PS and PY data extraction.

Hi all,
I need to do the standard content extraction for PS and PY module.
Are the extraction procedure same as FI modlule ?
Do we need to fill set up tables in this case.
What are the settings need to be done for extraction.
Can anybody give me some overview on it by answering the above questions. Any kind of document
will be appreciated.
Thanks in Advance.
Akash

hi,
These are the datasource for PS.
Data Sources:
0PS_WBS_EVA
0PS_NAE_EVA
0PS_NWA_EVA
0PS_NTW_EVA
0PS_ORD_EVA
For more detail,
http://help.sap.com/saphelp_nw70/helpdata/EN/bc/82c839c572b97be10000000a114084/frameset.htm
hope this helps you ..
regards,
shikha

Similar Messages

Header and Item Data Extraction

Hi Gurus,
For reporting needs, I have to extract both Sales Billing Header (2LIS_13_VDHDR) and Item Data (2LIS_13_VDITM).
Can anyone please give me some idea about the Data Staging.
1. Do I need to create 2 DSO (1 for Header and 1 for Item) for loading the respective Data and then push them into 1 Cube ?
Or
2. I create 2 Cubes (1 for Header and 1 for Item) and load the Data into them.
Or
3. I extract both Data Sources into 1 DSO or 1 Cube.
I have to do reporting on MultiProvider so in all 3 cases (OR as you suggest) I have to link all the InfoProvider to 1 MultiProvider.
Please let me know the right way and guide me ASAP.
Points will be awarded !!!

Hi as you are loading with the standard Business content datasources for the cubes , it is better to load for their respective cubes which are in business content. The performance of the system also good ,if we use business content objects.
Then come to your requirement, just load the data for the Business content cubes for the respected datasource and combine them With Multiproviders and generate reports
Hope it can help you

Userexits and master data extraction

Hi guys
1)can any one send me the document regarding to how to do the enhancements/modifications in RSA6 and cmod , i need the information of how to do the modifications in RSA6 after select the structure and press the enhance structure tab and also how to do the functional enhancement after press the functional enhancement tab
2) i couldn't find any SD cubes in business content in bw side, generally mm comes under supply chain management , then SD comes under what area
3) from where we can extract the master data in R/3 , how we can confirm thats master data before extraction,
i will assign the points to say thanks
regards
Bala

2) i couldn't find any SD cubes in business content in bw side, generally mm comes under supply chain management , then SD comes under what area
SD will be under SD.
3) from where we can extract the master data in R/3 , how we can confirm thats master data before extraction,
If you dont see the suffix Attr , TEXTS, HIER afteer the data source name, then it is not master data.
More than this, if you see the name of the data source itself, you can make out. If not, if you look at the fields of the data sources, you can make out. If not, execute RSA3, and the data will tell you whether it is master data or transaction data.
Ravi Thothadri

Actual Cost, Resource and WBS data extract and upload

Can anyone help with getting data out of Project system? Does an extract/upload BAPI / IDoc exist?
If not does anyone have any other advice on how to do this?
Rgds,
Mark

just go to the tables and extract to excel or use reports to extract data to spreadsheets

Invalid data status error during the data extraction

Hi,
while extracting capacity data from the SNP Capacity view to BW. i get the "invalid data status error" and the data extraction fails.
when debugged the bad requests of the ODS object, i found that for a certain product(which has both positive and negative input and out qtys) co-product manufacturing orders were created. but this product was not marked as the co-product and functionally its fine.
how can i rectify the data extraction problem..can you advice.
Thanks,
Dhanush

Sir,
In my company for some production order status some are having "errors in cost calculation" ie "cser" .how to deal these kind of errors.

