Ps CS6 (non CC): Field Blur: no pins
Hello
I just noticed recently that I have no pins/markers in any blur dialog (iris, field, whatever). I cannot remember whether I ever had any. I didn't use these new blur things until recently.
Comparing my GUI with a tutorial video showed me that there should be pins I can set (my mouse pointer turns into one) and adjust the amount of blur. I don't even see the first standard marker. I see nothing but a blurred picture. When I guess the position of pins I can adjust everything. So basically it works but I see no visible markers.
My system is 4 years old but I didn't have problems with it so far (been using CS6 for over a year):
CPU: AMD Phenom II X4 3,2 GHz
GPU: AMD Radeon HD 4770 - 512 MB RAM
OS: Windows 7 64bit Home Premium
Adobe Production Premium CS6
my software is always up-to-date (autoupdater active for everything)
I deactivated the GPU support, restarted photoshop but no difference.
Did anyone expierience something similar or has ever heard of it or knows a solution or can help to narrow the cause?
Regards,
Mopsi
Is "View > Show > Edit Pins" definitely enabled as below:
Similar Messages
-
Mac user, OSX 10.9.4. CS6, in the new Blur gallery the pin with adjusters does not appear for any of the three blur filters. This may have occurred since taking adobe watermark add-on and updating Bridge. any ideas?
I am using Mac OSX 10.10.1 (memory 8 GB 1600 MHz DDR3, graphics Nvidia GeForce GT 650M 1024 MB)
and my version of Photoshop is CC.
I ran into the same problem: I am able to place and view Blur Gallery pins but the adjustment wheel or outer control arounf the pin that allows you to tweak the blur value disappeared after being initially available. Additionally, the placed pin or pins appear to flicker on screen (while in blur gallery mode) until committing the change with the OK button. I have tried restarting both the computer and Photoshop, as well as what some other users have suggested such as View>Show>Edit pins turned on. Nothing has helped so far. I am still able to adjust the blur amount from the Blur Tools slider. thank you. -
No pin presents on an image when I open Blur/Field. The cursor displays a pin but when clicked on the image no pin is visually placed. Blur does occur when a pin is placed but no on image blur ring control presents. Also, when the image opens in Blur (with Field Blur checked) the Blur slider sets about a third over to the right so the image is pre-blurred. Is this a bug or have I overlooked some setting? Thanks for any help
camjc wrote:
No pin presents on an image when I open Blur/Field. The cursor displays a pin but when clicked on the image no pin is visually placed. Blur does occur when a pin is placed but no on image blur ring control presents.
When in Blur Gallery, ensure View > Show > Edit Pins is enabled.
Also, when the image opens in Blur (with Field Blur checked) the Blur slider sets about a third over to the right so the image is pre-blurred. Is this a bug or have I overlooked some setting?
That's normal and just the way it is. Mine is initialised at 15. -
Key fields and non-key field of condition table
Hello Gurus,
what is key fields and non-key field of condition table?
thanks very much!Key field
Each condition table contains keys that can be used for creating dependent condition records.
for example let take condition type PR00.
PR00 uses access sequence PR02 .
Access sequence PR02 has following tables associated with it namely 304, 305 & 306
When you create a conditon record for PR00 with transaction VK11 or VK31, you have a button 'key combination' which is nothing but fields associated with tables 304, 305 & 306.
In brief, Condition records are always created using specific keys. Condition tables are used to define the structure of the keys of a condition record.
Non key field
For example take condition table 144 - sales deal basic data.
Table 144 is associated with access sequence PBUD.
If you check the fields associated with this table (click technical view button), there are three fields at bottom which do not have 'key' check mark -KDATU, PLTYP, KSTAF
So, when you create a condition record for PBUD, system does not propose these 3 fields in 'key combination' and hence are non key fields.
Please reward points for good answers as this would help increase the total donation that SAP will make to the United Nations World Food Programme. -
Problem with Non-English Fields Output to PDF by JASPER in JDev10.1.3
I am using jsprx files(designed in i-report) to generate pdf reports out of an oracle database.
The non-English fields are shown correctly when I output the report into an HTML or when I view it with JasperView.
