Providing F4 help for a feld in alv report

Hi,
I created ALV report.......In tthat report I want to allow the user to edit the field by
providing F4 help for that field............
Is there any ways two provide that............will be appreciated.
Regards,
Naveen M.

pass the field name and db table name in the ref_fieldname and ref_tabname in fieldcatalog
check this, this will clarify your doubt.
type-POOLs : slis.
data : BEGIN OF gt_vb OCCURS 0,
 auart type auart,
 END OF gt_vb.
DATA : gt_vbak type STANDARD TABLE OF vbak,
 gt_fcat TYPE slis_t_fieldcat_alv,
 gs_fcat TYPE slis_fieldcat_alv.
SELECT auart from vbak into TABLE gt_vb UP TO 50 ROWS."gt_vbak UP TO 50 ROWS.
gs_fcat-col_pos = 1.
gs_fcat-fieldname = 'AUART'.
gs_fcat-ref_fieldname = 'AUART'.
gs_fcat-ref_tabname = 'VBAK'.
APPEND gs_fcat to gt_fcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
 I_CALLBACK_PROGRAM = sy-repid
 IT_FIELDCAT = gt_fcat
TABLES
 t_outtab = gt_vb
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Edited by: soumya prakash mishra on Aug 17, 2009 10:54 AM

Similar Messages

Reg : F4 help for custom fields in ALV report

hi friends..
in my internal table i have fields including 1 custom field..
DATA : BEGIN OF i_final OCCURS 0,
pernr LIKE p0000-pernr,
begda LIKE p0000-begda,
plans LIKE ZPOSITION-plans, (custom)
werks LIKE pspar-werks,
end of i_final.
i want to display this i_final table in alv. for that i genetrate one fieldcatalog
PERFORM fcat USING:
 'I_FINAL' 'PERNR' 'P0000' 'PERNR' '15' 'X' '',
 'I_FINAL' 'BEGDA' 'P0000' 'BEGDA' '10' 'X' '',
 'I_FINAL' 'PLANS' 'ZPOSITION' 'PLANS' '8' 'X' '',
 'I_FINAL' 'WERKS' 'PSPAR' 'WERKS' '14' 'X' ''.
in custom table zposition, i maintain serch help for custom field "PLANS".
then i used reuse_alv_grid_display.. for all the std fields along wit custom fields
i got f4 all std fields but for my custom i am not getting the f4 help
how can i get the F$ help for this custom fields Zposition-plans..
plz give some idea

Hi
In that Ztable against the field
PLANS give the check table name as T528B
then it will automatically give the search help
or you can create your own search help(elementary) and add to that field
Reward if useful
regards
Anji

How to provide input help for a variant

Hi,
I have a parameter on the selection screen.
P_layout like disvariant-variant value check.
How do I provide input help for this parameter and also how do i check wheather the input entered is correct or not.

Hi,
You can create a serch help for the field and add it in program like:
P_layout like disvariant-variant match-code object 'Searche help name'.
then if you need to do any validation u can do it at selection screen:
like:
at selection-screen for P_layout.
if..conditions..
regards,

How to provide search help for input field

Hi Experts,
I have a field WBS elements on my selection screen view1 . I need to provide search help for that.
Can anyone please help how to proceed with that?
Regards,
Chitrasen

hi ,
pls refer this WIKI on SDN :
http://wiki.sdn.sap.com/wiki/display/WDABAP/UsingSearchhelpattachmentsforWebDynproABAP
refer this online SAP help :
http://help.sap.com/saphelp_nwmobile71/helpdata/en/3d/e53642e2a3ab04e10000000a1550b0/content.htm
also go thru this thhread :
Re: search help event
regards,
amit

How can we provide F4 help for parameter field.

Hi All,
How can I provide F4 help for parameter field.
Regards,
Amar

hi,
different ways of applying search help are :
you can use anyone:
1) CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
or
2)
can follow these simple steps for search help:
go to se11==> put some name after ticking search help radiobutton==> create==>
then tick " elementery search help " and press enter ===>then put description and table name in selection method ===>then put the field on which u want search help
in search help parameter==> tick IMP EXP ==> write 1 in lpos and spos===>save and activate===> double click on table name ===> select that field and press *search help tab* above===> then copy
3 )
methods of applyind search help:
For search help sometimes we use MATCHCODE----->when we apply it directly to parameter or select option.they are obselete now ii.For search help sometimes we CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST' ??------->if we want to populate data of internal table as search help.
iii.For search help sometimes we declare tablename-fieldname in selection?------>if that field in that table is having seach help or check table ..F4 will be avaliable directly.
also:
Fixed value of domain can also work as search help.
i hope it will help u a lot
thaks and regards
rahul sharma

Providing F4 help for a field

Dear All,
We have a requirement like providing f4 help for the field Purchase Requisitioner (appears in Items tab of ME51N). I know that we can extend the existing search help by using search help exits but not sure whether will i be able to create a new search help for a field in Std SAP Transaction.
Any inputs on how to do this will be appreciated...
Thank you all in advance,
Regards,
Lakshmi

You can add the INPUT help in an user exit provided.

