Provider supporting cryptographic algorithm not found

In our application we are encrypting some data values using JCE. The algorithm we are using is DES. The provider classes for this algorithm are in the sunjce_provider.jar file.
The application encrypts one value during the application container (BEA WLS 8.1) bootup. The sunjce_provider.jar file is being specified in the classpath used to boot the server up. This works fine. But later in the application where we are trying to decrypt this value using the same algorithm, we get this exception
NoSuchAlgorithmException - Cannot find any provider supporting DES/CBC/PKCS5Padding.
Not sure what would it work during server boot up and not afterwards.
Has anyone come across similar problem? Any help/hints would be greatly appreciated. FYI, we are running on the Linux platform.

Yes, there's a i !
But it's true that you can find it with another orthograph.
Go here and try it : http://www.esat.kuleuven.ac.be/~rijmen/rijndael/rijndael.zip
This is said to be the right place for Rijndael :
http://www.esat.kuleuven.ac.be/~rijmen/rijndael/
Hope this will help you...
Yann P.

Similar Messages

Apple support application is not found so can't access Itunes

Apple support application is not found so can't access Itunes

Same here. I'm thinking there's something going on with the iTunes store right now and that it's not just you.

Apple Support Application was not found

At first the error message read apple support was not found so I tried the standalone AAS install but now it just reads iTunes not installed correctly. Please reinstall iTunes. HELP!

You can try installing 7-Zip (free), then right-click on the iTunesSetup.exe or iTunesSetup64.exe file to unpack its contents, and install AppleApplicationSupport.msi as a standalone component. It may still not install successfully, but if it doesn't you may get a more useful error message regarding the reason why.
See also Troubleshooting issues with iTunes for Windows updates.
tt2

Recently changed my email provider. However, Calendar continues to try to send alerts to my old email provider. I have not found any way to tell Calendar to use the correct email address. I have chained iCloud, AppleID, and local email settings.

Sorry for the long title - I thought I had to explain my entire problem there ...
I recently switched ISPs, so now I have a new email address. I've updated mail, can send and receive successfully, recreated my iCloud account, and made sure my Contacts entry was correct. But Calendar's alert function stubbornly tries to send email to my old email address. I haven't found any way to change the list of email addresses that Calendar uses. This is the Calendar desktop app, not iCal. Any tips would be appreciated.

So what was the solution. I have a similar problem on all of my devices now

WSUS SP2; SCCM 2012 SP1; Sync failed: WSUS update source not found

Hi,
I have installed the Fresh SCCM 2012 SP1 and WSUS 3.0 SP2 + KB2720211 + KB2734608. However, still the Sync is getting failed. This is what I am getting in the wsyncmgr and WCM logs:
wsyncmgr:
Sync failed: WSUS update source not found on site PR1. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource
SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
3668 (0x0E54)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=3668 GMTDATE=Fri Jan 09 18:00:00.537 2015 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found
on site PR1. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
3668 (0x0E54)
Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
1/9/2015 12:00:00 PM 3668 (0x0E54)
WCM:
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
Did not find supported version of assembly Microsoft.UpdateServices.Administration.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
Did not find supported version of assembly Microsoft.UpdateServices.Administration.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Supported WSUS version not found SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
STATMSG: ID=6607 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.489 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Remote configuration failed on WSUS Server.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.515 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
I have used the default port numbers 80 and 443 still the sync is failing. Please provide your advise to fix this issue.
Regards,
Malwinder

WCM:
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
It's not only a matter of installing the console, but also those hotfixes on a remote server ...
Torsten Meringer | http://www.mssccmfaq.de

Server not found in Kerberos database (7)

