Provide me solution for STRUTS and MySQL connection

Hi,
friends.
I am developing application in which i using mySQL database 5
and using struts.
I follow steps searched through google but i could not established
database connection
kindly step by step instruct me to connect with Database using struts
if possible give me sample application to
[email protected]
Thanks.

but i could not established database connectionPlease be specific. How did you conclude that? Which exceptions are you getting? Show the full message and the trace. They are not to be ignored :)

Similar Messages

  • Possible solution for -8 and other connection errors

    I've been struggling recently to make connections with people, often seeing the -8 error. This happened even with the most simple network setup we could find, with our routers either running with uPnP enabled or disabled, and ports forwarded or not. Often we could connect individually to the Apple test accounts, but not each other.
    The fix that worked for me, and also for someone else on these boards, was to look at our network "ports" on the Macs themselves. Not the TCP/UDP ports, but the "ethernet" , "airport", etc.
    If you open system preferences, Network, and from the Show: dropdown at the top choose "Network Port Configuration" you will see the hardware network ports on your machine. If you use your machine in multiple environments, such as with a wired Ethernet port, Airport, perhaps a Firewire network too, your Mac may have several IP addresses assigned to itself, even if only one is active. Installing virtualization software such as Parallels adds more ports here, with more IP numbers.
    Whilst running iChat in debug mode, and watching outbound connections through Little Snitch, I saw that firstly iChat thought I had multiple IP addresses which it attempted to open uPnP with, and secondly my outbound packets had the private internal IP address of one of the Parallels network ports the person I was trying to communicate with - which would never be delivered.
    What we did was disable all the ports in the System Preferences described above, except for the one in use. We then restarted iChat and our video streams opened! I believe that iChat simply gets confused about which IP address to do its uPnP mojo with, and disabling the ones not in use makes it choose the correct one.
    If you follow this advice, remember to re-enable the ports you disable when you use want to use them in future.
    I'm convinced this is the cause of the problem - even when I use my MacBook behind a commercial locked down Watchguard firewall the video conferencing still works, which suggests that it's not the opening of ports through the firewall that's the issue, at least for some people.
    I hope this is useful information for people struggling with -8 errors - let me know how you get on.

    Intel macs, since 25 febr.
    "watching outbound connections through Little
    Snitch"
    Interrupted connections under some circumstances
    after applying the AirPort Extreme 2007-001 update:
    This is (often) soluble by disabling any third-party
    wireless signal monitoring or sniffing utilities.
    I don't think Little Snitch was causing any problems, for me at least. It did let me see that it was trying to talk to the other machine's non-active IP address, which is what led me to turning off the other network ports.
    It's quite informative to see which TCP and UDP ports are being actively used, and where they're going.

  • CS6, FTP and MySQL Connection ERRORs

    Adobe CS6 Dreamweaver
    I have the latest + updates of CS6 for Mac OS X 10.7.4.latest
    I can FTP, but files are not readable after the upload, on any web hosting provider.
    I have to use a thrid party FTP application (CyberDuck or Trnsmit) to make this happen.
    NOT HAPPY about this £2500 CS6 Master Collection spend not working !!!!
    When I try to connect via MySQL I get this error and failed actions:
    https://dl.dropbox.com/u/5485939/adobe_CS6_dreamweaver_FTP_MySQL/Screen%20Shot%202012-07-1 3%20at%2011.11.57.png
    https://dl.dropbox.com/u/5485939/adobe_CS6_dreamweaver_FTP_MySQL/Screen%20Shot%202012-07-1 3%20at%2011.11.45.png
    https://dl.dropbox.com/u/5485939/adobe_CS6_dreamweaver_FTP_MySQL/Screen%20Shot%202012-07-1 3%20at%2011.11.19.png
    I have checked the folders & content for ...
    _mmServerScripts
    Connections
    are uploaded properly (having to use a third party FTP application, see above).
    I have the correct logins details for FTP and MySQL, as other MySQL Apps (Sequel Pro) have no problem connecting to any web hosting proivdier for MySQL using the exact same login details.
    This is the same on my iMac or my MacBook Pro.

