PSC 2410- How to clear fax report
I have a HP PSC 2410 All in one printer. I cannot find how to clear the fax report. Thanks in advance.
This question was solved.
View Solution.
Hello @thelildago!
Thank you for posting on the HP Forums!
I can see that you would like to clear the fax log in your Photosmart PSC 2410 printer. I should be able to provide steps on how to do that. On the printer there is no actual option to clear the fax log. You can however restore defaults in the printer and it should clear the fax log. I was able to locate the instructions for that in the PSC 2410 User Guide on Page 89.
To restore defaults:
Thanks again for posting on the HP Forums!
Please post back and let me know if this worked for you!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Similar Messages
-
How to clear the report from Cache.
Hello all,,,
In my project iam using crystsal report for eclipse to generate reports.
Iam using a .jsp page to call my report.(which i got it from the examples of CRE).
The name of my jsp page is poi.jsp
The name of my Crystal report is Department.rpt
My problem is this....
when i run the report first time i can see my poi.jsp page and user can submit
the parameter and based on the users parameter the report is generated..(ITs working absoultely fine)
but when the user runs the report again, its not showing the parameter page (i.e user cannot see poi.jsp)
rather its showing the old generated report.
When i tried using session.invalidate and session.removeAttribute it was showing me the poi.jsp page
but the problem is when the user clicks on the print icon or any icon on the report its just
showing the poi.jsp page...
When the user closes the report or when the clicks on the button to generate the report it should
show the parameter page (poi.jsp).how can i solve this problem???
the code what i am using is as follows
try {
String reportName = "C:/workspace/Reports/WebContent/Department.rpt";
ReportClientDocument clientDoc = (ReportClientDocument) session.getAttribute(reportName);
if (clientDoc == null) {
// Report can be opened from the relative location specified in the CRConfig.xml, or the report location
// tag can be removed to open the reports as Java resources or using an absolute path
// (absolute path not recommended for Web applications).
clientDoc = new ReportClientDocument();
clientDoc.setReportAppServer(ReportClientDocument.inprocConnectionString);
// Open report
clientDoc.open(reportName, OpenReportOptions._openAsReadOnly);
// ****** BEGIN SET RUNTIME DATABASE CREDENTIALS ****************
String connectString = "jdbc:oracle:thin:@192.168.1.4:1521:orcl";
String driverName = "oracle.jdbc.driver.OracleDriver";
String JNDIName = "orcl";
String userName = "act_db"; // TODO: Fill in database user
String password = "act_db"; // TODO: Fill in password
// Switch all tables on the main report and sub reports
CRJavaHelper.changeDataSource(clientDoc, userName, password, connectString, driverName, JNDIName);
// logon to database
CRJavaHelper.logonDataSource(clientDoc, userName, password);
// ****** END SET RUNTIME DATABASE CREDENTIALS ****************
// ****** BEGIN CONNECT PARAMETERS SNIPPET ****************
// STRING VALUE PARAMETER.
String stringValue = request.getParameter("DeptId");; // TODO: Fill in value
CRJavaHelper.addDiscreteParameterValue(clientDoc, "", "DeptId", stringValue);
// ****** END CONNECT PARAMETERS SNIPPET ****************
// Store the report document in session
session.setAttribute(reportName, clientDoc);
// ****** BEGIN CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET ****************
// Create the CrystalReportViewer object
CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
String reportSourceSessionKey = reportName+"ReportSource";
session.removeAttribute("reportSource");
Object reportSource = session.getAttribute(reportSourceSessionKey);
if (reportSource == null)
reportSource = clientDoc.getReportSource();
session.setAttribute(reportSourceSessionKey, reportSource);
// set the reportsource property of the viewer
crystalReportPageViewer.setReportSource(reportSource);
crystalReportPageViewer.setDisplayGroupTree(false);
session.removeValue("reportSource");
crystalReportPageViewer.setHasRefreshButton(true);
// Apply the viewer preference attributes
// Process the report
crystalReportPageViewer.processHttpRequest(request, response, application, null);
// ****** END CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET ****************
} catch (ReportSDKExceptionBase e) {
out.println(e);
Thanks In advance
Regards,
Amol PatilCrystalReportViewer viewer = new CrystalReportViewer();
viewer.setReportSource(reportSource);
viewer.setReportSource(reportSource);
viewer.setHasRefreshButton(true);
viewer.setOwnPage(true);
viewer.setOwnForm(true);
viewer.setHasExportButton(true);
viewer.setZoomFactor(100);
viewer.setPrintMode(CrPrintMode.ACTIVEX);
viewer.setParameterFields(fields);
viewer.setEnableParameterPrompt(true); --this line will prompt -
How to send a report output as a FAX ?
Hallo Experts,
How to send a report output as a FAX ?
Suppose if I have all the data in an internal table, I will show it as a normal list OR ALV list output.
In the application tool bar I should have a button, and by clicking it the output should go to the customer as FAX. How can I send it to a FAX ? Any Function modules ?
