Proxy to file communication prerequiste

Hi,
I have a scenario where i need to communicate SAP sytem with Non-Sap system We are using Proxy to file communication. Please let me know prerequiste to develop this scenario i.e. before proceeding with the design, configuration do i need to create any RFC destination or something?
Also i created a msg interface for my outbound in XI. but I could not see the namepsace of Ob in R/3 system to generate proxy. Please guide me on this.

Hi
First activate the proxy using the following blog..
How do you activate ABAP Proxies?
and for sender proxy use this blog..
ABAP Proxies in XI(Client Proxy)
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
How to create proxy.
if you have any kind issues let me know..
Regards
Vijay

Similar Messages

Problem with Configuration in Production ( ABAP Proxy - XI - FILE)

Hi All,
I have a ABAP Proxy -> XI -> FILE scenario wich is working perfectly in DEV and QAS environment.
When the person responsible for transporting tried to transport the objects in QAS to PRD, the following error happened:
Direction of communication channel |BS_MA_FileServer_PRD | CC_File_PedidosServ_MA_FileServer_IA is incorrect.
Correct the direction or choose another communication channel
BS_MA_FileServer_PRD - Business System (FILE)
CC_File_PedidosServ_MA_FileServer_IA - My FILE Communication Channel
This was what the Basis person sent to me. I don't have access to know exactly what happened. And I really don't know what could be wrong or if maybe a component was created wrongly in Production.
Hope you can help.
Points will be given.
tks.. Daniela

You have mentioned FILE is on the receiving side and ABAP proxy is on sender side.
But the error pasted by you clearly shows syntax of a Sender Agreement .
For receiver agreement it should be |<Sender Service>| |BS_MA_FileServer_PRD | CC_File_PedidosServ_MA_FileServer_IA
Bipin

Proxy to file scenario issue

Hi,
I am trying to configure a Proxy to file scenario.
My sender service is ERP system and the my receiver is PI file system.
These are the steps I followed:
1. Created a sender business system for Web AS abap (my ERP system)
2. Created a receiver business system for third party (my PI system)
3. I created all the interface objects(datatype, message type, message interface etc) in Integration repository.
4. In the ERP system , I configured http connection of type h to PI system and also configured lcrsaprfc, sapsldapi connections of type t. I followed this blog: How do you activate ABAP Proxies?
5. I also configured the ERP system as local integration engine, by setting the role to application system in sxmb_adm (followed the above blog).
5. Now I generated proxy in sproxy transaction for the outbound interface.
6. Then I created the communication channel, receiver agreement, interface determination and receiver determination in Integration directory.
7. I created a abap program to call the execute_asynchronous method.
Now the issue is, when I execute my report, nothing happens. I can see the success xml message in sxmb_moni in ERP system. No message is seen on the PI's sxmb_moni. The file is not written either to ERP or PI systems.
Since I am new to PI, I am not sure where to begin with.
If anybody can help that would be great.
Thanks
MLS

Hi
Check the following
1. RFC connection between R/3 and PI
2. You said Business system of type third party (PI) is receiving it. Try Business system standalone Java. If PI system is already defined in Landscape as Integration server. It will not show any message output.
3. message is shown in sxmb_moni in your ERP that measn proxy is able to receive all objects and passed it from there.
4. Check in SMQ2 outbound queue of ERP as well as inbound queue for PI if message exist.
5. While configuring in ID you dont need a sender agreement. Did you created one.
Thanks
Gaurav

File to proxy and proxy to file asynchronous

Hi Experts
Through my scenario I have to send xml files to file system from R/3 and vice versa. I am using Sender is proxy and receiver CC is file and vice versa. Here in R/3 25 tables having 25 different structures and sender and receiver data structure is same in XI. So for each structure I have to create 1 Data Type, Message Type, I/O interface and Message mapping and Interface mapping in IR. I am right?
In ID sender is Proxy (so no need to create sender CC and Sender interface).
For each interface can I create 1 receiver file communication channel or not? Or one communication channel is enough? Bcz, for above 25 interfaces target system is same and processing file names are different.
E.g. - file name is like <TABLENAME><TIME_STAMP>.XML here I want save the file in target directory like <TABLENAME><TIME_STAMP>.XML for this what I have to do?.
For this can I create how many interface determinations and receiver determinations I have to create?
What is the good procedure to do this interface please give me your valuable inputs.
And vice versa I have to do same like this for this I have to pick xml file from source directory based on first in first out by sorting according to timestamp. Once IX read this file from source directory I have keep this file in archive directory? (Means I have to keep this file from source to archive folder)
What is the procedure to do this? Please explain.

