Provide ip to the client
it is there a way to provide the port to the client as the way we provide the ip , it is there any server similar to the dns server can provide it ??????
thank you for reply
steve
Hi,
I think you need to create an manual binding on your router based on your clients IP address and MAC address.
Have a look through the following link which explains how to achieve this:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800ca75c.html
Plus you need to add the following command to stop your router from leasing out the IP address of your default-router and thus causing ip conficts
ip dhcp excluded-address 172.18.100.1
Good luck
Paddy
Similar Messages
-
SharePoint Provided host app - The client webpart suddenly got removed
I have SharePoint provided host app and it contains one client webpart. I have added that webpart one of the pages in site after deploying the app in site.
Issue we are facing now:
The client webpart suddenly got removed from the page and no one has modified the page to delete the webpart.
And it is not listing in App parts while trying to add the webpart to page.
Is there any way to trace this issue?
Thanks,
Surya
Thanks, SuryaHi Surya,
Please try to restore page history per the article below:
http://rules.ssw.com.au/ITAndNetworking/Rules-to-Better-Sharepoint-for-End-Users/Pages/VersionHistory.aspx
If you need to dig out who changed it, you may check ULS log or audit log if you have audit feature enabled.
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
hello - I have done a series of edits on premiere cs6 and now need to transfer info to the client overseas so I have to transfer the rushes and would like to know what I need to provide ( list...) regarding the edit done on the CS6 version - thank you
>I have managed to download the footage onto Picture Motion Browser
Isn't Picture Motion Browser available for Windows only? If so, why are you posting in an Final Cut Express forum? My apologies if I'm incorrect.
-DH -
Hello,
When I try to install the client on the site server itself it gives me this error message and fails the ccmsetup. I only have this on the site server. Clients to other servers and computers are pushed fine. If I check the version of the MP it says 5.00.7958.1000
in ADSI. I removed the MP object in CN=System, CN=System Management. Waited for it to be regenerated automatically by SCCM but the installation doesn't work still.
I tried to install with several methods including directly from ccmsetup.exe in ccmsetup folder, pushing by sccm itself, running from commandline, ...
I run SCCM 2012 R2 on Windows Server 2008 R2 and the database on SQL 2008 on Server 2008 R2
Below you find the ccmsetup.log:
<![LOG[==========[ ccmsetup started in process 5072 ]==========]LOG]!><time="07:29:25.392-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="7532" file="ccmsetup.cpp:9437">
<![LOG[Running on platform X64]LOG]!><time="07:29:25.393-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="7532" file="util.cpp:1837">
<![LOG[Updated security on object C:\Windows\ccmsetup\cache\.]LOG]!><time="07:29:25.394-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="7532" file="ccmsetup.cpp:9281">
<![LOG[Launch from folder C:\Windows\ccmsetup\]LOG]!><time="07:29:25.394-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="7532" file="ccmsetup.cpp:721">
<![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="07:29:25.395-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="7532" file="ccmsetup.cpp:727">
<![LOG[In ServiceMain]LOG]!><time="07:29:25.397-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmsetup.cpp:3365">
<![LOG[Running on 'Microsoft Windows Server 2008 R2 Enterprise ' (6.1.7601). Service Pack (1.0). SuiteMask = 274. Product Type = 18]LOG]!><time="07:29:25.490-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="util.cpp:1919">
<![LOG[Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="07:29:25.491-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:3590">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="07:29:25.491-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:3775">
<![LOG[Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="07:29:25.491-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:3776">
<![LOG[SslState value: 224]LOG]!><time="07:29:25.499-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmsetup.cpp:4425">
<![LOG[CCMHTTPPORT: 80]LOG]!><time="07:29:25.511-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:8617">
<![LOG[CCMHTTPSPORT: 443]LOG]!><time="07:29:25.511-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:8632">
<![LOG[CCMHTTPSSTATE: 224]LOG]!><time="07:29:25.511-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:8650">
<![LOG[CCMHTTPSCERTNAME: ]LOG]!><time="07:29:25.511-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:8668">
<![LOG[FSP: SCCMSRV-02]LOG]!><time="07:29:25.511-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:8720">
<![LOG[CCMFIRSTCERT: 1]LOG]!><time="07:29:25.511-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:8778">
<![LOG[Config file: C:\Windows\ccmsetup\MobileClientUnicode.tcf]LOG]!><time="07:29:25.513-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4539">
<![LOG[Retry time: 10 minute(s)]LOG]!><time="07:29:25.513-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4540">
<![LOG[MSI log file: C:\Windows\ccmsetup\Logs\client.msi.log]LOG]!><time="07:29:25.513-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4541">
<![LOG[MSI properties: INSTALL="ALL" SMSSITECODE="ZAV" FSP="SCCMSRV-02" DISABLESITEOPT="TRUE" SMSCACHEDIR="CACHE" SMSCACHEFLAGS="MAXDRIVE" SMSCACHESIZE="20000" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"]LOG]!><time="07:29:25.514-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4542">
<![LOG[Source List:]LOG]!><time="07:29:25.514-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4550">
<![LOG[ \\SCCMSRV-02.snba.be\SMSClient]LOG]!><time="07:29:25.514-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4557">
<![LOG[ \\SCCMSRV-02.SNBA.BE\SMSClient]LOG]!><time="07:29:25.514-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4566">
<![LOG[MPs:]LOG]!><time="07:29:25.514-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4569">
<![LOG[ SCCMSRV-02.snba.be]LOG]!><time="07:29:25.514-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:4584">
<![LOG[No version of the client is currently detected.]LOG]!><time="07:29:25.520-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:2748">
<![LOG[Task 'Configuration Manager Client Retry Task' does not exist]LOG]!><time="07:29:25.525-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="wintask.cpp:634">
<![LOG[Updated security on object C:\Windows\ccmsetup\.]LOG]!><time="07:29:25.529-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmsetup.cpp:9281">
<![LOG[Sending Fallback Status Point message to 'SCCMSRV-02', STATEID='100'.]LOG]!><time="07:29:25.530-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:9756">
<![LOG[Failed to get client version for sending messages to FSP. Error 0x80041010]LOG]!><time="07:29:25.534-120" date="04-17-2014" component="ccmsetup" context="" type="2" thread="2724" file="ccmsetup.cpp:9838">
<![LOG[Params to send FSP message '5.0.7958.1000 Deployment ']LOG]!><time="07:29:25.535-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmsetup.cpp:9887">
<![LOG[State message with TopicType 800 and TopicId {C6441082-A993-4410-9F89-D4CCB6624ED0} has been sent to the FSP]LOG]!><time="07:29:25.676-120" date="04-17-2014" component="FSPStateMessage" context="" type="1" thread="2724" file="fsputillib.cpp:752">
<![LOG[Running as user "SYSTEM"]LOG]!><time="07:29:25.693-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:1995">