Please help me with an example program.
Regards,
Matt.Hi,
Hope the code given below helps you.
FORM SEND_FAX
TABLES DOC2FAX STRUCTURE TEST_DOC
USING COUNTRY
NUMBER.
DATA: SID(5) TYPE N.
DATA BEGIN OF POPT.
INCLUDE STRUCTURE ITCPO.
DATA END OF POPT.
DATA BEGIN OF PRES.
INCLUDE STRUCTURE ITCPP.
DATA END OF PRES.
CLEAR POPT.
POPT-TDCOPIES = 1. " one copy
* POPT-TDDEST = " done internaly by script,
* POPT-TDPRINTER = " do not fill !!!
POPT-TDNEWID = 'X'. " do not reuse old spool request
POPT-TDDATASET = 'TEST'(022). " fill as you want
POPT-TDSUFFIX1 = 'FAX'(023). " fill as you want
POPT-TDSUFFIX2 = SY-UNAME. " fill as you want
POPT-TDIMMED = 'X'. " send now
POPT-TDLIFETIME = 8. " keep 8 days in spool
POPT-TDTELENUM = NUMBER. " number without country code
POPT-TDTELELAND = COUNTRY. " country of recipient
POPT-TDCOVER = 'test fax'(024).
POPT-TDCOVTITLE = 'test fax'(024).
* POPT-TDIEXIT = 'X'.
CALL FUNCTION 'PRINT_TEXT'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX = ' '
ARCHIVE_PARAMS = ' '
DEVICE = 'TELEFAX' "<<< here we say: fax it !
DIALOG = 'X'
HEADER = HEADER
OPTIONS = POPT
IMPORTING
RESULT = PRES
TABLES
LINES = DOC2FAX
EXCEPTIONS
OTHERS = 01.
* do not bother with exception in sample code
* CANCELED = 01
* DEVICE = 02
* FORM = 03
* OPTIONS = 04
* UNCLOSED = 05
* UNKNOWN = 06
* FORMAT = 07
* TEXTFORMAT = 08
* EXTERNAL = 09.
IF SY-SUBRC = 0.
* arriving here means we could send:
SID = PRES-TDSPOOLID.
IF SID > '00000'.
MESSAGE S433 WITH SID.
ENDIF.
LEAVE .
ELSE.
* do not bother with exception in sample code
MESSAGE A400 WITH 'PRIN_TEXT'.
ENDIF.
ENDFORM. " SEND_FAX
Regards,
Siddarth -
HP OFFICEJET PRO 8500 - A909 - HOW DO I CLEAR FAX MEMORY IF FAX MEMORY FULL
HELP// WHILE I WAS RECEIVING ALARGE FAX, MY PAPER RAN OUT. DURING THE TIME IT TOOK ME TOREPLACE THE PAPER, THE MESSAGE FAX MEMORY FULL. CAN NOT RECEIVE FAX . WHAT CAN I DO ? NOW I CAN'T RECEIVE ANY NEW FAXES. I DON'T KNOW HOW TO CLEAR OR PRINT FROM MEMORY. SENIOR CITIZEN BLUES NOW IN EFFECT. I'VE FALLEN & I CAN'T GET UP, MENTAL FATIGUE
Hello CLEONFOWLER,
Welcome to the HP Forums!
I understand you're unable to receive a fax and now a message appears stating fax memory full using the Officejet 8500 A909. I will do my best to assist you and hopefully the information I will provide is going to avoid mental fatigue.
I am going to recommend performing a hard reset on your printer which could clear the message fax memory full. Please leave your printer turned on> Disconnect the power cord out of the printer for more than 60 seconds.
Just to let you know, this will remove every fax in your memory. It will clear the message and you can start receiving faxes again. The fax you were trying to receive will have to be re-sent.
Please post your results, as I will be looking forward to hearing from you. Have a great day!
I worked on behalf of HP. -
How do I set up my PowerBook to print wireless with HP psc 2410
Can someone tell me how to set up my PowerBook to
print wireless with my HP psc 2410 all-in-one?
What do I need to do?
I checked ifelx list and check out ok for my model.
Thanks,
Kes
PowerBook G4 15 1.67GHz 10.4.2 512MB AirPort Extreme; iMac G4 20 1.25GHz Mac OS X (10.4.2)Ensure that the Airport base station is configured to not distribute IP addresses.
On the iMac
System Preferences > Sharing > Printer Sharing
On the PowerBook
Applications > Utilities > Printer Setup Utility
Add Printer
It may work with the HP driver (which you will need to install on the PowerBook)
It may work with a third-party driver such as the HPIJS drivers or the Gimp-Print drivers, but this is not the case with all printers. -
HT1338 Hi, does anyone know how to clear a icon saying Microsoft Error Report?
Hi, Does anyone know how to clear an icon saying Microsoft Error Reporting?
Where do you see this icon?
