Getting error when testing Proxy to File interface

Hi Guru's,
While I am testing a Proxy to File Interface, using SPROXY transaction i am sending a message from R/3 to PI.
the message showing successful in R/3 Moni,but in PI moni I am getting the following Error..
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In this inreface, I am suppose to send the mesasage to only one Target system(ftp server) . i have checked in ID part also,
every thing is clear in ID. Can any body please tell where the mistake might exists...
Thanks in advance..
Regards
Raj

Hi,
No receiver could be found means Check your Receiver Determination. Activate and update cache. Asysnchronous messages can be manually restarted.
have you seen this threads,
NO_RECEIVER_CASE_ASYNC
No receiver could be determined
regards,
ganesh.

Similar Messages

Getting error when testing a web service through WS Navigator

Hi experts,
I am using PI 7.1
I am getting the following error while testing the web servicefrom WS navigator
com.sap.engine.services.webservices.espbase.server.additions.exceptions.ProcessException: No operation found using soap keys [],
I did the following developement
1 created service interface in Integration repository
2. generated java bean skeleton on NWDS
3. deployed it on JPR
4 created Endpoints
Pls suggest some solution to fix the problem.
Thanks & Regards
Nitin

Check this guide:
http://wiki.sdn.sap.com/wiki/display/JSTSG/(WSR)Problems-P04
Regards,
Ravi

CS4 - Getting error when opening a .gif file - file-format module cannot parse the file.

I am getting this popup error when trying to open a .gif file:
"Could not complete your request because the file-format module cannot parse the file."
This comes up every time I try to open a .gif file. Even if I make a .gif file (like the image included in this post), save it and then try to open it again, I get the same error. I tried reinstalling CS4, but the error is still there. I have also done the reset on start-up and nothing. Some have suggested that I open it in (Windows XP Pro) MS Paint and then save it again. Did it and this does NOT work for me, either.
I know it's a Photoshop problem because I can see this file everywhere, except Photoshop. It will open here, there and everywhere, except for Photoshop.
I've searched the Adobe Commmunity and it looks like no one has come up with a fix for this. I'm just currious after 5 years with this problem, has there been a solution?
Scott

