PSE 7 Win Vista x64: Scanner no longer works after reinstall

Hello,
I was using my Kodak i1220 scanner no problem in Adobe Photoshop Elements 7 on Windows Vista Ultimate x64 SP1 for several months (prior to that, I had been using PSE 6 with no issues).
Recently I did a clean install of Windows. I loaded Photoshop, then installed my scanner (in that order).
Now, when I try to scan, the scanner pulls through 2 pictures and then stops with an error stating that Photoshop was unable to obtain the file from the device.
Interestingly, the scanner works just fine with Photoshop CS4. However, I do not want to scan with that because it is an extra step to then have to save each image and then launch PSE to organize them. My mother is helping me with this project and I can't make her do that.
In terms of troubleshooting, I've uninstalled the scanner and PSE7, rebooted, installed the scanner, and then reinstalled PSE7, but the problem persists. I thought perhaps the order in which I installed the scanner and PSE might affect it, but perhaps that's not a factor.
Hopefully someone can provide some insight on this. We've scanned over 12,000 pictures into PSE in the past 6 months and I would hate for this roadblock to sabotage the project!
Thanks,
--David

Hi, is there anyone who might be able to help me with this?
I've tried uninstalled the scanner and Photoshop Elements, rebooting, re-installing the scanner, and then reinstalling PSE7, but the problem persists. I thought perhaps the order in which I installed the scanner and PSE might affect it, but perhaps that's not a factor.
Are there usually issues scanners if they are installed after PSE?
Thanks.

Similar Messages

Headphones and Win FM 5.31 no longer work after installing Audigy SE (Windows

[color="#ff0000"]I had the new Sound Blaster Audigy SE SB0570? installed in my computer. I have 2 front stereo speakers next to my computer monitor which are connected to the green output on the sound card and they work fine.
I get sound from Windows Media Player or either CD/DVD player. [color="#ff0000"]?[color="#ff0000"]But now my headphones, when plugged into the jacks in the front of my computer case?have no sound coming through. They will work from the same green output as my speakers use -- but that defeats the functionality and convenience of using headphones.[color="#ff0000"]?[color="#ff0000"]Is there another way to connect the headphones without having to share the same output as for the speakers ?[color="#ff0000"]I have tried using the other?2 outputs next to the green output -- but they don't work for the headphones.[color="#ff0000"]. ?[color="#ff0000"]I am having problems with my radio online. I am using winFM 5.3 and I can not get any sound though my speakers. I get sound from Windows Media Player or either CD/DVD player. [color="#ff0000"]?[color="#ff0000"]Help, please !!!![color="#ff0000"]?[color="#ff0000"]P.S.: when I installed the software cd, all went well except for this message:[color="#ff0000"]??"Windows Media Player 0"?? This version of Windows Media Technologies is incompatible with this version of windows. For more information, view the information at the Microsoft web site.[color="#ff0000"]??

Solved after reinstalling Win XP. Wasted too much time on trying other possible solutions.
Hope other people may learn something out of it.

Fingerprint scanner no longer works after Win 8 upgrade

HP Pavilion DV6T
Product Number: WW142AV
Operating System: Microsoft Windows 8 (64-bit)
I upgraded to WIN8 pro from Windows 7 home premium a few days ago. Now my Fingerprint reader no longer lights up or scans my fingerprint. I checked the driver in device manager and it says that the driver is up to date and that the hardware is working properly. I also downloaded the most recent update of Simplepass software for Win8 but it does not help.
This question was solved.
View Solution.

Nevermind, I found a good solution from user KingsRook14 on a microsoft answer forum. This worked for me!
Validity sensor fix for WIN8

HP Photosmart D110a - Scanner no longer works after upgrading to OS Mavericks 10.9

I have an iMac. I upgraded my system to OS 10.9.5 Mavericks and the scanner of my multifunctional HP Photosmart D110a stopped working. Images imported by the scanner can not be saved in any format. I tried importing and saving from many different applications, as suggested in this forum, but none worked. I have read and researched this forum for at least 5 hours and none of the solutions worked! Neither for me nor for the people who had the same problem! I tried absolutely everything and nothing solved the problem! I downloaded drivers from various links provided, I reinstalled the printer multiple times, I read absolutely everything and no response from the HP team was satisfactory! The HP team indicates generic installation solutions, as if treating with stupid people. No objective response was presented! This seems like a joke! This is ridiculous!
Please, I require a clear and objective solution !!!
Thank you

