Proxy to Proxy Scenario with sender and receiver on same instance

Hi,
I have a scenario to integrate Erecruit to HR system usng standard content. Both the Erecruiting and HR are on same instance so my sender and receiver is the same system. Standard ABAP proxies are provided.
Now I need some help in how to configure the channels and the agreements as both the sender and receiver are on same instance. Do i need to use parties?
do i have to create a sender communication channel?
Please let me know the stps required in configuration for this scenario.
Thanks in advance.

Hey
It does not matter if your sender and receiver are same system or different systems,the configuration steps will be the same.
In your case you would need
1 Receiver determination
1 interface determination
1 receiver agreement
1 receiver communication channel(of type XI adapter,this will connect to HR system).
No party or sender communication channel or sender agreement are required.
You need to have configured 1 business system for HR system in SLD though.
Thanx
Aamir
Edited by: Aamir Suhail on Jul 23, 2008 7:36 PM

Similar Messages

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

Problem with sending and receiving e-mail through exchange [GMail]

Hello I have problem with sending and receiving e-mail.
all is well set, username and password are correct, the server set m.google.com. verification of data is about like stepping into a post and want to check the post office gives me an error message: Can not Get Mail. The connection to the server has failed
I have this problem on my two iPhone

http://www.zdnet.com/google-drops-exchange-activesync-support-for-free-email-acc ounts-7000008836/

Hello! Im having problems about my Iphone showing NO SERVICE on top. Im not able to send and receive msg, same with calls

Hello Guys! I hope someone could help me, Im having trouble with my phone's signal, I am not able to send and receive msgs, same as make calls and receive calls. At first, my phone is working fine (iphone 4, iOS 7.0.4) and all of a sudden, my text messages are not getting through, and I noticed that my phone shows NO SERVICE, I refreshed the phone by turning it off and turning it on after a couple of minutes, it worked. My phone is okay again after that, Im able to send and receive messages again. But after few hours, the problem came again. NO SERVICE sign is displayed again, but this time after refreshing the phone nothing good happened. I tried almost every possible thing I can to fix it but it doesn't work. What should I do.
Thank you

Hey Clara,
These are the recommended troubleshooting steps to resolve No Service issues on iPhone:
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Turn iPhone off and then on again.
Remove the SIM card and verify that it's a valid, carrier-manufactured SIM. Also verify that it isn't damaged, worn, or modified. Then reinsert it.
Check for a carrier-settings update. Connect to a Wi-Fi network. Then tap Settings > General > About. If an update is available, iOS will ask you if you want to install it. If Wi-Fi isn't available, connect your device to iTunes.
Update your iPhone to the latest version of iOS.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Restore the iPhone.
If you are outside the United States, please also follow these steps:
Go to Settings > Carrier > Automatic.
If the phone registers any carrier network, Settings > Carrier will be present.
If the Carrier option is missing in Settings and you are outside of the Unites States, please contact Apple for support and service options.
Set the option for Automatic to off.
A list of potentially available carriers appears after about two minutes. If the device is locked to a carrier, it may connect only to the carrier network to which it is locked. If the device displays carrier networks, then the device is working as expected.
Set Settings > Carrier > Automatic back to on.
If you're still experiencing No Service issues, contact your carrier to check for any network or account issues that could cause these symptoms.
from: iPhone: Troubleshooting No Service
http://support.apple.com/kb/TS4429
Welcome to Apple Support Communities!
Take care,
Delgadoh

SOAP Scenario-Sender and receiver having same structure- Mapping Required?

Hi,
We are having a SOAP to SOAP scenario. In that the sender and receiver are having same structure. Is it possible to by-pass mapping and just do the configuration from ID
Thanks and regards,
Siji Anup

Hi Siji,
AFAIK you can skip ESR development. Check the example in this blog When and how to create an scenario in SAP PI without mapping objects.
Regards.