SAP Data Extraction requirements - mySAP SCM SPP/ ERP

Hello All,
Could you please explain me how to start for this requirement?.
Business Summary:
For MM Planning to have a substantial range of Master and Transactional data to get extracted from the SAP system for reporting and analysis purposes. A list of the data requested for extraction for the SCM.
Functional Discription:
There is a general MM Planning requirement to have most Master and Transactional data extracted from SAP-APO for reporting and analysis purposes in order to support following business tasks:
 process evaluation and optimization
 error analyzes
 ad-hoc reporting
 planning processes out of scope for SCM launch (e.g. ATR process)
The data need to be automatically extracted on regular basis (i.e.: daily/weekly/monthly/yearly: this will be defined during the next steps for every single set of data) and made available in a structured environment to the SCM Planning Team for the above mentioned processes.
The requirement for data availability outside of SAP APO comprises both current data and historical data.
FoE: today no "final" report is generated by the SCM Planning team directly within the current data warehouse environment. Most data are extracted from the current data warehouse to external tools. Current assumption is that this will remain unchanged.
Some regular reports (MBB, Inventory Dashboard) may be directly developed in Business Warehouse in future if this offers any improvement (flexibility, design, handling.). This will be investigated by the SCM Planning Team after go-live.
FUS: For the analyses and the planning processes that are out of scope, the data will need to be extracted so that it is available for use in analytical tools that are powerful enough to process the data and appropriate calculations.
Regular reports may be directly developed in the BW if it is determined that that is the most appropriate location and tool. Otherwise, the data will need to be integrated into reports generated using tools outside of SAP. That determination will needs to be completed based on the type of data being reported.
Thanks & Regards
PRadeep
Message was edited by:
 Pradeep Reddy

Hi,
You can download all the master guides from the SAP service marketplace (http//service.sap.com/instguides).
Cheers,
Mike.

Master data extraction ECC to BW

Hi Friends,
We are implementing bw 7.3 in the areas of SD APO DP SNP. This is a fresh implementation.
What are the initial settings have to do in the bw system?
How to extract the master data and transction data from ecc to bw.
Thanks and Regards
sri

Hi,
Please search the forum you will get lot of thread discussing about master data and transaction data extraction.
More of less the process of extraction remains same across different BW versions.
Regards,
Durgesh.

Questions regarding TARGET DATA of a selection set and usage of extracts

1. In iSetup Users Guide (121azug.pdf), pg5-4, under 'Viewing a Selection Set',
it has the following lines:
Supports Update: If the data object updates the target data during load,
then the　Support Update flag appears
There is no explanation on "target data" in earlier section.
Can someone explain what this target data is?
2. In iSetup Users Guide (121azug.pdf), refer to the image on pg5-14, there is a download link
in order to download extract. What is the downloaded extract for? Is there any documents
explaining how to use the downloaded extracts? I am thinking that this downloaded extract
can be used to upload in other env but I am not sure how to use these.
Any advise?
Thanks.

You are on the right track!
+--the entire iTunes folder found in My Music+
This contains the itunes library database files (iTunes Library.itl which has metadata on ratings, play counts) and all the itunes library content files (Artist/Album, movies, etc.)
The lyrics are inside each songs' file.
The Artwork should also be in this folder.
+-User Name\Application Data\Apple Computer+
+-User Name\Local Settings\Apple Computer+
These include the backups you need for the ipod and apps data.
You don't need to deauthorize if you are simply reinstalling itunes. You only need to deauthorize if you are reinstalling Windows itself.
+--Can I copy the iTunes folder from the external HDD and paste it back into the same location after I recover my laptop+
Yes
+if the version of iTunes is slightly different (I have 10.1.0.54)?+
If the new version is at least 10.1.0.54
It won't work to go backwards to an older version such as v9.0

Data Extraction and ODS/Cube loading: New date key field added

Good morning.
Your expert advise is required with the following:
1. A data extract was done previously from a source with a full upload to the ODS and cube. An event is triggered from the source when data is available and then the process chain will first clear all the data in the ODS and cube and then reload, activate etc.
2. In the ODS, the 'forecast period' field was now moved from data fields to 'Key field' as the user would like to report per period in future. The source will in future only provide the data for a specific period and not all the data as before.
3) Data must be appended in future.
4) the current InfoPackage in the ODS is a full upload.
5) The 'old' data in the ODS and cube must not be deleted as the source cannot provide it again. They will report on the data per forecast period key in future.
I am not sure what to do in BW as far as the InfoPackages are concerned, loading the data and updating the cube.
My questions are:
Q1) How will I ensure that BW will append the data for each forecast period to the ODS and cube in future? What do I check in the InfoPackages?
Q2) I have now removed the process chain event that used to delete the data in the ODS and cube before reloading it again. Was that the right thing to do?
Your assistance will be highly appreciated. Thanks
Cornelius Faurie

