BizTalkServer 2010 SFTP Adapter from CodePlex - Configuring send and receive locations with SSH public and private keys
Hi there,
I am looking for step by step instrcutions on how to configure SFTP Codeplex adapter for both receive and send ports.
Out business partner with whom we push/poll the files from wants us to use SSH encryption/decryption etc.
Just wondering if the following functionality is supported in Codeplex SFTP adatper without having to write any code.
Appreciate if there is manaul to do this for SFTP. BTW I do have all the our public and private keys and business partners Public key for configuring.
For Send port: 1. we would need to encrypt the file with our business partners public key
2. sign the file with our private key.
3. Send the file through to SSH client which eventually transfers to Remote server.
Receive port: 1. Connect to SSH Server with SSH-2 key and receive the file
2. Verify the file's digital signature agaisnt the Business partners PGP public key
3. Decrypt the file using our PGP Public key
Thanks in advance
Yes it is supported.
You can find its documentation in this link
You can find section X.509 Certificate Identity Keys
You can set public and private key in property SSH Identity thumbprint of send and receive port
I prefer to test it using client tool like
FileZilla or WinSCP then test it using sftp adapter
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer
Similar Messages
-
i put a new vodaphone sim into an iphone and all is great except i cannot send or receive photos with my texts
Have you tried contacting Vodafone to make sure MMS messaging is enabled on your account?
-
The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location
Could anyone please help in resolving the following
error:
Server Error in '/BizTalkXXXMyAppWcfService' Application.
The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc".
Please verify that the receive location exists.
It does exist: When I go to All Artifacts >> Receive Locations I can see: WcfService_BizTalkXXXMyAppWcfService/XXXMyApp
Also it is Enabled, green, up and running.
…and that the isolated adapter runs under an account that has access to the BizTalk databases. – Checked, the BizTalkUser has all the permissions to access BizTalk databases.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc". Please verify that the receive
location exists, and that the isolated adapter runs under an account that has access to the BizTalk databases.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0xc0c01666): The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc". Please verify that the receive location exists, and that the isolated
adapter runs under an account that has access to the BizTalk databases. ]
Microsoft.BizTalk.TransportProxy.Interop.IBTTransportProxy.RegisterIsolatedReceiver(String url, IBTTransportConfig callback) +0
Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfIsolatedReceiver`2.RegisterIsolatedReceiver(Uri uri) +318
[AdapterException: Failed to register isolated receiver for address "/BizTalkXXXMyAppWcfService/XXXMyApp.svc"; receive location does not exist or is disabled.]
Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfIsolatedReceiver`2.RegisterIsolatedReceiver(Uri uri) +875
Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHostFactory`3.CreateServiceHost(String constructorString, Uri[] baseAddresses) +363
System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath) +1423
System.ServiceModel.HostingManager.ActivateService(String normalizedVirtualPath) +50
System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) +1132
[ServiceActivationException: The service '/BizTalkXXXMyAppWcfService/XXXMyApp.svc' cannot be activated due to an exception during compilation. The exception message is: Failed to register isolated receiver for address "/BizTalkXXXMyAppWcfService/XXXMyApp.svc";
receive location does not exist or is disabled..]
System.Runtime.AsyncResult.End(IAsyncResult result) +890624
System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +180062
System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +107Hi,
This seems to be a permission issue.
Makesure account used in the application pool is a member of the BizTalk Isolated Host Users group.
Also its working considering either make the ASPNET user account a member of your BizTalk Isolated Host Users group to make sure it has access to the biztalk databases (or change the asp.net services to run under a different account, which would need
to be done from the framework's core .config files)
Regards
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful. -
I bought an HTC one 2/28/14. I had no trouble sending or receiving pictures with my texts. I had to update my phone 6/5/14 and since that time I cannot send or receive pictures in my texts. How can I fix that?
The thing is, before the update, I ALWAYS had my wifi on, and I had my mobile data off. Worked flawlessly until the update.