<![LOG[Detected 20167 MB free disk space on system drive.]LOG]!><time="07:29:25.693-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="util.cpp:628">
<![LOG[Checking Write Filter Status.]LOG]!><time="07:29:25.694-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:2024">
<![LOG[This is not a supported write filter device. We are not in a write filter maintenance mode.]LOG]!><time="07:29:25.694-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:2051">
<![LOG[Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=ZAV))']LOG]!><time="07:29:25.716-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="lsad.cpp:656">
<![LOG[OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>224</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>ZAV</RootSiteCode><CCM> <CommandLine>SMSSITECODE=ZAV FSP=SCCMSRV-02 DISABLESITEOPT=True SMSCACHEDIR=Cache SMSCACHEFLAGS=MAXDRIVE SMSCACHESIZE=20000</CommandLine> </CCM><FSP> <FSPServer>SCCMSRV-02.snba.be</FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0" /></Capabilities><Domain Value="snba.be" /><Forest Value="snba.be" /></ClientOperationalSettings>']LOG]!><time="07:29:26.401-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="lsadcache.cpp:236">
<![LOG[HTTP is selected for Client. The current state is 0.]LOG]!><time="07:29:26.403-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmutillib.cpp:420">
<![LOG[The MP name retrieved is 'SCCMSRV-02.snba.be' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>']LOG]!><time="07:29:26.404-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="lsadcache.cpp:334">
<![LOG[MP 'SCCMSRV-02.snba.be' is compatible]LOG]!><time="07:29:26.404-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="lsadcache.cpp:339">
<![LOG[Retrieved 1 MP records from AD for site 'ZAV']LOG]!><time="07:29:26.404-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="lsadcache.cpp:287">
<![LOG[Retrived site version '5.00.7958.1000' from AD for site 'ZAV']LOG]!><time="07:29:26.405-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="siteinfo.cpp:575">
<![LOG[SiteCode: ZAV]LOG]!><time="07:29:26.405-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:2076">
<![LOG[SiteVersion: 5.00.7958.1000]LOG]!><time="07:29:26.406-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:2077">
<![LOG[Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again.]LOG]!><time="07:29:26.406-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:2111">
<![LOG[Deleted file C:\Windows\ccmsetup\client.msi]LOG]!><time="07:29:26.413-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:9493">
<![LOG[Only one MP SCCMSRV-02.snba.be is specified. Use it.]LOG]!><time="07:29:26.414-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:10080">
<![LOG[Searching for DP locations from MP(s)...]LOG]!><time="07:29:26.414-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:11018">
<![LOG[Current AD site of machine is DAT]LOG]!><time="07:29:26.415-120" date="04-17-2014" component="LocationServices" context="" type="1" thread="2724" file="lsad.cpp:770">
<![LOG[Local Machine is joined to an AD domain]LOG]!><time="07:29:26.415-120" date="04-17-2014" component="LocationServices" context="" type="0" thread="2724" file="lsad.cpp:714">
<![LOG[Current AD forest name is snba.be, domain name is snba.be]LOG]!><time="07:29:26.419-120" date="04-17-2014" component="LocationServices" context="" type="1" thread="2724" file="lsad.cpp:842">
<![LOG[DhcpGetOriginalSubnetMask entry point is supported.]LOG]!><time="07:29:26.424-120" date="04-17-2014" component="LocationServices" context="" type="0" thread="2724" file="ccmiputil.cpp:117">
<![LOG[Begin checking Alternate Network Configuration]LOG]!><time="07:29:26.424-120" date="04-17-2014" component="LocationServices" context="" type="0" thread="2724" file="ccmiputil.cpp:1095">
<![LOG[Finished checking Alternate Network Configuration]LOG]!><time="07:29:26.433-120" date="04-17-2014" component="LocationServices" context="" type="0" thread="2724" file="ccmiputil.cpp:1172">
<![LOG[Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="ZAV"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0" UseInternetDP="0">
<ADSite Name="DAT"/>
<Forest Name="snba.be"/>
<Domain Name="snba.be"/>
<IPAddresses>
<IPAddress SubnetAddress="172.31.20.0" Address="172.31.20.101"/>
<IPAddress SubnetAddress="172.31.105.0" Address="172.31.105.17"/>
<IPAddress SubnetAddress="172.31.109.0" Address="172.31.109.135"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
']LOG]!><time="07:29:26.441-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="siteinfo.cpp:96">
<![LOG[Sending message header '<Msg SchemaVersion="1.1"><ID>{76CC1A6C-D696-4C32-82D6-4F56FCA9E926}</ID><SourceHost>SCCMSRV-02</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:SCCMSRV-02:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>SCCMSRV-02.snba.be</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-04-17T05:29:26Z</SentTime><Body Type="ByteRange" Offset="0" Length="1338"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="07:29:26.441-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="siteinfo.cpp:177">
<![LOG[CCM_POST 'HTTP://SCCMSRV-02.snba.be/ccm_system/request']LOG]!><time="07:29:26.442-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="httphelper.cpp:807">
<![LOG[Content boundary is '--aAbBcCdDv1234567890VxXyYzZ']LOG]!><time="07:29:27.999-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="httphelper.cpp:1972">
<![LOG[Received header '<Msg SchemaVersion="1.1">
<ID>{431A4120-7DA1-4EF2-8A6C-2EDEF4D9E169}</ID>
<SourceID>GUID:1C3F455F-F166-4B50-BE8E-68FD4F565096</SourceID>
<SourceHost>SCCMSRV-02</SourceHost>
<TargetAddress>direct:SCCMSRV-02:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<TargetHost>SCCMSRV-02</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-04-17T05:29:27Z</SentTime><Body Type="ByteRange" Offset="0" Length="2504"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property Name="AuthSenderMachine">SCCMSRV-02;SCCMSRV-02.snba.be;</Property><Property Name="MPSiteCode">ZAV</Property></Hook></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="07:29:27.999-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="httphelper.cpp:1724">
<![LOG[Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="ZAV" MasterSiteCode="ZAV" SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114" Signature="http://SCCMSRV-02.snba.be/SMS_DP_SMSSIG$/ZAV00114"/><ADSite Name="DAT"/><IPSubnets><IPSubnet Address="172.31.20.0"/><IPSubnet Address="172.31.109.0"/><IPSubnet Address="172.31.105.0"/><IPSubnet Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>SCCMSRV-02.snba.be</ServerRemoteName><DPType>SERVER</DPType><Windows Trust="1"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="ZAV00114" FullPackageVersion="1" FullPackageHash="BFC11E099E8F451107B43E0DBEFD93B01DB2D6453DA74F8A2CB94B73D676C1CD" MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30357216;2152392064" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>']LOG]!><time="07:29:28.000-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="siteinfo.cpp:221">
<![LOG[Found local location 'http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114']LOG]!><time="07:29:28.001-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="siteinfo.cpp:351">
<![LOG[Discovered 1 local DP locations.]LOG]!><time="07:29:28.002-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:11153">
<![LOG[PROPFIND 'http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114']LOG]!><time="07:29:28.002-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="httphelper.cpp:807">
<![LOG[Using DP location http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114]LOG]!><time="07:29:28.009-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:11395">
<![LOG[GET 'http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114/ccmsetup.cab']LOG]!><time="07:29:28.009-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="httphelper.cpp:807">
