Data mismatch between TABLE and Std. Extract str. (AFPO & 2LIS_04_P_MATNR)

Hi,
I am getting data mismatch in ECC standard table and ECC standard extract structure. Please help me.
I am using 2LIS_04_P_P_MATNR data source (standard extract structure).
I have following data in ECC Table (AFPO - Order Item).
AUFNR (Order Number) --> 4000460
PGMNG (Total planned quantity) --> 0
PSMNG (ORDER QTY) --> 2000
Extract Structure is showing following data.
AUFNR (Order Number) --> 4000460
PGMNG (Total planned quantity) --> 2000 (It should be zero)
PSMNG (ORDER QTY) --> 2000
I have checked with many other order numbers. The extract structure in RSA3 is showing correct values only if PGMNG is non-zero values. If PGMNG is zero, then it is automatically assigning PSMNG value.
Is this common? I want to display correct values for PGMNG from AFPO Table. Why this mismatch between table data and extract data. I have done all required steps refreshing data (deleting setup tables, filling set up tables etc.).
pls suggest. Poinsts will be assigned to every useful answer.
Thanks in advance.

Hi Avneet,
I have a similar problem where in AFPO shows value 1000 in PSMNG field and 1200 in RSA3 for extractor 2LIS_04_P_MATNR.
I have found that the standard feature of the extractor extracts the data at the time of release of process order. If the process order is changed after the release then the extractor will not picup the chagne.
Ex: AFPO value 1000 ---BI Value 1000
Now released in ECC
AFPO value 1000 ---BI Value 1000
In ECC value changed to 1500 after the release. BI will not pickup the change.
Extractor is pulling the data from MCAFPOV table. You can check the values, there it matches with RSA3 values.
I was just going thru forums for the solution. After i found the solution. I am just updating it.
Hope it helps you.
Thaks
Srikanth

Similar Messages

Data mismatch between 10g and 11g.

Hi
We recently upgraded OBIEE to 11.1.1.6.0 from 10.1.3.4.0. While testing we found data mismatch between 10g and 11g in-case of few reports which are including a front end calculated column with division included in it, say for example ("- Paycheck"."Earnings" / COUNT(DISTINCT "- Pay"."Check Date")) / 25.
The data is matching for the below scenarios.
1) When the column is removed from both 10g and 11g.
2) When the aggregation rule is set to either "Sum or Count" in both 10g and 11g.
It would be very helpful and greatly appreciated if any workaround/pointers to solve this issue is provided.
Thanks

jfedynic wrote:
The 10g and 11.1.0.7 Databases are currently set to AL32UTF8.
In each database there is a VARCHAR2 field used to store data, but not specifically AL32UTF8 data but encrypted data.
Using the 10g Client to connect to either the 10g database or 11g database it works fine.
Using the 11.1.0.7 Client to go against either the 10g or 11g database and it produces the error: ORA-29275: partial multibyte character
What has changed?
Was it considered a Bug in 10g because it allowed this behavior and now 11g is operating correctly?
29275, 00000, "partial multibyte character"
// *Cause: The requested read operation could not complete because a partial
//          multibyte character was found at the end of the input.
// *Action: Ensure that the complete multibyte character is sent from the
//          remote server and retry the operation. Or read the partial
//          multibyte character as RAW.It appears to me a bug got fixed.

Data Mismatch between ODS and Infocube

Hi,
I have got data mismatch between from ODS to Infocube. In ODS for one Sender Cost Centre, there is only one Company Code. In Infocube it is showing many.For ODS datasource is 0HR_PT_1. In Updaterules of ODS, Company Code was assigned to Company Code. But in Infocube should I assign CompCode to Comp Code or any other Characteristic as Master Data Attr of. Plz suggest us.
It is very urgent.

post ur BW related querures in BW forum

PPDS production order dates mismatch between APO and R3

Hi Friends,
We are facing one problem regarding production order date mish match between R3 and APO systems specific to a product.
The product is planned in PPDS and the order automatically transfer to R3 through online CIF.
PPM has got two operations 0010 and 0020 and activity relationships are like this:
P(0010) - P(0020) Start - Start relation ship
S(0010) - P(0010) End - Start relationship.
In PPDS dates are shown as :
on operation 0010 the start/end dates are shown as 08.15.09 to 08.22.09
on operation 0020 the start/end dates are shown as 08.15.09 to 08.22.09
Overall order start date is 08.15.09
Overall order finish date is 08.22.09
and in R3 dates are shown as:
on operation 0010 the start/end date are shown as 08.15.09 to 08.22.09
on operation 0020 the start/end dates are shown as 08.22.09 to 08.29.09
Overall order start date is 08.15.09
Overall order finish date is 08.29.09
The order is off one week (APO vs R3) with start and finish dates.
if we change DS Board settings to ignore internal relationships manually then the dates are matching exactly in APO and R3.
We want the production order dates to be matched without manual intervention.
Could some one please provide some hints on what is happening here and how to correct it.
Thanks.
Krish

