Mobile Sync not update the client or remote store  after first sync

Subject: OracleLite 9i does not update the client or remote store during synchronization with a Windows CE device
After the first synchronization, neither the client or remote stores are updated on future synchronization when the publication is created with the fast refresh option. If the publication is created with the complete refresh option, the server will update the client, but the client cannot update the server after the first synchronization. That is once the database (.odb) file is downloaded from the server on the first connect, no updates to either the client, or server are performed for a publication created with the fast refresh option, and only the client store is updated when the publication is created with the complete refresh option. These result are obtained whether I use MSync via Microsoft Active Sync, or I use the Embedded VC++ program I wrote to initiate the synchronization from the Windows CE device.
I am 99% sure the JAVA code that I am programmatically creating the publications with, and the Embedded VC++ code for initiating the synchronization from the Windows CE device are correct. Both programs adhere exactly to the example code provided either in the documentation, or in the sample code shipped with OracleLite 9i Release 5.0.1. My conclusion is that there is a problem with Oracles replication programs either on the Windows CE, or Server side, or both. This conclusion on my part is strongly supported by the fact that MSync operating with Microsoft Active Sync behaves exactly the same as my code that initiates the replication from the Windows CE device. Also, by looking through the discussion forum, I gather that others are experiencing similar, if not identical, replication problems.
To support my contention that it is a Oracle problem, I have prepared a simplified version of the Embedded VC++ code to initiate the synchronization for the CE device, and the JAVA code for creating the publication. This code duplicates the problem and is easy to follow. You may download the zip file containing code via the link https://Yggdrasill.cfr.msstate.edu:4443/SyncProblem.htm or the link http://Yggdrasill.cfr.msstate.edu:7778/SyncProblem.htm. This zip contains the Embedded VC++ project files, that will compile and run correctly on a PocketPC with an Arm processor, or the PocketPC x86 emulator when you have the required include files, and libraries in the path. It also includes the JAVA code I used to create the publication. If you extend the VC++ code to run on additional platforms be sure to add the compile flag (directive) /D SQL_NOUNICODEMAP , and the library files olod2040.lib, and ocapi.lib in the library box from Project settings. On my system the paths to the Arm, and x86 libraries are C:\ORALITE501\MOBILE\SDK\WINCE\POCKET_PC\Arm\LIB, and C:\ORALITE501\MOBILE\SDK\WINCE\POCKET_PC\X86EM\LIB, respectively
I am using a NT 4.0 SP6a server with Database 9i Release 2 Enterprise edition, and OracleLite 9i Mobile Server Release 5.0.1. The Windows CE test device is an iPac running Pocket PC, connected to a system running Windows 2000 Professional SP2, and Microsoft Active Sync 3.1.
Please review this problem documentation, and tell me what I am doing wrong, or point me to a location where I can get a patch to fix the problem.
Thanks,     
Thomas G.Matney
[email protected]
(662)325-2791

Hi,
I'm also facing a similar problem. I'm using Mobile server as stand alone config with Oracle 8i as server database. After the first download, the data updated at the server is not getting downloaded to client(PDA).
How did u overcome this problem? Is there any work around?
I want to do synch using both serial and dial up.
Thanks in advance,
Sri

Similar Messages

  • Windows could not update the computer's boot configuration Server 2012

    I'm trying to install Windows Server 2012 on another partition (V:) that I create directly from Disk Management. After I create it, I do a simple format of the partition.
    Next, I try to Install Windows Server 2012, directly on the recent partition, after the setup is completed, Windows Server 2012 boots to the Getting the devices
    ready section, but stops and throws me this error.
    Windows could not update the computer's boot configuration
    After that the computer, restarts and it goes on and on unable to create a multi-boot environment. What's killing me is that I have done this on the past like 10 times and never run to this problem.
    I'm running Windows 7 Home Premium on an ASUS K45 64 bit.

    Hi,
    You can try adding a new boot entry by using bcdedit tool:
    Adding Boot Entries
    http://msdn.microsoft.com/en-in/library/windows/hardware/ff541231(v=vs.85).aspx
    Or you can build a usb-bootable deivce to install the image:
    Walkthrough: Create a Bootable Windows PE RAM Disk on a USB Flash Disk
    http://technet.microsoft.com/en-us/library/dd744530(v=ws.10).aspx
    Hope this helps.

  • PC Sync could not update the data to the mobile ph...