Hi @LuloMusic
There is no full feature software and driver available from HP, but the OS X v10.9 Mavericks driver for your printer is available through Apple Software Update (ASU).
With this driver you can still print and scan, you just wont have HP software to scan from. Scanning to the computer from the printer control panel is only available when using HP Scan software, thus it will not work because there is no HP scan software as apart of the Apple Software Update driver.
This explains the issue you are having with the Scan software. That program, and any other HP Software for that printer that is on the computer was intended for an earlier version of the operating system not 10.9. Unexpected Scan Output Using HP Scan Application for HP Multifunction Printers When Using OS X v10.9...
Please complete the steps below to rid the computer of the incompatible software.
Scrub/ Uninstall
Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
Click continue, click on one of the printers in the list.
* Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
Click uninstall.
Reset Printing System
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer.
At this point you can connect a USB cable from the printer to the computer and you will be able to print and scan, or if the printer is already on your network you can add the printer to your System Preferences with these steps;
Please ensure you are using the HP driver
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can choose the printer driver
Now you can scan using one of the following methods;
Method one: Scan from the Print & Scan window
Method two: Scan from Apple Preview
Method three: Scan from Apple Image Capture
I hope this helps. If you have any additional questions or have any difficulty using any of these methods, please let me know what method you are trying and what the issue/error is. You may also find the following document helpful; OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
I hope this helps.
- In support of Movember
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Time Machine no longer working after reinstalling OSX 10.5 w/TM backup

About a week ago Disc Utility told me I had serious problems with my HD structure and a reinstall was necessary. Fortunately, restoring everything using Time Machine was flawless, however Time Machine has not done a single backup since. The Backup.backupdb file is still there on the external drive, along with 6 other folders created at the time I did the reinstall (same names as the 6 inside the subfolder, system, library, users...). If I try to manually do a TM backup it tells me I don't have enough HD space as though it wants to start from scratch, when the folders are all still there from before the reinstall.
Any ideas why Time Machine no longer recognizes the files it created 2 weeks ago?

I had to reinstall Leopard and restore using TM. It also worked flawless for me. When I checked to see if it was backing up again, there was nothing. I also tried to manually back and that didn't work either. I went into System Preferences, Time Machine and had to choose my TM backup drive again. Once I did that it worked perfect.

Scanner doesn't work after reinstalling

I reinstalled my HP all in one and now it refused to scan.
Another issue is when I want to print only a certain section of my document It does not give me the option of "SELECTION".
I hope someone has a solution to these two problems.

If you go to Advanced settings in the HP Scan, you can then go to the destination tab and choose your save location. Once you know you save location you should be able to find your saved scans!
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

I just downloaded IOS 8.0 and now my Brookstone Scanner no longer work. I read in theScanner app that my scanner is not compatible with iOS 8.0. Is there an Update coming to fix this? Or can I downgrade to IOS 7.0. Right now my scanner is no good.

MMy Brookstone Scanner no longer works with IOS 8.0. Is an Update coming to fix this?

You'll have to contact Brookstone, the developer of the app in question to find out if they will update the app.

HT6114 HP Office Jet Pro 8500 Scanner no longer works with Mavericks upgrade

I have an all-in-one printer/copier/fax/scanner, HP Office Jet Pro 8500. The scanner no longer works with the Mavericks upgrade. Is it possible to get the scanner back in use? The printer and fax is fine, but I really use the scanner a lot. Please helap me.

The following link to the HP Support site indicates that scanning is still supported for the OfficeJet Pro 8500 using Mavericks but also indicates that "you may need to scan in a different way than you did before you installed Mavericks." See the FAQ section of http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&cc=us&dlc=en&lc=en &os=4159&product=3752456&sw_lang=#N1237

My USB ports and fingerprint scanner no longer work...

This problems requires a bit of exposition and I'm bad with computers so bare with me. A few months I noticed my USBs were not working on my computer, So I tested the same USBs on another computer and they all worked so I knew something was wrong with my computer. I decided to try some "solutions" online and only made the problem worse.Before my computer would at least recognise that there was a USB and try to do something with it, only to fail miserably. If I remember correctly it would say something like "failed to install device drivers".Ever since I tried those "solutions" all it does now is make a noise when i plug in a USB. Oh and my fingerprint scanner no longer works. I remember messing around in the Device manager and messing around with things. Here is what I noticed. under the USB controllers tab there is a list that looks like this Universal Serial Bus Controllers HP Webcam Universal Serial Bus (USB) Controllers Universal Serial Bus (USB) Controllers Unknown Device Unknown Device Unknown Device Unknown Device I'm certain I've done something horribly wrong...My question to you is...1. How can I fix this?2. in the event that I am unable to fix this, is it possible that restoring the computer to factory settings would do the trick?

Hello 15lrobin It would be more helpful if you tell us what computer model number you have and what the operating system is, so that the info we give can be more precise.