<![LOG[C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted.]LOG]!><time="07:29:28.090-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="util.cpp:1465">
<![LOG[Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab.]LOG]!><time="07:29:28.101-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:6670">
<![LOG[Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from manifest]LOG]!><time="07:29:28.104-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="siteinfo.cpp:668">
<![LOG[Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000']LOG]!><time="07:29:28.104-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="siteinfo.cpp:703">
<![LOG[Site version '5.00.7958.1000' is compatible. Client deployment will continue.]LOG]!><time="07:29:28.104-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="siteinfo.cpp:726">
<![LOG[Location 'http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114' passed site version check.]LOG]!><time="07:29:28.104-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:6809">
<![LOG[Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml]LOG]!><time="07:29:28.104-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:153">
<![LOG[Successfully loaded ccmsetup manifest file.]LOG]!><time="07:29:28.106-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:171">
<![LOG[Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000']LOG]!><time="07:29:28.106-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:10475">
<![LOG[Running from temp downloaded folder or manifest is not newer than ccmsetup.]LOG]!><time="07:29:28.107-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:2213">
<![LOG[Item 'i386/vcredist_x86.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.212-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Item 'x64/vcredist_x64.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.269-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Item 'i386/vc50727_x86.exe' is not applicable.]LOG]!><time="07:29:28.269-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'x64/vc50727_x64.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.325-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Item 'i386/WindowsUpdateAgent30-x86.exe' is not applicable.]LOG]!><time="07:29:28.325-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'x64/WindowsUpdateAgent30-x64.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.380-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Item 'i386/msxml6.msi' is not applicable.]LOG]!><time="07:29:28.380-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'x64/msxml6_x64.msi' is applicable. Add to the list.]LOG]!><time="07:29:28.433-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Item 'i386/msrdcoob_x86.exe' is not applicable.]LOG]!><time="07:29:28.433-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'x64/msrdcoob_amd64.exe' is not applicable.]LOG]!><time="07:29:28.434-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'pkgmgr.exe' is not applicable.]LOG]!><time="07:29:28.434-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'dism.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.504-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Item 'wimgapi.msi' is not applicable.]LOG]!><time="07:29:28.504-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'i386/MicrosoftPolicyPlatformSetup.msi' is not applicable.]LOG]!><time="07:29:28.504-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'x64/MicrosoftPolicyPlatformSetup.msi' is applicable. Add to the list.]LOG]!><time="07:29:28.560-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Item 'i386/WindowsFirewallConfigurationProvider.msi' is not applicable.]LOG]!><time="07:29:28.561-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'x64/WindowsFirewallConfigurationProvider.msi' is applicable. Add to the list.]LOG]!><time="07:29:28.615-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Item 'i386/Silverlight.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.670-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Item 'i386/wic_x86_enu.exe' is not applicable.]LOG]!><time="07:29:28.670-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'x64/wic_x64_enu.exe' is not applicable.]LOG]!><time="07:29:28.670-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'i386/dotNetFx40_Client_x86_x64.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.723-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Item 'SCEPInstall.exe' is applicable. Add to the list.]LOG]!><time="07:29:28.779-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Item 'i386/client.msi' is not applicable.]LOG]!><time="07:29:28.779-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:348">
<![LOG[Item 'x64/client.msi' is applicable. Add to the list.]LOG]!><time="07:29:28.841-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:343">
<![LOG[Default CSP is Microsoft Enhanced RSA and AES Cryptographic Provider]LOG]!><time="07:29:28.842-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmutillib.cpp:1363">
<![LOG[Default CSP Type is 24]LOG]!><time="07:29:28.842-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmutillib.cpp:1364">
<![LOG[Discovering whether item 'i386/vcredist_x86.exe' exists.]LOG]!><time="07:29:28.842-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[Detected item 'i386/vcredist_x86.exe']LOG]!><time="07:29:28.842-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
<![LOG[Discovering whether item 'x64/vcredist_x64.exe' exists.]LOG]!><time="07:29:28.842-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[Detected item 'x64/vcredist_x64.exe']LOG]!><time="07:29:28.843-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
<![LOG[Discovering whether item 'x64/vc50727_x64.exe' exists.]LOG]!><time="07:29:28.843-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[Upgrade code '{A8D19029-8E5C-4E22-8011-48070F9E796E}': product = '{ad8a2fa1-06e7-4b0d-927d-6e54b3d31028}', installed = 1, version = 8.0.61000]LOG]!><time="07:29:28.843-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="msiutil.cpp:1273">
<![LOG[Checking '{A8D19029-8E5C-4E22-8011-48070F9E796E}' version '8.0.61000' expecting >= '8.0.61000'.]LOG]!><time="07:29:28.844-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="manifest.cpp:873">
<![LOG[Detected item 'x64/vc50727_x64.exe']LOG]!><time="07:29:28.844-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
<![LOG[Discovering whether item 'x64/WindowsUpdateAgent30-x64.exe' exists.]LOG]!><time="07:29:28.844-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[Checking file 'C:\Windows\system32\wuapi.dll' version '7.6.7600.0256' expecting >= '7.4.7600.226'.]LOG]!><time="07:29:28.846-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="manifest.cpp:1278">
<![LOG[Detected item 'x64/WindowsUpdateAgent30-x64.exe']LOG]!><time="07:29:28.846-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
<![LOG[Discovering whether item 'x64/msxml6_x64.msi' exists.]LOG]!><time="07:29:28.846-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[Checking file 'C:\Windows\system32\msxml6.dll' version '6.30.7601.17857' expecting >= '6.10.1129.0'.]LOG]!><time="07:29:28.847-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="manifest.cpp:1278">
<![LOG[Detected item 'x64/msxml6_x64.msi']LOG]!><time="07:29:28.847-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
<![LOG[Discovering whether item 'dism.exe' exists.]LOG]!><time="07:29:28.847-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[File 'C:\Windows\system32\msrdc.dll' exists. Discovery passed]LOG]!><time="07:29:28.848-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="manifest.cpp:1250">
<![LOG[Detected item 'dism.exe']LOG]!><time="07:29:28.848-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