    Ok now I am a little annoyed with my Nokia 6680.
    For the last four months it has been working fine but all of a sudden it has stopped synching with either of my PC's.
    The phone connects ok and I can do file transfers etc however when I try to sync it fails with the message
    "The Synchronisation has been Terminated!"
    and
    "PC Sync could not update the data to the mobile phone."
    I updated PC Sync to latest version on both PC's and I have tried cable and bluetooth connections but get the same issue.
    In the end I bit the bullet and re-initialised the phone and it began working again.... for three days and then its doing the same thing again. It still connects ok but no sync.
    My Laptop is using WinXP SP2 and my home PC is on WinXP SP1.
    Anyone able to help with this please, my phone is effectively now a paper weight and I will go back to Pocket PC phones again.

    Thanks for the tip I had the SAME problem on the 6822 same error. The phone had been fine for a month or so. Then nothing would synch, thought it was the PC fixed / reinstalled the software changes options nothing would work same error.
    Read your note, powered down the phone and Bingo all synched fine!
    Thanks very much. I'm using a Nokia 6822

  • Response payload is not updating the SAP tables in Sync Interface

    Dear Experts,
    We are doing the ECC to SFDC sync interface by using the ABAP Proxy to Webservice ICO scenario (SOAP to SOAP).
    The response payload from SFA has having the SOAP envelope, to remove this I have used the Java mapping with this we resolve the normal graphical mapping issue and ECC is able to get the response at MONI level.
    But the response payload is not updating the ECC SE11 tables at the proxy level.
    I have attached ECC synchronous proxy testing results with response payloads. With this original response payload the proxy is not updating the tables.
    Please help me out.
    Regards
    RK

    Hi RK,
    Set run-time parameter( LOGGING_SYNC) to 1 in Integration Engine (SXMB_ADM --> Integration Engine Configuration -> Edit configuration ) . LOGGING_SYNC may have set to 0 in IE. If LOGGING_SYNC is set to 0 , IE will not save or write the messages .
    Note: If PI system is Java only stack , please perform above step in ECC.
    Thanks
    Hari.

  • Syncing my iPad with my iMac will not update the apps software

    Whenever I sync my iPad Air 2 to my iMac the updated apps on the iMac will not update the apps in the iPad. I have rebooted the iMac and iPad, tried different cords, and checked all settings. All other things in the iPad sync properly.

    Are you using iTunes Match by chance?  I had no problems whatsoever with play counts synching between any of my devices until I started using iTunes Match.  I turned it off and magically my play counts synced.  Once. Hasn't happened again though. 

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

       I got error  "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I  found out the cause is  Update Item action       
    I need to update item in another List call Customer Report ,the field call "Issues"  with data type  "Choice"   to yes
    then the error arise .   please help..

    Thanks for the quick response Nikhil.
    Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
    Site Lists
    Engagements = 4456 (Errors on this list, primary list for activity)
    Tasks = 7711  (All workflow tasks from all site lists)
    Clients = 4396  (Lookup from Engagements, Tslips, etc)
    Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
    Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
    A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
    Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

  • Automatic Row Processing (DML) process is not updating the record

    Hi all,
    I have an application which was working fine last week and tested and backuped to new application. This Monday, one of the form in that application is not updating the data all of a sudden. I debug that by having page 0 variable and assign the value from the column variable to page 0 variable. Whatever value I changed to the column variable was getting updated to page 0 variable. But it is not updated in the database. So, I changed the success message of the "Automatic Row Processing (DML) process" and I can see the success message on the page, but the column value does not get updated. But when I go back and checked my backup application, that page is working fine. For now, I copy that from the backup application, but I would like to know why this is happening?
    Thanks
    SHY

    Hi Scott,
    Thank you very much for your response. Because of the database complexity, I can't create/import the application on the apex.oracle.com. I am just wondering why this is happening. One of my coworker said same thing happened to her in one of her project and it gets resolved once she restart the server. I am not able to restart the server to check and see if this resolved as the application is on the client server. Do we need to clean up any log file? Thanks.
    SHY

  • My 160 classic wil not update the firmware 1.0.1  ?

    hi al my 160 classic wil not update the firmware 1.0.1 what do do rong also after sync not al my covers ar on my ipod

    Hi hrcpinfreak,
    What exactly happens when you try updating your iPod's firmware? If you're getting an error message while syncing your iPod, then please quote what that precisely says.
    You could try these five iPod steps, as a start:
    The Five Rs
    But we won't really be able to give you specific instructions unless we know some more details, so please let me know what's going on!
    -Kylene

  • MR 11 not updating the invoicing for services

    Hi All,
    I have a scenario where the client uses MR11 for clearing the invoices.
    He does not use MIRO for invoicing.
    During our observation it is found that using MR11 does not update the invoices for services but the invoices for the material received is updated while checking the reports like ME2N.
    I have checked the Service based IV and the GR based IV in the  invoice tab of PO.
    Can you please advice me as to why this is happening only in case of services.
    Thanks and Regards
    Sridhar.