What are you doing when the icon appears? -
How to do crystal reports in bi-7 i need clear steps
how to do crystal reports in bi-7 i need clear steps
Hi,
Please read the following documents.
I am sure that this is going to help you in creating crystal reports.
Regards,
Subha
Pls grant me points if it is found useful
Use
The Reporting Agent allows you to precalculate BEx queries (as useful queries) for Crystal reports in the background. This is a device used to improve system performance when executing Crystal reports.
Prerequisites
· In the BEx Query Designer, you have defined a useful query for Crystal Reports and determined variables for the required characteristics.
· You may want to apply a filter when precalculating this useful query using a control query (see Parameter Filtering in the section below). In this case, you need to have created an additional suitable query in the BEx Query Designer.
The associate variable must have the type Changeable with Query Navigation. Other variables can have any type.
Procedure
1. Choose the REPORTING_AGENT transaction code.
2. Select Precalculating Crystal Reports Queries and choose Execute.
3. Navigate to the required query in the left-hand Reporting Agent Settings tree.
4. You have the following options for creating a new setting:
- Choose New Setting from the context menu.
- Choose Create New Setting.
The New Reporting Agent Setting dialog box appears.
5. Enter a technical name and a description.
The following information is displayed on the General tab page:
- The functional area of the setting is Precalculation of Crystal Reports Queries.
- Information about the query for which you are creating a setting is shown under the Query group header (description, technical name, InfoProvider).
- After the setting has been saved for the first time, the system displays details of the last person who changed the setting and the time this change was made, under the Last Changed On/By group header.
- Under the Setting is Used in Packages group header, the system displays information about the packages in which the setting is used, and how they are scheduled. This information can only be displayed if you have defined the setting and assigned one or more scheduling packages to it.
6. Choose the Parameters tab page.
7. Determine whether precalculation of the Crystal Reports queries are to be parameterized using a filter and using variants.
For more information and recommendations for choosing parameters in a straightforward example, see Parameterizing Crystal Reports Queries Setting.
Filtering Parameters
No Filters
When you do not want to use a control query to precalculate variables, choose No Filter.
You can combine this option with parameterization using Variables (see below).
Explicitly Using Query Result
If you want to use a control query when filtering, choose Explicitly Using Query Result. You can now make entries in the Control Query and Variants fields.
Specify the technical name of the control query. Input help is available. After you save your entries, the system updates the information according to your selections.
You only need to specify a variant when the control query contains input-ready mandatory variables. This does not happen very often, however.
You can combine this option with parameterization using Variables (see below).
Parameter Variants
After making your setting for filtering a parameter, you can process variant for the individual characteristic values of the variables set in the useful query.
Note: The variable screen only offers such variables when they have not already been filled by the control query. (This can also include variables of type Changeable with Query Navigation, as long as they arent filled by the query).
You can choose from the following functions:
Create a Variant
A dialog box appears in which you can choose values for the SAP variables used in the useful query, in the Query Selection area. Input help is available for those InfoObjects for which SAP variables have been created.
Enter the required data.
Choose .
Change Variants
Delete Variants
If you have already created one or more variants, the system lists these in the lower part of the screen. Choose the variants you want to change or delete and choose the appropriate function. -
How to clear a buffer memory in a report program?
Hi Gurus,
How to clear a buffer memory in a report program?
Regards,
Amit Kumar SinghYes i am using USER__COMMAND like this
FORM USER_COMMAND *
FORM user_command USING u_ucomm TYPE sy-ucomm
us_selfield TYPE slis_selfield. "#EC CALLED
data : l_memory_id(20) type c value 'BSVA_BUFFER'.
free memory ID l_memory_id.
CASE u_ucomm.
WHEN gc_refresh.
PERFORM clear_data.
CONCATENATE '-' p_months INTO p_months.
PERFORM populate_z01. "List of Plants and Materials
PERFORM populate_z02. "List of Periods and dates
PERFORM populate_z03. "Report Contents
PERFORM add_data.
us_selfield-refresh = c_x.
us_selfield-col_stable = c_x.
us_selfield-row_stable = c_x.
ENDCASE.
ENDFORM. "user_command
FORM PF_STATUS_SET *
FORM pf_status_set USING ut_extab TYPE slis_t_extab. "#EC CALLED
DELETE ut_extab WHERE fcode = gc_refresh.
SET PF-STATUS 'STANDARD_FULLSCREEN' OF PROGRAM 'SAPLKKBL'
EXCLUDING ut_extab.
ENDFORM. "pf_status_set
Where gc_refresh is defined as
constants : gc_refresh TYPE syucomm VALUE '&REFRESH'. -
I have some delivery numbers delivery
I have triggered GI to site, but there are still some items pending at GIT report.
Could you help to check the reason and indicate how to clear them in the report.This would be your path
<install_dir>/bobje/data/<cms_port/storage//docs -
HP Officejet G85 - how do i print a fax report for previous month?