If I try making PDF files (JasperExportManager.exportReportToPdfFile) the static fields containing e.g.Arabic/Chineese characters won't be displayed and dynamic fields from the database with non-English contents will be shown as ??? or null.
I received some suggestions about using PARAMETERS to feed the report instead of FIELDS, which I think can not be helpful in this case and in general.
I think this should be a common problem. These are the components I am using:
itext-1.4.7. jar
commons-digester- 1.7.zip
jasperreports- 1.2.8.jar
Any comment or help is appreciated.
Thanks
FarbodI am using jsprx files(designed in i-report) to generate pdf reports out of an oracle database.
The non-English fields are shown correctly when I output the report into an HTML or when I view it with JasperView.
If I try making PDF files (JasperExportManager.exportReportToPdfFile) the static fields containing e.g.Arabic/Chineese characters won't be displayed and dynamic fields from the database with non-English contents will be shown as ??? or null.
I received some suggestions about using PARAMETERS to feed the report instead of FIELDS, which I think can not be helpful in this case and in general.
I think this should be a common problem. These are the components I am using:
itext-1.4.7. jar
commons-digester- 1.7.zip
jasperreports- 1.2.8.jar
Any comment or help is appreciated.
Thanks
Farbod -
How can we protect the ztable non key fields data in sm30 display.
Hi experts,
I have created tablemaintenence generator for one z table, in sm30 user has access to enter the data.
in that maintenence i have to protect the non key field values data like once the user saves his data.than in the edit mode it has to show the nonkey fields data but dont access to edit some nonkey fields... please helpHi
U need to change the screen flow generated by maintenance view generator: here go to Enviroments->Modifications->Screen; doubleclick on your screen and the system take you to screen painter.
Here go to screen flow and in PBO add new module in order to protect the field for the old records: u can use the statament LOOP AT SCREEN./ENDLOOP to do it.
LOOP AT SCREEN.
IF .....
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Max -
Error: "a summary has been specified on a non recurring field"
Hi,
I have a formula which calculates a quantity amount based on different quantity types & finally sums all the quantity to give a
result, tis result i want to show in crystal report, This field is put in report footer, when i try to run the report i get the following error for that field 'a summary has been specified on a non recurring field' below i put my formula:
//sum for qty type Fuel
numberVar qtyFuel;
if
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-THEO_ACT_IND]} = 'A' and
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-MEDIUM]} = 'GAS' and {2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-QTY_TYPE]-[22O0GHO_C06-QTY_TYPE]} = '01'
then
qtyFuel := Sum ({2O0GHO_C06_0GHO_T06_Q0002.[Measures]-[DWQWE23XXYJCROQ978M8NX3J5]});
//sum for qty type Inventory
numberVar qtyInventory;
if
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-THEO_ACT_IND]} = 'A' and
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-MEDIUM]} = 'GAS' and {2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-QTY_TYPE]-[22O0GHO_C06-QTY_TYPE]} = '03'
then
qtyInventory := Sum ({2O0GHO_C06_0GHO_T06_Q0002.[Measures]-[DWQWE23XXYJCROQ978M8NX3J5]});
//sum for qty type Non Sales
numberVar qtyNonSales;
if
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-THEO_ACT_IND]} = 'A' and
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-MEDIUM]} = 'GAS' and {2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-QTY_TYPE]-[22O0GHO_C06-QTY_TYPE]} = '04'
then
qtyNonSales := Sum ({2O0GHO_C06_0GHO_T06_Q0002.[Measures]-[DWQWE23XXYJCROQ978M8NX3J5]});
//sum for qty type Sales
numberVar qtySales;
if
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-THEO_ACT_IND]} = 'A' and
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-MEDIUM]} = 'GAS' and {2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-QTY_TYPE]-[22O0GHO_C06-QTY_TYPE]} = '05'