One of the files that has the error is in my first post.
Adobe Photoshop Version: 11.0
Operating System: Windows XP 32-bit
Version: 5.1 Service Pack 3
System architecture: AMD CPU Family:15, Model:10, Stepping:0 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 6
Processor speed: 3210 MHz
Video Card: NVIDIA GeForce GTX 460
Video Mode: 1280 x 1024 x 4294967296 colors
Video Card Driver: nv4_disp.dll
Driver Version: 6.14.13.0623
Built-in memory: 3289 MB
Free memory: 257 MB
Memory available to Photoshop: 1677 MB
Memory used by Photoshop: 69 %
Image cache levels: 4
Serial number: xxxxxxxxxxxxxxx
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS4\
Temporary file path: C:\DOCUME~1\xxxxxx\LOCALS~1\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
F:\, 233.7G, 145.7G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS4\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   ACE.dll   ACE 2008/08/27-18:10:41
   AdobeLinguistic.dll   Adobe Linguisitc Library   4.0.0
   AdobeLM.dll   AdobeLM   3.0.11.10077    53.352460
   AdobeLM_libFNP.dll   FLEXnet Publisher (32 bit)   11.5.0.1 build 57427
   AdobeOwl.dll   Adobe Owl
   AdobeOwlCanvas.dll   Adobe Owl Canvas
   AdobePDFL.dll   PDFL 2008/08/20-20:15:08
   AdobeUpdater.dll   Adobe Updater Library
   AdobeXMP.dll   Adobe XMP Core
   AdobeXMPFiles.dll   Adobe XMP Files   4.2.2   53.352624
   AdobeXMPScript.dll   Adobe XMP Script   4.2.2   53.352624
   adobe_caps.dll   Adobe CAPS   2,0,99,0   2.135373
   adobe_epic.dll   Adobe EPIC   3.0.1.10077    53.352460
   adobe_eula.dll   Adobe EPIC EULA   3.0.1.10077
   AFlamingo.dll   AFlamingo
   AGM.dll   AGM
   ahclient.dll    AdobeHelp Dynamic Link Library   1, 3, 12, 0
   aif_core.dll   AIF   1.0
   aif_ogl.dll   AIF   1.0
   amtlib.dll   AMTLib   2.0.1.10077    53.352460
   amtservices.dll   AMTServices   2.0.1.10077    53.352460
   ARE.dll   ARE 2008/08/27-18:10:41
   asneu.dll    AsnEndUser Dynamic Link Library   1, 6, 0, 8
   authplay.dll
   AXE8SharedExpat.dll   AXE8SharedExpat
   AXEDOMCore.dll   AXEDOMCore
   Bib.dll   BIB
   BIBUtils.dll   BIBUtils
   cg.dll   NVIDIA Cg Runtime   2.0.0015
   cgGL.dll   NVIDIA Cg Runtime   2.0.0015
   CoolType.dll   CoolType 2008/08/27-18:10:41
   data_flow.dll   AIF   1.0   53.352475
   ExtendScript.dll   ExtendScript
   FileInfo.dll   Adobe XMP FileInfo   4.2.2
   FNP_Act_Installer.dll   FLEXnet Publisher (32 bit)
   icucnv36.dll
   icudt36.dll
   image_flow.dll   AIF   1.0   53.352475
   image_runtime.dll   AIF   1.0   53.352475
   JP2KLib.dll   JP2KLib 2008/06/11-20:19:53   53.100857   53.100857
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   MPS.dll   MPS 2008/07/07-10:33:04   53.350311   53.350311
   msvcp71.dll   Microsoft® Visual Studio .NET   7.10.3077.0
   msvcr71.dll   Microsoft® Visual Studio .NET   7.10.3052.4
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS4   CS4
   Plugin.dll   Adobe Photoshop CS4   CS4
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (32 bit)   1.0.0.73
   PSArt.dll   Adobe Photoshop CS4   CS4
   PSViews.dll   Adobe Photoshop CS4   CS4
   registration.dll   Registration
   SCCore.dll   ScCore
   shfolder.dll   Microsoft(R) Windows (R) 2000 Operating System
   WRServices.dll   WRServices
Installed plug-ins:
   3D Studio 11.0
   ADM 3.11x01
   Accented Edges 11.0
   Angled Strokes 11.0
   Average 11.0
   BMP 11.0
   Bas Relief 11.0
   Camera Raw 5.0
   Chalk & Charcoal 11.0
   Charcoal 11.0
   Chrome 11.0
   Cineon 11.0
   Clouds 11.0
   Collada 11.0
   Color Halftone 11.0
   Colored Pencil 11.0
   CompuServe GIF 11.0
   Conté Crayon 11.0
   Craquelure 11.0
   Crop and Straighten Photos 11.0
   Crop and Straighten Photos Filter 11.0
   Crosshatch 11.0
   Crystallize 11.0
   Cutout 11.0
   Dark Strokes 11.0
   De-Interlace 11.0
   Dicom 11.0
   Difference Clouds 11.0
   Diffuse Glow 11.0
   Displace 11.0
   Dry Brush 11.0
   Embed Watermark 3.0
   Entropy 11.0
   Extrude 11.0
   FXG 11.0
   FastCore Routines 11.0
   Fibers 11.0
   Film Grain 11.0
   Filmstrip 11.0
   Filter Gallery 11.0
   Fresco 11.0
   Glass 11.0
   Glowing Edges 11.0
   Google Earth 4 11.0
   Grain 11.0
   Graphic Pen 11.0
   HDRMergeUI 11.0
   Halftone Pattern 11.0
   IFF Format 11.0
   Ink Outlines 11.0
   Kurtosis 11.0
   Lens Blur 11.0
   Lens Correction 11.0
   Lens Flare 11.0
   Lighting Effects 11.0
   Liquify 11.0
   MMXCore Routines 11.0
   Matlab Operation 11.0
   Maximum 11.0
   Mean 11.0
   Measurement Core 11.0
   Median 11.0
   Mezzotint 11.0
   Minimum 11.0
   Mosaic Tiles 11.0
   Multiprocessor Support 11.0
   NTSC Colors 11.0
   Neon Glow 11.0
   Note Paper 11.0
   Ocean Ripple 11.0
   OpenEXR 11.0
   PCX 11.0
   PNG 11.0
   Paint Daubs 11.0
   Palette Knife 11.0
   Patchwork 11.0
   Paths to Illustrator 11.0
   Photocopy 11.0
   Photoshop 3D Engine 11.0
   Picture Package Filter 11.0
   Pinch 11.0
   Pixar 11.0
   Plaster 11.0
   Plastic Wrap 11.0
   Pointillize 11.0
   Polar Coordinates 11.0
   Portable Bit Map 11.0
   Poster Edges 11.0
   Radial Blur 11.0
   Radiance 11.0
   Range 11.0
   Read Watermark 3.0
   Reticulation 11.0
   Ripple 11.0
   Rough Pastels 11.0
   Save for Web & Devices 11.0
   ScriptingSupport 11.0
   Send Video Preview to Device 11.0
   Shear 11.0
   Skewness 11.0
   Smart Blur 11.0
   Smudge Stick 11.0
   Solarize 11.0
   Spatter 11.0
   Spherize 11.0
   Sponge 11.0
   Sprayed Strokes 11.0
   Stained Glass 11.0
   Stamp 11.0
   Standard Deviation 11.0
   Sumi-e 11.0
   Summation 11.0
   Targa 11.0
   Texturizer 11.0
   Tiles 11.0
   Torn Edges 11.0
   Twain Acquire 11.0
   Twain Select 11.0
   Twirl 11.0
   U3D 11.0
   Underpainting 11.0
   Vanishing Point 11.0
   Variance 11.0
   Variations 11.0 (11.0x001)
   Video Preview 11.0
   WIA Support 11.0
   Water Paper 11.0
   Watercolor 11.0
   Wave 11.0
   Wavefront|OBJ 11.0
   Wind 11.0
   Wireless Bitmap 11.0
   ZigZag 11.0
Plug-ins that failed to load: NONE
Flash:
   Connections
   Kuler
Installed TWAIN devices:
   WIA-hp officejet 6100 series
   hp officejet 6100 series TWAIN