Verizon Wireless Customer Support <[email protected]> wrote:
Verizon Wireless Customer Support created the discussion
"I bought an HTC one 2/28/14. I had no trouble sending or receiving pictures with my texts. I had to update my phone 6/5/14 and since that time I cannot send or receive pictures in my texts. How can I fix that?"
To view the discussion, visit: https://community.verizonwireless.com/message/1098171#1098171
> -
I'm not sure when it happened but I can't send or receive macmail with my matchbook any more it works fine on my iPad I have version 10.8.2 rnin the mackbook. This just started out of the blue.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os
http://www.apple.com/support/macbookpro
This is helpful Mail Setup Wizard:
http://www.apple.com/support/mail
This, is not forum for notebook owners.
I would post in Mountain Lion : Mail -
BizTalk 2013 SFTP Adapter : Host Instance configured for SFTP Receive cause high CPU usage
Hi,
Our BizTalk 2013 Server test env have 16 GB RAM. We have one SFTP Receive Location which is using a dedicated Host instance for SFTP receive.
As soon as we start this SFTP Host Instance it starts consuming 50-60% CPU. (Even when it is not handling any file receive)
As suggested in below thread, to fix this issue, we changed the SFTP RL default configuration. i.e. Changed polling interval from default 0 sec to
10 minutes and also changed the RL Schedule window to business hours only.
https://connectedpawns.wordpress.com/2014/04/13/biztalk-2013-sftp-adapter-biztalk-host-receiving-throttled-because-processmemory-exceeded-the-configured-throttling-limit/#comment-2602
Even after changing the RL configuration , the Host Instance continuously consumes ~60% CPU.
Any suggestions to troubleshoot more on this issue ?
Thanks in advance !!
AnoopThis is one of the issue which has already been raised to Microsoft and hopefully a public build will be available soon in next cumulative update pack .
There are variety of reason for this starting for password mismatch or password not given , SFTP adapter unable to connect and so on .
There is good post here in below link for this issue
http://thoughtsofmarcus.blogspot.co.uk/2013/06/leaving-password-blank-in-biztalk-2013.html
Another greate artcicle is by Nino which states these issues .SFTP adapter is protocol sensitive and some configuration by server side, can cause a lot of crazy situations
http://ninocrudele.me/2014/01/29/checkstat-and-sftp-adapter-issues/
Thanks
Abhishek -
Exchange 2010 can't send or receive email with attachments.
Hello,
We have an Exchange 2010 server, running under Windows 2008R2. Both the server and Exchange are current for Windows and Exchange updates. Exchange is on SP3 installed about a month ago with no errors reported in the event logs.
The problem is that attachments over about 1 MB do not send or receive and no error message is returned. If I send an email message with a 3 MB attachment to myself, it reports as sent in Outlook. On the Exchange server the message queue shows nothing in
the queue. I try to use Exchange mail flow tracking tool and it hangs when selecting “messages received from” option. I gave up waiting after 5 minutes for the display to populate.
As the server is set attachments should be able to send and receive up to 20 MB.
I checked and verified all settings I could find related to this. I checked with the Exchange Management Console per the following article:
http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/managing-limits-exchange-server-2010-part1.html
I also checked using the Exchange Power Shell using the following article:
http://eightwone.com/2010/09/29/exchange-message-size-limits/
Both show that all settings are suitable. Details are below
I would appreciate feedback on this problem.
Thank you!
Details from the articles noted above:
First test was to attach a 3 mb text file in Outlook sent from my in house account to my in house account. After 5 minutes the test message was not received nor was there an error message returned.
Checked The Exchange server mail queue and there was nothing in the queue. Checked the Exchange mail flow tracking tool and it hung when selecting “messages received from” option.
Reviewed and verified settings per the following 2 articles:
Article #1
http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/managing-limits-exchange-server-2010-part1.html
Organization Configuration>Hub Transport>General Settings>Global Settings>Transport Settings set to max receive size (KB) = 20480
Settings set to max send size (KB) = 20480
Organization Configuration> Hub Transport> Send Connectors tab.