then
qtySales := Sum ({2O0GHO_C06_0GHO_T06_Q0002.[Measures]-[DWQWE23XXYJCROQ978M8NX3J5]});
//sum for qty type Enhanced Recovery
numberVar qtyEnhancedRecovery;
if
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-THEO_ACT_IND]} = 'A' and
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-MEDIUM]} = 'GAS' and {2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-QTY_TYPE]-[22O0GHO_C06-QTY_TYPE]} = '14'
then
qtyEnhancedRecovery := Sum ({2O0GHO_C06_0GHO_T06_Q0002.[Measures]-[DWQWE23XXYJCROQ978M8NX3J5]});
//sum for qty type Load Oil Sales
numberVar qtyLdOilSales;
if
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-THEO_ACT_IND]} = 'A' and
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-MEDIUM]} = 'GAS' and {2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-QTY_TYPE]-[22O0GHO_C06-QTY_TYPE]} = '08'
then
qtyLdOilSales := Sum ({2O0GHO_C06_0GHO_T06_Q0002.[Measures]-[DWQWE23XXYJCROQ978M8NX3J5]});
//sum for qty type receipt
numberVar qtyReceipt;
if
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-THEO_ACT_IND]} = 'A' and
{2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-MEDIUM]} = 'GAS' and {2O0GHO_C06_0GHO_T06_Q0002.[2O0GHO_C06-QTY_TYPE]-[22O0GHO_C06-QTY_TYPE]} = '13'
then
qtyReceipt := Sum ({2O0GHO_C06_0GHO_T06_Q0002.[Measures]-[DWQWE23XXYJCROQ978M8NX3J5]});
numberVar Total_Production;
//summing all quantity types
Total_Production := qtyFuel + qtyInventory + qtyNonSales + qtySales + qtyEnhancedRecovery + qtyLdOilSales - qtyReceipt;
I want to display the Total_Production in the report.
The formula name is: Total_Gas_Production.
kindly help me in this issue.
Regards,
Deepakis this one formula?
have you tried to run each formula seperatly to check which is the culprit. if you search the web there are some reasons why this could be happening.
generally you should use evaluation times on formulas
are you using manual running totals or this is the entire formula?
try
MANUAL RUNNING TOTALS
RESET
The reset formula is placed in a group header report header to reset the summary to zero for each unique record it groups by.
whileprintingrecords;
Numbervar X := 0;
CALCULATION
The calculation is placed adjacent to the field or formula that is being calculated.
(if there are duplicate values; create a group on the field that is being calculated on. If there are not duplicate records, the detail section is used.
whileprintingrecords;
Numbervar X := x + ; ( or formula)
DISPLAY
The display is the sum of what is being calculated. This is placed in a group, page or report footer. (generally placed in the group footer of the group header where the reset is placed.)
whileprintingrecords;
Numbervar X;
X -
I got an error while I creating a structure.
[FieldOffset(72)]
[MarshalAs(UnmanagedType.ByValArray,SizeConst= 3)]
public int[] DC;
[FieldOffset(75)]
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
public float[] WIN;
[FieldOffset(83)]
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 20)]
public byte[] name;
[FieldOffset(103)]
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 3)]
public byte[] SET;
[FieldOffset(106)]
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 50)]
public byte[] ID;
Error as like this-->object field at offset 75 that is incorrectly aligned or overlapped by a non-object field. But here size constant is 3 so I think after 72 offset will be 75..If I change the offset to 76 it will works fine. I think reason is that
size of int is 4. After changing that code will be like this.
[FieldOffset(72)]
[MarshalAs(UnmanagedType.ByValArray,SizeConst= 3)]
public int[] DC;
[FieldOffset(76)]
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
public float[] WIN;
[FieldOffset(84)]
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 20)]
public byte[] name;
[FieldOffset(104)]
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 3)]
public byte[] SET;
[FieldOffset(107)]
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 50)]
public byte[] ID;
But at that time I got the error as object field at offset 107 that is incorrectly aligned or overlapped by a non-object field..Can anyone tell me what is the main reason behind this..