Hi,
As per my knowledge I will give you small suggestion. If it should be 25 tables then,
Create a Common data type which contains fields like,
<Source>
    <Table_Name>
   <Field1>
   <Field2>
Create a report which fills the filed for each table.
Create a file Structure which contains table name.
Using the variable Substitution create a file name. Processing parameter use Add Time Stamp.
For more details..
[http://help.sap.com/saphelp_nw70/helpdata/EN/bc/bb79d6061007419a081e58cbeaaf28/content.htm]
So this time you need only one interface and one scenario.
As the same
Do the reverse flow also.
In sender file adapter processing mode select archive. Give the archive directory name.
Select Processing Sequence by date. So file will poll according to date and time.
For more details..
[http://help.sap.com/saphelp_nw70/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm]
Regards,
Prakasu.M

ABAP proxy scenario file - PI7.1- ECC NO_MAPPINGPROGRAM_FOUND

Hello Experts,
I have ABAP proxy scenario file -> PI7.1->ECC . I am getting an error for communication between PI and ECC system. the error is NO_MAPPINGPROGRAM_FOUND and pointing to operation mapping in the software component.
What i found in TCODE SXMB_MONI is 2 adaptor call one from one below the other out of which one is in error.
Also when a file is passed from the file server to the SAP PI I see 2 entries in SXMB_MONI for the same Payload one from source system to target system and one from target system to source system ( ie. from business component as sender and ECC as receiver system and one entry for ECC system as receiver and business system for file as receiver ) is this how it should be
one more thing i would like to specify is that my service interface is Point to point enabled . Is it happening because of that
Request you help on urgent basics
BR Heth

Hi,
1. in PI, by hazard, your Service Interface (SI) does not the mode "synchronous"?
2. or does this SI was declared firstly with "synchronous" mode and the proxy generated with this mode, and then you decided to put "Asynchronous"... without to regenerate the proxy in ECC?
If it's the case, in ECC, select your SI, do a right-click and regenarete the proxy.
3. for the 2nd message (returned by ECC to PI), have you seen the Payload content and SOAP Header?
Could you please also check the Pipeline (e.g CENTRAL, CENTRAL_BACK) ?
4. In SXMB_MONI of ECC, how many messages have you: one ? or two ?
Regards
Mickael

File Name for Proxy to File

Hi experts,
My Scenario proxy to file(FTP). Currently in my Sender Data Type Proxy one of the field holds the file name to be created at the FTP.
Could anyone help me how to use that field data (name) to create the file(FTP) with that name?
Thank you experts.
regards,
s.saravannan

Hi,
You can get the same by creating a simple UDF (one argument - fname) and use the following code:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String filename = fname;
conf.put(key, filename);
return "true";
Additional parameter, in Receiver communication channel is, provide file name as * and "Set Receiver File Name as Payload Attribute Value".
Regards,
Sachin Dhingra

Proxy Autoconfiguration File, Authenticated Proxy and iTunes iPad/iPod updates

Hi All,
Please can someone advise if there is anything that can be done to get iPad/ Ipod updates working using iTunes and an authenticating proxy server?
Scenario is as follows:
1. Proxy settings in IE is configured using a proxy autoconfiguration file (PAC file).
2. The URLS *.apple.com is allowed to bypass authentication on the Proxy server.
3. Itunes is used to update the devices from a PC running windows as OS.
When Itunes is opened, the connection to the Itunes store works 100%. The iOS downloads using iTunes is also successfull.
Issue:
As soon as the downloaded iOS is being extracted and communicated to the devices, iTunes fails with an error code of 3004..
It seems like the PC is trying to make direct connections out instead of using the proxy settings in the PAC file.
Any advice / ideas to get this working?
Regards

HI,
From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
If you have Safari 3rd party plugins, they may not be compatible with 10.6. Go here for trouble shooting.
If you use GlimmerBlocker by chance, that could be the culprit. Check out this thread.
http://discussions.apple.com/thread.jspa?messageID=10589731
http://support.apple.com/kb/TS1594
Same with any Input Managers. Move any files in the /Library/InputManagers folder to the Trash
If you are running Safari in 64 bit mode, try running in 32-bit mode instead. Right or control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode. Also, (in that same window) make sure Safari is NOT running in Rosetta.
Go to ~/Library/Cookies and move the Cookies.plist file to the Trash.
Try Open DNS - Free / Basic
If Safari still can't open web pages, go to the Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop. Relaunch Safari. If Safari loads web pages then that .plist file needs to be moved to the Trash.
Carolyn

IIS Proxy SAR file needed

Hi all:
   I would like to implement the IIS Proxy SSO solution. Is there anybody can send me the IIS Proxy SAR file ?
   I cannot find it in service.sap.com/patches
   my mail : [email protected]
   I will give you the reward points.
   thanks.

