Want to create F1 Help for radio button in my report
Hi All,
I want to create F1 Help for radio button in my report program. Which function module should i call in <b>at selection screen on help-request</b>
Also do I need to define the texts somewhere or I can pass it directly to the function module.
Try DYN_FIELD_F1_HELP,
~Suresh
that is only for Dic fields..
Pl take alook at this<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a243d9b511d1950e0000e8353423/frameset.htm">SAP Help</a>
~Suresh
Message was edited by: Suresh Datti
Similar Messages
-
Hello All,
I am getting F1 help when the radio buttons are in display mode but i am not getting F1 help when the buttons are in input mode. what cud be the problem?
can anyone please help me. required urgerntly
Thanks & Regards
Amarender Reddy BHi,
use event
at selection-screen on HELP-REQUEST FOR
rb_radio
As with the addition ON VALUE-REQUEST the field psel_low_high
is either the name of a report parameter or of the form sel-LOW
or sel-HIGH, where sel is the name of a selection criterion.
When the user presses F1 on the relevant field, the subsequent
processing block is executed. You can thus implement a
self-programmed help for the input/output fields of the
selection screen. If the program contains such an event and the
user presses F1, the system processes this rather than
displaying the documentation of the Dictionary field - even if
the report parameter or the selection option with LIKE or FOR
points to a Dictionary field.
Regards
amole -
How to create search help for field in interactive adobe form
HI
I want to create search help for PERNR field in adobe form.
how i can do it.
Can any one giud me.
Regards,
Laxman SankhlaHi Laxman,
Please search SDN, there are lots of queries posted and solved earlier on this.
especially there are step by step blogs.
Cheers,
Sai -
My form has a list of yes or no questions. I want to use either cheboxes or radio buttons. Unfortunatly I can't make it work. When I check yes for one question, it marks all yes answers for all other questions. If I mark some radio buttons to answer, it unmarks later. Need immediate help!!!
Is it that you are using a PDF-based form? Did you copy and paste the Yes/No fields all the way down your form? If so, then all of the yes/no boxes are copies of each other and have the same name and properties in the PDF.
For example, if you had:
Question 1 and Question 1 Yes/No checkboxes
Question 2 and Question 1 Yes/No checkboxes
Question 3 and Question 1 Yes/No checkboxes
Question 4 and Question 1 Yes/No checkboxes
Then whatever answer you selected in Question 1 would populate down through the rest of the form.
Changing the Yes/No field properties in questions two through four would eliminate the problem.
I hope that helps,
Brian -
iPhoto is changing the sequence of the photos I have in my file for the book I want to create. Help?
The problem has been solved. As it turns out, I was highlighting the photos in the album I wished to create. And then generating the request for a book. This caused the photo images when loaded into the book format to revert to the sequence used when I originally loaded them into the album. Not the edited sequence. Turns out that I did not need to highlight the photos. By eliminating this step, they remained in the edited sequence.
Thank you for responding. Warmly, Janice huseby -
How to create authorisation object for save button please help in abap
how to create authorisation object for save button please help in abap
Hi
In general different users will be given different authorizations based on their role in the orgn.
We create ROLES and assign the Authorization and TCODES for that role, so only that user can have access to those T Codes.
USe SUIM and SU21 T codes for this.
Much of the data in an R/3 system has to be protected so that unauthorized users cannot access it. Therefore the appropriate authorization is required before a user can carry out certain actions in the system. When you log on to the R/3 system, the system checks in the user master record to see which transactions you are authorized to use. An authorization check is implemented for every sensitive transaction.
If you wish to protect a transaction that you have programmed yourself, then you must implement an authorization check.
This means you have to allocate an authorization object in the definition of the transaction.
For example:
program an AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT <authorization object>
ID <authority field 1> FIELD <field value 1>.
ID <authority field 2> FIELD <field value 2>.
ID <authority-field n> FIELD <field value n>.
The OBJECT parameter specifies the authorization object.
The ID parameter specifies an authorization field (in the authorization object).
The FIELD parameter specifies a value for the authorization field.
The authorization object and its fields have to be suitable for the transaction. In most cases you will be able to use the existing authorization objects to protect your data. But new developments may require that you define new authorization objects and fields.
http://help.sap.com/saphelp_nw04s/helpdata/en/52/67167f439b11d1896f0000e8322d00/content.htm
To ensure that a user has the appropriate authorizations when he or she performs an action, users are subject to authorization checks.
Authorization : An authorization enables you to perform a particular activity in the SAP System, based on a set of authorization object field values.
