Proxy Server Settings

Trying to filter traffic from my Galaxy through my laptop in order to monitor some traffic.  When I modify my network config and save, it adds a new Network with a duplicate name and has a status of Not in Range.  I thought this set up was pretty straight forward but I appear to be missing something.  ANy ideas?

Hey, Tim,
I ran the lab WITHOUT being connected to anything. I did sometimes have to tell
Internet Explorer to "Try Again", but the test environment always came up on the
second try. I think it might be looking for the XML namespace "http://www.openuri.org/".
But, when it can't find it (like when my laptop is not connected to anything), it
still worked for me. Try disconnecting from your LAN, if you can't get it to work
any other way.
Good luck,
B²
"Tim Naegele" <[email protected]> wrote:
>
I am trying to run step #2 on pg 13 of Lab05-DBC.
When I run the service the build starts but I get an error that the namespace
could
not be found.
This is followed by another error that URL to java.sun.com port:80 could
not be reached.
Since, I have to work through a proxy-server to reach the web, do you know
if I need
to
specify the server setting in workshop or wehlogic.xml to do this ?

Similar Messages

  • Current 3.6.3 version works fine on my laptop; however, when i download the update version, 3.6.4, it will download but i can't open any internet sites and firefox says it refuses the proxy server settings, which never changed during the download

    when mozilla opens up automatically after download, the message that the proxy server settings are refused comes up on the opening mozilla screen. it also says it cannot recognize any websites that i try to load.

    hello jlzibell, please go through the troubleshooting steps described at [[Websites say cookies are blocked - Unblock them]].

  • Proxy Server Settings Inside WRT300N v1.1

    I have setup a linksys WRT300N behind another router so i can use it as a wireless connection. The first router is using an ip scheme of 10.200.251.0 /24 and the linksys is using 192.168.1.0 /24 I have them connected and working fine except we connect to the internet via a proxy. Is there a way to authenticate the proxy with a specific username and password inside the router so the router logs in all the wireless connections instead of putting the proxy address in the browser. I have tried putting it in the browser which wont work and i think its because the proxy is on the 10.200.251.0 /24 network which the 192.168.1.0 /24 network cant connect to for some reason. 
    If anyone could provide any help on how i can achieve this it would be greatly appreciated . 

    No its not possible to use the Proxy Sever using the Linksys Router and on the Router setup page you don't have any option to input any Proxy Server settings.

  • When I relaunch firefox 8 the proxy server settings reset back to Manual even after I change to autodetect

    When I relaunch firefox 8 the proxy server settings reset back to Manual even after I change to autodetect

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • I can't get my QuickTime Player to play; I get an error message that says I need to reset my Proxy Server settings.  WHA??

    I can't get my QuickTime Player to play; I get an error message that says I need to reset my Proxy Server settings.  WHA??

    Norton is probably the issue. It can really screw things up, that is one reason I never use it. See if you can temporarily disable it and then try the sync and see if that works.
    On a Mac, there is a way to run a program that repairs permissions for the user, not a Windows thing.

  • Proxy server settings in Nokia ASHA 501

    Is there any way to input proxy server settings for wi-fi network. My institute provides internet via wi-fi connectivity, but we have to use certain proxy servers with authentication  to access the net

    My 501 Asha set also creating problem in connecting wifi at my institution's proxyserver Wifi connection 
    As it shows wifi connected but browser could not open anything.

  • How to disable system proxy server settings

    If I want to use URL.openStream() to get an InputStream to a remote file, but don't want the JVM to use the system proxy settings to do the connection, what shall I do?
    I saw a piece of code as follows
    System.setProperty("http.proxyHost","i.do.not.exist.fiction");
    System.setProperty("http.proxyPort","80");
    but this doesn't work in Java 1.4.0_01
    Instead of trying connecting to a valid remote host without using a proxy (presumably because the supplied proxy cannot be found), the JVM actually throws a FileNotFoundException although the remote file is there (and can be accessed by, say, Internet Explorer).

    Ok. Your changing the http proxy to something that is valid, although the server does not exists. Try setting the "http.proxyHost" property to null.
    You can find more information in:
    http://java.sun.com/j2se/1.4/docs/guide/net/properties.html
    Bye.

  • How do I put in proxy server settings?

    Thete is a proxy fot wifi at my college. I cannot find any option to put in those settings in my browser

    That won't work. The Options Window page is for Firefox on the desktop. Try https://addons.mozilla.org/en-US/mobile/addon/proxy-mobile/ or edit the proxy preferences by typing about:config in the address bar and filtering on proxy.

  • All proxy server settings in mac lab deleted possibly after a firefox update? How can I recover settings without manually doing on all machines?

    Most (if not all) of my lab machines have lost their proxy settings...weird...has never happened before. Because the settings were in firefox, I assume it is because of a recent firefox update. First...is there any way to revert back to the previous settings so I don't have to manually reconfigure all users on all machines. Second...please make sure that this doesn't happen again when updates are implemented. Third...does anybody know anything about pushing out a proxy setting through ARD?

    Sound like a corrupted or deleted file prefs.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
    See:
    * http://kb.mozillazine.org/Preferences_not_saved

  • How do I create a configuration profile that has wireless settings including a manual proxy server.

    I can configure the wireless network using the IPCU but cannot set the proxy server settings.
    I'm sure that this is simple but just can't work it out!