How to add F1 help for a field on ALV grid

Hi All,
When we execute a program, the output is displayed using ALV grid.
on the ALV grid, if we press F1 on a field, it should popup the help document.
How to add F1 help for a field on ALV grid.
Thank you all in advance.

fill field LVC_S_FCAT-ROLLNAME of your fieldcatalog in method SET_TABLE_FOR_FIRST_DISPLAY
A.

Providing online Help for Flex-based applications

I have been asked to provide online Help for a Flex application. As I have never done this before, I have a few questions:
- What is the format for the Help topics?
- Are there control-type files (e.g., TOC, index, project file) that need to be created? If so, what is the format for these?
- Is the Help compiled? If so, which compiler is used?
- How is context-sensitive Help created?
I'd also like to know if there are any resources I could look at that covers these Help issues. Thanks.

Hi,
You can acheive the same by the addition of [USER-COMMAND fcode].
RADIOBUTTON GROUP group [USER-COMMAND fcode] - The addition USER-COMMAND can be used to assign a function code fcode to the first parameter in a radio button group. The function code fcode must be specified directly, and have a maximum length of 20 characters. When the user selects any radio button of the radio button group on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
So you code should be altered as
PARAMETERS: rb_appl RADIOBUTTON GROUP rad
                     USER-COMMAND radclick    "Addition which you have to make.
                     DEFAULT 'X',
            rb_pres RADIOBUTTON GROUP rad ,
            p_file   TYPE ibipparms-path.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
IF rb_appl = 'X'.
    PERFORM f_applictn_server_filenm.
ELSEIF rb_pres = 'X'.
    PERFORM f_presentation_filenm.
ENDIF.
Thanks & Regards,
Harish

How to Provide search Help for files on Application Server

Hi Guys,
 Can anyone tell me How to Provide search Help for files on Application Server. I have put a file name on selection screen. I want to give search help for files on application server.
Thanks & Regards.
Harish.

Hi Harish,
Use the following code,
tables sxpgcotabe.
data: lt_execprot LIKE btcxpm OCCURS 0 WITH HEADER LINE,
 w_filepath(60) TYPE c, --> length depending on your Directory path.
SELECT SINGLE *
 FROM sxpgcotabe
 WHERE name = 'LIST_DB2DUMP'
 AND opsystem = sy-opsys.
IF sy-subrc <> 0.
 SELECT SINGLE *
 FROM sxpgcotabe
 WHERE name = 'LIST_DB2DUMP'
 AND opsystem = 'UNIX'.
 IF sy-subrc <> 0.
 MESSAGE e000 WITH 'External operating system command '
 'LIST_DB2DUMP not found'.
 ENDIF.
ENDIF.
sxpgcotabe-parameters = p_filepath. --> provide the directory path.
CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
 EXPORTING
 commandname = sxpgcotabe-name
 additional_parameters = sxpgcotabe-parameters
 operatingsystem = sxpgcotabe-opsystem
 TABLES
 exec_protocol = lt_execprot
 EXCEPTIONS
 no_permission = 1
 command_not_found = 2
 parameters_too_long = 3
 security_risk = 4
 wrong_check_call_interface = 5
 program_start_error = 6
 program_termination_error = 7
 x_error = 8
 parameter_expected = 9
 too_many_parameters = 10
 illegal_command = 11
 wrong_asynchronous_parameters = 12
 cant_enq_tbtco_entry = 13
 jobcount_generation_error = 14
 OTHERS = 15.
IF sy-subrc <> 0.
 MESSAGE e000 WITH text-e01 p_filepath. "Directory failed
ENDIF.
Loop round the directory list, split each line up into a line table
and get the last data for each line, should be the filename
Then build the dirlist.
REFRESH t_dirlist.
LOOP AT lt_execprot.
 REFRESH t_dirline.
 SPLIT lt_execprot-message AT space INTO TABLE t_dirline.
 DESCRIBE TABLE t_dirline LINES w_nolines.
 READ TABLE t_dirline INDEX w_nolines.
 MOVE t_dirline-data TO t_dirlist-filename.
 APPEND t_dirlist.
ENDLOOP.
Here you will get all the files in the directory mentioned in Application server.
For displaying them as a Search help use the FM '/BMC/ZPOPUP_GET_VALUE'
Pass the Internal table to this FM.
Regards,
Paul.

Re: Problem providing download link for BLOB data in apex report

Hi Don,
Your solution below worked but in the download option i only see save but not open for PDf file in the blob. Please let me know if you have any suggestion to achieve it
Thanks
Jo
Problem providing download link for BLOB data in apex report
591953 Nov 19, 2008 1:55 PM (in response to 660436)
Currently Being Moderated
Good morning,
Here is how I have solved this problem.
1. The select statement in the sql for the report should not include the BLOB column. I decided to select only 2 columns, the column that has the key and the column with the filename.
2. On the first column ( the primary key ) I put in the format statement that was simply DOWNLOAD:TABLENAME:BLOB_COLUMN:PRIMARY_KEY
This works. I believe that the Oracle error I was getting was because I was trying to apply this format statement to the actual BLOB column.
So, it appears that you can use any of the columns in the report to hold the DOWNLOAD format statement since in the format statement, you are defining the BLOB table, BLOB column and the primary key into that column.
Hope this helps,
Don.