You program the authorization check using the ABAP statement AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT 'S_TRVL_BKS'
ID 'ACTVT' FIELD '02'
ID 'CUSTTYPE' FIELD 'B'.
IF SY-SUBRC <> 0.
MESSAGE E...
ENDIF.
'S_TRVL_BKS' is a auth. object
ID 'ACTVT' FIELD '02' in place 2 you can put 1,2, 3 for change create or display.
The AUTHORITY-CHECK checks whether a user has the appropriate authorization to execute a particular activity.
This Authorization concept is somewhat linked with BASIS people.
As a developer you may not have access to access to SU21 Transaction where you have to define, authorizations, Objects and for nthat object you assign fields and values. Another Tcode is PFCG where you can assign these authrization objects and TCodes for a profile and that profile in turn attached to a particular user.
Take the help of the basis Guy and create and use.
Regards
ANJI -
How to create F1 help for fields of a table in SM30
I have a z-table which is being maintained using SM30. while creating new entries for the z-table using this SM30 i want to create F1 help which will be useful for the user to create new entries. can anyone pls help we this requirement?
Hi Lalitha,
To have F1 help documentation, you need to create Documentation by pressing Documentation button in the Change Data Element screen (SE11)
If you need certain values for the field through F4 help then you need to specify the values in the Domain of this Data element (SE11)
Jogeswara Rao K -
Func- Code for Radio-button in Module-pool Prg.
Hi Friend's.
I have define 2 Radio button
on Module-pool screen.
I am not been able to triger the Radio button in
Pai .
How can i assign the function code for
radio-button in module-pool.
pls can any one help meHi,
For radion buttons, what ever the name you will give that name only will hold that value ( Either selected or not ). But this variable should be declared as global variable in main program.
Still if you want to assign function code, you can assign one like other fields on the screen. -
How to create a radio button in ALV Reports
Hi all,
Best wishes to all..
Kindly reply me to this question... that is "How to create a radio button in ALV Report"
Thanks and Regards
AnjaliHI
here is an example :
PROGRAM ZUS_SDN_BCALV_GRID_DEMO_2.
Based on: BCALV_GRID_DEMO.
TYPE-POOLS: icon.
TYPES: BEGIN OF ty_s_sflight.
INCLUDE TYPE sflight.
TYPES: button1 TYPE lvc_emphsz.
TYPES: button2 TYPE lvc_emphsz.
TYPES: button3 TYPE lvc_emphsz.
TYPES: button4 TYPE lvc_emphsz.
TYPES: END OF ty_s_sflight.
DATA:
gt_sflight TYPE STANDARD TABLE OF ty_s_sflight,
gt_fcat TYPE lvc_t_fcat.
DATA: ok_code LIKE sy-ucomm,
gt_sflight TYPE TABLE OF sflight,
g_container TYPE scrfname VALUE 'BCALV_GRID_DEMO_0100_CONT1',
grid1 TYPE REF TO cl_gui_alv_grid,
g_custom_container TYPE REF TO cl_gui_custom_container.
CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-DATA:
md_cnt TYPE i.
CLASS-METHODS:
handle_hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING
e_row_id
e_column_id
es_row_no
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_hotspot_click.
define local data
FIELD-SYMBOLS:
<ls_entry> TYPE ty_s_sflight,
<ld_fld> TYPE ANY.
READ TABLE gt_sflight ASSIGNING <ls_entry> INDEX es_row_no-row_id.
CHECK ( <ls_entry> IS ASSIGNED ).
Set all radio buttons "unselected"
<ls_entry>-button1 = icon_wd_radio_button_empty.
<ls_entry>-button2 = icon_wd_radio_button_empty.
<ls_entry>-button3 = icon_wd_radio_button_empty.
<ls_entry>-button4 = icon_wd_radio_button_empty.
ASSIGN COMPONENT e_column_id-fieldname OF STRUCTURE <ls_entry>
TO <ld_fld>.
IF ( <ld_fld> IS ASSIGNED ).
Set selected radio button "selected".
<ld_fld> = icon_wd_radio_button.
ENDIF.
Force PAI followed by refresh of table display in PBO
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'DUMMY'
IMPORTING
RC =
ENDMETHOD. "handle_hotspot_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
MAIN *
PERFORM select_data.
CALL SCREEN 100.
MODULE PBO OUTPUT *
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
IF g_custom_container IS INITIAL.
CREATE OBJECT g_custom_container
EXPORTING container_name = g_container.
CREATE OBJECT grid1
EXPORTING i_parent = g_custom_container.
PERFORM build_fieldcatalog.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'SFLIGHT'
CHANGING
it_fieldcatalog = gt_fcat
it_outtab = gt_sflight.
