Proxy to SOAP with an attachment

Hi all,
we have a scenario proxy to soap,and the volume of data sending from proxy to soap is more than 20 mb.
as the third party system can't receive 20MB of data in one single soap message and we can't split this message as the whole data is related one WorkOrder. we thought of sending the SOAP message with an attachment.could any one guide me how can i attach the payload data to soap as an attachment and send.
thank you.

Hi,
It's pretty easy - just have a look at my article:
The specified item was not found.
and let me know if this works out for you
Regards,
Michal Krawczyk

Similar Messages

SOAP with attachments, attachment streaming

Hello all,
We are currently in the process of designing an integration service that uses web services (SOAP) as the means of communication.
There are very large binary attachments included with these SOAP messages. MTOM ja SAAJ are to be used (propably CXF).
However, as these attachments are very large (100MB), I would like to stream the attachments "through" the integration server.
Is this possible? Can I somehow stream the SOAP attachment from the source system directly into the target without saving it as a whole into the integrating server application?
Thank you for all your help! All solution suggestions are apprechiated :-)

Hi Aalap,
In version 1 of WebLogic Workshop SOAP attachments are not supported.
Attachments will be supported in the next version. If support for SOAP
attachment is an important requirement for you application, you can use
WebLogic Web Services which supports SOAP Attachments.
Please refer to the following document for more information on this
http://e-docs.bea.com/wls/docs70/webserv/index.html
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Aalap" <[email protected]> wrote in message
news:3da1ebc4$[email protected]..
>
>
Hi,
Does Workshop support SOAP with Attachments? I am writing a web servicewhich
serves files (like MS-Word documents etc) to clients upon receiving theirrequest.
So what are the various options for sending the file to the client?
Please help.
Thanks in advance.
Regards,
Aalap Parikh.

Proxy to SOAP with Payload + Stripped Payload as ZIP

Hi Gurus
I have a requirement from Proxy message to Web Service call where i need partial payload to be zipped and send
I am looking at blog below, which will help to zip the payload for any message.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50ce0433-4309-2b10-4bb4-d421e78463f7?QuickLink=index&overridelayout=true
Please correct me if my approach is could work or suggest me any easy or possible ways
Source Structure
<Root>
<Elemtn1>Element</Element1>
<Element2>Element2<Element2>
<ZipPayload>some binary data goes here</ZipPayload>
</Root>
Target
<Root>
<Elemtn1>Element</Element1>
<Element2>Element2<Element2>
<ZipPayload>Filename.zip</ZipPayload>
</Root>
The out still needs to have the payload, part of it will be zipped as an attachment to the soap receiver adapter and mentioned zip file name in the 1st payload
Straight interface mapping with 2 Message Mappings.
1. Map the source to target and generate dynamic file name and assign into ZipPayload field
2. Use the the method from the link above on zipping the file.
Will this work sending payload with attachment via web service? Please advice
I appreciate your input in advance

Sender is not an option, because of lack of skills
XI MM, we have two maps because, source payload will be split into two sets
1 Partial Header Payload
2. Details Payload will be zipped and generate dynamic zip file name and attach to the Payload 1.
The output should look like in the earlier example
Payload
<Root>
<Elemtn1>Element</Element1>
<Element2>Element2<Element2>
<ZipPayload>Filename.zip</ZipPayload>
</Root>
+
Zip File
Payload + Zip file as an attachment when it calls the web service.
I am yet to do the POC, meanwhile i am checking here to see if it is feasible option.
Btw, can any one can compile the java code and attach the class file here for the following link please. Appreciated in advance. I have no java experience in first place and it will be a tough thing to do from my side
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50ce0433-4309-2b10-4bb4-d421e78463f7?QuickLink=index&overridelayout=true

Proxy to SOAP scenario-With Attachment and Mapping

I have a scenario to be developed, it is a Proxy to SOAP sceanrio.
There are about 8 fields coming from Proxy.
Can we create an attachment from these fields.
Also we have to do a mapping of this attachment to a field in the target External Defination and also 2 fields of the 8 have to mapped to the other respective fields of the external defination.
All this has to be posted on a webservice through SOAP with
the 2 fields in payload and
the attachment in the attachemnt section of the message
Could this be achieved?

In ABAP proxy you create a message with the two fields which you need for main SOAP message.
The attachment is created exactly how it is requested from web service.
You create a String with the XML (including tags) and do a codepage conversion to UTF-8 (or whatever is requested)
Note: The payload is created in UTF-8 automatically, the attachment is treated as binary.
You can also use a Java mapping for creating the attachment, if you have good Java skills, but I recommend to use program code for one purpose only on one place.