PSE9: Suddenly getting error when processing mutliple RAW files

I am usine PSE9 and went to process multiple RAW files today like I have done numerous times in the past. However, suddenly today even though the settings are still set for MAX JPEG I am getting promted to save each file as a PhotoShop file. Then all of a sudden it started processing all the files automatically as it has in the past but when completed I get the following error for each individual image file.
Start Processing Multiple Files
File: "C:\Users\desktop1\Desktop\2011_08_20_Early_Morning_Garden\_MG_0992.CR2"
Error: The parameters for command "Save" are not currently valid. (-25923)
I have made no changes to PSE9 and as said have performed this operation numerous times previously.
Any help would be greatly appreciated.
Thanks

Alternatively Tony should try using Canon’s Digital Photo Professional which came with his camera. It’s by far the best staring point for CR2 raw files.

Get error when checking out jsp file from cvs when Jdev is running in linux

I have JDev 9.0.3 andd CVS running in linux with same build version.
When I check out a project one jsp does not show up in the IDE but shows in the file folder correcly when I edit it thru vi.
I get this error when I try to edit in Jdev.
java.lang.NullPointerException
     at oracle.jdevimpl.webapp.html.HtmlSourceNode.reopen(HtmlSourceNode.java:159)
     at oracle.ide.model.TextNode.open(TextNode.java:150)
     at oracle.ide.model.TextNode.acquireTextBuffer(TextNode.java:375)
     at oracle.jdevimpl.webapp.html.HtmlSourceNode.getInputStream(HtmlSourceNode.java:239)
     at oracle.jdevimpl.webapp.editor.jsp.JspPreviewer.updateDocument(JspPreviewer.java:344)
     at oracle.jdevimpl.webapp.editor.jsp.JspPreviewer.open(JspPreviewer.java:161)
     at oracle.ideimpl.editor.EditorManagerImpl.openEditorInFrame(EditorManagerImpl.java:648)
     at oracle.ide.editor.EditorUtil.openExplicitEditorInFrame(EditorUtil.java:33)
     at oracle.ide.cmd.OpenEditorCommand.doit(OpenEditorCommand.java:45)
     at oracle.ide.CommandProcessor.invoke(CommandProcessor.java:363)
     at oracle.ide.CommandProcessor.invoke(CommandProcessor.java:115)
     at oracle.ideimpl.editor.EditorManagerImpl.handleEvent(EditorManagerImpl.java:1902)
     at oracle.ide.IdeAction$1.run(IdeAction.java:579)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:149)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:332)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:126)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:93)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:88)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:80)

Hi,
When you are starting service in OS, you are actually starting the maxdb instance service .
You can set it in auto mode so that you will not get this error. The OS service only establishes the connection to SAP.
As a part of CS install, from CSADMIN part it is just required to send the certificate successfully to OAC0.
Normally no activity is required to be done to under SICF from CS install point of view.
Anirudh,

Getting error while testing a outbound file in oracle B2B11g

Hi,
I am trying to configuare a outbound scenario in oracle B2B 11g.
I have created .ecs file and .xsd file and created a document type also and i am using generic file 1.0 as a lintening channel protocol and trying to read the input xml document from a perticular path.
I had setup partner and agreement also. everything is working fine and also file is succesfully polling from the source folder but i am getting error in B2B as :
B2B-50083
Error Description Machine Info: (infva0325) Description: Document protocol identification error.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Document protocol identification error.
Can anyone guide me how to resolve this error?
I had tried everything but of no use.
Please do reply me with your suggestions.