Hi Cornelius,
Q1) How will I ensure that BW will append the data for each forecast period to the ODS and cube in future? What do I check in the InfoPackages?
-->> Try to load data into ODS in Overwrite mode full update asbefore(adds new records and changes previous records with latest). Pust delta from this ODS to CUBE.
If existing ODS loading in addition, introduce one more ODS with same granularity of source and load in Overwrite mode if possible delta or Full and push delta only subsequently.
Q2) I have now removed the process chain event that used to delete the data in the ODS and cube before reloading it again. Was that the right thing to do?
--> Yes, It is correct. Otherwise you will loose historic data.
Hope it Helps
Srini

Master Data and Transaction Data For DB Connect extracted Data...

Dear Experts,
I have been working on SAP NetWeaver BW 7.3 and for the first time I have extracted data from Oracle DBMS by using DB Connect. I have successfully extracted data of a View namely Sales_View into BW by creating a DataSource. This View has about 100 fields and I have been told that this view consists of Master Data and Transaction Data too. For my further reporting needs say building a Dashboard or InfoSpace I have to design a DSO and InfoCube for this DataSource. I'm bit confused about the Master Data and Transaction Data of this DataSource.
1. Should I create all custom InfoObject against all fields of DataSource for DSO and InfoCube design?
2. Do I need to create and load the Master Data for all InfoObjects or I need to create or load the Master Data for only those InfoOjects which will be
used for drill down or reporting in Dashboard or InfoSpace?
3. Do I need to load the Master Data manually by creating Flat Files and using these files for Master Data loading for required objects?
4. How should I approach the designing of DSO and InfoCube?
I will appreciate your inputs in this matter.
Many thanks!
Tariq Ashraf

Thanks!

How to find all the Master data extract structures and Extractors

I intend to create Master data dimensions closely similar to SAP BI in a 3rd party system. I would like to use SAP's standard extractors for populating the master data structures in SAP BI and then use a proprietary technology to create similar structures in a 3rd party database.
Question: How to get a complete list of all Master data extract structures and corresponding extractors?
Example: In ECC if I do SE80 and give 'Package' and 'MDX' and then press the 'display' spectacles, I get a list of structures and views under "dictionary objects" covering Material, Customer, Vendor, Plant Texts and attributes.
How do I get the remainder of the Master data extract structures viz. Purchase Info Records, Address, Org Unit etc?
Regards
Sasanka

Hi,
try the table ROOSOURCE and search the data source with string in astrick attr for master data and for text with text
This will give you the list of all the master data source in the system and it contains a column which tells about the extract structure and function module used by each.
Thanks
Ajeet

Data mismatch between TABLE and Std. Extract str. (AFPO & 2LIS_04_P_MATNR)

Hi,
I am getting data mismatch in ECC standard table and ECC standard extract structure. Please help me.
I am using 2LIS_04_P_P_MATNR data source (standard extract structure).
I have following data in ECC Table (AFPO - Order Item).
AUFNR (Order Number) --> 4000460
PGMNG (Total planned quantity) --> 0
PSMNG (ORDER QTY) --> 2000
Extract Structure is showing following data.
AUFNR (Order Number) --> 4000460
PGMNG (Total planned quantity) --> 2000 (It should be zero)
PSMNG (ORDER QTY) --> 2000
I have checked with many other order numbers. The extract structure in RSA3 is showing correct values only if PGMNG is non-zero values. If PGMNG is zero, then it is automatically assigning PSMNG value.
Is this common? I want to display correct values for PGMNG from AFPO Table. Why this mismatch between table data and extract data. I have done all required steps refreshing data (deleting setup tables, filling set up tables etc.).
pls suggest. Poinsts will be assigned to every useful answer.
Thanks in advance.