Thanks..Hi,
Please firstly take a look at this documentation:
MarshalAsAttribute.SizeConst Field
Indicates the number of elements in the fixed-length array or the number of characters (not bytes) in a string to import
Change your code like this should work:
[FieldOffset(72)]
[MarshalAs(UnmanagedType.ByValArray,SizeConst= 3)]
public int[] DC;
[FieldOffset(84)]//72+4*3
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 8)]
public float[] WIN;
[FieldOffset(116)]//84+4*8
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 20)]
public byte[] name;
[FieldOffset(136)]
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 3)]
public byte[] SET;
[FieldOffset(139)]
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 50)]
public byte[] ID;
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Free Good Qty as non modifiable field in the Sales Order Level
Dear Friends,
I have successfully done the config change for the Free Goods, But now i want make the free good line item qty as a non modifiable field in the Sales Order Level.
How can i do this.. Please advice.
Thank U,
UwanthiHi
This is a standard behaviour in the system
kindly use the below program and user exitexit
MV45AFZZ and use "Userexit_filed_modification"
Regfards
Damu -
Changing Non key field to Key field in a custom table
Hello Abap gurus:
I have a requirement in which i need to change a non key field in my custom table(Z TABLE) to key field.
For example; i have field sequence as
field 1 key field
field 2 key field
field 3 key field
field 4 non-key field
field 5 non-key field
field 6 non-key field
field 7 non-key field.
i want to change field 7 as key field.
Can i do perform operation??
when i am tryingto perform bove operation it is taking long time to get the table activated.
Could any one please help me in getting this resolved.
regards,
Sravanthi.Use DB Utility (se14) to perform alter table or conversion. The latter is used when atemps to perform first operation fails. Which one is used, really depends on system and current DB table state (i.e. if has any content and what is being adjusted).
The way Max suggested is similar to [conversion process|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21f1b8446011d189700000e8322d00/content.htm] which system takes care of itself.
Refer [Adjusting Database Structures|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21f1ab446011d189700000e8322d00/content.htm] and already given link to conversion.
Please also consider potential errors while doing conversion . This can lead to data loss, so you should think of some backup to prevent that.
Regards
Marcin -
-- SQL -- GROUP BY clause: non-aggregate fields mandate
Hello,
I was studying Databases, (particularly the retrieval of the data), and found something interesting.
While using an Aggregate Function in the SELECT clause, it is mandatory to have all the non-aggregate fields in the SELECT clause to be there in the GROUP BY clause.
For example,
SELECT dept_no, SUM(salary)
FROM employee
GROUP BY dept_no;
The above SQL works fine.
But, what if the user misses the dept_no in the GROUP BY clause or he/she misses the GROUP BY clause itself?
Certainly, it is an error.
Why is this error not handled by the database. I mean, the database should be smart/intelligent enough to add the GROUP BY clause by itself. So suppose, if I miss out the GROUP BY clause or miss a non-aggregate field from the SELECT clause when I am having at least one aggregate function on a field with at least one non-aggregated field in the SELECT clause, the database should check the GROUP BY clause at time of compilation and add the mandate missed out fields in the GROUP BY clause.
Example,
SQL1:_
SELECT dept_no, SUM(salary)
FROM employee
GROUP BY dept_no;
SQL2:_
SELECT dept_no, SUM(salary)
FROM employee;
Here, the SQL1 and SQL2, both should give me same outputs without an error.
I am unable to understand why is this not handled?Hi,
998478 wrote:
... If we mix aggregate and non-aggregate values then there must be a GROUP BY clause containing all the non-aggregate values. Why is this not handled by the database/compiler itself? It IS handled by the compiler itself. The compiler handles it by raising an error. The compiler has no way of knowing whether you want to remove something from the SELECT clause, or to add something to the GROUP BY clause, or not to use aggregate functions, or to use more aggregate functions, or some combination of the above. If the compiler re-wrote your code, and did any of these things automatically, it would be wrong more often than it was right, and you would (rightly) be complaining about its behavior.
For example, this is clearly wrong:
SELECT deptno
, job
, SUM (sal)
FROM scott.emp
GROUP BY deptno
;What is the right way to fix it?