Hi,
To my knowledge IISProxy is not supported/delivered by SAP anymore. See the OSS note 886214 for details. You can use WebDispatcher as reverse proxy and SPNego for SSO authentication. They are supposed to be replacements for what you could do with IISProxy.
So I doubt you will find IIS Proxy inside Service Marketplace. Doesn't mean that you cannot get it anywhere else though.
Regards,
Mike

Unable to open database : error , ora-03113 end of file communication

Hi Guys ,
I am facing a serious issue with my database
machine Oracle Linux Tikanga 5
database : 10.2.0.1
Error : ora-03113
I was trying to drop a logfile , while inserting the data ....
I restored and tried recovering it but it recovers with message , media recover complete but doesnot allows to open the database
gives the same error : Error : ora-03113 end of file communication
alert_log shows
alter database recover if needed
start
Media Recovery Start
ORA-264 signalled during: alter database recover if needed
start
Wed Jan 9 16:20:18 2013
db_recovery_file_dest_size of 2048 MB is 40.79% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Wed Jan 9 16:22:02 2013
alter database recover datafile list clear
Wed Jan 9 16:22:02 2013
Completed: alter database recover datafile list clear
Wed Jan 9 16:22:02 2013
alter database recover datafile list
1 , 2 , 3 , 4 , 5
Completed: alter database recover datafile list
1 , 2 , 3 , 4 , 5
Wed Jan 9 16:22:02 2013
alter database recover if needed
start
Media Recovery Start
ORA-264 signalled during: alter database recover if needed
start
Wed Jan 9 16:22:07 2013
alter database open
Wed Jan 9 16:22:07 2013
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=16, OS id=2049
Wed Jan 9 16:22:07 2013
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=17, OS id=2051
Wed Jan 9 16:22:07 2013
Repairing half complete open of thread 1
Wed Jan 9 16:22:07 2013
Errors in file /d1/app/oracle/oradata/orcl/bdump/orcl_lgwr_1966.trc:
ORA-00600: internal error code, arguments: [3712], [1], [1], [0], [445262], [0], [445261], []
Wed Jan 9 16:22:08 2013
Errors in file /d1/app/oracle/oradata/orcl/bdump/orcl_lgwr_1966.trc:
ORA-00600: internal error code, arguments: [3712], [1], [1], [0], [445262], [0], [445261], []
LGWR: terminating instance due to error 470
Instance terminated by LGWR, pid = 1966
can you please suggest on the same ..
Thanks

Due to the nature of the error and to prevent any trial-and-error, I would highly recommand you to open a service request with Oracle asap.
Oracle too recommands the same.
Thanks...

Getting error when testing Proxy to File interface

Hi Guru's,
While I am testing a Proxy to File Interface, using SPROXY transaction i am sending a message from R/3 to PI.
the message showing successful in R/3 Moni,but in PI moni I am getting the following Error..
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In this inreface, I am suppose to send the mesasage to only one Target system(ftp server) . i have checked in ID part also,
every thing is clear in ID. Can any body please tell where the mistake might exists...
Thanks in advance..
Regards
Raj

Hi,
No receiver could be found means Check your Receiver Determination. Activate and update cache. Asysnchronous messages can be manually restarted.
have you seen this threads,
NO_RECEIVER_CASE_ASYNC
No receiver could be determined
regards,
ganesh.

Proxy to File using EOIO

Hi Experts,
I have a scenario where I need to send data from SAP to PI so I am using proxy to file scenario. Here i need to send huge amount of data.
In some blog i saw that proxy can handle only some maximum amount of data.(but not 100% sure how much size of data the proxy can handle)
So i decided to call the proxy multiple times by sending only some 'n' no. of records and kept the receiver file adapter in append mode.
The problem here is the data is not appending in the order in which i am sending from SAP. In sxmb_moni the messages were showing the QoS as 'EO'.
Is it possible to change the QoS to EOIO?
Thanks & Regards
Stephen Rouvier

From SAP documentation:
"The sender of a message uses the attribute Quality of Service (QoS) to determine how a message is delivered"
hence ..as the File adapter supports all Qos, the Proxy can be called with Qos EOIO and the adapter will maintain the Qos as requested.
You should how ever try and send the data in a bulk and see how the Proxy handle it.
What is the nature of the data exported and for what purpose?