<![LOG[Discovering whether item 'x64/MicrosoftPolicyPlatformSetup.msi' exists.]LOG]!><time="07:29:28.848-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[Upgrade code '{19B9818B-7432-49E9-BC02-B126025EE235}': product = '{90D295B8-BA08-487E-B904-0E624209A410}', installed = 1, version = 1.2.3602.0]LOG]!><time="07:29:28.849-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="msiutil.cpp:1273">
<![LOG[Checking '{19B9818B-7432-49E9-BC02-B126025EE235}' version '1.2.3602.0' expecting >= '1.2.3602.0'.]LOG]!><time="07:29:28.849-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="manifest.cpp:873">
<![LOG[Detected item 'x64/MicrosoftPolicyPlatformSetup.msi']LOG]!><time="07:29:28.849-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
<![LOG[Discovering whether item 'x64/WindowsFirewallConfigurationProvider.msi' exists.]LOG]!><time="07:29:28.849-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[Validated file 'C:\Windows\ccmsetup\WindowsFirewallConfigurationProvider.msi' hash '3BF0651FD4A01170925CEF694468D4EF6F64D76FD3413DEBD14CB8DE019AA10E']LOG]!><time="07:29:28.868-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="util.cpp:2609">
<![LOG[File 'C:\Windows\ccmsetup\WindowsFirewallConfigurationProvider.msi' exists. Discovery passed]LOG]!><time="07:29:28.868-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="manifest.cpp:1250">
<![LOG[Detected item 'x64/WindowsFirewallConfigurationProvider.msi']LOG]!><time="07:29:28.868-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
<![LOG[Discovering whether item 'i386/Silverlight.exe' exists.]LOG]!><time="07:29:28.869-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[32-bit Hive selected]LOG]!><time="07:29:28.869-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:948">
<![LOG[Detected item 'i386/Silverlight.exe']LOG]!><time="07:29:28.869-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
<![LOG[Discovering whether item 'i386/dotNetFx40_Client_x86_x64.exe' exists.]LOG]!><time="07:29:28.869-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[Detected item 'i386/dotNetFx40_Client_x86_x64.exe']LOG]!><time="07:29:28.869-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
<![LOG[Discovering whether item 'SCEPInstall.exe' exists.]LOG]!><time="07:29:28.870-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[Validated file 'C:\Windows\ccmsetup\SCEPInstall.exe' hash 'FDDB17A148D8358B5BFBF63BBB3CDE902DCE807366081FE16B8E6042DCB47C71']LOG]!><time="07:29:29.649-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="util.cpp:2609">
<![LOG[Checking file 'C:\Windows\ccmsetup\SCEPInstall.exe' version '4.3.0220.0000' expecting >= '4.3.220.0'.]LOG]!><time="07:29:29.651-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="manifest.cpp:1278">
<![LOG[Detected item 'SCEPInstall.exe']LOG]!><time="07:29:29.651-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:614">
<![LOG[Discovering whether item 'x64/client.msi' exists.]LOG]!><time="07:29:29.651-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:553">
<![LOG[Item x64/client.msi has not been installed yet. Put to pending install list.]LOG]!><time="07:29:29.651-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="manifest.cpp:609">
<![LOG[PROPFIND 'http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114']LOG]!><time="07:29:29.651-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="httphelper.cpp:807">
<![LOG[No client patches are detected.]LOG]!><time="07:29:29.658-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmsetup.cpp:1736">
<![LOG[PROPFIND 'http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114']LOG]!><time="07:29:29.658-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="httphelper.cpp:807">
<![LOG[No client language packs are detected.]LOG]!><time="07:29:29.664-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmsetup.cpp:1777">
<![LOG[Searching for available transform]LOG]!><time="07:29:29.665-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:1807">
<![LOG[PROPFIND 'http://SCCMSRV-02.snba.be/SMS_DP_SMSPKG$/ZAV00114']LOG]!><time="07:29:29.665-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="httphelper.cpp:807">
<![LOG[No transform available for this locale. Installation will proceed with no transformation.]LOG]!><time="07:29:29.671-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:1892">
<![LOG[File 'C:\Windows\ccmsetup\client.msi' doesn't exist.]LOG]!><time="07:29:29.672-120" date="04-17-2014" component="ccmsetup" context="" type="2" thread="2724" file="util.cpp:2595">
<![LOG[Using branch cache option.]LOG]!><time="07:29:29.690-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:6443">
<![LOG[Adding file 'http://SCCMSRV-02.snba.be:80/SMS_DP_SMSPKG$/ZAV00114/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'.]LOG]!><time="07:29:29.690-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:6474">
<![LOG[Starting BITS download for client deployment files.]LOG]!><time="07:29:29.698-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:6487">
<![LOG[Download Update: 32616448 out of 32616448 bytes transferred.]LOG]!><time="07:29:30.700-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:6578">
<![LOG[Successfully completed BITS download for client deployment files.]LOG]!><time="07:29:32.701-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:6536">
<![LOG[Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package]LOG]!><time="07:29:34.020-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="siteinfo.cpp:678">
<![LOG[Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000']LOG]!><time="07:29:34.020-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="siteinfo.cpp:703">
<![LOG[Site version '5.00.7958.1000' is compatible. Client deployment will continue.]LOG]!><time="07:29:34.020-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="siteinfo.cpp:726">
<![LOG[Successfully downloaded client files via BITS.]LOG]!><time="07:29:34.020-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:1396">
<![LOG[Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878']LOG]!><time="07:29:35.032-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="util.cpp:2609">
<![LOG[An MP exists on this machine.]LOG]!><time="07:29:35.048-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="msiutil.cpp:565">
<![LOG[The client version 5.00.7958.1000 does not match the MP version 5.00.7804.1000. The client will not be installed.]LOG]!><time="07:29:35.048-120" date="04-17-2014" component="ccmsetup" context="" type="3" thread="2724" file="msiutil.cpp:583">
<![LOG[Sending Fallback Status Point message to 'SCCMSRV-02', STATEID='318'.]LOG]!><time="07:29:35.049-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="2724" file="ccmsetup.cpp:9756">
<![LOG[Failed to get client version for sending messages to FSP. Error 0x80041010]LOG]!><time="07:29:35.054-120" date="04-17-2014" component="ccmsetup" context="" type="2" thread="2724" file="ccmsetup.cpp:9838">
<![LOG[Params to send FSP message '5.0.7958.1000 Deployment ']LOG]!><time="07:29:35.054-120" date="04-17-2014" component="ccmsetup" context="" type="0" thread="2724" file="ccmsetup.cpp:9887">
<![LOG[State message with TopicType 800 and TopicId {5FF017B3-AF3F-4D38-B037-0A7EE1F479C5} has been sent to the FSP]LOG]!><time="07:29:35.075-120" date="04-17-2014" component="FSPStateMessage" context="" type="1" thread="2724" file="fsputillib.cpp:752">
<![LOG[InstallFromManifest failed 0x80004005]LOG]!><time="07:29:35.084-120" date="04-17-2014" component="ccmsetup" context="" type="3" thread="2724" file="ccmsetup.cpp:7202">
<![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="07:29:35.086-120" date="04-17-2014" component="ccmsetup" context="" type="1" thread="7532" file="ccmsetup.cpp:10879">
I hope someone can help me with this.