    IPCU does not currently allow entry of proxy server settings.  This must be done, from the device, for each wi-fi network.  It would be great if it did.....

  • Facing severe problem in IE10 of automatically getting clicked on "use a proxy server" every 5 minutes in LAN Settings whereas it is not required to use any proxy server at all when directly connected through ISP broadband.

    Using Window 8 Pro with IE 10 but facing tremendous problem in LAN settings. Every 5 minutes, it automatically gets clicked on "Use a Proxy Server for the LAN" and am unable to open any page unless the said setting is unclicked. The same applies
    while using Chrome or Firefox browsers.... none of the browsers behave properly and have to repeatedly unclick on proxy server settings (in IE or Chrome) and change settings on Firefox.
    Any suggestions to get rid of this problem...??? Thanks

    Hi,
    It seemed that some malware changed your registry which make proxy server enabled.
    Did you install any proxy agent software recently? If you did, please try uninstalling it now. And then make a full scan
    with malware removal tool.
    http://www.microsoft.com/security/pc-security/malware-removal.aspx
    Or locate to registry,
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings, set "ProxyEnable" = dword:00000000.
    For more information, you can refer to
    http://support.microsoft.com/kb/819961
    Andy Altmann
    TechNet Community Support

  • Disabling Firefox 9 Proxy Connection settings using GPO (in Server 2008)

    I am planning to disable Proxy Server settings in the connection settings in the Firefox options. I downloaded "firefoxdefaults & firefoxlock". Made these changes in the GPO (mentioned below)
    Computer Settings
    1. Delete Private Data cookies
    2. Phishing Protection - Enabled.
    3. Proxy Settings - Disabled
    4. HomePage - Enabled.
    5. Extension and Theme Installation - Preference State (Locked) & Allow Addin Installation _ Disallowed.
    User Settings
    6. Proxy Settings - Disabled.
    GPO didnt apply properly. Can you please let me know if there is any other options there to disable proxy settings. Hoping to see your message.

    Hi,
    We can add the sites to trusted site and clear temp files for test. Detail steps are in the following KB.
    even though the steps in this KB is related to XP, we can refer to update the steps to apply to windows 7.
    How to troubleshoot problems accessing secure Web pages with Internet Explorer 6 Service Pack 2
    http://support.microsoft.com/kb/870700/en-us
    If it is not the case, this may be an issue with your proxy setup, if you use a proxy server, try turning it off in your windows network settings.
    For more information, please see:
    Change proxy server settings in Internet Explorer 9
    http://windows.microsoft.com/en-in/windows/change-ie9-proxy-server-settings#1TC=windows-7
    For more reasons that can cause webpage load slowly or don’t slow at all, please see:
    Webpages load slowly or don't load at all
    https://support.google.com/chrome/answer/113910?hl=en
    Please note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Hope this helps,
    Ada Liu
    TechNet Community Support

  • Use proxy server

    I have installed Fiddler software but it seems it changes proxy server settings beside tracking all browser activity due to statistics.
    When I uninstalled Fiddler I noticed error in Mozilla as all browsing was refused:
    The proxy server is refusing connections
    Firefox is configured to use a proxy server that is refusing connections.
    Check the proxy settings to make sure that they are correct.
    Contact your network administrator to make sure the proxy server is working.
    I have seen that login as another user will work but the same settings will not work under user where is installed Fiddler.
    There is AUTO detecting proxy and use a proxy server.
    How to manage that it will be set use a proxy server but solve browsing when I uninstall Fiddler?
    Is there some Windows 8 configuration as Mozilla is hit by Fiddler.

    Hi,
    I have checked previous posts. I understand it is default Use proxy system and I can use NO proxy. It is an issue that software hits Mozilla settings for the user as Use proxy system and browsing will not work anymore. Fiddler should warn users that even if you use uninstall it will not bring back settings.
    This is time consuming as Mozilla is not responsible.
    Is there system data inside Windows 8 to bring back working Use proxy system in Mozilla for user where is installed Fiddler? I like to use default due to security.

  • How to add Proxy server to internet explorer using a Group Policy 2008

    Hi,
    I am using active directory of Windows Server 2008 R2 x64. I have a proxy server from Microsoft TMG 2010.
    What I need to do is I need to add Proxy server settings to the browser via the GPO. How can I do it?
    Thanks in advance.
    Yosh
    --------------------------------------------------------------------------------- YOSHIKA04 ------------------------------------------------------------------------------

    > instead.  That's all very well but using above IE 8 isn't supported in
    > preferences.
    It IS supported. Either use a newer OS or manually edit the XML:
    http://blogs.technet.com/b/asiasupp/archive/2011/03/30/internet-explorer-9-ie9-group-policy-preferences-gpp.aspx
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Proxy server

    I have a Lenovo 3000 desktop. I am not sure whether my question has to do with my computer or with my browser, so I will post it on this forum and a Google Chrome forum.
    I use Nero 7 Essentials and when copying a CD I am given the opportunity  to download track details from an internet database. It doesn't work and Nero has told me that I may need to enter my proxy server settings in its database connection settings. Where do I find these settings (assuming that I have a proxy server)? Are these on my computer or are they to be found somewhere in my browser settings.
    Solved!
    Go to Solution.

    that means you do not go through a Proxy Server. You connect to the Internet directly.
    *Non Lenovo employee*
    I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

Maybe you are looking for