Projected Image size different using VGA and HDMI

From my ipad mini with a VGA connector I get a full screen image on an Epson projector but a much smaller image using an HDMI connector - How can I get a full screen with HDMI?

Good to know there are no menu's I have missed.   There are 2 things between the iPad and the projector - the HDMI cable and the mini display / HDMI adapter.  So as changing the HDMI cable did not help it must be the adapter.   Just to add I'm pretty sure the problem first arose after i upgraded to 8.1.2

Similar Messages

  • Image size different in debug and publish

    My project is purely actionscript based movie. I am trying to
    display an image file (jpg) that is received from the movie server.
    The image file displays with corect zoom dimensions when in
    development environment but after the movie is published...the
    image displays full size (612x494). It gets more
    wierd...occassionally it works correctly (displays image with
    correct zoom) after several tries of publishing the movie.
    Any ideas what might be the cause of this? Please help!!!
    regards,
    staylor
    >>>>>>>>>More
    Info:>>>>>>>>>
    the following code is executed to size up the image after
    image load is complete.
    viewPort_width_ = 450;
    viewPort_height_= 350;
    var zoom : Number = 1;
    var scale : Number = 100 * zoom;
    image_.scrollRect = new Rectangle(0 / zoom,0 /
    zoom,viewPort_width_ / zoom,viewPort_height_ / zoom);
    image_._xscale = image_._yscale = scale;

    The image on the left in PS looks the same in Picasa Image
    Viewer (I selected it to be color managed based on the monitor profile), looks the same in Windows Image Viewer, and looks the same in the thumbnail.  The image on the right in LR is how the picture looks when I look at my image in Firefox but in Internet Explorer and in Chrome, the image looks like the image on the left in PS.  The image below shows how the thumbnail looks different from the actual picture when it's double clicked and viewed in Picasa.  The thumbnail (which shows the subjects having green skin) would be how I saw it online while the double clicked version is how I saw it in PS, even though it was sRGB (I checked the image properties to make sure of the color space).
    I have a ATI 5470 GPU on my ASUS 17.3 inch laptop.  Not sure about the drivers.

  • Image size different in debug and in publish

    My project is purely actionscript based movie. I am trying to
    display an image file (jpg) that is received from the movie server.
    The image file displays with corect zoom dimensions when in
    development environment but after the movie is published...the
    image displays full size (612x494). It gets more
    wierd...occassionally it works correctly (displays image with
    correct zoom) after several tries of publishing the movie.
    Any ideas what might be the cause of this? Please help!!!
    regards,
    staylor
    >>>>>>>>>More
    Info:>>>>>>>>>
    the following code is executed to size up the image after
    image load is complete.
    viewPort_width_ = 450;
    viewPort_height_= 350;
    var zoom : Number = 1;
    var scale : Number = 100 * zoom;
    image_.scrollRect = new Rectangle(0 / zoom,0 /
    zoom,viewPort_width_ / zoom,viewPort_height_ / zoom);
    image_._xscale = image_._yscale = scale;

    The image on the left in PS looks the same in Picasa Image
    Viewer (I selected it to be color managed based on the monitor profile), looks the same in Windows Image Viewer, and looks the same in the thumbnail.  The image on the right in LR is how the picture looks when I look at my image in Firefox but in Internet Explorer and in Chrome, the image looks like the image on the left in PS.  The image below shows how the thumbnail looks different from the actual picture when it's double clicked and viewed in Picasa.  The thumbnail (which shows the subjects having green skin) would be how I saw it online while the double clicked version is how I saw it in PS, even though it was sRGB (I checked the image properties to make sure of the color space).
    I have a ATI 5470 GPU on my ASUS 17.3 inch laptop.  Not sure about the drivers.

  • I need to connect my Imac 27'' (newest version) up to 3/4 monitors (all 40'' LCD tv's with VGA and HDMI connections) with extended display to all external screens, not duplicate images. Is this possible?

    i need to connect my Imac 27'' (newest version) up to 3/4 monitors (all 40'' LCD tv's with VGA and HDMI connections) with extended display to all external screens, not duplicate images. Is this possible?

    I would suggest you visit an Apple dealer, preferably an Apple Store if there's one in your city, and ask for assistance in determining what you need. The questions and issues you bring up are rather complex to address in a technical support forum and would be better addressed in person where you and the salesperson can ask questions back and forth to arrive at the optimal setup.
    Regards.