Hi Friends,
Thanks a lot for your valuable replies in this regard.
Actually this problem is in production environment and it took some time to test the problem with the master data modifications
you suggested.
As DB and Siddhrath mentioned, the problem was with routing definition. There is no parallel sequence maintained in the routing but there is start-start relation maintained in APO PPM.
We corrected the routing definition and checked the order dates. Now the dates are matching in R3 and APO.
I am awarding DB and Siddharth each five points in this regard.
Once again thank you all for your time and valuable replies.
-Regards
Krish.

Data mismatch between dashboard and bw report

Hi expert,
Data is mismatchin between dashboard and BW report of .I am using SAP BW connection ,
Dashboard screen shot
BW Query output
What is the issue can you please suggest...

Hi Ganapathy,
Please check the Prompt filter and Variables which you are passing to get the output in Dashboard and BW.
It seems that some filters are missing in dashboard.
Thanks
Arvind Shukla

Data mismatching between BW and R/3

Hi BW Experts,
We uploaded Profit Center Accounting Data (It is a Part of CONTROLLING) on 10-04-2008.
And we run the delta daily, it is running fine....
Yesterday we checked the data for one GL Account in both R/3 and BW Systems, but data is not matching.
There are 4 line items (4 Different Amounts) in R/3 side, but we got only 3 line items (3 Amounts) in BW side.
One amount (line item) was missed.
How can i get the missing value in BW side.
We are not using ODS...
It is very urgent.
PLease can anyone tell me the solution.
Regards
Anjali

You should do the following checks:-
1. RSA3 - Extractor Checker
2. RSA7 - Delta Queue Monitoring - to check what is entering the delta queue
(hopefully these would be ok, if there are not much customisations etc..)
3. PSA - Check if there are any selection conditions stopping data from coming to PSA, If you find all data here perfect, then there has to be some issue with the staging etc.
4. If you are on Bi7.0, switch on the temp. storage and then execute your DTP, so that you can check the processing by record.. also check the DTP filters - which might be stopping some data to be processed.
5. Transformation (transfer rules/update rules) - Check for some routines - start routines, end routines which may stop some data to be processed.
6. Last but not the least, you should also check if there is some aggregation that happens in the cube which stops you from seeing the data distinctly.
Hope this helps.
Cheers,
Sumit

How to identify the data mismatch between inventory cube and tables?

Hi experts,
i have a scenario like how to identify the data mismatch between 0IC_C03 and tables,and what are the steps to follow for avoiding the data mismatch

Hi
U can use data reconcilation method to check the consistency of data between the r/3 and bw. Plz check the below link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0931642-1805-2e10-01ad-a4fbec8461da?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d08ce5cd-3db7-2c10-ddaf-b13353ad3489
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7a5ee147-0501-0010-0a9d-f7abcba36b14?QuickLink=index&overridelayout=true
Thanx & Regards,
RaviChandra