Hi!
Running the examples from
http://java.sun.com/javase/6/docs/technotes/guides/security/jgss/lab
works fine for me as long as I use the Kerberos test realm I have set up on a unix machine. But when I run the same classes against our Active Directory, the client spills a stacktrace, indicating that AD can not find the server in its database. But it actually is in that database, as the sample server can perfectly authenticate as exactly that principal!
Enabling all security related debug info i could find, this is the client dump:
$ java -Djava.security.auth.login.config=jaas-krb5.conf
     -Djava.security.krb5.kdc=##KDC##
     -Djava.security.krb5.realm=##REALM##
     -Dsun.security.jgss.debug=true
     -Dsun.security.krb5.debug=true
     -Djava.security.debug="logincontext,policy,scl,gssloginconfig"
     GssClient host ##SERVER##
scl: getPermissions ProtectionDomain (file:/xxxxx/ <no signer certificates>)
sun.misc.Launcher$AppClassLoader@11b86e7
<no principals>
java.security.Permissions@1a46e30 (
(java.io.FilePermission \xxxxx\- read)
(java.lang.RuntimePermission exitVM)
scl:
Debug is true storeKey false useTicketCache true useKeyTab true doNotPrompt false ticketCache is nu
ll isInitiator true KeyTab is null refreshKrb5Config is false principal is xxxxx tryFirstPass is tru
e useFirstPass is false storePass is false clearPass is false
Acquire TGT from Cache
KinitOptions cache name is C:\xxxxxAcquire default native Credentials
Obtained TGT from LSA: Credentials:
client=##USER##@##REALM##
server=krbtgt/##REALM##@##REALM##
authTime=20070705103930Z
startTime=20070705103930Z
endTime=20070705203930Z
renewTill=20070712103930Z
flags: FORWARDABLE;RENEWABLE;INITIAL;PRE-AUTHENT
EType (int): 23
Principal is ##USER##@##REALM##
                [Krb5LoginModule] authentication succeeded
        [LoginContext]: login success
Commit Succeeded
        [LoginContext]: commit success
Authenticated principal: [##USER##@##REALM##]
Connected to address ##SERVER##/xxxxx
xxxxx
create server name with host@##SERVER##
Search Subject for Kerberos V5 INIT cred (<<DEF>>, sun.security.jgss.krb5.Krb5InitCredential)
Found ticket for ##USER##@##REALM## to go to krbtgt/##REALM##@##REALM## expiring on Thu Jul
05 20:39:30 GMT 2007
Entered Krb5Context.initSecContext with state=STATE_NEW
Found ticket for ##USER##@##REALM## to go to krbtgt/##REALM##@##REALM## expiring on Thu Jul
05 20:39:30 GMT 2007
Service ticket not found in the subject
Credentials acquireServiceCreds: same realmUsing builtin default etypes for default_tgs_enctypes
default etypes for default_tgs_enctypes: 3 1 23 16 17.
CksumType: sun.security.krb5.internal.crypto.RsaMd5CksumType
EType: sun.security.krb5.internal.crypto.ArcFourHmacEType
KrbKdcReq send: kdc=##KDC## UDP:88, timeout=30000, number of retries =3, #bytes=1328
KDCCommunication: kdc=##KDC## UDP:88, timeout=30000,Attempt =1, #bytes=1328
KrbKdcReq send: #bytes read=101
KrbKdcReq send: #bytes read=101
KDCRep: init() encoding tag is 126 req type is 13
KRBError:         sTime is Thu Jul 05 14:43:05 GMT 2007 1183646585000
         suSec is 487997
         error code is 7
         error Message is Server not found in Kerberos database
         realm is ##REALM##
         sname is host/##SERVER##
         msgType is 30
KrbException: Server not found in Kerberos database (7)
        at sun.security.krb5.KrbTgsRep.<init>(Unknown Source)
        at sun.security.krb5.KrbTgsReq.getReply(Unknown Source)
        at sun.security.krb5.internal.CredentialsUtil.serviceCreds(Unknown Source)
        at sun.security.krb5.internal.CredentialsUtil.acquireServiceCreds(Unknown Source)
        at sun.security.krb5.Credentials.acquireServiceCreds(Unknown Source)
        at sun.security.jgss.krb5.Krb5Context.initSecContext(Unknown Source)
        at sun.security.jgss.GSSContextImpl.initSecContext(Unknown Source)
        at sun.security.jgss.GSSContextImpl.initSecContext(Unknown Source)
        at GssClient$GssClientAction.run(GssClient.java:171)
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.security.auth.Subject.doAs(Unknown Source)
        at Jaas.loginAndAction(Jaas.java:94)
        at GssClient.main(GssClient.java:97)
Caused by: KrbException: Identifier doesn't match expected value (906)
        at sun.security.krb5.internal.KDCRep.init(Unknown Source)
        at sun.security.krb5.internal.TGSRep.init(Unknown Source)
        at sun.security.krb5.internal.TGSRep.<init>(Unknown Source)
        ... 13 more
Exception in thread "main" java.security.PrivilegedActionException: GSSException: No valid credentia
ls provided (Mechanism level: Server not found in Kerberos database (7))
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.security.auth.Subject.doAs(Unknown Source)
        at Jaas.loginAndAction(Jaas.java:94)
        at GssClient.main(GssClient.java:97)
Caused by: GSSException: No valid credentials provided (Mechanism level: Server not found in Kerbero
s database (7))
        at sun.security.jgss.krb5.Krb5Context.initSecContext(Unknown Source)
        at sun.security.jgss.GSSContextImpl.initSecContext(Unknown Source)
        at sun.security.jgss.GSSContextImpl.initSecContext(Unknown Source)
        at GssClient$GssClientAction.run(GssClient.java:171)
        ... 4 more
Caused by: KrbException: Server not found in Kerberos database (7)
        at sun.security.krb5.KrbTgsRep.<init>(Unknown Source)
        at sun.security.krb5.KrbTgsReq.getReply(Unknown Source)
        at sun.security.krb5.internal.CredentialsUtil.serviceCreds(Unknown Source)
        at sun.security.krb5.internal.CredentialsUtil.acquireServiceCreds(Unknown Source)
        at sun.security.krb5.Credentials.acquireServiceCreds(Unknown Source)
        ... 8 more
Caused by: KrbException: Identifier doesn't match expected value (906)
        at sun.security.krb5.internal.KDCRep.init(Unknown Source)
        at sun.security.krb5.internal.TGSRep.init(Unknown Source)
        at sun.security.krb5.internal.TGSRep.<init>(Unknown Source)
        ... 13 moreWhy's AD claiming in the KRBError that it can't find a sname/realm which exactly matches the principal it accepted for the server? This totally confuses me! Can please anyone bring some light?
Regards