Set event handler for event TOOLBAR
SET HANDLER:
lcl_eventhandler=>handle_hotspot_click FOR grid1.
else.
CALL METHOD grid1->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
FINISHED = 1
others = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDMODULE. "PBO OUTPUT
MODULE PAI INPUT *
MODULE pai INPUT.
to react on oi_custom_events:
CALL METHOD cl_gui_cfw=>dispatch.
CASE ok_code.
WHEN 'EXIT'.
PERFORM exit_program.
WHEN OTHERS.
do nothing
ENDCASE.
CLEAR ok_code.
ENDMODULE. "PAI INPUT
FORM EXIT_PROGRAM *
FORM exit_program.
CALL METHOD G_CUSTOM_CONTAINER->FREE.
CALL METHOD CL_GUI_CFW=>FLUSH.
LEAVE PROGRAM.
ENDFORM. "EXIT_PROGRAM
*& Form BUILD_FIELDCATALOG
text
--> p1 text
<-- p2 text
FORM build_fieldcatalog .
define local data
DATA:
ls_fcat TYPE lvc_s_fcat,
ls_hype TYPE lvc_s_hype.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
i_structure_name = 'LVC_S_FCAT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DELETE gt_fcat WHERE ( fieldname <> 'EMPHASIZE' ).
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
i_structure_name = 'SFLIGHT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_fcat INTO ls_fcat
WITH KEY fieldname = 'EMPHASIZE'.
IF ( syst-subrc = 0 ).
DELETE gt_fcat INDEX syst-tabix.
ENDIF.
ls_fcat-fieldname = 'BUTTON4'.
ls_fcat-icon = 'X'.
ls_fcat-hotspot = 'X'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON3'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON2'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON1'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
LOOP AT gt_fcat INTO ls_fcat.
ls_fcat-col_pos = syst-tabix.
MODIFY gt_fcat FROM ls_fcat INDEX syst-tabix.
ENDLOOP.
ENDFORM. " BUILD_FIELDCATALOG
*& Form SELECT_DATA
text
--> p1 text
<-- p2 text
FORM select_data .
define local data
DATA:
ls_sflight TYPE ty_s_sflight.
SELECT * FROM sflight INTO CORRESPONDING FIELDS OF TABLE gt_sflight.
ls_sflight-button1 = icon_wd_radio_button.
ls_sflight-button2 = icon_wd_radio_button_empty.
ls_sflight-button3 = icon_wd_radio_button_empty.
ls_sflight-button4 = icon_wd_radio_button_empty.
MODIFY gt_sflight FROM ls_sflight
TRANSPORTING button1 button2 button3 button4
WHERE ( carrid IS NOT INITIAL ).
ENDFORM. " SELECT_DATA
Regards,
Prasanth
Reward all helpful answers -
I want to create a link (or a button)
I want to create a link (or a button) from a cell in one sheet in a spreadsheet to another cell in a second sheet in the same spreadsheet. Some people call it a Hyperlink in Excel. So what happens when you click on the cell in the 1st sheet it takes you to the specified cell in the second sheet. Does anyone know how to do this? Or is there a way to do this.
I am using Numbers V3.2
And my operating system is osx 10.9.3Numbers can only (at this time) link to URL (on the internet) or a file on your computer NOT an anchor in the document. There are not buttons in Number on Mac OS X.
You can post feedback to Apple using the menu item "Numbers > Provide Numbers Feedback"
SGIII posted an Applescript to jump between sheets so maybe a quick search for that would help you script this behavior by jump to specific text (anchors):
see here:
Table navigation
. You may also be able to use search if you leave text like "ANCHOR_JUMP1" and "ANCHOR_THING2". Then you can search for "ANCHOR" -
I want to build a form with radio buttons to limited clients ticking every option.
I want to build a form with radio buttons to limited clients ticking every option. I have a range of products and in order to quote accurately I want to get specific information.
If I get this , you want to show form options to specific clients not to all site viewers ?
You would need to create a secure zone for this where permitted viewers can login and view the form with all options , in form itself we cannot setup this as few customers will view other options and others will view a different one.
This can be done from your hosting end. Or if you are using Adobe server for hosting then you can create some profiles for customers and then setup a separate form altogether to achieve this.
Thanks,
Sanjit -
Global binding for radio buttons needs tweaking
When selecting global binding for a text or numeric field, its corresponding field with the same name also changes to global binding.
However when doing this for radio button exclusion groups, the other radio button groups don't automatically change to global. You have to do it manually.Found the problem in another topic:
scott sheck - 1:30am Jun 29, 07 PST (#6 of 7)
A pasted radio button is automatically added to an existing exclusion group if the last added item was a radio button. This is in the help.