When I select "Print Fax Report" from menu, prints only last 30 faxes. Can I print fax report of a longer period, such as the previous month?
Hi there,
Unfortunately I do not see any options availble like that for the G85. There does not seem to be a readily available option sorry.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
HT5429 How long after you report a problem does it take for the fix to be picked up in maps?
How long after you report a problem does it take for the fix to be picked up in maps? The street I live on is misspelled. It's shown as one word, but it should be two words. Maps cannot find the address when it is spelled correctly, so I have it purposely misspelled it as one word in my contacts, which helps for the most part, however it still tries to place my home on an entirely different street all together. Fortunately this new random street is at least close to where I live. When I used to spell my street correctly with two words, maps would try to send me to the next town over. So it kind of works, as long as I misspell my street, and ignore the fact that it is showing where I live to be a couple of streets down from where I actually live. I live in Connecticut - not in the most populated of areas, but not in the middle of nowhere either. Amazingly enough Google Maps will correctly find my address whether it's spelled with one words or two words. Google Maps also shows my apartment complex, which Apple Maps does not. I really wish Apple would just do a quick pass of the area to fix these issues. I’ve reported the problem several times, months ago. How long will it take for there to be a fix? I keep trying to use the Apple ecosystem, but Google is clearly the better solution for me.
Apple does not do the GIS data for maps. That comes from 3rd party vendors like Tom Tom. I have read it takes some time to update map data. The only thing you can do is report it.
Not to belittle your complaint, but on my end it is Apple that is clearly better. When looking at my house in Google, the satellite photo is more than 4 years old, and the Apple one is much newer. I can tell because of the condition of my home and the neighbor's. They had an above ground pool which was removed 4 years ago and it shows on the Google Map. I had remodeling and roof work done to my home that started 3 years ago and Apple's satellite view showed this work done, which took over a year to complete. I live in the middle of a block in a rural town. Both Apple and Google split the block into 100 parts and put my home close to the beginning of the block instead of where it actually sits. I've reported it to both Google and Apple and no one has changed. Just one of those things. But, keep your chin up, it will get corrected eventually. -
How to Created custom report for Ship not Billed (SD/FI)?
Hi all,
I am anticipating to write some abap reports..Here is one of them..
Anyone can help me with writing a Report , how to do 'Custom Report for shipped not Billed(SD/FI)' ..But since I am new to Abap , if you wish to reply, please use a little more detail and simple explanation, step by step so I can understand what is the idea, how it can be acheived...what kind of report should be used , techniques, tables etc...:)
Appreciate your help!
Regards,
BobyHi Boby,
You need to create custom transaction to achive these results.
you will have selection-screen ,it would be :
Date : Here date would be mandatory - Ranges Option
Customer - Optional field - Ranges
Order # Sales Order (Optional) Ranges
Invoice # - Invoice # (Optional) Ranges
You will get the data based on ur selection-screen criteria ...
First you will have customer order details from diffrent table
VBAK,
VBAP,
LIKP
LIPS
VBRK,
VBRP
KNA1,
VBFA Tables ( See the my sample program )
Output would be :
Customer # Custome Name Order # Delivery # Invoice # Netpr, Netquantity ,
Check the condition whether invoice table has VBRK-RFBSK = ''.
See the my sample program : This is sales report by monthly..
REPORT ZFDSALES_REPORT no standard page heading
message-id zwave.
Data Declaration Part
TYPE-POOLS
type-pools : slis.
Tables
tables : VBAK,
VBAP.
Internal table for VBAK Table
data : begin of i_vbak occurs 0,
vbeln like vbak-vbeln,
bstnk like vbak-bstnk,
vdatu like vbak-vdatu,
end of i_vbak.
Internal table for VBAP and MATNR
data : begin of i_vbap occurs 0,
vbeln like vbap-vbeln,
matnr like vbap-matnr,
kdmat like vbap-kdmat,
kwmeng like vbap-kwmeng,
netpr like vbap-netpr,
maktx like makt-maktx,
end of i_vbap.
Internal tables
data : begin of i_sales occurs 0,
vdatu like vbak-vdatu,
bstnk like vbak-bstnk,
matnr like vbap-matnr,
maktx like makt-maktx,
kdmat like vbap-kdmat,
kwmeng like vbap-kwmeng,
netpr like vbap-netpr,
end of i_sales.
Variable for ALV
data : v_repid like sy-repid,
gt_fieldcat type slis_t_fieldcat_alv.
Selection-screen
selection-screen : begin of block blk with frame title text-001.
select-options : s_vbeln for vbak-vbeln,
s_erdat for vbak-erdat,
s_ernam for vbak-ernam,
s_vdatu for vbak-vdatu obligatory,
s_BSTNK for vbak-BSTNK,
s_KUNNR for vbak-kunnr,
s_matnr for vbap-matnr,
s_KDMAT for vbap-KDMAT.
selection-screen : end of block blk.
Initilization
initialization.
v_repid = sy-repid.