Kind regardsI agree with Idan. You can easily remove the Management Point Site System role and add it again with no adverse effect. This should solve your problem.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
App-V 5 Full Infrastructure Apps take long time to stream to the client
Hi was wondering if anyone has the same issue as i am or knows a fix for this, below is my problem and the troubleshooting i have done.
Overview of problem
App-V 5 apps delivered via App-V 5 full infrastructure take a long time to stream to the client and this means the user has to wait if they try and run an application before it has streamed to the client. Users sometimes have to
wait 2 or 3 minutes for an application to stream and this is about 40 times slower than basic SMB and HTTP transfer tests show the system is capable of (see performance results below).
App-V 4.6 apps delivered via App-V 4.6 full infrastructure and HTTP streaming are fine.
Overview of environment
App-V 5.0 SP1 Full Infrastructure.
App-V servers are running Server 2012 on Hyper-V 3 or ESX 5.1 with 2 x vCPU and 4GB RAM.
SQL servers are a SQL 2012 cluster.
Separate servers for SQL, management, publishing, content and reporting.
Management, Publishing and Content servers have two servers per role and NLB to provide load balancing. So 7 servers (2 x Man, 2 x Pub, 2 x Content, 1 x Reporting)
Two further sites with 2 x Pub and 2 x Content each. All publishing servers pointed at the load balance address for management.
Content delivered via HTTP
Clients are physical desktops and laptops running Windows 7 SP1 x86 and Windows 8 x86
App-V client is 5.0SP1
Clients are pointed at their nearest publishing server NLB via a script which looks up the client IP address and uses PowerShell to configure the publishing server
Content is streamed from the nearest content server NLB by setting the PackageSourceRoot to the nearest content NLB (via the same PowerShell script above).
App-V apps delivered per-user via AD group. One AD group per application. Approximately 200 App-V apps published so far - will eventually reach 400 as we sequence more. About 9000 users.
Analysis performed so far
Servers not heavily loaded. CPU averages 5%. Lots of RAM free. Very low disk IO. Problem also occurs out-of-hours so we are 99.9% certain that server resources are not a cause.
Streaming performance is the same from all 6 content servers and all 3 NLB addresses (tested by changing the value of PackageSourceRoot). Wireshark used to confirm packages are really streaming from the correct location, enforcing
our belief that the problem isn't at the server end (unless all 6 servers are affected).
Streaming via both HTTP and SMB2.1 is approximately the same (tested by changing the value of PackageSourceRoot between http://xxxx and \\server\AppVContent).
Wireshark used to confirm we really are using the protocol we think we are using.
All clients exhibit the same behaviour. Issue reported by many users. 5 test PCs chosen at random at all 3 sites confirmed to have the slow streaming problem.
Slow streaming from both Hyper-V and VMware ESX servers.
Client not heavily loaded.
Affects all App-V apps although it obviously affects the larger ones more.
All App-V apps have a Feature Block 1 setup.
If we copy the ".appv" file from the server to the client via either HTTP or SMB then it's reasonably quick (up to 480Mb/s). So we don't believe the network or servers are at fault. For example:
We can copy a 149MB .appv file via SMB from the content server to the client in 5 seconds.
We copy HTTP download the .appv file from the content server using IE on the client in 5 seconds.
But if you ask the App-V 5 client to fully download the sequence then it takes 2 - 3 minutes.
The App-V 4.6 client takes about 8 - 10 seconds to fully download a similar sized application.
App-V 5 publishing works fine - when a new user logs on they get their list of application straight away, it's just the streaming which is slow.
Once the App-V app has streamed locally it runs fine and with a decent performance.
Looking at a Wireshark trace of the streaming you can see that the slow performance is due to the transfer stopping and starting a lot. You only notice this when you zoom into the performance graph a fair bit.
Each time the HTTP server stops sending traffic, it doesn't start again until the client sends a "TCP Window update". Each "stop" is of a different length, but just taking a few from the middle I get 0.06s, 0.11s,
0.13s wasted etc.
I can see that it's the client stopping the transfer by reducing its advertised TCP Window Size. I'll provide an example:
Server sends 9 x 1514 bytes. Client responds with an ACK and a Window size of 54016 bytes (256x211)
Server sends 11 x 1514 bytes. Client responds with an ACK and a Window size of 37888 bytes (256x148)
Server sends 10 x 1514 bytes. Client responds with an ACK and a Window size of 23296 bytes (256x91)
Server sends 15 x 1514 bytes. Client responds with an ACK and a Window size of 1280 bytes (5 x 256)
Server stops sending (I'm guessing because the client advertised Window size was less than a single packet's worth of bytes)
<0.1 seconds passes>
Client sends a "TCP Window Update" re-advertising a TCP window size of 65536 (256x256).