  • Find monitor instance name , device name , resolution and frequency of multiple monitors (VGA and HDMI)

    hi,
    In my system multiple monitors are connected (VGA and  HDMI). In need to know the
    monitor instance name , device name , resolution and frequency of each monitor.. any solution?
    i used wm class 'WmiMonitorConnectionParams'  to determine Video output technology connection type and InstanceName.
    But i didn't get the device name , resolution and frequency of each monitor.??
    There are other wmi class like :
    WmiMonitorBrightnessEvent 
    WmiMonitorConnectionParams 
    WmiMonitorRawEEdidV1Block 
    WmiMonitorListedFrequencyRanges 
    WmiMonitorDigitalVideoInputParams 
    WmiMonitorAnalogVideoInputParams 
    WmiMonitorID 
    WmiMonitorBrightnessMethods 
    WmiMonitorBasicDisplayParams 
    WmiMonitorColorCharacteristics 
    WmiMonitorDescriptorMethods 
    WmiMonitorListedSupportedSourceM… 
    WmiMonitorBrightness 
    WmiMonitorColorXYZinCIE 
    WmiMonitorSupportedDisplayFeatures
     WmiMonitorBasicDisplayParams
     Win32_VideoController
    Win32_VideoConfiguration
    Win32_VideoSettings Win32_DisplayControllerConfiguration
    Win32_DisplayConfiguration
    But unable to determine monitor having  its corresponding values? please help me to find a solution .
    is there any other method to get multi monitor details?
    thank  you

    Hi sumith,
    I read some documents about WmiMonitorConnectionParams class, it should be able to get the video putput technology by the D3DKMDT_VIDEO_OUTPUT_TECHNOLOGY enumeration.
    D3DKMDT_VIDEO_OUTPUT_TECHNOLOGY enumeration
    So what happens when you are using WmiMonitorConnectionParams class? What prevent you? Anyway, please see a example of using WmiMonitorConnectionParams class, maybe you could get some hints on it.
    http://stackoverflow.com/questions/10085900/querying-wmi-for-d3dkmdt-video-output-technology
    Best regards,
    Shu Hu
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Can you use VGA and DisplayPort at the same time.

    I have a T500 with the ATI graphics. I currently have it set up with only a VGA monitor. I am wanting to also get the DisplayPort to VGA adapter. Will I still be able to use both external monitors and my laptop monitor? If anyone has done this let me know. I have read that you can use VGA and DVI but neither of my monitors have DVI.

    Exceptions are used when there are some mistakes , or exceeds the supposed values, we can highligt that in different colours for enabling the validator to notice easily. In this we are giving conditions for considering the value as exceptions. suppose, if the values is out of the range -1 to +1 then exception.
    But conditions can be considered as the restrictions given in measure level also. So please elaborate what you meant by conditions

  • HT4279 I have a Macbook Pro (late 2012) and I would like to connect it to 2 screens simultaneously (1 screen is a TV and can only take HDMI, the other is a larger computer screen and has both VGA and HDMI connections). How can I do this?

    I have a Macbook Pro (late 2012) and I would like to connect it to 2 screens simultaneously (1 screen is a TV and can only take HDMI, the other is a larger computer screen and has both VGA and HDMI connections). How can I do this?

    The article you cited refers to The Mac Pro, a 50lb silver tower -- not a notebook computer.
    Everymac.com says:
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600 (x2*)
    Details:
    *This model supports a simultaneous maximum resolution up to 2560x1600 on two external displays via Thunderbolt. Alternately, it can support a single display up to 2560x1600 via Thunderbolt and a single display up to 1920x1200 via HDMI. Although it can theoretically power all three external displays, as confirmed by a helpful reader, it runs too hot with three displays connected.
    Also see: How many external displays can the Retina Display MacBook Pro models support? What is the maximum supported resolution of each? Are adapters required?
    When using other than ThunderBolt displays, the ThunderBolt port is directly compatible with Mini DisplayPort, and can be forced into compatibility (with Single-Link DVI or HDMI up to 1920 wide) with a simple adapter.
    To adapt to wider displays, an ACTIVE Dual-Link adapter is needed, about US$100.

  • Image size changes after saving and then reopening

    I'm using CS6. For example I change the image size to a 4X6 and then save it. Then when I open the file it will be 7.5X5. What's the fix? Thanks for your time.

    I'm using Photoshop CS6 on a Windows 7 - 64 bit system. I'm using the Image Size dialog box and saving the file as a 4X6 at 300 dpi from a psd file to a jpeg file. When I open the file it is 5X7.5 inches at 240 dpi. I've been playing with it and have just figured out that when I save the file as a psd file it stays the size I've created and it changes when I save as a jpeg file. This is change is recent. It's worked properly in the past. Thanks for your help.
    Steve

  • Reinstall win 7, VGA and HDMI driver

    Hi everyone,
    2 problems
    1.I treid to reformat my hp probook 4320s and reinstall windows back to factory settings. I made a recovery disk when i first got it (at least im sure i did) and when i try to boot it says windows is loading files, i see the white bar accross the bottom moving along until 2/3rd of the way then it stops. Ive left it for 8 hours this way and it remains frozen. did i not create the disk properly?
    2. So instead i had a spare win 7 and reinstalled using that, i suspect the VGA and HDMI drivers are missing or something because now when i connect an external monitor via these 2 ports nothing comes up whereas it did before i reinstalled.
    Does anyone know which specific drivers i need? I looked on the support page but iv eno idea which one i need.