S T A R T - O F - S E L E C T I O N ****************
start-of-selection.
Get the data from VBAK and VBAP Tables
perform get_vbak_vbap.
E N D - O F - S E L E C T I O N *****************
end-of-selection.
Display the data
perform dispolay_data.
*& Form get_vbak_vbap
Get the data from VBAK and VBAP Table
FORM get_vbak_vbap.
Get the data from VBAK Table
select vbeln bstnk vdatu from vbak into table i_vbak
where vbeln in s_vbeln
and bstnk in s_bstnk
and vdatu in s_vdatu
and kunnr in s_kunnr
and erdat in s_erdat
and ernam in s_ernam.
if sy-subrc ne 0.
message e000(zwave) with 'No data found for given selection'.
endif.
Get the data from VBAP Table
select avbeln amatnr akdmat akwmeng a~netpr
b~maktx into table i_vbap
from vbap as a inner join makt as b on bmatnr = amatnr
for all entries in i_vbak
where a~vbeln in s_vbeln
and a~kdmat in s_kdmat
and a~abgru = space
and a~matnr in s_matnr
and a~matnr ne '000000000000009999'
and a~matnr ne '000000000000004444'
and a~matnr ne '000000000000008888'
and a~matnr ne '000000000000001111'
and a~werks = '1000'
and b~spras = 'E'
and a~vbeln = i_vbak-vbeln.
if sy-subrc ne 0.
message e000(zwave) with 'No data found for given selection'.
endif.
sort i_vbak by vbeln.
sort i_vbap by vbeln matnr.
loop at i_vbap.
read table i_vbak with key vbeln = i_vbap-vbeln
binary search.
if sy-subrc eq 0.
i_sales-bstnk = i_vbak-bstnk.
i_sales-vdatu = i_vbak-vdatu.
i_sales-matnr = i_vbap-matnr.
i_sales-kdmat = i_vbap-kdmat.
i_sales-maktx = i_vbap-maktx.
i_sales-netpr = i_vbap-netpr.
i_sales-kwmeng = i_vbap-kwmeng.
append i_sales.
else.
continue.
endif.
clear : i_sales,
i_vbap,
i_vbak.
endloop.
sort i_sales by vdatu bstnk matnr.
refresh : i_vbap,
i_vbak.
ENDFORM. " get_vbak_vbap
*& Form dispolay_data
Display the data
FORM dispolay_data.
Fill the Fiedlcat
PERFORM fieldcat_init using gt_fieldcat[].
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = v_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = gt_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IT_EXCEPT_QINFO =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = i_sales
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
ENDFORM. " dispolay_data
*& Form fieldcat_init
text
-->P_GT_FIELDCAT[] text
FORM fieldcat_init USING e01_lt_fieldcat type slis_t_fieldcat_alv.
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
Delivery Date
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'VDATU'.
LS_FIELDCAT-OUTPUTLEN = 12.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Delivery Date'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Purchase Order #Material Description
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'BSTNK'.
LS_FIELDCAT-OUTPUTLEN = 25.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Purchase Order #'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Material
CLEAR LS_FIELDCAT.
LS_FIELDCAT-REF_FIELDNAME = 'MATNR'.
LS_FIELDCAT-REF_TABNAME = 'MARA'.
LS_FIELDCAT-FIELDNAME = 'MATNR'.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Material #'.
ls_fieldcat-seltext_M = 'Material #'.
ls_fieldcat-seltext_S = 'Material #'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Material Description
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'MAKTX'.
LS_FIELDCAT-OUTPUTLEN = 40.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Material Description'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Customer Material #
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'KDMAT'.
LS_FIELDCAT-OUTPUTLEN = 35.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Customer material no.'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Quantity
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'KWMENG'.
LS_FIELDCAT-OUTPUTLEN = 15.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Quantity'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Net Price
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'NETPR'.
LS_FIELDCAT-OUTPUTLEN = 15.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Net Price'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
ENDFORM. " fieldcat_init
Reward Points if it is helpful
Thanks
Seshu -
How to clear grey loading screen and animated gif (Dynamic Action with "Show Processing" on submit)
APEX V4.2.3
DB 11.2
I have a classic report on page 1. I have a region button called "Export" (defined by a submit dynamic action with "show processing=Yes") that submits the page and then via a branch directs me to page 2 which has a slightly different version of the report on page 1 (i.e. no breaks) which I want to capture as a CSV export. Therefore I've set the report template on page 2 to " Export:CSV".
Now when I click on the page 1 export button the grey screen and loading gif appears indicating that the report is executing and then as expected, page 2 doesn't appear but instead the standard open/save window's dialog box appears asking to open or save the generated CSV file. All good..but the grey loading screen remains. How do I clear this loading screen and get back to the context of page 1 ?
thanks in advance
PaulPHi PPlatt,
We would love to help but you left out one crucial part of the puzzle: namely how does your CSV report get exported. With the way it is setup (a redirect to another page), I'm going to assume you do that because you have some PL/SQL on that page that prints the CSV.