I wish there was a default to turn this off because I don't want to add a temporary item just to get a new exclusion group. -
Help with radio buttons and show/hide javascript
Hi. I'm new working with LiveCycle and also pretty much at a basic/beginner level of javascripting. I'm creating a pdf fillable form and one of the tasks I've been given is to add a function where if Option A is chosen by the user, then the correspondng table will appear, and if Option B is chosen another table will appear. After some searching I Iearned more about how radio buttons can be used, so I created a set of radio buttons. I have tried several different things, the latest was making both tables "hidden", and then taking to the radio button list group and applying the show/hide script to each of the radio buttons in the group. Still nothing seems to be working as I want it to. The table remains hidden when I click on the . This is what the code looks like right now. I know I'm obviously doing something wrong, this seems like such a basic thing to code. Getting to the frustration point, if you can sort me out with what I am missing/overlooking please let me know. Many thanks!
Note. The radio buttons are not in the same table, they are higher up in the form outside of the tables that I am trying to show/hide, but they are in the same subform. I don't know if that might be an issue?
form1.#subform[0].RadioButtonList::click - (JavaScript, client)
form1.#subform[0].RadioButtonList.#field[0]::click - (JavaScript, client)
if ( RadioButtonList.#field[0].selectedIndex == 1)
form1.#subform[0].Table1_Work.presence = "visible"
else
form1.#subform[0].Table1_Work.presence = "hidden"
form1.#subform[0].RadioButtonList.#field[1]::click - (JavaScript, client)
if ( RadioButtonList.#field[1].selectedIndex == 2)
form1.#subform[0].Table1_Official.presence = "visible"
else
form1.#subform[0].Table1_Official.presence = "hidden"Hi,
For starters you have unnamed pages, which is not a good idea. This makes it more difficult to reference objects. In your JavaScript you would have to resolve the node, however the simpliest route would be to name the page first. Something like "page1". Have a look at this example for referencing objects: http://assure.ly/kUP02y.
Next I would not place the script in each of the radio buttons, as this is likely to cause conflicts and is doubling the script. The best place to put the script is in the click event of the radio button exclusion group. This contains all of the radio buttons. See an example here: http://assure.ly/h7whb8 and https://acrobat.com/#d=ALebgueDXjewHjGyYRdrmw.
You syntax for JavaScript if/else statements is potentially incorrect. The script within the statements should be wrapped in curly brackets. While you can get away with it for single lines, I would not be inclined to take that approach. So:
if (a test) {
// do something
else {
// do something else
With the radio button exclusion group you can use its rawValue, just specify it in the Object > Binding palette. So on the basis of chaning the page name:
if (this.rawValue == "1") {
page1.Table1_Work.presence = "visible";
else {
page1.Table1_Work.presence = "hidden";
There is a syntax checker button in the Script Editor that should highlight errors.
Niall -
How to set value for radio button in sap crm survey suite
Hi ,
I created a survey in CRM Service, in which I added a question with answer as '10 Selection Button Group ('radio button'). And answer has 11 answer options (which means 11 radio buttions). Now when we test the survey, the value for the radio buttons is appearing like 'id_0050569b03091ee480a29d8ee61e953c'. But i want to set a specific value for each radion button (from 1 to 11). So, how to set value for radio button in sap crm survey suite???.
Thanks & Regards,
SeshuHi,
I found solution myself. Click on Goto -> Editing Mode -> Expert Mode. Now you can set value for radio button.
Regards,
Seshu -
Creating search help for a field in AdHoc Query
Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
KirstenHi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten
Maybe you are looking for
-
How to Get data into I_ table which is Created dynamically
Hi Guys , I created one dynamic internal table , now I am want to display same internal table in my ALV? , how can I populate data into this internal table from my internal table based on some condition. My Requirement is? I have to display like this
-
Free cases issue + question
I just watched the PC, and Steve said that we would receive free cases. He said that next week Apple would have a site up that allowed you to choose which case you wanted to get for free. Bumpers aren't the only ones that are being given away. There
-
Last purchase price of item per plant
Good day! Need help retrieving the last purchase price of an item per plant regardless of the vendor. i know they are in EINA and EIPA tables but i couldn't extract them. anybody knows a query for this? Thank you very much for your help.
-
any good free MP4 converter out there?
-
Apple product registration/ apple iPad 2 accessories
How to register Apple accessories like IPad dock, iPad camera connection kit? As u know, the product inside comes with a paper tht states 1 year warranty! But when I go to apple product registration page to register my products, I couldn find the na