    Hi Charlie,
    Thank you very much for the response.
    Actually I am looking for the IR reduction and not the GR reduction.
    The note you have mentioned applies for GR reduction.
    Also we are in the ECC 6 environment.
    Please update me with further information.
    Regards
    Sridhar

  • Updateing CustomXML scheema from sharepoint 2010 in VBA does not update the DIP (Document information panel)

    I need to update a schema from Sharepoint with namespace
    http://schenas.microsoft.com/office/2006/metada/contentType when i am opening a Word document. I am using VBA to do so. When i have made the Changes it does not update the DIP, not until i save the document.
    Is there a way to update the dip using VBA.
    /Ola
    olha

    Hi,
    This is the forum to discuss questions and feedback for Microsoft Office client. For any VBA related issues, I would suggest you to post in related MSDN forum -
    Microsoft Office for Developers, to get better support experience:
    https://social.msdn.microsoft.com/Forums/office/en-US/home?category=officedev
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Why my ipad can not update the ios7.1.1

    why my ipad can not update the ios 7.1.1

    Hello there, crivera350.
    The following Knowledge Base article offers up some great steps for if you are unable to update your iOS device:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Recovery mode erases your device and restores it, which should resolve the issue. If you previously synced with iTunes or iCloud, you may be able to restore from your backup after recovery.
    Turn off your device. If you can't turn it off, press and hold the Sleep/Wake and Home buttons at the same time and wait a few seconds for it to turn off.
    Plug the device's USB cable into your computer only.
    Hold down the device's Home button as you connect the USB cable to it.
    When you see the Connect to iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 one more time.
    iTunes should open and display a message such as: "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
    Use iTunes to restore your device.
    If you don't see your device in iTunes, follow these steps for Mac or these for Windows.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

    Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
    working fine and no changes were made to the workflow.
    I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
    to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
    are), but we still cannot figure out why the workflow is still throwing this error.
    We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
    The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type. 
    The form associated with the list was modified in InfoPath 2010. 
    Approvers would provide their approval in the InfoPath form which is then read by the workflow.
    Side note - items created after the workflow throws this Unknown Error some seem to be working fine. 
    We have deleted the item in question and re-added it with no effect. 
    Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
    Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
    Cheers

    Hi,
    I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
    If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