Now there are two questions that are crucial here:
- How do we stop the icon from bugging us on the screen
- How do we communicate with the browser that it should no longer display the loading icon
The first question is rather easy, two simply lines of codes can do that:
$('#apex_wait_popup').hide();
$('#apex_wait_overlay').hide();
But when do we use this code? Quite simple when the document is downloaded. When is it downloaded? At the end of the PL/SQL code that prints the document to the browser.
What you could do is at the end of that code give an application item a certain value. For example :AI_PRINTED := 'Y';
Then all you need to do is let the browser ask for the value. You could do this by using JavaScript to continuously fire AJAX to the server using a JS timing event:
http://www.w3schools.com/js/js_timing.asp
Better would be a Server send event, but since you left out another crucial piece of information: your browser, I will not go deeper into this.
Start this timing event when someone asks for the document, and end it as soon as the process returns that :AI_PRINTED equals 'Y'.
Despite the lack of information, I hope I have given, or at least inspired you to get to the solution.
Regards,
Joni -
How to print the report directly without previewing (report viewer) using c# windows application
Hi,
Currently, we are using crystal report to all of our reporting applications, but since I/users have encountered some issues about CR's speed to load only a simple report, maybe it is now time for us to adopt a new reporting environment in which I think SSRS
can fill this problem.
To start with, I have here a sample code, that uses the crystal report to print the report directly without previewing:
csCashInvoiceCal csCashCal; --Crystal report name .rpt
dsCsReceipt dsCs; --created dataset
DataTable u;
DataRow s;
private System.Drawing.Printing.PrintDocument printDocument1;
private System.Windows.Forms.PrintDialog printDialog1;
ParameterValues paramValue;
ParameterDiscreteValue discreteValue;
ParameterFieldDefinition fieldDefinition;
private void btnPrint_Click(object sender, EventArgs e)
this.Cursor = Cursors.WaitCursor;
loadReceipt2();
print2();
csCashCal.Close();
this.Cursor = Cursors.Default;
private void loadReceipt2()
dsCs = new dsCsReceipt(); --created dataset
u = dsCs.Tables.Add("DtCsReceipt");
u.Columns.Add("Qty", Type.GetType("System.String"));
u.Columns.Add("UOM", Type.GetType("System.String"));
u.Columns.Add("Description", Type.GetType("System.String"));
u.Columns.Add("UnitPrice", Type.GetType("System.String"));
u.Columns.Add("Discount", Type.GetType("System.String"));
u.Columns.Add("Amount", Type.GetType("System.String"));
try
for (int i = 0; i < dgvDesc.Rows.Count - 1; i++)
s = u.NewRow(); double.TryParse(dgvDesc.Rows[i].Cells[Discount2.Name].Value.ToString(), out discount);
s["Qty"] = double.Parse(dgvDesc.Rows[i].Cells[Qty.Name].Value.ToString());
s["UOM"] = dgvDesc.Rows[i].Cells[Uom2.Name].Value.ToString();
s["Description"] = invcode + dgvDesc.Rows[i].Cells[Description.Name].Value.ToString();
s["UnitPrice"] = dgvDesc.Rows[i].Cells[UnitPrice.Name].Value.ToString();
if (discount != 0)
s["Discount"] = "(" + string.Format("{0:0.##}", discount) + "%)";
else
s["Discount"] = "";
s["Amount"] = dgvDesc.Rows[i].Cells[Amount2.Name].Value.ToString();
u.Rows.Add(s);
catch (Exception) { }
csCashCal = new csCashInvoiceCal();
csCashCal.SetDataSource(dsCs.Tables[1]);
//csCashCal.Refresh();
loadParameter2();
private void loadParameter2()
ParameterFieldDefinitions paramFieldDefinitions;
paramValue = new ParameterValues();
discreteValue = new ParameterDiscreteValue();
paramFieldDefinitions = csCashCal.DataDefinition.ParameterFields;
discreteValue.Value = date;
fieldDefinition = paramFieldDefinitions["Date"];
commonParam();
discreteValue.Value = txtcsno.Text;
fieldDefinition = paramFieldDefinitions["InvoiceNo"];
commonParam();
discreteValue.Value = txtNameTo.Text;
fieldDefinition = paramFieldDefinitions["CustomerName"];
commonParam();
discreteValue.Value = txtAdd.Text;
fieldDefinition = paramFieldDefinitions["CustomerAddress"];
commonParam();
------other parameters----
private void commonParam()
paramValue.Clear();
paramValue.Add(discreteValue);
fieldDefinition.ApplyCurrentValues(paramValue);
private void print2()
using (printDocument1 = new System.Drawing.Printing.PrintDocument())
using (this.printDialog1 = new PrintDialog())
//this.printDialog1.UseEXDialog = true;
this.printDialog1.Document = this.printDocument1;
DialogResult dr = this.printDialog1.ShowDialog();
if (dr == DialogResult.OK)
int nCopy = this.printDocument1.PrinterSettings.Copies;
int sPage = this.printDocument1.PrinterSettings.FromPage;
int ePage = this.printDocument1.PrinterSettings.ToPage;
string PrinterName = this.printDocument1.PrinterSettings.PrinterName;
try
csCashCal.PrintOptions.PrinterName = PrinterName;
csCashCal.PrintToPrinter(nCopy, false, sPage, ePage);
printcount++;
//saveCountPrint();
catch (Exception err)
MessageBox.Show(err.ToString());
This is only a simple sales receipt application that uses dgv and textboxes to push its data to dataset to the crystal report, a simple one but there are instances that it is very slow.