Proxy to SOAP Scenario, payload with the SOAP envelops

Hi ,
We have Scenario like Proxy to SOAP,As per Business requirement they are asking payload with ENVELOP . Like below message
================================================================
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://www.w3.org/2003/05/soap-envelope" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENC="http://www.w3.org/2003/05/soap-encoding">
 <SOAP-ENV:Header>
 <nseps:endpoints xmlns:nseps="urn:schemas-IBX:/docs/endpoint.nsendpoint" SOAP-ENV:mustUnderstand="true">
 <nseps:to>
 <nseps:address>b2b2ce96-7a92-1000-910f-c0a8b4340001</nseps:address>
 </nseps:to>
 <nseps:from>
 <nseps:address>b2b2ce96-7a92-1000-910f-c0a8b4340001</nseps:address>
 </nseps:from>
 </nseps:endpoints>
 <nsprop:properties xmlns:nsprop="urn:schemas-IBX:/docs/property.nsproperty" SOAP-ENV:mustUnderstand="true">
 <nsprop:identity>3198841w-fa4d-dafa-2797-89029c15255b</nsprop:identity>
 <nsprop:sentAt>2010-01-18T02:42:08Z</nsprop:sentAt>
 <nsprop:topic>CostObjectInformation</nsprop:topic>
 </nsprop:properties>
 </SOAP-ENV:Header>
 <SOAP-ENV:Body>
//Payload of the message to be added here.
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
I am trying out this in XSLT, but I am not sure how to add the SOAP Envelops and these Envelops are Static.
Can someone help me out in this.
Joe

But if you look at the SOAP Envelop Structure below it is not XI generated SOAP Envelop. IBX (3rd party) has its own standards, so XI has to Produce the SOAP Envelop according to their standards.
I have created the XSD with SOAP Envelop stucture with what ever structure 3rd party wants, but the problem is when Creating the SOPA Envelp tag, where it has a ":" where its not allowing me to create the valid XSD. And at the same time 3rd party is not in position to give us even WSDL file and we are not using Webservice call and they are not able to provide the XSD with SOAP envelop structure.
I thought of going for XSLT and started doing as well with what ever XSD 3rd party has provided, which does not have the SOAP Envelop structure and has only payload XSD structure.
80% of the SOAP Envelop structure is Static, it does not change. Only 2 fields keeps changing. IS there any solution that we can create XSD with the SOAP structure with Special Character ": "or is there any way in doing in XSLT.
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://www.w3.org/2003/05/soap-envelope" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENC="http://www.w3.org/2003/05/soap-encoding">
<SOAP-ENV:Header>
<nseps:endpoints xmlns:nseps="urn:schemas-IBX:/docs/endpoint.nsendpoint" SOAP-ENV:mustUnderstand="true">
<nseps:to>
<nseps:address>b2b2ce96-7a92-1000-910f-c0a8b4340001</nseps:address>
</nseps:to>
<nseps:from>
<nseps:address>b2b2ce96-7a92-1000-910f-c0a8b4340001</nseps:address>
</nseps:from>
</nseps:endpoints>
<nsprop:properties xmlns:nsprop="urn:schemas-IBX:/docs/property.nsproperty" SOAP-ENV:mustUnderstand="true">
<nsprop:identity>3198841w-fa4d-dafa-2797-89029c15255b</nsprop:identity>
<nsprop:sentAt>2010-01-18T02:42:08Z</nsprop:sentAt>
<nsprop:topic>CostObjectInformation</nsprop:topic>
</nsprop:properties>
</SOAP-ENV:Header>
<SOAP-ENV:Body>
its a high priority issue.
Thanks in Advance.
Joe.

Proxy to SOAP Sync with BPM (1:N)

Hi
Proxy to SOAP Sync and return message will be posted back to R/3 via proxy. This is Async to Sync using BPM. And the split happens in BPM as well. We are suppose to go with BPM here, that's the mandatory step for learning purpose
I am trying to follow the steps below
1. OB Async MI Proxy outbound message into XI
2. ABS Async MI to receive the proxy message into BPM
3. ABS Sync MI SOAP Sync message
4.ABS Async MI for Proxy Inbound to R/3
5. BPM for Split
I am at the stage of writing spec, can't execute any of the steps and have no prior experience with this kind ofscenario. If anybody have experience, please do share exact steps. Thanks in advance

Hi,
Your steps are correct ... in the IP, the following steps will be there -
Rcv -> Transform -> Send (sync) -> Transform -> Send (async).
I am not too sure what you mean by step 5 - BPM for split ?
Regards,
Neetesh

Soap with Attachment

Hello,
I need to develop a WebDynpro application with NetWeaver 2.0 for SAP EP6 that call a remote web service in order to send an attached file with SWA (Soap With Attachment) methodology. The kind of file to attach is XML.
Can someone give me refers or indications to implement it?
Thanks and best regards,
Matteo.
Edited by: Matteo De Santis on Oct 21, 2008 11:45 AM

Following link might help you :
http://help.sap.com/erp2005_ehp_03/helpdata/EN/5e/ea656273b74cf386a1f29fc55721fd/frameset.htm
Thanks.