<h3>1. Remove something from the SELECT clause</h3>
SELECT deptno
, SUM (sal)
FROM scott.emp
GROUP BY deptno
;<h3>2. Add something to the GROUP BY clause</h3>
SELECT deptno
, job
, SUM (sal)
FROM scott.emp
GROUP BY deptno
, job
;<h3>3. Not use aggregate functions</h3>
SELECT deptno
, job
, sal
FROM scott.emp
;<h3>4. Use more aggregate functions</h3>
SELECT deptno
, MIN (job)
, SUM (sal)
FROM scott.emp
GROUP BY deptno
;These aren't all the options, either. For example, the correct fix might be to use analytic functions instead of aggregate functions.
How can anybody say which of these is right? All of them are the right answer for some problem.
By the way, saying that everying in the SELECT clause must be an aggregate or in the GROUP BY clause is a bit over-simplified.
More completely, here are the ABC's of GROUP BY:
When you use a GROUP BY clause and/or an aggregate function, then everything in the SELECT clause must be:
(A) an <b>A</b>ggregate function,
(B) one of the "group <b>B</b>y" expressions,
(C) a <b>C</b>onstant, or
(D) something that <b>D</b>epends entirely on the above. (For example, if you "GROUP BY TRUNC(dt)", you can SELECT "TO_CHAR (TRUNC(dt), 'Mon-DD')").
Edited by: Frank Kulash on Apr 13, 2013 1:44 PM
Added code examples. -
How to separate non metric fields in Fact tables
Hi All,
I am having metric fields along with some non metric fields in fact tables(All the fields has to be present in fact table only). Is it possible to group all non aggregated fields and aggregated fields in the same fact tables. Please advise.
regards,
Gurucheck this
OBIEE, Endeca and ODI: Fact and Dimension from single source Table
Thanks,
Saichand -
Hi,
I am using the following code.
Tables : vbap.
DATA: t_vbap TYPE STANDARD TABLE OF vbap,
x_vbap TYPE vbap.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS: s_vbeln FOR vbap-vbeln.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
SELECT * FROM vbap
INTO TABLE t_vbap
WHERE vbeln IN s_vbeln.
LOOP AT t_vbap INTO x_vbap.
at new vbeln.
write:'new vbeln'.
ENDAT.
ENDLOOP.
In debugging mode, the non-numeric fields on x_vbap becomes ****
I want to know whether this can be done using oops.. any methods available for at new
Moderator message: please search for available information/documentation before asking (as you can tell from some of the replies so far)
locked by: Thomas Zloch on Oct 1, 2010 3:25 PMsee documentation:
"If the INTO addition is used in the LOOP statement to assign the content of the current line to a work area wa, its content is changed upon entry into the AT-ENDAT control structure as follows:
The components of the current control key remain unchanged.
All components with a character-type, flat data type to the right of the current control key are set to character "*" in every position.
All the other components to the right of the current control key are set to their initial value.
When the AT-ENDAT control structure is exited, the content of the current table line is assigned to the entire work area wa. " -
How can we hide the non key field values in the sm30 display
hello experts,
I have to protect the non key field values in the sm30 display , can u help me out wat changes i have to do in the layout.Hello Gopal,
What do you mean by 'protecting' your non-key field value?
1) You want to display it, but make it non-changeable
A - Make the field as output-only in screen, as already answered by a preivous collegue
2) You do not want to display this field at all
A - Goto the DDIC definition of the view (not possible for a table directly), and maintain the required field as a Hidden. After activating, remember to re-generate the maintenance dialogue. Also, please maintain Event 21, in case you want to access/change the value of this field in background.
3) You want to maintain special validations/checks for the field
This can be easily done by introducing your modules within the CHAIN-FIELD commands in the PAI of the generated screens.
Best Regards,
Rekha -
Update non-editable field Start date which is calculated from other context
I had created some custom date fields(model, bol entity) in component ICCMP_BTSHEAD. We are calculating Start date based on the new input value into receiving date in the other context node.
so, for this i get the value on controller class(_IMPL). and pass the same value in the GET method of Start date.
But, Problem is Start date is the non-editable field so SET method will not be trigger as expected. so the same i used the DO_PREPARE_OUTPUT method but it's called and update the value when we press the enter. IF directly we click on the "SAVE" button then it' trigger but value is not updating in the database.
Please, find the below piece of code for the same. can u please anybody help me that how can i achieve this requirement.