Internet Explorer 9 no longer works after an uninstall of HP Support Centre

Internet Explorer 9 no longer works after an uninstall of HP Support Centre and drivers for 3 HP All-in-One printers (psc1310, C4180, F4200). Intend to re-install for just C4180. I selected option to remove for all related software, though the HP Update and Photosmart Essentials have been left. IE9 stops working when launched (even when launched with no add-ons and with Protected Mode disabled and Advanced Settings restored) and regardless of initial URL. If I remove the IE9 update then IE8 works fine. I tried re-installing IE9 update, twice, and it continues to fail.
I’m running Vista 32 Home Premium SP2 on Samsung Q210 with Norton 360 v5, SpywareBlaster and Spybot - Search & Destroy.
This question was solved.
View Solution.

I now believe the problem with IE9 was not related to HP, but to a Windows Update replacement to the “Intel Corporation - Display - Mobile Intel(R) 4 Series Express Chipset Family” drivers: Intel Corporation Display software update released in February, 2011 (useless link http://winqual.microsoft.com/support/?driverid=20411791). IE9 started working OK when I set “Use software rendering instead of GPU rendering*” (see http://forums.whirlpool.net.au/archive/1678709 with reference to “faulting module igdumdx32.dll”), so will now investigate removing that update.
Sorry to have cast aspersions on HP. MS did this to themselves, as usual.

ITunes (Win7 x64) is no longer opening after the latest version update

iTunes (Win7 x64) is no longer opening after the latest version update - I have attempted an un/reinstall - can anyone offer other suggestions?
I am running Windows 7 64-bit, and am trying to reinstall the 64-bit iTunes from the iTunes website. I previously have had this working for the last few years with no major issues, the Apple Software Updater has been pestering me for some time so I finally got it to update. However now iTunes will not start, if I select the icons nothing happens. There are no iTunes applications running in the background in Task Manager either.
I look forward to your suggestions.
Thanks,
James.

1. First check if this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.
2. If that fails, refer to following article to remove SC Files
http://support.apple.com/kb/TS2363
3. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REAPIR.

Drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

Nothing. It's nothing to do with PSE; this is a limitation of Photos, as is the loss of being able to use an external editor without exporting copies of your images.

HP OMEN Control Software No Longer Works After Windows 10 Upgrade

HP OMEN Control no longer works after the recent Windows 10 update. Profile switching, keyboard LED colors, zones, fn key options, etc. no longer respond at all. I've found references to this issue during Windows 10 beta testing. Is there a temporary workaround? Will there be a driver update to remedy this problem? Thanks.

I just purchased a new 2015 refurbished PC. It worked great with Windows 8.1. Upon installing Windows 10, The Omen control did not work as well as the fan. Really - hardware failure. Give us a break. So, I went back to Windows 8.1. Also this year, I purchased an Envy X2. This PC included a bluetooth keyboard that kept detatching. Again - REALLY, the keyboard doesn't work. That's a pretty important part of the PC. I searched the forum for answers and all I found was the same old line that HP was working on it. I found meesages over a year old that had this same problem. So, back it went to Best Buy. I used to really like HP computers, but now, I can't say that anymore. So, do I trust HP to fix this in a timely manner, NO. Why - because they had to know about this issue alrady for quite a while. And, they did not fix it. I really hope they prove me wrong.!! I will give them 1 more week to fix it. After that, the PC will be returned. And HP PCs will be off my scratched off my list, except maybe the HP Spectre X360. To my amazement, I am even considering a MacBook Pro. Funny thing - the Spectre X360 is supposed to be a great laptop, But, Microsoft was heavily involved in the design process. That is certainly not an HP confidence buider. HP - THIS IS YOUR TIME TO "STEP UP TO THE PLATE" and fix this mess. TImes like these are opportuniies to win over customers or loose customers to the competiion. I really want to keep this PC. It is by your response to this problem that will determine the outcome.

Scanner does not work after installiing snow leopard.

I get this message sorry scanner could not be initialised (scanner not Found) I tried going on HP site to re download the driver but to no avail can someone please help me this is driving me crazy.

LillyMoss wrote:
Reviving this conversation. My Canoscan 8400f no longer works after upgrading to snow leopard, and there is no new driver for this machine. As an artist, I'm dead in the water. I need to buy a new scanner 9x12 or 12x17 and I'm looking for suggestions for any scanner of that size that is compatible. Budget about $1000. Thanks! Lilly
You might find VueScan of use: http://www.hamrick.com/

IPad app no long works after upgrading to iOS 7.1.1

iPad app no long works after upgrading to iOS 7.1.1

Did you try deleting then reinstalling the app? Sometimes developers will need to update their apps for compatibility. If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

PSE 7 Win Vista x64: Scanner no longer works after reinstall

Similar Messages

Maybe you are looking for