It works now!!!
The exact procedure is:
- Create a new user in AD with an arbitrary name <username>. Use the same name in "User Logon Name", "User Logon Name (pre Win2K)" and "First Name" (odd, isn't it).
- Set the password, deactivate "User has to change the password at first logon", and activate "Password never expires"
- Create a mapping for the service name by entering into the command line: ktpass -princ "<protocol>/<fqdn>@<realm>" -mapuser "<username>@<realm>" -pass "*" -out dummy.keytab
- Check that the mapping is set and unique; use adsiedit.msc (Windows Support Tools).
- Now you can use the Java tool ktab to create your own keytab as usual and go.
But it is a science in its own right to correctly configure an Active Directory , especially for use with Kerberos. In particular error messages are hardly useful (as it is generally the case in the Kerberos world). It may help to read:
http://www.microsoft.com/downloads/details.aspx?FamilyID=99b0f94f-e28a-4726-bffe-2f64ae2f59a2&DisplayLang=en
and
http://www.microsoft.com/downloads/details.aspx?FamilyID=7dfeb015-6043-47db-8238-dc7af89c93f1&displaylang=en
Have fun!

TS3297 I have installed, reinstalled, repaired, retarted and followed all trouble-shooting tasks; Now I am getting "Apple Supprt Application not found: error 2(Windows 5). Please uninstall and reinstall itunes. I have done that. It is listed in my progra

I am trying to install itunes on my computer (Windows Vista). After initial instillation I got an error 42404 A required itunes componenet is not installed; please repair or re-intall itunes and error 50, cannot access itunes store at this time. Please try later. I have done that multiple times; uninstalled all components, reinstalled all components, repaired all components, restarted my computer. I have changed firewall settings to allow acess to all of the apple components. I have made sure the required ports are open. All of the components are showing on the installed programs section of my control panel.
I am now getting an error message that says that Apple Support Application is not found error 2 (windows 5). It is listed in the installed programs and I have repaired it.
I am out of options. And help would be appreciated.

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Entry not found in database buffer - notif_create

Experts
Hopefully you can help me here because I can't find what the problem is. I created my organization structure and the business partners, there is a rule that assigns the support team based on the subject and that works perfectly great but as soon as I specified the country to the support team in transaction BP the transaction notif_create sends this error when I try to save the support notification: "Entry not found in database buffer". Message no. COM_PARTNER109
Any help would be appreciate it

Hi,
Please kindly verify if these notes maybe helpful;
1048685    Contract determination does not work correctly
926540     Missing Organisational units
864281     Support Desk message contains errors
Hope this helps.
Cheers
SH

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a reso

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
Sorry for the long title, first time poster here.

