video to a dvd to be played in any computer and TV

Go to the Map mode in your iDVD project and make sure the blue bin at the left is empty. That's where you drag slideshows to if you want the DVD to open immediately to that slideshow and bypass the menu.
Click to view full size
If there is an item in there drag it out.
OT

Lack of modularity in Projects for EJB module

Problem
For a project you have many enterprise bean components. In JDeveloper, currently, all the information like persistence-type,
resource-reference, etc reside in the ejb-jar.xml which is project specific.
(1) In the real-world, developers work on different modules with small individual work spaces with a small number of
enterprise components and web compoents with a CVS system to manage version of the source code
(2) The developer works on the source and check it in the CVS repository
(3) A packager will take components from the CVS repository and make a build for a customer according to the order
(Build-to-Order approach)
(4) In JDeveloper he might have to make the ejb-jar.xml again which is very cumbersome and timeconsuming
Suggestion
(1) The current system of maintaining ejb-jar.xml in the project is OK
(2) But the information in the ejb-jar xml ABOUT EACH EJB COMPONENT should also be maintained at the EJB component level like
a small ejb-jar.xml file specific to the one and only one component.
(3) Whenever the EJB component id edited, this modular ejb-jar.xml file will be edited too.
(4) Later while making the main ejb-jar xml for deployment, the info in these small modular xml files will be read, the main
project level ejb-jar xml will be prepared.
(5) The main project level ejb-jar.xml can also be prepared when the project is rebuilt (clean/force compile) and all te
small modular files are updated.
With regards
Amit

Hello,
Yes we do read every OTN message, though we often have some internal discussion before we post a reply.
In your specific situation, you could just break up the EJBs into different projects:
- Each EJB module in a separate project.
- Each EJB project builds a separate EJB JAR.
- When assembling the EAR, pull in as many EJB JAR files as necessary to support the WAR and other pieces.
JDeveloper already has support for the above setup. Starting with JDev 9.0.3, you can also establish dependencies between projects to make the classes built by one project visible to another project's classpath.
For us to implement a complete solution where small ejb-jar.xml files are merged into one large ejb-jar.xml file, we'd like to understand how you'd go about resolving conflicts in elements being merged:
- conflicting <method-permission>
- conflicting <container-transaction>
- conflicting <relationship-role>
- conflicting <env-entry>
- ... a number of other potential conflicts ...
We could do automatic merges when there are no conflicts. For the situations where there are conflicts, can you describe some solutions that you would consider acceptable?

Project with PmodCLP module cannot synthesize --INTERNAL_ERROR:Xst:cmain.c:3423:1.29

Similar Messages

Maybe you are looking for