RFC to soap with attachment

Hi all,
I need to implement a synchronous scenario where an R/3 system sends data via RFC to an external system that expects it in the format of soap with attachment. Then the external system responds with soap message without attachment.
My main concern is how to create a soap attachment from payload that I get from the RFC sender adapter.
I would appreciate any your suggestion how to implement this scenario. If possible, I would prefer to avoid using java modules and BPM, since I am not very skilled with them.
Thanks Janos.

>
janos malizero wrote:
> Hi all,
>
> I need to implement a synchronous scenario where an R/3 system sends data via RFC to an external system that expects it in the format of soap with attachment. Then the external system responds with soap message without attachment.
> My main concern is how to create a soap attachment from payload that I get from the RFC sender adapter.
> I would appreciate any your suggestion how to implement this scenario. If possible, I would prefer to avoid using java modules and BPM, since I am not very skilled with them.
>
> Thanks Janos.
well i think your darkest fears just came true ... the only option here is to write a module to create the attachments for you. The trick is once the module create the attachment, you need to check the option keep attachments in the SOAP receiver CC.
How to create modules -
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bdc14e1-0901-0010-b5a9-a01e29d75a6a

InvalidSecurity Exception in WS and SOAP with Attachment

Hi all, 
 
I created a EJB based webservice with the following signature: 
public String businessMethod2(byte[] arg1) {..} 
 
 
This Method is exposed as webservice, which is configured as SOAP with Attachment. 
All security or authentication settings are disabled by intention. 
The input param arg1 should be a binary file.
 
When I call this webservice I always get the following response: 
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" 
xmlns:xs="http://www.w3.org/2001/XMLSchema" 
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> 
 <SOAP-ENV:Body> 
 <SOAP-ENV:Fault> 
 <faultcode xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">wsse:InvalidSecurity</faultcode> 
 <faultstring>000F1F90EDDB006C00000012000014D8000437A5EE6DAE4E : WS Security can only be applied on a SOAP document.</faultstring> 
 <detail> 
 <ns1:com.sap.security.core.server.ws.service.WSSecurityException xmlns:ns1="http://sap-j2ee-engine/error">000F1F90EDDB006C00000012000014D8000437A5EE6DAE4E : WS Security can only be applied on a SOAP document.</ns1:com.sap.security.core.server.ws.service.WSSecurityException> 
 </detail> 
 </SOAP-ENV:Fault> 
 </SOAP-ENV:Body> 
</SOAP-ENV:Envelope> 
 
 
My guess is, that the WAS 7.00 SP11 is magically configured for applying WS-Security to every webservice. 
 
The Security Profile settings for Inbound / Outbound - Paramters is "None" in Visual Admin Webservice Security. 
 
How can I get rid of this Exception and make the webservice work?
 
 
regards 
Gabi 

http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.webservices&item=4967
grazieee wrote:
>
HI, i have found an example that illustrates the reception and return of SOAP attachments
in web service method. However, the weblogic workshop I am using does not recognise
'DataHandler'. I typed 'public String echoAttachment(DataHandler dh) and it said
'web service does not support such data type'. Is there any resolution to it?
And if convenient, can i have the source code of attaching images to SOAP?
Thanks alot.
Good Day!
grazieee
P/S: I'm using weblogic version 8.1

SOAP with Attachment Support in Web AS Java

Hello,
I want to write an extension to an existing Java application running on Web AS to take a PDF (which is a binary object in the context) and submit it using a Web Service call to a Web Service running on a WebSphere App Server. My idea is to use SOAP with attachments to do this. I know how to create a simple Web Service call with the NWDS, but I am not so sure about a Web Service call with an attachment.
1) Is SOAP with attachments supported in Web Java/NWDS?
2) Does it require a specific Web AS 6.40 SP Stack?
3) Has anyone used this before? Is there anything I need to consider (e.g. encoding of the attachment)?
4) Is there a maximum file size for the attachment?
You help is appreciated. And if I get it running I can show it at TechEd
Cheers!
Matthias

I found what causes the problem.
I use resource bundle to handle i18n and one of bundle is myapp_zh.properties for Chinese locale. In browser I add Chinese [zh] in Language Preference then the web page should display Chinese character.
What puzzles me is that encoding of the page with Chinese characters is Chinese Simplified (GB2312) rather than UTF-8. Tomcat correctly sets page Encoding to UTF-8 since I specify <%@ page language="java" contentType="text/html;charset=UTF-8" %> in each JSP file. Why Web AS ignores this and returns Chinese character in GB2312?
Thanks a lot
John

How can I get JAXM SOAP with Attachement parts?