This thread is pretty old, are you still having this issue?

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Unistall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Uninstall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.

HT1926 I cannot get iTunes to load -- "Apple Application Support was not found". I have tried multiple things to fix it and nothing works including re-installing.

I cannot get iTunes to load -- "Apple Application Support was not found". I have tried multiple things to fix it and nothing works including re-installing.

Try b noir's post Standalone Apple Application Support install to see if that can repair the problem or provide futher information, otherwise try reinstalling again as shown in Troubleshooting issues with iTunes for Windows updates.
tt2

OraOLEDB.Oracle Provider Not Found- Windows 7 64 bit Excel 2010 32-bit Help

Currently, I have an excel 2010 application that users on Windows XP 32 bit are using to connect to an Oracle 32-bit database and extract data back into Excel. Each time they open the Excel file, the VBA code automatically creates a new connection using Provider =ORA.OLEDB.Oracle Provider. All users using the Excel file have installed Oracle 9.2.1 run-time client on their machine. All of that works well currently for over 100+ users on Windows XP 32-bit
Starting very shortly our company is moving to Windows 7 64-bit. We acquired a test PC with Windows 7 64-bit and Excel 2010 32-bit. We tried to install Oracle 9.0.2 run-time client but we couldn't connect to the database ( even with Sql Plus). We therefore downloaded Oracle 10g 10.2.04 Run-time client. With this installed, we were able to connect to via SQL Plus to the database. However, using the same Excel file and the following same VBA code.
Set cn = New ADODB.Connection
cn.Open ThisWorkbook.getDBCon()
Public Function getDBCon()
getDBCon = "Provider=OraOLEDB.Oracle;" & _
"Data Source=MyOracleDB;" & _
"User Id=" & getDBUser() & ";Password=" & getDBPss()
End Function
I get a "Provider Not Found error". The VBA code and file work perfect in XP 32-bit. It seems going over to Windows 64-bit has caused issues with the file's macro. I am looking for help assessing if I have more of an Oracle Client issue or a Microsoft ADO issue. Any input would be greatly appreciated. Thank You.

@damorgan
Yea agreed with Excel to Oracle comment. This is due to issues with global implementation of an ERP system and the disconnets between IT and Business. Therefore the business intelligence tables in oracle are most easily pulled and acted on by novice PC users via Excel. In the business, Excel is the standard tool novice non-IT people feel comfortable in to share and act on data. Most of these users have no IT knowledge whatsoever, so we create buttons and filters for them to query and then massage in Excel as they see fit.
Having said that, still wondering if it's a ADO or Oracle Client issue. This is something beyond my knowledge. I wouldn't imagine it's the Visual Basic issue since this same file works in Windows XP. I am not in the position to just scrap Excel as the business relies on this in production and I am the only support. What could 64 bit vs 32 bit differences be having here? Thank You.

Oracle 9.2 OLE DB Provider Not Found

Hi people,
Seem to have a similar issue with an earlier poster.... on two different machines (one with Visual Studio Enterprise Architect and the .Net Framework installed and one without using the default general purpose enterprise edition of 9.2 database install). Existing IIS + ADO applications now complain that the OraOLEDB.Oracle provider is not found. However, existing C++ -> ADO component applications do not have the same issue....
Giving "Everyone" "Full Control" to %ORACLE_HOME% and subdirs as an NTFS permssion seems to work but also seems a bit drastic.... Anyone with a more focused explanation of what is going wrong? Anyone with a more secure workaround, perhaps?
Thanks in advance,
Lachlan Pitts