Can 2 people in different locations at the same time import, access, send, and receive the same messages from the same email account

I import messages into Thunderbird. I send and receive emails. One of the things I like about Thunderbird is that I can insert (image, link, etc) right where I want to, and I can Attach. But not just a simple attach file. No, I can also click Attach and choose Webpage. A lot of web-based emails are plain, simple, no frills - Attach file and that's it.
So I need to have my client be able to do the same thing I do when sending out emails, Namely sending out emails with an Electronic Press Kit (EPK) attached - which is to say, a webpage (not a pdf in our case). So, I need her to download, install, and use Thunderbird.
Here's the problem and my question. She needs to access, send, and receive from my email account. That would be easy if it was simple attach files - she could just login on the web, go to squirrel mail and bang it out.. Here it is: She needs to be able to import the messages to be able to reply to some messages - she needs access to what I have access to. She needs to use Thunderbird so she can take advantage of the features like insert image with link or attaching a webpage. My question is how will this affect my use? Can 2 people simultaneously and from different locations access and use the same email account or is it a case where her importing the emails would cut me off..Is it an either or thing? Basically, can her and I both import the emails or can they only be imported to one location at a time. Because every time someone sends me an email i get it right there on my Thunderbird application..it's imported to my Thunderbird..I want her and I to be able to do that without affecting each other. I don't want her to start importing to her desktop and then I can no longer import. If she says "point those messages to my computer what will happen to my ability to access them on my computer in the same manner I am currently?

I think there is a contradiction in your requirements. You want two people to share an account and you don't want either to interfere with the other.
The short and simple answer is to use IMAP to connect to the mail server. If your current email provider doesn't offer IMAP, find another that does. This is old technology already and it's disgraceful that some email providers haven't yet put it in place.
IMAP means that your messages are stored on the server and both of you will see exactly the same set of messages. And therein lies the contradiction; you will both see changes made by the other so you are inherently interfering with one another.
Caveats: some providers may not permit you both to access the account concurrently, and even if they do, things may become interesting if you both choose to work on the same message simultaneously.
Note that all of this is about email servers and protocols; your choice of Thunderbird as your email client has little bearing on the situation.

Proxy to SOAP scenario-With Attachment and Mapping

I have a scenario to be developed, it is a Proxy to SOAP sceanrio.
There are about 8 fields coming from Proxy.
Can we create an attachment from these fields.
Also we have to do a mapping of this attachment to a field in the target External Defination and also 2 fields of the 8 have to mapped to the other respective fields of the external defination.
All this has to be posted on a webservice through SOAP with
the 2 fields in payload and
the attachment in the attachemnt section of the message
Could this be achieved?

In ABAP proxy you create a message with the two fields which you need for main SOAP message.
The attachment is created exactly how it is requested from web service.
You create a String with the XML (including tags) and do a codepage conversion to UTF-8 (or whatever is requested)
Note: The payload is created in UTF-8 automatically, the attachment is treated as binary.
You can also use a Java mapping for creating the attachment, if you have good Java skills, but I recommend to use program code for one purpose only on one place.

Can't send and receive SMS/MMS/iMessages after restoring iPhone from a backup

I can't receive and send any type of messages with my iPhone 3GS (iOS 6.1.6) after restoring it from my old backup (also 6.1.6).
Messages that I'm sending are disappearing immediately after the moment they are sent and they are never delivered. The first time I restored my iPhone I could send and receive messages for 1 day, and I couldn't do it on the next day. This time I was able to send and receive messages for 10 minutes.
I have used the methods Apple recommends for problems like this, but it doesn't help.

Hello StepanyanMuradyan,
Thanks for using Apple Support Communities.
To troubleshoot issues with not being able to send or receive messages on your iPhone, I'd like you to please follow the troubleshooting outlined below.
To resolve issues with sending and receiving iMessages, follow these steps
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
iOS: Troubleshooting Messages - Apple Support
Take care,
Alex H.

I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this?

I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this? I have shut down my phone, but still no luck!

iMessage and FaceTime went down yesterday for some people. Mine is still down. My iMessage is saying the same thing about being activated. Sounds like you are still down too. Ignore the status page that says everything is fine - it lies.

I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.