Hi Anuj,
Please find below xml data which will be saved as .txt file for outbound processing. Let me know if there are any changes i have to do. Please let me know if you need any further information. Listening channel is reading the file but in agreement level it is failing.
<?xml version="1.0" encoding="UTF-8"?><Transaction-DESADV XDataVersion="1.0" Standard="EDIFACT" Version="D93A" CreatedBy="ECXEngine_837" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" CreatedDate="2011-12-14T12:59:40" GUID="{2d323135-3336-3630-3232-313938393033}" xmlns="urn:oracle:integration:b2b:099C29D4C4ED419194917C20ADF8ABC3">
<Internal-Properties>
<Data-Structure Name="Interchange">
<Property Name="InterchangeSenderID">senderID</Property>
<Property Name="InterchangeSenderQual">senderQuali</Property>
<Property Name="InterchangeReceiverID">RecieverID</Property>
<Property Name="InterchangeReceiverQual">RecieverQuali</Property>
<Property Name="RepeatingSeparator"/>
<Property Name="InterchangeApplicationRef">DESADV</Property>
<Data-Structure Name="Transaction">
<Property Name="TransactionID">DESADV</Property>
<Property Name="TransactionControllingAgency"/>
<Property Name="TransactionMessageVersionNumber">D</Property>
<Property Name="TransactionMessageReleaseNumber">93A</Property>
<Property Name="TransactionAssociationAssignedCode"/>
</Data-Structure>
</Data-Structure>
</Internal-Properties>
<Segment-UNH>
<Element-0062>#ControlNumber#</Element-0062>
<Composite-S009>
<Element-0065>DESADV</Element-0065>
<Element-0052>D</Element-0052>
<Element-0054>93A</Element-0054>
<Element-0051>UN</Element-0051>
<Element-0057>EDIT30</Element-0057>
</Composite-S009>
</Segment-UNH>
<Segment-BGM>
<Composite-C002>
<Element-1001>351</Element-1001>
</Composite-C002>
<Element-1004>3364382</Element-1004>
</Segment-BGM>
<Segment-DTM>
<Composite-C507>
<Element-2005>137</Element-2005>
<Element-2380>20111214</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
<Loop-Group_2>
<Segment-NAD>
<Element-3035>SH</Element-3035>
<Composite-C082>
<Element-3039>7393142020009</Element-3039>
<Element-1131 xsi:nil="true"/>
<Element-3055>9</Element-3055>
</Composite-C082>
</Segment-NAD>
</Loop-Group_2>
<Loop-Group_2>
<Segment-NAD>
<Element-3035>CN</Element-3035>
<Composite-C082>
<Element-3039>7350056030012</Element-3039>
<Element-1131 xsi:nil="true"/>
<Element-3055>9</Element-3055>
</Composite-C082>
</Segment-NAD>
</Loop-Group_2>
<Loop-Group_10>
<Segment-CPS>
<Element-7164>1</Element-7164>
</Segment-CPS>
<Loop-Group_15>
<Segment-LIN>
<Element-1082>1</Element-1082>
<Element-1229 xsi:nil="true"/>
</Segment-LIN>
<Segment-PIA>
<Element-4347>5</Element-4347>
<Composite-C212_1>
<Element-7140>210587</Element-7140>
<Element-7143>BP</Element-7143>
</Composite-C212_1>
</Segment-PIA>
<Segment-QTY>
<Composite-C186>
<Element-6063>12</Element-6063>
<Element-6060>3</Element-6060>
</Composite-C186>
</Segment-QTY>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>PK</Element-1153>
<Element-1154>1</Element-1154>
</Composite-C506>
</Segment-RFF>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>VN</Element-1153>
<Element-1154>6152310</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>171</Element-2005>
<Element-2380>20111214</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_23>
<Segment-QVA>
<Composite-C279>
<Element-6064>0</Element-6064>
<Element-6063_1>83</Element-6063_1>
</Composite-C279>
<Element-4221>CP</Element-4221>
</Segment-QVA>
</Loop-Group_23>
</Loop-Group_15>
<Loop-Group_15>
<Segment-LIN>
<Element-1082>2</Element-1082>
<Element-1229 xsi:nil="true"/>
</Segment-LIN>
<Segment-PIA>
<Element-4347>5</Element-4347>