All,
Although not part of the Oracle OLE DB Team, or with any real qualifications, I do have a little information gained from experimentation...
For those not up to date on this thread, the issue we all seem to have is when using the Oracle 9i Release 2 (9.2.0.1.0) OLE DB Provider (OraOLEDB.Oracle) with Microsoft's .NET framework, we receive the error OraOLEDB.Oracle not found when we attempt to open a connection. In the past, some have suggested that giving Everyone the security access Full Control to the Oracle home directory (such as C:\oracle\ora92) solves the problem. I tried this and to my surprise it did work. Unfortunately, I did not try giving the ASPNET user full control first (doh).
The reason this frustrates me is that something permanently changed while the permissions were open. The permissions can now be removed, and the provider still works fine.
The only modification I saw inside the Oracle home directory was to new oramts/trace/OracleMTSRecoveryService(*).trc files, with the timestamps corresponding to when the ASP.NET worker process (aspnet_wp) was started/restarted. I do not see the Oracle MTS Recovery service running on another machine with Oracle 9.0.x on it (although this may not mean anything). After these trace files were written I was able to remove the permissions changes I made (Everyone/Full Control), restarted the machine, and the OLE DB provider still worked fine -- seemingly using the latest trace file available (as I could delete all but the latest trace file). This file was being locked by the Oracle MTS Recovery service.
However, I can stop the Oracle MTS recovery service, delete the trace files, restart the web service, reboot the machine, etc, and still, the OLEDB provider works fine. Something else must have permanently changed while the permissions were open, maybe even something that didn't go into the Oracle home directory but something that was able to go somewhere else after the first trace file was written... If anyone can find out what it is (in the registry maybe?) that allows the OLEDB provider to work, I'd really like to know.
I think that this is a big enough problem that the Oracle developers should look at it -- maybe they would have insight as to what that MTS recovery service is up to, and how it relates to the OLE DB provider in regards to a fresh installation. Especially considering that Oracle is advertising this as the first OLEDB provider with full support for the .NET framework.
Best Regards,
Paul Hooper

Provider not found deploying en VS 2013

Hi all,
On a fresh PC install, I installed VS2013 and created a single 1 table, One screen lightswitch html app.
Triyng to make a deploy package fails with the error :
provider 'LightSwitchApplication' not found .... visit :
http://go.microsoft.com/fwlink/?LinkId=221672#ERROR_PROVIDER_NOT_FOUND
Searching results with solutions for VS2012 only (uncheck box for prerequisites while deploying)
3 days on that issue !!
Any help will be apreciated
Thank's,
Frederic

I was using right clic, build on the server folder! (I shoud have done that from the LS folder).
To bad loosing 3 days on that !!
I hope this will help someone.
Glad that you've solved this issue, thanks for sharing your experience.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Itunes won't install. Error message: Apple Application Support not found

Itunes won't install. Error message: Apple Application Support not found. What is the fix for this?

It is always these four updates that fail. I've tried downloading and installing them seperately from apple downloads. I've tried various recommended fixes, and nothing I can figure out works. Before these problems, itunes worked on the computer for a year.
Thank you again for wanting to help me.
Ken
1) Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243)
Installation date: 12/17/2011 7:58 PM
Installation status: Failed
Error details: Code 643
Update type: Important
A security issue has been identified leading to MFC application vulnerability in DLL planting due to MFC not specifying the full path to system/localization DLLs. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.
More information:
http://go.microsoft.com/fwlink/?LinkId=216803
Help and Support:
http://support.microsoft.com
2) Security Update for Microsoft Office Excel 2003 (KB2596954)
Installation date: 12/17/2011 7:56 PM
Installation status: Failed
Error details: Code 57E
Update type: Important
A security vulnerability exists in Microsoft Office Excel 2003 that could allow arbitrary code to run when a maliciously modified file is opened. This update resolves that vulnerability.
More information:
http://support.microsoft.com/kb/2596954
Help and Support:
http://support.microsoft.com/?LN=en-us
3) Update for Microsoft Office Outlook 2003 Junk Email Filter (KB2597035)
Installation date: 12/17/2011 7:56 PM
Installation status: Failed
Error details: Code 57E
Update type: Important
This update provides the Junk E-mail Filter in Microsoft Office Outlook 2003 with a more current definition of which e-mail messages should be considered junk e-mail.
More information:
http://support.microsoft.com/kb/2597035
Help and Support:
http://support.microsoft.com/?LN=en-us
4) Security Update for .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2478662)
Installation date: 12/17/2011 7:52 PM
Installation status: Failed
Error details: Code 80070BC9
Update type: Important
A security issue has been identified that could allow an attacker to compromise your Windows-based system that is running the Microsoft .NET Framework and gain complete control over it. You can help protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.
More information:
http://go.microsoft.com/fwlink/?LinkID=211424
Help and Support:
http://support.microsoft.com

Provider supporting cryptographic algorithm not found

Similar Messages

Maybe you are looking for