Extract data from database tables and download in pdf and csv

extract data from database tables and download in pdf and csv
hi how can i re-write my old form procedure in adf java. the procedure used to extract data from diffirent table and dowload the data in pdf and csv.am not downloading image, i what to extract data from diffirent tables in my database and download that data in pdf and csv. i would like to write this in java adf.i just what direction am not asking anyone to do my work this is my learning curve
the form code is
function merge_header3 return varchar2 is
begin
 return '~FACILITY DESCRIPTION~ACCOUNT NO~BRANCH CODE~BANK REF NO.~P/P/ AMOUNT~Postal Address 1~Postal Address 2~Box Postal Code~Dep. Date~Month~BANK NAME~BRANCH NAME~ACCOUNT TYPE~DESCRIPTION~OBJECTIVE DESCRIPTION';
end;
procedure download_file (i_pbat integer) is
dir varchar2(80);
file_name1 varchar2(80);
file_name2 varchar2(80);
appl_code varchar2(80);
fil1 client_text_io.file_type;
fil2 client_text_io.file_type;
dat varchar2(1000);
DATA VARCHAR2(1000);
bvspro varchar2(100);
ssch varchar2(100);
bvspro_total number(20,2);
ssch_total number(20,2);
grand_total number(20,2);
cnt integer;
cursor pbat is
 select *
 from sms_payment_batches
 where id = i_pbat
cursor pay (pb_id integer) is
 select *
 from sms_payment_vw
 where pbat_id = pb_id
 order by subsidy ASC,programme,beneficiary_name
cursor cgref (low varchar2) is
 select *
 from cg_ref_codes
 where rv_domain ='SMS'
 and rv_low_value = low
success boolean;
begin
 set_application_property(cursor_style,'busy');
 appl_code := sms_global.ref_code('SMS','APP_CODE','SMS',0);
 dir := sms_global.ref_code('SMS','PAY_DIR','c:\sms\batch_payments',0);
 success := webutil_file.create_directory(dir);
 if webutil_file.file_is_directory(dir) then
 null;
-- message ('directory exists');
 else
-- message ('create directory ');
 success := webutil_file.create_directory(dir);
-- if success then message ('directory exists'); end if;
 end if;
 for c_pbat in pbat loop
 file_name1 := dir ||'\' || appl_code||c_pbat.batch_number||'-'||to_char(c_pbat.batch_dt,'yyyymmdd')||'pay.txt';
 file_name2 := dir ||'\' || appl_code||c_pbat.batch_number||'-'||to_char(c_pbat.batch_dt,'yyyymmdd')||'merge.txt';
--message('create files ');
-- fil1 := client_text_io.fopen (file_name1,'W');
-- fil2 := client_text_io.fopen (file_name2,'W');
 fil1 := client_text_io.fopen (file_name1,'W','');
 fil2 := client_text_io.fopen (file_name2,'W','');
 dat := 'FROM ACCOUNT NUMBER'
 ||'~'||'FROM ACCOUNT DESCRIPTION'
 ||'~'||'MY STATEMENT DESCRIPTION'
 ||'~'||'BENEFICIARY ACCOUNT NUMBER'
 ||'~'||'BENEFICIARY SUB ACCOUNT NUMBER'
 ||'~'||'BENEFICIARY BRANCH CODE'
 ||'~'||'BENEFICIARY NAME'
 ||'~'||'BENEFICIARY STATEMENT DESCRIPTION'
 ||'~'||'AMOUNT';
 -- client_text_io.put_line(fil1,dat);
 bvspro:= null;
 ssch := null;
 cnt := 0;
 dat := '~'||lpad('~',16,'~');
 for c_pay in pay(c_pbat.id) loop
--message('cpay loop ' || cnt);
 if bvspro is null then
 dat := lpad('~',16,'~');
 dat := utility.put_field(1,c_pay.programme,dat,'~');
 client_text_io.put_line(fil2,dat);
 dat := utility.put_field(1,c_pay.subsidy,dat,'~');
 client_text_io.put_line(fil2,dat);
 dat := merge_header3;
 client_text_io.put_line(fil2,dat);
 bvspro := c_pay.programme;
 ssch := c_pay.subsidy;
 grand_total := 0;
 bvspro_total := 0;
 ssch_total := 0;
 end if;
 if bvspro <> c_pay.programme then
 dat := lpad('~',16,'~');
 dat := utility.put_field(5,ssch_total,dat,'~');
 dat := lpad('~',16,'~');
 dat := utility.put_field(5,bvspro_total,dat,'~');
 dat := utility.put_field(1,'Total:' || bvspro,dat,'~');
 client_text_io.put_line(fil2,dat);
 dat := lpad('~',16,'~');
 client_text_io.put_line(fil2,dat);
 dat := utility.put_field(1,c_pay.programme,dat,'~');