Branched out from a years old thread.
user3003326 Don't post to old threads, please.

Is there any transaction code for uploding logo in ALV reports.

is there any transaction code for uploding logo in ALV reports.

hi,
call function 'REUSE_ALV_COMMENTARY_WRITE'
       exporting
            it_list_commentary = t_header.
            i_logo             = 'Z_LOGO'.
endform.
Upload Logo for REUSE_ALV_COMMENTARY_WRITE
For those who wish to upload and use a picture in your ALV abap reports.
Steps for uploading Logo :-:
1. Goto the transaction OAER
2. Enter the class name as 'PICTURES'
3. Enter the class type as 'OT'
4. Enter the object key as the name of the logo you wish to give
5. Execute
6. Then in the new screen select Standard doc. types in bottom window
Click on the Screen icon
Now, it will ask for the file path where you have to upload the logo
7. Now you can use this logo in REUSE_ALV_COMMENTARY_WRITE
or
Import Logo and Background Picture for Reporting
In this step, you can import a customer-specific logo and a background picture into the R/3 System. These will be displayed in the header area of reports in HR Funds and Position Management.
From the SPRO:
HR Funds and Position Management --> Dialog Control --> Customize Reporting Interface --> Import Logo and Background Picture for Reporting.
Activities
1. Enter the Name of your logo/background picture as an object key in the initial screen.
2. Make sure that the class name is PICTURES, and the class type is OT.
3. Choose Execute.
4. Double-click the document type Picture on the Create tab page. A dialog box will appear in which you can enter the path in which the logo/background picture can be found.
5. Enter the path and choose Open. The logo will be uploaded into the current R/3 System. If the logo/background picture is to be transported into other systems as well, choose Transport.
6. Return to the initial screen and repeat the procedure after having entered the Name of your background picture as an object key.
Please note that the logo/background picture can only be displayed in ALV-based reports with an HTML header. Manually programmed reports such as business distribution plans are not based on the ALV.
If you have selected several initial objects, ALV-based reports in HR Funds and Position Management will automatically use a hiearchical-sequential display. A logo is not displayed here either. Note also that the logo cannot be printed (see print preview in program).
Make sure that the logo does not exceed a height of 100 pixels because it would mean that the header of the report will be scrollable.

Want to create F1 Help for radio button in my report

Hi All,
I want to create F1 Help for radio button in my report program. Which function module should i call in at selection screen on help-request
Also do I need to define the texts somewhere or I can pass it directly to the function module.

Try DYN_FIELD_F1_HELP,
~Suresh
that is only for Dic fields..
Pl take alook at this<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a243d9b511d1950e0000e8353423/frameset.htm">SAP Help</a>
~Suresh
Message was edited by: Suresh Datti

Hi please send code for displaying index in alv report

hi
thanx in advance.
code please for displaying index in alv report.
thanx
rocky

add one more field to ur internal table
index type i .
before u display ALV
loop at itab.
itab-index = sy-tabix.
modify itab index sy-tabix.
endloop.
Message was edited by:
chandrasekhar jagarlamudi

How to add a search help for a field in alv?

HI!Everyone ,
i want to add a search help created by myself for one field in alv,
and i want to use this function "HELP_VALUES_GET_WITH_TABLE".
can anyone help me ?
thanks!

HI,Vijay.
My code like this :
 PERFORM build_fcat.
 PERFORM build_objects.
 PERFORM layo_build.
 PERFORM set_drdn_table .
 CALL METHOD alv_grid->set_table_for_first_display
 EXPORTING
 i_structure_name = 'STU_S'
 is_layout = s_layo
 CHANGING
 it_outtab = itab_out
 it_fieldcatalog = i_fcat
 ."Period
 IF sy-subrc <> 0.
 EXIT.
 ENDIF.
for example, there is a field 'UNAME' IN Structure 'STU_S',
i want to add a search help for 'UNAME'.
the 'UNAME' is not users in SAP R/3 , i want to add some data by myself or from a table .

How to pass custom search help(F4 help) for a field in ALV output?

Hi,
I want to activate the F4 help in ALV output for a field for which we do not have search help assigned at table ,data element and domain level.
In field catalog i have enabled it by below line.
ls_fcat-F4AVAILABL = 'X'.
but because there are no standard input help available it is giving message as "No input help is available".
so how to pass our custom search help (g_search) for any field in ALV output.
I am using object oriented ALV grid display.
Thanks!!!
Rajesh Gupta.

hi,
check this out:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b3d5e890-0201-0010-c0ac-bba85ec2ae8d
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/acdefb13-0701-0010-f1a2-8eeefa7d3780
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b3d5e890-0201-0010-c0ac-bba85ec2ae8d?quicklink=index&overridelayout=true

Providing F4 help for a feld in alv report

Similar Messages

Maybe you are looking for