<Composite-C212_1>
<Element-7140>210510</Element-7140>
<Element-7143>BP</Element-7143>
</Composite-C212_1>
</Segment-PIA>
<Segment-QTY>
<Composite-C186>
<Element-6063>12</Element-6063>
<Element-6060>3</Element-6060>
</Composite-C186>
</Segment-QTY>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>PK</Element-1153>
<Element-1154>1</Element-1154>
</Composite-C506>
</Segment-RFF>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>VN</Element-1153>
<Element-1154>6152310</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>171</Element-2005>
<Element-2380>20111214</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_23>
<Segment-QVA>
<Composite-C279>
<Element-6064>0</Element-6064>
<Element-6063_1>83</Element-6063_1>
</Composite-C279>
<Element-4221>CP</Element-4221>
</Segment-QVA>
</Loop-Group_23>
</Loop-Group_15>
<Loop-Group_15>
<Segment-LIN>
<Element-1082>3</Element-1082>
<Element-1229 xsi:nil="true"/>
</Segment-LIN>
<Segment-PIA>
<Element-4347>5</Element-4347>
<Composite-C212_1>
<Element-7140>081349</Element-7140>
<Element-7143>BP</Element-7143>
</Composite-C212_1>
</Segment-PIA>
<Segment-QTY>
<Composite-C186>
<Element-6063>12</Element-6063>
<Element-6060>1</Element-6060>
</Composite-C186>
</Segment-QTY>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>PK</Element-1153>
<Element-1154>2</Element-1154>
</Composite-C506>
</Segment-RFF>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>VN</Element-1153>
<Element-1154>6152310</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>171</Element-2005>
<Element-2380>20111214</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>NB</Element-1153>
<Element-1154>JF074</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>21E</Element-2005>
<Element-2380>20160905</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_23>
<Segment-QVA>
<Composite-C279>
<Element-6064>0</Element-6064>
<Element-6063_1>83</Element-6063_1>
</Composite-C279>
<Element-4221>CP</Element-4221>
</Segment-QVA>
</Loop-Group_23>
</Loop-Group_15>
<Loop-Group_15>
<Segment-LIN>
<Element-1082>4</Element-1082>
<Element-1229 xsi:nil="true"/>
</Segment-LIN>
<Segment-PIA>
<Element-4347>5</Element-4347>
<Composite-C212_1>
<Element-7140>051596</Element-7140>
<Element-7143>BP</Element-7143>
</Composite-C212_1>
</Segment-PIA>
<Segment-QTY>
<Composite-C186>
<Element-6063>12</Element-6063>
<Element-6060>1</Element-6060>
</Composite-C186>
</Segment-QTY>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>PK</Element-1153>
<Element-1154>2</Element-1154>
</Composite-C506>
</Segment-RFF>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>VN</Element-1153>
<Element-1154>6152310</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>171</Element-2005>
<Element-2380>20111214</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_16>
<Segment-RFF>
<Composite-C506>
<Element-1153>NB</Element-1153>
<Element-1154>116812505</Element-1154>
</Composite-C506>
</Segment-RFF>
<Segment-DTM>
<Composite-C507>
<Element-2005>21E</Element-2005>
<Element-2380>20150131</Element-2380>
<Element-2379>102</Element-2379>
</Composite-C507>
</Segment-DTM>
</Loop-Group_16>
<Loop-Group_23>
<Segment-QVA>
<Composite-C279>
<Element-6064>0</Element-6064>
<Element-6063_1>83</Element-6063_1>
</Composite-C279>
<Element-4221>CP</Element-4221>
</Segment-QVA>
</Loop-Group_23>
</Loop-Group_15>
</Loop-Group_10>
<Segment-CNT>
<Composite-C270>
<Element-6069>2</Element-6069>
<Element-6066>4</Element-6066>
</Composite-C270>
</Segment-CNT>
<Segment-UNT>
<Element-0074>#SegmentCount#</Element-0074>
<Element-0062>#ControlNumber#</Element-0062>
</Segment-UNT>
</Transaction-DESADV>