 client_text_io.put_line(fil2,dat);
 bvspro := c_pay.programme;
 dat := utility.put_field(1,c_pay.subsidy,dat,'~');
 client_text_io.put_line(fil2,dat);
 dat := merge_header3;
 client_text_io.put_line(fil2,dat);
 bvspro := c_pay.programme;
 ssch := c_pay.subsidy;
 bvspro_total := 0;
 ssch_total := 0;
 cnt :=0;
 end if;
 if ssch <> c_pay.subsidy then
 dat := lpad('~',16,'~');
 dat := utility.put_field(5,ssch_total,dat,'~');
 dat := lpad('~',16,'~');
 client_text_io.put_line(fil2,dat);
 dat := utility.put_field(1,c_pay.subsidy,dat,'~');
 client_text_io.put_line(fil2,dat);
 dat := merge_header3;
 client_text_io.put_line(fil2,dat);
 ssch := c_pay.subsidy;
 ssch_total := 0;
 cnt :=0;
 end if;
 bvspro_total := bvspro_total + c_pay.amount;
 ssch_total := ssch_total + c_pay.amount;
 grand_total := grand_total + c_pay.amount;
 cnt := cnt +1;
--message('bfore write file 2 ' );
 client_text_io.put_line(fil2
 ,cnt
 ||'~'|| c_pay.beneficiary_name
 ||'~'||c_pay.BENEFICIARY_ACCOUNT_NUMBER ||''
 ||'~'||c_pay.BRANCH_CODE ||''
 ||'~'|| c_pay.BENEFICIARY_STATEMENT_DESC
 ||'~'|| c_pay.AMOUNT
 ||'~'|| c_pay.address_line1
 ||'~'|| c_pay.address_line2
 ||'~'|| c_pay.postal_code
 ||'~'|| TO_CHAR(c_pay.deposit_date,'DD-Mon-YYYY')
 ||'~'|| c_pay.month
 ||'~'|| c_pay.bank
 ||'~'|| c_pay.bank_branch
 ||'~'|| c_pay.account_type
 ||'~'|| c_pay.subsidy
 ||'~'|| c_pay.programme)
 DATA := c_pay.FROM_ACCOUNT_NUMBER
 ||'~'||c_pay.FROM_ACCOUNT_DESCR
 ||'~'||c_pay.MY_STATEMENT_DESCR
 ||'~'||c_pay.BENEFICIARY_ACCOUNT_NUMBER
 ||'~'
 ||'~'||c_pay.BRANCH_CODE
 ||'~'||c_pay.BENEFICIARY_NAME
 ||'~'||c_pay.BENEFICIARY_STATEMENT_DESC
 ||'~'||c_pay.AMOUNT;
 DATA := REPLACE(DATA, ',' , ' ' );
 DATA := REPLACE(DATA, '~' , ',' );
--message (cnt ||' ' || data);
--message('bfore write file 1 ' );
 client_text_io.put_line(fil1, data);
 end loop;
--message ('end of write');
 dat := lpad('~',16,'~');
 dat := utility.put_field(6,ssch_total,dat,'~');
 dat := lpad('~',16,'~');
 dat := utility.put_field(1,'Total:' || bvspro,dat,'~');
 dat := utility.put_field(5,bvspro_total,dat,'~');
 client_text_io.put_line(fil2,dat);
 dat := lpad('~',16,'~');
 client_text_io.put_line(fil2,dat);
 dat := utility.put_field(1,'Grand Total:' ,dat,'~');
 dat := utility.put_field(5,grand_total,dat,'~');
 client_text_io.put_line(fil2,dat);
 -- close file
for i in 1..50 loop
 if substr(i,-1) = 0 then
 message ('flush ' || i);
 end if;
 client_text_io.put_line(fil1, lpad(' ',2000));
 client_text_io.put_line(fil2, lpad(' ',2000));
 client_text_io.put_line(fil1, lpad(' ',2000));
 client_text_io.put_line(fil2, lpad(' ',2000));
end loop;
 client_text_io.fclose(fil1);
 client_text_io.fclose(fil2);
 end loop;
 set_application_property(cursor_style,'default');
 exception
 when others then
 message(sqlcode ||' ' ||sqlerrm);
 end download_file; i try this but this code onlydownload image not data from database tables
 public void downloadImage(FacesContext facesContext, OutputStream outputStream)
 BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
 // get an ADF attributevalue from the ADF page definitions
 AttributeBinding attr = (AttributeBinding) bindings.getControlBinding("DocumentImage");
 if (attr == null)
 return;
 // the value is a BlobDomain data type
 BlobDomain blob = (BlobDomain) attr.getInputValue();
 try
 { // copy the data from the BlobDomain to the output stream
 IOUtils.copy(blob.getInputStream(), outputStream);
 // cloase the blob to release the recources
 blob.closeInputStream();
 // flush the output stream
 outputStream.flush();
 catch (IOException e)
 // handle errors
 e.printStackTrace();
 FacesMessage msg = new FacesMessage(FacesMessage.SEVERITY_ERROR, e.getMessage(), "");
 FacesContext.getCurrentInstance().addMessage(null, msg);
 }