DATA: l_recieve_date TYPE crmt_date_timestamp_from,
lr_current TYPE REF TO cl_bsp_wd_mixed_node,
lr_col TYPE REF TO cl_bsp_wd_collection_wrapper.
DATA: lv_date TYPE d,
lv_time TYPE t,
lv_date_temp TYPE sydatum.
IF iv_first_time EQ abap_false. "avoid for first tile load
Read the value of btreceivedate-TIMESTAMP_FROM.
lr_col = me->ztyped_context->btreceivedate->get_collection_wrapper( ).
IF lr_col IS BOUND.
lr_current ?= lr_col->get_current( ).
IF lr_current IS BOUND.
lr_current->if_bol_bo_property_access~get_property_as_value( EXPORTING iv_attr_name = 'TIMESTAMP_FROM'
IMPORTING ev_result = l_recieve_date ).
ENDIF.
ENDIF.
IF l_recieve_date IS NOT INITIAL.
CONVERT TIME STAMP l_recieve_date TIME ZONE sy-zonlo
INTO DATE lv_date TIME lv_time.
Check day is working day - if not, correct to previous working day
IF lv_date IS NOT INITIAL.
lv_date_temp = lv_date.
CALL FUNCTION 'DATE_CONVERT_TO_FACTORYDATE'
EXPORTING
correct_option = '-'
date = lv_date
factory_calendar_id = 'GB'
IMPORTING
date = lv_date_temp
EXCEPTIONS
date_after_range = 1
date_before_range = 2.
IF sy-subrc IS INITIAL.
lv_date = lv_date_temp.
ENDIF.
ENDIF.
CONVERT DATE lv_date TIME lv_time
INTO TIME STAMP l_recieve_date TIME ZONE sy-zonlo.
ENDIF.
lr_col = me->ztyped_context->btstart->get_collection_wrapper( ).
IF lr_col IS BOUND.
lr_current ?= lr_col->get_current( ).
IF lr_current IS BOUND.
lr_current->if_bol_bo_property_access~set_property(
iv_attr_name = 'APPT_TYPE' "#EC NOTEXT
iv_value = 'ZSTWTIME0001' ).
lr_current->if_bol_bo_property_access~set_property(
iv_attr_name = 'TIMESTAMP_FROM' "#EC NOTEXT
iv_value = l_recieve_date ).
ENDIF.
ENDIF.
ENDIF.
could you please help me?Hi,
Thanks for your reply,
yes, i checked the same thing also. But DO_HANDLE_DATA is called before the SET method of receiving date and in that case we are getting the old value in DO_HANDLE _DATA and source and Target fields both are not updating.
I checked, if, i'll change the input field then set method of input field and then EH_ON_SAVE is called directly.
i think, if i'll do the same modification in the EH_ON_SAVE method as i did in the DO_PREPARE_OUTPUT then it can be updated but i don't want to change the EH_ON_SAVE at this moment.
is there any other way to update the START DATE(Display mode in the screen) which is calculate from the other context node field receiving date.
Maybe you are looking for
-
Resolution problems with Adobe Reader XI using high resolution screens?
Hey, I am using the new Samsung Ativ Book 9 plus with a high resolution screen of 3200x1800 pixels. Unfortunately Adobe Reader XI shows menu bars in minimal sizes and I can't find any way to change this. Does anybody know if there is a solution for t
-
"iTunes can not run because some of the required fields are missing. Please reinstall iTunes." What the ****? Please help me figure this out. I already removed quicktime (as another thread suggested). I can't get in!
-
Withdrawing a Publication - E-Recruiting
Hi gurus, Help Sap says: Withdrawing a Publication Use You can withdraw publications that you have published in your intranet or in the Internet. The associated job posting is then no longer visible to candidates. You can also withdraw publications
-
Anyone know anything about getting links to open in emails? It's as though links are just not responding.. Have tried settings/general/restrictions and enabling / disabling but to no avail.
-
Artwork - Why Can't I get It?
I've just purchased an iPod Video and imported all my CD's but cannot get the artwork for many of the albums. The list includes The Beatles, The Rolling Stones, T.Rex and many others. Can someone tell me why, please? I've enabled 'Automatically downl