  • Not Updating the Values in the JComboBox and JTable

    Hi Friends
    In my program i hava Two JComboBox and One JTable. I Update the ComboBox with different field on A Table. and then Display a list of record in the JTable.
    It is Displaying the Values in the Begining But when i try to Select the Next Item in the ComboBox it is not Updating the Records Eeither to JComboBox or JTable.
    MY CODE is this
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    import javax.swing.DefaultComboBoxModel.*;
    import javax.swing.table.*;
    import java.sql.*;
    import java.util.*;
    public class SearchBook extends JDialog implements ActionListener
         private JComboBox comboCategory,comboAuthor;
         private JSplitPane splitpane;
         private JTable table;
         private JToolBar toolBar;
         private JButton btnclose, btncancel;
         private JPanel panel1,panel2,panel3,panel4;
         private JLabel lblCategory,lblAuthor;
         private Container c;
         //DefaultTableModel model;
         Statement st;
         ResultSet rs;
         Vector v = new Vector();
         public SearchBook (Connection con)
              // Property for JDialog
              setTitle("Search Books");
              setLocation(40,110);
              setModal(true);
              setSize(750,450);
              // Creating ToolBar Button
              btnclose = new JButton(new ImageIcon("Images/export.gif"));
              btnclose.addActionListener(this);
              // Creating Tool Bar
              toolBar = new JToolBar();
              toolBar.add(btnclose);
              try
                   st=con.createStatement();
                   rs =st.executeQuery("SELECT BCat from Books Group By Books.BCat");
                   while(rs.next())
                        v.add(rs.getString(1));
              catch(SQLException ex)
                   System.out.println("Error");
              panel1= new JPanel();
              panel1.setLayout(new GridBagLayout());
              GridBagConstraints c = new GridBagConstraints();
              c.fill = GridBagConstraints.HORIZONTAL;
              lblCategory = new JLabel("Category:");
              lblCategory.setHorizontalAlignment (JTextField.CENTER);
              c.gridx=2;
              c.gridy=2;
              panel1.add(lblCategory,c);
              comboCategory = new JComboBox(v);
              comboCategory.addActionListener(this);
              c.ipadx=20;
              c.gridx=3;
              c.gridwidth=1;
              c.gridy=2;
              panel1.add(comboCategory,c);
              lblAuthor = new JLabel("Author/Publisher:");
              c.gridwidth=2;
              c.gridx=1;
              c.gridy=4;
              panel1.add(lblAuthor,c);
              lblAuthor.setHorizontalAlignment (JTextField.LEFT);
              comboAuthor = new JComboBox();
              comboAuthor.addActionListener(this);
              c.insets= new Insets(20,0,0,0);
              c.ipadx=20;
              c.gridx=3;
              c.gridy=4;
              panel1.add(comboAuthor,c);
              comboAuthor.setBounds (125, 165, 175, 25);
              table = new JTable();
              JScrollPane scrollpane = new JScrollPane(table);
              //panel2 = new JPanel();
              //panel2.add(scrollpane);
              splitpane = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT,panel1,scrollpane);
              splitpane.setDividerSize(15);
              splitpane.setDividerLocation(190);
              getContentPane().add(toolBar,BorderLayout.NORTH);
              getContentPane().add(splitpane);
         public void actionPerformed(ActionEvent ae)
              Object obj= ae.getSource();
              if(obj==comboCategory)
                   String selecteditem = (String)comboCategory.getSelectedItem();
                   displayAuthor(selecteditem);
                   System.out.println("Selected Item"+selecteditem);
              else if(obj==btnclose)
                   setDefaultCloseOperation(JDialog.DISPOSE_ON_CLOSE);
              else if(obj==comboAuthor)
                   String selecteditem1 = (String)comboAuthor.getSelectedItem();
                   displayavailablity(selecteditem1);
                   //System.out.println("Selected Item"+selecteditem1);
                   System.out.println("Selected Author"+selecteditem1);
         private void displayAuthor(String selecteditem)
              try
              {     Vector data = new Vector();
                   rs= st.executeQuery("SELECT BAuthorandPublisher FROM Books where BCat='" + selecteditem + "' Group By Books.BAuthorandPublisher");
                   System.out.println("Executing");
                   while(rs.next())
                        data.add(rs.getString(1));
                   //((DefaultComboBoxModel)comboAuthor.getModel()).setVectorData(data);
                   comboAuthor.setModel(new DefaultComboBoxModel(data));
              catch(SQLException ex)
                   System.out.println("ERROR");
         private void displayavailablity(String selecteditem1)
                   try
                        Vector columnNames = new Vector();
                        Vector data1 = new Vector();
                        rs= st.executeQuery("SELECT * FROM Books where BAuthorandPublisher='" + selecteditem1 +"'");     
                        ResultSetMetaData md= rs.getMetaData();
                        int columns =md.getColumnCount();
                        String booktblheading[]={"Book ID","Book NAME","BOOK AUTHOR/PUBLISHER","REFRENCE","CATEGORY"};
                        for(int i=1; i<= booktblheading.length;i++)
                             columnNames.addElement(booktblheading[i-1]);
                        while(rs.next())
                             Vector row = new Vector(columns);
                             for(int i=1;i<=columns;i++)
                                  row.addElement(rs.getObject(i));
                             data1.addElement(row);
                             //System.out.println("data is:"+data);
                        ((DefaultTableModel)table.getModel()).setDataVector(data1,columnNames);
                        //DefaultTableModel model = new DefaultTableModel(data1,columnNames);
                        //table.setModel(model);
                        rs.close();
                        st.close();
                   catch(SQLException ex)
    }Please check my code and give me some Better Solution
    Thank you

    You already have a posting on this topic:
    http://forum.java.sun.com/thread.jspa?threadID=5143235

  • Work order should not update the fields in PR

    Hi  Gurus
    My requirements is that workorder should not updates the purchasing data fields in PR  do not go to the shoping cart. How can make it possible.
    Thanks in Advance

    Hi,
          I am not sure of your requirement clearly but check up the below user exits :-
    COZF0001 Change purchase req. for externally processed operation
    COZF0002 Change purchase req. for externally procured component
    or BADI :- IWO1_PREQ_BADI BAdI for Manipulation of P.Reqs from Orders + Networks ,SE18
    regrds
    pushpa

  • Login settings will not update the local testing server files

    When uploading to web server from local testing server, changing login settings in the control panel does not update the local testing server Restrict Access to page files. Causing login on website not to function.
    It does however update the Connections file and the login wizard form.
    What is the best way to change login settings before uploading site to web server?
    Thanks
    Dan

    Dan - I am having the same exact problem. I'm using the restrict access and user registration and login - when attempting to use the Update Record wizard to allow users to change their password or email address, it doesn't change the record.

Maybe you are looking for