You should ask your forum in the ADF-forum.

Data mismatch between two clients

Hi,
I have a query on data mismatch between two clients.
For eg assume a functional consultant would have configured intially some 5 custom document types and captured that in a transport request (TR1234) and promoted from one system/client (in my case QG1/821) to another system/client (say QG4/821). Again he would have configured another 3 custom document types and put in a transport request (TR4567) and promoted it. The transport request TR4567 some how did not reach QG4/821. Hence it shows only 5 records in T003 table (document types table) in QG4/821 and 8 records in QG1/821. How do we identify which is the correct transport (in this case TR4567), so that this transport can be promoted to QG4/821, so that both QG1/821 and QG4/821 are in sync.
Similary such a discrepancy exists for custom tables also. I am not able to catch hold of any basis people for inputs on this. Hence pls advise.
Regards
Vimal Kumar

development objects can be compared using, Compare the active versions in both the system. (Use remote comparision)
But this you have to maually check.

Difference between LO and Fi extraction

Hi,
What are major differences between FI and LO extraction?
Sridhar

Hi,
FI provides direct data extraction that mean you can load data without filling any setup tables in R3 side however LO provides indirect data extraction and that requires to fill setup tables then you can loaddata into BW.Check this thread.
Diffrance between SD extraction and FI extraction
Regards.

Difference between LIS and Lo extraction

Hi,
Wat is the Difference between LIS and LO extraction.
Thanks,
Sanu

HI
One good difference between lis and los is
lis uses transparent tables where as los use cluster tables
ust some infos about LIS flows....
with Plug-In 2001.2 S2xx-Structures have been replaced by Logistics Extraction Cockpit. However, R/3 releases 4.x support S2xx-Structures and Logistics Extraction Cockpit in parallel.
With new LBWE extractors there are a lot of benefits:
- Detailed Extraction: extraction can be deactivated (e.g. Schedule Line Data) leads to leaner extractors with less volume.
- Document Changes: only BW-relevant data changes will be updated (less upload volume).
- LIS-Tables are not updated reduced data volume due to avoided redundancy.
- Update with Batch-Process (V3) -> no load on daily business (but now there are available different delta methods as the direct delta...)
- No LIS-Know How necessary.
- Functional Enhancements easy to be done.
- Central, uniform maintenance tool for logistics applications (LBWE)
- No Delta-Tables (SnnnBIW1/-2) no double update, no double Data-Storage
- A lot of flows are covered: Purchasing,Inventory Controlling, Shop Floor Control, Quality Management, Shipment, Sales, Shipping, Billing, Plant Maintenance, Customer Service,
hope this helps

How to maintain gap between table and graph in a report

HI,
I have a report in which a graph is placed below a table and data in the table gets increased with time , then how to maintain the gap as constant between table and the graph ?? Like i have 50 rows in a table and then next day 10 rows are added but then i want maintain same gap between the table and graph???

>Right click on chart.
>Open the property and go to the relative position.
>Select the distance of the upper left point of the chart in relation to another report element by entering - the number of pixels; the part of the tavfrom which youble want to measure the pixels (in the first drop-down list); the report element from which you want to measure the pixels (in the second drop-down list).
>Repeat this for the distance of the lower left point of the chart.
Hope this will help you out.