Maximum message size (KB) set to 20480
Exchange Management Console> Server Configuration> Hub Transport> and then on the right side, select the desired server.
A list of all Receive Connectors will be shown below
There are 3 receive Connectors
#1) named Client XXXXXXXXXX
Maximum message size (KB) set to 20480
#2) named Default XXXXXXXXXX
Maximum message size (KB) set to 20480
#3) named relay
Maximum message size (KB) set to 20480
Use Exchange Management Shell to check settings
#1) Get-ADSite
Returns:
Name HubSiteEnabled
Default-First-Site-Name False
#2) Get-ADSiteLink
Name ADCost ExchangeCost Sites
DEFAULTIPSITELINK 100 {xxxx.local/Configuration/Si...
#3) Get-ADSiteLink | select Max*
MaxMessageSize
unlimited
Exchange Management Console>Expand Organization Configuration>Click on Hub Transport item>Click on Transport Rules tab
No rules
Article #2
http://eightwone.com/2010/09/29/exchange-message-size-limits/
COMMAND: Get –TransportConfig
results:
ClearCategories : True
ConvertDisclaimerWrapperToEml : False
DSNConversionMode : UseExchangeDSNs
ExternalDelayDsnEnabled : True
ExternalDsnDefaultLanguage :
ExternalDsnLanguageDetectionEnabled : True
ExternalDsnMaxMessageAttachSize : 10 MB (10,485,760 bytes)
ExternalDsnReportingAuthority :
ExternalDsnSendHtml : True
ExternalPostmasterAddress :
GenerateCopyOfDSNFor : {}
HygieneSuite : Standard
InternalDelayDsnEnabled : True
InternalDsnDefaultLanguage :
InternalDsnLanguageDetectionEnabled : True
InternalDsnMaxMessageAttachSize : 10 MB (10,485,760 bytes)
InternalDsnReportingAuthority :
InternalDsnSendHtml : True
InternalSMTPServers : {}
JournalingReportNdrTo : <>
LegacyJournalingMigrationEnabled : False
MaxDumpsterSizePerDatabase : 18 MB (18,874,368 bytes)
MaxDumpsterTime : 7.00:00:00
MaxReceiveSize : 20 MB (20,971,520 bytes)
MaxRecipientEnvelopeLimit : 500
MaxSendSize : 20 MB (20,971,520 bytes)
MigrationEnabled : False
OpenDomainRoutingEnabled : False
Rfc2231EncodingEnabled : False
ShadowHeartbeatRetryCount : 12
ShadowHeartbeatTimeoutInterval : 00:15:00
ShadowMessageAutoDiscardInterval : 2.00:00:00
ShadowRedundancyEnabled : True
SupervisionTags : {Reject, Allow}
TLSReceiveDomainSecureList : {}
TLSSendDomainSecureList : {}
VerifySecureSubmitEnabled : False
VoicemailJournalingEnabled : True
HeaderPromotionModeSetting : NoCreate
Xexch50Enabled : True
COMMAND:
Set-TransportConfig –MaxReceiveSize 20MB –MaxSendSize 20MB
C:\Windows\system32>Set-TransportConfig -MaxReceiveSize 20MB -MaxSendSize 20MB
WARNING: The command completed successfully but no settings of 'Transport Settings' have been modified.
COMMAND:
Get-SendConnector
Identity AddressSpaces
Enabled
Internet {SMTP:*;1}
True
COMMAND:
Set-SendConnector -Identity Internet -MaxMessageSize 20MB
WARNING: The command completed successfully but no settings of 'Internet' have been modified.