I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

TS2755 Me and my wife r sharing the same Apple ID, with the conversion IOS7 all of a sudden my wife can read all my sended and received iMessages! What t.f is going on? I tried all kind of things, pls help

Gentlemen,
Me and my wife r sharing the same Apple ID, with the conversion to IOS7 all of the sended and received iMessages on my phone comes in also on my wife's phone! Tried all kind of things, pls help
Marco

Are you both using the same Apple ID?
What do you have here:
Settings > Phone > My Number > ?

BizTalkServer 2010 SFTP Adapter from CodePlex - Configuring send and receive locations with SSH public and private keys

Hi there,
I am looking for step by step instrcutions on how to configure SFTP Codeplex adapter for both receive and send ports.
Out business partner with whom we push/poll the files from wants us to use SSH encryption/decryption etc.
Just wondering if the following functionality is supported in Codeplex SFTP adatper without having to write any code.
Appreciate if there is manaul to do this for SFTP. BTW I do have all the our public and private keys and business partners Public key for configuring.
For Send port: 1. we would need to encrypt the file with our business partners public key
                      2. sign the file with our private key.
                      3. Send the file through to SSH client which eventually transfers to Remote server.
Receive port:   1. Connect to SSH Server with SSH-2 key and receive the file
                      2. Verify the file's digital signature agaisnt the Business partners PGP public key
                      3. Decrypt the file using our PGP Public key
Thanks in advance

Yes it is supported.
You can find its documentation in this link
You can find section X.509 Certificate Identity Keys
You can set public and private key in property SSH Identity thumbprint of send and receive port
I prefer to test it using client tool like
FileZilla or WinSCP then test it using sftp adapter
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

How do I send and receive email with my @me email account

I want to drop yahoo as my email provider, so how do I send and receive email using my @me account. Using yahoo, you go to yahoo, then mail and your good to go. I'm not a tech expert and fairly new to apple products and would like the improved security of an apple address.

Hi stephraerae,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Adding an email account
http://support.apple.com/kb/ht4810
iCloud is one of the options you can choose for your email provider.
iCloud: Set up iCloud Mail on your devices
http://support.apple.com/kb/PH2621
This article includes the specific iCloud server settings:
iCloud: Mail server information
http://support.apple.com/kb/HT4864
Hope that helps ...
- Judy

I am getting a "not delivered" when I try to send a photo from my Ipad or iPhone via iMessage. I can receive photos in iMessage and I can send and receive photos other than with iMessage. I have tried restoring factory settings etc but no luck.

I am getting a "not delivered" when I try to send a photo from my Ipad or iPhone via iMessage. I can receive photos in iMessage and I can send and receive photos other than with iMessage. I have tried restoring factory settings etc but no luck. Is anyone else having this problem please?

I've been having this problem too, but here's the catch: originally it was only with my dad, and only sometimes. Now it's dad and husband, every time! Pix go through, via imessage, to everyone else, and they go through to dad/husband if I "send as text" after it fails.
And the other annoying thing- the blue bar will run all the way, and it will say "delivered". So I close out of imessage. When I reopen it again, the "delivered" has changed to "not delivered" with the red exclamation point. I just googled "imessage not sending photos" and founds TONS of people with the same problem, but no solutions. (I have rebooted phone, reset network settings, with no luck. I even had to backup/delete/restore my whole phone the other day for a different reason, and hoped that would fix it, but now it won't send to my dad OR my husband (who is on not just the same carrier, but the same family plan as me)

I'm unable to send and receive email through Apple Mail 4. I've checked my settings on Preferences, and my password to Gmail is up to date for syncing with IMAP, but it still won't connect. Suggestions?

I'm unable to send and receive email through Apple Mail 4. I've checked my settings on Preferences, and my password to Gmail is up to date for syncing with IMAP, but it still won't connect. Suggestions?

I think it's trying to open it in a gMail eMail & is losing your gMail password that it needs log into gMail, but not 100% positive.
Have you tried Right clicking or Control+click on the eMail link & choose Copy? Works on some, not others.

Proxy to Proxy Scenario with sender and receiver on same instance

Similar Messages

Maybe you are looking for