The Relation between tables and views in oracle financial

Dears
I am work in oracle e business r12
and i need to build report as xml
when run my select its need big time to view data i have a huge of data so i need to clear the relation of this tables if there is miss and if there another technique in select statement
this is my select statement
select
j_hdr.je_header_id je_header_id,
hdr.VENDOR_NAME supplier,
SEGMENT1||'-'||SEGMENT2||'-'||SEGMENT3||'-'||SEGMENT4||'-'||SEGMENT5||'-'||SEGMENT6||'-'||SEGMENT7||'-'||SEGMENT8||'-'||SEGMENT9 Account_number,
hdr.gl_date gl_date,
j_hdr.CURRENCY_CODE CURRENCY_CODE,
inv_lin.DESCRIPTION DESCRIPTION,
j_lin.ENTERED_DR ENTERED_DR,
j_lin.ENTERED_CR ENTERED_CR,
j_lin.ACCOUNTED_DR ACCOUNTED_DR,
j_lin.ACCOUNTED_CR ACCOUNTED_CR,
j_hdr.JE_SOURCE JE_SOURCE,
j_hdr.DEFAULT_EFFECTIVE_DATE Transaction_DATE,
hdr.INVOICE_NUM INVOICE_NUM,
QUICK_PO_NUMBER PO_NUMBER,
null ASSET_CATEGORY_ID,
hdr.VENDOR_ID VENDOR_ID
from gl_je_headers j_hdr,gl_je_lines_v j_lin,ap_invoice_distributions dist,ap_invoices_v hdr,ap_invoice_lines_v inv_lin
where code_combination_id = DIST_CODE_COMBINATION_ID
and hdr.invoice_id = inv_lin.INVOICE_ID
and dist.invoice_id = inv_lin.INVOICE_ID
and j_hdr.JE_HEADER_ID = j_lin.JE_HEADER_ID
and j_hdr.status = 'P'
and nvl(:P_SOURCE,'Payables') = 'Payables'
and je_source = 'Payables'
and j_lin.CODE_COMBINATION_ID between ( select CODE_COMBINATION_ID
from gl_code_combinations_kfv
where CONCATENATED_SEGMENTS = :P_FROM_COMBINATION_CODE)
and ( select CODE_COMBINATION_ID
from gl_code_combinations_kfv
where CONCATENATED_SEGMENTS = :P_TO_COMBINATION_CODE)
AND TRUNC(dEFAULT_EFFECTIVE_DATE) BETWEEN NVL(:P_FROM_DATE, DEFAULT_EFFECTIVE_DATE) AND NVL(:P_to_DATE, DEFAULT_EFFECTIVE_DATE)
Thanks in advance

Welcome to the world of complicated Oracle Application queries. Didn't fully understand your question, so a few guesses -
I think that you are asking how to make your query faster? I would reference the FAQ section on how to post a question regarding performance.
Your title indicates you want to understand the relationship between tables and views. In general, Oracle Applications uses views for 2 reasons - to join data from multiple tables for display, and to differentiate data from different organizations. (I am still on 11i and have heard organizations are handled differently in 12 so I can't speak to that for sure).
To understand the relationship between tables in a view, you can access the view's source code, either through a development tool such as PL/SQL Developer or TOAD (I'm guessing Oracle's tool does this also, but have never used it), or by querying the source from the dba_source table.
select * from dba_source where name = (name of view) and type = 'VIEW' order by line;without the ( ) just the view name, in all capital letters i.e. , 'GL_JE_LINES_V'
Good luck!

Data Replication Between Sqlserver and Oracle11g using materialized view.

I have Sqlserver 2005 as my source and oracle11g as my target.I need to populate the target daily with change data from source.
for that we have created a dblink between sqlserver and oracle and replicated that table as a Materialized view in Oracle.
problem we are getting here is Fast refresh option is not available.each day it will pick full data from the source.
is there any way to use Fast refresh in this scenario??
Thanks in advance.
Regards,
Balaram.

Pl do not post duplicates - Data Replication Between Sqlserver and Oracle11g using materialized view.

Hi guru's what is the difference between table and temlate in smartforms

hi guru's what is the difference between table and temlate in smartforms

Hi Vasu,
Template is used for proper allignment of data which table is used for displaying multiple data.
We can say Template is for static data and Table is for dynamic data.
Suppose we have a requirement in which we have to allign the customer address in such a way as shown below:-
Name- Vasu Company- WIPRO Location- Chennai
Desig- S/W Native - Mumbai
Then for proper allighnment we can create a template and split that into 3 columns and 2 rows and create text elements for each cell display a proper allighned data at the output.
When we include a template inside a loop it gives the same property as a table.
When we have mutiple data which is to be extended to the next page like when we display all employee details in a company we use table.
Table has 3 sections , HEADER, ITEM ,FOOTER
The header secntion will be executed once and it will loop at the item level. at the end footer will be executed.
Hope this gives u some idea..
Please reward if useful
Regards,
sunil kairam.

Data mismatch between TABLE and Std. Extract str. (AFPO & 2LIS_04_P_MATNR)

Similar Messages

Maybe you are looking for