    Hello David, I am having this issue getting errors while trying to get my SQL to connect with the server. I clicked on the link you provided and I get a "you do not have permission to view this" message. Can you please share what ever solution that adobe has with me too.
    I am really really irritated with this issue, as someone else stated this is really inconvenient when I want to get some work done. I am also upset that I bought this software, especially if I cant find a solution.

  • JSP and MySql Connectivity in Fedora core 4

    Dear all,
    We are developing software using JSP and MySql on Fedora Core 4 platform and are unable to find the connectivity for JSP and MySql. Can anybody help....

    Dear all,
    We are developing software using JSP and MySql on Fedora Core 4 platform and are unable to find the connectivity for JSP and MySql. Can anybody help....

  • Login screen in struts and mysql database

    This coding is used for only jsp page like login screen. Now i want to use this coding in struts and mysql. will u please help how can i use this coding in struts. please help me
    Index.jsp
    Admin : <input type="text" name="admin_name" size="22" value="">
    Password : <input type="password" name="admin_password" size="22">
    <input value="Login" name="login" type="submit" value="Login">
    <input value="Cancel" name="login" type="submit" value="Cancel">
    admincheck.jsp
    try
    Class.forName("com.mysql.jdbc.Driver").newInstance();
    conn = DriverManager.getConnection
    ("Jdbc:mysql://localhost:3306/domaininform","root","");
    String admnName = request.getParameter("admin_name") ; // Get
    the User Name
    String admnPwd = request.getParameter("admin_password") ;
    statement = conn.createStatement();
    String Query = ("select * from admin " ) ;
    rs = statement.executeQuery(Query);
    while(rs.next())
    admn = rs.getString(1);
    pwd = rs.getString(2);
    if( (admnName.equals(admn)) && (admnPwd.equals(pwd)))
    { %>
    <jsp:forward page="selectTable.jsp?butType=normal"/>
    <% } %>
    <% if( (admnName != admn) && (admnPwd !=pwd ))
    {   %>
    <jsp:forward page="index.jsp">
    <jsp:param name="errMsg"
    value="Sorry Your UserName and Password is Mismatch" />
    </jsp:forward>
    <% } %>

    i know struts. but i don't know exactly send the
    textbox values in form page, action page and
    database. if u give coding like this i can easily
    manage. please help me.Read up on form beans, action classes and how they are associated in struts configuration files. You database level code (usually DAOs) can be called from action classes unless your architecture chooses to have some other layers.
    x

  • Annoture - Metadata Bridging Solution for Aperture and iView

    Aperture and iView users:
    I just released Annoture, a metadata bridging solution for Aperture and iView MediaPro! With Annoture, you’re just a click away from sharing metadata between these two popular image management and cataloguing applications. Spend more time working with your decisive moments than worrying about double-entry and incomplete metadata!
    Annoture lets you transfer annotations from iView MediaPro catalogs to Aperture projects and albums and back. This two-way transfer of IPTC and metadata information means you are not tied to any one application for your image management and workflow needs. Annoture also features a modular interface that can be extended to support additional applications in the future.
    http://www.tow.com/software/annoture/
    Users of Aperture and iView can download a fully-functional version of Annoture. The unregistered version will occasionally display a reminder to register, and all images processed in Aperture by Annoture will have a custom “Annotated with Annoture!” tag added. You can remove these items with the full version after purchasing and entering your license code.
    Enjoy!
    -adam

    Congratulations on getting this working and available so quickly! I bet many late nights went into this
    It's definitely providing some motivation for me to learn more Applescript...

  • Unbelievable no solution for FMS3 and FLVPlayback???

    I've spent the past 2 days scouring Google and dozens (easily over 100) websites
    trying to find an answer to something that people do every day!
    I am absolutely shocked that this info is not available anywhere online.
    A simple FMS3 and AS3 and RTMP and FLVPlayback example....
    totaly not simple and not possible to find!!
    I try every possible combination:
    import fl.video.*;
    VideoPlayer.iNCManagerClass = fl.video.NCManagerNative;
    myVideo.autoPlay = true;
    myVideo.isLive = true;
    myVideo.isLive = false;
    myVideo.source = "rtmp://localhost/appName/videos/flvName.flv";
    myVideo.source = "rtmp://localhost/appName/streams/flvName.flv";
    myVideo.source = "rtmp://localhost/appName/streams/videos/flvName.flv";
    myVideo.source = "rtmp://localhost/appName/flvName.flv";
    none is working!!
    i did not find any working simple solution for:
    FMS3 and AS3 and RTMP and FLVPlayback
    anywere on the web
    only for:
    FMS3 and AS3 and RTMP and Video and NetStream
    if someone could bring "salvation" to this required important issue
    i will be so thankfull
    cheinan