Getting error when running the jar file..

Hi All,
I am new to executing jar file..Actually i have one class which contains the following code.
import com.documentum.fc.client.DfClient;
import com.documentum.fc.client.IDfClient;
import com.documentum.fc.client.IDfSession;
import com.documentum.fc.client.IDfSessionManager;
import com.documentum.fc.common.DfLoginInfo;
import com.documentum.fc.common.IDfLoginInfo;
import com.documentum.fc.common.DfException;
import com.fidelity.ftg.ereviewg2.migration.util.MigrationResource;
* This class is used for creating docbase connection
* *@type* DocbaseConnection
* *@author* a405304
* *@see*
public *class *DocbaseConnection {
//public static ResourceBundle resource;
IDfSessionManager sMgr = *null*;
IDfSession session = *null*;
String docbaseName;
*private* *static* DocbaseConnection +docbaseCon+;
* Constructor for DocbaseConnection
* *@throws* DfException
* *@throws* Exception
*private* DocbaseConnection()*throws* DfException, Exception{
//ResourceBundle bundle = ResourceBundle.getBundle(Constants.RESOURCE_PATH,Locale.getDefault());
MigrationResource bundle = MigrationResource.+getBundle+();
String userId = bundle.getString("DOCBASE_USERID");
String password = bundle.getString("DOCBASE_PASSWORD");
docbaseName = bundle.getString("DOCBASE_NAME");
IDfClient client = DfClient.+getLocalClient+();
sMgr = client.newSessionManager();
IDfLoginInfo loginInfo = *new* DfLoginInfo();
loginInfo.setUser( userId );
loginInfo.setPassword( password );
loginInfo.setDomain("");
sMgr.setIdentity( docbaseName, loginInfo );
session= sMgr.getSession( docbaseName );
System.+out+.println("# Connected to Docbase: "+session);
}Now i create the jar file whose name is docbaseconnection.jar
Now when i am running this jar file by using the following command then i am getting the following error..
C:\JAR_FILES>java -jar docbaseconnection.jar
Exception in thread "main" java.lang.NoClassDefFoundError: com/documentum/fc/client/DfQuery
For running this docbaseconnection.jar file i need the following thing in classpath...
C:\Program Files\Documentum\dctm.jar;C:\Program Files\Documentum\Shared\dfc.jar;C:\Program Files\Documentum\Shared\log4j.jar
I already add this jar files in the classpath of environment variables..Then also i am getting the same error..
Kindly help me...........