Hi Avneet,
I have a similar problem where in AFPO shows value 1000 in PSMNG field and 1200 in RSA3 for extractor 2LIS_04_P_MATNR.
I have found that the standard feature of the extractor extracts the data at the time of release of process order. If the process order is changed after the release then the extractor will not picup the chagne.
Ex: AFPO value 1000 ---BI Value 1000
Now released in ECC
AFPO value 1000 ---BI Value 1000
In ECC value changed to 1500 after the release. BI will not pickup the change.
Extractor is pulling the data from MCAFPOV table. You can check the values, there it matches with RSA3 values.
I was just going thru forums for the solution. After i found the solution. I am just updating it.
Hope it helps you.
Thaks
Srikanth

Data extract/convert from SAP system and load to Unix system - Urgent

Hi,
I have a requirement that I need to extract data from SAP and each data field will have some conditions and need to map/Load it to the Legacy Unix system.
there are four kinds of data objects of HR system, need to extract them individually and map those into Unix system.
Can anyone please suggest me step-by-step how to go about it....like
do we need to write a report for that?
do we need to use Function modules? etc.,
How to set mappings of that Data to a file?
How to map that file to Unix system?
Need to run those on daily basis and after first run, only changed data file need to be loaded. how to do this?
thanks
Alankaar
rewarded with the points.

Hi
I can't say this becouse I don't the problem, anyway u have to do it by yourself.
U should create:
- a document where u define the file format: data type, size and name of the field of the unix system;
- a document for the mapping: link between SAP fields and Unix system fields
Based on these document you'll create a structure on the report:
DATA: BEGIN OF STR_UNIX_SYSTEM,
 FIELD1 ...,
 FIELD2 ...,
 FIELDN....,
 END OF STR_UNIX_SYSTEM.
and the code to transfer the data from SAP to legacy:
MOVE: <SAP TABLE>-FIELD TO STR_UNIX_SYSTEM-FIELD1,
So all steps have to be defined in the report before downloading the file.
So I don't know which legacy system you're speaking about, after creating the file the legacy should read it in order to upload the data.
U can create a daily job for that report, if you need to transfer the changed data only you should read the change document table (CDHDR and CDPOS) but I don't know HR so I'm not sure these tables are available for HR.
Max

Field symbols and data extract

hi frenz,
Can anybody please give me details about field symbols and data extracts what is the purpose of using them and regarding the performance issues for the two.....
if some one explains with an example its going to be fine......
Please don tell me to refer the 980 or help document.....
Please help me out

Field symbols offer functionlity similar to pointers in other programming languages. It does not occupy memory for the data object, it points to the object that has been assigned to the field symbol. You use the assign command to relate to the data object. After the assign operation you can work with field symbol in the same way as with the object itself.
You define the field symbol as: field-symbols <fs>.
field-symbol <fs>.
data field value 'X'.
asssign field to <fs>.
The field symbol <fs> now inherits all the properties from the assigned field, and you can work with the field symbol in the same way as with the field itself.

Data Mart and Data Extraction from an Infocube

Can a data mart which is built on one Infocube in BW support delta extraction? We have two separate BW systems and are trying to extract data from one Infocube in one BW (Source) and load it to one Infocube in another BW(Target)?
We have built a data mart on the source BW infocube and have successfully been able to extract and load the initial data load into the target BW infocube. I noticed that the field 0RECORDMODE was not on the datasource that was created to support this data mart so my gut feeling is that we will not be able to do delta data extractions from this data mart. Any feedback or confirmation of this?

Hi,
The InfoCube that is used as an export-DataSource is first initialized , meaning that the current status is transferred into the target BW. When the next upload comes around only those requests will then be transferred that have come in since the time of initialization. Different target systems can also be supplied like this
Since it is request based ..data mart on info cube supports delta.
Hope its helpful,
Anu.

PS and PY data extraction.

Similar Messages

Maybe you are looking for