    Janaki L thanks a lot for your replay
    i think i know where the problam come from
    its from point number 8 in your raplay:
    8. Make sure you have a publisher connected to your 'server' using the 'appname'
    and streaming a live stream with the name 'streamname'
    I thought i do not need a publisher to be connected to my appname in my server.
    i thought FLVPlayback is doing the netConnection and start streaming the flv
    that are already published and sitting on the server.
    Is it not possible for the user that use swf with the FLVPlayback to make a netConnection
    by ac3 code or some other wey and the FLVPlayback will use that connection to play the flv for that user
    without third party connected publisher?
    If not - maybe i can use HTTP to let the FLVPlayback play the flv for the user
    but that bring me to other problem:
    my localhost is at:
    C:\inetpub\wwwroot\
    the flv is at:
    C:\Program Files (x86)\Adobe\Flash Media Server 3.5\applications\appName\streams\videos\flvName.flv
    what will be the http url for the flv?

  • Are there any solutions for Apple Studio display connectivity to a new Air?

    Are there any solutions for Apple Studio display connectivity to a new Air?

    Again.. I have an Apple Studio Display (17", LCD)
    and want to run it on a new MacBook Air.
    Specifications at:
    http://support.apple.com/kb/SP110
    Any solutions or advise?

  • Seeking solution for css and js making client very heavy around  800KB

    I have developed GUI using web dynpro,
    deployed the application in enterprise portal,
    when i save the web page in local machine from browser(IE),
    the HTML + css+ js file size comes around 700-800KB.
    How can i reduce this so that i can use it in internet.
    For internet application noone can afford more than 40 KB in client, Please any solution to the above problem ASAP

    Dear jian
    The css and js are around 500 KB.
    These files get downloaded only when the request is for the first time.
    So first time hit will be time taking but from the next time it will be fast.
    If u can check and tell the file sizes of css and js of your application, then i can compare with mine.
    But generally web applications should be very light in size.so , should i go for struts and can u give me the
    advantages and disadvantages of web dynpro against struts.
    Web dynpro pages are rendered in client browser ? and which framework does it follow ? is it ajax or ?????

  • I wonder to know what is the enterprise solution for windows and application event log management and analyzer

    Hi
    I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
    I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
    I Want to know the point of view of Microsoft expert and give me their experience and solutions.
    thanks in advance.

    Consider MS System Center 2012.
    Rgds

  • PHP and MySQL Connection problem

    I am trying to make a PHP MySQL on a remote server connection in Dreamwesaver CS3.
    When I enter the information (host, user, password, etc.) and hit TEST, I get the following error message.
    "Access Denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured."
    I know the user, password, etc. work, as I can access the MySQL database with other software.
    I checked with my host and they say there are no permission problems on their end.
    I have checked the settings on the Test Server page in Site Setup and everything looks correct and works there.
    I have not seen this particular problem described in other forum postings (although there are a LOT of postings on this topic!).
    Any help would be appreciated.

    I thought my testing server was the remote server and is always on as far as I know. I don't know how to turn it on or off.
    Is there some other testing server that I should be aware of?
    Frank
    Date: Wed, 3 Jun 2009 15:43:02 -0600
    From: [email protected]
    To: [email protected]
    Subject: PHP and MySQL Connection problem
    I know you are using remote, but is your testing server on? if not turn that on and see if that does it. it just happened to me working on remote server and could not get mysql conn to work, until I turn on my testing (developer server), then I was able to connect to mysql and the tables that I created in phpmyadmin remotly was downloaded.
    >

  • How can I Create a Client Configuration File for RemoteApp and Desktop Connection with Server 2012?