Well, let´s supose your manifest is defined as I did in my previous post. So, your directory base should be something like:
C:\dir
docbaseconnection.jar
dctm.jar
dfc.jar
anotherlibraries.jar
But, let´s supose you want something like
C:\dir
docbaseconnection.jar
lib (folder, which contains dctm.jar, dfc.jar, etc)
Then you should change the class-path of your manifest to
Class-Path: ./lib/dctm.jar ./lib/dfc.jar
That´s what I meant

Getting error when testing the webservice in webservice navigator

hello experts,
i created the rfc for to delete the calender appointments it was working fine and i created the webservice for this . when i'm trying to test the webservice with ws navigator i can insert the values on request screen , but result is this error.
webservice response :
HTTP/1.1 200 OK
Set-Cookie: <value is hidden>
content-type: text/xml; charset=utf-8
content-length: 481
sap-srt_id: 20110721/115816/v1.00_final_6.40/D40C9E37E8642547AA79FB54A42976E7
server: SAP Web Application Server (1.0;700)
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"><soap-env:Body><n0:YAPPT_DELETE_N_T2Response xmlns:n0="urn:sap-com:document:sap:rfc:functions"><ERROR_MSG><MSG_ID>BC</MSG_ID><MSG_TYPE>E</MSG_TYPE><MSG_NUMBER>020</MSG_NUMBER><MSG_VAR1>D</MSG_VAR1><MSG_VAR2></MSG_VAR2><MSG_VAR3></MSG_VAR3><MSG_VAR4></MSG_VAR4><FIELDNAME>MAINT_INDI</FIELDNAME><TABLEINDEX>000001</TABLEINDEX></ERROR_MSG></n0:YAPPT_DELETE_N_T2Response></soap-env:Body></soap-env:Envelope>
can anybody guide me how to rectify this problem .help will be greately appreciated.
thanks for coming help
regards,
sashi.

hello madhu,
i have got the sollution. in the webservice i'm giving the input (03D86AFB7EE7D14585EF515C59B5F559) same as in data base .while testing the webservice internally the value should be converted into bytes bcoz in the domain the data type was RAW .
so db didnt recognise that value thats why i got the error.
so i use the fm GUID_CONVERT and convert that as db format
thanks for ur response .
regards,
sashi.

Getting error when try to upload xml file into Data Template

Hi,
Getting error when try to upload xml file into Data Template.error:"The uploaded file XXSLARPT.xml is invalid. The file should be in XML-DATA-TEMPLATE format."Plz anybody help me.
Thanks,
Prasad.

Hi,
Anybody Help Plzzzzzz.
thx,
Prasad

I'm getting a 9041 error when trying to convert files to AAC -- any ideas on how to fix it? the files files in iTunes show up as Apple Lossless but i can't put them on my iPod

i'm getting a 9041 error when trying to convert files to AAC -- any ideas on how to fix it? the files files in iTunes show up as Apple Lossless but i can't put them on my iPod

"I have been able to convert to AAC by first converting to AIFF and then to AAC. This is a pan though."
this worked for me.
thanks.