But I'm having trouble implementing this using SSRS, since I'm only new to this one, wherein I created the report using report wizard, with two button options inside the form for print preview or direct print selection. Actually, it is very easy to implement
with print preview because it uses reportviewer. My problem is that how can I print the report directly without using a reportviewer?
So here is my code so far which I don't know what's next:
private void button2_Click(object sender, EventArgs e)
this.Cursor = Cursors.WaitCursor;
loadReceipt3();
//print3();
this.Cursor = Cursors.Default;
ReportParameter[] parameter = new ReportParameter[11];
private void loadParameter3()
parameter[0] = new ReportParameter("InvoiceNo", txtcsno.Text);
parameter[1] = new ReportParameter("Date", date);
parameter[2] = new ReportParameter("CustomerTin", txtTin.Text);
parameter[3] = new ReportParameter("CustomerName", txtNameTo.Text);
parameter[4] = new ReportParameter("CustomerAddress", txtAdd.Text);
parameter[5] = new ReportParameter("Agent", agent);
parameter[6] = new ReportParameter("Discount", "Discount: ");
parameter[7] = new ReportParameter("TotalDiscount", lblDiscount.Text + "%");
parameter[8] = new ReportParameter("TotalSales", rdtotal);
parameter[9] = new ReportParameter("Tax", rdtax);
parameter[10] = new ReportParameter("TotalAmount", rdnet);
private void loadReceipt3()
DataSet dsrs = new DataSet();
DataTable dtrs = new DataTable();
DataRow drs;
dtrs.Columns.Add("Qty", Type.GetType("System.String"));
dtrs.Columns.Add("UOM", Type.GetType("System.String"));
dtrs.Columns.Add("Description", Type.GetType("System.String"));
dtrs.Columns.Add("UnitPrice", Type.GetType("System.String"));
dtrs.Columns.Add("Discount", Type.GetType("System.String"));
dtrs.Columns.Add("Amount", Type.GetType("System.String"));
try
for (int i = 0; i < dgvDesc.Rows.Count - 1; i++)
drs = dtrs.NewRow();
drs["Qty"] = double.Parse(dgvDesc.Rows[i].Cells[Qty.Name].Value.ToString());
drs["UOM"] = dgvDesc.Rows[i].Cells[Uom2.Name].Value.ToString();
drs["Description"] = invcode + dgvDesc.Rows[i].Cells[Description.Name].Value.ToString();
drs["UnitPrice"] = dgvDesc.Rows[i].Cells[UnitPrice.Name].Value.ToString();
if (discount != 0)
drs["Discount"] = "(" + string.Format("{0:0.##}", discount) + "%)";
else
drs["Discount"] = "";
drs["Amount"] = dgvDesc.Rows[i].Cells[Amount2.Name].Value.ToString();
dtrs.Rows.Add(s);
catch (Exception) { }
int addtlRow = 7;
if (addtlRow > (count - 1))
addtlRow = addtlRow - (count - 1);
for (int i = 0; i < addtlRow; i++)
dtrs.Rows.Add();
loadParameter3();
LocalReport localreport = new LocalReport();
localreport.SetParameters(parameter);
localreport.DataSources.Clear();
localreport.DataSources.Add(new ReportDataSource("dsSalesReceiptSsrs", dtrs));
localreport.Refresh();
//what's next....
So what's next after local..refresh()? Actually, I have googled a lot but I didn't found the exact solution that I'm looking for which confuses me a lot.
Anyway I'm using VS 2010 with sql server 2012 express.
You're help will be greatly appreciated.
Thank you,
HardzAfter some further studies with ReportViewer controls and with the use of this tutorial @ : http://msdn.microsoft.com/en-us/library/ms252091.aspx, which helps me a lot on how to print a report without using a report viewer, I found out what is missing
with my code above and helps solve my question.