Server starts transmitting again
So the way I see this is that the App-V 5 client is controlling the transfer speed by utilising TCP Window flow control. The trace was taken at the client end so there's no room for anything on the network to be fiddling with flow
control (and we've confirmed there are no traffic shapers in the loop).
We've also tried streaming directly from the local client by copying some App-V 5 apps down to the client, creating a SMB share on the client and changing PackageSourceRoot to \\localhost\AppVContent (i.e. so we are streaming directly
from the client to the client - to remove the network from the equation) and there is only an improvement of 5 to 10 seconds. So we know it's nothing to do with the network or the servers.
We've tried turning off TCP auto-tuning on the client with:
netsh interface tcp set global autotuninglevel=disabled
and turning off TCP chimney offloading (which is off anyway because the NIC doesn't support it and Netstat -t output shows "InHost" for offload state for all connections) with:
netsh int tcp set global chimney=disabled
and nothing has improved.
So we've now focussed on the extraction of the .appv (ZIP) file on the client.
Using Windows Explorer it takes 75 seconds to extract the ZIP file
Using 7ZIP it takes 9 seconds to extract the ZIP file
Yeah we've always known that the Explorer ZIP engine is terrible. That's why we use 7ZIP or WinRAR on our clients.
So we've started to wonder if the problem with the slow App-V 5 streaming is because the client is downloading the .appv file and extracting it as it goes along in a single thread. If the App-V 5 client is using the same terrible
ZIP engine that Explorer does then that would explain the slow performance. The "download" appears to take a long time because the client is using TCP flow control to slow the transfer since it's extracting the .appv file using a very slow ZIP engine
and it's all in a single thread.Guys,
Just wanted to give you a brief update basically close this thread as Answered.
We had submitted 4 App-V 5 Bugs to Microsoft and these were reproducible and an explanation was given on work around to them. Microsoft
sent down a App-v developer to have a look at our problems. They said they will try and include the Bug fixes in SP2 which should be out in a few weeks or they will definitely be included in SP3.
In regards to the slow streaming it all came down to the Disk IO.
We found that you could simply enable "Turn off
Windows write-cache buffer flushing on the device", then start streaming the app and then disable "Turn
off Windows write-cache buffer flushing on the device" immediately after
(we don't want to leave it on) and that basically fixed the issue.
But a normal user would not have permissions to do
this, so a code was written to enable and disable this option.
Apology for not going in detail, like my opening thread, its very late.
but if you would like a detailed analysis please message me.
I would like to Thank the Talented Consultant who designed and implemented are App-V infrastructure who found the bugs and created all
the work around and who also emailed the detailed analysis of the problems to Microsoft that got them interested.
Simon Bond from Ultima Business Solutions.
Thank you -
OLEDB Requirements on the Client PC
I have developed many VB apps using ADO to interface with SQL Server 7 successfully but now am developing a VB app to use ADO (OLE DB) to Oracle 8.1.7 and have some questions?
1. Can I use the Provider in MDAC 2.6 provided by Microsoft to successfully Select From and Insert to a Table?
2. When connecting to SQL Server I would always pass Server as the Data Source along with the Database Name, User ID & Password. What would I pass to the connectiion string parms for Oracle. As I see it documented, the Data Source is to be the Oracle Database Name which leads me to my next question?
3. How does the OLEDB VB on the client locate the physical server where the database resides when I wouldn't be passing the server name for resolution? Is there something from Oracle that needs to be loaded on the Client PC where my VB app would run that would tie this alltogether?
Any help would be greatly appreciated...Thanks
Mike CannonIn order to connect to Oracle from a client machine (unless you're using JDBC and the thin driver), you'll first need to install the Oracle client on the client machine. There are some third-party ODBC drivers that don't require a client installation, but you'd have to license those separately.
You can use the providers that come with the MDAC, assuming you've already installed the Oracle client. Generally, though, I'd recommend going with the Oracle versions.
In order to tell the client how to connect to the database, you'll need to configure TNS (Transparent Network Substrate) on the client machine. Generally, this involves adding an entry to a text file on the client with the host name, port, service name, etc of the Oracle database. There are GUI's that simplify this task, as well as ways to have a central repository of host names (Oracle Names server, now Oracle Internet Directory).
Justin -
I have several friends and family who are looking for a central place to access information from ( Pictures, home movies etc ). So I am considering setting up an OSX Lion Server. There are some other things I can use it for as well.
Here is my question:
If I were to purchase the Apple Remote Desktop with Unlimited licenses, would I be able to install the client software on each of there computers/laptops and have them remote desktop into the server? Or would I have to install the Admin software on each? Do they intend it to be used strictly as one admin to access many clients?
I always could set up a network drive so they can log in and just see the folders they have created with space on the server I provide them. But I want them to be able to log an and actually use it as a Remote Desktop.
Thanks,
EricDave,
Thanks for the feedback. I understand that ARD is meant for Remote Administration, but I was not sure if it could be used for my purpose as well. The reason I was looking to do it this was was because I read several articles online about security and performance issues with setting up VNC and activating screen sharing. Unless I am misunderstood.
As far as people's activities on the server, mostly it is going to be used as a place for them to store their media. I will only allow own person ( Who I trust and I know wont botch the server ), to run applications. Everyone else will be restricted to uploading and downloading content to their designated account on the server as well as a community share on the server.
I appreciate your help.
Thanks,
Eric -
RMI call back - How to refer to the client project from the server project?
Hi, I am working on an RMI assignment which basically needs me to use the RMI call back for the server to notify the clients.
I have 2 projects , one for the client and another for the server.
In the client project, I have a client interface and the main client class implements this interface.
In the server project, I have a server interface and a class that implements this interface.
I can use the server interface in the client project's code by adding the server project in the path of the client project. it lets me use the server interface in the code if I put "import.." statement.
But the issue is I can not do the same to access the client interface from within the server project's code. Since that will be a circular reference, the compiler does not let me use the client interface from within the server's code. This is putting me in a great difficulty and I am stuck here. What should I do so that I can use the client interface and the compiler won't complain?
Thanks for any help..
Regards.. jsLet me explain what I tried: I manually generated stub class of the client using the Eclipse IDE as mentioned in my previous message. The StockMSClient_Stub.class got created in my client project.
The common project has the 2 interfaces - one from the client and one from the server.
I have added reference to the common project from the client and server projects to use the interfaces.