    Hi:
    Since your model can have either the Intel or AMD/Intel switchable graphics, there is no way of telling without some additional information.
    Go to the device manager and click to expand the Display Adapters category.
    When the graphics drivers are not installed, you will see a device labeled Standard VGA Adapter.
    If you see one listing of a Standard VGA adapter, then install the Intel HD graphics driver.
    If you see two listings of a Standard VGA adapter, then install the AMD graphics driver.
    The AMD graphics driver will install the drivers for both the AMD and Intel switchable graphics processors.
    As far as the recovery disk not working, it is anyone's guess as to why.
    You can order a set of recovery disks by contacting HP for the country you live in at the link below.
    http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  • I have my mac air hooked to the tv using thunderbolt and HDMI

    I have my mac air hooked to the tv using thunderbolt and HDMI the background screen and screen saver are the only things that will appear, but no icon's and cursor what I'm i missing?

    That's called the "extended desktop mode".  Your screen is logically extended to the right (by default).  Drag an application off the right side of your MBair screen and it'll appear on the TV.
    You can also toggle between extended desktop and mirror mode by pressing CMD F1.
    Visit all the settings in System Preferences > Displays > Arrangement tab.
    Regards,
    Captfred

  • Second monitor using VGA to HDMI or alternative?

    Hi, 
    I recently purchased a HP ENVY TouchSmart 15-j038tx Notebook PC.
    I have a Dell monitor, which only uses the VGA output. 
    I have a sony vaio VGA to HDMI adapter, and I tried this adapter with the monitor, it worked fine. I was able to use the monitor as second screen.
    However, when I use the same adapter on the HP computer, the second monitor is black and do not get recognised. 
    Can someone please helpe me!!!!
    Do I need to buy a new VGA to HDMI that's specifically built for HP computers?
    Or 
    Do I need to download some drivers to make this work? I just  updated the computer with the drivers as I purchased this only a few weeks ago. 
    or 
    Do I need to get a different adapter? like VGA to USB? Is there such a thing?
    The Dell monitor is about 5 years old, but if it works on my Sony Vaio Pro 13 Laptop that just got released, I don't see why it won't work on the HP too.
    Many Thanks

    There is a possibility that all you need to do is go into the display properties of the HP and have it look for the adapter.
    First the model number of the HP and then the Windows version that is installed, please.
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • Images resizing when using drag and drop

    We just recently got PS Elements 7. I have a blank image that is sized at 600 x 1662 pixels. When I want to put a photo into that blank, I make sure that the photo is 600 pixels high. With 6, what I used drag and drop from the bin, the photo fit perfectly. With 7 it is apparently resizing the photo and I have to stretch it to fit. Is this something that I have set wrong?  If I am making sure that both items should fit together based on number of pixels, why is one changing size? Something has to be changing size or the items would fit together. I am assuming that something is set wrong, because this just does not strike me a something that should happen, or the program is not a very efficient photo editor. If necessary I will go back to 5.0, although there are things that I like better in 7.
    jean @ buffaloworks

    I'm frankly surprised you had success with this in PSE 6, since the past two versions create a special kind of smart object from images dragged up from the bin. You can use copy/paste to create a regular layer, or you can drag down to a thumbnail in the bin from an open image, but the project bin doesn't let you drag up anymore, by design.
    Did you mean to say PSE 5 rather than 6? It worked normally there.

  • VGA and HDMI

    I am going to buy a new monitor. My firend suggested me to buy a TV instead. I have an ipad 4 and a macbook air. I also have lightning to VGA and mini display to VGA. Most of the TVs have HDMI input not VGA. I am planning to get a VGA to HDMI converter to fix it. Will it work?

    Instead of getting a VGA to HDMI converter, get a Mini DisplayPort to HDMI adapter and a HDMI cable, so you don't need a converter and there are more chances to make your TV work with your MacBook Air. See > http://support.apple.com/kb/HT4241
    The main benefit of using HDMI is the possibility to use a HD resolution on the TV if it allows you to use one of those

  • Older laptop connecting to Panasonic Viera using VGA to HDMI

    I have an older Pavilion Tx1000 that I would like to hook up to my new Panasonic Viera TV. I don't have an hdmi port on my laptop, but I do have a vga to hdmi cable. When I hook it up, the tv says no signal. The video card in my computer is an NVIDIA GeForce Go 6150. How do I get this to work?

    Your computer must have an HD compatible video card in order to use an HDMI connector.
    I would reccomend getting a VGA cable and use the VGA port on the TV instead.
    You will find it still provides a very good picture.

  • 2 questions - change image size within print cell, and saving print template w/ specific images

    Hi,
    Searched the forums for the answer to these but couldn't find much.
    1. Is there a way to change the image size within a cell (under print module). For example, zoom in 140% on a a specific image but still have it within the original cell size?
    2. Say I create and fill in an elaborate print template with my images - is there a way to save the FILLED IN version of the template to edit at a later time? For example if I wanted to load it back up w/ all the original images layed out in the print template, but maybe change a few and resave as jpeg?
    Thank you!

    Hi
    I'm not sure but maybe you can use a rectangle to hold the .ai image, resize the rectangle and fit proportionally the image inside it
    hope this help
    Eli

Maybe you are looking for