Here's the continuation of the code above:
private void loadReceipt3()
loadParameter3();
LocalReport localreport = new LocalReport();
localreport.ReportPath = @"..\..\SsrsCashReceipt.rdlc";
localreport.SetParameters(parameter);
localreport.DataSources.Clear();
localreport.DataSources.Add(new ReportDataSource("dsSalesReceiptSsrs", dtrs));
Export(localreport);
print4();
private IList<Stream> m_streams;
private int m_currentPageIndex;
private void Export(LocalReport report)
string deviceInfo =
@"<DeviceInfo>
<OutputFormat>EMF</OutputFormat>
<PageWidth>8.5in</PageWidth>
<PageHeight>11in</PageHeight>
<MarginTop>0.25in</MarginTop>
<MarginLeft>0.25in</MarginLeft>
<MarginRight>0.25in</MarginRight>
<MarginBottom>0.25in</MarginBottom>
</DeviceInfo>";
Warning[] warnings;
m_streams = new List<Stream>();
report.Render("Image", deviceInfo, CreateStream,
out warnings);
foreach (Stream stream in m_streams)
stream.Position = 0;
private void print4()
if (m_streams == null || m_streams.Count == 0)
throw new Exception("Error: no stream to print.");
PrintDocument printDoc = new PrintDocument();
PrintDialog printDlg = new PrintDialog();
printDlg.Document = printDoc;
DialogResult dr = printDlg.ShowDialog();
if (dr == DialogResult.OK)
if (!printDoc.PrinterSettings.IsValid)
throw new Exception("Error: cannot find the default printer.");
else
printDoc.PrintPage += new PrintPageEventHandler(PrintPage);
m_currentPageIndex = 0;
printDoc.Print();
Dispose();
public void Dispose()
if (m_streams != null)
foreach (Stream stream in m_streams)
stream.Close();
m_streams = null;
private Stream CreateStream(string name, string fileNameExtension, Encoding encoding, string mimeType, bool willSeek)
Stream stream = new FileStream(name + "." + fileNameExtension,
FileMode.Create);
m_streams.Add(stream);
return stream;
private void PrintPage(object sender, PrintPageEventArgs ev)
Metafile pageImage = new
Metafile(m_streams[m_currentPageIndex]);
// Adjust rectangular area with printer margins.
Rectangle adjustedRect = new Rectangle(
ev.PageBounds.Left - (int)ev.PageSettings.HardMarginX,
ev.PageBounds.Top - (int)ev.PageSettings.HardMarginY,
ev.PageBounds.Width,
ev.PageBounds.Height);
// Draw a white background for the report
ev.Graphics.FillRectangle(Brushes.White, adjustedRect);
// Draw the report content
ev.Graphics.DrawImage(pageImage, adjustedRect);
// Prepare for the next page. Make sure we haven't hit the end.
m_currentPageIndex++;
ev.HasMorePages = (m_currentPageIndex < m_streams.Count);
Thank you very much for this wonderful tutorial. :) -
How to clear parameters defined in selection screen on back button
Hi,
I have a report with parameters, few being input fields, and check boxes. After report is executed when user selects the back button, the selection screen is displayed again but with the old selection values. I want to clear them.
So in the Initialization even I added the code to clear all these parameters;
CLEAR: p_aaa, p_bbb, p_ccc.
I debugged and control passes through this code but still the fields are not cleared and they retain the old input values.
How to clear them ?
thnks>
Rob Burbank wrote:
> Yes he did. My mistake.
>
> But isn't this what he wants? To clear the Selection screen so that something has to be entered?
>
> Rob
IMO, he only wants to clear the selection screen parameters on the click of 'BACK' button
in the list screen. If the OP clears the selection screen variables in AT SELECTION-SCREEN OUTPUT
even, the values assinged to the selection parameters in the INITIALIZATION and with the DEFAULT addition of the PARAMETERS and SELECTION-OPTIONS statements will also be overwritten even when the report is executed for the
first time.
-Rajesh.
Maybe you are looking for
-
Good day, I could really need some information. Thank you in advance. I have a 2008 24" iMac, running on 10.5.8. I want to describe the whole issue. The only thing that changed in my routine and made it crash was that I bought a new Apple keyboard, w
-
When my 6 year old daughter plays the free games that I have downloaded for her IPAD and IPOD, I am now getting upgrade charges on these free games to my AMEX Card. Why is this happening and how do I get my AMEX card off of the IPAD and IPOD?
-
Print Option in the Salary Statement. What is the Default Printer ?
Hello First off im new to the whole SAP ESS / NetWeaver theme and try to get a grasp of it. Along the way one of my Collaegues asked me to find out about the Printing option in the Salary Statement of our ESS Portal. I have been searching the Web qui
-
Computer won't reconize iPod(Yet it still works fine as an iPod)
I have a 5.5 gen 80GB iPod, and it's always worked fine(Even through multiple attempts at using iPod Linux and Rockbox). Last night I go and plug it in to my Linux laptop, worked fine for what I used it for(just getting to files I had saved on it), a
-
PDF - Printing in OSX 10.5.4 Can't create PDF/X-3 document
This random error is not really causing me some trouble! - If anyone has information as to how to fix this, please let me know. When I select print to PDF/X in the OS X drop down menu, everything works fine until I get an ALERT: "Couldn't create PDF/