COMMAND:
Get-ReceiveConnector
Identity Bindings Enabled
XXXXXXXXXX\Default XXXXXXXXXX {0.0.0.0:25}
True
XXXXXXXXXX \Client XXXXXXXXXX {:::587, 0.0.0.0:587} True
XXXXXXXXXX \relay {0.0.0.0:25}
True
COMMAND:
Get-ReceiveConnector | fl Identity,MaxMessageSize
Identity : XXXXXXXXXX \Default XXXXXXXXXX
MaxMessageSize : 20 MB (20,971,520 bytes)
Identity : XXXXXXXXXX \Client XXXXXXXXXX
MaxMessageSize : 20 MB (20,971,520 bytes)
Identity : XXXXXXXXXX \relay
MaxMessageSize : 20 MB (20,971,520 bytes)
COMMAND:
Get-AdSiteLink | fl Name,*max*
Name : DEFAULTIPSITELINK
MaxMessageSize : unlimited
COMMAND:
Get-RoutingGroupConnector <ConnectorID> | FL Name, *Max*
No routing group connectors are installed
Individual
Recipient Configuration > Mailbox>Properties of the User> Activate tab Mail Flow Settings> Properties>Message Size Restrictions settings:
Set to 20480 for send and receive for all.
Re-tested and had the same problem.
Post on Technet.ExchangeITPro,
Thank you for your reply.
>what SP are you at?
As noted in the first paragraph: "We have an Exchange 2010 server, running under Windows 2008R2. Both
the server and Exchange are current for Windows and Exchange updates. Exchange is on SP3 installed about a month ago with no errors reported in the event logs."
>try restarting the transport services.
Done previously as well as the entire server. No change. -
I wany to change to Firefox from IE8 to send and receive mails, how do I do this?
I havw to use IE8 to access one program but I would like to send and receive my emails using Firefox. How do I make this change ?
See:
* https://support.mozilla.org/en-US/kb/How%20to%20make%20Firefox%20the%20default%20browser
also Firefox 9 is here
* getfirefox.com -
How do I get iPad to send and receive messages. It did a while ago and now nothing
since it was working, your wii-fi or internet access must be down
-
TS2755 I'm not able to send or receive texts with certain people (non iphone users)
Does anyone know why I can't seem to send or receive texts to certain devices (non iphone devices)?
Hi, plusbelleange.
Thank you for visiting Apple Support Communities.
I understand that you are experiencing an issue with sending and receive Messages from certain people. Here is a helpful troubleshooting resource that I would recommend going through. You may need to process these steps on all devices experiencing this issue.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Cheers,
Jason H. -
Cant send or receive emails with my nokia 300
my email is with slingshot so i go to messaging and setup my email address in other since slingshot comes under other email providers.... i put in my email addy and password and the phone accepts it and takes me to my inbox but when i try to send and receive emails it comes up and says >> could not send email,please try again....
i have spent about 4 hours on the phone 3 times to nokia in the phillipines of all places and they cant even help me get it working..... yet when i put in my hotmail addy it sends and receives straight away...
I have spoken to slingshot and vodafone & i have got the incoming and outgoing mail server details correct but the phone wont let me put them in the details for incoming and outgoing servers.... HOW STUPID IS THAT ????
the only way it will let me enter those details is by putting my email addy in wrong and then it lets me do it but then my email addy is wrong...cant bloody win
can anyone who is using slingshot email with a nokia asha 300 please help ??
thnxContact the email provider to troubleshoot the issue.
hotmama4278 wrote:
i was told that it doesnt like two emails with the same address
That's a load of manure. -
Ipad iOS 7.1.1 can't send or receive mail with my icloud mailacvount
II'm offshore on a boat all apps and internet via wifi works fine but for some strange reason my icloud mail can't send or receive keeps telling me server not responding any help please
Hello 786steph
If you are having issues with sending and receiving email on your iPad, then check out the troubleshooting in the articles below. It will walk you through general troubleshooting as well as checking the settings and checking to make sure that iCloud is working for all mails users.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
iCloud: Troubleshooting iCloud Mail
http://support.apple.com/kb/ts4002
Regards,
-Norm G. -
How to correctly configure send and receive connectors for SBS2011 exchange to connect to EOP
Hello SBS fans,
we have a customer with SBS2011 and exchange. The server email is setup for Exchange Online Protection.