    I have a working RDS RemoteApp site and looking to test out the feature in Windows 7 Control Panel\All Control Panel Items\RemoteApp and Desktop Connections
    I came across this link: Create a Client Configuration File for RemoteApp and Desktop Connection and I believe this is what I need to do first, but these instructions are for
    Server 2008, and I'm running 2012.
    Any suggestions or tips on how I can begin testing this with Server 2012?

    Hi,
    You can manually enter the path to the 2012 feed and it will connect and download the RemoteApps and Desktop connections.
    If you need a sample .wcx file I have posted one here a couple of times.  If you want I will look for it and post a link.
    -TP
    I tried adding my URL's below, these are sample links that work for me right now for when I log into the web page, but neither of these work.  And I'm not sure what I would need to do with or how to create a .wcx file.
    When I type in my URL of: https://connect.mydomain.org/RDWeb, I get redirected to: 
    https://connect.mydomain.org/RDWeb/Pages/en-US/login.aspx?ReturnUrl=/RDWeb/Pages/en-US/Default.aspx

  • -1007f cannot get the Mac book air to reinstall, no drive. For disk and no connection

    -1007f cannot get the Mac book air to reinstall, no drive. For disk and no connection please help!!

    You can download the product from this link:
    <Download Photoshop Elements products | 13, 12, 11, 10>
    Your redemption code/Serial number will work with these downloaded products.
    Make sure you download the correct version for your operating system - Windows or Apple MAC
    Good luck.

  • How to Set NLS parameters in SqlDeveloper for current and future connection

    Hi
    I've downloaded sqldeveloper version 1.5.4(build main-5940)
    when I try to set NLS parameters as following it is thrwoing following error
    TOOLS->PREFERENCES->DATABASE-->NLS parameters
    on right side pane
    I've changed
    SORT----->BINARY_CI
    COMP----->LINGUISTIC
    then it is generating following log file
    SEVERE     43     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:ORA-00600: internal error code, arguments: [qctosop:like transform], [], [], [], [], [], [], []
    SEVERE     44     114     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     45     7     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     46     9     oracle.dbtools.db.DBUtil     
    SEVERE     47     1     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     48     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     49     5     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     50     0     oracle.dbtools.db.DBUtil     
    SEVERE     51     1     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     52     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     53     5     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     54     0     oracle.dbtools.db.DBUtil     
    SEVERE     55     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     56     1     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     57     4     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     58     0     oracle.dbtools.db.DBUtil     
    SEVERE     59     1     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     60     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     61     4     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     62     1     oracle.dbtools.db.DBUtil     
    SEVERE     63     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     64     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     65     5     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     66     0     oracle.dbtools.db.DBUtil     
    SEVERE     67     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     68     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     69     6     oracle.dbtools.db.DBUtil     Closed Connection
    SEVERE     70     0     oracle.dbtools.db.DBUtil     
    SEVERE     71     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    SEVERE     72     0     oracle.dbtools.raptor.nls.OracleNLSProvider     Error loading nls:Closed Connection
    please help me to set NLS parameters for current and future connections.
    thanks,
    harry

    Hi -K-
    actually I want to make SqlDeveloper to make case insensitive search.
    when I google, I've found to make oracle as case insensitive I need to set NLS_SORT to Binary_CI and NLS_COMP to LINGUISTIC
    Default SQLDEVELOPER NLSParmeters values are as NLS_SORT---->Binary and NLS_COMP--->Binary
    Now I want to make these as NLS_SORT---->Binary_CI and NLS_COMP--->LINGUISTICS.
    thanks,
    harry

  • Pre-configured Solution for Small And Medium Downstream Co's for Oil & Gas

    Hello Experts,
    Pl advise if we have Pre-configured Solution for Small And Medium Downstream Co's for Oil & Gas.?
    Any link or material for reading, please let me know.
    Background - We are working on the scope to finalise processes for Small And Medium Co's for Downstream business in ECC 6.0.
    Also advise how many and what kind of processes are involved related to P2P, Order to Cash and Finance.
    Regards
    Vinod Chincholkar

    Hi Vinod,
    i hope you can find the details in this link,
    you can download the sloution overview brochure...
    http://www.sap.com/industries/oil-gas/small/index.epx.
    Best Regards
    Satish

Maybe you are looking for