With the above mentioned in place, when I run the server project, the registry binding of the server objects is very fine. But I am getting error in the applet at the line where I am passing the client object to the method provided by the server interface. The following is the code snippet in the applet where I am getting the error.
specifically the line: String response = objs.login(userId, password, smsClient); ====================
public void login() {
Registry reg = null;
String userId = "test";
String password = "test";
this.smsClient = new StockMSClient();
try {
reg = LocateRegistry.getRegistry(rmiHost,rmiPort);
UserInterface obj = (UserInterface) reg.lookup(rmiStrings
[1]);
User u = obj.find(userId);
if (u == null) {
System.out.println("This user is not valid");
} else {
UnicastRemoteObject.exportObject(smsClient);
reg = LocateRegistry.getRegistry(rmiHost, rmiPort);
LoginLogoutInterface objs = (LoginLogoutInterface) reg
.lookup(rmiStrings[0]);
//getting error at the following line.
String response = objs.login(userId, password, smsClient);
System.out.println("response :" + response);
} catch (AccessException ae) {
System.out.println(ae);
} catch (NotBoundException nbe) {
System.out.println(nbe);
} catch (RemoteException re) {
System.out.println(re);
} //end login()====================
Error is:
java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
java.lang.ClassNotFoundException: sms.rmi.graphics.StockMSClient_Stub (no security manager: RMI class loader disabled)================
I don't know why this is happening..Please help.
thanks & regards, js
Message was edited by:
jsitaraman -
Providing Access based on Client IP Address
Current Scenario -
SAP Portal is accessible directly and via Citrix (VPN).
Based on the URL alias - we have implemented Desktop Filtering.
eg if the URL ends with / internet - You get restricted roles
eg if the URL ends with / intranet - You get wider roles
In Production, we also have Netscaler Reverse Proxy and HTTPs settings in place for External (outside firewall) access.
New Requirement (Example) -
Based on the IP address of the client, determine which subnet it falls under and based on that -
If used within Citrix - Provide certain roles
If not used within Citrix - Restricted access / Redirect to a different URL on the redirect server.
Questions -
With the current desktop filtering in place based on URL determination and no specific restriction for inside/outside Citrix access -
1 - Please suggest which would be a good way to crack this? Inside Portal (IP address determination and SAP Logon modification) / Outside Portal (eg Citrix, Network OS Exit, Reverse Proxy etc) based on Best Practise ?
2 - Not sure if this is relevant : Find IP address of Client with webdybpro (This API works only in Web Dynpro and not PDK) ? I believe tweaking SAP Logon logic can get very painful and overtly complicated for such scenarios.
Thanks for your inputs ~ DhanzVivek,
On the coding front -
1 - Will reading the IP address in the header field x-forwarded-for retrieve right results if reverse proxy is in place ? Wouldnt it retrieve the proxy / load balancer IP instead of Client IP ?
2 - Also we have HTTPS settings for extranet access - So encrypted data (eg Client IP ) is transferred that the Web Dispatcher cannot manipulate ?
Please suggest.
Remember to be polite
Edited by: Anja Engelhardt on Jan 27, 2012 11:27 AM -
Services in JCo RFC not getting started after Changing the client from 001
Hi SAP Stars,
I have recently Installed Quality and Production servers with PI 7.1 on windows 2003, Sqlserver 2005, when I'm doing Post Activities(http://host:port/nwa) in which I try to change the client from 001 to 300(newly created) in JCo RFC(4 services) and start the service it is throwing error when I again change it to 001 client and start the service it is getting started, Could anyone help me in solving this issue same issue I facing in PI 7.1 Quality and Production
Thanks In Advance
Anil KumarHi Anil,
All these JCo RFCs are client specific RFCs.
Please logon your PI NWA
Choose Configuration Management - Infrastructure- JCo RFC Provider
Then, Select the RFC
Under Details -> Choose Repository Configuraton
Change the client name to 300 (your new client)
Save
And repeat the same for all JCo RFC that you want to work for your newly created client.
Please ensure that you are using SAPJSF user & correct password for all these RFCs.
Ideally, these rfcs shuould work now if now please restart your PI (mostly Java alone also do)
I hope this helps you.
Regards
Sekhar
Edited by: sekhar on Dec 17, 2009 11:39 AM -
Mobile Sync not update the client or remote store after first sync
Subject: OracleLite 9i does not update the client or remote store during synchronization with a Windows CE device
After the first synchronization, neither the client or remote stores are updated on future synchronization when the publication is created with the fast refresh option. If the publication is created with the complete refresh option, the server will update the client, but the client cannot update the server after the first synchronization. That is once the database (.odb) file is downloaded from the server on the first connect, no updates to either the client, or server are performed for a publication created with the fast refresh option, and only the client store is updated when the publication is created with the complete refresh option. These result are obtained whether I use MSync via Microsoft Active Sync, or I use the Embedded VC++ program I wrote to initiate the synchronization from the Windows CE device.
I am 99% sure the JAVA code that I am programmatically creating the publications with, and the Embedded VC++ code for initiating the synchronization from the Windows CE device are correct. Both programs adhere exactly to the example code provided either in the documentation, or in the sample code shipped with OracleLite 9i Release 5.0.1. My conclusion is that there is a problem with Oracles replication programs either on the Windows CE, or Server side, or both. This conclusion on my part is strongly supported by the fact that MSync operating with Microsoft Active Sync behaves exactly the same as my code that initiates the replication from the Windows CE device. Also, by looking through the discussion forum, I gather that others are experiencing similar, if not identical, replication problems.
To support my contention that it is a Oracle problem, I have prepared a simplified version of the Embedded VC++ code to initiate the synchronization for the CE device, and the JAVA code for creating the publication. This code duplicates the problem and is easy to follow. You may download the zip file containing code via the link https://Yggdrasill.cfr.msstate.edu:4443/SyncProblem.htm or the link http://Yggdrasill.cfr.msstate.edu:7778/SyncProblem.htm. This zip contains the Embedded VC++ project files, that will compile and run correctly on a PocketPC with an Arm processor, or the PocketPC x86 emulator when you have the required include files, and libraries in the path. It also includes the JAVA code I used to create the publication. If you extend the VC++ code to run on additional platforms be sure to add the compile flag (directive) /D SQL_NOUNICODEMAP , and the library files olod2040.lib, and ocapi.lib in the library box from Project settings. On my system the paths to the Arm, and x86 libraries are C:\ORALITE501\MOBILE\SDK\WINCE\POCKET_PC\Arm\LIB, and C:\ORALITE501\MOBILE\SDK\WINCE\POCKET_PC\X86EM\LIB, respectively
I am using a NT 4.0 SP6a server with Database 9i Release 2 Enterprise edition, and OracleLite 9i Mobile Server Release 5.0.1. The Windows CE test device is an iPac running Pocket PC, connected to a system running Windows 2000 Professional SP2, and Microsoft Active Sync 3.1.