Scenario PROXY - SENDER FILE - RECEIVER FILE

Hi Experts,
I need to create a synchronous scenario where the proxy sends the filename to send and PI must transfer the file to a location X. The source file is in a different location of the destination file
This scenario, should this be done through Process Integration?
Thanks,

Hi,
I think you can use a sync/async bridge to do your scenario and you wont need any development outside of using standard modules. The idea is to create a scenario Proxy(sync)-File(Async) -File (Async) without BPM. Check the point 8 in this document http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80f96dbf-adca-3010-ffb5-daf2d1f0e276?QuickLink=index&…
I have never tested this with the SFTP channel, and i dont know if this adapter supports the RequestOneWayBean and WaitResponseBean modules. May be you should wait to someone that confirms to you the possibility of using this modules with the SFTP adapter.
Regards.

Including helper classes in java proxy jar file

I must not be using the right header search criteria because I'm sure this question
has been asked before. In a Web Service File (.jws) I've imported a couple of
helper classes that function as data transfer objects. I did this to maintain
consistency with other portions of the application. The Java Proxy jar file generated
by Workshop does not include these files. Is there a way of including these dependencies
or do I need to distribute another jar file with my helper classes?

Hi Naichen,
I was able to successfully run both the autotype and clientgen Ant task, on the
WSDL you provided. The code behind those Ant tasks are pretty much what the WebLogic
Web Services test page run. Are you using WLS 8.1 SP2? If not, you might want
to try with that version.
Regards,
Mike Wooten
"Naichen Liu" <[email protected]> wrote:
>
>
>
Hi,
I am having a warning message when trying to generate java proxy jar
file on weblogic8.1
webservice test web app, the message is as follows:
"Warning Failed to generate client proxy from WSDL definition for this
service.
Prescription Please verify the <types> section of the WSDL."
in the mean time, on weblogic starting terminal, I saw the following
exceptions,
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\AlphaLength4Deserializer.java:36: cannot resolve symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkLengthFacet(__typed_obj,4L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\OSIFieldAnonTypeDeserializer.java:36: cannot resolve
symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkMaxLengthFacet(__typed_obj,69L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\AlphaLength2Deserializer.java:36: cannot resolve symbol
symbol : class FacetUtils
location: package binding
weblogic.xml.schema.binding.FacetUtils.checkLengthFacet(__typed_obj,2L);
^
C:\DOCUME~1\u252738\LOCALS~1\Temp\wlwproxy37508.jar1533409921\com\ual\www\rcc\cb
t\schema\modifypnr\FreeFormAnonTypeDeserializer.java:36: cannot resolve
symbol
symbol : class FacetUtils"
Can anybody help me about this issue? I attached WSDL file, also United
Airlines
got an enterprise weblogic license deal with BEA, any help will be highly
appreciated.
Thanks!!!
Naichen

Proxy to file interface , need to have field name aslo in the file

Hi , i ahve done a interface from Proxy to file , in which , i have to give a label name of all the fields in the top of the file which acts as header in my fields , is there ant option in the XI to give header or label
please help me in this
thanking you
sridhar

Hi Sridhar,
This link might be helpful:[http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm]
Regards
Bhanu
Intelligroup.

Error in Proxy to File scenario

Hello All,
I m doing Client Proxy, ABAP proxy to file scenario.
I hv done all the configurations in IR & ID.
I hv also created proxy in sender R3 system.
But messages are not going successfully from R3.
when i checkin SXMB_MONI of R3 i get following error
<SAP:Stack>Error when receiving by HTTP (error code: 110, error text: )</SAP:Stack>
Message is in SYSFAIL status in SMQ2.
Any clues how it can be solved??
Thanks in adv.
Mahi

Hi Maheshwari,
Please try as mentioned below
Option 1: Go to SXMB_ADM->Manage Queues and Deregister all the Queues.Use transaction SMQR or SMQ2 to reset the status of queues
For this to initiate processing of messages stuck in the queue, make sure to set following IS configuration parameter
MONITOR QRFC_RESTART_ALLOWED to value 1
Option 2: Check the user associated with the RFC destination AI_RUNTIME_JCOSERVER in sm59 transaction. It is generally SAPJSF. Might be posisble the user password is expired or locked. Log on to j2ee admin tool on the server side and update the password and then see if it works.
Thanks
Amit
Reward points if answer is helpful

Proxy to file communication prerequiste

Similar Messages

Maybe you are looking for