I get an error when I try downloading files - 8520 Curve

I get an error when I try downloading files with my 8520 curve...and they say must contact my webmaster

Hello !
Could you please be more elaborative for explaining your issue?

Get error when installing .json back up file A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script

get error when installing .json back up file A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script
Also tried to chang places.sql or what ever to my back up .json file and that wouldnt work. Is there a way to just move my backup .json file some where my bookmarks are a bigger file and i t will take a bit to upload.

A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script in the debugger, or let the script continue.
Script: chrome://browser/content/places/editBookmarkOverlay.js:909

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version. Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?

Having the same problem in CS6. I can tell you that converting back to CS4 will NOT solve the problem. It seems when support for backward compatibility is discontinued, there's just no way to get
any help at all? Absolute failure to provide any user support so far...

Getting an error when testing the payment flow. Can you please help me?

I'm getting this when testing a payment flow:
What do do?
Thanks in advance, Diego.

The form is corrupt. This is usually caused by
a) You mess up the code trying to adjust the design.
b) You change things in the form cause it to change ID. Be aware of that the form code can change when you use the form-builder. You need to update this manually if you change things in the form causing it to change ID or names for fields.
c) You have deleted the form in the form builder.

Error When connecting proxy

Hi,
When I try to connect proxy in application, it is not connecting instead when I check whether it is going through proxy or not it is telling that it is establishing direct connection only. Here I have posted part of the coding. Please If any error give me a hint.
            System.setProperty("ProxySet", "true");
            SocketAddress addr = new InetSocketAddress("webcache.mydomain.com",80);
            proxy=new Proxy(Proxy.Type.HTTP,addr);here in this code part I am checking whether is connecting with proxy or not.
URL u = new URL(url);
URLConnection uu=u.openConnection(ScrapperInterface.proxy);
try
                URI uuu = uu.getURL().toURI();
                List l=ProxySelector.getDefault().select(uuu);
                for (Iterator iter = l.iterator(); iter.hasNext(); )
                     Proxy proxy = (Proxy) iter.next();
                     System.out.println("proxy hostname : " +proxy.type());
                     InetSocketAddress add = (InetSocketAddress)proxy.address();
                     if(add == null)
                         System.out.println("No Proxy");
                     else
                         System.out.println("proxy hostname : " +add.getHostName());
                         System.out.println("proxy port : " +add.getPort());
catch (URISyntaxException ex)
                Logger.getLogger(StartThread.class.getName()).log(Level.SEVERE, null, ex);
}Output is:
proxy hostname : DIRECT
No Proxy

Re: Error When connecting proxy You didn't get any error when you created the connection. Your title is misleading. Probably you are misleading yourself - see below.
System.setProperty("ProxySet", "true");That does nothing. There is no such property, contrary to widespread belief.
SocketAddress addr = new InetSocketAddress("webcache.mydomain.com",80);
proxy=new Proxy(Proxy.Type.HTTP,addr);... and using java.net.Proxy has nothing to do with system properties in any case.
URLConnection uu=u.openConnection(ScrapperInterface.proxy);Here you are opening a URLConnection via the proxy. As you got output from the code further down it is clear that this step must have succeeded. So all the code below is pointless.
URI uuu = uu.getURL().toURI();Here you are getting the URI you created the connection for.
List l=ProxySelector.getDefault().select(uuu);Here you are getting the Proxies the default ProxySelector would have given you for that URI. Nothing to do with the URLConnection you created, and nothing to do with the Proxy you created either.
InetSocketAddress add = (InetSocketAddress)proxy.address();So here you are testing the proxy address for the system's default proxy for that URI. Again, nothing to do with what you did above.
What you should be doing here is using the URLConnection you have already created. Not testing an address.

Getting error when testing Proxy to File interface

Similar Messages

Maybe you are looking for