Please review this problem documentation, and tell me what I am doing wrong, or point me to a location where I can get a patch to fix the problem.
Thanks,
Thomas G.Matney
[email protected]
(662)325-2791Hi,
I'm also facing a similar problem. I'm using Mobile server as stand alone config with Oracle 8i as server database. After the first download, the data updated at the server is not getting downloaded to client(PDA).
How did u overcome this problem? Is there any work around?
I want to do synch using both serial and dial up.
Thanks in advance,
Sri -
(261705413) Q RPCC-7 Does the client.jar file tie you Weblogic Server?
Q<RPCC-7> BEA is providing client-side helpers in the client.jar file, including
parsing and SOAP facilities, etc. But, are we saying that there is nothing
in there that ties the client to the server-side WLS implemenation? It seems
that putting the interface of the underlying implementation EJB SLS bean is a
coupling...??? It also seems that by coupling the client to WebLogic classes
(weblogic.soap.WebServiceProxy|SoapMethod) we are coupling it to WLS.
A<RPCC-7>: I understand your concerns, but you are not tied to WLS that tightly.
Certainly, the static client code utilizes the EJB interface that underlies the
web service but it is possible to invoke the web service dynamically. The use
of weblogic library classes to invoke the web service just indicates the use of
weblogic's client API. This client API can also be used to invoked webservices
hosted on other application server or frameworks. Additionally, other client APIs
can be used to invoke this web service, for instance the VB client example that
ended Thursday's presentation. Lastly, the remote interface in the client.jar
file could actually just be a java presentation generated from a WSDL file that
represents a C# web service (this is actually only possible in WLS7.0 and not
6.1 but the point is you do not actually know the inderlying framework or implementation
andnor should you care).
Adamcheck the server log;
/app/oracle/product/fwm11g/user_projects/domains/fwm_domain/servers/AdminServer/logs/AdminServer.log
you can launch the console and see if it is running; http://<server>:<port>/console -
Different signed jars need to be passed to the client.
Hi,
My requirement is that I have a list of my jar files that are signed by me and a set of another jar files that are not signed by me, but a third party. I require that these be signed by the third party only. I need to pass this files on to the client.
I cannot put the jars with different signatures under the same jnlp.
I am trying to embed one jnlp (the one that has third party signed jars) inside the main jnlp (the jnlp that will be called from my html). But I am not able to do so,
Please provide any help. Also is there any other approach that can be used.
Thaks in advance.tcstcs,
One thing you could do is manually go in and delete the 3rd party's signature from the second JAR file, and re-sign that jar with your own signature. I'm not 100% sure this is what you should be doing, but you could give it a shot. Open up the 3rd party JAR in WinZip and delete the meta-inf path. This contains the signature. Now you can re-sign that jar with your own signature, and they will all match up so you can use them in the same JNLP file. Hope this helps,
Mark -
How to enable downloading of an Attached File at the Client End
Hi
In the process of enabling File Attachment in my Email Service (using Servlets), I have been able to upload the file chosen for attachment.
Now I am facing the following 3 problems :-
1. How to enable the client to download his file from his broser ?
2. How to provide features of uploading multiple files, as till now i have been able to upload only a single fiel ?
3. I don't want the files to be uploaded as soon as i press upload. Instead I want all files to be collected in a list box and then be uploaded together when i press Attach.
If anybody has any information, then please send that ASAP.
thanxgo there
http://forum.java.sun.com/thread.jsp?forum=45&thread=155600 -
Changed IP address, how do I update the clients
I've poked around but all I can find is info about how to change the IP address of a TC without additional information about what to do with existing clients.
I'm not using a TC in this case (NAS frontended by a Mini providing AFP accesss), but I figured this would be the best place to ask.
I set up TimeMachine on most of our Macs (all 10.7 and 10.8) a few weeks ago, but just had to reconfigure my network which neccesitated changing the IP address of the host that provides the TM remote disks.
How do I tell the clients to start using the new address of the server? Will just adding a new disk do the right thing (I haven't tried as I don't want it to clobber what already exists).
Thanks.Yes, you have to change the setup in each computer to redirect it to the new location of the backup disk..
You can do a TM reset.. but that should not actually be necessary.
See A4 here. http://pondini.org/TM/Troubleshooting.html
But TM is smart enough that when it finds the disk.. it will then find its previous backups and continue the backup .. after suitable verification. You can change the computer name. Change the disk name. Change the backup sparsebundle name.. TM will still find it and continue to use it. And even if there are multiple sparsebundles or disks with the same name or even computers with the same name.. which would break network rules,, but TM still won't get confused.
Again read up a bit of how TM works its magic.
http://pondini.org/TM/Works.html
The UUID is picked up from source hard disk I guess.. and that is what is used. This ensures everything is kept separate from names or even IP address.
Maybe you are looking for
-
Problem occuring while uploading the template therough BAPI
Hi, I'm uploading inspection plans template through BAPI. While uploading its giving a error message like invalid file type. I'm using Excel sheet. I tried through Text format also. Same error message i'm getting. Can anybody help me. Regards, Narend
-
My laptop has collapsed and I need to access my thunderbird account from my PC - Help!
Really need some advice. I've spilled liquid on my mac and I won't be replacing it anytime soon. Can I access my account from my G5? I would appreciate help if anyone knows how to do this.
-
Open item clearing in closing period - doubled amounts
hello, My customer has a following issue: Druing document clearing in closing period amounts are doubled. Is it possible to avoid this? Thanks in advance. Best Regrads, Slavisa
-
How to load swf into a movie clip?
i have an swf file i want to load into a movie clip within my flash file, i think im supposed to use loadmovie () instead of loadmovienum, can anyone help me out? thanks
-
Update SWC dependencies in Enterprise Repository 7.1
Hi All, We are running PI 7.1. I have updated the swc dependency in the SLD for an existing swc. How do I update the SWC in PI 7.1 Enterprise Repository so that the dependency is active? I know in previous versions, we just re-imported the swc but