I received a SOAP with attachment message.
Attached data is XML document("text/xml" type).
But when I try to get a attachment part by using below source code, I got a NullPointerException.
Iterator it = message.getAttachments();
AttachmentPart attachment = (AttachmentPart)it.next();
StreamSource content = (StreamSource)attachment.getContent(); <=content is not Null.
InputStream inputstream = content.getInputStream(); <= inputstream is Null.
StreamSource object is OK, but it doesn't return InputStream object.
Does anyone know what the problem is?
Thanks in advance.
Junhong.

Hi!
Use the following to get the stream:
InputStream is = attachment.getDataHandler().getInputStream();

Tool to test Webservices using SwA (Soap with Attachements)

Hi All,
I generally use the took xmlspy to test any webservice.
But now i am working with a webservice that is using SOAP with Attachemtns.
it seems we cannot use xmlspy to test/invoke webservices that use soap with attachements.
is there any tool by which we can send/receive soap message along with attachements to and from webservices.

Hi,
Have you tried SoapUI?
The standard (free) version & SoapUI Pro both support soap with attachments. Try it out & see if it works for you. SoapUI is proving to be one of the best tools for testing web services.
Regards, Trevor

SOAP to SOAP Scenario with an Attachment

Hi,
We are using this scenario for transfering file from one location to another location with an attachment. From Web service client we are succefully sending an attachment to XI system. During mapping, we are facing problem while sending an attachment from inbound schema to outbound schema. Being XI is using XML for mapping and important thing is here that whether XML can handle attachments or not? If yes, then whats the way to handle attachment issue in XI 3.0?
Thanks and Regards,
Rohit Goyal

Hi Holger,
Thanks for your reply but wanted some more inputs on this. We have define two parameter as inbound and outbound schema as FileName and Filecontent. FileName contains the name of file and FileContent containes href link which points to an attachment. FileContent is of type base64Binary. Similarly FileName and FileContent are defined in outbound schema as well. href linf should pass from filecontent Inbound schema to Outbound schema. But that is not passing. In receiver side, we have web service running which takes these two inputs (FileName, and fileContent).
But as you r saying we don't require mapping? Can you let me know, then how we can pass input varaibles to the webservice.
Pls elaborate more on this.
With Regards,
rohit

SOAP Sender Adapter Attachment Handling in Response message

Hi Experts,
I have a SOAP <> XI <> Proxy scenario where an external WS client sends a SOAP request and receives a SOAP response along with an attachment.
The problem is that the WS client is unable to retrieve the attachment from the SOAP response although the SXI_MONITOR shows both the payload and attachment beign sent out. In the SOAP sender I 'DO NOT' tick the 'Keep Attachment' parameter.
If I tick the 'Keep Attachment' parameter, then the payload and attachment both goes as attachment.
I need help in writing an adapter module which would ensure that the payload remains as the main payload and only the additional attachment goes out as an attachment.
Regards,
Shobhit

Hi Shobhit
You can refer this generic guide
How to create adapter modules for J2EE engine
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3bdc14e1-0901-0010-b5a9-a01e29d75a6a
How-to create a web service with attachments (SOAP With Attachments)
How-to create a web service with attachments (SOAP With Attachments)
Rename Attachment Adapter Module
Rename Attachment Adapter Module
Hope this will help
Thanks
Gaurav

Binary Attachments - MTOM vs. SOAP with Attachments

Hello everybody,
i am kind of stuck by implementing a soap to proxy scenario! I wanted to use MTOM to transfer the messages together with the attachments, but until now i couldn't find out if this is possible at all using the ws-adapter with backend proxy (version 701)!
I have seen this already:
http://help.sap.com/saphelp_nwpi711/helpdata/de/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
unfortunately im not a abap coder, but i can see using attachments in proxys should work!
But how? Am i forced to used soap with attachments on sending webservice? If yes, have you got an example for me?
I would appreciate any help!
Thanks in advance,
Markus

Hi Amar,
thanks for your reply, i know the mtom theory, but i don't know how to do it with sap pi on proxy side!
(By the way, your link throws a 404!)
Using soap adapter with enabled "keep Attachments" option, the MTOM-Attachment is getting processed, but on proxy side, using soap adapter (keeping attachments) to call proxy, it crashes on the backend side (version 701).
I tried to make a webservice out of the proxy in soamanager, but i didn't get this working, as i have never done this. Also i didn't find an option for mtom in soamanager. I am also wondering why mtom is only supported in ws-adapter 7.10 but not in 7.11, why is this? And is it possible to use soap-adapter on OB-side and WS-Adapter on IB-side, or can i only use ws-adapter for direct communication?
Lot's of questions i am facing ;-)...
Kind regards,
Markus

Proxy to SOAP with an attachment

Similar Messages

Maybe you are looking for