It passes the Remote Connectivity Analyzer for inbound and outbound email. It shows a warning for the spf, saying it cannot find the spf record, BUT MXtool box passes everything associated with their domain name, including the spf record.
They are now getting some bounced email from yahoo servers, referencing this ip
65.55.169.249, which is a valid Microsoft ip.
I checked the bounce back email header carefully, and found a reference to an internal ip, 192.168.11.14, which just happens to be the ip of the user's desk PC!! - NOT the local addr of the sbs2011 server (which should not be there anyway)
I will guess that there is an incorrect setting in one or both of the hub transports? There is a correct smart host connector.
I am no longer sure about the other connectors!
Any ideas on this?
ewholz
Network and Server InstallsHi,
à
It shows a warning for the spf, saying it cannot find the spf record
Would you please let me know the complete warning message that you can get? Meanwhile, would you please let
me know how long ago you add the SPF record? Be
more than 72 hours?
Please also refer to following article and check if can help you.
Configuring
Exchange 2007 Hub Transport role to receive Internet mail
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu -
I am trying to find information about a type of message I received on my iPhone. It appears as the message only on my locked screen, I must press on the green Dismiss icon at the bottom and the message disappears and then I can unlock my phone with passcode and use phone. This message stays there until I press Dismiss. It shows no sender or where it came from but is being sent to my phone number. Only a message the sender intends me to read shows on the screen then once dismissed, it disappears and does not show up or save in any application on my phone. Any ideas?
Click here and request assistance.
(91679) -
Good morning everyone,
I really need your expert help about the following issue. I ve developed a web service in C#. Its core code has a Powershell script inside which makes a call to SharePoint 2010 search service to make some search queries, and returns some URL of some files.
In Powershell code I make connection to SharePoint search service using the Farm Admin account. This system works, but given results are not filetered by the user using the web service (I remember you I m using the Farm admin account in PS code)
How can I use user account to make some queries ? How can I filter search results by user ? In Powershell code I put username and password of Farm Admin account and I know them because I m the farm administrator, but
what about if I want to pass Powershell code some other user credentials ? Of course I cannot know his credential .. Can I do it , in which way ?
Any help is really appreciated !
GaeHi Gae, if you are using web services, you shouldn't need to add a SharePoint DLL to your project. I would advise against using C# -> PS -> Web Service Call -> PS -> C# if you could go straight C# -> Web Service -> C#.
Anyways, back to the matter at hand. Do you know what type of authentication your SharePoint server is running? Is it direct NTLM, NTLM over Kerberos, Claims, or something different?
The following article provides the various types of impersonation available in SharePoint:
http://extreme-sharepoint.com/2012/05/30/impersonation-elevation-of-privileges/
Dimitri Ayrapetov (MCSE: SharePoint)
Maybe you are looking for
-
Regarding Innner and outer joins wrt to Infosets
Hi All, Can anyone explain me what exactly left innner join, right outerjoin etc.. with respect to INFOSETS. Basically i want to know about the inner/outer joins. regards, Ali
-
**#bsp timed out error in SRM 4.0**#
Hi, In SRM 4.0, i am executing BSP application '/CCM/SRM_CSE' through transaction se80.While i try to execute the controller <b>'main.do'</b>, i am getting an error '<b>connection timed out'</b>. Please help me regarding this. Thanks and regards, Raj
-
Displaying focus points in LR3
Hi all Is it possible to display focus points in Lightroom? I switched to Lightroom from Aperture, which used to let me do this, so I guess the information must be stored in the EXIF data somewhere. Many thanks
-
How to find local systems free space?
Hi all, Can any one tell me, how to find C: free space in windows using java?
-
Hi, I've successfully setup generic ikev2 vpn profile on my z10 and made it to auto connect over mobile network, and link it with my wifi. Now here is something that I don't understand : 1. On the VPN screen, it says tap profile to edit. It won't hap